Low-Loss, High-Reflectance Dielectric Mirror Coatings

Total Page：16

File Type：pdf, Size：1020Kb

Low-Loss, High-Reflectance Dielectric Mirror Coatings BARR PRECISION OPTICS & THIN FILM COATINGS Materion Barr Precision Optics & Thin Film Coatings is a leading manufacturer and supplier of precision optical filters, hybrid circuits, flexible thin films and custom thin film coating services. We offer coating solutions for manufacturers in the defense, commercial, space, science, astronomy and thermal imaging markets. Low-Loss, High-Reflectance Dielectric Mirror Coatings Applications include single or multi-band laser systems, commercial 1-Band Mirror Coating optical components, infrared defense and aerospace components and flight instruments. Advanced Coating and Process Features n Reflectance >99.9999% over selected spectral range n Multiple band coverage, 500 to 5000 nm n Custom designed to your spectral requirements % Reflectance n Absorption and scatter each <100 ppm n High laser damage threshold n Small optic production quantity runs or optics up to Wavelength in nm 22 inch in diameter and 110 pounds 3-Band Mirror Coating n Glass, Si, Al, Zerodur, ULE or Be substrates n Flat or curved optics or deformable mirrors n Low mechanical stress for procision figured optics n Low temperature coating process for optic safety Most Rugged Coatings Available n Durable ion-assisted refractory-oxide coatings % Reflectance n Meets all common military specifications for durability n Adhesion n Humidity Wavelength in nm n Abrasion n Salt fog n Temperature cycle n Cleanability (lab or field) n Plus: n Space qualified n Flight and field tested n Radiation hard Materion a global advanced materials company, dedicated to providing solutions that enable our customers’ technologies and drive their growth. Our products include precious and non-precious specialty metals, precision optical filters, inorganic chemicals and powders, specialty coatings, specialty-engineered beryllium alloys, beryllium and beryllium composites, and engineered clad and plated metal systems. Materion business is structure to enhance our ability to provide customers with innovative, best total-cost solutions. FOR PRECISION OPTICAL COATING PRODUCTS FOR CUSTOM THIN FILM COATING PRODUCTS MATERION CORPORATION 2 Lyberty Way 153 Industrial Way www.materion.com Westford, MA 01886 Buellton, CA 93427 Phone: +1 978.692.7513 Phone: +1 805.688.4949 www.materion.com/barroptics www.materion.com/barroptics BPO High Refl Mirror Coating Rev 01 02 11.

Copy Link

Recommended publications

Active Laser Radar for High-Performance Measurements
Proceedings of the 1998 IEEE International Conference on Robotics& Automation Leuven, Belgium o May 1998 ACTIVE LASER RADAR , FOR HIGH-PERFORMANCE MEASUREMENTS John Hancocka, Dirk Langern, Martial Heberta, Ryan Sullivanb, Darin Ingimarsonb, Eric Hoffmanb, Markus Mettenleiterc, Christoph Froehlichc a: The Robotics Institute, Carnegie Mellon Univ. (CMU), Pittsburgh, PA 15213, USA b: K2T, Inc. One South Linden St., Duquesne, PA 15110, USA c: Zoner + Froehlich (Z+F), Simoniusstr. 22, D-88239 Wangen, Germany autonomous vehicle navigation and obstacle detection, ABSTRACT: Laser scanners, or laser radars (ladar), quarry mapping, landfill surveying, and hazardous en- have been used for a number of years for mobile robot vironment surveying. The current state of the art for non navigation and inspection tasks. Although previous scan- tactile measurements is unable to meet the demand of ners were sufficient for low speed applications, they often many of these applications. Typical systems are slow and did not have the range or angular resolution necessary for unable to measure with an unobstructed field of view. mapping at the long distances. Many also did not provide an ample field of view with high accuracy and high We have created a laser radar that overcomes these limita- precision. tions and provides a system that will meet the existing demand for more advanced environmental imaging. It has In this paper we will present the development of state-of- been developed for visual inspection tasks in both indoor the-art, high speed, high accuracy, 3D laser radar techno- and outdoor environments. The system is art optical radar, logy. This work has been a joint effort between CMU and and is comparable to devices built by Erim, Odetics, and K2T and Z+F.
[Show full text]
Status of Optical Coatings for the National Ignition Facility
UCRL-CONF-153485 Photothermal multi-pixel imaging microscope Christopher J. Stolz, Diane J. Chinn, Robert D. Huber, Carolyn L. Weinzapfel, and Zhouling Wu This article was submitted Boulder Damage Symposium XXXV Annual Symposium on Optical Materials for High Power Lasers Boulder, Colorado September 22-24, 2003 December 1, 2003 U.S. Department of Energy Lawrence Livermore National Laboratory Approved for public release; further dissemination unlimited This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or the University of California, and shall not be used for advertising or product endorsement purposes. Updated October 14, 2003 Photothermal multi-pixel imaging microscope Christopher J. Stolza, Diane J. Chinna, Robert D. Hubera, Carolyn L. Weinzapfela, and Zhouling Wub aUniversity of California, Lawrence Livermore National Laboratory, 7000 East Avenue L-491, Livermore, CA 94550 bValuTech Corporation, 5951 Corte Cerritos, Pleasanton, CA 94566 ABSTRACT Photothermal microscopy is a useful nondestructive tool for the identification of fluence-limiting defects in optical coatings.
[Show full text]
Optical Coating Capabilities
6/7/2021 Optical Coating Capabilities | Optical Filter Coatings | Andover ISO 9001 AS 9100 ITAR Toll Free (US): +1 (888) 8939992 International: +01 (603) 893 6888 LOGIN CHECKOUT Search CONTROL THE LIGHT, SEE YOUR WORLD Standard & Custom Optical Filters and Coatings Home / Optical Filters & Assemblies | Coating Capabilities | Andover / Optical Coating Capabilities | Optical Filter Coatings | Andover OPTICAL COATING CAPABILITIES What is an Optical Filter Coating? An optical coating is one or more thin layers of material deposited on an optical component such as a lens or mirror, which alters the way in which the optic reflects and transmits light. One type of optical coating is an antireflection coating, which reduces unwanted reflections from surfaces, and is commonly used on spectacle and photographic lenses. Another type is the highreflector coating which can be used to produce mirrors that reflect greater than 99.99% of the light which falls on them. More complex optical coatings exhibit high reflection over some range of wavelengths, and antireflection over another range, allowing the production of dichroic thinfilm optical filters. Technologies Andover has a variety of optical coating technologies at its disposal, providing customers with solutions tailored to their specific applications. Technologies include: Magnetron Sputtering IonAssisted EBeam deposition Resistance Evaporation Hybrid Technologies We can design and manufacture coatings to meet your most demanding requirements. Range of Wavelengths from 193nm to 14 microns, on a wide variety of substrate materials including BK7, filter glass, borosilicate glass, Silicon, Germanium, Sapphire, Fused Silica, Calcium Fluoride, Zinc Selenide, Zinc Sulfide, and more. All Andover chambers are internally custombuilt, computercontrolled, and use the latest deposition techniques.
[Show full text]
Download Optical Coatings Datasheet
Optical Coatings The Fresnel reflection at the boundary of media with different 1.1. Protected Aluminum refractive indices and interference in thin films allow the optical 1.1.1. Aluminum mirrors with SiO2 and SiO protective coating are components reflecting and transmitting properties to be selectively among the most commonly used. This coating is mechanically strong and controllably changed. The reflection from the surface of the optical enough for most applications, but reduces a bit the reflection in the part in the selected spectral range can be escalated or suppressed by UV. In addition, it has some absorption by 3 μm (water) and by 9-11 μm applying special optical coatings. Additionally, the applied films can (Si-O bond). modify the physical properties of the optical component surface, for example, to increase its resistance to moisture and/or dust. Wavelength, μm Average reflectance, % Damage threshold, J/cm2, 50 ns pulse Tydex makes a wide range of optical coatings for our components 0.25-20.0 >90 0.25-0.3 from all processed materials. The spectrum is from near UV to far IR and millimeter range. The electron beam and resistive evaporation with ionic surface cleaning of parts and ion assisting are used at Balzers BAK-760 (Liechtenstein), VU-1AI and VU-2MI (Belarus) installations for depositing the optical coatings. Our coatings are not limited to a standard set of designs. On the contrary, we try our best to satisfy the customer’s requirements. Please contact us and we will do our best to solve your problem as fully as possible.
[Show full text]
Light Trapping in Thin Film Organic Solar Cells
Light trapping in thin film organic solar cells Zheng Tang, Wolfgang Tress and Olle Inganäs Linköping University Post Print N.B.: When citing this work, cite the original article. Original Publication: Zheng Tang, Wolfgang Tress and Olle Inganäs, Light trapping in thin film organic solar cells, 2014, Materials Today, (17), 8, 389-396. http://dx.doi.org/10.1016/j.mattod.2014.05.008 Copyright: Elsevier / Elsevier: Creative Commons http://www.elsevier.com/ Postprint available at: Linköping University Electronic Press http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-103929 Materials Today Volume 17, Number 8 October 2014 RESEARCH Review Light trapping in thin film organic solar cells RESEARCH: Zheng Tang*, Wolfgang Tress and Olle Ingana¨s* Biomolecular and Organic Electronics, IFM, and Center of Organic Electronics, Linko¨ping University, SE-581 83 Linko¨ping, Sweden A major issue in organic solar cells is the poor mobility and recombination of the photogenerated charge carriers. The active layer has to be kept thin to facilitate charge transport and minimize recombination losses. However, optical losses due to inefficient light absorption in the thin active layers can be considerable in organic solar cells. Therefore, light trapping schemes are critically important for efficient organic solar cells. Traditional light trapping schemes for thick solar cells need to be modified for organic thin film solar cells in which coherent optics and wave effects play a significant role. In this review, we discuss the light trapping schemes for organic thin film solar cells, which includes geometric engineering of the structure of the solar cell at the micro and nanoscale, plasmonic structures, and more.
[Show full text]
Graphene-Based Composite Thin Films for Electronics
NANO LETTERS 2009 Graphene-based Composite Thin Films Vol. 9, No. 2 for Electronics 814-818 Goki Eda and Manish Chhowalla* Rutgers UniVersity, Materials Science and Engineering, Piscataway, New Jersey 08854 Received November 21, 2008; Revised Manuscript Received January 4, 2009 ABSTRACT The electrical properties of solution-processed composite thin films consisting of functionalized graphene sheets (FGS) as the filler and polystyrene (PS) as the host material are described. We demonstrate that transistors from graphene-based composite thin films exhibit ambipolar field effect characteristics, suggesting transport via percolation among FGS in the insulating PS matrix. Device characteristics as a function of the FGS size are also reported. The results indicate that devices fabricated using the largest size FGS yield the highest mobility values. This simple and scaleable fabrication scheme based on a commodity plastic could be useful for low-cost, macro-scale electronics. Graphene-based composites are emerging as new class of introduction of percolating graphene network within an materials that hold promise for several applications.1 Graphene, insulating material may render it semiconducting. In this a single sheet of graphite, possesses extraordinary electrical, study, we show that incorporation of functionalized graphene thermal, and mechanical properties arising from its unique sheets (FGS) in polystyrene (PS) matrix results in composite structure.2 When incorporated into polymer3-6 or ceramic7 thin films that are semiconducting and exhibit ambipolar field matrices, these properties manifest as remarkable improve- effect. These composites can be deposited uniformly over ments in the host material. Graphene-based polymer com- large areas in the form of thin films from solution onto which posites exhibit extraordinarily low electrical percolation devices can be fabricated without extensive lithography.
[Show full text]
Low-Loss Dielectric Mirror with Ion-Beam-Sputtered Tio2 Œsio2 Mixed Films
View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by National Tsing Hua University Institutional Repository Low-loss dielectric mirror with ion-beam-sputtered TiO2–SiO2 mixed films Shiuh Chao, Wen-Hsiang Wang, and Cheng-Chung Lee Ion-beam-sputtered TiO2–SiO2 mixed films with 17% SiO2 concentration were used as high-refractive- index layers in a multilayered-stack dielectric mirror. Experimental results indicated that total loss of the as-deposited mirror was 34% lower than that of the as-deposited conventional mirrors with pure TiO2 films used as high-refractive-index layers. In addition, annealing reduced total loss of the mirrors. Although decreasing with an increasing annealing temperature, total loss of the conventional mirrors dramatically increased above ϳ200 °C annealing temperature, owing to increased scattering from an amorphous-to-crystalline phase transition in the TiO2 films. In addition, total loss of the mirrors with the mixed films continuously decreased with an increasing annealing temperature up to 400 °C without the phase transition. Total loss was reduced 88% by means of decreasing absorption in the mixed films. Moreover, the annealed mirror with mixed films was better than both the as-deposited mirror and the conventional mirror with pure films in terms of laser-damage resistance. © 2001 Optical Society of America OCIS codes: 310.0310, 310.1620, 310.1860, 310.3840, 310.6860, 310.6870. 1. Introduction Ta2O5 are the conventionally used materials for high- Scattering loss and absorption loss of a dielectric mir- refractive-index thin films. In addition, SiO2 and ror can cause lock in and lock-in growth phenomena in Al2O3 are frequently used as low-refractive-index a ring-laser gyroscope.
[Show full text]
UV Optical Filters and Coatings
UV Optical Filters and Coatings BARR PRECISION OPTICS & THIN FILM COATINGS Materion Barr Precision Optics & Thin Film Coatings is a leading manufacturer and supplier of precision optical filters, hybrid circuits, flexible thin films and custom thin film coating services. We offer coating solutions for manufacturers in the defense, commercial, space, science, astronomy and thermal imaging markets. UltraViolet (UV) Optical Filters and Coatings Materion offers Ultraviolet (UV) optical filters and coatings used Material Options Include: in a wide variety of existing and emerging UV-based applications. n Metal-Dielectric Bandpass Filters, fully blocked from Whether the requirement is for small, prototype UV filter quantity, a the UV to IR “one-of-a-kind” coated optic, or for large-scale volume manufactur- n UVA, UVB Filters - fully blocked ing associated with an OEM application, Materion is equipped to n UV Filter Arrays, Discrete and Patterned meet the need. With Materion’s approach to filter design and manu- n UV Bandpass Filters with high transmission – facture, our filter design engineers work closely with our customers’ made with Environmentally-Durable Oxide Films optical system designers throughout the filter development process. n Mercury-line Isolation Filters such as i-line and g-line Filters The optical filters and coatings that result from this collaborative n AR-Coatings for UV Spectral Range process often serve to optimize the performance characteristics n UV Laser Bandpass Filters of our customers’ instruments and applications. When it comes to filter design and manufacture in the UV spectral range, Materion has n Solderable-metalized coatings developed an extensive library of manufacturing plans for UV filters n Wide UV Passband Filters (such as filters in UVC) and coatings which can be deployed or tailored to produce optical blocked for use with SiC or GaN Detectors filters, that best match customer requirements.
[Show full text]
Research Into Fabrication and Popularization of Organic Thin Film Solar Cells, Chemical Engineering Transactions, 55, 25-30 DOI:10.3303/CET1655005 26
25 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 55, 2016 The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Tichun Wang, Hongyang Zhang, Lei Tian Copyright © 2016, AIDIC Servizi S.r.l., ISBN 978-88-95608-46-4; ISSN 2283-9216 DOI: 10.3303/CET1655005 Research into Fabrication and Popularization of Organic Thin Film Solar Cells Bin Zhang*a, Yan Lia, Shanlin Qiaob, Le Lic, Zhanwen Wanga a Hebei Chemical & Pharmaceutical College, No. 88 Fangxing Road, Shijiazhuang, Hebei Province, China; b Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, No. 189 Songling Road, Qingdao, Shandong Province, China c Shijiazhuang Naienph Chemical Technology Co., Ltd, No. 12 Shifang Road, Shijiazhuang, Hebei Province, China. [email protected] An analysis was conducted herein on the research status of several popular solar cells at the present stage, including silicon solar cell, thin film photovoltaic cell, and dye-sensitized solar cell (DSSC). In doing so, we concluded that the current situations provide a favorable objective environment for the popularization of organic thin film solar cells. Finally, we reviewed the merits and demerits of the organic thin film solar cell together with the major research focus on and progress of it, and summarized obstacles to and development trails of the popularization of organic thin film solar cells. 1. Introduction As the energy crisis further deepens in the 21st century, the existing development level for solar cells has already failed to satisfy increasing social demands for energy. This phenomenon is mainly reflected in the costly high-purity silicon solar panels, in the defects at new amorphous silicon (a-Si) during energy conversion, and in the limited theoretical energy conversion efficiency (around 25%) of silicon solar panels as well.
[Show full text]
Reflectance in Thin Films
TECHNICAL PAPER Reflectance in Thin Films Abstract Reflectance (R) is the fraction of incident light reflected from a surface and is an intrinsic optical property of thin films. It is essential in determining color, transparency and polarization characteristics of the film. Total internal reflectance is also important in devices such as optical waveguides. Reflectance depends on the energy band structure and associated plasma frequency of charge carriers. As a result, high reflection spectral regions are different for metals, semiconductors and insulators. Basic relations that determine reflectance will be presented and related to refractive index, extinction coefficient, color and transparency of these three classes of thin film materials. Reflectance of thin films also depends on thickness and surface quality. In addition to spectral dependence, the color associated with reflectance can also be described by Tristimulus values and Chromaticity diagrams. Antireflection and high reflection multilayer thin film coatings will also be addressed. Introduction The reflectivity or reflectance (R), of a surface is an intrinsic optical property of a surface. In many optical, electrooptic, telecommunications, solar concentrator and architectural applications, reflectance must either be controlled (reduced or enhanced), or the color of the object changed (e.g., given a “gold” color). For example, heat mirrors are used to reflect infrared wavelengths to reduce heat loss or ingress through windows. Infrared reflectance must be maximized while keeping visible light transmission through the window high. Multilayer low-e and solar control coatings are used to achieve this performance but must be applied to low cost plastic films and glazings. Combined with absorption, reflectance determines color and intensity (or energy) of reflected light.
[Show full text]
Optical Article Having a Conductive Anti-Reflection Coating
Europaisches Patentamt 0101033 J European Patent Office Publication number: B1 Office europeen des brevets EUROPEAN PATENT SPECIFICATION 08.11.89 Intel.4: G 02 B 1/10 Date of publication of patent specification: Application number: 83107752.4 Date of filing: 05.08.83 Optical article having a conductive anti-reflection coating. (§) Priority: 09.08.82 US 406302 Proprietor: OPTICAL COA1COATING LABORATORY, INC. 2789 Northpoint Parkway Date of publication of application: Santa Rosa, CA 95401 (US) 22.02.84 Bulletin 84/08 Inventor: Hahn, Robert E. Publication of the grant of the patent: 1657EICaminoWay 08.1 1.89 Bulletin 89/45 Santa Rosa California 95404 (US) Inventor: Jones, Thomas R. 2139 Saint John Court Designated Contracting States: Santa Rosa California 95401 (US) AT BE CH DE FR GB IT LI LU NL SE Inventor: Berning, Peter H. 1287 Bingtree Way Sebastopol California 95472 (US) References cited: BE-A- 560 087 DE-A-968248 Representative: von Fiiner, Alexander, Dr. et al US-A-2852415 Patentanwalte v. Fiiner, Ebbinghaus, Finck US-A-3 679 291 Mariahilfplatz2&3 CO US-A-3914516 D-8000 Miinchen 90 (DE) US-A-4313 647 vol. 7, 1974, CO APPLIED OPTICS, 13, no. July cited: New York, US; H. DUPOISOT References CO pages 1605-1609, GLASTECHNISCHE BERICHTE, vol. 53, 9, al.: lumiere interferentiels a larges no. o et "Pieges a 245-258, Frankfurt am Main, DE; bandes azimuthale et spectrale" 1980, pages H.J. GLASER: "Verfahren zur Beschichtung von 5 Fensterscheiben mit Sonnen- und Warmeschutzschichten" months from the publication of the mention of the grant of the European patent, any person may o Note- Within nine shall notice to the European Patent Office of opposition to the European patent granted.
[Show full text]
Antireflective Coatings
materials Review Antireflective Coatings: Conventional Stacking Layers and Ultrathin Plasmonic Metasurfaces, A Mini-Review Mehdi Keshavarz Hedayati 1,* and Mady Elbahri 1,2,3,* 1 Nanochemistry and Nanoengineering, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-Universität zu Kiel, Kiel 24143, Germany 2 Nanochemistry and Nanoengineering, Helmholtz-Zentrum Geesthacht, Geesthacht 21502, Germany 3 Nanochemistry and Nanoengineering, School of Chemical Technology, Aalto University, Kemistintie 1, Aalto 00076, Finland * Correspondence: [email protected] (M.K.H.); mady.elbahri@aalto.fi (M.E.); Tel.: +49-431-880-6148 (M.K.H.); +49-431-880-6230 (M.E.) Academic Editor: Lioz Etgar Received: 2 May 2016; Accepted: 15 June 2016; Published: 21 June 2016 Abstract: Reduction of unwanted light reflection from a surface of a substance is very essential for improvement of the performance of optical and photonic devices. Antireflective coatings (ARCs) made of single or stacking layers of dielectrics, nano/microstructures or a mixture of both are the conventional design geometry for suppression of reflection. Recent progress in theoretical nanophotonics and nanofabrication has enabled more flexibility in design and fabrication of miniaturized coatings which has in turn advanced the field of ARCs considerably. In particular, the emergence of plasmonic and metasurfaces allows for the realization of broadband and angular-insensitive ARC coatings at an order of magnitude thinner than the operational wavelengths. In this review, a short overview of the development of ARCs, with particular attention paid to the state-of-the-art plasmonic- and metasurface-based antireflective surfaces, is presented. Keywords: antireflective coating; plasmonic metasurface; absorbing antireflective coating; antireflection 1.
[Show full text]