University of Texas at El Paso DigitalCommons@UTEP Open Access Theses & Dissertations 2013-01-01 The evelopmeD nt of Self-Supported Electromechanical Structures Using Fused Deposition Modeling Jorge Ramos-Almeida University of Texas at El Paso,
[email protected] Follow this and additional works at: https://digitalcommons.utep.edu/open_etd Part of the Mechanical Engineering Commons Recommended Citation Ramos-Almeida, Jorge, "The eD velopment of Self-Supported Electromechanical Structures Using Fused Deposition Modeling" (2013). Open Access Theses & Dissertations. 1714. https://digitalcommons.utep.edu/open_etd/1714 This is brought to you for free and open access by DigitalCommons@UTEP. It has been accepted for inclusion in Open Access Theses & Dissertations by an authorized administrator of DigitalCommons@UTEP. For more information, please contact
[email protected]. THE DEVELOPMENT OF SELF-SUPPORTED ELECTROMECHANICAL STRUCTURES USING FUSED DEPOSITION MODELING JORGE RAMOS-ALMEIDA Department of Mechanical Engineering APPROVED: Ryan B. Wicker, Ph.D., Chair Norman Love, Ph.D. Eric MacDonald, Ph.D. Benjamin C. Flores, Ph.D. Dean of the Graduate School Copyright © by Jorge Ramos-Almeida 2013 Dedication I would like to dedicate my thesis to my parents and sister, who have encouraged and supported me throughout my education THE DEVELOPMENT OF SELF-SUPPORTED ELECTROMECHANICAL STRUCTURES USING FUSED DEPOSITION MODELING by JORGE RAMOS-ALMEIDA, B.S.M.E. THESIS Presented to the Faculty of the Graduate School of The University of Texas at El Paso in Partial Fulfillment of the Requirements for the Degree of MASTER OF SCIENCE Department of Mechanical Engineering THE UNIVERSITY OF TEXAS AT EL PASO December 2013 Acknowledgements I would like to express my sincere gratitude to my advisor Dr.