Ultima Gas Monitor and Toxgard II Gas Monitor Applications 07-0002

Total Page：16

File Type：pdf, Size：1020Kb

Ultima Gas Monitor and Toxgard II Gas Monitor Applications 07-0002

Ultima® Gas Monitor and Toxgard® II Gas Monitor Applications This list contains all target gases that have been found to be detectable with the Ultima Gas Monitor and/or the Toxgard II Gas Monitor to date. Gases listed may not be detectable with both monitors. If your application is not listed, please inquire with the MSA Sales Department at 1-(800)-MSA-INST to have your application evaluated. Allyl Chloride Isoprene Oxygen & Ammonia 0-50% LEL Isopropanol Amyl Alcohol JP-4 Toxic Gases Benzene MAPP Gas Butadiene, 1, 3 MEK (% by volume & ppm) Butane (iso) Methane Butane (n) Methanol Ammonia 0-50 ppm Butanol (iso) Methyl Acetate Arsine 0-2 ppm Butanol (n) Methyl Cellosolve Bromine 0-5 ppm Butene-1 Methyl Chloride Carbon Dioxide IR 0-2% Butene-2 Methyl Ethyl Ketone Carbon Monoxide 0-100 ppm Butyl Acetate (n) Methyl Formate Carbon Monoxide 0-500 ppm Butyl Acrylate Methyl Isoamyl Ketone Carbon Monoxide 0-1000 ppm Butylene Methyl Isobutyl Carbinol Chlorine 0-5 ppm Butyraldehyde Methyl Isobutyl Ketone Chlorine Dioxide 0-3 ppm Carbon Monoxide Methyl Methacrylate Diborane 0-50 ppm Cellosolve Methyl Propene (2) Ethylene Oxide 0-10 ppm Chlorobenzene Methyl t-Butyl Ether Fluorine 0-10 ppm Cumene Methylene Chloride Germane 0-3 ppm Cyclohexane Monomethyl Amine Hydrogen 0-1000 ppm Cyclohexanone Naphtha, VM&P Hydrogen Chloride 0-50 ppm Cyclopentane Ethyl Acetate Hydrogen Cyanide 0-50 ppm Cymene Octane (iso) Hydrogen Sulfide 0-10 ppm Di isopropylamine Pentane (iso) Hydrogen Sulfide 0-100 ppm Diethylamine Pentane (n) Hydrogen Sulfide 0-50 ppm Dimethoxyethane Pentene Nitric Oxide 0-100 ppm Dimethyl Ether Propane Nitrogen Dioxide 0-10 ppm Dioxane, 1, 4 Propanol (iso) Oxygen 0-10% Epichlorohydrin Propanol (n) Oxygen 0-25% Ethane Propyl Acetate Phosphine 0-2 ppm Ethanol Propylene Silane 0-25 ppm Ether, Diethyl Propylene Oxide Sulfur Dioxide 0-25 ppm Ether, Dimethyl Stoddard Solvent Ethyl Acrylate Styrene Ethyl Benzene Tetrahydrofuran Ethylene Toluene Combustible Ethylene Dichloride 1, 1, 1-Trichloroethane Ethylene Oxide Trichloroethylene Gases - %LEL Freon 152A Triethylamine Gasoline Trigonox B Acetaldehyde Heptane Turpentine Acetic Acid Hexane Vinyl Acetate Acetone Hexene Vinyl Chloride Acetylene Hydrogen Xylene Acrolein Isobutane Acrylonitrile Isobutanol Instrument Division: P.O. Box 427, Pittsburgh, PA 15230 U.S.A. www.MSAnet.com Data Sheet A-07-0002 © MSA 2001 Printed in U.S.A. 0111(L).

Copy Link

Recommended publications

MAPP GAS No Information Is Available, the Space Must Be Marked to Indicate That
Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA’s Hazard Communication Standard (Non-Mandatory Form) 29 CFR 1910.1200. Standard must be Form Approved consulted for specific requirements. OMB No. 1218-0072 Identity (As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or MAPP GAS no information is available, the space must be marked to indicate that. SECTION 1 Supplier’s Name Emergency Telephone Number Bernz-O-matic 585-798-4949 Address Telephone Number for Information Number, Street, City, State and ZIP Code 585-798-4949 Date Prepared One BernzOmatic Drive January 01, 2003 Medina, NY 14103 Signature of Preparer (Optional) SECTION II - Hazardous Ingredients / Identity Information Hazardous Components Other Limits Specific Chemical Identity, Common Name(s) OSHA PEL ACGIH TLV Recommended % (optional) Liquefied Petroleum Gas w/ Methylacetylene N/A N/A N/A Liquefied Petroleum Gas CAS NO. 68476-85-7 1000PPM 56.0 Methyl Acetylene-Propadiene CAS NO. 56960-91-9 1000PPM 44.0 NFPA HAZARD RATINGS HMIS RATINGS Health -2 Health -0 Flammability -4 Flammability -4 Reactivity -2 Reactivity -2 Notes SECTION III - Physical / Chemical Characteristics Boiling Point Specific Gravity (H20 - 1) -54º F to -10º F 0.571 Vapor Pressure (mm Hg) Melting Point @ 70º F 97 psig N/A Vapor Density (AIR=1) Evaporation Rate 1.48 Butyl Acetate -1) N/A Solubility in Water Slight Appearance and Odor Colorless - unpleasant odor at approx. 100ppm SECTION IV - Fire and Explosion Hazard Data Flash Point (Method Used) Flammable Limits LEL UEL Closed Cup -156º FIn air by volume 3.0 11.0 Extinguishing Media Eliminate oxygen source or stop flow of gas.
[Show full text]
MAPP GAS (Petroleum Gas, MAPD)
Material Safety Data Sheet MAPP GAS (Petroleum Gas, MAPD) Section 1. Chemical product and company identification Product name : MAPP GAS (Petroleum Gas, MAPD) Supplier : AIRGAS INC., on behalf of its subsidiaries 259 North Radnor-Chester Road Suite 100 Radnor, PA 19087-5283 1-610-687-5253 Product use : Synthetic/Analytical chemistry. Synonym : MAP,MAPP,Methyacetylene-Propadiene, Mixture of Methylacetylene and Propadiene MSDS # : 002015 Date of : 4/29/2010. Preparation/Revision In case of emergency : 1-866-734-3438 Section 2. Hazards identification Physical state : Gas. Emergency overview : DANGER! FLAMMABLE GAS. MAY CAUSE FLASH FIRE. CONTAINS MATERIAL THAT CAN CAUSE TARGET ORGAN DAMAGE. CONTENTS UNDER PRESSURE. Keep away from heat, sparks and flame. Do not puncture or incinerate container. Contains material that can cause target organ damage. Use only with adequate ventilation. Keep container closed. Contact with rapidly expanding gases can cause frostbite. Target organs : Contains material which causes damage to the following organs: upper respiratory tract, skin, eyes. Contains material which may cause damage to the following organs: the nervous system, central nervous system (CNS). Routes of entry : Inhalation Potential acute health effects Eyes : Liquid or cold gas may cause frostbites. Skin : Liquid or cold gas may cause frostbites. Inhalation : Acts as a simple asphyxiant. Ingestion : Ingestion is not a normal route of exposure for gases Potential chronic health : Not applicable effects Medical conditions : Pre-existing disorders involving any target organs mentioned in this MSDS as being at aggravated by over- risk may be aggravated by over-exposure to this product. exposure See toxicological information (section 11) Section 3. Composition, Information on Ingredients Name CAS number % Volume Exposure limits Build 1.1 Page: 1/8 MAPP GAS (Petroleum Gas, MAPD) Propylene 115-07-1 40 - 50 ACGIH TLV (United States, 1/2009).
[Show full text]
MAPP GAS No Information Is Available, the Space Must Be Marked to Indicate That
Material Safety Data Sheet May be used to comply with OSHA’s Hazard Communication Standard 29 CFR 1910.1200. Standard must be consulted for specific requirements. Identity (As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or MAPP GAS no information is available, the space must be marked to indicate that. SECTION 1 Supplier's Name Emergency Telephone Number Global Refrigerants (S) Pte Ltd +65-68633983 Address Telephone Number for Information N umber, Street, City, State and ZIP Code +65-68633983 Date Prepared 9 Tuas Link 1, Singapore 638587 August 10, 2008 Signature of Preparer (Optional) SECTION II - Hazardous Ingredients / Identity Information Hazardous Components Other Limits Specific Chemical Identity, Common Name(s) OSHA PEL ACGIH TLV Recommended % (optional) Propane CAS NO. 74-98-6 N/A N/A N/A N/A Propene CAS NO. 115-07-1 N/A N/A Dimethyl Ether CAS NO. 115-10-6 N/A N/A NFPA HAZARD RATINGS HMIS RATINGS Health -2 Health -0 Flammability -4 Flammability -4 Reactivity -2 Reactivity -2 Notes SECTION III - Physical / Chemical Characteristics Boiling Point Specific Gravity (H20 - 1) -54º F to -10º F 0.571 Vapor Pressure (mm Hg) Melting Point @ 70º F 97 psig N/A Vapor Density (AIR=1) Evaporation Rate 1.48 Butyl Acetate -1) N/A Solubility in Water Slight Appearance and Odor Colorless - unpleasant odor at approx. 100ppm SECTION IV - Fire and Explosion Hazard Data Flash Point (Method Used) Flammable Limits LEL UEL Closed Cup -156º F In air by volume 3.0 11.0 Extinguishing Media Eliminate oxygen source or stop flow of gas.
[Show full text]
Fundamentals of Gas Cutting and Welding
Fundamentals of Gas Cutting and Welding Course No: D06-002 Credit: 6 PDH A. Bhatia Continuing Education and Development, Inc. 22 Stonewall Court Woodcliff Lake, NJ 07677 P: (877) 322-5800 [email protected] FUNDAMENTALS OF GAS WELDING & CUTTING GAS WELDING AND CUTTING Oxy-fuel welding, commonly referred to as oxy welding or gas welding is a process of joining metals by application of heat created by gas flame. The fuel gas commonly acetylene, when mixed with proper proportion of oxygen in a mixing chamber of welding torch, produces a very hot flame of about 5700-5800°F. With this flame it is possible to bring any of the so-called commercial metals, namely: cast iron, steel, copper, and aluminum, to a molten state and cause a fusion of two pieces of like metals in such a manner that the point of fusion will very closely approach the strength of the metal fused. If more metal of like nature is added, the union is made even stronger than the original. This method is called oxy-acetylene welding. Cutting with the oxy-fuel process is just the opposite from of welding. Oxy-fuel cutting uses acetylene and oxygen to preheat metal to red hot and then uses pure oxygen to burn away the preheated metal. Because this is achieved by oxidation, it is only effective on metals that are easily oxidized at this temperature. Such metals are mild steel and low allow steels. Oxy-fuel cutting can be used to cut thicknesses from 2/8″ to up to 12″. Traditionally oxy-fuel processes are used for brazing, fusion welding, flame hardening, metalizing, soldering, stress relieving, cutting and bending.
[Show full text]
Liquified Petroleum Gases
Revised on 10/08/15 FIRE DEPARTMENT ● CITY OF NEW YORK STUDY MATERIAL FOR THE CERTIFICATE OF FITNESS EXAMINATION FOR G-24 USE OF LPG/CNG IN EMERGENCY INDOOR REPAIR I FIRE DEPARTMENT ● CITY OF NEW YORK The new LPG and CNG tests are listed below. Applicants who apply any of the following tests need to read the new study material: Use of LPG/CNG in Powered Industrial Truck Operations (G-22) on page 1-28 and 46-49 Use of LPG/CNG at Outdoors Events and Mobile Cooking (G-23) on page 1-28 and 40-43 Use of LPG/CNG in Emergency Indoor Repair (G-24) on page 1-28 and 50 Use of LPG in Hot-Air Balloon (G-34) on page 1-28 and 51 Use of LPG/CNG in Manhole Operations (G-36) on page 1-28 and 44-45 Storage, Use and Handling Use of LPG/CNG for Tar Kettles, Asphalt Melter and Marking Street Line (G-40) on page 1-28 & page 34-39 Storage and Handling of LPG/CNG (G-44) on page 1-33 The relationship between the previous C of Fs and the new C of Fs: Previous C of Fs New C of Fs For curing heating: S-92 For manhole heating: G-36 Use of LPG in Heating Devices (G-96) For mobile cooking: G-23 For heating device in roofing or street repair: G-40 Use of LPG in HI-LO (Forklifts) (G-22) Use of LPG/CNG in Powered Industrial Truck Operations (G-22) Fuel at Outdoors Events (G-23) Use of LPG/CNG at Outdoors Events and Mobile Cooking (G-23) Use of LPG in Emergency Repairs (G-96) Use of LPG/CNG in Emergency Indoor Repairs (G-24) Use of LPG in Mobile Units (G-96) Use of LPG/CNG at Outdoors Events and Mobile Cooking (G-23) Use of LPG for Concrete Drying (G-27) Portable Fueled
[Show full text]
Hsl/2006/121
Harpur Hill, Buxton Derbyshire, SK17 9JN T: +44 (0)1298 218000 F: +44 (0)1298 218590 W: www.hsl.gov.uk The Behaviour of 'Bernzomatic' MAPP and Propane Cartridges When Exposed to Heat and Flame HSL/2006/121 Project Leader: J E Fletcher Author(s): J E Fletcher Science Group: Hazard Reduction © Crown copyright (2006) CONTENTS 1 INTRODUCTION......................................................................................... 1 2 BACKGROUND INFORMATION................................................................ 2 3 EXPERIMENTAL ........................................................................................ 5 3.1 Test Program........................................................................................... 5 3.2 Test Cartridges ........................................................................................ 5 3.3 Test series A, Non-uniform heating, diffuse flame ................................... 6 3.4 Test series B, Uniform heating in a Waterbath ........................................ 7 3.5 Test series C, Non-uniform intense heating, pre-mixed flame ................. 8 3.6 Test series D, Single cylinders in the open.............................................. 8 3.7 Test series E, Multiple cylinders, pool fire................................................ 8 4 RESULTS ................................................................................................. 10 4.1 Test series A, Non-uniform heating, diffuse flame ................................. 10 4.2 Test series B, Uniform heating in a waterbath
[Show full text]
MAPP Gas MSDS Safety Data Sheet
SAFETY DATA SHEET MAPP GAS (Petroleum Gas, MAPD) Section 1. Identification GHS product identifier : MAPP GAS (Petroleum Gas, MAPD) Other means of : MAP,MAPP,Methyacetylene-Propadiene, Mixture of Methylacetylene and Propadiene identification Product use : Synthetic/Analytical chemistry. Synonym : MAP,MAPP,Methyacetylene-Propadiene, Mixture of Methylacetylene and Propadiene SDS # : 002015 Supplier's details : Airgas USA, LLC and its affiliates 259 North Radnor-Chester Road Suite 100 Radnor, PA 19087-5283 1-610-687-5253 Emergency telephone : 1-866-734-3438 number (with hours of operation) Section 2. Hazards identification OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Classification of the : FLAMMABLE GASES - Category 1 substance or mixture GASES UNDER PRESSURE - Liquefied gas SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Category 3 GHS label elements Hazard pictograms : Signal word : Danger Hazard statements : Extremely flammable gas. Contains gas under pressure; may explode if heated. May cause frostbite. May displace oxygen and cause rapid suffocation. May cause drowsiness and dizziness. Precautionary statements General : Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use. Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction. Always keep container in upright position. Approach suspected leak area with caution. Prevention : Never Put cylinders into unventilated areas of passenger vehicles.
[Show full text]
Bernzomatic NFPA 4 2 2 HMIS
Bernzomatic HMIS NFPA HEALTH 0 Mapp Gas 4 FIRE 4 2 2 REACTIVITY 2 PPE SECTION 1 : Chemical Product and Company Identification MSDS Name: Mapp Gas Manufacturer Name: Bernzomatic Manufacturer MSDS Revision Date: June 11, 2008 NFPA Health: 2 Flammability: 4 Reactivity: 2 Other: HMIS Health Hazard: 0 Fire Hazard: 4 Reactivity: 2 Personal Protection: Distributor Name: Bernzomatic Distributor Address: One BernzOmatic Drive Medina, NY 14103 Emergency Telephone Number: 585-798-4949 Distributor Telephone: 585-798-4949 Material Safety Data Sheet May be used to comply with OSHA’s Hazard Communication Standard 29 CFR 1910.1200. Standard must be consulted for specific requirements. U.S. Department of Labor Occupational Safety and Health Administration (Non-Mandatory Form) Form Approved OMB No. 1218-0072 Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that. JMB - 3 Product Codes: SECTION 2 : Hazardous Ingredients/Identity Information Chemical Name Liquefied Petroleum Gas w/Methylacetylene OSHA PEL TWA: Not applicable ACGIH TLV TWA: Not applicable Other Exposure Guidelines: Other Limits Recommended: Not applicable Common Name: Liquefied Petroleum Gas w/Methylacetylene Chemical Name CAS# Percent Liquefied Petroleum Gas 68476-85-7 (Optional): 56.0% OSHA PEL TWA: 1000 ppm Common Name: Liquefied Petroleum Gas Chemical Name CAS# Percent Methyl Acetylene- 56960-91-9 (Optional): 44.0% Propadiene OSHA PEL TWA: 1000 ppm Common Name: Methyl Acetylene-Propadiene NFPA HAZARD RATINGS: Health - 2 Flammability - 4 Reactivity - 2 HMIS RATINGS: Health - 0 Flammability - 4 Reactivity - 2 SECTION 3 : Physical And Chemical Characteristics Color: Colorless Odor: Unpleasant odor at approx.
[Show full text]
Adiabatic Process Lecture Vocabulary
Inovace bakalářského studijního oboru Aplikovaná chemie Reg. č.: CZ.1.07/2.2.00/15.0247 Introduction to Physical Chemistry Lecture 5 • Thermodynamics – thermodynamic systems, processes and states – state variables – mechanical work of gas – adiabatic process Lecture vocabulary: mechanical work of gas mechanická práce plynu certain určitý region oblast universe vesmír notional hypotetický , teoretický delimiting vy mezující surroundings okolí environment okolí, prostředí reservoir rezervoár, tepelná lázeň experimentally accessible experimentálně dostupný internal energy vnitřní energie displace zaujmout místo force field silové pole solely vý hradně, jedině mass flow tok hmoty reversible x irreversible vratný x nevratný sign znaménko sign convention znaménková konvence expansion expanze, rozpínání compression komprese, stlačení external vnější at the expense na účet, na úkor (čeho) work obtained získaná práce shaft work shaft=hřídel, jiné označení pro mechanickou práci plynu cylinder válec diminish snížit se net celkový thermally insulated tepelně izolovaný heat exchange vý měna tepla steeper strmější denoted as označován jako stoichiometric stechiometrický equilibrium rovnováha intake sání combustion spalování, hoření exhaust vý fuk Thermodynamic systems, states and processes •Thermodynamic system is a certain boundary macroscopic region of universe •Thermodynamic system is separated by real or system notional boundary delimiting the system volume •The space outside the thermodynamic system is surroundings known as the surroundings, the environment, or a reservoir. The state of the system is characterised by a set of thermodynamic parameters the values of which are experimentally accessible macroscopic properties, such as volume, pressure, temperature, electric field etc. Processes: System type Mass flow Work Heat Isobaric · Isochoric · Isothermal Open YES YES YES Adiabatic · Isoentropic · Isoenthalpic Closed NO YES YES Isolated NO NO NO Quasistatic · Polytropic Reversible vs.
[Show full text]
INSTRUCTION MANUAL OXY-MAP Torches
INSTRUCTION MANUAL OXY-MAP Torches Models: OX2550KC | WK5500OX DANGER EXTREMELY FLAMMABLE GASES USED WITH TORCH FIRE/EXPLOSION HAZARD CARBON MONOXIDE HAZARD This Oxygen Cutting and Welding Torch is unlike most hand held torches. It is designed to be used simultaneously with an oxygen cylinder and a MAP-Pro™ or propane cylinder. The use of an oxygen cylinder results in the torch flame burning at much higher temperatures as it would without an oxygen cylinder. Do not use this torch until you become thoroughly familiar with its proper use and potential hazards. In particular, you MUST NOT attempt to ignite the torch while oxygen is flowing to the torch. Further, when turning the torch off Always TURN OFF THE OXYGEN BEFORE TURNING OFF THE FUEL GAS. Turning off the fuel gas while oxygen is still flowing could result in a flash back and an explosion. READ AND FOLLOW the instructions and warnings in this manual. Familiarize yourself with the torch before lighting and using. Review instructions and warnings periodically to maintain awareness. Do not try to operate before reading instructions and without being thoroughly familiar with this torch’s use and potential hazards. Failure to comply with these instructions and warnings may result in damage to property, serious personal injury, or death. DANGER This Torch uses MAPP GAS, MAP-Pro™ or Propane Fuel and Oxygen in pressurized cylinders. These gases are EXTREMELY FLAMMABLE. • READ AND FOLLOW all warnings and instructions on cylinder labels. • Keep the fuel and oxygen cylinders away from heat or flame. • Store fuel and oxygen cylinders in well-ventilated areas.
[Show full text]
Liquefied Petroleum Gas with Methyl Acetylene- Propadiene
MATERIAL SAFETY DATA SHEET PRODUCT NAME: LIQUEFIED PETROLEUM GAS WITH METHYL ACETYLENE- PROPADIENE 1. Product and Company Identification BOC Gases, BOC Gases Division of, Division of, The BOC Group, Inc. BOC Canada Limited 575 Mountain Avenue 5975 Falbourne Street, Unit 2 Murray Hill, NJ 07974 Mississauga, Ontario L5R 3W6 TELEPHONE NUMBER: (908) 464-8100 TELEPHONE NUMBER: (905) 501-1700 24-HOUR EMERGENCY TELEPHONE NUMBER: 24-HOUR EMERGENCY TELEPHONE NUMBER: CHEMTREC (800) 424-9300 (905) 501-0802 EMERGENCY RESPONSE PLAN NO: 2-0101 PRODUCT NAME: LIQUEFIED PETROLEUM GAS WITH METHYL ACETYLENE-PROPADIENE CHEMICAL NAME: Liquefied Petroleum Gas with Methyl Acetylene-Propadiene COMMON NAMES/SYNONYMS: LPG - MAPP(R) Mixture; MAPP(R) - LPG Mixture; Methyl Acetylene- Propadiene (MAPP(R)) Mixture With LPG TDG (Canada) CLASSIFICATION: 2.1 WHMIS CLASSIFICATION: A, B1 PREPARED BY: Loss Control (908)464-8100/(905)501-1700 PREPARATION DATE: 6/1/95 REVIEW DATES: 07/16/04 2. Composition, Information on Ingredients EXPOSURE LIMITS1: 2 3 INGREDIENT % VOLUME PEL-OSHA TLV-ACGIH LD50 or LC50 Route/Species Liquefied Petroleum Gas 56.0 1000 ppm TWA 1000 ppm TWA Not Available FORMULA: Mixture CAS: 68476-85-7 RTECS #: SE7545000 Methyl Acetylene – Propadiene 44.0 1000 ppm TWA 1000 ppm TWA Not Available FORMULA: Mixture 1250 ppm STEL CAS: 59355-75-8 RTECS #: UK4920000 1 Refer to individual state or provincial regulations, as applicable, for limits which may be more stringent than those listed here. 2 As stated in 29 CFR 1910, Subpart Z (revised July 1, 1993) 3 As stated in the ACGIH 2004 Threshold Limit Values for Chemical Substances and Physical Agents.
[Show full text]
Material Safety Data Sheet MAPP GAS (Petroleum Gas, MAPD)
Material Safety Data Sheet MAPP GAS (Petroleum Gas, MAPD) Section 1. Chemical product and company identification Product Name : MAPP GAS (Petroleum Gas, MAPD) Supplier : AIRGAS INC., on behalf of its subsidiaries 259 North Radnor-Chester Road Suite 100 Radnor, PA 19087-5283 1-610-687-5253 Product use : Synthetic/Analytical chemistry. Synonym : MAP,MAPP,Methyacetylene-Propadiene, Mixture of Methylacetylene and Propadiene MSDS# : 002015 Date of : 7/30/2007. Preparation/Revision In case of emergency : 1-866-734-3438 Section 2. Hazards identification Physical state : Gas. Emergency overview : Warning! FLAMMABLE GAS. CONTENTS UNDER PRESSURE. VAPOR MAY CAUSE FLASH FIRE. Keep away from heat, sparks and flame. Do not puncture or incinerate container. Keep container closed. Use only with adequate ventilation. Contact with rapidly expanding gases can cause frostbite. Routes of entry : Inhalation Potential acute health effects Eyes : Liquid or cold gas may cause frostbites. Skin : Liquid or cold gas may cause frostbites. Inhalation : Acts as a simple asphyxiant. Ingestion : Ingestion is not a normal route of exposure for gases Potential chronic health : Not applicable effects Medical conditions : A knowledge of the available toxicology information and of the physical and chemical aggravated by overexposure properties of the material suggests that over exposure is unlikely to aggravate existing medical conditions. See toxicological Information (section 11) Section 3. Composition, Information on Ingredients Name CAS number % Volume Exposure limits Propylene 115-07-1 40 - 50 ACGIH TLV (United States, 1/2005). TWA: 500 ppm 8 hour(s). Form: All forms Methyl Acetylene 74-99-7 27 - 33 ACGIH TLV (United States, 1/2005). TWA: 1640 mg/m 3 8 hour(s).
[Show full text]