DOCSLIB.ORG

Brakes, Ignition Coils, Throttle Bodies, Filters, Rotating Machines, Spark

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Brakes, Ignition Coils, Throttle Bodies, Filters, Rotating Machines, Spark Brakes, Ignition Coils, Throttle Bodies, Filters, Rotating Machines, Spark Plugs, Wiper Blades and High Pressure Pumps Automotive Aftermarket North America New Product Communication | August 2015 Bosch Blue Disc Brake Pads Product Category Overview 3 Part Numbers 3.0 Million Units in Operation Robert Bosch LLC is a global supplier of automotive systems and components to original equipment manufacturers and OE-style, multi-layer shims for superior noise dampening the independent aftermarket. This month, Bosch Automotive Towel-wrapped on selected applications for added protection and value Late-model Domestic and Asian coverage Aftermarket North America announces the availability of 31 new part numbers in the brakes, ignition coils, throttle bodies, filters, rotating machines, spark plugs, wiper blades, Bosch Ignition Coils and high pressure pumps categories. Brakes 2 Part Numbers 1.3 Million Vehicles in Operation Three new Bosch Blue Brake Pad sets are being added to Direct fit application the Bosch Brake portfolio. These new releases offer high UIO Meet or exceed manufacturer specifications coverage for late-model Domestic and Asian vehicles. Ignition Coils Two new ignition coils are being added to the Bosch portfolio. Bosch Throttle Bodies All Bosch ignition coils are built to meet or exceed OE 1 Part Numbers 509K Vehicles in Operation specifications and are known industry wide for their reliability and performance. Actual OE product Plug and play Throttle Bodies One new throttle body is being released from the engine management group. This throttle body covers late-model Bosch Premium Oil Filters Domestic vehicles. Filters 11 Part Numbers 5.2 Million Vehicles in Operation Premium engine performance requires a premium oil filter. To Premium media provides 99% filtration efficiency add to the success of the Bosch Premium Oil Filter line, eight new Media designed to hold 14 grams of dirt cartridge-style SKUs have been added covering many European vehicle applications, along with three additional spin-on filters. Rotating Machines Bosch Rotating Machines Bosch is releasing one remanufactured alternator and two 3 Part Numbers 72K Vehicles in Operation remanufactured starters to its rotating machines line, adding coverage for late-model Asian and European vehicles, including Meet or exceed manufacturer recommendation start/stop technology. Late-model coverage for Asian and European vehicles , including start/stop technology Spark Plugs Five new Bosch Spark Plug SKUs are being added to the spark plug line. These spark plugs feature the lastest in precious metal Bosch OE Fine Wire Spark Plugs technology and include: two OE Fine Wire Platinum part numbers, an OE Specialty Fine Wire Double Platinum part number and two 5 Part Numbers 1.7 Million Vehicles in Operation OE Specialty Fine Wire Iridium part numbers - one with copper ground electrode for RAM trucks with the 6.4L Hemi. OE fit, form and function Domestic, Asian and European coverage Wiper Blades Bosch is adding two new Aerotwin Wiper Blade Sets to its wiper blade portfolio. Bosch Aerotwin offers a direct OE replacement for Bosch Aerotwin Wiper Blades vehicles requiring specific connection types. These two new sets add coverage for late-model European vehicles. 2 Part Numbers 758K Vehicles in Operation High Pressure GDI Fuel Pumps Direct OE replacement Four new high pressure GDI (gasoline direct injection) fuel pumps Intergrated wind spoiler design are being added to the Bosch portfolio. The high-pressure pump is responsible for compressing the fuel supplied by the electric in-tank fuel pump to the pressure required for high-pressure Bosch High Pressure GDI Fuel Pumps injection, up to 20 MPa (200 bar). 4 Part Numbers 1.1 Million Vehicles in Operation Thomas Winter OE fit, form and function Vice President Late-model Domestic and European coverage Automotive Aftermarket Robert Bosch LLC Page 1 of 4 | 15071349 | August 2015 Bosch Blue Brake Pads New Product Communication — August 5, 2015 Bosch Part Catalog Part Description Pop Axle Application UIO Availability Number Code (US) BE1041H Bosch Blue Disc Bosch Blue Disc Brake A Rear 2004-2010 Infiniti QX56; 2005-2010 Jeep Commander; 2,005,888 Now Brake Pads Pad Set w/ Hardware 2005-2010 Jeep Grand Cherokee; 2004-2014 Nissan Armada; 2004-2014 Nissan Pathfinder; 2004-2014 Nissan Titan BE1548H Bosch Blue Disc Bosch Blue Disc Brake A Front 2013-2014 Nissan Leaf; 2013-2014 Nissan NV 200 52,252 Now Brake Pads Pad Set w/ Hardware BE1707 Bosch Blue Disc Bosch Blue Disc Brake A Rear 2014-2015 Chevrolet Silverado 1500; 2014 GMC Sierra 1500 918,735 Now Brake Pads Pad Set Bosch Ignition Coils New Product Communication — August 5, 2015 Bosch Part Catalog Part Description Pop Application VIO Availability Number Code (US) 00500 Ignition Coil Ignition Coil B 2000-2005 Volkswagen Jetta; 2000-2008 Volkswagen Golf IV; 294,803 Now 2000-2010 Volkswagen New Beetle; 2003-2010 Volkswagen New Beetle Cabriolet 00501 Ignition Coil Ignition Coil A 2007-2009 Mercedes-Benz C230; 2007-2009 Mercedes-Benz C230 4Matic; 1,016,743 Now 2007-2009 Mercedes-Benz C230 T-Modell; 2007-2009 Mercedes-Benz C280; 2005-2009 Mercedes-Benz C280 4Matic; 2009-2011 Mercedes-Benz C300; 2009-2011 Mercedes-Benz C300 4Matic; 2007-2010 Mercedes-Benz C350; 2007-2010 Mercedes-Benz C350 4Matic; 2008-2010 Mercedes-Benz Ci500 Coupe 4Matic; 2005-2009 Mercedes-Benz CLK350 Cabrio Contact your Bosch representative for complete application information. Bosch Throttle Body New Product Communication — August 5, 2015 Bosch Part Catalog Part Description Pop Application VIO Availability Number Code (US) 0280750498 Throttling Throttle Body 2013 Buick Encore; 2011-2013 Chevrolet Cruze; 2012-2013 Chevrolet Sonic 509,025 Now Device Bosch Premium Oil Filters New Product Communication — August 5, 2015 Bosch Part Catalog Part Description Pop Application VIO Availability Number Code (US) 3977 Premium Oil Premium Oil Filters N 2003-2006 Seat Alhambra; 1998-2006 Volkswagen Beetle; 2006 Volkswagen 183,391 Now Filters (Cartridge) Beetle Cabrio; 2006-2008 Volkswagen Crafter; 1999-2006 Volkswagen Golf; 1999-2005 Volkswagen Jetta; 2004-2005 Volkswagen Passat 3979 Premium Oil Premium Oil Filters N 2003-2013 Audi A3; 2006-2009 Audi A3 Quattro; 2008-2009 Audi TT; 379,498 Now Filters (Cartridge) 2004-2006 Audi TT Quattro; 2001-2008 Seat Alhambra; 2014 Volkswagen Beetle; 2007-2008 Volkswagen Bora; 2009-2011 Volkswagen CC; 2007-2008 Volkswagen Eos; 2001-2008 Volkswagen Eurovan; 2010-2014 Volkswagen Golf; 2002-2005 Volkswagen GTI; 2002-2014 Volkswagen Jetta; 2013-2014 Volkswagen Jetta Sportwagen Contact your Bosch representative for complete application information. 3980 Premium Oil Premium Oil Filters N 2008-2014 Lexus Is F; 2008-2014 Lexus LX570; 2008-2014 Toyota Land 777,840 Now Filters (Cartridge) Cruiser; 2008-2014 Toyota Sequoia; 2007-2014 Toyota Tundra 3981 Premium Oil Premium Oil Filters N 2006 Lexus GS300; 2007-2015 Lexus GS350; 2007-2015 Lexus GS450H; 1,013,914 Now Filters (Cartridge) 2008-2011 Lexus GS460; 2010-2014 Lexus GX460; 2006-2014 Lexus IS250; 2010-2013 Lexus IS250C; 2006-2014 Lexus IS350; 2010-2013 Lexus IS350C; 2007-2014 Lexus LS460; 2007-2013 Lexus LS460L; 2008-2014 Lexus LS600H L; 2010-2014 Toyota 4Runner; 2010-2014 Toyota FJ Cruiser; 2011-2014 Toyota Tundra; 2014 Freightliner Sprinter 2500 3983 Premium Oil Premium Oil Filters N 2013-2014 Buick Encore; 2009-2011 Chevrolet Aveo; 2009-2011 Chevrolet 1,115,245 Now Filters (Cartridge) Aveo5; 2011-2014 Chevrolet Cruze; 2012-2014 Chevrolet Sonic; 2013-2014 Chevrolet Trax; 2008-2009 Pontiac G3; 2009 Pontiac Wave; 2008-2009 Saturn Astra; 2009 Suzuki Swift 3984 Premium Oil Premium Oil Filters N 2007 Jeep Commander; 2007 Jeep Grand Cherokee; 2007 Mercedes-Benz 132,453 Now Filters (Cartridge) E320 CDI, GL320 CDI, ML320 CDI, R320 3985 Premium Oil Premium Oil Filters N 2006-2010 BMW M5; 2006-2011 BMW M6; 2012 Porsche 911 Black Edition; 92,315 Now Filters (Cartridge) 2009-2014 Porsche 911 Carrera; 2009-2013 Porsche 911 Carrera 4; 2009-2014 Porsche 911 Carrera 4S; 2011-2012 911 Porsche Carrera GTS; 2009-2014 Porsche 911 Carrera S; 2011-2012 Porsche 911 Speedster; 2009-2012 Porsche 911 Targa 4; 2009-2012 Porsche 911 Targa 4S; 2010-2014 Porsche 911 Turbo; 2010-2012 Porsche 911 Turbo Cabriolet Contact your Bosch representative for complete application information. 3986 Premium Oil Premium Oil Filters N 2009-2011 BMW 335D; 2009-2014 BMW X5 xDrive 335D 41,639 Now Filters (Cartridge) © 2015 Robert Bosch LLC, USA. All rights reserved. BOSCH is a trademark licensed by Robert Bosch GmbH and/or its affiliated entities. Page 2 of 4 | 15071349 | August 2015 Bosch Premium Oil Filters New Product Communication — August 5, 2015 Bosch Part Catalog Part Description Pop Application VIO Availability Number Code (US) 3976 Premium Oil Premium Oil Filters N 1982-1983 Audi 4000; 1979-1983 Audi 5000; 1997-2006 Audi A4; 503,804 Now Filters (Spin-On) 1999-2005 Audi A4 Avant; 2003-2006 Audi A4 Cabriolet; 1997-2005 Audi A4 Quattro; 1981 Nissan 810; 1980-1986 Nissan 720 Pickup; 1986-1989 Nissan D21 Pickup; 1981-1982 Nissan Maxima; 1987-1989 Nissan Pathfinder; 1979-1981 Volkswagen Dasher; 2003-2005 Volkswagen Eurovan; 1985-1998 Volkswagen Golf; Contact your Bosch representative for complete application information. 3978 Premium Oil Premium Oil Filters N 1997-1998 Aston Martin Db7; 2000-2009 Bentley Arnage; 2006 Bentley 477,972 Now Filters (Spin-On) Arnage Drophead; 1996-2008 Bentley Azure; 1993-2008 Bentley Brooklands; 1985-2002 Bentley Continental; 1982-1984 Bentley Corniche;
Load more

Recommended publications
  • Spark Plug Condition Chart
    Spark Plug Condition Chart Normal Mechanical Damage Oil Fouled May be caused by a foreign object that Too much oil is entering the combustion has accidentally entered the combus- Combustion deposits are slight chamber. This is often caused by piston tion chamber. When this condition is and not heavy enough to cause rings or cylinder walls that are badly discovered, check the other cylinders to any detrimental effect on engine worn. Oil may also be pulled into the prevent a recurrence, since it is possi- performance. Note the brown to chamber because of excessive clear- ble for a small object to "travel" from greyish tan color, and minimal ance in the valve stem guides. If the one cylinder to another where a large amount of electrode erosion which PCV valve is plugged or inoperative it degree of valve overlap exists. This clearly indicates the plug is in the can cause a build-up of crankcase pres- condition may also be due to improper correct heat range and has been sure which can force oil and oil vapors reach spark plugs that permit the piston operating in a "healthy" engine. past the rings and valve guides into the to touch or collide with the firing end. combustion chamber. Overheated Insulator Glazing Pre-Ignition A clean, white insulator firing tip and/or excessive electrode ero- Usually one or a combination of several sion indicates this spark plug con- Glazing appears as a yellowish, var- dition. This is often caused by over engine operating conditions are the nish-like color. This condition indicates prime causes of pre-ignition.
    [Show full text]
  • Service Manual
    SERVICE MANUAL GRASS TRIMMERS / BRUSH CUTTERS • TROUBLE SHOOTING • SERVICE / TORQUE LIMITS • TECHNICAL DATA 1028 4th Street S.W. • Building B • Auburn, WA 98001 • PH: 253-333-1200 • F: 253-333-1212 • tanakapowerequipment.com Introduction How To Use Your Service Manual Replacement Parts This Service Manual is arranged for quick, easy reference When replacement parts are required, use only approved and is divided into numbered sections. parts. Failure to do somayresult in products malfunction and possible injury to operator and/or bystander. NOTE: Read all information for servicing a part or system NOTE:All referenceto "Left","Right","Front" and "Back" before repair work is started to avoid needless are given from operators position. assembly. NOTE: The descriptions and specifications contained in this manual were in effect at the time this manual Preparation For Service was approved for printing. We reserve the right to Proper preparation is very important for efficient service discontinue models without notice and without work. A clean work area at the start of each job will allow incurring ob!igation. The equipment identified as you to perform the repair as easily and quickly as possible, either standard or optional and the various illustra- and reduce incidence of misplace tools and parts. A unit tions may not all be applicab!e to your unit. If you that is excessively dirty should be cleaned before work have question, always check with your dealer. starts. Cleaning will occasionally uncover trouble sources. Tools, instruments and parts needed for the job should be gathered before work is started. Interrupting a job to locate tools or parts is a needless delay.
    [Show full text]
  • Digital Twin and Triple Spark Ignition in Four- Stroke Internal Combustion Engines of Two- Wheelers
    International Journal of Innovations in Engineering and Technology (IJIET) Digital Twin and Triple Spark Ignition in Four- Stroke Internal Combustion Engines of Two- Wheelers G.V.N.B.Prabhkar Department Of Mechanical Engineering, V.K.R, V.N.B &A.G.K College of Engineering B.Kiran Babu Department Of Mechanical Engineering, V.K.R, V.N.B &A.G.K College of Engineering K.Durga Prasad Department Of Mechanical Engineering, V.K.R, V.N.B &A.G.K College of Engineering Abstract - Today it is a common trend. It has become a fashion for the people especially living in urban areas to ride such vehicles. Now the companies even want to launch such vehicles that attract the younger generation. This can be achieved by technology known as DTSi. Due to DTSi (digital twin spark ignition) system it is possible to combine strong performance and fuel efficiency. The improved engine efficiency modes have also resulted in lowered fuel consumption. The efficiency of these small engines were enhanced with increased power output just by increasing the number of fuel igniting element i.e. Spark Plug. Spark ignition is one of the most vital systems of an engine. Any variation in the spark timing and number of sparks per minute affects the engine performance severely. Thus a good design and control of the system parameters becomes most essential for optimum performance of an engine. Due to Digital Twin Spark Ignition system it is possible to combine strong performance and higher fuel efficiency. DTSi offers many advantages over conventional mechanical spark ignition system.
    [Show full text]
  • Electronic Ignition
    Electrical 6 6 For the Dealer Nearest You, Call: 800-729-3332 6.01 Electronic Ignition Crane Multi-Spark Ignition for Twin Cam 88® Models Crane ‘HI-4’ Ignition, Coil and Plug Wire Kit Electrical • Works with stock coil for outstanding performance on any bike Includes Crane HI-4 single fire ignition, single fire performance dual coil • Stock crankshaft position sensor is used to establish accurate base and reactive spiral core silicone spark plug wires. A complete modern timing. Initial timing can be set from -5° to +4°, rear cylinder timing can ignition kit for Big Twins from 1970 thru 1999 (except Twin Cam 88® be offset from -5° to +4°. Timing is easily adjusted via a rotary switch models), and Sportster® models 1971 thru 2003. 6 • For maximum horsepower, torque and reliability, contains ten advance 24548 Complete kit . .$425.89 curve families, selected via rotary switch. You can select the exact Note: Sportster® models from 1971 thru 1982 and Big Twins from 1970 thru 1983 require that advance curve you want for engines that are from factory-stock to mechanical advance units and point ignitions, or early electronic ignitions and rotors be wildly modified replaced by an OEM 32402-83 ignition timing rotor (CC #59725). • User programmable advance curves easily created on or off the bike • Requires HI-4 Powerlink Programming software to program this ignition (CC #640271 sold separately) • Full multi-spark performance; up to nine sparks at idle, three sparks up to 6,000 rpm • Easier starting, hot or cold, plus better low-speed driveability and off-idle response.
    [Show full text]
  • Small Gasoline Engine Repair, Troubleshooting and Tips
    http://waterheatertimer.org Small Gasoline troubleshooting Engine Repair and Tips Three step approach Determine why a small engine will not start or run properly. Welcome to Find N Choose, your free information site. Fuel - Spark - Compression A gasoline engine needs the following three essentials to "run" In time problems develop with fuel delivery, spark or compression, it only takes one of these to fail to prevent an engine from starting or to run. The first step is to determine which of these is at fault. Three Step Trouble Shooting Spark Place the engine out of bright sunlight, remove the spark plug, reconnect the ignition wire to the spark plug and lie it on the engine head, or metal of the engine, where it makes a path to ground of the engine. Give the rope a tug and observe whether there is a good spark jumping the spark plug electrode gap. A good blue spark is ideal, If there is no spark, try changing the spark plug, and try this test again. No spark indicates ignition problems. 1 of 15 7/25/2011 5:35 PM Small Gasoline Engine Repair, Troubleshooting and Tips http://www3.telus.net/findNchoose/smallenginerepair.html Note the colors and sound to the spark. A fat blue spark that cracks audibly indicates a very good spark. A white spindly sparks indicates a problem in the spark producing mechanism (check grounding of spark coil first) A reddish sparks usually indicate burnt points, or a failing condenser. A weak spark may not ignite the fuel-air under compression. If there is a spark, the problem lies either in fuel delivery, or in the compression of the engine.
    [Show full text]
  • Technical Information on Considerations When Choosing and Operating a Spark-Plug Sensor Solution
    TECHNICAL INFORMATION ON CONSIDERATIONS WHEN CHOOSING AND OPERATING A SPARK-PLUG SENSOR SOLUTION This paper describes characteristics that must be considered when choosing the correct instrumented spark plugs to substitute for the original standard spark-plugs of an engine in order to allow reliable pressure measurements via the spark-plug bore. Electrode gap The integration of a pressure measurement function requires space inside the spark-plug body. This results in a smaller ceramic insulator for the spark-plug function, and therefore a lower arc-over resistivity. To compensate for the lower arc-over resistivity, the ignition voltage must be low enough to avoid damage to the unit. To reduce the ignition voltage, the Electrode Gap needs to be chosen wisely. This will ensure safe and long lasting operation of the unit. On the other hand, to avoid misfire and therefore insure proper ignition of the air-fuel mixture, the arc of the Electrode Gap requires a minimum length. Choosing this gap will require a tradeoff between a minimum suffi- cient size gap and engine operating condition versus risking an internal arc-over. The maximum Electrode Gap (EG) is determined by the Final Compression Pressure (FCP) from the compression stroke, as this is a convenient metric that is roughly proportional to the demand voltage required to jump the gap in the spark plug. It is neces- sary to match the spark-plug specifications exactly to have reliable firing of the engine and to insure that the demand voltage is not exceeding component limits to avoid permanent damage of the spark-plug sensor assembly.
    [Show full text]
  • Internal Combustion Engines
    Lecture-16 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Introduction The combustion in a spark ignition engine is initiated by an electrical discharge across the electrodes of a spark plug, which usually occurs from 100 to 300 before TDC depending upon the chamber geometry and operating conditions. The ignition system provides a spark of sufficient intensity to ignite the air-fuel mixture at the predetermined position in the engine cycle under all speeds and load conditions. 2 Introduction – contd. In a four-stroke, four cylinder engine operating at 3000 rpm, individual cylinders require a spark at every second revolution, and this necessitates the frequency of firing to be (3000/2) x 4 = 6000 sparks per minute or 100 sparks per second. This shows that there is an extremely short interval of time between firing impulses. 3 Introduction – contd. The internal combustion engines are not capable of starting by themselves. Engines fitted in trucks, tractors and other industrial applications are usually cranked by a small starting engine or by compressed air. Automotive engines are usually cranked by a small electric motor, which is better known as a starter motor, or simply a starter. The starter motor for SI and CI engines operates on the same principle as a direct current electric motor. 4 Ignition System -Requirements It should provide a good spark between the electrodes of the plugs at the correct timing The duration
    [Show full text]
  • Recall Bulletin
    Bulletin No.: 07035D Date: September 2016 Recall Bulletin PRODUCT SAFETY RECALL SUBJECT: Engine Compartment Fire MODELS: 1997-2003 Buick Regal GS 1997-2003 Pontiac Grand Prix GTP Equipped with a 3.8L V6 Supercharged Engine (RPO L67 – VIN 1) This bulletin is being revised to enhance the Service Procedure with additional information to assure proper sealing of the replacement valve cover gasket, and to add the customer re-contact letter to the end of the bulletin. Please discard all copies of bulletin 07035C. It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer traded, or used for demonstration purposes until the repair contained in this bulletin has been performed on the vehicle. CONDITION General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 1997-03 model year Buick Regal GS and Pontiac Grand Prix GTP model vehicles, equipped with a 3.8L V6 Supercharged (RPO L67 – VIN 1) engine. Some of these vehicles have a condition in which drops of engine oil may be deposited on the exhaust manifold through hard braking. If this condition occurs, and if a hot surface ignition source were present, an engine compartment fire could occur. CORRECTION Dealers are to replace the engine’s front valve cover and front valve cover gasket with new parts of an improved design.
    [Show full text]
  • Investigation of Micro-Pilot Fuel Ignition System for Large Bore Natural Gas Engines
    2004 Gas Machinery Conference Albuquerque, NM INVESTIGATION OF MICRO-PILOT FUEL IGNITION SYSTEM FOR LARGE BORE NATURAL GAS ENGINES Scott A. Chase, Daniel B. Olsen, and Bryan D. Willson Colorado State University Engines and Energy Conversion Laboratory Mechanical Engineering Department Fort Collins, CO 80523 and oxides of nitrogen (NOx) below their original ABSTRACT design values. The cost of replacing these engines is This investigation assesses the feasibility of a highly prohibitive creating a need for retrofit retrofit diesel micro-pilot ignition system on a technologies to reduce emissions within the current Cooper-Bessemer GMV-4TF two-stroke cycle standards. natural gas engine with a 14” (36 cm) bore and a One of the current retrofit technologies 14” (36 cm) stroke. The pilot fuel injectors are being investigated is a pilot fuel ignition system. installed in a liquid cooled adapter mounted in a Pilot fuel ignition systems have been investigated spark plug hole. The engine is installed with a set of by a number of engine manufactures with a high dual-spark plug heads, with the other spark plug degree of success. Pilot fuel ignition systems used to start the engine. A high pressure, common- implemented on large bore reciprocating engines rail, diesel fuel delivery system is employed and employ natural gas as the primary fuel. Natural gas customizable power electronics control the current is either inducted into the cylinder through an intake signal to the pilot injectors. manifold or directly injected into the cylinder. In Three independent micropilot variables are order to initiate combustion, a small amount of pilot optimized using a Design of Experiments statistical fuel is injected into the cylinder self igniting at technique to minimize a testing variable consisting compression temperatures.
    [Show full text]
  • Assembly Instructions for GUZZI Induktive on Dynamo
    Assembly Instructions for GUZZI Induktive on dynamo E_MG_PB_5F_08 7. Version (c)Sep.2005 Parts List: Ignition box Pickup with 2 screws Rotor with 6 washers Cable binder Ignition coil Ignition cable The Power Block ignition system is far superior to conventional ignitions that usually achieve double the ignition tension, double the ignition energy, as well as double the spark duration. The adjustment of the ignition timing is worked out by a digital High Speed Microprocessor, with 16bit resoloution (65536 points) for each single revolution. The Signal conditioning as well as the ignition amps control are also carried out digitally, to achieve maximum efficiency with a minimum loss. The necessary D-Well time of the ignition coils is worked out digitally to achieve maximum energy saving. The output requirements of the ignition system (module + ignition coil) is approximately 17W with 1000 RPM and approximately 67W with 5000 RPM. The full performance of our Power Block ignitions is only possible with SILENT HEKTIK ignition coils, because the ignition curves for the relevant ignition energy as well as tensions are tuned and the D-Well timing on the technical details of the coils are cut. With unsuitable or inadequate ignition coils, not only does the gaurantee expire , there will also be bad trottle responce; bad coldstart or perhaps missfire: SAFETY PRECAUTIONS AND NOTICES Caution High Tension! Danger ! Mortal danger ! To avoid injury or destruction of the electronic, attention should be paid to the following when working on vehichles with full electronic digital high energy ignition systems: - Read the assembly instructions carefully and completely and follow the instructions.
    [Show full text]
  • All About Ignition Coils | BERU
    Ignition Technology Diesel Cold-Start Technology Sensors All about ignition coils Technical Information Beruparts.eu BERU® is a registered trademark of BorgWarner TABLE OF CONTENTS TABLE OF CONTENTS TRUSTED TECHNOLOGY TRUSTED TECHNOLOGY 3 OVER 400 IGNITION COILS TYPES FOR MORE THAN 12.500 THE SPARK-IGNITION ENGINE 5 DIFFERENT VEHICLE TYPES Operation of ignition coils in the spark-ignition engine 5 Requirements placed on a modern ignition coils 6 BERU Ignition Coils are developed, tested and built in Western Europe, Asia and Mexico by BorgWarner IGNITION COILS DESIGN to the OE specifications and quality standards. BERU offers a large range of Ignition Technologies for petrol AND MODE OF OPERATION 7 engines. Ignition technology terminology 7 Spark energy 9 BorgWarner supplies OEM's with ignition coils for How many ignition sparks does an engine need? 9 nearly all significant European volume applications. The company currently offers a range of over IGNITION COILS TYPES 400 ignition coils to the maintenance and repair markets – needless to say in original equipment AND SYSTEMS 10 quality. Today the market penetration of the range Canister-type ignition coils 10 in VW vehicles is 99%, in BMW Group vehicles Electronic distributor ignition coils 11 96%, in the VW Group as a whole 95% – and Double spark ignition coils 12 today the range is being continuously extended in Ignition coil rails 13 accordance with market requirements. BERU QUALITY Plug top- / pencil- / Smart- coils 13 • Products are designed by IGNITION COIL – PRODUCTION 16 BorgWarner
    [Show full text]
  • SERVICE INSTRUCTION SK-SI006 Rev NC Page 1 of 7
    SERVICE INSTRUCTION SK-SI006 Rev NC Page 1 of 7 EFFECTIVE DATE: This Service Instruction is effective August 23, 2021 SUBJECT: IGNITION COIL BRACKET REPLACEMENT MODELS AFFECTED: CCK-2000 AND CCX-2000 S/N 0001 THRU 0114 COMPLIANCE TIME: This bracket replacement is optional and is left to the sole discretion of the owner / operator / builder of the Experimental Amateur-Built aircraft, unless replacement is called for as part of other service document(s). The shape and mounting pattern of the ignition coils on CC363i engines was revised due to Lightspeed Engineering supplier changes following the S/N range above. Should it be necessary, this document is provided to guide retrofit installation of the revised mounting bracket which is compatible with either style ignition coil. PURPOSE: To replace the original ignition coil bracket with a revised bracket that is compatible with both original and newer style ignition coils. WARRANTY: This change is optional, and is not considered a warranty item. PARTS LIST : PART DESCRIPTION QTY QTY (original coils) (new coils) SK50369-001 Weldment, Intake Hanger 1 1 SK51368-003 Bushing 8 - SK51368-001 Bushing - 8 AN960-416 Washer - 8 AN960-10 Washer 8 - AN936-A416 Lock Washer 4 4 AN380-2-2 Cotter Pin 1 1 AN363-1032 Nut 4 - AN363-428 Nut - 4 AN4-30A Bolt - 4 AN3-24A Bolt 4 - SP55020-117 Straight Spade Connectors - 1 (pack of 8) INSTRUCTIONS: Form #: EN-555 Rev B, 01-23-2015 Cub Crafters, Inc. | 1918 South 16th Avenue | Yakima, Washington 98903 | p 509.248.9491 | cubcrafters.com SERVICE INSTRUCTION SK-SI006 Rev NC Page 2 of 7 1.
    [Show full text]