Merlin Merlin Module Series Ule Series
Total Page:16
File Type:pdf, Size:1020Kb
Merlin Module Series Tensioned and non-tensioned models Electric/Motorized Front Projection Screen User’s Guide Important safety and warning precautions Rev.101909-JA 1 www.elitescreens.com Important Safety Instructions 1. Be sure to read this manual before use and follow the procedures specifies.d: Please retain this manual for future reference. To avoid any damage, do not use any accessories not recommended by the manufacturer. Handle the device carefully during transportation to avoid impact. Do not put the device on uneven or inclined surfaces. Do not put heavy objects on the power cord and affix the power cord properly to avoid someone tripping over it. Never over load the power cord to prevent electrical shock or fire. Guard the device from any liquid or foreign object to avoid electrical shock or f ire due to lose contact or short circuit. 2. If any accessories need to be replaced, be careful to avoid a short circuit. 3. There are no user serviceable parts in the device. Nobody except authorized technicians can open this device. To prevent the risk of electrical shock or fire, protect this device against moisture and rain. Make sure that the power source this device is connected to has a continuous power flow. T he rating label on the product indicates the rated voltage. Do not handle the power plug when your hands are wet or your feet are in contact with 4. Do not use this device under the following circumstances: . Disconnect the power cord under the condition of heavy wind, rain, thunder or lightning. Avoid direct sunshine, rain shower or moisture. Keep away from fire sources and high temperature to prevent this device from overheating. Cut off the power supply first before transportation or maintenance. Rev.101909-JA 2 www.elitescreens.com Merlin Module Series Accessories List AAA Batteries ZR800D Universal IR 3-way switch IR (Infrared) RF (Radio Remote Control (RJ45 Remote Control Frequency) Connection) Remote Control Operation The Merlin Module screen can be used by itself on a flat, level surface or it can be combined with Elite’s Merlin media stand housing as a fully assembled product. The power connection is located on the screen module’s rear right-hand leg support and feeds conveniently through the cabinet housing to its designated power source. 1. Begin by plugging in the power Power switch cord to the power supply located Power Supply on the left side of the Merlin Series screen. Then plug the power cord into your wall socket. 2. Next, flip the power switch to turn on the Merlin Module screen. 3-way switch Rev.101909-JA 3 www.elitescreens.com 3. Use the included IR, RF remote or 3-way switch controller box to operate the screen. IR “eye” sensor Note: Always point at the IR “eye” sensor when using the IR or the ZR800D remote. Infrared-Sensitive Safety Device (ISSD) This is a safety feature to prevent injuries caused by fingers, hair, etc. getting caught up in the screen’s closing mechanism. If the small infrared light beams are obstructed, the screen closing operation will halt immediately. Rev.101909-JA 4 www.elitescreens.com Merlin Module Tension Series Dimensions Table Unit: mm Screen L/R Base Base Diagonal Cabinet View Overall View fully Cabinet Cabinet Black Foot Foot Model Size/Aspect Length Width Height Height deployed Height Width C1 Masking Width Height Ratio (A2) (A) (B2) (B) height (B3) (C) (A1) (A3) (B4) (B1) MFTE78H-C 78" (16:9) 2400.0 1727.2 50.0 210.0 1956.4 977.9 1581.4 375 190 350 60 MFTE84H-C 84"(16:9) 2400.0 1859.6 50.0 210.0 2031.1 1046.1 1656.1 375 190 350 60 MFTE92H-C 92"(16:9) 2400.0 2036.8 50.0 210.0 2080.7 1145.7 1705.7 375 190 350 60 Unit: inch MFTE78H-C 78" (16:9) 94.5 68.0 2.0 8.3 77.0 38.5 62.3 14.8 7.5 13.8 2.4 MFTE84H-C 84"(16:9) 94.5 73.2 2.0 8.3 80.0 41.2 65.2 14.8 7.5 13.8 2.4 MFTE92H-C 92"(16:9) 94.5 80.2 2.0 8.3 81.9 45.1 67.2 14.8 7.5 13.8 2.4 Merlin Module Series Dimensions Table Unit: mm L/R Base Screen Base Diagonal Cabinet View Overall View Cabinet Cabinet Black Foot fully Foot Model Size/Aspect Length Width Height Height Height Width C1 Masking Width deployed Height Ratio (A2) (A) (B2) (B) (B3) (C) (A1) (A3) height (B1) (B4) MFE84H-C 84"(16:9) 2400.0 1859.6 50.0 210.0 2031.1 1046.1 1656.1 375 190 350 60 MFE92H-C 92"(16:9) 2400.0 2036.8 50.0 210.0 2080.7 1145.7 1705.7 375 190 350 60 Unit: inch MFE84H-C 84"(16:9) 94.5 73.2 2.0 8.3 80.0 41.2 65.2 14.8 7.5 13.8 2.4 MFE92H-C 92"(16:9) 94.5 80.2 2.0 8.3 81.9 45.1 67.2 14.8 7.5 13.8 2.4 *Measurement dimensions are intended as a reference only and subject to change without notice Note:Data Error may be ±1" Rev.101909-JA 5 www.elitescreens.com Caution 1. The Merlin Module furniture housing should only be cleaned with dry wipes appropriate for furniture care. 2. The screen material may be cleaned with a damp cotton cloth but caution should be taken to avoid getting moisture down into the rolled material or mechanical functions of the screen. 3. For optimal product longevity, put the screen in the down (closed) position when not in use. 4. Avoid touching the screen material either with fingers or any other foreign objects (Exception, see #2. Cleaning methods). 5. To avoid heat damage or fire, keep away from open flames or excessively hot (beyond human endurance) heat sources. 6. When in use, please don’t reach into the screen case. 7. Do not disassemble your screen and attempt your own troubleshooting. Contact Elite Screens immediately regarding any technical difficulties (Tel USA: 877.511.1211 / Web (RMA/Warranty): http://www.elitescreens.com/service_form.htm 8. Please treat your Merlin with the same care as any other piece of fine furniture. 9. Prolonged direct sunlight destroys synthetic materials. Please do not keep any projection screen (Elite or other Manufacturer) in direct sunlight for a prolonged period of time. Troubleshooting In case of a malfunction 1. Cease operation 2. Disconnect (unplug) from power source 3. Contact Elite Screens immediately. (http://www.elitescreens.com/service_form.htm or Ph: 877.511.1211 If the screen does not go up/down 1. Check the power cord and make sure that it is connected to a good power source. 2. Check the infrared-sensitive safety device (ISSD) for foreign items/obstructions? 3. Check the IR and RF remote control’s battery life 4. Try to up/down the 3-way switch on left part of screen case. If all attempts to rectify the problem are unsuccessful, Contact Elite Screens Online RMA (http://www.elitescreens.com/service_form.htm or Ph: 877.511.1211 For local support or Elite Screens contact, please visit www.elitescreens.com Rev.101909-JA 6 www.elitescreens.com .