DOCSLIB.ORG

Nonlinear Dynamical Control Systems Henk Nijmeijer • Arjan Van Der Schaft

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nonlinear Dynamical Control Systems Henk Nijmeijer • Arjan Van Der Schaft Nonlinear Dynamical Control Systems Henk Nijmeijer • Arjan van der Schaft Nonlinear Dynamical Control Systems 123 Henk Nijmeijer Arjan van der Schaft Eindhoven University of Technology University of Groningen Eindhoven Groningen The Netherlands The Netherlands ISBN 978-0-387-97234-3 ISBN 978-1-4757-2101-0 (eBook) DOI 10.1007/978-1-4757-2101-0 © Springer Science+Business Media New York 1990, Corrected printing 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by SpringerNature The registered company is Springer Science+Business Media LLC New York Preface This textbook on the differential geometric approach to nonlinear control grew out of a set of lecture notes, which were prepared for a course on nonlinear system theory, given by us for the first time during the fall semester of 1988. The audience consisted mostly of graduate students, taking part in the Dutch national Graduate Program on Systems and Control. The aim of this course is to give a general introduction to modern nonlinear control theory (with an emphasis on the differential geometric approach), as well as to provide students specializing in nonlinear control theory with a firm starting point for doing research in this area. One of our primary objectives was to give a self-contained treatment of all the topics to be included. Since the literature on nonlinear geometric control theory is rapidly expanding this forced us to limit ourselves in the choice of topics. The task of selecting topics was further aggravated by the continual shift in emphasis in the nonlinear control literature over the last years. Therefore, we decided to concentrate on some rather solid and clear-cut achievements of modern nonlinear control, which can be expected to be of remaining interest in the near future. Needless to say, there is also a personal bias in the topics we have finally selected. Furthermore, it was impossible not to be influenced by the trendsetting book “Nonlinear Control Systems: an Introduction”, written by A. Isidori in 1985 (Lecture Notes in Control and Information Sciences, 72, Springer). A second main goal was to illustrate the theory presented with examples stem- ming from various fields of application. As a result, Chapter 1 starts with a discus- sion of some characteristic examples of nonlinear control systems, which will serve as illustration throughout the subsequent chapters, besides several other examples. Thirdly, we decided to include a rather extensive and self-contained treatment of the necessary mathematical background on differential geometry. Especially the required theory on Lie brackets, (co-)distributions and Frobenius’ Theorem is cov- ered in detail. However, some rudimentary knowledge about the fundamentals of differential geometry (manifolds, tangent space, vectorfields) will greatly facilitate the reading of the book. Furthermore, the reader is supposed to be familiar with the basic concepts of linear system theory; especially some acquaintance with linear geometric control theory will be very helpful. v vi Preface Modern nonlinear control theory, in particular the differential geometric ap- proach, has emerged during the seventies in a rather successful attempt to deal with basic questions in the state space formulation of nonlinear control systems, including the problems of controllability and observability, and (minimal) realization theory. It was also motivated by optimal control theory, in particular the Maximum Principle and its relation with controllability issues. The theory gained strong impetus at the end of the seventies and beginning of the eighties by the introduction of several new concepts, most of them having as their crucial part nonlinear feedback. Let us illus- trate this with two papers, which can be seen as benchmarks in this development. First, there is the paper by Brockett on “Feedback invariants for nonlinear systems” (Proc. VIIth IFAC World Congress, Helsinki, pp. 1115-1120, 1978), which deals with the basic question to what extent the structure of a nonlinear control system can be changed by (static state) feedback. A direct outgrowth of this paper has been the theory on feedback linearization of nonlinear control systems. Secondly, in the paper “Nonlinear decoupling via feedback: a differential geometric approach” by Isidori, Krener, Gori-Giorgi & Monaco (IEEE Trans. Automat. Control, AC-26, pp. 341-345, 1981) the concept of a controlled invariant distribution is used for vari- ous sorts of decoupling problems (independently, a similar approach was taken by Hirschorn (“(A,B)-invariant distributions and disturbance decoupling of nonlinear systems”, SIAM J. Contr. Optimiz. 19, pp. 1-19, 1981)). It is worth mentioning that the concept of a controlled invariant distribution is a nonlinear generalization of the concept of a controlled invariant subspace, which is the cornerstone in what is usu- ally called linear geometric control theory (see the trendsetting book of Wonham, “Linear Multivariable Control”, Springer, first edition 1974, third edition 1985). In fact, a substantial part of the research on nonlinear control theory in the eighties has been involved with the “translation” to the nonlinear domain of solutions of various feedback synthesis problems obtained in linear geometric control theory. Connected with the concept of (controlled) invariant distributions, the above mentioned IEEE paper also stressed the usefulness of special choices of state space coordinates, in which the system structure becomes more transparent. The search for various kinds of nonlinear normal forms, usually connected to some algorithm such as the nonlin- ear D∗-algorithm, the Hirschorn algorithm or the dynamic extension algorithm, has been another major trend in the eighties. At this moment it is difficult to say what will be the prevailing trends in nonlinear control theory in the near future. Without doubt the feedback stabilization problem, which has recently obtained a strong renewed interest, will be a fruitful area. Also adaptive control of nonlinear systems, or, more modestly, the search for adaptive versions of current nonlinear control schemes is likely going to be very important, as well as digital implementation (discretization) of (continuous-time based) con- trol strategies. Moreover, it seems that nonlinear control theory is at a point in its development where more attention should be paid to the special (physical) structure of some classes of nonlinear control systems, notably in connection with classical notions of passivity, stability and symmetry, and notions stemming from bifurcation theory and dynamical systems. Preface vii The contents of the book are organized as follows: Chapter 1 starts with an exposition of four examples of nonlinear control systems, which will be used as illustration for the theory through the rest of the book. A few generalities concerning the definition of nonlinear control systems in state space form are briefly discussed, and some typical phenomena occurring in nonlinear dif- ferential (or difference) equations are touched upon, in order to put the study of nonlinear control systems also into the perspective of nonlinear dynamics. Chapter 2 provides the necessary differential geometric background for the rest of the book. Section 2.1 deals with some fundamentals of differential geometry, while in Section 2.2 vectorfields, Lie brackets, (co-)distributions and Frobenius’ Theorem are treated in some detail. For the reader’s convenience we have included a quick survey of Section 2.1, as well as a short summary of Section 2.2 containing a list of useful properties and identities. In Chapter 3 some aspects of controllability and observ- ability are treated with an emphasis on nonlinear rank conditions that generalize the well-known Kalman rank conditions for controllability and observability of linear systems, and on the role of invariant distributions in obtaining local decompositions similar to the linear Kalman decompositions. Chapter 4 is concerned with various input-output representations of nonlinear control systems, and thus provides a link with a more input-output oriented approach to nonlinear control systems, without actually going into this. Conditions for invariance of an output under a particular input, which will be crucial for the theory of decoupling in later chapters, are de- rived in the analytic as well as in the smooth case. In Chapter 5 we discuss some problems concerning the transformation
Load more

Recommended publications
  • Basic Nonlinear Control Systems - D
    CONTROL SYSTEMS, ROBOTICS, AND AUTOMATION – Vol. III – Basic Nonlinear Control Systems - D. P. Atherton BASIC NONLINEAR CONTROL SYSTEMS D. P. Atherton University of Sussex, UK Keywords: Nonlinearity, friction, saturation, relay, backlash, frequency response, describing function, limit cycle, stability, phase plane, subharmonics, chaos, synchronization, compensation. Contents 1. Introduction 2. Forms of nonlinearity 3. Structure and behavior 4. Stability 5. Aspects of design 6. Conclusions Glossary Bibliography Biographical Sketch Summary This section is written to introduce the reader to nonlinearity and its effect in control systems, and also to ‘set the stage’ for the subsequent articles. Nonlinearity is first defined and then some of the physical effects which cause nonlinear behavior are discussed. This is followed by some comments on the stability of nonlinear systems, the existence of limit cycles, and the unique behavioral aspects which nonlinear feedback systems may possess. Finally a few brief comments are made on designing controllers for nonlinear systems. 1. Introduction Linear systems have the important property that they satisfy the superposition principle. This leads to many important advantages in methods for their analysis. For example, in circuit theory when an RLC circuit has both d.c and a.c input voltages, the voltage or current elsewhereUNESCO in the circuit can be– found EOLSS by summing the results of separate analyses for the d.c. and a.c. inputs taken individually, also if the magnitude of the a.c. voltage is doubledSAMPLE then the a.c. voltages or CHAPTERScurrents elsewhere in the circuit will be doubled. Thus, mathematically a linear system with input x()t and output yt() satisfies the property that the output for an input ax12() t+ bx () t is ay12() t+ by () t , if y1()t and y2 ()t are the outputs in response to the inputs x1()t and x2 ()t , respectively, and a and b are constants.
    [Show full text]
  • Neural Control for Nonlinear Dynamic Systems
    Neural Control for Nonlinear Dynamic Systems Ssu-Hsin Yu Anuradha M. Annaswamy Department of Mechanical Engineering Department of Mechanical Engineering Massachusetts Institute of Technology Massachusetts Institute of Technology Cambridge, MA 02139 Cambridge, MA 02139 Email: [email protected] Email: [email protected] Abstract A neural network based approach is presented for controlling two distinct types of nonlinear systems. The first corresponds to nonlinear systems with parametric uncertainties where the parameters occur nonlinearly. The second corresponds to systems for which stabilizing control struc­ tures cannot be determined. The proposed neural controllers are shown to result in closed-loop system stability under certain conditions. 1 INTRODUCTION The problem that we address here is the control of general nonlinear dynamic systems in the presence of uncertainties. Suppose the nonlinear dynamic system is described as x= f(x , u , 0) , y = h(x, u, 0) where u denotes an external input, y is the output, x is the state, and 0 is the parameter which represents constant quantities in the system. The control objectives are to stabilize the system in the presence of disturbances and to ensure that reference trajectories can be tracked accurately, with minimum delay. While uncertainties can be classified in many different ways, we focus here on two scenarios. One occurs because the changes in the environment and operating conditions introduce uncertainties in the system parameter O. As a result, control objectives such as regulation and tracking, which may be realizable using a continuous function u = J'(x, 0) cannot be achieved since o is unknown. Another class of problems arises due to the complexity of the nonlinear function f.
    [Show full text]
  • Control Theory
    Control theory S. Simrock DESY, Hamburg, Germany Abstract In engineering and mathematics, control theory deals with the behaviour of dynamical systems. The desired output of a system is called the reference. When one or more output variables of a system need to follow a certain ref- erence over time, a controller manipulates the inputs to a system to obtain the desired effect on the output of the system. Rapid advances in digital system technology have radically altered the control design options. It has become routinely practicable to design very complicated digital controllers and to carry out the extensive calculations required for their design. These advances in im- plementation and design capability can be obtained at low cost because of the widespread availability of inexpensive and powerful digital processing plat- forms and high-speed analog IO devices. 1 Introduction The emphasis of this tutorial on control theory is on the design of digital controls to achieve good dy- namic response and small errors while using signals that are sampled in time and quantized in amplitude. Both transform (classical control) and state-space (modern control) methods are described and applied to illustrative examples. The transform methods emphasized are the root-locus method of Evans and fre- quency response. The state-space methods developed are the technique of pole assignment augmented by an estimator (observer) and optimal quadratic-loss control. The optimal control problems use the steady-state constant gain solution. Other topics covered are system identification and non-linear control. System identification is a general term to describe mathematical tools and algorithms that build dynamical models from measured data.
    [Show full text]
  • Fundamentals of Backstepping Control
    Appendix Fundamentals of Backstepping Control This Appendix provides the fundamentals of the recursive backstepping control method. The presented material is a summary of more detailed descriptions that may be found in [43, 49]. Lyapunov-based controller design may be systematically tack- led by a recursive design procedure called backstepping. Backstepping is suitable for strict-feedback systems that are also known as “lower triangular”. An example of a strict-feedback systems is: ˙ ξ1 = f1(ξ1) + g1(ξ1)ξ2 ˙ ξ2 = f2(ξ1,ξ2) + g2(ξ1,ξ2)ξ3 . (A.1) ˙ ξr−1 = fr−1(ξ1,ξ2,...,ξr−1) + gr−1(ξ1,ξ2,...,ξr−1)ξr ˙ ξr = fr (ξ1,ξ2,...,ξr ) + gr (ξ1,ξ2,...,ξr )u where ξ1,...,ξr ∈ R, u ∈ R is the control input and fi , gi for i = 1,...,r are known functions. A typical feedback linearization approach in most cases leads to cancellation of useful nonlinearities. The backstepping design exhibits more flexi- bility compared to feedback linearization since it does not require that the resulting input–output dynamics be linear. Cancellation of potentially useful nonlinearities can be avoided resulting in less complex controllers. The main idea is to use some of the state variables of (A.1) as “virtual controls” or “pseudo controls”, and de- pending on the dynamics of each state, design intermediate control laws. The back- stepping design is a recursive procedure where a Lyapunov function is derived for the entire system. The recursive procedure can be easily expanded from the nominal case of a system augmented by an integrator. This is also referred to as integra- tor backstepping.
    [Show full text]
  • Nonlinear Control - an Overview
    1 NONLINEAR CONTROL - AN OVERVIEW Fernando Lobo Pereira, fl[email protected] Porto University, Portugal Nonlinear Control, 2008, FEUP References 1 M. Vidyasagar, Nonlinear Systems Analysis, Prentice-Hall, Englewood Cli®s, NJ, 1978. 2 A. Isidori, Nonlinear Control Systems, Springer-Verlag, 199X. 3 E. Sontag, Mathematical Control Theory: Deterministic Finite Dimensional Systems, Springer-Verlag, 1998. 4 C. T. Chen, Introduction to Linear Systems Theory, Van Nostrand Reinhold Company, New York, NY, 1970. 5 C. A. Desoer, Notes for a Second Course on Linear Systems, Holt Rhinehart, Winston, 1970. 6 K. Ogata, State Space Analysis of Control Systems, Prentice-Hall, Englewood Cli®s, NJ, 1965. 7 J. M. Carvalho, Dynamical Systems and Automatic Control, Prentice-Hall, New York, NY, 1994. Fernando Lobo Pereira, fl[email protected] 1 Nonlinear Control, 2008, FEUP Introduction Problem description - system components, objectives and control issues. Example 1: telescope mirrors control PICTURE Most of real systems involve nonlinearities in one way or another. However, many concepts for linear systems play an important role since some of the techniques to deal with nonlinear systems are: ² Change of variable in phase space so that the resulting system is linear. ² Nonlinearities may be cancelled by picking up appropriate feedback control laws. ² Pervasive analogy ... Fernando Lobo Pereira, fl[email protected] 2 Nonlinear Control, 2008, FEUP Introduction Example 2: Pendulum Modeling PICTURE Dynamics (Newton's law for rotating objects): mθÄ(t) + mgsin(θ(t)) = u(t) State variables: θ; θ_ Control/Input variable: u (external applied torque) Let us assume m = 1; l = 1; g = 1. Fernando Lobo Pereira, fl[email protected] 3 Nonlinear Control, 2008, FEUP Introduction Control Design ½ (0; 0) stable equilibrium Stationary positions: (1) (¼; 0) unstable equilibrium.
    [Show full text]
  • Modeling, Control and Simulation of Control-Affine Nonlinear Systems with State-Dependent Transfer Functions
    New Jersey Institute of Technology Digital Commons @ NJIT Dissertations Electronic Theses and Dissertations Spring 5-31-2014 Modeling, control and simulation of control-affine nonlinear systems with state-dependent transfer functions Roger Kobla Kwadzogah New Jersey Institute of Technology Follow this and additional works at: https://digitalcommons.njit.edu/dissertations Part of the Electrical and Electronics Commons Recommended Citation Kwadzogah, Roger Kobla, "Modeling, control and simulation of control-affine nonlinear systems with state-dependent transfer functions" (2014). Dissertations. 164. https://digitalcommons.njit.edu/dissertations/164 This Dissertation is brought to you for free and open access by the Electronic Theses and Dissertations at Digital Commons @ NJIT. It has been accepted for inclusion in Dissertations by an authorized administrator of Digital Commons @ NJIT. For more information, please contact [email protected]. Copyright Warning & Restrictions The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material. Under certain conditions specified in the law, libraries and archives are authorized to furnish a photocopy or other reproduction. One of these specified conditions is that the photocopy or reproduction is not to be “used for any purpose other than private study, scholarship, or research.” If a, user makes a request for, or later uses, a photocopy or reproduction for purposes in excess of “fair use” that user may be
    [Show full text]
  • Nonlinear Control of Underactuated Mechanical Systems with Application to Robotics and Aerospace Vehicles
    Nonlinear Control of Underactuated Mechanical Systems with Application to Robotics and Aerospace Vehicles by Reza Olfati-Saber Submitted to the Department of Electrical Engineering and Computer Science in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Electrical Engineering and Computer Science at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY February 2001 © Massachusetts Institute of Technology 2001. All rights reserved. Author ................................................... Department of Electrical Engineering and Computer Science January 15, 2000 C ertified by.......................................................... Alexandre Megretski, Associate Professor of Electrical Engineering Thesis Supervisor Accepted by............................................ Arthur C. Smith Chairman, Department Committee on Graduate Students Nonlinear Control of Underactuated Mechanical Systems with Application to Robotics and Aerospace Vehicles by Reza Olfati-Saber Submitted to the Department of Electrical Engineering and Computer Science on January 15, 2000, in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Electrical Engineering and Computer Science Abstract This thesis is devoted to nonlinear control, reduction, and classification of underac- tuated mechanical systems. Underactuated systems are mechanical control systems with fewer controls than the number of configuration variables. Control of underactu- ated systems is currently an active field of research due to their broad applications in Robotics, Aerospace Vehicles, and Marine Vehicles. The examples of underactuated systems include flexible-link robots, nobile robots, walking robots, robots on mo- bile platforms, cars, locomotive systems, snake-type and swimming robots, acrobatic robots, aircraft, spacecraft, helicopters, satellites, surface vessels, and underwater ve- hicles. Based on recent surveys, control of general underactuated systems is a major open problem. Almost all real-life mechanical systems possess kinetic symmetry properties, i.e.
    [Show full text]
  • Nonlinear Control Via Input-Output Feedback Linearization of a Robot Manipulator
    Advances in Science, Technology and Engineering Systems Journal Vol. 3, No. 5, 374-381(2018) ASTESJ www.astesj.com ISSN: 2415-6698 NonLinear Control via Input-Output Feedback Linearization of a Robot Manipulator Wafa Ghozlane*, Jilani Knani Laboratory of Automatic Research LA.R.A, Department of Electrical Engineering, National School of Engineers of Tunis ENIT, University of Tunis ElManar, 1002 Tunis, Tunisia. A R T I C L E I N F O A B S T R A C T Article history: This paper presents the input-output feedback linearization and decoupling algorithm for Received: 08 September, 2018 control of nonlinear Multi-input Multi-output MIMO systems. The studied analysis was Accepted: 13 October, 2018 motivated through its application to a robot manipulator with six degrees of freedom. The Online: 18 October, 2018 nonlinear MIMO system was transformed into six independent single-input single-output SISO linear local systems. We added PD linear controller to each subsystem for purposes Keywords: of stabilization and tracking reference trajectories, the obtained results in different Input-Output Feedback simulations shown that this technique has been successfully implemented. linearization Nonlinear system Robot manipulator MIMO nonlinear system SISO linear systems PD controller 1. Introduction the angular position of each joint of this robot arm for stabilization and tracking purposes. The obtained results in different In recent years, Feedback linearization has been attracted a simulations shown the efficiency of the derived approach [7]. great deal of interesting research. It's an approach designed to the nonlinear control systems, which based on the idea of This paper is organized as follows: It is divided into five transforming nonlinear dynamics into a linear form.
    [Show full text]
  • Design of Terminal Sliding Mode Controllers for Disturbed Non-Linear Systems Described by Matrix Differential Equations of the Second and First Orders
    applied sciences Article Design of Terminal Sliding Mode Controllers for Disturbed Non-Linear Systems Described by Matrix Differential Equations of the Second and First Orders Paweł Skruch * and Marek Długosz Department of Automatic Control and Robotics, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland; [email protected] * Correspondence: [email protected] Received: 2 February 2019; Accepted: 1 June 2019; Published: 6 June 2019 Abstract: This paper describes a design scheme for terminal sliding mode controllers of certain types of non-linear dynamical systems. Two classes of such systems are considered: the dynamic behavior of the first class of systems is described by non-linear second-order matrix differential equations, and the other class is described by non-linear first-order matrix differential equations. These two classes of non-linear systems are not completely disjointed, and are, therefore, investigated together; however, they are certainly not equivalent. In both cases, the systems experience unknown disturbances which are considered bounded. Sliding surfaces are defined by equations combining the state of the system and the expected trajectory. The control laws are drawn to force the system trajectory from an initial condition to the defined sliding surface in finite time. After reaching the sliding surface, the system trajectory remains on it. The effectiveness of the approaches proposed is verified by a few computer simulation examples. Keywords: non-linear dynamical system; disturbance; sliding mode control; sliding surface 1. Introduction 1.1. Motivation Stabilization of non-linear systems finds applications in many areas of engineering, particularly in the fields of mechanics, robotics, electronics, and so on [1,2].
    [Show full text]
  • Neural Networks for Control
    Neural Networks for Control Martin T. Hagan School of Electrical & Computer Engineering Oklahoma State University [email protected] Howard B. Demuth Electrical Engineering Department University of Idaho [email protected] Abstract the inverse of a system we are trying to control, in which case the neural network can be used to imple- The purpose of this tutorial is to provide a quick ment the controller. At the end of this tutorial we overview of neural networks and to explain how they will present several control architectures demon- can be used in control systems. We introduce the strating a variety of uses for function approximator multilayer perceptron neural network and describe neural networks. how it can be used for function approximation. The backpropagation algorithm (including its variations) Output is the principal procedure for training multilayer Unknown perceptrons; it is briefly described here. Care must Function - be taken, when training perceptron networks, to en- Input Error sure that they do not overfit the training data and then fail to generalize well in new situations. Several Neural + techniques for improving generalization are dis- Network cused. The tutorial also presents several control ar- Predicted Adaptation chitectures, such as model reference adaptive Output control, model predictive control, and internal model control, in which multilayer perceptron neural net- works can be used as basic building blocks. Figure 1 Neural Network as Function Approximator In the next section we will present the multilayer 1. Introduction perceptron neural network, and will demonstrate In this tutorial we want to give a brief introduction how it can be used as a function approximator.
    [Show full text]
  • Sliding Mode Control of Constrained Nonlinear Systems
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Archivio istituzionale della ricerca - Politecnico di Milano 1 Sliding Mode Control of Constrained Nonlinear Systems chattering reduction is not the only possible purpose of HOSM, since this latter allows the use of a relative degree greater than one between Gian Paolo Incremona, Matteo Rubagotti, and Antonella Ferrara the discontinuous control input and the sliding variable. In the first-order SMC formulation, input saturations are imme- diately satisfied if the control variable switches between values Abstract—This technical note introduces the design of sliding mode control algorithms for nonlinear systems in the presence of hard inequal- that are inside the imposed boundaries. When HOSM is used for ity constraints on both control and state variables. Relying on general chattering reduction, specific solutions have been proposed to achieve results on minimum-time higher-order sliding mode for unconstrained the satisfaction of saturation constraints (see, e.g., [19], [20] for the systems, a general order control law is formulated to robustly steer the second-order case). On the other hand, the possible presence of state state to the origin, while satisfying all the imposed constraints. Results on minimum-time convergence to the sliding manifold, as well as on the constraints is usually not taken into account in SMC formulations. maximization of the domain of attraction, are analytically proved for Recently, few solutions have been proposed in order to merge SMC the first-order and second-order sliding mode cases. A general result is and MPC, and combine the constraints satisfaction property of MPC presented regarding the domain of attraction in the general order case, with the robustness of SMC [21]–[25].
    [Show full text]
  • Slotine • Li APPLIED NONLINEAR CONTROL
    Slotine • Li APPLIED NONLINEAR CONTROL ! i APPLIED NONLINEAR CONTROL Jean-Jacques E Slotine Weiping Li Applied Nonlinear Control JEAN-JACQUES E. SLOTINE Massachusetts Institute of Technology WEIPING LI Massachusetts Institute of Technology' Prentice Hall Englewood Cliffs, New Jersey 07632 Library of Congress Cataloging-in-Publication Data Slotine, J.-J. E. (Jean-Jacques E.) Applied nonlinear control / Jean-Jacques E. Slotine, Weiping Li p. cm. Includes bibliographical references. ISBN 0-13-040890-5 1, Nonlinear control theory. I. Li, Weiping. II. Title. QA402.35.S56 1991 90-33365 629.8'312-dc20 C1P Editorial/production supervision and interior design: JENNIFER WENZEL Cover design: KAREN STEPHENS Manufacturing Buyer: LORI BULWIN =^= © 1991 by Prentice-Hall, Inc. ^=&= A Division of Simon & Schuster T k Englewood Cliffs, New Jersey 07632 All rights reserved. No part of this book may be reproduced, in any form or by any means, without permission in writing from the publisher. Printed in the United States of America 20 19 18 17 16 15 14 13 12 1] ISBN D-13-DHDfiTa-S Prentice-Hall International (UK) Limited, London Prentice-Hall of Australia Pty. Limited, Sydney Prentice-Hall Canada Inc., Toronto Prentice-Hail Hispanoamericana, S.A., Mexico Prentice-Hall of India Private Limited, New Delhi Prentice-Hall of Japan, Inc., Tokyo Simon & Schuster Asia Pte. Ltd., Singapore Editora Prentice-Hall do Brasil, Ltda., Rio de Janeiro To Our Parents Contents Preface xi 1. Introduction 1 1.1 Why Nonlinear Control ? 1 1.2 Nonlinear System Behavior 4 1.3 An Overview of the Book 12 1.4 Notes and References 13 Part I: Nonlinear Systems Analysis 14 Introduction to Part I 14 2.
    [Show full text]