May is Mental Matters Month Photo Booth Activity Instructions Want to capture all the faces of support at your event? Try an Each Mind Matters photo booth! Here is everything you need to do this activity to continue to spread the mental health movement. Create Your Own Backdrop Toolkit includes: Decorate a wall and provide different lime green props • Activity instructions and ideas people can pose with. A simple way to set up an area is to get a lime green table cloth and place it on the wall. Decorate • An 11x14 Each Mind Matters frame it with Each Mind Matters stickers, lime green ribbons and even balloons and streamers. The Photo Challenge During the month of May, Each Mind Matters is holding a photo challenge! Winners* will receive a lime green gift basket with items from the Each Mind Matters store. Here is how to enter:

• At your next event make sure the Each Mind Matters frame is available and encourage people to take a photo or a .

• Have attendees put the frame up to their face and snap a picture.

• Encourage them to upload their photos to their social Thanks Orange County for sharing your successful media channel, tag @EachMindMatters and add the photo booth pictures! hashtags #EachMindMatters and #MillionsLikeMe.

• One winner will be selected each week and featured on our Each Mind Matters Facebook, Twitter and . Build a Photo Booth

*Winners must live in the United States. If you’re up for a challenge why not build your own photo booth? Our friends at the Fresno County Department of Behavioral Health have created step-by-step instructions on how to create your own photo booth with PVC pipes. Check out their spec sheet on the next page.

Funded by counties through the voter-approved Mental Health Services Act (Prop. 63).

Page 1 of 3 7 – 51” inch sections of 1 inch PVC pipe (we have 8 but only use 7 poles are used as can be seen in Step 1)

8 – 40” inchFresno sections of ¾ inchCounty PVC pipe Selfie Booth Spec Sheet

2 - 51” inch sections of ¾ in PVC pipe

8 – 1/2 in. x 3/4 in. Schedule 40 PVC Reducing Male Adapter (Model #C436-074)

8 – 1 in. x 1 in. x 1/2 in. Schedule 40 PVC Reducer Side Outlet 90-Degree Elbow (Model #C414-130)

4 – 3/4 in. Schedule 40 PVC Tee (Model #C401-007)

1 – 8 oz. container of PVC cement (Model # 310133)

1 - Ratcheting PVC Cutter (Model # T012 X)

3 Panels made from Heavy Felt Material

The panels are roughly 55 ½ inches wide by 85 inches high (Add 12 inches to height for pockets)

1 Large roll of Velcro stripping with sticky backing 1” PVC Pipe – 51” Images of Hope & Recovery printed out, cut out, laminated Used for the Top, Bottom (Panels will go on the Top and bottom Poles)

Top 3/4” PVC Pipe – 51” Middle Side Support

Bottom 3 – Side Panels ¾” PVC Pipe – 40”

Used for all corners

Middle (PVC Tee)

Funded by counties through the voter-approved Mental Health Services Act (Prop. 63).

Page 2 of 3 Step 1 Step 2

Step 3 Step 4

Step 5 Step 6 Step 7

Funded by counties through the voter-approved Mental Health Services Act (Prop. 63).

Page 3 of 3