OWNER’S MANUAL Blu-ray Disc™/DVD Player

Please read this manual carefully before operating your set and retain it for future reference.

BP125

P/NO : MFL67475812_2.0

Getting Started 3

Safety Information

CAUTION Use of controls, adjustments or the performance of RISK OF ELECTRIC SHOCK 1 DO NOT OPEN procedures other than those specified herein may Getting Started result in hazardous radiation exposure. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING CAUTION concerning the Power Cord TO QUALIFIED SERVICE PERSONNEL. Most appliances recommend they be placed upon a dedicated circuit; This lightning flash with arrowhead symbol within That is, a single outlet circuit which powers only an equilateral triangle is intended to alert the user that appliance and has no additional outlets or to the presence of uninsulated dangerous voltage branch circuits. Check the specification page of this within the product’s enclosure that may be of owner’s manual to be certain. Do not overload wall sufficient magnitude to constitute a risk of electric outlets. Overloaded wall outlets, loose or damaged shock to persons. wall outlets, extension cords, frayed power cords, or The exclamation point within an equilateral triangle damaged or cracked wire insulation are dangerous. is intended to alert the user to the presence of Any of these conditions could result in electric important operating and maintenance (servicing) shock or fire. Periodically examine the cord of your instructions in the literature accompanying the appliance, and if its appearance indicates damage product. or deterioration, unplug it, discontinue use of the WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK appliance, and have the cord replaced with an HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN exact replacement part by an authorized service OR MOISTURE. centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, CAUTION: The apparatus shall not be exposed to pinched, closed in a door, or walked upon. Pay water (dripping or splashing) and no objects filled particular attention to plugs, wall outlets, and with liquids, such as vases, shall be placed on the the point where the cord exits the appliance. To apparatus. disconnect power from the mains, pull out the WARNING: Do not install this equipment in a mains cord plug. When installing the product, confined space such as a book case or similar unit. ensure that the plug is easily accessible. CAUTION: Do not block any ventilation openings. NOTICE: For safety marking information including Install in accordance with the manufacturer’s product identification and supply ratings, please instructions. refer to the main label on the bottom or rear of the Slots and openings in the cabinet are provided for apparatus. ventilation and to ensure reliable operation of the CAUTION: Only use the AC adapter supplied product and to protect it from over heating. The with this device. Do not use a power supply from openings shall be never be blocked by placing another device or another manufacturer. Using the product on a bed, sofa, rug or other similar any other power cable or power supply may cause surface. This product shall not be placed in a built- damage to the device and void your warranty. in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. 4 Getting Started

This device is equipped with a portable battery or accumulator. yy The appliance is not intended for use by Safety way to remove the battery or the young children or infirm persons without battery from the equipment: Remove the supervision. 1 old battery or battery pack, follow the steps yy Young Children should be supervised to

Getting Started in reverse order than the assembly. To prevent ensure that they do not play with appliance. contamination of the environment and bring on yy If the appliance is supplied from a cord possible threat to human and animal health, the extension set or an electrical portable outlet old battery or the battery put it in the appropriate device, the cord extension set on electrical container at designated collection points. Do portable outlet device must be positioned not dispose of batteries or battery together with so that it is not subject to splashing or other waste. It is recommended that you use ingress of moisture. local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Getting Started 5

Notes on Copyrights Important Notice for TV colour yy Because AACS (Advanced Access Content system System) is approved as content protection The colour system of this player differs according to system for Blu-ray Disc format, similar to use of currently playing discs. CSS () for DVD format, 1

For example, when the player plays the disc Getting Started certain restrictions are imposed on playback, recorded in the NTSC colour system, the image is analog signal output, etc., of AACS protected output as an NTSC signal. contents. The operation of this product and restrictions on this product may vary depending Only the multi system colour TV can receive all on your time of purchase as those restrictions signals output from the player. may be adopted and/or changed by AACS after yy If you have a PAL colour system TV, you will see the production of this product. just distorted images when using discs or video yy Furthermore, BD-ROM Mark and BD+ are contents recorded in NTSC. additionally used as content protection systems yy The multi system colour TV changes the colour for Blu-ray Disc format, which imposes certain system automatically according to input signals. restrictions including playback restrictions for In case that the colour system is not changed BD-ROM Mark and/or BD+ protected contents. automatically, turn it off and then on to see To obtain additional information on AACS, BD- normal images on screen. ROM Mark, BD+, or this product, please contact yy Even if the disc recorded in NTSC colour system an authorized Customer Service Centre. are well displayed on your TV, these may not be yy Many BD-ROM/DVD discs are encoded with recorded correctly on your recorder. copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs. yy This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited. yy Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of programs, videotapes, BD-ROM discs, , CDs and other materials may subject you to civil and/ or criminal liability. 6 Table of Contents

Table of Contents 3 System Setting 21 Settings 21 – Initial Setup 21 – Adjust the Setup Settings 1 Getting Started 22 – [DISPLAY] Menu 3 Safety Information 23 – [LANGUAGE] Menu 8 Introduction 24 – [AUDIO] Menu 8 – Playable Discs and symbols used in 25 – [LOCK] Menu this manual 26 – [OTHERS] Menu 9 – About the “7” Symbol Display 9 – Compatibility Notes 4 Operating 10 – File requirement 11 – AVCHD (Advanced Video Codec High 27 General Playback Definition) 27 – Using [HOME] menu 12 – Certain System Requirements 27 – Playing a Disc 12 – Regional Code 27 – Playing a file on disc/USB device 12 – System Select 28 – Basic operations for video and audio 13 content 14 Front panel 28 – Basic operations for photo content 14 Rear panel 28 – Using the disc menu 29 – Resume playback 29 – Last Scene Memory 2 Connecting 29 Advanced Playback 15 Connecting the AC Adapter 29 – Repeat Playback 15 Connecting to Your TV 30 – Repeating a specific portion 16 – What is SIMPLINK? 30 – Viewing content information 17 – Resolution Setting 30 – Changing content list view 18 Connecting to an Amplifier 31 – Selecting a subtitle file 18 – Connecting to an Amplifier via HDMI 31 – Options while viewing a photo Output 32 – Listening to music while slide show 19 – Connecting to an Amplifier via Digital 32 On-Screen display Audio Output 32 – Displaying content information on- 19 USB device connection screen 19 – Playback content in the USB device 33 – Playing from selected time 33 – Selecting a subtitle language 34 – Hearing a different audio 34 – Watching from a different angle 34 – Changing the TV Aspect Ratio 35 – Changing subtitle code page 35 – Changing the Picture Mode 36 Audio CD recording Table of Contents 7

5 Troubleshooting 37 Troubleshooting 37 – General 38 – Picture 1 38 – Customer Support 38 – Open source software notice

6 Appendix 2 39 Controlling a TV with the Supplied Remote Control 39 – Setting up the remote to control your TV 40 Area Code List 3 41 Language code List 42 Trademarks and Licenses 44 Audio Output Specifications 46 Specifications 47 Maintenance 4 47 – Handling the Unit 47 – Notes on Discs

5

6 8 Getting Started

Introduction

1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol Description yy Discs such as movies that can be purchased or e rented. yy BD-R/RE discs that are recorded in BDAV format. Blu-ray y yy BD-R/RE discs that contain Movie, Music or Photo files. u yy ISO 9660+JOLIET, UDF and UDF Bridge format i yy Discs such as movies that can be purchased or rented. r yy Movie mode and finalized only DVD-ROM yy Supports the dual layer disc also DVD-R DVD-RW o Finalized AVCHD format DVD+R DVD+RW y yy DVD±R/RW discs that contain Movie, Music or (8 cm, 12 cm) Photo files. u yy ISO 9660+JOLIET, UDF and UDF Bridge format i

DVD-RW (VR) VR mode and finalized only r (8 cm, 12 cm) Audio CD Audio CD t (8 cm, 12 cm) y yy CD-R/RW discs that contain Movie, Music or CD-R/RW Photo files. (8 cm, 12 cm) u yy ISO 9660+JOLIET, UDF and UDF Bridge format i Note – , Indicates special notes and operating features. Indicates cautions for preventing possible Caution – > damages from abuse. Getting Started 9

,,Note About the “7” Symbol Display yy Depending on the conditions of the recording equipment or the CD-R/RW (or “7” may appear on your TV display during DVD±R/RW) disc itself, some CD-R/RW (or operation and indicates that the function explained DVD±R/RW) discs cannot be played on the in this owner’s manual is not available on that specific media. 1

unit. Getting Started yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, Compatibility Notes DVD±R/RW, BD-R/RE) may not be playable. yy Because BD-ROM is a new format, certain disc, yy BD-R/RE, DVD±R/RW and CD-R/RW discs digital connection and other compatibility issues recorded using a personal or a are possible. If you experience compatibility DVD or CD Recorder may not play if the problems, please contact an authorized disc is damaged or dirty, or if there is dirt or Customer Service Center. condensation on the player’s lens. yy This unit allows you to enjoy functions such yy If you record a disc using a personal as picture-in-picture, secondary audio and computer, even if it is recorded in a Virtual packages, etc., with BD-ROM supporting compatible format, there are cases in which BONUSVIEW (BD-ROM version 2 Profile 1 version it may not play because of the settings of 1.1). Secondary video and audio can be played the application software used to create the from a disc compatible with the picture-in- disc. (Check with the software publisher for picture function. For the playback method, refer more detailed information.) to the instructions in the disc. yy This player requires discs and recordings to yy Viewing high-definition content and up- meet certain technical standards in order to converting DVD content may require a achieve optimal playback quality. HDMI-capable input or HDCP-capable DVI input yy Pre-recorded DVDs are automatically set to on your display device. these standards. There are many different yy Some BD-ROM and DVD discs may restrict the types of recordable disc formats (including use of some operation commands or features. CD-R containing MP3 or WMA files) and yy Dolby TrueHD, Plus and DTS-HD are these require certain pre-existing conditions supported with maximum 7.1 channels if you to ensure compatible playback. use HDMI connection for the audio output of the yy Customers should note that permission unit. is required in order to download MP3 / yy You can use a USB device to store some disc WMA files and music from the Internet. related information. The disc you are using will Our company has no right to grant such control how long this information is retained. permission. Permission should always be sought from the copyright owner. yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for ) 10 Getting Started

File requirement

Movie files 1

Getting Started File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback AAC, WMA MicroDVD (.sub/.txt), VobSub Disc, “.asf”, “.wmv”, only), , MPEG1 SS, (.sub), SubViewer 1.0 (.sub), USB “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer 2.0 (.sub/.txt), TMPlayer free), “.”, MPEG2 PS, MPEG2 TS, (.txt), DVD Subtitle System (.txt) “.3gp”, “.flv” VC-1 SM (WMV3)

Music files

File File Sampling Frequency Bitrate Note Location Extension “.”, “.wav”, within 32 - 48 kHz within 32 - 192 Some wav files are Disc, “.wma”, “.m4a” (WMA), within 16 - 48 kbps (WMA), within not supported on this USB (DRM free), kHz (MP3) 32 - 320 kbps (MP3) player. “.flac”

Photo files

File File Recommended Note Location Extension Size “.jpg”, “.jpeg”, Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless Disc, “.png”, “.gif” Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files USB are not supported. Getting Started 11

,,Note ,,Note yy The file name is limited to 180 characters. yy A “avi” file which is encoded “WMV 9 codec” yy Maximum files/Folder: Less than 2000 (total is not supported. number of files and folders) yy This player supports UTF-8 files even it yy Depending on the size and number of the contains Unicode subtitle contents. This 1 files, it may take several minutes to read the player can not support the pure Unicode Getting Started contents on the media. subtitle files. yy The file requirements on page 10 are not yy Depending on the types of file or ways of always compatible. There may have some recording, it may not play back. restrictions by file features. yy A disc which was recorded by multi-session yy This unit cannot support the ID3 Tag on normal PC is not supported on this embedded MP3 file. player. yy The total playback time of audio file yy To be playback a movie file, movie file name indicated on the screen may not correct for and Subtitle file name must be the same. VBR files. yy If video codec is MPEG2 TS or MPEG2 PS, yy HD movie files contained on the CD or USB subtitle does not play back. 1.0/1.1 may not played properly. Blu-ray Disc, DVD or USB 2.0 are recommended to play back HD movie files. AVCHD (Advanced Video yy This player supports H.264/MPEG-4 AVC Codec High Definition) profile Main, High at Level 4.1. For a file with higher level, the warning message will yy This player can playback AVCHD format discs. appear on the screen. These discs are normally recorded and used in . yy This player does not support files that are recorded with GMC*1 or Qpel*2. yy The AVCHD format is a high definition digital video camera format. *1 GMC – Global Motion Compensation yy The MPEG-4 AVC/H.264 format is capable of *2 Qpel – Quarter pixel compressing images at higher efficiency than that of the conventional image compressing format. yy This player can playback AVCHD discs using “x.v.Colour” format. yy Some AVCHD format discs may not play depending on the recording condition. yy AVCHD format discs need to be finalized. yy “x.v.Colour” offers a wider colour range than normal DVD discs. 12 Getting Started

Certain System Requirements Regional Code For high definition video playback: This unit has a regional code printed on the rear of yy High definition display that has HDMI input jack. the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”. 1 yy BD-ROM disc with high definition content. Getting Started yy HDMI or HDCP capable DVI input on your display device is required for some content (as specified System Select by disc authors). Open the disc tray using the B (OPEN/CLOSE) For Dolby® Digital Plus, Dolby TrueHD and DTS-HD button and then, press and hold M (PAUSE) for multi-channel audio playback: more than five seconds to change the color system (PAL /NTSC /AUTO). yy An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder. yy Main, center, surround speakers and subwoofer as necessary for chosen format. Getting Started 13

Remote control

• • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player REPEAT (h): Repeats a desired 1

ON or OFF. section or sequence. Getting Started B (OPEN/CLOSE): Opens and AUDIO ([): Selects an audio closes the disc tray. language. 0-9 numerical buttons: Selects SUBTITLE (]): Selects a subtitle numbered options in a menu. language. CLEAR: Removes a number when TITLE/POP-UP: Displays the DVD setting the password. title menu or BD-ROM’s pop-up TV Control Buttons: See page menu, if available. 39. Colored (R, G, Y, B) buttons: Use to navigate BD-ROM menus. They • • • • • • b • • • • • are also used for [MOVIE], [PHOTO] c/v (SCAN): Searches and [MUSIC] menu. backward or forward. C/V (SKIP): Goes to the next or previous chapter / track / file. M (PAUSE): Pauses playback. z (PLAY): Starts playback. Z (STOP): Stops playback. • • • • • • c • • • • • HOME (n): Displays or exits the Battery Installation [Home Menu]. INFO/MENU (m): Displays or exits On-Screen Display. Direction buttons: Selects an option in the menu. ENTER (b): Acknowledges menu Remove the battery cover on the selection. rear of the Remote Control, and BACK (1): Exits the menu or insert theR03 (size AAA) battery resumes playback. The resume with 4 and 5 matched correctly. play function may not work depending on the BD-ROM disc. DISC MENU: Accesses menu on a disc. 14 Getting Started

Front panel

1 Getting Started

a Disc Tray d B (OPEN / CLOSE) b Power indicator e 1 (POWER) c Remote Sensor f USB Port

Rear panel

a DC IN 12V (AC adapter input) c DIGITAL AUDIO OUT (COAXIAL) b HDMI OUT Connecting 15

Connecting the AC Connecting to Your TV

Adapter If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Connect the unit to the power supply with the Speed HDMI™ Cable). Connect the HDMI jack on supplied AC Adapter. the player to the HDMI jack on a HDMI compatible Rear of the unit TV or monitor. Rear of the unit 2 Connecting

HDMI cable

TV

Plug into a power source. yy Contact an electrical parts distributor for assistance in selecting a suitable AC plug adapter or AC cord set. Set the TV’s source to HDMI (refer to TV’s Owner’s yy This AC adapter is manufactured by APD Group manual). Yang Ming Industrial. Caution ,,Note >> Please refer to the manuals of your TV, Stereo Only use the AC adapter supplied with this System or other devices as necessary to make device. Do not use a power supply from the best connections. another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. 16 Connecting

Additional Information for HDMI What is SIMPLINK? yy When you connect a HDMI or DVI compatible device make sure of the following: -- Try switching off the HDMI/DVI device and Some functions of this unit are controlled by the this player. Next, switch on the HDMI/DVI TV’s remote control when this unit and LG TV’s with device and leave it for around 30 seconds, SIMPLINK are connected through HDMI connection. then switch on this player. Controllable functions by LG TV’s remote control; -- The connected device’s video input is set Play, Pause, Scan, Skip, Stop, Power Off, etc. 2 correctly for this unit. Refer to the TV owner’s manual for the details of

Connecting -- The connected device is compatible with SIMPLINK function. 720x576p, 1280x720p, 1920x1080i or LG TV’s with SIMPLINK function has the logo as 1920x1080p video input. shown above. yy Not all HDCP-compatible HDMI or DVI devices Note will work with this player. ,, Depending on the disc type or playing status, -- The picture will not be displayed properly some SIMPLINK operation may differ from your with non-HDCP device. purpose or not work. ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17) yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 23). yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. yy When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. yy If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m). Connecting 17

Resolution Setting ,,Note yy If your TV does not accept the resolution The player provides several output resolutions for you have set on the player, you can set HDMI OUT jack. You can change the resolution resolution to 576p as follows: using [Setup] menu. 1. Press B to open the disc tray. 1. Press HOME (n). 2. Press Z (STOP) for more than 5 seconds. 2. Use a/d to select the [Setup] and press ENTER (b). The [Setup] menu appears. yy When you set the resolution to 576i with HDMI connection, actual resolution is 3. Use w/s to select [DISPLAY] option then press outputted to 576p. d to move to the second level. yy If you select a resolution manually and then 2 4. Use w/s to select the [Resolution] option then connect the HDMI jack to TV and your TV Connecting press ENTER (b) to move to the third level. does not accept it, the resolution setting is set to [Auto]. yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous 5. Use w/s to select the desired resolution then resolution. press ENTER (b) to confirm your selection. yy The video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. 18 Connecting

Connecting to an Connecting to an Amplifier via HDMI Output Amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Make one of the following connections, depending HDMI cable. on the capabilities of your existing equipment. yy HDMI Audio connection (page 18) Rear of the unit yy Digital Audio connection (page 19) 2 Since many factors affect the type of audio output,

Connecting see “Audio Output Specifications” for details (pages 44).

About Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this, you need a multi- channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ HDMI cable Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)

Receiver/Amplifier

HDMI cable

TV

Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplifier has HDMI output jack. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 24) Connecting 19

Connecting to an Amplifier via USB device connection Digital Audio Output Connect the player’s COAXIAL OUT jack to the This player can play movie, music and photo files corresponding in jack on your amplifier using an contained in the USB device. optional digital audio cable.

Rear of the unit Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. 2 Connecting

Coaxial cable

When you connect the USB device on the HOME menu, the player plays a music file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear. File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading. Receiver/Amplifier 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using a/d, You will need to activate the player’s digital output. and press ENTER (b). (See “[AUDIO] Menu” on pages 24.) 4. Select the [USB] option using w/s, and press ENTER (b).

5. Select a file using w/s/a/d, and press PLAY or ENTER (b) to play the file. 6. Withdraw the USB device carefully. 20 Connecting

,,Note yy This player supports USB flash drive/ external HDD formatted in FAT32 and NTFS when accessing files (music, photo, movie). However, for Blu-ray contents, only FAT32 format is supported. Use the USB flash drive/ external HDD formatted in either FAT32 or NTFS when enjoying Blu-ray contents. yy This unit can support up to 4 partitions of 2 the USB device.

Connecting yy Do not extract the USB device during operation (play, etc.). yy A USB device which requires additional program installation when you have connected it to a computer, is not supported. yy USB device: USB device that supports USB1.1 and USB2.0. yy Movie, music and photo files can be played. For details of operations on each file, refer to relevant pages. yy Regular back up is recommended to prevent data loss. yy If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. yy Some USB device may not work with this unit. yy Digital camera and mobile phone are not supported. yy USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. System Setting 21

Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. Initial Setup 1. Press HOME (n). When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use w/s/a/d to select a display language 2. Use a/d to select the [Setup] and press ENTER and press ENTER (b). (b). The [Setup] menu appears.

3 System Setting

3. Check the setting that you have set in the 3. Use w/s to select the first setup option, and previous step. press d to move to the second level.

Press ENTER (b) while [Finish] is highlighted 4. Use w/s to select a second setup option, and to finish the initial setup settings. If there is any press ENTER (b) to move to the third level. settings to be changed, use a/d to select [Previous] and press ENTER (b).

5. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. 22 System Setting

[DISPLAY] Menu Resolution Sets the output resolution of the HDMI video signal. TV Aspect Ratio Refer to page 17 for details about the resolution Select a TV aspect ratio option according to your TV setting. type. [Auto] [4:3 Letter Box] If the HDMI OUT jack is connected to Select when a standard 4:3 TV is connected. TVs providing display information (EDID), Displays theatrical images with masking bars automatically selects the resolution best suited above and below the picture. to the connected TV. [4:3 Pan Scan] [1080p] Select when a standard 4:3 TV is connected. Outputs 1080 lines of progressive video. Displays pictures cropped to fill your TV screen. [] Both sides of the picture are cut off. 3 Outputs 1080 lines of .

System Setting [16:9 Original] [] Select when a 16:9 wide TV is connected. The Outputs 720 lines of progressive video. 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the [576p] left and right sides. Outputs 576 lines of progressive video. [16:9 Full] [576i] Select when a 16:9 wide TV is connected. The Outputs 576 lines of interlaced video. 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. 1080p Display Mode Note ,, When the resolution is set to 1080p, select You cannot select [4:3 Letter Box] and [24 Hz] for smooth presentation of film material [4:3 Pan Scan] option when the resolution is (1080p/24 Hz) with a HDMI-equipped display set to higher than 720p. compatible with 1080p/24 Hz input. ,,Note yy When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50 Hz]. yy Even when [1080p Display Mode] is set to [24 Hz], if your TV is not compatible with 1080p/24 Hz, the actual frame frequency of the video output will be 50 Hz to match the video source format. System Setting 23

HDMI Color Setting [LANGUAGE] Menu Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your Display Menu display device. Select a language for the [Setup] menu and on- screen display. [YCbCr] Select when connecting to a HDMI display Disc Menu/Disc Audio/ device. Disc Subtitle [RGB] Select the language you prefer for the audio track Select when connecting to a DVI display (disc audio), subtitles, and the disc menu. device. [Original] Home Menu Guide Refers to the original language in which the disc was recorded. This function allows you to display or delete the 3

guide bubble on the Home Menu. Set this option [Other] System Setting to [On] for displaying guide. Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 41. [Off] (Disc Subtitle only) Turn off Subtitle. ,,Note Depending on the disc, your language setting may not work. 24 System Setting

[AUDIO] Menu Sampling Freq. Each disc has a variety of audio output options. Set (Digital Audio Output) the player’s Audio options according to the type of [48 kHz] audio system you use. Select this if your A/V Receiver or Amplifier is ,,Note not capable of handling 192 kHz and 96 kHz Since many factors affect the type of audio signal. When this choice is made, this unit output, see “Audio Output Specifications” on automatically converts any 192 kHz and 96 kHz page 44 for details. signals to 48 kHz so your system can decode them. Digital Output [96 kHz] Select this if your A/V Receiver or Amplifier is [PCM Stereo] (HDMI, COAXIAL) not capable of handling 192 kHz signals. When Select if you connect this unit’s HDMI OUT this choice is made, this unit 3 or COAXIAL OUT jack to a device with two- automatically converts any 192 kHz signals to

System Setting channel digital stereo decoder. 96 kHz so your system can decode them. [PCM Multi-Ch] (HDMI only) [192 kHz] Select if you connect this unit’s HDMI OUT jack Select this if your A/V Receiver or Amplifier is to a device with multi-channel digital decoder. capable of handling 192 kHz signals. [DTS Re-Encode] (HDMI, COAXIAL) Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. Select if you connect this unit’s HDMI OUT or COAXIAL OUT jack to a device with DTS decoder. DRC (Dynamic Range Control) This function allows you to listen to a movie at a [BitStream] (HDMI, COAXIAL) lower volume without losing clarity of sound. Select if you connect this unit’s COAXIAL OUT and HDMI OUT jack to a device with LPCM, [Auto] Dolby Digital, Dolby Digital Plus, Dolby TrueHD, The dynamic range of the Dolby TrueHD audio DTS and DTS-HD decoder. output is specified by itself. And the dynamic range of the Dolby Digital ,,Note and Dolby Digital Plus are operated as same as yy When [Digital Output] option is set to [PCM the [On] mode. Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is [On] not detected from HDMI device with EDID. Compress the dynamic range of the Dolby yy If the [Digital Output] option is set to [DTS Digital, Dolby Digital Plus or Dolby TrueHD Re-Encode], the DTS Re-Encode audio is audio output. outputted for BD-ROM discs with secondary [Off] audio and the original audio is outputted for the other discs (like [BitStream]). Turns off this function. ,,Note The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. System Setting 25

[LOCK] Menu DVD Rating The [LOCK] settings affect only BD-ROM and DVD Blocks playback of rated DVD based on their playback. content. (Not all discs are rated.) To access the any features in [LOCK] settings, you [Unlock] must enter the 4-digit security code you have created. If you select [Unlock], parental control is not If you have not entered a password yet, you are active and the disc plays in full. prompted to do so. Enter a 4-digit password twice, [Rating 1-8] and press ENTER (b) to create a new password. Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Password You can create or change the password. Blu-ray Disc Rating [None] Set an age limit of BD-ROM play. Use number Enter a 4-digit password twice, and press buttons to input an age limit for BD-ROM viewing. 3

ENTER ( ) to create a new password. System Setting b [255] [Change] All BD-ROM can be played. Enter the current password and press ENTER [0-254] (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password. Prohibits play of BD-ROM with corresponding ratings recorded on them. If you forget your password If you forget your password, you can clear it using ,,Note the following steps: The [Blu-ray Disc Rating] will be applied only for the Blu-ray disc that containing the 1. Remove any disc that might be in the player. Advanced Rating Control. 2. Select [Password] option in the [Setup] menu. 3. Use Number buttons to enter “210499”. The password is cleared. Area Code ,,Note Enter the code of the area whose standards were If you make a mistake before pressing ENTER used to rate the DVD video disc, based on the list on page 40. (b), press CLEAR. Then input the correct password. 26 System Setting

[OTHERS] Menu Auto Power Off The screen saver appears when you leave the DivX® VOD player in Stop mode for about five minutes. If ABOUT DIVX VIDEO: DivX® is a digital video you set this option to [On], the unit automatically format created by DivX, LLC, a subsidiary of Rovi turns off within 20 minutes since the Screen Saver Corporation. This is an official DivX Certified® device is displayed. Set this option to [Off] to leave the that plays DivX video. Visit divx.com for more screen saver until the unit is operated by the user. information and software tools to convert your files into DivX videos. Initialize ABOUT DIVX VIDEO-ON-DEMAND: This DivX [Factory Set] Certified® device must be registered in order to play You can reset the player to its original factory purchased DivX Video-on-Demand (VOD) movies. settings. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. [Blu-ray Storage Clear] divx.com for more information on how to complete 3 Initializes the Blu-ray contents from the

System Setting your registration. connected USB storage. [Register] Displays the registration code of your player. Software [Deregister] [Information] Deactivate your player and display the Displays the current software version. deactivation code. ,,Note All the downloaded videos from DivX(R) VOD with this player’s registration code can only be played on this unit. 4 Operating

Operating 27

General Playback Playing a Disc erto 1. Press B (OPEN/CLOSE), and place a disc on the Using [HOME] menu disc tray. The home menu appears when you press HOME 2. Press B (OPEN/CLOSE) to close the disc tray. ( ). Use to select a category and press n a/d For the most Audio CD, BD-ROM and ENTER ( ). b DVD-ROM discs, playback starts automatically. 3. Press HOME (n). 4. Select [Movie] or [Music] using a/d, and press ENTER (b). 5. Select [Blu-ray Disc], [DVD], [VR] or [Audio] option using w/s, and press ENTER (b). ,,Note yy Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors. yy Depending on the BD-ROM titles, a USB 4

device connection may be needed for the Operating a [Movie] - Plays video contents. proper playback. b [Photo] - Plays photo contents. yy Unfinalized DVD-VR format discs may not c [Music] - Plays audio contents. be played in this player. d [Setup] - Adjusts the system settings. yy Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.

Playing a file on disc/USB device yui This player can play movie, music and photo files contained in the disc or USB device. 1. Insert a data disc on the tray or connect a USB device. 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using a/d, and press ENTER (b). 4. Select [Data] or [USB] option using w/s, and press ENTER (b). 5. Select a file using w/s/a/d, and press z (PLAY) or ENTER (b) to play the file. 28 Operating

Basic operations for video and Basic operations for photo audio content content

To stop playback To play a slide show Press Z (STOP) while playback. Press z (PLAY) to start slide show. To pause playback To stop a slide show Press M (PAUSE) while playback. Press Z (STOP) while slide show. Press z (PLAY) to resume playback. To pause a slide show To play frame-by-frame (Video) Press M (PAUSE) while slide show. Press M (PAUSE) while movie playback. Press z (PLAY) to re-start the slide show. Press M (PAUSE) repeatedly to play Frame-by-Frame playback. To skip to the next/previous photo While viewing a photo in full screen, press a or d To scan forward or backward to go to the previous or next photo. Press c or v to play fast forward or fast reverse during playback. Using the disc menu 4 You can change the various playback speeds by

Operating pressing c or v repeatedly. ero

To slow down the playing speed To display the disc menu While the playback is paused, press v repeatedly The menu screen may be displayed first after to play various speeds of slow motion. loading a disc which contains a menu. If you want to display the disc menu while playback, press DISC To skip to the next/previous MENU. chapter/track/file Use w/s/a/d buttons to navigate through During playback, press C or V to go to the menu items. next chapter/track/file or to return to the beginning of the current chapter/track/file. To display the Pop-up menu Press C twice briefly to step back to the previous Some BD-ROM discs contain Pop-up menu that chapter/track/file. appears while playback. Press TITLE/POP-UP while playback, and use w/s/ a/d buttons to navigate through menu items. Operating 29

Resume playback Advanced Playback eroyt u Repeat Playback The unit records the point where you pressed the Z (STOP) depending on the disc. erotu If “MZ (Resume Stop)” appears on the screen briefly, pressz (PLAY) to resume playback (from y the scene point). During playback, press REPEAT (h) repeatedly to If you press Z (STOP) twice or unload the disc, select a desired repeat mode. “Z(Complete Stop)” appears on the screen. The unit Blu-ray Disc / DVD / Movie files will clear the stopped point. jA- – Selected portion will be repeated continually. ,,Note (Press ENTER (b) at the desired ending point.) yy The resume point may be cleared when a jChapter – The current chapter will be played button is pressed (for example; 1 (POWER), back repeatedly. B (OPEN/CLOSE), etc). jTitle – The current title will be played back yy On BD-ROM discs with BD-J, the resume repeatedly. playback function does not work. jAll – All the tracks or files will be played back yy If you press Z (STOP) once during BD-ROM repeatedly. interactive title playback, the unit will be in 4

Complete Stop mode. Operating To return to normal playback, press REPEAT (h) repeatedly to select [Off]. Last Scene Memory Audio CDs/Music files ;Track – The current track or file will be played er back repeatedly. This unit memorizes the last scene from the last disc :All – All the tracks or files will be played back that is viewed. The last scene remains in memory repeatedly. even if you remove the disc from the unit or switch l – The tracks or files will be played back in off the unit. If you load a disc that has the scene random order. memorized, the scene is automatically recalled. l:All – All the tracks or files will be played ,,Note back repeatedly in random order. yy Last Scene Memory function for a previous kA-B – Selected portion will be repeated disc is erased once a different disc is played. continually. (Audio CD only) yy This function may not work depending on the disc. To return to normal playback, press CLEAR. yy On BD-ROM discs with BD-J, the last scene ,,Note memory function does not work. yy If you press V once during Repeat yy This unit does not memorize settings of Chapter/Track playback, the repeat playback a disc if you switch off the unit before cancels. commencing to play it. yy This function may not work on some disc or title. 30 Operating

Repeating a specific portion Changing content list view eroty yui This player can repeat a portion you have selected. On the [Movie], [Music] or [Photo] menu, you can 1. While playback, press REPEAT (h) to select change the content list view. [A-] at the beginning of the portion you wish to repeat. Method 1 2. Press ENTER (b) at the end of the portion. Your Press red (R) coloured button repeatedly. selected portion will be repeated continually. 3. To return to normal playback, press REPEAT (h) repeatedly to select [Off]. ,,Note yy You cannot select a portion less than 3 seconds. yy This function may not work on some disc or title.

4 Viewing content information Operating y The player can display the content information. 1. Select a file usingw/s/a/d . 2. Press INFO/MENU (m) to display the option menu. 3. Select the [Information] option using w/s, and press ENTER (b). The file information appears on the screen. While movie playback, you can display the file information by pressing TITLE/POP-UP. ,,Note The information displayed on the screen may not correct comparing actual content information.

Method 2 1. On the content list, press INFO/MENU (m) to display the option menu. 2. Use w/s to select the [View Change] option. 3. Press ENTER (b) to change the content list view. Operating 31

Selecting a subtitle file Options while viewing a photo y i If the subtitle file name is different from the movie You can use various options during viewing a file name, you need to select the subtitle file on the photo in full screen. [Movie] menu before playing the movie. 1. While viewing a photo in full screen, press INFO/ 1. Use w/s/a/d to select the subtitle file you MENU (m) to display the option menu. wish to play in the [Movie] menu. 2. Select an option using w/s. 2. Press ENTER (b).

Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when a Current photo/Total number of photos 4

you play the movie file. – Use a/d to view previous/next photo. Operating Note b Slide Show – Press ENTER (b) to start or ,, pause slide show. If you press Z (STOP) while playback, the subtitle selection is cancelled. c Music Select – Select the background music for the slide show (page 32). d Music –Press ENTER (b) to start or pause background music. e Rotate – Press ENTER (b) to rotate the photo clockwise. f Zoom – Press ENTER (b) to display the [Zoom] menu. g Effect – Use a/d to select a transition effect between photos in a slide show. h Speed – Use a/d to select a delaying speed between photos in a slide show. 3. Press BACK (1) to exit the option menu. 32 Operating

Listening to music while slide On-Screen display show You can display and adjust various information and i settings about the content. You can display photo files while listening to music files. Displaying content information 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. on-screen 2. Use w/s to select [Music Select] option, and eroy press ENTER (b) to display the [Music Select] menu. 1. While playback, press INFO/MENU (m) to show various playback information. 3. Use w/s to select a device, and press ENTER (b). 4. Use w/s to select a file or a folder you wish to play.

4 Operating

Select g and press ENTER (b) to display the upper directory. 5. Use d to select [OK], and press ENTER (b) to a Title – current title number/total number of complete music selection. titles b Chapter – current chapter number/total number of chapters c Time – elapsed playing time/total playback time d Audio – selected audio language or channel e Subtitle – selected subtitle. f Angle – selected angle/total number of angles g TV Aspect Ratio – selected TV aspect Ratio h Picture Mode – selected picture mode Operating 33

2. Select an option using w/s. Playing from selected time 3. Use a/d to adjust the selected option value. 4. Press BACK (1) to exit the On-Screen display. eroy Note 1. Press INFO/MENU (m) during playback. The ,, time search box shows the elapsed playing yy If no button is pressed for a few seconds, time. the on-screen display disappears. 2. Select the [Time] option and then input the yy A title number cannot be selected on some required start time in hours, minutes, and discs. seconds from left to right. yy Available items may differ depending on For example, to find a scene at 2 hours, 10 discs or titles. minutes, and 20 seconds, enter “21020”. yy If an interactive Blu-ray Disc is playing back, Press a/d to skip the playback 60 seconds some setting information is displayed on forward or backward. the screen but prohibited to be changed. 3. Press ENTER (b) to start playback from selected time. ,,Note This function may not work on some disc or titles. 4 Selecting a subtitle language Operating eroy 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use w/s to select the [Subtitle] option. 3. Use a/d to select desired subtitle language. 4. Press BACK (1) to exit the On-Screen display. ,,Note yy Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POP-UP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu. yy You can select the [Subtitle] option on the On-Screen display directely by pressing SUBTITLE (]) button. 34 Operating

Hearing a different audio Changing the TV Aspect Ratio eroy eoy 1. During playback, press INFO/MENU (m) to You can change the TV aspect ratio setting while display the On-Screen display. playback. 2. Use w/s to select the [Audio] option. 1. During playback, press INFO/MENU (m) to 3. Use a/d to select desired audio language, display the On-Screen display. audio track or audio channel. 2. Use w/s to select the [TV Aspect Ratio] ,,Note option. yy Some discs allow you to change audio 3. Use a/d to select desired option. selections only via the disc menu. In this 4. Press BACK (1) to exit the On-Screen display. case, press TITLE/POP-UP or DISC MENU Note button and choose the appropriate audio ,, from the selections on the disc menu. Even if you change the value of the [TV Aspect Ratio] option in On-Screen display, the [TV yy Immediately after you have switched sound, Aspect Ratio] option in the [Setup] menu is there may be a temporary discrepancy not changed. between the display and actual sound. yy On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed with [MultiCH] 4 in the on-screen display. Operating yy You can select the [Audio] option on the On-Screen display directely by pressing AUDIO ([) button.

Watching from a different angle ero If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use w/s to select the [Angle] option. 3. Use a/d to select desired angle. 4. Press BACK (1) to exit the On-Screen display. Operating 35

Changing subtitle code page Changing the Picture Mode y eroy If the subtitle is displayed in broken letter, you can You can change the [Picture mode] option while change the subtitle code page to view the subtitle playback. file properly. 1. During playback, press INFO/MENU (m) to 1. During playback, press INFO/MENU (m) to display the On-Screen display. display the playback menu. 2. Use w/s to select the [Picture Mode] option. 2. Use w/s to select the [Code Page] option. 3. Use a/d to select desired option. 3. Use a/d to select desired code option. 4. Press BACK (1) to exit the On-Screen display.

Setting the [User setting] option 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use w/s to select the [Picture Mode] option. 3. Use a/d to select the [User setting] option, and press ENTER (b).

4

4. Press BACK (1) to exit the On-Screen display. Operating

4. Use w/s/a/d to adjust the [Picture Mode] options. Select [Default] option then press ENTER (b) to reset the all video adjustments. 5. Use w/s/a/d to select the [Close] option, and press ENTER (b) to finish setting. 36 Operating

8. Use w/s/a/d to select [OK], and press Audio CD recording ENTER (b) to start Audio CD recording. If you want to stop in progressing Audio CD You can record one desired track or all of the tracks recording, press ENTER (b) while [Cancel] is in Audio CD to a USB storage device. highlighted. 1. Insert a USB storage device to the USB port on 9. A message appears when Audio CD recording is the front panel. completed. Press ENTER (b) to check the audio 2. Press B (OPEN/CLOSE), and place an Audio CD file created in the destination folder. on the disc tray. ,,Note Press B (OPEN/CLOSE) to close the disc tray. yy When using Audio CD recording, please use The playback starts automatically. the USB flash drive/external HDD formatted 3. Press INFO/MENU (m) to display the option in either FAT16 or FAT32. menu. yy The table below shows the average 4. Use w/s to select [CD Recording] option, and recording time from an audio track with 4 press ENTER (b). minutes of playback time to an audio file 5. Use w/s to select a track you wish to copy on with 192 kbps as an example. the menu, and press ENTER (b). stop mode while playback Repeat this step to select tracks as many as you 1 min. 4 min. can. 4 Selects all the tracks on an yy Recording times in the table above are Operating Audio CD. approximate. yy Actual recording time for USB storage Selects an encoding option device varies depending on the USB storage from the pop-up menu device’s ability. (128kbps, 192kbps or 320kbps). yy Make sure that there is minimum of 50 MB Cancels the recording and free space is needed when recording into returns to the previous screen. the USB storage device. 6. Use w/s/a/d to select [Start], and press yy The length of the audio should be longer ENTER (b). than 20 seconds for the proper recording. 7. Use w/s/a/d to select a destination folder yy Do not turn off this player or extract the to be copied. connected USB storage device during Audio CD recording. >>Caution The recording or copying features on this player are provided for your personal and non-commercial use. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a If you want to create a new folder, use criminal offense. This equipment should not be w/s/a/d to select [New Folder] and press used for such purposes. LG expressly disclaims ENTER (b). any responsibility for illegal distribution or Enter a folder name using virtual keyboard, and use of unauthorized content in commercial press ENTER (b) while [OK] is selected. purpose. Be Responsible Respect Copyrights 5 Troubleshooting

Troubleshooting 37

Troubleshooting

General

Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely.

The unit does not start yy Insert a playable disc. (Check the disc type, colour system, and playback. regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or yy The files are not recorded in a format that the unit can play. music files. yy The unit does not support the codec of the movie file. The remote control does not yy The remote control is not pointed at the remote sensor of the unit. work properly. yy The remote control is too far from the unit. yy There is an obstacle in the path of the remote control and the unit. yy The battery in the remote control is exhausted. 5

The unit is plugged in, but the You can reset the unit as follows. Troubleshooting power will not turn on or off. yy Unplug the power cord, wait at least five seconds, and then plug it in The unit is not operating again. normally. 38 Troubleshooting

Picture

Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts. yy The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection. Picture noise appears. yy You are playing a disc recorded in a colour system that is different from your TV. yy Set the resolution which your TV accepts.

Customer Support You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://www.lg.com or contact LG Electronics customer care centre.

5 Open source software notice

Troubleshooting To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are available to download with the source code. 6 Appendix

Appendix 39

Controlling a TV with Setting up the remote to control your TV the Supplied Remote You can operate your TV with the supplied remote Control control. If your TV is listed in the table below, set the appropriate manufacturer code. You can control your TV using the buttons below. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code Number LG 1(Default), 2 Zenith 1, 3, 4 GoldStar 1, 2

By pressing You can Samsung 6, 7 8, 9 1 (TV POWER) Turn the TV on or off. Scan up or down through Hitachi 4 PR/CH +/– memorized channels. 2. Release the 1 (TV POWER) button to complete VOL +/– Adjust the volume of the TV setting. Depending on your TV, some or all buttons may not Switch the TV’s input source function on the TV, even after entering the correct AV/INPUT between the TV and other manufacturer code. When you replace the batteries input sources. of the remote, the code number you have set may Note be reset to the default setting. Set the appropriate ,, code number again. Depending on the unit being connected, you may not be able to control your TV using some 6

of the buttons. Appendix 40 Appendix

Area Code List

Choose an area code from this list.

Area Code Area Code Area Code Area Code Afghanistan AF Fiji FJ Monaco MC Singapore SG Argentina AR Finland FI Mongolia MN Slovak Republic SK Australia AU France FR Morocco MA Slovenia SI Austria AT Germany DE Nepal NP South Africa ZA Belgium BE Great Britain GB Netherlands NL South Korea KR Bhutan BT Greece GR Antilles AN Spain ES Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK Brazil BR Hong Kong HK Nigeria NG Sweden SE Cambodia KH Hungary HU Norway NO Switzerland CH Canada CA India IN Oman OM Taiwan TW Chile CL Indonesia ID Pakistan PK Thailand TH China CN Israel IL Panama PA Turkey TR Colombia CO Italy IT Paraguay PY Uganda UG Congo CG Jamaica JM Philippines PH Ukraine UA Costa Rica CR Japan JP Poland PL United States US Croatia HR Kenya KE Portugal PT Uruguay UY Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ Denmark DK Libya LY Russian Vietnam VN Ecuador EC Luxembourg LU Federation RU Zimbabwe ZW Egypt EG Malaysia MY Saudi Arabia SA 6 El Salvador SV Maldives MV Senegal SN Appendix Ethiopia ET Mexico MX Appendix 41

Language code List

Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].

Language Code Language Code Language Code Language Code Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368 Afrikaans 6570 Frisian 7089 Macedonian 7775 Singhalese 8373 Albanian 8381 Galician 7176 Malagasy 7771 Slovak 8375 Amharic 6577 Georgian 7565 Malay 7783 Slovenian 8376 Arabic 6582 German 6869 Malayalam 7776 Spanish 6983 Armenian 7289 Greek 6976 Maori 7773 Sudanese 8385 Assamese 6583 Greenlandic 7576 Marathi 7782 Swahili 8387 Aymara 6588 Guarani 7178 Moldavian 7779 Swedish 8386 Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tagalog 8476 Bashkir 6665 Hausa 7265 Nauru 7865 Tajik 8471 Basque 6985 Hebrew 7387 Nepali 7869 Tamil 8465 Bengali; Bangla 6678 Hindi 7273 Norwegian 7879 Telugu 8469 Bhutani 6890 Hungarian 7285 Oriya 7982 Thai 8472 Bihari 6672 Icelandic 7383 Panjabi 8065 Tonga 8479 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Turkish 8482 Bulgarian 6671 Interlingua 7365 Persian 7065 Turkmen 8475 Burmese 7789 Irish 7165 Polish 8076 Twi 8487 Byelorussian 6669 Italian 7384 Portuguese 8084 Ukrainian 8575 Chinese 9072 Japanese 7465 Quechua 8185 Urdu 8582 Croatian 7282 Kannada 7578 Rhaeto-Romance 8277 Uzbek 8590 6

Czech 6783 Kashmiri 7583 Rumanian 8279 Vietnamese 8673 Appendix Danish 6865 Kazakh 7575 Russian 8285 Volapük 8679 Dutch 7876 Kirghiz 7589 Samoan 8377 Welsh 6789 English 6978 Korean 7579 Sanskrit 8365 Wolof 8779 Esperanto 6979 Kurdish 7585 Scots Gaelic 7168 Xhosa 8872 Estonian 6984 Laotian 7679 Serbian 8382 Yiddish 7473 Faroese 7079 Latin 7665 Serbo-Croatian 8372 Yoruba 8979 Latvian, Lettish 7686 Shona 8378 Zulu 9085 Fiji 7074 Lingala 7678 Finnish 7073 42 Appendix

Trademarks and Licenses

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, Blu-ray Disc™, Blu-ray™, BONUSVIEW™ and the Symbol, & DTS and the Symbol together are the logos are trademarks of the Blu-ray Disc registered trademarks & DTS 2.0+Digital Out is a Association. trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

“DVD Logo” is a trademark of DVD Format/Logo “AVCHD” and the “AVCHD” logo are trademarks of Licensing Corporation. Panasonic Corporation and Sony Corporation.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries Java is a trademark of Oracle and/or its affiliates. and are used under license.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered 6 trademarks of HDMI Licensing LLC in the United States and other countries. Appendix “x.v.Colour” is a trademark of Sony Corporation.

Manufactured under license from . Dolby and the double-D symbol are trademarks of Dolby Laboratories. Appendix 43

Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially- produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

6 Appendix 44 Appendix

Audio Output Specifications

Jack/Setting COAXIAL (DIGITAL AUDIO OUT) *3 Source PCM Stereo DTS Re-encode *4 BitStream Dolby Digital PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch DTS Dolby Digital DTS PCM 2ch DTS DTS DTS-HD PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch DTS PCM 2ch Linear PCM 7.1ch PCM 2ch DTS PCM 2ch

Jack/Setting HDMI OUT Source PCM Stereo PCM Multi-Ch DTS Re-encode *4 BitStream *1 *2 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby TrueHD DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS Linear PCM 7.1ch 6 *1 The secondary and interactive audio may not *4 If the [Digital Output] option is set to [DTS re- Appendix be included in the output bitstream if [Digital encode], the audio output is limited to 48 kHz Output] option is set to [BitStream]. (Except and 5.1Ch. If the [Digital Output] option is set LPCM Codec : the output always include to [DTS re-encode], the DTS Re-encode audio interactive and secondary audio.) is outputted for BD-ROM discs, and the original *2 This player automatically selects the HDMI audio audio is outputted for the other discs (like according to the decoding capability of the [BitStream]). connected HDMI device even though [Digital yy If the HDMI OUT jack is connected to your TV Output] option is set to [BitStream]. with High Speed HDMI™ Cable and Dolby Digital *3 On the PCM audio output, the sampling Plus/Dolby TrueHD is outputted from HDMI OUT frequency of DIGITAL AUDIO OUT is limited to jack, COAXIAL OUT jack is limited to “PCM 2ch” 96 kHz. (When the HDMI and DIGITAL AUDIO OUT are connected simultaneously). Appendix 45 yy The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback. yy You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using [Digital Output] and [Sampling Freq.] options on the [Setup] menu (see page 24). yy With digital audio connection (DIGITAL AUDIO OUT or HDMI OUT), Disc Menu button sounds of BD-ROM may not be heard if the [Digital Output] option is set to [BitStream]. yy If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. yy Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

6 Appendix 46 Appendix

Specifications

General Power requirements DC 12 V 0 1 A AC Adapter WA-12M12Fx Dimensions (W x H x D) Approx. 270 x 39 x 198 mm Net Weight (Approx.) 0.95 Kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 %

Outputs HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) DIGITAL AUDIO OUT (COAXIAL) 0.5 V (p-p), 75 Ω, RCA jack x 1

System Semiconductor laser wavelength 405 nm / 650 nm Signal system Standard PAL/NTSC colour TV system Bus Power Supply (USB) DC 5 V 0 500 mA

yy Design and specifications are subject to change without notice.

6 Appendix Appendix 47

Maintenance Notes on Discs Handling Discs Handling the Unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the When shipping the unit disc. Please save the original shipping carton and packing materials. If you need to ship the unit, for Storing Discs maximum protection, re-pack the unit as it was After playing, store the disc in its case. Do not originally packed at the factory. expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct Cleaning the unit sunlight. To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly Cleaning Discs moistened with a mild detergent solution. Do not Fingerprints and dust on the disc can cause poor use strong solvents such as alcohol, benzine, or picture quality and sound distortion. Before playing, thinner, as these might damage the surface of the clean the disc with a clean cloth. Wipe the disc from unit. the centre to out. Keeping the exterior surfaces clean Do not use strong solvents such as alcohol, yy Do not use volatile liquids such as insecticide benzine, thinner, commercially available cleaners, spray near the unit. or anti-static spray intended for older vinyl records. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.

Maintaining the Unit The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. 6 For details, please contact your nearest authorized Appendix service centre.