DOCSLIB.ORG

Instruction Booklet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Instruction Booklet TM INSTRUCTION BOOKLET CuisinartTM Electric Wine Opener CWO-50C For your safety and continued enjoyment of this product, always read the instruction book carefully before using. 5. To protect against fire, do 13. Do not attempt to open the 19. Children should always IMPORTANT not operate the unit in the electric wine opener or the be supervised to ensure presence of explosive and/ charging base. They have that they do not play with SAFEGUARDS or flammable fumes. no user-serviceable parts. this product. When using electrical 6. Do not use the electric Charge the electric wine 20. Do not place the appliance appliances, basic safety wine opener for other than opener only by using the on or near a hot gas or precautions should always be its intended use. charging base and power electric burner or in a taken, including the following: 7. This product is intended cord supplied. heated oven. for normal domestic 14. Never remove the plug 21. Do not operate your 1. READ ALL household use only. from the socket by pulling appliance in an appliance INSTRUCTIONS. 8. When using or charging the power adapter. garage or under a wall 2. Remove all packaging the electric wine opener, 15. Use of attachments not cabinet. When storing materials and any keep your workspace clean recommended or sold by in an appliance garage, promotional labels or and free from potential Waring may cause fire, always unplug the unit stickers from the appliance hazards. electric shock, injury or from the electrical outlet. before first use. Do not 9. For indoor use only. Do not damage to the product. Not doing so could create allow children access expose the electric wine 16. Do not use any a risk of fire, especially if to the plastic packaging opener or charging base accessories or the appliance touches the bags. to rain or other extreme attachments with this walls of the garage or the door touches the unit as it 3. Do not operate appliance conditions. appliance other than closes. with a damaged cord or 10. Never force the electric those recommended by plug, after the appliance wine opener onto a bottle Cuisinart. Use only the CAUTION: Corkscrew is malfunctions or if it or attempt to speed up the power adapter supplied sharp. Handle carefully. Keep has been dropped or mechanism. The electric with this product. hands and utensils out of the damaged in any manner. wine opener will work best 17. Do not let cord hang over container while operating to Return appliance to when it is operated at its edge of table or counter or prevent the possibility of severe the nearest Authorized intended speed. touch hot surfaces. personal injury and/or damage to the product or property. Service Center for 11. Do not touch or adjust 18. This appliance should examination, repair or the electric wine opener’s not be used by adults SAVE THESE electrical or mechanical mechanism or the or children whose lack adjustment, or phone corkscrew spiral. Hold the of experience, product ® INSTRUCTIONS Cuisinart Customer electric wine opener by its knowledge or disability Service at 800 472-7606. housing only. might cause a hazard, FOR HOUSE- 4. To protect against risk of 12. Do not attempt to open unless they have been electric shock, do not put bottles if the switch is not correctly instructed and HOLD USE the electric appliance in working correctly. are adequately supervised. water or other liquids. This ONLY may cause personal injury and/or damage to the product. 1 2 Before you use this product for OPERATING Foil Cutter the first time, please take a few For your convenience, this unit moments to read these instructions. INSTRUCTIONS has a foil cutter, which can be Keep them for future reference. Connection and Use stored in the base of the unit. Before removing the cork, you This appliance is for 120 volts PARTS must remove foil to expose top only and should not be used part of cork surface (see fig 1). 1. Wine opener with a converter. Attach foil a. REMOVE switch – We recommend that you charge cutter to the Press to remove the cork from bottle your electric wine opener for at top of the 1b least twelve hours before using wine bottle. b. EJECT switch – for the first time. Please follow Keep hand Press to eject the instructions for charging as on lower cork from opener stated below: part of bottle (fig. 1) 1a 2. Charge indicator light and turn 3. Charging base Charging Your Electric foil cutter in twisting motion Wine Opener to remove foil. Remove foil to 4. Foil cutter expose top part of cork surface. 5. Power adapter 1 Plug one end of the power adapter into the back of CAUTION: Blade on foil cutter the charging base and the is sharp. Please keep fingers other end into an electrical away from cutter's sharp outlet. Place the electric wine edges. 4 opener into the charging base, making sure that it is firmly To Operate Your in position and that it is fully Wine Opener engaged with the charging Press the REMOVE switch connection. The blue indicator to remove the cork from the light will illuminate. It will bottle. After the cork has been take approximately 12 hours 5 removed from the to charge your electric wine bottle, press the opener. The charging light will EJECT switch to remain blue during the charging release the cork process, even when fully from the wine charged. opener (see fig. 2). Your wine opener can open 3 1. Place the wine (fig. 2) approximately 50 bottles of opener on top of wine on a full charge. the wine bottle, making sure that it remains as straight/ 2 upright as possible at all 3 4 times. If you hold the electric CLEANING AND If the appliance should become defective wine opener at an angle to WARRANTY within the warranty period, do not return the MAINTENANCE appliance to the store. Please contact our the bottle it will not remove Customer Service Centre: Always unplug the appliance LIMITED THREE-YEAR the cork properly. WARRANTY Toll-free phone number: from the electrical outlet 1-800-472-7606 before cleaning. We warrant that this Cuisinart product will be 2. Hold the wine free of defects in materials or workmanship Address: opener and bottle under normal home use for 3 years from the Cuisinart Canada Make sure all the parts are 100 Conair Parkway firmly. Press the clean and dry before storing. date of original purchase. This warranty REMOVE switch. covers manufacturer’s defects including Woodbridge, Ont. L4H 0L2 The corkscrew To clean housing, wipe with a mechanical and electrical defects. It does Email: not cover damage from consumer abuse, [email protected] spiral will turn in a clean, damp cloth. unauthorized repairs or modifications, theft, Model: counterclockwise misuse, or damage due to transportation Never immerse power adapter, CWO-50C direction and or environmental conditions. Products with charging base or housing in To facilitate the speed and accuracy of your enter the cork, removed or altered identification numbers will water or any other liquids. not be covered. return, please enclose: gradually removing (fig. 3) This warranty is not available to retailers or • $10.00 for shipping and handling of the it from the bottle. Never submerge the motor other commercial purchasers or owners. If product (cheque or money order) When the mechanism stops, base in water or other liquids, your Cuisinart product should prove to be • Return address and phone number the cork has been fully or place defective within the warranty period, we will • Description of the product defect repair it or replace it if necessary. For removed from the bottle in a dishwasher. • Product date code*/copy of original proof warranty purposes, please register your (see fig. 3). of purchase Any other servicing should be product online at www.cuisinart.ca to facilitate verification of the date of original purchase • Any other information pertinent to the 3. Lift the wine opener up and performed by an authorized and keep your original receipt for the duration product’s return away from the bottle. To service representative. of the limited warranty. This warranty excludes * Product date code can be found on the damage caused by accident, misuse or abuse, underside of the base of the product. The eject the cork, press the including damage caused by overheating, product date code is a 4 or 5 digit number. EJECT switch. The AFTER USE and it does not apply to scratches, stains, Example, 90630 would designate year, spiral will turn in discolouration or other damage to external month & day (2009, June 30th). We recommend that you return or internal surfaces that does not impair the a clockwise your appliance to the charging Note: We recommend you use a traceable, functional utility of the product. This warranty insured delivery service for added protection. direction and base so that it is fully charged also expressly excludes all incidental or release the cork Cuisinart will not be held responsible for and available for use at any consequential damages. in-transit damage or for packages that are from the wine time. Your Cuisinart product has been manufactured not delivered to us. opener (see fig. 4). (fig. 4) to the strictest specifications and has been To order replacement parts or accessories, designed for use only in 120 volt outlets and call our Customer Service Centre at 4. Always return the wine only with authorized accessories and 1-800-472-7606. For more information, replacement parts. This warranty expressly please visit our website at www.cuisinart.ca.
Load more

Recommended publications
  • Cardboard and Brown Paper Bags Office Paper, Newspaper, Junk Mail, Magazines, and Catalogs
    Recycling Center 801 Diamond Valley Drive Open: Daily to the public during daylight hours This guide will help you properly prepare your recyclable materials for drop-off at the Town of Windsor Recycle Center. This is a drop-off facility. It does not have a buy-back option and is for use by residents and small businesses. Following this information will help maintain the facility and the recycling program for the benefit of the community. IMPORTANT… • Do not leave your recyclables in plastic bags. Plastic bags are NOT recyclable! • The plastic item must be a BOTTLE or JAR. with a #1 or #2 on the bottom. • 99 percent of these will have a screw-on plastic lid (which isn’t recyclable). • Plastic containers with a #3 - #7 on the bottom are NOT acceptable. • Tubs, buckets, deli plates, microwave/fast food trays, wrappers, Styrofoam, toys, patio furniture, etc. are NOT acceptable. • Plastic bottles larger than 2.5 gallons are NOT acceptable. • Syringes and other medical supplies are NOT acceptable. Cardboard and Brown Paper Bags Corrugated cardboard is easy to recognize. It is made of paper and has an arched layer called “fluting” between smooth sheets called “liners”. The drop-off site has two 40-yard hydraulic compactor units for collecting corrugated cardboard and brown paper bags. The compaction system is self-activated by depositing the prepared materials into a six-inch tall slot. Flatten boxes. Cut or tear large boxes into sections no larger than 4 feet by 4 feet to prevent jamming the machine. No wet, waxed-coated or food-contaminated boxes.
    [Show full text]
  • Shrink Sleeve Labels on PET Containers APR Resource Document
    Document Number RES-LBL-2 Publication or Revision Date: 1/4/2021 Shrink Sleeve Labels on PET Containers APR Resource Document Introduction This Resource Document presents APR Guidance for characteristics of shrink sleeve labels for PET packaging that will have the most benefit for today’s PET container recycling processes, and that will have the most positive environmental impact in support of the plastics circular economy. Shrink sleeve labels have been developed that allow the label film and inks to have negligible impact on the quality or productivity of PET recycling. Such shrink sleeve labels are in commercial use today, but not yet used widely or routinely. The quality of recycled PET can be improved—to the benefit of all recycling and sustainability stakeholders—when recycling compatible labels become the standard for the PET packaging industry. The resources described herein can be helpful to each segment of the package supply chain: • Consumer brands can learn what comprises a recycling compatible shrink sleeve label and inform their label suppliers that they expect such technologies be offered to them; • Label suppliers can assure brands that PET packages using their products meet recyclability guidance by performing APR Test Methods to demonstrate this; • Converters and manufacturers who want to lead the industry in sustainability can use APR shrink sleeve label design guidance to develop and commercialize innovations that will benefit the entire packaging industry. This document is written to complement the APR Design® Guide for Plastics Recyclability by consolidating key shrink label guidance: https://plasticsrecycling.org/apr-design-guide/apr-design-guide-home The APR offers programs, such as Critical Guidance Recognition, that distinguish innovations that are demonstrated to be compatible with recycling: https://plasticsrecycling.org/recognition/programs This document contains four sections: 1.
    [Show full text]
  • WHEATON® Glass Bottles
    WHEATON® Glass Bottles WHEATON® Glass Bottles WHEATON offers a comprehensive line of glass laboratory bottles and jars. Glass bottles offer sample reliability and integrity, and is a mainstay of labs worldwide. WHEATON bottles are manufactured from USP Type III soda-lime glass with moderate chemical resistance. Popular bottle styles available include Media Bottles, Boston Rounds, Wide Mouth Packers, Straight Sided Jars and Safety Coated Bottles for enhanced laboratory protection. WHEATON completes the package with the right closure. We provide a variety of caps and seals to ensure a perfect fit for each container. WHEATON offers convenience bulk packs of containers with or without caps attached for high use items or facilities with centralized stockrooms. With safety in mind, Tamper Evident Seal / HAZCOM Labels are provided in each case of bottles with the exception of bulk packs. Product Highlights • Bottles manufactured from clear and amber USP Type III soda-lime glass • Wide mouth bottles are ideal for dry and viscous samples • White polypropylene or black phenolic screw closures can be • Amber colored glass is ideal for light sensitive products purchased separately • Narrow mouth bottles are ideal for liquids • Methods of sterilization: dry heat or EtO (not suitable for autoclave) • Safety coated glass prevents dangerous spills and control sharp fragments WHEATON® Glass Bottles French Square Valumetric™ Graduated Bottle Media Bottle, Lab 45 ■ Clear or Amber, USP Type III soda-lime glass ■ Clear, USP Type III soda-lime glass ■ Manufactured
    [Show full text]
  • Ész.AORNEY %2
    April 17, 1951 H. W. WILLIAMS 2,549,404 BOTTLE STOPPER Filed May 7, 1946 J& Z. 24 B 1. 2 2 L2 12 2YaaaZZYaz27.277 NWENOR AAPOZA M/ M/7// van/s BY 7 -ész.AORNEY %2. Patented Apr. 17, 1951 2,549,404 UNITED STATES PATENT of FICE 2,549,404 BOTTLE STOPPER Harold W. Williams, Pawling, N.Y. Application May 7, 1946, Serial No. 66,860 5 Claims. (C. 25-48) 2 The invention herein disclosed relates to a sufficient elasticity to conform to the neck of a bottle Stopper of the kind that includes a plug bottle in which it is inserted, and make a fluid portion that is adapted to be inserted in the neck tight fit therewith. Desirably, as illustrated, the of a bottle. Side wall of the plug makes a right angle with Bottle stoppers of the kind mentioned that are 5 the end wall. This provides the necessary rigid Commonly used include, in general, a cork plug. ity and prevents the plug from collapsing when and a WOOden end piece or cap glued or cemented inserted in the neck of a bottle. to the plug. Such bottle stoppers have many in There are several materials, moldable thermo herent and well known disadvantages, and var plastic materials, that are pliable at ordinary ious attempts have heretofore been made to pro O temperature and therefore suitable for the bottle duce a, bottle stopper of this kind to replace the stopger of this invention. One such material that cork Stopper. Except for the glass stopper, has been found especially suitable for the pur which has limited application because of its cost, pose is “Polythene.' This is a thermo-plastic none of these prior attempts have met with any material that is available on the open market and measure of success.
    [Show full text]
  • Packaging Influences on Olive Oil Quality: a Review of the Literature
    Report Packaging influences on olive oil quality: A review of the literature Selina Wang, PhD, Xueqi Li, Rayza Rodrigues and Dan Flynn August 2014 Copyright © 2014 UC Regents, Davis campus. All rights reserved. Photo: iStockphoto/danr13 Packaging influences on Olive Oil Quality – UC Davis Olive Center, August 2014 Packaging Influences on Olive Oil Quality: A Review of the Literature Extra virgin olive oil is a fresh juice extracted from olive fruits. As with other fruit juices, the freshness and flavor quality of olive oil diminish with time, and the rate of deterioration is influenced by packaging type. To maximize shelf stability, the ideal packaging material would prevent light and air penetration, and the oils would be stored in the dark at 16 – 18 °C (61 – 64 °F). Table 1 indicates how chemical components in olive oil influence the shelf life of the oil. Table 1. How chemical components in the oil can influence shelf life Chemical component Effect on the shelf life Fatty acid profile High level of polyunsaturated fats such as linoleic acid and linolenic acid shortens shelf life; high level of saturated fats such as stearic acid and palmitic acid helps to prolong shelf life. Free fatty acidity Free fatty acids promote oxidation and shorten shelf life. Peroxide value High level of peroxide value shortens shelf life. Trace metals Trace metals promote oxidation and shorten shelf life. Oxygen Oxygen promotes oxidation and shortens shelf life. Moisture Moisture promotes oxidation and shortens shelf life. Phenolic content Phenolics are antioxidants and help to prolong shelf life. While a high quality olive oil under ideal storage conditions can be stored for months, even years, without becoming rancid, oxidation ultimately will lead to rancid flavors and aromas.
    [Show full text]
  • Stars in a Sensory Bottle Activity
    UAMN Virtual Early Explorers: Solar System Stars in a Sensory Bottle Relax and imagine the solar system in a vast universe! Materials: Sturdy transparent plastic bottle or jar, glitter, sequins (star-shaped or round), heavy tape or glue. Liquid to fill bottle: • water and food coloring/ tempera paint (water- based) OR • mineral oil and candy decorating dye (oil-based) Instructions: Step 1: Clean your bottle or jar thoroughly to avoid growing mold. Step 2: Add glitter and sequins. Suggested quantity: 2-3 teaspoons for a 16-ounce bottle. Adjust to your preference. Step 3: Fill with your choice of liquid: water or mineral oil. In mineral oil (or baby oil), glitter will stay suspended longer than in water. Step 4: Dye your liquid with a blue color. If you used water, add a few drops of food coloring, liquid watercolor, or tempera paint. If you used mineral oil, use an oil-based dye, such as candy decorating colors, as water-based colors will not work in oil. Enjoy your sensory jar! Talk about our Solar System’s place in our galaxy and in the universe! UAMN Virtual Early Explorers: Solar System At Home in The Milky Way Discover the incredible vastness of our galaxy and beyond! Our Solar System has one star, the Sun. The Solar System and Sun are part of a galaxy: a huge collection of stars, gas, and dust. Our galaxy is called the Milky Way. Scientists estimate that there are between 100 and 400 billion stars just in the Milky Way! The universe contains billions of galaxies like this, each one full of stars.
    [Show full text]
  • DID YOU KNOW? PET (Polyethylene Terephthalate) Is Actually Polyester. When PET Is Used for Bottles, Containers and Other
    355 Lexington Ave., Suite 1500 ▪ New York, NY 10017 ▪ www.PETresin.org DID YOU KNOW? Little-Known Facts about PET Plastic . PET (polyethylene terephthalate) is actually polyester. When PET is used for bottles, containers and other applications, it is called PET or PET resin. When PET is used as a fiber, it is typically called polyester. The PET bottle was invented by Nathaniel C. Wyeth, a DuPont engineer and brother of American painter Andrew Wyeth. The patent was issued to Wyeth in 1973 and assigned to DuPont. According to the EPA, recycling one pound of PET bottles (that’s about 10 two-liter soda bottles) saves approximately 26,000 BTUs of energy. PET bottles and the sun are helping millions of people in developing countries obtain potable water. Using a system called SODIS (solar water disinfection), inhabitants set water-filled PET bottles in the sun for several hours or days – depending on how much sunlight is available – as a simple but effective means of destroying disease-causing bacteria and gaining safe drinking water. More than 1.5 billion pounds of used PET bottles and containers are collected in the U.S. each year for recycling. PET is the most recycled plastic in the U.S. and the world. A single-serve PET bottle (0.5 liter) is strong enough to hold 50 times its weight in water. Chemists keep finding new ways to make PET lighter without losing any strength. A 2-liter PET bottle that weighed 68 grams in 1980 now weighs as little as 42 grams. The average weight of single-serve 0.5 liter PET water bottle is now 9.9 grams, nearly half of what it weighed in 2000.
    [Show full text]
  • Plastic Bottles Today Innovating to Reach Today’S Consumer
    PLASTICS MARKET WATCH PLASTIC BOTTLES TODAY INNOVATING TO REACH TODAY’S CONSUMER BETTER INDUSTRY. BETTER WORLD. February 2017 The Plastics Industry Association (PLASTICS) sends special thanks to the Brand Owners, Processors and Equipment Councils, and Rigid Plastics Packaging Group (RPPG) for their guidance and input on this Bottling Plastics Market Watch Report. Materials were compiled, written and edited by William (Bill) Mashek, with editorial assistance from Kim Holmes, George Southworth, Kendra Martin and Ashley Stoney at PLASTICS. Copyright Plastics Industry Association. 02 Plastics Market Watch—Watching: Bottling Plastics Market Watch Plastic Bottles Today Innovating to Reach Today’s Consumer A series examining the business of plastics, including demographics, economics, policy developments and technological trends in specific plastics end markets. Contents 05 Forward 08 Introduction: Plastic Bottles Today— Innovating to Reach Today’s Consumer 11 Role of Plastics in Bottling 16 Growth of Plastics Bottling 20 Innovation 25 Plastic Bottle Economics 29 Bottling Equipment & Machinery 31 Recycling Progress 37 Conclusion 42 Plastic Bottle Glossary 49 Sources 52 Plastics Market Watch Snapshot Plastics Market Watch—Watching: Bottling 03 04 Plastics Market Watch—Watching: Bottling Forward The Plastics Industry Association’s (PLASTICS’) Plastics Market Watch reports provide forward-looking data and insights on key plastics industry end markets. The series examines the business of plastics, including demographics, economics, policy developments and technological improvements for markets including automotive and transportation, healthcare and medical devices, packaging, building and construction, automotive recycling, bioplastics and consumer electronics. Given the role that plastics play in today’s modern society, Plastics Market Watch reports offer a holistic picture of our technology—from beginning-of-life resins and polymers to end-of-life management and recycling efforts.
    [Show full text]
  • Amphora-Aged Cos Wine: New Or Ancient
    AMPHORA-AGED COS WINE: NEW OR ANCIENT There is something simply amazing to view a winery making its top wines in a series of earthenware jars. Is there shock-horror? Yes for a technocrat trained on the finer points of grades of stainless steel. But no for someone on a path of discovery to understand just what the practitioners do when there is a choice to return to the roots of winemaking practice. And the use of clay pots has been a natural winemaking event year-on-year in Georgia for as far back as 6000 years BC. Recently a colleague advised me that a 2012 trip to this old world winemaking country included a visit to a monastery using the clay pot containers continuously for 1000 years (a lot of vintages there to build up tartrate!) So I was recently on the path of discovery in Sicily to visit two famous properties using earthenware jars for winemaking and aging (COS in Vittoria) and Cornelissen (on Etna) who ages new wine similarly. There is a space in between with the technology path-that of using oak barrels as storage vessels, and over the past decade used, large (3-5,000 litre) format casks have proved to be valuable aging means for high quality wines. Casks displaced earthenware vessels as they were more practical. However keeping large casks fresh and clean is a never-ending job, and at times capable of going wrong (cask has to be burnt). Also the cask remains practical for making larger volumes of wine, while re-introducing the clay pot makes sense for small parcel winemaking as pot management is a lot simpler than in the 15th century.
    [Show full text]
  • Labeling Playbook HOW to SUCCESSFULLY IMPLEMENT LABELING PROJECTS
    2011 Edition packager’s playbook series education for packaging professionals Labeling Playbook HOW TO SUCCESSFULLY IMPLEMENT LABELING PROJECTS • Label design strategies • Material specification best practices • Machinery selection and implementation • Evaluation toolkits Sponsored by: Labeling Playbook CONTENTS 2 / 71 CONTRIBUTORS 4 Brand owners, consultants and design experts contributing to this playbook INTRODUCTION 6 Why the need for labels that deliver on shelf and across the value chain DESIGN 9 For great labels, know your consumer 16 Assemble a cross-functional team 20 Five steps to optimizing label design 24 Two ways to justify package design 27 Outsource or in-house? Six evaluation steps DEVELOPMENT 29 Latest labeling material trends 33 Label specification: Best practices in package development 38 Building labeling supplier relationships that foster innovation 40 How labeling projects fail Labeling Playbook CONTENTS 3 / 71 EQUIPMENT 42 Five labeling equipment trends 44 Seven best practices for buying labeling machinery 47 Vendor evaluation methodology for labeling equipment 49 Staffing a machinery project for success 51 Roadmap for a successful labeling factory acceptance test 54 Ten tips for a successful line start-up 57 Determining when to rebuild or replace a labeling machine 59 Financial justifications for labeling equipment 63 Four common pitfalls to avoid on label machinery projects GALLERY 65 Label Design Gallery — Selected examples of labeling innovation This playbook is proudly sponsored by: Labeling Playbook CONTRIBUTORS 4 / 71 The following brand owners, consultants and design experts contributed to this playbook: PAUL ZEPF JEFF GEORGE P.Eng., M.Eng., CPP Vice President of Research & Development Zarpac Inc. Sara Lee Corp. With nearly 40 years of packaging production experience, Zepf has written 14 books on packaging production technology and is a co-founder of Zarpac BRAD ROdgERS Inc., an engineering, software, and consulting firm.
    [Show full text]
  • Boston Round Glass Bottles
    Boston Round Glass Bottles Finneran Products Certifi ed For ScienceTM - Available in clear or amber glass - Choice of closure and liner - Available in standard, precleaned or precleaned/certifi ed in accordance with recommended E.P.A. Protocol CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried, and assembled in a contaminate-free environment. Th e exterior of each case is labeled with a lot number. Each case contains a copy of wash “Standard Operating Procedure.” CLASS 3: (Certifi ed) Containers are processed according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried and assembled in a contaminate-free environment. Th e exterior of each case is labeled with a lot number. Each case contains a “Certifi cate of Analysis.” An independent laboratory is used to certify the container’s cleanliness, assuring impartial results. Standard Assembled with White Polypropylene Closure, .015” PTFE Lined Clear Glass Boston Round Bottles - Class 1 Cat. No. Description Qty 9-170 1 oz, 30mL Clear Boston Round Bottle, 20-400mm Th read, White Closure, PTFE Lined 24 Pack 9-171 2 oz, 60mL Clear Boston Round Bottle, 20-400mm Th read, White Closure, PTFE Lined 24 Pack 9-172 4 oz, 125mL Clear Boston Round Bottle, 22-400mm Th read, White Closure, PTFE Lined 24 Pack 9-173 8 oz, 250mL Clear Boston Round Bottle, 24-400mm Th read, White Closure, PTFE Lined 12 Pack 9-174 16 oz, 500mL Clear Boston Round Bottle, 28-400mm Th read, White Closure, PTFE Lined 12 Pack 9-175 32 oz, 1000mL Clear Boston Round Bottle, 33-400mm Th read, White Closure, PTFE Lined 12 Pack Amber Glass Boston Round Bottles - Class 1 Cat.
    [Show full text]
  • Wine Club Jean Impey
    Wine Club designed exclusively for Hoffman Fabrics by Jean Impey Finished Size: 37.5” x 23” Fabric Requirements 1895 311-Lake 1895 227-Sprout a 1/8 Yard g 1/4 Yard (background - 5 blocks) (3 bottles/blocks) 1895 538-Nirvana 1895 377-Spinach b 1/4 Yard h 1/4 Yard (background - 11 blocks) (4 bottles/blocks & 1 bottleneck) 1895 239-Persia 1895 225-Rosemary c 1/8 Yard i 3/8 Yard (background - 5 blocks) (6 bottles/blocks & 5 bottlenecks) 1895 501-Sand Dollar 1895 30-Lilac d 1/4 Yard j 1/4 Yard (wine label - 15 blocks) (3 bottles/blocks) 1895 485-Funnel Cake 1895 46-Plum e 1/8 Yard k 1/4 Yard (wine label - 6 blocks) (3 bottles/blocks & 14 bottlenecks) 1895 80-Taupe 1895 390-Zinfandel f 5/8 Yard* l 1/8 Yard (sashing, borders & binding) (2 bottles/blocks & 1 bottleneck) 2 09/2020 This Wine Club wall-hanging was inspired by a collection of a dozen Hoffman Hand-dyed Watercolors and naturally lends itself to a wine theme. This project is paper-pieced and offers a Hoffman Wine label that can be printed onto our Watercolors. The method shown is decorative only and NOT permanent or waterproof. Experience of Paper-Piecing is recommended. Read the instructions carefully before cutting. View our instructional video here www.youtube.com/watch?v=BfnEVoCy7uw The finished wall-hanging measures 23” x 38”. It is made up of three rows of seven blocks for a total of 21 blocks and has a 1” finished border.
    [Show full text]