DOCSLIB.ORG

Maximus II Windows 10 (32-Bit) Firmware Instructions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Maximus II Windows 10 (32-Bit) Firmware Instructions Maximus II Windows 10 (32-bit) Firmware Instructions Preparation You will need the following: - A USB Flash Drive (16GB that is 2.0 or 3.0) - File “Win10 Install x86” (which can be found HERE) - Your device’s Firmware (which can be found HERE) - A PC that is Windows 7 or higher - A .RAR file-extracting program (7-zip, etc.) - UltraISO (which can be found HERE) 1.) Download and extract the file: “WIN10 INSTALL x86”. 2.) Download and install UltraISO (detailed installation instructions can be found HERE). Once installed, open UltraISO. 3.) Insert your USB Flash Drive into your PC. 4.) In the UltraISO menu, select “File” > “Open”. 5.) You will then be asked to select a file (like the image below). Look for your Win10 Installation Tool folder you extracted in step 1 and select “WINPE_X86_AUTO.” 6.) In the UltraISO menu, select “Bootable” > “Write Disk Image”. If prompted: “Do you want to allow this app to make changes to your device?” select “Yes”. 7.) For Disk Drive, make sure the USB you are using is selected. Select the “Hidden” option for “Hide Boot Partition” (highlighted in RED), then click “Write” (highlighted in GREEN) 8.) After selecting “Write”, you may be asked if you want to continue. Select “Yes”. 9.) The program will make the USB bootable for your device and a progress bar will appear. When the message “Burn successful!” appears in the Message screen and “Done: 100%”, the process is complete. 10.) Two folders may open after you have finished making your USB Bootable (“WINPE” and “USB_DISK”). “WINPE” has files that will make your USB bootable. “USB_DISK” will need to be reformatted in order to store your firmware. 11.) In order to get the firmware onto your USB, you will need to reformat the drive to NTFS. Right click the “USB_DISK” and select “Format”. 12.) When you format your device, make sure the following options are selected (highlighted in RED). Make sure you rename your “Volume label” to “winpe”, then select “Start” to begin reformatting. 13.) A warning prompt may appear, click “Ok” to continue formatting. Once the drive is formatted, the following prompt should appear: 14.) You should now be able to transfer the firmware onto your flash drive. 15.) Check the bottom of your laptop for the serial number. Download the firmware file matching the first 4 digits of your serial number. You can find the firmware HERE. 16.) Once you have downloaded the correct firmware, extract the .RAR file, it should give you the files listed below. (NOTE: A folder named “TEST_TOOL” may or may not be included. It is not needed to complete the installation) 17.) Select all folders, and copy them onto the USB. This will take several moments. 18.) USB is now ready for use. Installation 1.) Make sure your device is powered off. Connect the flash drive, keyboard and device using a hub. If you’re installing on an iVIew laptop, make sure that the keyboard switch is set to (Unlock) Position. 2.) Power on the device while rapidly pressing ESC on the keyboard. 3.) A Boot menu will pop up. Press the Right Arrow Key to highlight BOOT MANAGER and press Enter. 4.) When the boot menu pops up, press the down arrow key to select your USB Flash drive and press Enter. 5.) Installation will begin. The procedure might take more than 20 minutes. 6.) Device will reboot automatically. If device does not reboot, type EXIT at the command prompt and press Enter. 7.) “System Preparation Tool” will pop up, Click “OK”. 8.) Device is ready for use. .
Load more

Recommended publications
  • Virtual Disk File Virtualbox Ubuntu Download Christian Engvall
    virtual disk file virtualbox ubuntu download Christian Engvall. How to install Ubuntu on a VirtualBox virtual machine. It’s very simple and won’t cost you a dime. Don’t forget to install the guest additions at the end. Virtualbox. Virtualbox is a virtualization software that is free and open source. Start by downloading and installing it. It runs on Windows, MacOS, Linux distributions and Solaris. Ubuntu. Ubuntu is a popular Linux distribution for desktops. It’s free and open source. So go ahead and download Ubuntu. 1. Creating a virtual machine in Virtualbox. Fire up VirtualBox and click on the New button in the top left menu. When i started to type Ubuntu, VirtualBox automatically set type to linux and version to Ubuntu. Name and operating system - VirtualBox. Next step is to set the amount of memory that will be allocated. VirtualBox will recommend you a number. But you can choose anything you’d like. This can be changed later if the virtual machine runs slow. Memory size - VirtualBox. Next you select a size of the hard disk. 8 gb that VirtualBox recommends will work fine. Now click Create . Harddisk size - VirtualBox. Select VDI as hard disk file type. Hard disk file type - VirtualBox. Next use dynamically allocated when asked. Storage on physical hard disk - VirtualBox. Set the disk size to the standard 8GB. Ubuntu file location - VirtualBox. 2. Installing Ubuntu on the new virtual machine. Now when the virtual machine is created it’s time to mount the Ubuntu ISO and install it. Click on settings with the newly created virtual machine selected.
    [Show full text]
  • User Guide Laplink® Diskimage™ 7 Professional
    http://www.laplink.com/contact 1 ™ E-mail us at [email protected] Laplink® DiskImage 7 Professional User Guide Tel (USA): +1 (425) 952-6001 Tel (UK): +44 (0) 870-2410-983 Fax (USA): +1 (425) 952-6002 Fax (UK): +44 (0) 870-2410-984 ™ Laplink® DiskImage 7 Professional Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: [email protected] Tel (USA): +1 (425) 952-6001 Fax (USA): +1 (425) 952-6002 Tel (UK): +44 (0) 870-2410-983 User Guide Fax (UK): +44 (0) 870-2410-984 Laplink Software, Inc. 600 108th Ave. NE, Suite 610 Bellevue, WA 98004 U.S.A. Copyright / Trademark Notice © Copyright 2013 Laplink Software, Inc. All rights reserved. Laplink, the Laplink logo, Connect Your World, and DiskImage are registered trademarks or trademarks of Laplink Software, Inc. in the United States and/or other countries. Other trademarks, product names, company names, and logos are the property of their respective holder(s). UG-DiskImagePro-EN-7 (REV. 5/2013) http://www.laplink.com/contact 2 ™ E-mail us at [email protected] Laplink® DiskImage 7 Professional User Guide Tel (USA): +1 (425) 952-6001 Tel (UK): +44 (0) 870-2410-983 Fax (USA): +1 (425) 952-6002 Fax (UK): +44 (0) 870-2410-984 Contents Installation and Registration System Requirements . 1 Installing Laplink DiskImage . 1 Registration . 2 Introduction to DiskImage Overview of Important Features . 2 Definitions . 3 Start Laplink DiskImage - Two Methods . 4 Windows Start . .4 Bootable CD . .4 DiskImage Tasks One-Click Imaging: Create an Image of the Entire Computer .
    [Show full text]
  • Disk Image Active@ Disk Image User's Guide
    Copyright © 2009, LSOFT TECHNOLOGIES INC. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from LSOFT TECHNOLOGIES INC. LSOFT TECHNOLOGIES INC. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of LSOFT TECHNOLOGIES INC. to provide notification of such revision or change. LSOFT TECHNOLOGIES INC. provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. LSOFT may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. All technical data and computer software is commercial in nature and developed solely at private expense. As the User, or Installer/Administrator of this software, you agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. Active@ Disk Image and the Active@ Disk Image logo are trademarks of LSOFT TECHNOLOGIES INC. LSOFT.NET logo is a trademark of LSOFT TECHNOLOGIES INC. Other brand and product names may be registered trademarks or trademarks of their respective holders. Document version: 1.06 2 Active@ Disk Image User’s Guide Contents 1 Product Overview ..................................................................................... 5 1.1 Overview and List of Features............................................................... 5 1.2 System Requirements.......................................................................... 6 1.3 Supported File Systems ......................................................................
    [Show full text]
  • Chapter 3. Booting Operating Systems
    Chapter 3. Booting Operating Systems Abstract: Chapter 3 provides a complete coverage on operating systems booting. It explains the booting principle and the booting sequence of various kinds of bootable devices. These include booting from floppy disk, hard disk, CDROM and USB drives. Instead of writing a customized booter to boot up only MTX, it shows how to develop booter programs to boot up real operating systems, such as Linux, from a variety of bootable devices. In particular, it shows how to boot up generic Linux bzImage kernels with initial ramdisk support. It is shown that the hard disk and CDROM booters developed in this book are comparable to GRUB and isolinux in performance. In addition, it demonstrates the booter programs by sample systems. 3.1. Booting Booting, which is short for bootstrap, refers to the process of loading an operating system image into computer memory and starting up the operating system. As such, it is the first step to run an operating system. Despite its importance and widespread interests among computer users, the subject of booting is rarely discussed in operating system books. Information on booting are usually scattered and, in most cases, incomplete. A systematic treatment of the booting process has been lacking. The purpose of this chapter is to try to fill this void. In this chapter, we shall discuss the booting principle and show how to write booter programs to boot up real operating systems. As one might expect, the booting process is highly machine dependent. To be more specific, we shall only consider the booting process of Intel x86 based PCs.
    [Show full text]
  • How to Create a Custom Live CD for Secure Remote Incident Handling in the Enterprise
    How to Create a Custom Live CD for Secure Remote Incident Handling in the Enterprise Abstract This paper will document a process to create a custom Live CD for secure remote incident handling on Windows and Linux systems. The process will include how to configure SSH for remote access to the Live CD even when running behind a NAT device. The combination of customization and secure remote access will make this process valuable to incident handlers working in enterprise environments with limited remote IT support. Bert Hayes, [email protected] How to Create a Custom Live CD for Remote Incident Handling 2 Table of Contents Abstract ...........................................................................................................................................1 1. Introduction ............................................................................................................................5 2. Making Your Own Customized Debian GNU/Linux Based System........................................7 2.1. The Development Environment ......................................................................................7 2.2. Making Your Dream Incident Handling System...............................................................9 2.3. Hardening the Base Install.............................................................................................11 2.3.1. Managing Root Access with Sudo..........................................................................11 2.4. Randomizing the Handler Password at Boot Time ........................................................12
    [Show full text]
  • Dropdmg 3.6.2 Manual
    DropDMG 3.6.2 Manual C-Command Software c-command.com February 16, 2021 Contents 1 Introduction 4 1.1 Feature List..............................................4 2 Installing and Updating 6 2.1 Requirements.............................................6 2.2 Installing DropDMG.........................................7 2.3 Updating From a Previous Version.................................7 2.4 Reinstalling a Fresh Copy......................................8 2.5 Uninstalling DropDMG.......................................9 2.6 Security & Privacy Access......................................9 3 Using DropDMG 13 3.1 Basics................................................. 13 3.2 Making a Bootable Device Image of a Hard Drive......................... 14 3.3 Backing Up Your Files to CD/DVD................................ 16 3.4 Burning Backups of CDs/DVDs................................... 17 3.5 Restoring Files and Disks...................................... 18 3.6 Making Images With Background Pictures............................. 19 3.7 Protecting Your Files With Encryption............................... 20 3.8 Transferring Files Securely...................................... 21 3.9 Sharing Licenses and Layouts.................................... 21 3.10 Splitting a File or Folder Into Pieces................................ 22 3.11 Creating a DropDMG Quick Action................................ 22 4 Menus 23 4.1 The DropDMG Menu........................................ 23 4.1.1 About DropDMG...................................... 23 4.1.2 Software
    [Show full text]
  • Oracle Virtualbox Installation, Setup, and Ubuntu Introduction
    ORACLE VIRTUALBOX INSTALLATION, SETUP, AND UBUNTU INTRODUCTION • VirtualBox is a hardware virtualization program. • Create virtual computers aka virtual machines. • Prototyping, sandboxing, testing. • The computer that VirtualBox is installed on is called the “host”, and each virtual machine is called a “guest”. PREREQUISITES Since virtual machines share resources with the host computer, we need to know what resources we have available on our host. • Click “Type here to search”. • Search for “System Information”. • Note the number of processor cores and the amount of RAM installed in your host. PREREQUISITES • Expand “Components”. • Expand “Storage”. • Select “Drives”. • Note the amount of free space available on your host. Every computer is different, so how we will need to balance these resources between our host and guest systems will differ. DOWNLOADING VIRTUALBOX • VISIT VIRTUALBOX.ORG • SELECT THE CORRECT PACKAGE • CLICK THE DOWNLOAD LINK. FOR YOUR HOST. INSTALLING VIRTUALBOX • Browse to where you downloaded VirtualBox and run the installer. • All default options will be fine. Simply follow the prompts. INSTALLING VIRTUALBOX • CLICK “FINISH”. • VIRTUALBOX INSTALLED! SETTING THINGS UP Before we build our first virtual machine, we need to download an operating system to install as our “guest”. • Visit Ubuntu.com • Click “Download”. • Select the current Ubuntu Desktop “LTS” release. • LTS releases focus on stability rather than cutting edge features. SETTING THINGS UP • IN VIRTUALBOX, CLICK “NEW”. • NAME THE VIRTUAL MACHINE. SETTING THINGS UP Here’s where we will need the system resources information that we looked up earlier. Each virtual machine functions like a separate computer in and of itself and will need to share RAM with the host.
    [Show full text]
  • How to Install and Use Virtualbox on Windows 10 1. Download
    How to install and use VirtualBox on Windows 10 1. Download VirtualBox, Choose “Windows hosts” https://www.virtualbox.org/wiki/Downloads a. You can watch this YouTube video for reference https://www.youtube.com/watch?v=8mns5yqMfZk 2. Find and download the iso file you’d use, e.g., ubuntu. Following this link to download an *.iso file, which is a CD image, e.g., “ubuntu-20.04-desktop-amd64.iso” Usually you’d pick the LTS (Long Term Support) version. The .iso file is very large, 2.6 GB for version 20.04. So it may take some time to download it. https://ubuntu.com/download/desktop You might consider to save this iso file in a folder that has all your VMs, e.g., c:\users\your name\VirtualBox\ so it is easier to retrieve them later. ​ 3. Set up and boot from an iso (optical disk image) file Oracle VM - How To Load and Boot from ISO - VirtualBox https://www.youtube.com/watch?v=KZ_uqCtgaKI In this process, the key is to set the “storage” option to tell VM to boot from the *.iso file you downloaded from step 2. You will have an option to specify the amount of memory and the disk space for the VM. In general, take the default of 1 GB memory (1024 MB) and 10 GB disk should work for most. If you plan to use more than gcc or Makefile, it may be a good idea to set the disk space to be 20 GB. 4. Start the VM with the newly installed boot CD, e.g., ubuntu to set up the ubuntu system on your VM.
    [Show full text]
  • Active@ Livecd User Guide Copyright © 1999-2015, LSOFT TECHNOLOGIES INC
    Active@ LiveCD User Guide Copyright © 1999-2015, LSOFT TECHNOLOGIES INC. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from LSOFT TECHNOLOGIES INC. LSOFT TECHNOLOGIES INC. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of LSOFT TECHNOLOGIES INC. to provide notification of such revision or change. LSOFT TECHNOLOGIES INC. provides this documentation without warranty of any kind, either, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. LSOFT may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. All technical data and computer software is commercial in nature and developed solely at private expense. As the User, or Installer/Administrator of this software, you agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. LSOFT.NET logo is a trademark of LSOFT TECHNOLOGIES INC. Other brand and product names may be registered trademarks or trademarks of their respective holders. 2 Active@ LiveCD User Guide Contents 1 Product Overview................................................................................................................ 4 1.1 About Active@ LiveCD .................................................................................................. 4 1.2 Requirements for Using Active@ Boot Disk .................................................................... 6 1.3 Downloading and Creating Active@ LiveCD.................................................................... 6 1.4 Booting from a CD, DVD or USB Media .........................................................................
    [Show full text]
  • Disk Imaging Guide
    Disk Imaging Guide Tom Ensom Time-based Media Conservation, Tate Document Last Updated: January 2021 Document Version: 01.00 Document Licence: CC BY-SA 4.0 Contents 1 Document Background ....................................................................................................... 2 2 Introduction to Imaging ....................................................................................................... 3 3 Optical Media Imaging ........................................................................................................ 3 3.1 Optical Disc Structures ................................................................................................ 4 3.2 Optical Drives .............................................................................................................. 4 3.3 Optical Image Formats ................................................................................................ 4 3.3.1 ISO ....................................................................................................................... 5 3.3.2 BIN/CUE ............................................................................................................... 5 3.4 Optical Media Imaging Workflow ................................................................................ 5 3.5 Optical Media Imaging Troubleshooting ..................................................................... 8 3.5.1 Optical Read Errors ............................................................................................. 8 3.5.2 Audio
    [Show full text]
  • Backing up and Transferring Mail Manager Files
    eFulfillment Downloading and Mounting Images Overview Follow this document in order to download and mount BCC Software’s image files (ISO or UDF) via the Customer Portal. These image files replace the physical media shipped for general releases and data files. You may burn the images to DVD or CD and install them as you have in the past, or open them directly from your PC using a virtual drive. Prerequisites If you have not already done so, please contact BCC Software Technical Support at 800.624.5234 to register for the Customer Portal. Important: You must agree to use the Software only within the United States, its territories and possessions. You must have a virtual drive installed on your system in order to mount the files. A virtual drive is a device that appears to be an ordinary physical disk drive to the operating system. A virtual drive may emulate any type of physical drive, such as CD or DVD drive. Be certain that the virtual drive supports the UDF file format. We recommend the following virtual drives. Virtual CloneDrive freeware is available for download from Elaborate Bytes. https://www.elby.ch/en/products/vcd.html We also suggest WinCDEmu open source software. http://wincdemu.sysprogs.org/ Important: BCC Software does not produce or support any virtual clone drives. Be sure to read license agreements carefully, and comply with any internal IT policies your business may have. It is recommended that you turn off pop-up blockers prior to downloading files. Technical Support: 800.624.5234 Email: [email protected] www.bccsoftware.com 2 Installing the Virtual CloneDrive Note: This section is specific to installing Virtual CloneDrive from SlySoft.
    [Show full text]
  • Writing ISO Files Cds
    R1Soft Continuous Data Protection®, Documentation, Version 3.18.2 Writing ISO Files CDs Once you have downloaded the ISO file (Obtaining Live CD Server, Obtaining Live CD Agent), you need to write it to CD. Writing ISO Files in Windows 7 | Writing ISO Files in Windows XP and Vista | Writing ISO Files in Linux (Gnome) | Writing ISO Files in Linux (KDE) Writing ISO Files in Windows 7 Windows 7 can write ISO files to the CD by itself, without any third-party software. Follow the instructions below to write ISO file to CD in Windows 7. 1. Insert a blank CD into the drive, then right-click ISO file in Windows Explorer and select the "Burn disk image" option from the context menu. 2. The Windows Disk Image Burner window will appear. 1 R1Soft Continuous Data Protection®, Documentation, Version 3.18.2 3. Click on the "Burn" button. 4. The burning process will start immediately. During the process you will see the progress on the progress bar. 5. On most modern CD-recorders the process should not last more than five minutes. When the process is finished, the Windows Disk Image Burner window will report about this and the CD will be ejected from the drive. You can take this CD and boot from it. 2 R1Soft Continuous Data Protection®, Documentation, Version 3.18.2 Proceed to booting the server you want to restore from this CD. See Booting Server From CD, Configuring Bare-Metal Restore Server. Writing ISO Files in Windows XP and Vista Unlike Windows 7, Windows XP and Vista cannot write ISO files to CDs by itself.
    [Show full text]