DOCSLIB.ORG

Search Electronics Dummy Components Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Search Electronics Dummy Components Catalog Dummy Components Catalog Draft Search Electronics, Inc. 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 http://www.searchelec.com/ Check our Website for Updates Table of Contents Picture Part Number Title SECTION Cover 1 Table of Contents 2 Surface Mount Devices 3 QFP 3.1 Diagrams and Part Number 3.1 System. QFP QUAD Flat Packs (>1.4mm Thick) 3.1.1 TQFP Thin Quad Flat Packs (<=1.4mm 3.1.2 Thick) LQFP Low Quad Flat Packs (<=1.0mm 3.1.3 Thick) BQFP Bumpered Quad Flat Packs 3.1.4 SO Small Outline Package 3.2 SOIC Small Outline Integrated Circuit (< 3.2.1 0.3in /7.5mm Wide) SOLIC Small Outline Large Integrated 3.2.2 Circuit (=> 0.300in/7.5mm Wide) SSOP Shrink Small Outline Package 3.2.3 TSOP-T1 Thin Small Outline Package-Type 3.2.4 1- (Height <= 1.0mm) TSOP-T2 Thin Small Outline Package-Type 3.2.5 2 (Height <= 1.0mm) TSSOP Thin Shrink Small Outline Package 3.2.6 (Height <= 1.0mm) TSSOP-EXP Thin Shrink Small Outline Package 3.2.7 with Exposed Pad (Height <= 1.0mm) VSOP Very Small Outline Package 3.2.8 J Lead Packages 3.4 PLCC Plastic Leaded Chip Carrier 3.4.1 SOJ Small Outline J Lead 3.4.2 BGA Ball Grid Array 3.5 Search Electronics 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 www.searchelec.com Check our Website for Updates - 1 – Section 2.2 Table of Contents V1-1.doc Revision:82 Table of Contents Picture Part Number Title SECTION uBGA-mBGA Micro Ball Grid Array (µBGA- 3.5.1 mBGA) PBGA Plastic Ball Grid Array 3.5.3 CABGA Chip Scale/Array BGA (CSBGA), 3.5.11 fleXBGA, Tape Array Ball Grid Array (TABGA) SOT Small Outline Transistors 3.6 SOD Small Outline Diodes (SOD, 3.7 MELF) Surface Mount Capacitors 3.8 SMCC Surface Mount Ceramic Chip 3.8.1 Capacitors Surface Mount Resistors and 3.9 Resistor Arrays CR Surface Mount Chip Resistors 3.9.1 SMCRA Surface Mount Chip Resistor 3.9.3 Arrays Flat Packs 3.13 FP Through Hole Devices 4 DIP Dual Inline Packages 4.1 AR Axial Resistors 4.2 AC Axial Capacitors 4.3 RC Radial Capacitor 4.4 TO Transistor Packages (Through 4.5 Hole) DO Diode Packages (Through Hole) 4.6 AI Axial Inductors 4.7 LED Light Emitting Diodes (Through 4.8 Hole) SIP Single Inline Packages 4.9 Search Electronics 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 www.searchelec.com Check our Website for Updates - 2 – Section 2.2 Table of Contents V1-1.doc Revision:82 Table of Contents Picture Part Number Title SECTION Accessories 5 Packaging Trays, Tape, Tubes etc. 5.3 Search Electronics 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 www.searchelec.com Check our Website for Updates - 3 – Section 2.2 Table of Contents V1-1.doc Revision:82 Diagram 1 Part Number Information: LQFP100-14X20mm-0.65mm-2mm <-TR> Tape and Reel Foot Print (FP) Pitch (P) Body Length (L) Body Width (W) Pin Count Diagram 2 Package Style: TQFP-Thin Quad Flat Pack 1.0mm Max Thick Body LQFP-Low Quad Flat Pack 1.4mm Max Thick Body- Former designation was LQFP before 1.0mm Thick body was introduced QFP-Quad Flat Pack Greater than 1.4mm Thick Body BQFP-Bumpered Quad Flat Pack Diagram 3 See Diagram 3 Search Electronics, Inc. 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 www.searchelec.com Check our Website for Updates - 1 - 3.1 Diagrams and Part Number System.doc Revision:11 Foot Print Tape 3.1.1 QFP Length (L) Width (W) (FP) Pitch (P) Height (H) Width Tape Pitch Qty Qty Diagr per Per Part Number am Leads in mm in mm in mm in mm in mm in mm in mm Tray Reel QFP48-7X7mm-0.5mm-2mm 2 48 0.276 7.000 0.276 7.000 0.079 2.000 0.020 0.500 - - - 250 QFP48-7X7mm-0.5mm-2.2mm 2 48 0.276 7.000 0.276 7.000 0.087 2.200 0.020 0.500 0.098 2.500 - - 250 QFP44-10X10mm-0.8mm-2.6mm 2 44 0.394 10.000 0.394 10.000 0.102 2.600 0.031 0.800 0.069 1.750 - - 50 QFP44-10X10mm-0.8mm-3.2mm 2 44 0.394 10.000 0.394 10.000 0.126 3.200 0.031 0.800 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP44-10X10mm-0.8mm-3.9mm 2 44 0.394 10.000 0.394 10.000 0.154 3.900 0.031 0.800 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP44-10X10mm-0.8mm-4.2mm 2 44 0.394 10.000 0.394 10.000 0.165 4.200 0.031 0.800 > .055 > 1.4 - - 50 QFP52-10X10mm-0.65mm-3.2mm 2 52 0.394 10.000 0.394 10.000 0.126 3.200 0.026 0.650 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP52-10X10mm-0.65mm-3.9mm 2 52 0.394 10.000 0.394 10.000 0.154 3.900 0.026 0.650 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP56-10X10mm-0.5mm-2.8mm 2 56 0.394 10.000 0.394 10.000 0.110 2.800 0.020 0.500 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 120 QFP64-10X10mm-0.5mm-3.2mm 2 64 0.394 10.000 0.394 10.000 0.126 3.200 0.020 0.500 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP64-10X10mm-0.5mm-3.9mm 2 64 0.394 10.000 0.394 10.000 0.154 3.900 0.020 0.500 > .055 > 1.4 0.94 24.0 0.630/0.945 16/24 96 500 QFP44-12X12mm-0mm-5.2mm 2 44 0.472 12.000 0.472 12.000 0.205 5.200 - - > .055 > 1.4 - - 40 QFP48-12X12mm-0mm-5.2mm 2 48 0.472 12.000 0.472 12.000 0.205 5.200 - - > .055 > 1.4 - - 40 QFP44-14X14mm-1mm-3.2mm 2 44 0.551 14.000 0.551 14.000 0.126 3.200 0.039 1.000 > .055 > 1.4 1.26 32.0 0.945 24 84 350 QFP52-14X14mm-1mm-3.2mm 2 52 0.551 14.000 0.551 14.000 0.126 3.200 0.039 1.000 > .055 > 1.4 1.26 32.0 0.945 24 84 350 QFP52-14X14mm-1mm-3.6mm 2 52 0.551 14.000 0.551 14.000 0.142 3.600 0.039 1.000 0.106 2.700 - - - 60 QFP52-14X14mm-1mm-3.9mm 2 52 0.551 14.000 0.551 14.000 0.154 3.900 0.039 1.000 > .055 > 1.4 1.26 32.0 0.945 24 84 350 QFP64-14X14mm-0.8mm-3.2mm 2 64 0.551 14.000 0.551 14.000 0.126 3.200 0.031 0.800 > .055 > 1.4 1.26 32.0 0.945 24 84 350 QFP64-14X14mm-0.8mm-2.4mm 2 64 0.551 14.000 0.551 14.000 0.094 2.400 0.031 0.800 > .055 > 1.4 - - - - 50 - QFP64-14X14mm-0.8mm-2.8mm 2 64 0.551 14.000 0.551 14.000 0.110 2.800 0.031 0.800 > .055 > 1.4 - - - - - - QFP64-14X14mm-0.8mm-3.2mm 2 64 0.551 14.000 0.551 14.000 0.126 3.200 0.031 0.800 > .055 > 1.4 1.26 32.0 0.945 24 84 350 QFP64-14X14mm-0.8mm-3.9mm 2 64 0.551 14.000 0.551 14.000 0.154 3.900 0.031 0.800 > .055 > 1.4 1.26 32.0 0.945 24 84 350 Search Electronics, Inc. 113 N. First Ave., Upland, CA, USA Phone: 1-909-949-4215 Fax: 1-909-985-8229 www.searchelec.com Check our Website for Updates - 1 - 3.1.1 QFP 1.doc Revision:13 3.1.1 QFP Cont. Length (L) Width (W) Foot Print (FP) Pitch (P) Height (H) Tape Width Tape Pitch Qty Qty Diagr per Per Part Number am Leads in mm in mm in mm in mm in mm in mm in mm Tray Reel QFP80-14X14mm-0.65mm-3.2mm 2 80 0.551 14.000 0.551 14.000 0.126 3.200 0.026 0.650 > .055 > 1.4 1.26 32.0 0.945 24 84 35 QFP80-14X14mm-0.65mm-3.4mm 2 80 0.551 14.000 0.551 14.000 0.134 3.400 0.026 0.650 > .055 > 1.4 - - - - - QFP80-14X14mm-0.65mm-3.9mm 2 80 0.551 14.000 0.551 14.000 0.154 3.900 0.026 0.650 > .055 > 1.4 1.26 32.0 0.945 24 84 35 QFP80-14X14mm-0.65mm-3.2mm 2 80 0.551 14.000 0.551 14.000 0.126 3.200 0.026 0.650 > .055 > 1.4 1.26 32.0 0.945 24 84 35 QFP100-14X14mm-0.5mm-0mm 2 100 0.551 14.000 0.551 14.000 - - 0.020 0.500 > .055 > 1.4 - - 90 QFP64-14X20mm-1mm-3.2mm 1 64 0.787 20.000 0.551 14.000 0.126 3.200 0.039 1.000 > .055 > 1.4 1.73 44.0 1.260 32 60 20 QFP64-14X20mm-1mm-3.9mm 1 64 0.787 20.000 0.551 14.000 0.154 3.900 0.039 1.000 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP64-14X20mm-1mm-4.6mm 1 64 0.787 20.000 0.551 14.000 0.181 4.600 0.039 1.000 > .055 > 1.4 - - - - - - QFP64-14X20mm-1mm-5mm 1 64 0.787 20.000 0.551 14.000 0.197 5.000 0.039 1.000 > .055 > 1.4 - - - - 50 - QFP80-14X20mm-0.8mm-3.2mm 1 80 0.787 20.000 0.551 14.000 0.126 3.200 0.031 0.800 > .055 > 1.4 1.73 44.0 1.260 32 50/66 35 QFP80-14X20mm-0.8mm-3.6mm 1 80 0.787 20.000 0.551 14.000 0.142 3.600 0.031 0.800 > .055 > 1.4 - - - - 66 50 QFP80-14X20mm-0.8mm-3.9mm 1 80 0.787 20.000 0.551 14.000 0.154 3.900 0.031 0.800 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP80-14X20mm-0.8mm-5mm 1 80 0.787 20.000 0.551 14.000 0.197 5.000 0.031 0.800 > .055 > 1.4 - - - - - QFP100-14X20mm-0.65mm-2.8mm 1 100 0.787 20.000 0.551 14.000 0.110 2.800 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-3.2mm 1 100 0.787 20.000 0.551 14.000 0.126 3.200 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-3.4mm 1 100 0.787 20.000 0.551 14.000 0.134 3.400 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-3.5mm 1 100 0.787 20.000 0.551 14.000 0.138 3.500 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-3.7mm 1 100 0.787 20.000 0.551 14.000 0.146 3.700 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-3.9mm 1 100 0.787 20.000 0.551 14.000 0.154 3.900 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 66 20 QFP100-14X20mm-0.65mm-4.9mm 1 100 0.787 20.000 0.551 14.000 0.193 4.900 0.026 0.650 > .055 > 1.4 1.73 44.0 1.260 32 60 Search Electronics, Inc.
Load more

Recommended publications
  • Smd Packages
    TEL JHB : (011) 493-9307 MANTECH CAPE : (021) 535-3150 KZN : (031) 309-7692 ELECTRONICS FAX : (011) 493-9319 International Components Distributor [email protected] www.mantech.co.za SMD PACKAGES Contents 1. Two-terminal packages 2. Three-terminal packages 3. Packages with four or more terminals Surface-mount components are usually smaller than their counterparts with leads, and are designed to be handled by machines rather than by humans. The electronics industry has standardized package shapes and sizes (the leading standardisation body is JEDEC). These include: _______________________________________________________________________________________________ PO BOX 260455 - EXCOM - 2023 - SOUTH AFRICA Two-terminal packages o Rectangular passive components (mostly resistors and capacitors): . 01005 (0402 metric) : 0.016" × 0.008" (0.4 mm × 0.2 mm) Typical power rating for resistors 1/32 Watt . 0201 (0603 metric) : 0.024" × 0.012" (0.6 mm × 0.3 mm) Typical power rating for resistors 1/20 Watt . 0402 (1005 metric) : 0.04" × 0.02" (1.0 mm × 0.5 mm) Typical power rating for resistors 1/16 Watt . 0603 (1608 metric) : 0.063" × 0.031" (1.6 mm × 0.8 mm) Typical power rating for resistors 1/16 Watt . 0805 (2012 metric) : 0.08" × 0.05" (2.0 mm × 1.25 mm) Typical power rating for resistors 1/10 or 1/8 Watt . 1206 (3216 metric) : 0.126" × 0.063" (3.2 mm × 1.6 mm) Typical power rating for resistors 1/4 Watt . 1210 (3225 metric) : 0.126" × 0.1" (3.2 mm × 2.5 mm) Typical power rating for resistors 1/2 Watt . 1806 (4516 metric) : 0.177" × 0.063" (4.5 mm × 1.6 mm) .
    [Show full text]
  • EE Concierge Style Guide PCB Layout and Component Creation
    EE Concierge Style Guide PCB Layout and Component Creation For more information or component creation services visit EEConcierge.com Version 1.2 For more information or component creation services visit EEConcierge.com ​ Table of Contents Introduction Checklist: What a perfect part looks like Style Guide: Pins Number of Pins Pin Numbers Pin Names Pin Types Style Guide: Attributes Step by Step Walkthrough Style Guide: Symbols Step by Step Walkthrough Headers Pin Organization Style Guide: Footprints General Tips Component Origin Layers Top Component Top Package Outline Top Solder Mask Top Paste Mask Top Copper Top Courtyard Top Silkscreen Top Keepout Bottom Layers Mechanical Details, Rulers, Notes, Design Rules Hole Layer Hole Sizing Plated Through Holes TO-92 and Other Parts With Overlapping Holes/Pads Non Plated Through Holes (NPTH) Axial Components DIP Components Thermal Pads BGAs Additional Guidelines Common Mistakes Made Missing refdes (both symbol and footprint) For more information or component creation services visit EEConcierge.com ​ Holes not big enough (exact size of the hole) The datasheet is for a different part No part number on IC schematic No keepouts (this came up with antennas) Ground or power pins on the top or bottom of a symbol No pin one marker (footprint) Footprints not centered Missing mechanical details or holes on the wrong layers Wrong number of pins Bad pin names Missing overbars or # or n in the pin name Marking pin one improperly Specific Guidelines for Axial Components Specific Guidelines for Radial Components
    [Show full text]
  • Electronic Materials and Components-Semiconductor Packages
    Electronic materials and components-Semiconductor packages Semiconductor ‘back-end’ processes We will learn much more about semiconductor ‘back end’ processes in subsequent modules, but you need to understand at least something of the terminology and what is involved in turning a ‘chip’ into a finished package1. 1 It is always very dangerous to point people at sources of information on packaging, especially now that the wonderful Fullman site has disappeared. However, you might like to take a look at what a doctoral student can achieve at http://chenjian.virtualave.net/packaging. The starting point for semiconductors is the wafer, which contains a (very large) number of devices, separated by small gaps, and electrically isolated from each other as part of the processing. Starting with a blank wafer of extremely pure silicon, building up layers by deposition techniques, etching patterns, and implanting dopants into the silicon structure using high energy particles, the semiconductor ‘fab’ ships a wafer which is partially probe-tested, but needs terminations in order to communicate with the outside world. These ‘front end’ processes attract the headlines, but the back end of the pantomime horse is just as important! The ‘back end’ process consists of sawing the wafer into individual dice (the terms ‘chip’ and ‘die’ are equivalent), mounting the die on a lead-frame or other mount using conductive adhesive, and finally making fine wire connections to the top surface – this ‘wire bonding’ process uses gold and aluminium wires typically 25-33 µm in diameter. Because wires and semiconductor are relatively fragile and easy to contaminate, the die will then be protected in some way.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 6,236,223 B1 Brady Et Al
    USOO6236223B1 (12) United States Patent (10) Patent No.: US 6,236,223 B1 Brady et al. (45) Date of Patent: May 22, 2001 (54) METHOD AND APPARATUS FOR WIRELESS O 527 321 2/1993 (EP). RADIO FREQUENCY TESTING OF RFID O 646 983 4/1995 (EP). INTEGRATED CIRCUITS WO 98/16070 4/1998 (WO). (75) Inventors: Michael John Brady, Brewster; OTHER PUBLICATIONS Dah-Weih Duan, Yorktown, both of NY (US) “RF Measurements On SIEGET Bipolar Transistors: Pre dicting Performance Straight From The Wafer, By: Jakob (73) Assignee: Intermec IP Corp., Woodland Hills, Huber and Gerhard Lohninger: XP000598992 Applications CA (US) Discrete Semiconductors Mar. 1, 1996, pp. 34-36. (*) Notice: Subject to any disclaimer, the term of this “Multifunction Credit Card Package”, IBM Technical Dis patent is extended or adjusted under 35 closure Bulletin, vol. 38, No. 08, Aug. 1995, p. 17. U.S.C. 154(b) by 0 days. “A Low-Power CMOS Integrated Circuit for Field-Pow ered Radio Frequency Identification Tag”. By Friedman et al., 1997 IEEE International Solid State Circuits Confer (21) Appl. No.: 09/247,900 ence, Paper SA 17.5, pp. 294, 295, 474. (22) Filed: Feb. 10, 1999 * cited by examiner Related U.S. Application Data (60) Provisional application No. 60/107.593, filed on Nov. 9, 1998. Primary Examiner Safet Metahic ASSistant Examiner-E PLeRoux (51) Int. Cl." ................................................. G01R 31/26 (74) Attorney, Agent, or Firm-O'Melveny & Myers (52) U.S. Cl. .............................................................. 324/765 (58) Field of Search ... ... 324/754, 72.5, (57) ABSTRACT 324/764, 601, 605, 763, 765, 158 P, 752; A method and apparatus for wireless radio frequency (RF) 713/189, 168; 714/733, 30; 370/225, 390, testing of radio frequency identification integrated circuits 400; 361/777, 774, 780; 174/260, 261; (RFIDIC) is disclosed.
    [Show full text]
  • Topline 2001 Catalog
    HOW TO ORDER PAYMENT TERMS • Credit Terms (Net 30) for established customers. • American Express, Mastercard and VISA accepted. VISA ® Master Card AMERICAN EXPRESS ® CONFIRMING PURCHASE ORDERS • Confirming purchase orders are required for all orders over $500. MINIMUM PER ORDER • USA/Canada $50 minimum. • Export $1000. F.O.B. POINT AND SHIPPING • F.O.B. Garden Grove, California. Please specify preferred method of shipment when placing order. TM e-mail [email protected] www.topline.tv 7331A Garden Grove Blvd, Garden Grove, CA 92841 USA Toll Free USA/Canada 1-800-776-9888 Tel 1-714-898-3830 Fax 1-714-891-0321 © 2001. TopLine. All Rights Reserved This catalog, or any parts thereof, must not be reproduced in any form without written permission of TopLine. Reprint July 2001 TM Find It Fast SERIES DESCRIPTION VIEW WEBCODE PAGE SC Ceramic Chip Capacitor 7 SD Molded Tantalum XD1 8 SE Aluminum Capacitor 9 SR Resistor Chip 10 SRM Melf Resistor XD1 11 SRA Resistor Array 12 Top SI InductorLine XD1 13 SERIES DESCRIPTION VIEW WEBCODE PAGE SOT Transistor XD1 14 DPAK Power Discrete XD1 15 SOD, SM Melf Diode/Rectifier XD1 16 SMA~SMC Rectangular Diode/Rectifier XD1 17 2 TM Find It Fast SERIES DESCRIPTION VIEW WEBCODE PAGE PLCC Chip Carrier XP1 18 T M LCC Chip Carrier XL1 19 M SOIC Gull WingT 20 e Lin Top SOJ J-Lead XS1 21 T o p L in FP Flat Packe XF1 22 MSOP Mini Small Outline Package XS1 23 M T SSOP Shrink Small Outline Package XS1 24 TSSOP Thin Shrink Outline Package XS1 25 TSOP Type 1 XO1 26 ine pL To TSOP Type 2 XO1 27 TQFP Thin Quad Flat Pack 28 LQFP
    [Show full text]
  • Dummy Components Part Numbering System
    TM Part Numbering System Series Page Pcode Description SC 4-5 SD 6-7 SE 8-9 Chips XD1 SR 10-11 Passives SRM 12-13 SI 14-15 SOT 16-17 DPAK 18-19 Discrete XD1 MELF DIODE 20-21 Semi RECTANGULAR DIODE 22-23 PLCC 24-25 XP1 LCC 26-27 XL1 SOIC 28-29 XS1 SOJ 30-31 XS1 FP 32-33 XF1 IC MSOP 34-35 XS1 SSOP 36-37 XS1 TSSOP 38-39 XS1 TSOP(I) 40-41 XO1 TSOP(II) 42-43 XO1 TQFP 44-45 LQFP 46-47 XQ1 Quad Flat Pack QFP 48-49 CERQUAD 50-51 XC1 Ceramic Quad Flat Pack CLCC 52-53 FC Flip Chips 54-55 XI1 Flip Chip FCW Flip Chip Wafers 56-57 Wafers 58-59 XE1 Wafers & Die Die 60-61 BGA - CSP 62-63 CBGA 64-65 XJ1 Grid Array CLGA - LGA 66-67 SLP, MLF, QFN 68-69 XU1 Leadless DIP 70-71 XN1 TO 72 XT1 Throughhole DO 73 XA1 ©2003 TopLine. All Rights Reserved. Updated March 14, 2003 1 TM Part Numbering System Quick Guide to Product Codes - “Pcode” Pcode Description Part Number Series (example) XA1 Axial Lead Component CF, CS, EA, DO (leaded only) XB1 Books, Catalog & Reference XC1 Ceramic CERQUAD CERQUAD and CLCC XD1 Chips, Passives & Discrete Semi SC, SD, SE, SI, SR, SRM, SOD, SOT, DPAK XE1 Wafers & Die WE, WED, WM, WMD and ED, MD XF1 Flat Packs FP XG1 Pin Grid Array PGA, PPGA, CPGA XH1 Ceramic DIP CERDIP XI1 Flip Chip FC, FCN, FCW, FCWN XJ1 Ball Grid Array & Land Grid Array BGA, CBGA, SBGA, LBGA, eBGA, fBGA, CSP, LGA, CLGA XK1 Kits, PC Boards, Gerber 900000 to 999999 series XL1 Ceramic Leadless Chip Carrier LCC XM0 Small Quantity Bulk Pack 100000 to 102999 series XM1 Small Reels of Components 227000 to 230000 series XN1 Plastic Dual Inline (DIP) DIP, SDIP XP1 Plastic
    [Show full text]
  • 2003 Catalog
    2003 Catalog HOW TO ORDER MasterCard VISA ® PAYMENT TERMS • Credit Terms (Net 30) for established customers. AMERICAN EXPRESS AMERICAN EXPRESS ® • American Express, Mastercard and VISA accepted. MasterCard CONFIRMING PURCHASE ORDERS AMERICAN EXPRESS • Confirming purchase orders are required for all orders over $500. MINIMUM PER ORDER • USA/Canada $50 minimum. • Export $1000. F.O.B. POINT AND SHIPPING • F.O.B. Garden Grove, California. Please specify preferred method of shipment when placing order. TM e-mail [email protected] www.topline.tv 7331A Garden Grove Blvd. Garden Grove, CA 92841 USA Toll Free USA/Canada 1-800-776-9888 Tel 1-714-898-3830 Fax 1-714-891-0321 © 2003. TopLine. All Rights Reserved This catalog, or any parts thereof, must not be reproduced in any form without written permission of TopLine. 1 February 2003 72dpi TM Find It Fast SERIES DESCRIPTION VIEW WEBCODE PAGE SC Ceramic Chip Capacitor 7 SD Molded Tantalum XD1 8 SE Aluminum Capacitor 9 SR Resistor Chip 10 SRM Melf Resistor XD1 11 SRA Resistor Array 12 Top SI InductorLine XD1 13 SERIES DESCRIPTION VIEW WEBCODE PAGE SOT Transistor XD1 14 DPAK Power Discrete XD1 15 SOD, SM Melf Diode/Rectifier XD1 16 SMA~SMC Rectangular Diode/Rectifier XD1 17 2 TM Find It Fast SERIES DESCRIPTION VIEW WEBCODE PAGE PLCC Chip Carrier XP1 18 T M LCC Chip Carrier XL1 19 M SOIC Gull WingT 20 e Lin Top SOJ J-Lead XS1 21 T o p L in FP Flat Packe XF1 22 MSOP Mini Small Outline Package XS1 23 M T SSOP Shrink Small Outline Package XS1 24 TSSOP Thin Shrink Outline Package XS1 25 TSOP Type 1 XO1 26
    [Show full text]
  • Passive Smd Tantalum Capacitors Aluminum
    SOD Small Outline Diode PASSIVE SMD TANTALUM CAPACITORS ALUMINUM CAPACITORS Top Side Surface Mount Device - 2 Terminal SOD-723 Top Side 1.4 × 0.6 × 0.59 mm Rectangular Passive Components 3.3 mm × 3.3 mm 0805 EIA 2012-12 SOD-523 (mostly resistors and capacitors) 2.0 mm × 1.3 mm × 1.2 mm 4.3 mm × 4.3 mm 1.25 × 0.85 × 0.65 mm 01005 SOD-323 (SC-90) 0.4 mm x 0.2 mm TANT - A Cannot be placed 5.3 mm × 5.3 mm 1.7 × 1.25 × 0.95 mm by some assembly 1206 EIA 3216-10 0201 manufacturers. 3.2 mm × 1.6 mm × 1.0 mm SOD-128 0.6 mm x 0.3 mm 6.6 mm × 6.6 mm 5 × 2.7 × 1.1 mm 1206 EIA 3216-12 0402 3.2 mm × 1.6 mm × 1.2 mm SOD-123 1.0 mm x 0.5 mm 3.68 × 1.17 × 1.60 mm 1206 EIA 3216-18 8.3 mm × 8.3 mm 0603 3.2 mm × 1.6 mm × 1.8 mm 1.6mm x 0.8 DO 0805 TANT - B 10.3 mm × 10.3 mm Diode Outline 2.0 mm × 1.25 mm 1411 EIA 3528-12 Top Side 3.5 mm × 2.8 mm × 1.2 mm 1008 DO-214AA (SMB) 2.5 mm × 2.0 mm 5.30 × 3.60 × 2.25 mm 1411 EIA 3528-21 13.0 mm × 13.0 mm 3.5 mm × 2.8 mm × 2.1 mm 1206 DO-214AB (SMC) 3.2 mm × 1.6 mm 7.95 × 5.90 × 2.25 mm TANT - C 1210 DO-214AC (SMA) 3.2 mm × 2.5 mm 2412 EIA 6032-15 13.5 mm × 13.5 mm 6.0 mm × 3.2 mm × 1.5 mm 5.20 × 2.60 × 2.15 mm 1806 4.5 mm × 1.6 mm 2412 EIA 6032-28 6.0 mm × 3.2 mm × 2.8 mm MELF 1812 17.0 mm × 17.0 mm Metal Electrode Leadless Face 4.5 mm × 3.2 mm TANT - D Top Side 2010 2917 EIA 7343-20 5.0 mm × 2.5 mm 7.3 mm × 4.3 mm × 2.0 mm MicroMelf (MMU) 0102 2.2 mm x 1.1 mm x 1.1 mm 2512 2917 EIA 7343-31 6.4 mm × 3.2 mm 7.3 mm × 4.3 mm × 3.1 mm 19.0 mm × 19.0 mm MiniMelf (MMA) 0204 3.6 mm x 1.4 mm x 1.4mm 2920 2917 EIA 7343-43 7.4 mm × 5.1 mm 7.3 mm × 4.3 mm × 4.3 mm Melf (MMB) 0207 5.8 mm x 2.2 mm x 2.2 mm *This reference covers standard package sizes.
    [Show full text]
  • SMD (Surface Mount Device)
    SMD (Surface Mount Device) SMD (Surface Mount Device) เปนอุปกรณที่มีขนาดเล็ก มีลักษณะ เปนขาแบบแบนเรียบ ไมสามารถเสียบ ลงรูของลายวงจร จะใชวิธีการหลอม ตะกั่วใหติดกับลายวงจรพิมพ ประเภทของ SMD แบงออกเปน 2 ประเภทใหญๆ คือ อุปกรณ SMD แบบพาสซีฟ อุปกรณ SMD แบบแอกทีฟ อุปกรณแบบพาสซีฟ เปนอุปกรณที่ไมสามารถขยายกําลัง สัญญาณได บางครั้งยังอาจทําใหเกิด การสูญเสียกําลังในรูปของพลังงาน ความรอนอีกดวย นั่นก็หมายความวา อุปกรณชนิดนี้จะมีอัตราการขยาย กําลังไมเกิน 1 เทา ไดแก ตัวตานทาน ตัวเหน่ยวนี ํา และตัวเก็บประจุ อุปกรณ SMD แบบพาสซีฟ อุปกรณ SMD แบบพาสซีฟที่ใช ในอุตสาหกรรมอิเล็กทรอนิกส เชน ตัว ตานทานแบบชิป, ตัวเก็บประจุแบบชิป, ตัวเก็บประจุแทนทาลัม และ อุปกรณแบบ MELF ตัวตานทานแบบชิป (Chip resistors) ลกษณะของตั ัวถังและโคดรหัสความตานทาน ตัวอยาง การนําเอา ตัวตานทานแบบชิป ไปใชงานในวงจร อิเล็กทรอนิกส ตัวตานทานแบบช ิป (Chip resistors) ตัวตานทานแบบชปทิ ี่ใชกันในอุตสาหกรรม อิเล็กทรอนิกสโดยทวไปแบั่ งออกเปน 2 ชนดิ 1. ชนิดฟลมหนา (Thick film) THICK FILM PACKAGING THICK FILM CHIP ARRAYS โครงสรางพื้นฐานของตัวตานทานแบบชิป แสดงขนาดของตัวตานทานแบบชิป ตามมาตรฐานของตามมาตรฐานของ EIAEIA ISIS ––3030 อัตราทนกําลังไฟฟา(Power rating) ของตัวตานทานแบบชิปที่มีจําหนาย ในทองตลาดจะมีคา 1/16 วัตต, 1/10 วัตต,1/8 วัตต และ 1/4 วัตต และ มีคาความตานทานอยูในชวงตั้งแต 1 โอหมไปจนถึง 100 เมกะโอหม ขนาดของตัวตานทานแบบชิป ตัวเก็บประจุแบบชิป (Chip capacitors) Tantalum Capacitor Chip SMD Electrolytic Capacitor SMD Chip Capacitor Ceramic Chip Capacitor-SMD ตัวเก็บประจุแบบชิป (Chip capacitors) ตัวเก็บประจุแบบชิปเปนอุปกรณที่เหมาะในการนํามาใชงานกับ วงจรความถี่สูงมากเปนพิเศษ เนื่องจาก ไมมีขาและยังสามารถ ถูกติดตั้งใหอยูใกลกับอุปกรณอิเล็กทรอนิกสความเร็วสูงไดงาย
    [Show full text]
  • The PCB Library Expert Solution PCB Libraries, Inc
    The PCB Library Expert Solution PCB Libraries, Inc. Updated 2012.07.01 What’s YOUR Problem? Changing customer or manufacturing requirements Companies with multiple CAD tools and have different formats with various levels of quality Companies outdated/obsolete libraries Migrate to an IPC compliant library Transition from Inch to Metric Apply consistency to libraries Touched by many different people with various skills Built using many different rules Created over many years CAD library is poor quality and needs overhaul Reduce a long term project to several days The Library Expert PCB Library Solution PCB Libraries, Inc. FREE demo/training - www.PCBLibraries.com/Training Who the PCB Library Expert Benefits Large companies who use multiple CAD tools and want the same library quality in every CAD format Companies who need to replace or upgrade their entire library Migrate to an IPC compliant library, or transition Inch to Metric Apply consistency to libraries: footprints and 3D models Touched by many different people with various skills Built using many different rules Created over many years CAD library is poor quality and needs overhaul Reduce a long term project to several days Companies who need flexibility to easily reconstruct an entire PCB library with totally different rules based on future needs The Library Expert PCB Library Solution PCB Libraries, Inc. FREE demo/training - www.PCBLibraries.com/Training PCB Library Expert The Library Expert PCB Library Solution PCB Libraries, Inc. FREE demo/training - www.PCBLibraries.com/Training PCB Library Expert - Levels Level I – FREE Browse and quality control component data Build one part at a time (does not safe preferences or component data) Level II – Component Data Search, modify, and save to “FPX data files” with the Librarian feature Level III – CAD Ouput Output component FPX data to any major CAD format The Library Expert PCB Library Solution PCB Libraries, Inc.
    [Show full text]
  • ESA-TECMSP-RS-014795 Issue/Revision 1.0 Date of Issue 23/08/2019 Status Approved
    ESA UNCLASSIFIED - For Official Use estec European Space Research and Technology Centre Keplerlaan 1 2201 AZ Noordwijk The Netherlands T +31 (0)71 565 6565 F +31 (0)71 565 6040 www.esa.int REQUIREMENT DOCUMENT / SPECIFICATION (SYSTEM, SUBSYSTEM, UNIT, EQUIPMENT LEVEL) High reliability assembly for surface mount and through hole connections Prepared by Ana Brandao ESA Reference ESA-TECMSP-RS-014795 Issue/Revision 1.0 Date of Issue 23/08/2019 Status Approved ESA UNCLASSIFIED - For Official Use APPROVAL Title High reliability assembly for surface mount and through hole connections Issue Number 1 Revision Number 0 Author Ana Brandao (TEC-MSP) Date 23/08/2019 Approved By Thomas Rohr (TEC-MSP) Date of Approval CHANGE LOG Reason for change Issue Nr. Revision Number Date CHANGE RECORD Issue Number 1 Revision Number 0 Reason for change Date Pages Paragraph(s) DISTRIBUTION Name/Organisational Unit Page 2/219 High reliability assembly for surface mount and through hole connections Issue Date 23/08/2019 Ref ESA-TECMSP-RS-014795 ESA UNCLASSIFIED - For Official Use Table of contents Change log .................................................................................................................. 3 Table of contents ........................................................................................................ 4 Introduction ............................................................................................................... 16 1 Scope .....................................................................................................................
    [Show full text]
  • Board Assembly Recommendations (Gullwing)
    Recommendations for Board Assembly of Infineon Packages with Dual Row Gullwing Leads Additional Information Please read the Important Notice and Warnings at the end of this document Revision 5.0 www.infineon.com page 1 of 24 2020-11-12 Recommendations for Board Assembly of Infineon Packages with Dual Row Gullwing Leads Table of Contents Table of Contents Table of Contents ........................................................................................................................... 2 Acronyms and Abbreviations ........................................................................................................... 3 1 Package Description ............................................................................................................... 5 1.1 Dual Row SO Package Type .................................................................................................................... 5 1.2 Diode and Transistor Package Type ....................................................................................................... 6 1.3 Top-Side Cooling Package Type ............................................................................................................. 7 1.5 Package Features and General Handling Guidelines ............................................................................. 8 2 Printed Circuit Board ............................................................................................................. 11 2.1 Routing .................................................................................................................................................
    [Show full text]