DOCSLIB.ORG

Office/Tech: 641-623-5401

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

POWER CUSTOM RUGER® 10/22® POWER CUSTOM RUGER® 10/22® RIFLE INDEX COMPETITION TRIGGER PARTS PRE-TRAVEL ADJUSTABLE 10/22 Performance Parts ........ 154-157 Hammers/Sears .................. 167 Drop In Parts For Reduced Trigger Pull; Provide Smoother HAMMER & SEAR KIT AK-47 Parts ................... 157-158 Magazine Releases ............. 176-177 Function & Improved Accuracy Eliminates Pre-Travel For A “Power Custom” has become a much-respected name among Barrels - Centerfire ............ 168-171 Magazines & Parts ............ 177-182 folks who love to accurize the dependable, affordable 10/22. Power Clean, Crisp Trigger Pull Custom offers high-quality, drop-in, EDM machined parts that pro- Barrels - Rimfire ............... 171-173 Receivers ..................... 158-160 vide improved performance at a fraction of the cost of expensive Easy-to-install kit re- RIFLE hand fitting. ab places factory parts to elimi- Bolt Components .............. 160-162 Recoil Lugs ...................... 168 nate trigger pre-travel and roughness for a clean, crisp, Bottom Metal & Screws ........ 182-185 Safeties ......................... 163 PRETRAVEL ADJUSTABLE COMPETITION TRIGGER KIT - Drop- custom pull with little or no in, EDM machined parts kit includes a gunsmithing. Adjust the set- Brakes/Comps/Flash Hiders ...... 173-176 Springs/Recoil Buffers .......... 185-186 pre-travel adjustable sear so you can screw in the sear with the achieve a custom trigger pull that per- included Allen wrench to Extractors .................... 163-164 Stocks & Chassis .............. 186-197 forms exactly to you liking. Matched take up pre-travel, then lock hammer further helps reduce trigger screw in place with your favorite thread locking adhesive. Sear and Firing Pins ................... 162-163 Triggers .................... 164-167 take-up to ensure a crisp trigger pull for hammer geometry is custom designed to produce a lighter pull and improved accuracy. Includes everything a smoother trigger return. EDM machined from A2 tool steel and Gas System Parts ............. 167-168 needed to produce a light, crisp trigger heat treated to Rc 56-58, with precision-ground engagement sur- for the 10/22: overtravel adjustable Tita- faces vapor honed for smoothness. Some guns may require minor nium trigger, two hammer and two trig- fitting for correct engagement of safety, described in the detailed ® ® ger shims, extra power hammer spring, FORCE RUGER 10/22 ® ® instructions. Hammer/sear sets are produced as matched pairs with extra power disconnector spring, extra 3 RUGER 10/22 BX-TRIGGER 2 /4 lb. pull weight plus or minus 4 oz. Shims are precision manufac- TRIGGER SYSTEM power trigger return spring, sear assem- tured from .004" thick 302 stainless steel and tempered for superior Gives A Big Improvement In bly pin, and trigger pivot pin. Drop-In Match-Grade Trigger With wear resistance. Use them to center trigger and sear for additional Trigger Pull Weight SPECS: Titanium trigger, matte black finish. Other parts, steel, matte blue smoothness and consistency of pull and cleaner break by minimiz- Pre-/Over-Travel Adjustment & finish. Heat treated to Rc 56-58. Includes assembly pin and instructions. ing friction between the sear and the inside of the trigger. Kits DO Extended Magazine Release Drop-in replacement trigger mod- ule provides a light, crisp trigger pull #713-000-079AU 10/22 Pre-Travel Adjustable Trigger NOT fit 10/22 Magnum. Sear Kit is compatible with factory original Self-contained, drop-in replacement between 2½ and 3 lbs., with minimal Kit, 3A115N99 � � � � � � � � � � � � � � � � � � � � $ 138.99 and aftermarket hammers with the correct engagement angle for for factory trigger module has a fully machined billet aluminum overtravel and positive reset. A genuine drop-in installation; minor fitting may be required on some guns. ab housing that keeps the hardened tool steel internal components Ruger factory part compatible with all COMPETITION TRIGGER KIT - SPECS: Steel, in-the-white. Sear Kit – Includes sear, disconnector/sear in precise alignment. Ensures a smooth, clean, match-grade, 3 lb. 10/22 rifles and 22 Charger pistols. Comes in a polymer block that Everything you need to produce spring, 2 sear shims, trigger pivot pin, cheater pin. Hammer & Sear Kit – trigger pull for superb shot-to-shot consistency, smaller groups, holds the hammer and all the pins in place, allowing the operator to a light, crisp trigger for the 10/22. Includes Sear Kit contents plus extra-power hammer spring, 2 hammer and higher scores. Features a wide, serrated, semi-flat trigger shoe, dry fire the trigger assembly before installation. Meets or exceeds EDM matched hammer and sear, shims, replacement trigger return spring. Complete installation instruc- adjustable for over-travel. Redesigned radius on the rear of the trig- industry standards for drop testing. A quick, simple repair or upgrade overtravel adjustable titanium trig- tions included. Kits DO NOT fit 10/22 Magnum. ger and a realigned trigger plunger hole help minimize friction for an for your rifle. ab ger, two hammer and two trigger #713-000-071AU Pre-Travel Adj. 10/22 Hammer & Sear 10/22 PERFORMANCE PARTS ultra-smooth pull. Disconnector has sear adjustment setscrew that SPECS: Polymer construction, black. 2.5 - 3.0 lb. trigger pull. Fits Ruger shims, extra power hammer spring, Kit, 3A76I99 � � � � � � � � � � � � � � � � � � � � � � � $ 88.99 lets you eliminate creep and improve trigger feel. Unique magazine 10/22 or 22 Charger pistol. extra power disconnector spring #713-000-070AU Pre-Travel Adj. 10/22 Sear Kit, release extends under the triggerguard to position the contact sur- #780-001-368AU 10/22 BX-Trigger , 8G71G99 � � � � � � � � $ 74.99 and extra power trigger return 3A34C99 � � � � � � � � � � � � � � � � � � � � � � � � � � 37.99 face in easy reach and provide extra leverage for fast, easy magazine spring. Recoil buffer included. changes. Comes with the housing, extended magazine release le- SPECS: Titanium trigger, silver matte finish. Other parts, steel, matte blue ver, fixed ejector, and trigger/and assembly installed. ab finish. Heat treated to Rc 56-58. Includes assembly pin and instructions. SPECS: Housing/Trigger/Mag Release Lever - 6061 T6 aluminum, hard- ® ® #713-123-000AU 10/22 Trigger Kit, 3A103H99 � � � � � � � �$ 131.99 coat anodized, matte black. Hammer/Sear/Disconnector - A2 tool steel RUGER 10/22 heat-treated to Rc 52-54. BX TRIGGER “PLUS” UPGRADE KITS ALUMINUM TRIGGER - Machined aluminum trig- #791-000-092AU Complete 10/22 Trigger System, ger has a wide, smooth face and sits lower than the COMPETITION SEAR - Produces a lighter 3C219F99 � � � � � � � � � � � � � � � � � � � � � � � � $ 298.99 factory trigger to give you better control with less pull with a smoother trigger return. Preci- pressure needed for release. Includes over-travel sion ground with hand stoned engagement TRIGGER SHOE - Trigger shoe from the Force Trig- BX Plus 10-Rd Mag + Hunter X-22 Stock adjustment screw (hex wrench included) and a surfaces. Includes extra power sear spring, ger System is also available separately for installation 10 pre-drilled hole that allows easy access to adjust two .004" trigger shims. on any /22. Precision machined from billet aluminum, the sear pre-travel. SPECS: Steel, matte blue finish. Includes assem- with a deeply serrated face and overtravel adjustment SPECS: Aluminum, anodized, black, matte finish. In- bly pin and instructions. Also fits 10/22 Magnum. screw. Redesigned geometry provides a camming ac- A Better Trigger Pull - And More - cludes hex wrench, sear assembly “cheater” pin, and instructions. #713-123-002AS 10/22 Competition Sear, 3A22B93 � � � $ 25.00 tion on the trigger plunger that minimizes friction and For A Better Shooting Experience binding for a super-smooth pull. ab #713-000-091AU 10/22 Trigger, 3A22A99 � � � � � � � � � � � � $ 28.99 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish. .35" Convenient kits all contain the Ruger® BX upgraded trigger plus COMPETITION DISCONNECTOR - De- wide face. popular accessories that help you enhance your 10/22® for better COMPETITION HAMMER - Gives a lighter signed to help you get the most from the #791-000-089AU Trigger Shoe, 3C31B99 � � � � � � � � � � � � � $ 32.99 performance and more shooting satisfaction. Kits include various pull with faster lock time. Precision ground Power Custom Competition Hammer and components: spare Ruger® factory magazine, the popular Magpul with vapor honed and hand stoned en- Sear to produce a crisp, clean, match-grade Hunter X-22 ergonomically-enhance, molded hard polymer stock, gagement surfaces. Includes extra power trigger pull. Wire-EDM machined from tool or a high-end E.R. Shaw target barrel. (Exact kit contents listed be- hammer spring, two, .004" shims and trig- steel to exacting tolerances for easy, drop- ® ® low.) ab ger return spring. in fit, with precision-ground, hardened contact surfaces to ensure CLARK CUSTOM RUGER 10/22 reliable function. Gunsmith installation recommended. STOCK # BX TRIGGER PLUS... PRICE SPECS: Carbon steel, matte blue finish. Heat treated to Rc 56-58. Instructions included. SPECS: Tool steel, natural finish. DELUXE HAMMER/ ® ® #080-001-295AU Ruger BX-25 25-Rd Magazine 9Z107K99 $ 107.99 DOES NOT fit 10/22 Magnum. #713-000-089AS 10/22 Competition Disc., 3A18F56 � � � $ 19.99 TRIGGER KIT #080-001-296AU Ruger® 10-Rd Magazine 9Z101K99 $ 101.99 #713-123-001AU 10/22 Competition Hammer, #080-001-297AU Ruger® 10-Rd Mag + Magpul 9Z234B99 $ 234.99 3A37M99 � � � �
Recommended publications
  • Removal of Stock Parts (Impingement System)

    Removal of Stock Parts (Impingement System)

    Removal of Stock Parts (Impingement System): 1. Remove the upper receiver from the lower receiver. 2. Remove the bolt carrier and charging handle from the receiver. 3. Remove the bolt from the carrier. 4. Remove the gas rings from the bolt using a thin flat edge. Set the bolt and bolt carrier aside for later installation steps. 5. Remove the top and bottom handguards from the barrel by pulling back on the delta ring and pulling the handguards apart. If you don’t have standard handguards, remove any handguard(s) that might be on the rifle. 6. Use a 3/4” wrench to remove the flash suppresser or muzzle break along with the crush washer from the barrel. 7. Use a 1/8” hardened punch and a hammer to drive out the front sight pins that hold the sight assembly in place. Some rifles will have tapered pins. Check both sides of the pins to determine if one side is larger than the other and drive out from the side that is the smallest. Once both pins are removed, remove the sight assembly/gas block and gas tube from the barrel by slightly twisting the assembly from side to side as you pull it forward off the barrel. You can use a soft mallet (e.g. rubber, plastic, or brass) to tap the assembly off, if needed. 8. Remove the stock front handguard cap from the barrel Installation of Adams Arms Retrofit Piston System Components 1. Installation of Receiver Bushing: Install the flash suppressor onto the barrel by hand tightening it to protect the barrel threads during this step.
  • Helios Qd Kit Suppressor Manual (C)

    Helios Qd Kit Suppressor Manual (C)

    HELIOS QD KIT SUPPRESSOR MANUAL (C) Before using this product, please take a moment to read and understand this manual. If you have any questions, please feel free to call us at any time! PRODUCT FEATURES • Variable Function, the only silencer in the world capable of being a standard function type silencer or a flow bypass type silencer simply by changing the front cap. • DMLS (Direct Metal Laser Sintered – 3D Printed) Construction. • Modularity at both ends and the best sound reduction available for its size makes it the most versatile and capable silencer available. • Shallow taper joints are used at each threaded junction to maintain concentricity and provide superior retention. • Comes with many feature-rich accessories with additional parts available for separate purchase depending on user needs. • Proprietary coating prevents copper/carbon/lead/etc build up within the silencer, but the silencer can still be serviced if and when necessary. PRODUCT SPECIFICATIONS • Caliber – 5.56mm, 7.62mm Capable • Length – 7.2” in Default Direct Thread Config • Diameter – 1.5” at Rear, 1.75” at Front • Weight – 20.7oz in Default Direct Thread Config MATERIAL SPECIFICATIONS • Helios Core – 718 Inconel • Default Accessories – 17-4 Stainless Steel • Finishes – S-Line (Boron Nitride), PVD, Black Nitride 206 FLETCHER RD ᛫ ARTESIA, NM 88210 CGS SUPPRESSORS LLC, A DIVISION OF CGS GROUP LLC HELIOS QD KIT (COM) SUPPRESSOR PARTS DIAGRAM 206 FLETCHER RD ᛫ ARTESIA, NM 88210 CGS SUPPRESSORS LLC, A DIVISION OF CGS GROUP LLC GENERAL OVERVIEW The suppression system used in the Helios QD is based on a shorter variant of CGS Hyperion Technology.
  • Rings & Bases 249-269

    Rings & Bases 249-269

    ALLCHIN S&W REVOLVER MINI STS HIGH STANDARD TARGET PISTOLS RINGS & BASES INDEX SCOPE MOUNT UNIVERSAL SCOPE MOUNT Fitting & Custom Components ...268-269 Rifle ..........................251-268 Mount A Mini Red Dot On Any Factory Part Ensures A RINGS & BASES Handgun ...................... 249-250 Shotgun ........................250-251 Pre-Drilled S&W Revolver Perfect Fit Easy-to-install mount lets you Lightweight alumi- upgrade any pre-drilled S&W revolver num mount with multiple WEIGAND COMBAT with a small red dot sight. Machined cross-slots for Weaver-style rings allows proper scope eye relief. aluminum construction offers durability Weighs only 2 oz., won’t affect balance. TORX screws resist strip- ® recoil pins to prevent “scope flyoff," and and weight savings. Mount body align- ping. Requires no gunsmithing. ab HANDGUN SCOPEMOUNTS 1 accepts Weaver-style rings or mount ment holes accept C-More STS, Burris SPECS: Aluminum, Hard Anodized Finish. 6" (15.2cm) x /2" (12.7mm). Wt TAURUS TRACKER SCOPE MOUNT systems such as used on Tasco 40mm Fastfire, JPoint, Optima 2000, Leupold Delta Point, Sig and most = 2 oz, Black. Fits: Olympic OM, M Grip, .22 Short; Supermatic Citation - Precision-machined, aluminum red dot optics. Super Redhawk .44 other small red dot sights. Positions red dot over the rear sight and SC-M, M Grip, .22; Supermatic Tournament SK-M, M Grip, .22; Supermatic scope mount accepts Weaver-style Mag fits only the .44 Magnum and can as close to the bore as possible for fast target acquisition. ab Trophy STR-M, M Grip, .22; Victor VCT-M, M Grip, .22 rings to let you mount a scope on your be installed without removing the front and rear sights.
  • Handgun Action Wrench System

    Handgun Action Wrench System

    HANDGUN ACTION WRENCH Changing barrels on handguns has become an accepted part of the custom SYSTEM pistolsmith’s job, as well as a fairly common occurrence in a “repair” gun shop. Without a proper action wrench, revolver frames can be sprung so badly out of shape that they are unusable. In addition, screwed-in barrels on auto pistols may be fitted tightly enough that it is a major job to remove them without damage to the receiver. These problems can be avoided by us- BINDER ing Brownells Handgun Action System or Handgun Wrench Heads on your Brownells Rifle Action Wrench System Handle. Action Wrench Heads for Smith & Wesson revolvers are made of alumi- RING num alloy and come complete with mounting/clamping bolts and washers. The Heads for Ruger Mark I/II .22 auto pistols are steel and use the same DATA clamping bolts as Rifle Action Wrench, two-piece heads. WARNING GUNSMITHS m m READ & FOLLOW THESE Never attempt to disassemble or reas- semble a firearm unless you are absolutely certain that it is empty and unloaded. Visually inspect the chamber, the magazine and firing INSTRUCTIONS mechanism to be absolutely certain that no ammunition remains in the firearm. Disassembly and reassembly should follow the manufacturer’s BROWNELLS instructions. If such instructions are not immediately available, contact the manufacturer to see if they are available. If they are not available at all, then you should consult other reference sources such as reference 200 S. Front St. Montezuma, IA 50171 books or persons with sufficient knowledge. If such alternative sources 800-741-0015 or 641-623-4000 • www.brownells.com World’s Largest Supplier of are not available and you have a need to disassemble or reassemble the Firearms Accessories and Gunsmithing Tools.™ firearm, you should proceed basing your procedures on common sense and experience with similarly constructed firearms.
  • Product Catalog

    Product Catalog

    PRODUCT2007 CATALOG NEW FOR 2007 LETTER FROM THE PRESIDENT Dear fellow shooters and hunters, At CZ-USA we are constantly adding new products and configurations to our CZ-USA is approaching its 10th Anniversary. product line to meet the sporting needs of the US customer. We are doing CZ 75 P-01 CZ RAMI P 10 years of serving American customers everything that we can to help our customers have a safe and successful with LaserGrips page 30 has left a permanent mark on me. I love the experience when using our products in the field, competition, or daily life. page 32 outdoors and the best of friends were met on hunting trips. I have visited very remote CZ 452 AMERICAN WITH 16" BBL places this past year and when I walked page 5 to a gun store and asked whether they carry CZ guns and the answer was “yes”, I knew we must have done something right. I felt gratitude to all customers, dedicated NEWCZ 550 ULTIMATE HUNTING RIFLE employees and loyal CZ owners who carried page 18 the word out all the way to the remote areas. The Uhersky Brod plant is the largest small arms factory in the world, I felt extremely proud to be associated with including over 200 acres of buildings alone. The factory was built in 1936. CZ over and over again. Just 12 months after the ground was broken, the first machines were turned on. Today’s portfolio includes superior bolt-action rifles (both rimfire and CZ 527 American left hand 10 years ago we started a long journey and centerfire) and semiautomatic pistols.
  • FIREARMS NEWS - Firearmsnews.Com VOLUME 70 - ISSUE 13

    FIREARMS NEWS - Firearmsnews.Com VOLUME 70 - ISSUE 13

    FORMERLY GUN SALES, REVIEWS, & INFORMATION VOLUME 70 | ISSUE 13 | 2016 PAGE 2 FIREARMS NEWS - firearmsnews.com VOLUME 70 - ISSUE 13 TM KeyMod™ is the tactical KeyMod is here! industry’s new modular standard! • Trijicon AccuPoint TR24G 1-4x24 Riflescope $1,020.00 • American Defense • BCM® Diamondhead RECON X Scope ® Folding Front Sight $99.00 • BCM Diamondhead Mount $189.95 Folding Rear Sight $119.00 • BCM® KMR-A15 KeyMod Rail • BCMGUNFIGHTER™ Handguard 15 Inch $199.95 Compensator Mod 0 $89.95 • BCMGUNFIGHTER™ ® BCMGUNFIGHTER™ KMSM • BCM Low Profile QD End Plate $16.95 • KeyMod QD Sling Mount $17.95 Gas Block $44.95 • BCMGUNFIGHTER™ • BCMGUNFIGHTER™ Stock $55.95 Vertical Grip Mod 3 $18.95 GEARWARD Ranger • ® Band 20-Pak $10.00 BCM A2X Flash • BCMGUNFIGHTER™ Suppressor $34.95 Grip Mod 0 $29.95 B5 Systems BCMGUNFIGHTER™ SOPMOD KeyMod 1-Inch Bravo Stock $58.00 Ring Light BCM® KMR-A Mount KeyMod Free Float For 1” diameter Rail Handguards lights $39.95 Blue Force Gear Same as the fantastic original KMR Handguards but machined from aircraft aluminum! BCMGUNFIGHTER™ VCAS Sling $45.00 BCM 9 Inch KMR-A9 . $176.95 KeyMod Modular BCM 10 Inch KMR-A10 . $179.95 BCM 13 Inch KMR-A13 . $189.95 Scout Light Mount BCM 15 Inch KMR-A15 . $199.95 For SureFire Scout BCM® PNT™ Light $39.95 Trigger Assembly Polished – Nickel – Teflon BCMGUNFIGHTER™ $59.95 KeyMod Modular PWS DI KeyMod Rail Handguard Light Mount Free float KeyMod rail for AR15/M4 pattern rifles. For 1913 mounted Wilson PWS DI 12 Inch Rail . $249.95 lights $39.95 Combat PWS DI 15 Inch Rail .
  • 6. Diamond Coring System Phase II (4500 Depth Capability)

    6. Diamond Coring System Phase II (4500 Depth Capability)

    Storms, M. A., Natland, J. H., et al., 1991 Proceedings of the Ocean Drilling Program, Initial Reports, Vol.132 6. THE DIAMOND CORING SYSTEM PHASE II (4500 M DEPTH CAPABILITY)1 Dan H. Reudelhuber2 and Steven P. Howard2 . Dedicated to the all of the many talented people Heave compensation and controls functioning, although off to (SEDCO/FOREX, Partech, DRECO, Tech Power Controls, Dr. a shaky start, eventually were operational, and the system Chuck McKinnon, and Duke Zinkgraf) who contributed to creat- provided effective secondary compensation. A problem with ing the diamond coring system. servo velocity signal quality was resolved by taking a completely different approach to acceleration measurement. Control elec- EXECUTIVE SUMMARY tronics were reliable, and the extra steps taken to protect the Leg 132 deployment and use of the Diamond Coring System electronics from the environment were successful. Weight On Bit (DCS) platform/mast assembly demonstrated the potential of the (WOB) control was good and allowed coring with measured WOB system for meeting scientific goals that cannot be realized with variations of ± 200-500 lb. Feed rate control mode was tested and conventional drilling techniques. That was due to the tremendous worked quite well. A load cell accuracy problem will have to be and diligent efforts of all parties concerned, both before and solved so that load measurement can be corrected. during Leg 132. Although some limited equipment problems were The new heavy-duty hydraulic wireline winch and 3/8 in. experienced, the problems were solved and the system was made sandline system made the retrieval of cores and downhole tools fully operational before the end of the first coring site.
  • Product Catalogue Česká Zbrojovka A.S

    Product Catalogue Česká Zbrojovka A.S

    Product catalogue Česká zbrojovka a.s. 75th Anniversary The year 2011 bears a great significance for Česká zbrojovka – this company will celebrate 75 years of its existence, which ranks this manufacturer among the most important and long established Czech companies. this company to expand its activities to other branches of The company was founded 80 per cent of its production is engineering, predominantly in in 1936 starting with production of exported to over one hundred the production of components a combined assortment of military countries worldwide. The first-rate designed for automobile and and civilian firearms. The first properties and performance of its aircraft industry. products were anti-aircraft firearms give Česká zbrojovka its At the 75th anniversary of the machine guns, military pistols and excellent reputation, in both company’s establishment Česká smallbore rifles. The current line of domestic and international zbrojovka will in 2011 Česká zbrojovka products includes markets. Significant successes commemorate this event with sporting and hunting firearms as reached by CZ-team of sport a special anniversary edition of well as duty weapons for armed shooters, which traditionally the CZ 75 pistol. These pistols will forces, police and other armed achieve top awards at the highest be copies of the legendary CZ units. Common features of all level of competition only enhance 75 model designed in 1970s. The firearms manufactured by Česká our world renowned brand name. upcoming retro version of the CZ zbrojovka are their high quality The purchase of state-of-the-art 75 pistol will not be presented only standard, long-term reliability and technologies together with more as an worldwide legend “dust-off”, accuracy.
  • Mauser Replacement Barrels

    Mauser Replacement Barrels

    Caldwell Hunter’s Blind Bag Page 11 Caldwell Muley Pod Wheeler Page 13 Level-Level-Level Page 47 Best Bore Brushes Page 38 Caldwell Vector Wind Flag Miles Gilbert Frankford Arsenal Page 15 Learn to Checker Kit Cartridge OAL Gage Page 29 Page 23 Table of Contents Adams & Bennett™ Replacement Rifle Barrels..................................................................................................................................................4-7 Caldwell™ Shooting Supplies..............................................................................................................................................................................8-17 CoreLite™ Synthetic Stocks ............................................................................................................................................................................18-19 Fajen® Stocks ....................................................................................................................................................................................................20-21 Frankford Arsenal™ Reloading Tools ..............................................................................................................................................................22-27 Miles Gilbert™ Stockmaking Supplies ............................................................................................................................................................28-31 PAST® Recoil Protection..................................................................................................................................................................................32-35
  • PRECISION-ARMAMENT-SPEC-SHEETS---RETAIL-MARCH2021.Pdf

    PRECISION-ARMAMENT-SPEC-SHEETS---RETAIL-MARCH2021.Pdf

    OUR COMPANY A modern CNC manufacturing facility based in Wellsville NY, Precision Armament specializes in high-end tactical firearm accessories including: muzzle devices/accessories, scope rails, control accessories, and bottom metal. Intended primarily for use on purpose-built tactical weapons as well as high performance competition and hunting rifles, our products are designed with an emphasis on rock solid reliability as well as accuracy, light-weight, and ergonomics. From the use of sophisticated FEA software to multi-axis machining of exotic materials, we utilize advanced technologies to continuously offer our customers the absolute best products available. Whether your life is on the line, or the hunt of a lifetime is at stake, you can depend on our products for unmatched and unfailing performance, and to assure this, every Precision Armament product is backed by a Full Lifetime Guarantee. OUR MISSION Through innovative thinking combined with the latest computer aided engineering technology, state of the art manufacturing, and advanced materials and coatings, our mission is to develop ultra-performance tactical products that are competitively priced, to satisfy even the most demanding civilian, military, and law-enforcement users. Precision Armament 4110 Niles Hill Road Wellsville, NY 14895 PH: 585∙593∙4975 FX: 585∙593∙5637 [email protected] Visit us at www.precisionarmament.com Hypertap® Muzzle Brake Engineered to be the Absolute Best KEY DESIGN FEATURES h 84% RECOIL REDUCTION* Advanced Convergent-Divergent (CD) port geometry yields maximum gas dynamic efficiency allowing unprecedented recoil reduction while maintaining safe baffle angles and bore clearance. h SAFE BAFFLE ANGLES Safe 35-degree impingement angles prevent dangerous splashback from reaching the shooter in the event of a baffle strike.
  • Owner's Manual

    Owner's Manual

    ™ SA-22 RIFLE MANUAL OWNER’S Important operating instructions for: BROWNING SA-22™ AUTOLOADING RIMFIRE RIFLES If you have any questions about your new firearm, this owner’s manual or other Browning products, contact: Browning Consumer Information One Browning Place Morgan, UT 84050-9326 Phone: (801) 876-2711 browning.com Please use the space below to record information about your new firearm. Model __________________________________________________ Serial Number ____________________________________________ Purchased From __________________________________________ Date of Purchase __________________________________________ THANK YOU FOR CHOOSING BROWNING. The SA-22 is an authentic Browning, designed by the master gunmaker John Moses Browning himself, and certainly a rifle you will be proud to own. It was revolutionary in its day, and remains the standard by which other .22 caliber autoloaders are judged. It has an unequaled reputation for dependability and handling, and follows the Browning tradition of superb craftsmanship, handsome styling and proven dependability. With a reasonable amount of care, your SA-22 rifle is designed to give you many years of dependable, enjoyable service. Specifications within this owner’s manual are correct at the time of printing and subject to change without notice. CONTENTS PAGE State Warning ...........................................................................................2 WARNING: You Are Responsible For Firearms Safety ........................2 General Description and Operation .....................................................10
  • The Bears Pit

    The Bears Pit

    Subject: Weapons & Items Requests for UC-1.13/DL-1.13/AFS Posted by Wil473 on Mon, 08 Aug 2011 22:28:31 GMT View Forum Message <> Reply to Message Looks like Smeagol beat me to creating one of these. As I am sharing items between the three mods, spinning out a thread for weapon and item requests. Please include at a minimum: - link to more information - rational why I should be adding your favourite gun to three different mods (I've included a list of weapons already in-mod to avoid embarrassing incidents of duplication) - description to item (bonus points if it is usable in-game) - graphics (bonus points if they are usable in-game, and you are the artist so I don't need to track anyone down for permission) Note, that with New Magazine System (NMS) in the works, this thread will be mostly to gather information for future "Advance Capability" versions of the mods that will be created after the current "offical" cycle of v1.13 releases. Specifically NMS, so far, has a few features that not only simplifies adding unique magazine capacities and multiple magazine capacities, but on considering what ChrisL has already stated to be his plans for NMS, features that can be exploited (ie. not ChrisL's intention, but I plan on abusing it for this purpose) to make supporting a common item list between multiple mods much easier... EDIT (2016/10/03): This thread has been replaced by The 2nd Weapons & Items Requests for UC-1.13/DL-1.13/AFS noticed the list was broken when clearing the Sticky flag on this thread.