OBJ_BUCH-1695-004.book Page 1 Friday, September 2, 2016 3:45 PM

Robert Bosch Power GmbH 70538 Stuttgart GERMANY

www.bosch-pt.com Uneo

1 609 92A 351 (2016.09) PS / 203

de Originalbetriebsanleitung tr Orijinal işletme talimatı mk Оригинално упатство за работа en Original instructions pl Instrukcja oryginalna sr Originalno uputstvo za rad fr Notice originale cs Původní návod k používání sl Izvirna navodila es Manual original sk Pôvodný návod na použitie hr Originalne upute za rad pt Manual original hu Eredeti használati utasítás et Algupärane kasutusjuhend it Istruzioni originali ru Оригинальное руководство по lv Instrukcijas oriģinālvalodā nl Oorspronkelijke эксплуатации lt Originali instrukcija gebruiksaanwijzing uk Оригінальна інструкція з ar ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ da Original brugsanvisning експлуатації sv Bruksanvisning i original kk Пайдалану нұсқаулығының no Original driftsinstruks түпнұсқасы fi Alkuperäiset ohjeet ro Instrucţiuni originale el Πρωτότυπο οδηγιών χρήσης bg Оригинална инструкция OBJ_BUCH-1695-004.book Page 9 Friday, September 2, 2016 3:45 PM

English | 9 Transport English Die enthaltenen Li-Ionen-Akkus unterliegen den Anforderun- gen des Gefahrgutrechts. Die Akkus können durch den Benut- zer ohne weitere Auflagen auf der Straße transportiert wer- General Power Safety Warnings den. WARNING Read all safety warnings and all instruc- Beim Versand durch Dritte (z.B.: Lufttransport oder Spediti- tions. Failure to follow the warnings and on) sind besondere Anforderungen an Verpackung und Kenn- instructions may result in electric shock, fire and/or serious zeichnung zu beachten. Hier muss bei der Vorbereitung des injury. Versandstückes ein Gefahrgut-Experte hinzugezogen wer- Save all warnings and instructions for future reference. den. The term “power tool” in the warnings refers to your mains- Versenden Sie Akkus nur, wenn das Gehäuse unbeschädigt operated (corded) power tool or battery-operated (cordless) ist. Kleben Sie offene Kontakte ab und verpacken Sie den Ak- power tool. ku so, dass er sich nicht in der Verpackung bewegt. Bitte beachten Sie auch eventuelle weiterführende nationale Work area safety Vorschriften.  Keep work area clean and well lit. Cluttered or dark areas invite accidents. Entsorgung  Do not operate power tools in explosive atmospheres, Elektrowerkzeuge, Akkus, Zubehör und Verpackun- such as in the presence of flammable liquids, gases or gen sollen einer umweltgerechten Wiederverwertung dust. Power tools create sparks which may ignite the dust zugeführt werden. or fumes. Werfen Sie Elektrowerkzeuge und Akkus/Batterien nicht in  Keep children and bystanders away while operating a den Hausmüll! power tool. Distractions can cause you to lose control. Nur für EU-Länder: Electrical safety Gemäß der europäischen Richtlinie  Power tool plugs must match the outlet. Never modify 2012/19/EU müssen nicht mehr ge- the plug in any way. Do not use any adapter plugs with brauchsfähige Elektrowerkzeuge und ge- earthed (grounded) power tools. Unmodified plugs and mäß der europäischen Richtlinie matching outlets will reduce risk of electric shock. 2006/66/EG müssen defekte oder ver-  brauchte Akkus/Batterien getrennt gesam- Avoid body contact with earthed or grounded surfaces, melt und einer umweltgerechten Wiederverwendung zuge- such as pipes, radiators, ranges and refrigerators. führt werden. There is an increased risk of electric shock if your body is earthed or grounded. Nicht mehr gebrauchsfähige Akkus/Batterien können direkt  abgegeben werden bei: Do not expose power tools to rain or wet conditions. Deutschland Water entering a power tool will increase the risk of electric Recyclingzentrum Elektrowerkzeuge shock. Osteroder Landstraße 3  Do not abuse the cord. Never use the cord for carrying, 37589 Kalefeld pulling or unplugging the power tool. Keep cord away Schweiz from heat, oil, sharp edges and moving parts. Damaged Batrec AG or entangled cords increase the risk of electric shock. 3752 Wimmis BE  When operating a power tool outdoors, use an exten- Akkus/Batterien: sion cord suitable for outdoor use. Use of a cord suitable Li-Ion: for outdoor use reduces the risk of electric shock. Bitte beachten Sie die Hinweise im Ab-  If operating a power tool in a damp location is unavoid- schnitt „Transport“, Seite 9. able, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Personal safety Änderungen vorbehalten.  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while op- erating power tools may result in serious personal injury.  Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Bosch Power Tools 1 609 92A 351 | (2.9.16) OBJ_BUCH-1695-004.book Page 10 Friday, September 2, 2016 3:45 PM

10 | English

 Prevent unintentional starting. Ensure the switch is in  Use power tools only with specifically designated bat- the off-position before connecting to power source tery packs. Use of any other battery packs may create a and/or battery pack, picking up or carrying the tool. risk of injury and fire. Carrying power tools with your finger on the switch or en-  When battery pack is not in use, keep it away from oth- ergising power tools that have the switch on invites acci- er metal objects, like paper clips, coins, keys, nails, dents. screws or other small metal objects, that can make a  Remove any adjusting key or wrench before turning connection from one terminal to another. Shorting the the power tool on. A wrench or a key left attached to a ro- battery terminals together may cause burns or a fire. tating part of the power tool may result in personal injury.  Under abusive conditions, liquid may be ejected from  Do not overreach. Keep proper footing and balance at the battery; avoid contact. If contact accidentally oc- all times. This enables better control of the power tool in curs, flush with water. If liquid contacts eyes, addition- unexpected situations. ally seek medical help. Liquid ejected from the battery  Dress properly. Do not wear loose clothing or jewel- may cause irritation or burns. lery. Keep your hair, clothing and gloves away from Service moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.  Have your power tool serviced by a qualified repair per-  If devices are provided for the connection of dust ex- son using only identical replacement parts. This will en- traction and collection facilities, ensure these are con- sure that the safety of the power tool is maintained. nected and properly used. Use of dust collection can re- duce dust-related hazards. Hammer Safety Warnings Power tool use and care  Wear ear protectors. Exposure to noise can cause hear- ing loss.  Do not force the power tool. Use the correct power tool  for your application. The correct power tool will do the Use auxiliary handle(s), if supplied with the tool. Loss job better and safer at the rate for which it was designed. of control can cause personal injury.   Do not use the power tool if the switch does not turn it Hold power tool by insulated gripping surfaces when on and off. Any power tool that cannot be controlled with performing an operation where the cutting accessory the switch is dangerous and must be repaired. or fastener may contact hidden wiring. Cutting accesso- ry and fasteners contacting a “live” wire may make ex-  Disconnect the plug from the power source and/or the posed metal parts of the power tool “live” and could give battery pack from the power tool before making any the operator an electric shock. adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Additional Safety and Working In-  Store idle power tools out of the reach of children and structions do not allow persons unfamiliar with the power tool or  these instructions to operate the power tool. Power When transporting and storing, set the rotational di- tools are dangerous in the hands of untrained users. rection switch to the centre position. Danger of injury when accidentally actuating the On/Off switch.  Maintain power tools. Check for misalignment or bind-  ing of moving parts, breakage of parts and any other Use appropriate detectors to determine if utility lines condition that may affect the power tool’s operation. If are hidden in the work area or call the local utility com- damaged, have the power tool repaired before use. pany for assistance. Contact with electric lines can lead Many accidents are caused by poorly maintained power to fire and electric shock. Damaging a gas line can lead to tools. explosion. Penetrating a water line causes property dam- age.  Keep cutting tools sharp and clean. Properly maintained  cutting tools with sharp cutting edges are less likely to bind Before switching on the power tool, make sure that the and are easier to control. application tool moves freely. When switching on with a blocked drilling tool, high torque reaction can occur.  Use the power tool, accessories and tool bits etc. in ac-  cordance with these instructions, taking into account When working with the machine, always hold it firmly the working conditions and the work to be performed. with both hands and provide for a secure stance. The Use of the power tool for operations different from those power tool is guided more secure with both hands. intended could result in a hazardous situation.  Secure the workpiece. A workpiece clamped with clamp- ing devices or in a vice is held more secure than by hand. Battery tool use and care  For drilling without impact in wood, metal, ceramic and  Recharge only with the charger specified by the manu- , a suitable SDS-Quick tool or an application tool facturer. A charger that is suitable for one type of battery with hexagon shank can be used. pack may create a risk of fire when used with another bat-  Inserting SDS-Quick Drilling Tools: Check the latching by tery pack. pulling the tool.

1 609 92A 351 | (2.9.16) Bosch Power Tools OBJ_BUCH-1695-004.book Page 11 Friday, September 2, 2016 3:45 PM

English | 11

 The maximum torque is reached only in the screwdriving  The battery supplied is partially charged. To ensure full operating mode (1. gear). The maximum no-load speed is capacity of the battery, completely charge the battery reached only in the operating modes drilling and hammer in the battery charger before using your power tool for drilling. the first time.  Replace a damaged dust protection cap immediately.  Read the operating instructions of the battery charger. The dust protection cap largely prevents the penetration of  Check the tight seating of the battery. Two locking lev- drilling dust into the tool holder during operation. When in- els are possible. serting the tool, pay attention that the dust protection cap The battery charge-control indicator indicates the charge is not damaged. condition of the battery for a few seconds when the On/Off  Dust from materials such as lead-containing coatings, switch is pressed half or fully through. It consists of a three- some wood types, minerals and metal can be harmful to colour illuminating LED. one’s health and cause allergic reactions, lead to res- piratory infections and/or cancer. Materials containing LED Capacity asbestos may only be worked by specialists. Continuous lighting, green ≥ 66 % – As far as possible, use a dust extraction system suitable Continuous lighting, orange > 33 % —66 % for the material. Continuous lighting, red > 11 % —33 % – Provide for good ventilation of the working place. – It is recommended to wear a P2 filter-class respirator. Flashing light, red ≤ 11 % Observe the relevant regulations in your country for the materials to be worked. Symbols  Prevent dust accumulation at the workplace. Dust can The following symbols are important for reading and under- easily ignite. standing the operating instructions. Please take note of the  If the application tool should become blocked, switch symbols and their meaning. The correct interpretation of the the machine off. Loosen the application tool. symbols will help you to use the machine in a better and safer manner.  When switching on with a blocked drilling tool, high torque reaction can occur. Symbol Meaning  Apply the power tool to the screw only when it is Uneo: Cordless switched off. Rotating tool inserts can slip off. Grey-marked area: Handle  Always wait until the machine has come to a complete (insulated gripping surface) stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.  To save energy, only switch the power tool on when using Article number it.  Avoid unintentional switching on. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power Read all safety warnings and all instruc- tools that have the switch on invites accidents. tions  Do not open the battery. Danger of short-circuiting. Protect the battery against heat, e. g., against Before any work on the machine itself, continuous intense sunlight, fire, water, and remove the battery from the power moisture. Danger of explosion. tool.

Wear protective gloves  In case of damage and improper use of the battery, va- pours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irri- Always wear ear protection. tate the respiratory system.  Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery Wear safety glasses/goggles against dangerous overload.  The battery can be damaged by pointed objects such as nails or or by force applied externally. An internal short circuit can occur and the battery can burn, Keyless smoke, explode or overheat.

Bosch Power Tools 1 609 92A 351 | (2.9.16) OBJ_BUCH-1695-004.book Page 12 Friday, September 2, 2016 3:45 PM

12 | English

Symbol Meaning Symbol Meaning Movement direction Ø Max. screw dia. Weight according to EPTA-Procedure 01:2014 Reaction direction LwA Sound power level

LpA Sound pressure level

Next step of action ah Vibration total value K Uncertainty T Permitted ambient temperature during Prohibited action 1 charging

T2 Permitted ambient temperature during Screwdriving operation * and storage * limited performance at temperatures <0 °C Drilling without impact Recommended batteries

Hammer Drilling Recommended chargers

Switching On

Switching Off Delivery Scope Cordless Rotary Hammer. Low speed/impact rate Application tools and other accessories shown or described are not part of the standard delivery scope. A complete overview of accessories can be found in our ac- High speed/impact rate cessories program.

Right/left rotation Intended Use The power tool is intended for hammer drilling in concrete, brick and stone. It is also suitable for drilling without impact in Battery Charge Indicator wood and metal, as well as for screwdriving. The light of this power tool is intended to illuminate the power tool’s direct area of working operation and is not suitable for Tool holder household room illumination. Technical Data Apply a light coat of grease to the shank end of the application tool The technical data of the machine are listed in the table on page 191. U Rated voltage E Impact energy per stroke according to Noise/Vibration Information EPTA-Procedure 05/2009 The measured values of the machine are listed in the table on page 191. n0 No-load speed M Maximum torque according to Sound emission values determined according to ISO 5393 EN 60745-2-6. Wood Vibration total values a h (triax vector sum) and uncertainty K determined according to EN 60745-2-6. Steel The vibration level given in this information sheet has been Concrete measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with anoth- Brickwork er. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main ap- Ø Drilling diameter, max.

1 609 92A 351 | (2.9.16) Bosch Power Tools OBJ_BUCH-1695-004.book Page 13 Friday, September 2, 2016 3:45 PM

English | 13 plications of the tool. However if the tool is used for different when it is running but not actually doing the job. This may sig- applications, with different accessories or insertion tools or is nificantly reduce the exposure level over the total working poorly maintained, the vibration emission may differ. This period. may significantly increase the exposure level over the total Identify additional safety measures to protect the operator working period. from the effects of vibration such as: maintain the tool and the An estimation of the level of exposure to vibration should also accessories, keep the hands warm, organisation of work pat- take into account the times when the tool is switched off or terns. Mounting and Operation The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the safety instructions. Action Figure Please observe Page Removing the battery 1 192

Inserting the battery 2 192

Checking the battery charge 3 192 condition

Selecting the Application 4 193 Tool/Accessory

Inserting SDS-Quick Drilling Tools 5 193

Inserting application tools with 6 194 hexagon shank

Removing SDS-Quick Drilling Tools 7 194

Bosch Power Tools 1 609 92A 351 | (2.9.16) OBJ_BUCH-1695-004.book Page 14 Friday, September 2, 2016 3:45 PM

14 | English

Action Figure Please observe Page Removing application tools with 8 194 hexagon shank

Inserting the Keyless Chuck 9 195

Inserting round shank applications 10 195 tools

Selecting the operating mode and 11 195 rotation direction

Switching on and off and setting the 12 196 speed

Selecting Accessories 197–199

Maintenance and Cleaning Great Britain  Robert Bosch Ltd. (B.S.C.) For safe and proper working, always keep the machine P.O. Box 98 and ventilation slots clean. Broadwater Park Clean the application tool, the tool holder, the power tool’s North Orbital Road ventilations slots, and the battery’s ventilation slots each time Denham after using. Uxbridge UB 9 5HJ After-sales Service and Application At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Service Tel. Service: (0344) 7360109 Our after-sales service responds to your questions concern- E-Mail: [email protected] ing maintenance and repair of your product as well as spare Ireland parts. Exploded views and information on spare parts can al- Origo Ltd. so be found under: Unit 23 Magna Drive www.bosch-pt.com Magna Business Park Bosch’s application service team will gladly answer questions City West concerning our products and their accessories. Dublin 24 In all correspondence and spare parts orders, please always Tel. Service: (01) 4666700 include the 10-digit article number given on the nameplate of Fax: (01) 4666888 the product.

1 609 92A 351 | (2.9.16) Bosch Power Tools