DOCSLIB.ORG

Snaphaunce Lock of a Hunting Rifle, Ca. 1580

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Snaphaunce Lock of a Hunting Rifle, Ca. 1580 Snaphaunce Lock of a Hunting Rifle, ca. 1580 Private O wnership copyright 2011, Peter H. Kunz, CH-8200 Schaffhausen Übersicht 1 German Pistol with Nürnberg Snaphance Lock, ca. 1570, Photo 2 Hunting Rifle with Nürnberg Snaphance Lock, German, ca. 1580, Photo 3 Hunting Rifle with Nürnberg Snaphance Lock, ca. 1580, Photo 4 Replica, Nürnberg Snaphance Lock, ca. 1570, Front View, Drawing 5 Replica, Lock Plate, Drawing 6 Replica, Flash Pan, Pan Cover, Pan Cover Spring, Release, Drawing 7 Replica, Cock, Cock Screw, Drawing 8 Replica, Steel, Steel Spring, Steel Lug, Drawing 9 Replica, Main Spring, Tumbler, Bearing, Drawing 10 Replica, Trigger Bar, Trigger Lever, Trigger Bearings, Trigger Springs, Drawing 11 Replica, Mounting Srews, Drawing 12 Replica, Assembly Drawing, Front View 13 Replica, Assembly Drawing, Rear View 14 Replica Nürnberg Snaphance Lock, Front View, Photo 15 Replica Nürnberg Snaphance Lock, Rear View, Photo German Pistol with Nürnberg Snaphance Lock, ca. 1570 Tower of London Proposed Lock fore Replica 1 1079 Hunting Rifle with Nürnberg Snaphance Lock German, ca. 1580 Caliber 20 mm Pitt Rivers Museum, Oxford 2 Hunting Rifle with Nürnberg Snaphance, ca. 1580 Private Collection Proposed Lock to be reconstructed 3 212 Nürnberg Snaphance Lock, ca. 1570 Replica, Front View Scale 1:1 4 212 176 151 120 83 1/4" 3/16" 3/16" 10 3/16" 8.5 8.5 1/4" 8 3/16" 6.5 3/16" 22.5 3/16" 56 88 160 188 195 200 Nürnberg Snaphance Lock, ca. 1570 Replica, Lock Plate The Dimensions have to be matched to the Dimensions of the other Component of the Lock. Scale 1:1 5 24 3 16 19 30 22 30 5 8 7 6 16 10.5 19 9.5 65 19 5 6.4 Pan Cover Pan Cover Spring 12 Flash Pan 7 4 22 6 336 77 25 49 Stop Pin for Pan Cover 14 4.5 8.5 12 3 Pan Cover Release 13 Nürnberg Snaphance Lock, ca. 1570 7 Replica, Flash Pan, Pan Cover, Pan Release Bearing 4 The Dimensions have to be matched to the Dimensions of the other Component Cover Spring, Release of the Lock. Stop Pin for Release 6 Scale 1:1 22 22 6.5 4.5 33 5 22 1 15° 11 10 4 10 4 8 4 11 14 Cock Lower Cock Lipp 15 8 22 3/8" 3.5 12 10 The Dimensions have to be matched to 20 the Dimensions of the other Component 9.5 of the Lock. 1/4" 22 33 11 12 Cock Screw Nürnberg Snaphance Lock, ca. 1570 Replica, Cock, Cock Screw Upper Cock Lipp Scale 1:1 7 12 Surface hardened Steel 5.2 4.5 22 7 13 9 Steel Lug 12 4 40 5.2 5.2 7 Steel Spring 10 7.5 7* 7* 11* * have to be adjusted to the Cock Spring under Tension Nürnberg Snaphance Lock, ca. 1570 The Dimensions have to be matched to the Dimensions of the other Component Replica, Steel, Steel Spring, Steel Lug of the Lock. Scale 1:1 8 112 20 Inside Bearing 99 106 1.5 11 83 Main Spring 5.2 4 Tumbler 20 16 25.7 10 14.2 7.5 4 4.9 11 3.2 45° 2 8x8 8 Nürnberg Snaphance Lock, ca. 1570 Replica, Main Spring, Tumbler, Bearing The Dimensions have to be matched to the Dimensions of the other Component Scale 1:1 of the Lock. 9 44 Einsatzgehärtet 3 1 3 19 29 31 2.5 15 5 Trigger Lever Pan Cover Spring Trigger Bar 6 336 6 336 30 4.5 4.5 8.5 8.5 12 12 Trigger Bar Spring 13 13 Trigger Lever Bearing Trigger Bar Bearing Nürnberg Snaphance Lock, ca. 1570 Replica, Trigger Bar, Trigger Lever, Trigger The Dimensions have to be matched to the Dimensions of the other Component Bearings, Trigger Springs of the Lock. 10 Scale 1:1 7.5 7.5 7 7 5.8 3/16" 3/16" 3/16" 1 Main Spring Screw 1 Flash Pan Cover Screw 1 Inside Bearing Screw 3/16" 2 Steel Lug Screws 4 6 13 3 3 3/16" 3/16" M3 2 Flash Pan Screws M3 1 Cock Monting Spring 1 Release Screw 2 Trigger Screws Nürnberg Snaphance Lock, ca. 1570 Replica, Mounting Scews Scale 2:1 11 Cock Screw Flash Pan Cover Upper Cock Lipp Steel Lower Cock Lipp Cock Stop Pin for Release Stop Pin Lock Plate Flash Pan Release Bearing Steel Lug Cock Mounting Spring Steel Spring Pan Cover Spring Stop Pin for Pan Cover Pan Cover Release Flash Pan Cover Steel Lug Screws Release Screw Screw Nürnberg Snaphance Lock, ca. 1570 Replica, Assembly Drawing, Front View Scale 1:1 12 Inside Bearing Screw Lock Plate Inside Bearing Flash Pan Tumbler Flash Pan Screws Bearing Screws Trigger Bar Main Spring Screw Trigger Lever Trigger Bar Bearing Main Spring Trigger Lever Bearing Trigger Lever Spring Nürnberg Snaphance Lock, ca. 1570 Replica, Assembly Drawing, Rear View Scale 1:1 13 Replica Nürnberg Snaphance Lock, Front View (Original ca. 1570) 14 Replica Nürnberg Snaphance Lock, Rear View (Original ca. 1570) 15 End 16.
Load more

Recommended publications
  • Ming China As a Gunpowder Empire: Military Technology, Politics, and Fiscal Administration, 1350-1620 Weicong Duan Washington University in St
    Washington University in St. Louis Washington University Open Scholarship Arts & Sciences Electronic Theses and Dissertations Arts & Sciences Winter 12-15-2018 Ming China As A Gunpowder Empire: Military Technology, Politics, And Fiscal Administration, 1350-1620 Weicong Duan Washington University in St. Louis Follow this and additional works at: https://openscholarship.wustl.edu/art_sci_etds Part of the Asian History Commons, and the Asian Studies Commons Recommended Citation Duan, Weicong, "Ming China As A Gunpowder Empire: Military Technology, Politics, And Fiscal Administration, 1350-1620" (2018). Arts & Sciences Electronic Theses and Dissertations. 1719. https://openscholarship.wustl.edu/art_sci_etds/1719 This Dissertation is brought to you for free and open access by the Arts & Sciences at Washington University Open Scholarship. It has been accepted for inclusion in Arts & Sciences Electronic Theses and Dissertations by an authorized administrator of Washington University Open Scholarship. For more information, please contact [email protected]. WASHINGTON UNIVERSITY IN ST. LOUIS DEPARTMENT OF HISTORY Dissertation Examination Committee: Steven B. Miles, Chair Christine Johnson Peter Kastor Zhao Ma Hayrettin Yücesoy Ming China as a Gunpowder Empire: Military Technology, Politics, and Fiscal Administration, 1350-1620 by Weicong Duan A dissertation presented to The Graduate School of of Washington University in partial fulfillment of the requirements for the degree of Doctor of Philosophy December 2018 St. Louis, Missouri © 2018,
    [Show full text]
  • An Examination of Flintlock Components at Fort St. Joseph (20BE23), Niles, Michigan
    Western Michigan University ScholarWorks at WMU Master's Theses Graduate College 4-2019 An Examination of Flintlock Components at Fort St. Joseph (20BE23), Niles, Michigan Kevin Paul Jones Follow this and additional works at: https://scholarworks.wmich.edu/masters_theses Part of the Anthropology Commons Recommended Citation Jones, Kevin Paul, "An Examination of Flintlock Components at Fort St. Joseph (20BE23), Niles, Michigan" (2019). Master's Theses. 4313. https://scholarworks.wmich.edu/masters_theses/4313 This Masters Thesis-Open Access is brought to you for free and open access by the Graduate College at ScholarWorks at WMU. It has been accepted for inclusion in Master's Theses by an authorized administrator of ScholarWorks at WMU. For more information, please contact [email protected]. AN EXAMINATION OF FLINTLOCK COMPONENTS AT FORT ST. JOSEPH (20BE23), NILES, MICHIGAN by Kevin P. Jones A thesis submitted to the Graduate College in partial fulfillment of the requirements for the degree of Master of Arts Anthropology Western Michigan University April 2019 Thesis Committee: Michael S. Nassaney, Ph.D., Chair José A. Brandão, Ph.D. Amy S. Roache-Fedchenko, Ph.D. Copyright by Kevin P Jones 2019 ACKNOWLEDGMENTS I want to thank my Mom and Dad for everything they do, have done, and will do to help me succeed. Thanks to my brothers and sister for so often leading by example. Also to Rod Watson, Ihsan Muqtadir, Shabani Mohamed Kariburyo, and Vinay Gavirangaswamy – friends who ask the tough questions, like “are you done yet?” I want to thank advisers and supporters from past and present. Dr. Kory Cooper, for setting me out on this path; Kathy Atwell for providing me an opportunity to start; my professors and advisers for this project for allowing it to happen; and Lauretta Eisenbach for making things happen.
    [Show full text]
  • Early English Firearms: a Re-Examination of the Evidence
    W&M ScholarWorks Dissertations, Theses, and Masters Projects Theses, Dissertations, & Master Projects 1990 Early English Firearms: A Re-examination of the Evidence Beverly Ann Straube College of William & Mary - Arts & Sciences Follow this and additional works at: https://scholarworks.wm.edu/etd Part of the American Studies Commons Recommended Citation Straube, Beverly Ann, "Early English Firearms: A Re-examination of the Evidence" (1990). Dissertations, Theses, and Masters Projects. Paper 1539625569. https://dx.doi.org/doi:10.21220/s2-x5sp-x519 This Thesis is brought to you for free and open access by the Theses, Dissertations, & Master Projects at W&M ScholarWorks. It has been accepted for inclusion in Dissertations, Theses, and Masters Projects by an authorized administrator of W&M ScholarWorks. For more information, please contact [email protected]. EARLY ENGLISH FIREARMS: A RE-EXAMINATION OF THE EVIDENCE A Thesis Presented to The Faculty of the American Studies Program The College of William and Mary in Virginia In Partial Fulfillment Of the Requirements for the Degree of Master of Arts by Beverly A. Straube 1990 APPROVAL SHEET This thesis is submitted in partial fulfillment of the requirements for the degree of Master of Arts A . — Author Approved, August Tames D. Lavin Department of Modern Languages Barbara G./ Carson Jay Gayn<tor The Colonial Williamsburg Foundation DEDICATION To my British parents Edwyn and Ruth Hardy who are amused and pleased that their American-born daughter should be digging up and studying the material remains of her English forebears. TABLE OF CONTENTS PREFACE .............................................. V ACKNOWLEDGMENTS..... ............................... vii LIST OF FIGURES ....................................... ix ABSTRACT ............................................. xii INTRODUCTION .........................................
    [Show full text]
  • First Steps Towards an Introduction Into the Study of Early Gunmaking in The
    %st Steps Towards an Introduction Into the Study of Zarly Gunmaking in the Portuguese World, y Rainer Daehnhardt It had been suggested by a close friend of mine that a short preface to this tudy should clarify the technical specification of the term "flintlock." The name by itself explains that it is an ignition system for firearms in which flint is being used. This separates the flintlock from the matchlock and the vheellock. Torsten Lenk, who was the first to dedicate many years of study to the evolu- ion of flintlock firearms, defines the flintlock as having a combined steel and lancover and a vertical working sear. This definition was fine to separate the snaphaunce locks but it started to ~uzzleall students of the history of firearms when the early forms of Portu- uese flintlocks were discovered: Nowadays we set the definition in the following way: If the steel and pan- over are combined and the sear works vertically in the French way we speak f a true flintlock or a French type of flintlock. If the steel and pancover are divided we speak of a snaphaunce lock: If the steel and pancover are combined but the sear works in another way, ifferent from the French type, then we call the lock by the name which it origi- .ally had during its working life, but we still consider it a flintlock: The variety of such locks is quite large. In Portugal alone there were used 17 ifferent types of flintlock mechanisms, each of them having its own name. Two of these types of flintlocks appeared in the early XVIth century and pre- .ate the generally known history of flintlock firearms for almost a century.
    [Show full text]
  • Cleaning a Brown Bess
    bess file:///K:/18resources/bess.html Cleaning a Brown Bess This is a modern process for cleaning the Brown Bess musket. The process is not period correct but the 21st Century way to keep your musket looking and working like new. This is how I clean my Brown Bess. All of the cleaning tools are attached to the ramrod with a female/female adapter. The cleaning tools must be sized for the Bess. Don't use a smaller diameter (caliber). The barrel is never removed from the stock - on a Brown Bess you take too much of a chance of loosening or losing the pins. 1. I start by running a breech scraper down the barrel. When you first pull this out do it over a pail because a lot of residue powder is coming out with it. The first time it is hard to pull out and it gets easier the second and third time. 2. Now use the breech scraper to clean the breech plug. Put it down the barrel again and turn it on the plug - when it hits bottom you are scraping the plug. Remove the rod and tip the barrel into a pail and more powder reisdue will pour out. Do this a few times. 3. Now remove the lock from the stock - just unscrew the two screws on the back and be careful not to drop the lock off the musket. It all goes back together easily so don't be concerned about taking it off. 4. With the lock off you need to plug the touchhole.
    [Show full text]
  • The Death of the Knight
    Academic Forum 21 2003-04 The Death of the Knight: Changes in Military Weaponry during the Tudor Period David Schwope, Graduate Assistant, Department of English and Foreign Languages Abstract The Tudor period was a time of great change; not only was the Renaissance a time of new philosophy, literature, and art, but it was a time of technological innovation as well. Henry VII took the throne of England in typical medieval style at Bosworth Field: mounted knights in chivalric combat, much like those depicted in Malory’s just published Le Morte D’Arthur. By the end of Elizabeth’s reign, warfare had become dominated by muskets and cannons. This shift in war tactics was the result of great movements towards the use of projectile weapons, including the longbow, crossbow, and early firearms. Firearms developed in intermittent bursts; each new innovation rendered the previous class of firearm obsolete. The medieval knight was unable to compete with the new technology, and in the course of a century faded into obsolescence, only to live in the hearts, minds, and literature of the people. 131 Academic Forum 21 2003-04 In the history of warfare and other man-vs.-man conflicts, often it has been as much the weaponry of the combatants as the number and tactics of the opposing sides that determined the victor, and in some cases few defeated many solely because of their battlefield armaments. Ages of history are named after technological developments: the Stone Age, Bronze Age, and Iron Age. Our military machine today is comprised of multi-million dollar airplanes that drop million dollar smart bombs and tanks that blast holes in buildings and other tanks with depleted uranium projectiles, but the heart of every modern military force is the individual infantryman with his individual weapon.
    [Show full text]
  • Smoke Signal
    ALAMO MUZZLE LOADING GUN CLUB www.amlgc.org SMOKE SIGNAL 20 August 18 .22 rifle raffle winner! Congratulations to Rollin Mangold, the winning ticket at July’s raffle. Range News AMLG Club expands range by 11.79 acres The size of our gun range recently expanded by approximately a third with the acquisition of close to 12 acres of land directly behind the south end of our existing range property. Many of you noticed that the land directly west of us had come up for sale. The land under offer also contained a parcel directly behind our range. The board of directors faced the concern that the land could have 1 been acquired for development of houses or buildings, which would create all kinds of repercussions and potential problems down the road. It also might entail the best chance to acquire the parcel and help preserve an improved range facility for future members and generations of muzzle-loaders, target shooters, hunters, and enthusiasts of the shooting sports. There are any number of gun ranges that have been shut down when development, re-zoning, subdivision, and house building has resulted in noise complaints, legal actions, lawsuits, and fees that ranges are often ill-disposed to pay. The board of directors voted unanimously to attempt to purchase the land immediately behind the range as a buffer zone for the range. After months of negotiations, the BoD and the land owners came to an agreement to divide the property into different tracts or parcels, one of which would be 11.79 acres directly behind the range.
    [Show full text]
  • Antique Arms, Armour & Modern Sporting Guns
    ANTIQUE ARMS, ARMOUR & MODERN SPORTING GUNS Wednesday 11 & Thursday 12 May 2016 Knightsbridge, London ANTIQUE ARMS, ARMOUR & MODERN SPORTING GUNS Wednesday 11 & Thursday 12 May 2016 Knightsbridge, London Antique Arms & Armour Lots 1 - 393 at 1pm Modern Sporting Guns Lots 400 - 652 at 2pm BONHAMS ENQUIRIES PRESS ENQUIRIES Montpelier Street Antique Arms & Armour [email protected] IMPORTANT INFORMATION Knightsbridge, Director Please note that lots of Iranian London SW7 1HH David Williams CUSTOMER SERVICES and Persian origin are subject Monday to Friday www.bonhams.com +44 (0) 20 7393 3807 to US trade restrictions which 8.30am – 6pm +44 (0) 776 882 3711 mobile currently prohibit their import +44 (0) 20 7447 7447 VIEWING [email protected] into the United States, with no Sunday 8 May exemptions. 11am – 3pm Modern Sporting Guns SALE NUMBERS Monday 9 May Head of Department Antique Arms & Armour Similar restrictions may apply 9am – 4.30pm Patrick Hawes 23564 to other lots. 9am - 7pm +44 (0) 20 7393 3815 Tuesday 10 May +44 (0) 781 868 4869 mobile Modern Sporting Guns It is the buyers responsibility 9am – 4.30pm [email protected] 23566 to satisfy themselves that the Wednesday 11 May lot being purchased may be 9am – 12pm (Antique Arms) Administrator CATALOGUE imported into the country of 9am – 4.30pm (Modern Guns) Harriet Munckton £20 destination. Thursday 12 May +44 (0) 20 7393 3947 The United States Government Please see page 2 for bidder 9am - 12pm [email protected] has banned the import of ivory information including after-sale into the USA. Lots containing collection and shipment BIDS Junior Cataloguer ivory are indicated by the +44 (0) 20 7447 7447 Max Quigley symbol Ф printed beside the lot Please see back of catalogue +44 (0) 20 7447 7401 fax +44 (0) 20 7393 3816 number in this catalogue.
    [Show full text]
  • A Note on Flint-Locks, and the Flintlock
    ASAC_Vol105_05-Gooding_110015.qxp 10/5/12 2:23 PM Page 29 A Note on Flint-locks, and the Flintlock By S. James Gooding* In this publication, “flintlock” or “French lock” will be used to identify the flint mechanism with a joined hammer and pan cover (frizzen), an internal mainspring, and a vertical act- ing sear working on a notched tumbler. This is based upon Urquhardt’s translation from the Swedish of Torsten Lenk’s Flintlaset, All other flint-using locks will be recognized as flint- locks, with a modifier if more precise identification is required. In the study of firearms history, early arms terminology has been accurately adopted by some historians, but just as frequently it has been changed by some writers to suit the occasion. When starting to pull this ‘talk’ together I dug out some previously unpublished notes dated as early as 1982 on the same theme with the title “A Snaphance by any other name would still be a Flint Lock.”One of them had a subtitle based on an old expression often used by my mother “Fools rush in, where angels fear to tread.” Perhaps it is a fool’s errand to attempt to make changes to more than 300 years of language evolution but I believe it is worth a try. Early gun locks can readily be placed in the order of evolution based upon the four major sources for ignition; express the differences between ‘flint lock,’ ‘flint-lock’ and ‘flintlock’? 1. Match, 2. Pyrites, 3. Flint, 4. Fulminate This paper will look at the English language and how it The matchlock with its smoldering match, the wheel- has adapted some foreign vocabulary to put names to the lock with its pyrites and wheel, and the many forms of per- flint-using ignitions.
    [Show full text]
  • 18Th Century Small Arms Manual
    1 2 TABLE OF CONTENTS Page Part I: Introduction 1 Part II: Nomenclature 2 Part III: Inspection and Maintenance 6 A. Frequency of Inspections 6 B. Inspection Checklist 8 C. Dissassembling and Assembling the Musket 9 D. Accoutrement Inspection 10 E. Field Cleaning and Care of the Flint-Lock 12 F. Basic Tools for Gunsmithing 13 Part IV: Drill 14 A. Introduction to the Manual Exercise 14 B. List of Required Motions 15 C. Of the Instruction of Recruits 16 D. The Manual Exercise 18 1. Inspection of Arms 19 2. Handling the Weapon 22 3. The Firings 30 E. The Rifle, Pistol, and Carbine 38 3 Part V: Misfire Procedures 39 A. Failure to Spark 39 B. Flash in the Pan 40 C. Firing in Ranks 40 D. Final Clearing Procedures 41 E. Safety Notes 41 Part VI: Laboratory 42 A. Blank Cartridge Manufacture 42 B. Fixing Flints 45 Part VII: Demonstration Critique 46 Part VIII: Competency Examination 47 Glossary 48 Bibliography 50 4 PART I - INTRODUCTION This manual sets forth procedures that must be followed Demonstrators must be: by persons demonstrating flintlock muskets in areas administered by the National Park Service (NPS). Included 1. Competent to execute the required manual of exercise or are instructions on proper maintenance, inspection, and applicable park manual without error. repair procedures. This manual must be used in conjunction with the service-wide standards for Historic Weapons Firing 2. Able to perform the appropriate misfire procedures Demonstrations (DO-6 Guidelines for Interpretation). without mistake. The information contained herein has been culled 3. Skilled in the proper manner of presenting principally from primary sources of the period during which demonstrations with maximum safety to themselves and the original weapons were used.
    [Show full text]
  • American Arms in the Tower
    Tower of London. Lithograph by Daniell, 1804. The Proof House and smiths' workshops are on the wharf in the foreground. Reprinted from the American Society of Arms Collectors Bulletin 50:22-39 Additional articles available at http://americansocietyofarmscollectors.org/resources/articles/ American Arms in the Tower Howard L. Blackmore For the purpose of this short paper, I have used the words 'American Arms' in their widest sense, to mean not only weapons made in America but those used or invented in America. It is not my intention to list all the various firearms (they are nearly all firearms I am afraid) which come into those categories in the Tower - that would be a lengthy and tedious process - but rather to comment on the inter- change of firearm design and development that took place between the two countries on either side of the Atlantic and to highlight some of the more interesting weapons. Perhaps I can also emphasise the special relationship which has always existed between the Tower of London and North America. May I first briefly review the activities of the Board of Ordnance in London as it affected the contents of the Armouries collections of today. The Government Depart- ment responsible for the supply of weapons to the British Army and Navy from the 16th century up to the middle of according to the whim of the maker and the lock systems, the 19th century, its headquarters in the Tower of London, matchlock, flintlock and wheellock, were in their most con- consisted of a large number of offices, store rooms, work- fused.state of evolution.
    [Show full text]
  • Gun Lock Instructions
    CABLE-STYLE GUN LOCK INSTALLATION INSTRUCTIONS “B” This lock consists of an armored steel cable with one end permanently secured to a keyed padlock. When lock is properly installed, the firearm is unloaded and the lock prevents the firearm’s action from closing. This cable-style gun lock meets the requirements of ASTM F 2369 and is a California AB106 Department of Justice-approved safety device. The cable-style lock supplied in this Project ChildSafe® safety kit should be used in addition to, and not as a substitute for, safe firearms han- dling and storage methods. As a firearms owner, it is YOUR RESPONSIBILITY to know how to safely handle and securely store your firearms. Please read the Project ChildSafe safety booklet included in this kit and your firearm’s owner’s manual for safe handling and storage methods. ! GUN LOCK SAFETY TIPS I Keep cable and lock outside of trigger guard at all times. I Always push cable into padlock and turn key until securely locked. After removing key, tug on cable to ensure connection is secure. I Store key to the gun lock and the firearm separately. Be sure to store key in a location inaccessible to unauthorized persons, particularly children. I Do not work the firearm’s action with the lock in place. This may damage the lock and/or the firearm. I If the lock’s protective coating becomes damaged or separated from the steel cable or the lock face, replace the lock. ABOUT LOCKING DEVICES: No single lock will fit all firearms. The lock supplied in this Project ChildSafe safety kit will fit the actions of many commonly owned firearms (see installation instructions below).
    [Show full text]