VoIP Micro-Analog SmartNode™ M-ATA

Quickly and easily converts any phone to VoIP for residential and telecommuter applications.

Ultra-miniature he SmartNode Micro Analog Telephone ging and prioritization enables voice traffic to Smallest full-function analog telephone adapter Adapter provides connectivity for analog be handled before data traffic, ensuring high- available today! T phones to a home, home office or corpo- er quality voice calls. Support for PPPoE tun- neling simplifies extending corporate intranet Supports over 20 voice calling features rate LAN. Connecting to any analog phone or services to telecommuters. Call waiting, call conference, caller ID, hotline, PBX, the SmartNode product is a cost effective distinctive ring and more! solution for small offices and telecommuters The user friendly web interface offers two levels to access -based telephone services of configuration: level one covers basic sub- DHCP, PPPoE and corporate intranet systems across estab- Provides maximum connectivity across firewalls scriber-specific parameters, level two offers lished LAN and Internet connections like DSL and transport networks. advanced settings for the transport network. and cable modems. Configuration and firmware can be downloaded SIP Signaling from a centralized TFTP or HTTP server. Deploy into any multimedia, interactive, or The M-ATA provides one (RJ-45) softswitch network with the leading call and ses- port and one FXS (RJ-11) analog phone port The M-ATA is SIP standard compliant. Analog sion signaling protocols. for quick and easy interconnection to the local phones attached to the SmartNode can use Toll Quality CODECs LAN. LEDs show at-a-glance the status of the advanced calling features such as call for- Uses G.723 or G.729 for low- applica- system, LAN, WAN, and phone ports. warding, caller ID, 3-way calling, call holding, tions or standard G.711 or G.726 CODECs for call retrieval, and call transfer. toll-quality voice.Uses G.723 or G.729 for low- A full suite of IP features (DHCP) are available bandwidth applications or standard G.711 or to maximize universal connectivity. VLAN tag- Visit www.patton.com for more information. G.726 CODECs for toll-quality voice.

Centralized management HTTP/SNMP manageable from any location.

Proven Patton design, Patton supported FXS port 10/100Base-T Ethernet LAN port

Yes, they really are this small! These feature-packed tele- phone adapters are small 100–240 VAC enough to fit in your pocket! external power supply Typical Application Patton’s Micro-Analog Telephone Adapter provides seamless access to Internet telephony and data services. The M-ATA connects to any broad- band access provider via a cable or xDSL modem.

Connect via network, M-ATA xDSL Modem, or

FXS Phone Corporate Corporate IP-PBX Intranet

Voice Internet xDSL Modem Service Provider M-ATA

FXS Cable Modem Phone Internet

Specifications* Voice Connectivity tone detection and generation • Silence ing • Message waiting indication • Self- Operating humidity 2-wire Loopstart, RJ-11/12 • Short haul suppression and comfort noise • caller ID block • Speed dial • Voicemail 5–80% (non-condensing) loop 1.1 km @3REN • Caller-ID Type-1/2 Configurable dejitter buffer • DTMF in- message retrieval • Warmline calling band & out-of-band • Configurable trans- Power FSK and ITU V.23/Bell 202 generation IP Services mit packet length • RTP/RTCP (RFC 100–240 VAC (50/60 Hz) Connectivity 1889) • STUN DHCP client • PPPoE • Programmable static routes • ICMP redirect (RFC 792); Compliance 1 10/100Base-TX Full Voice Services/Features Packet fragmentation • VLAN sup- EMC compliance: EN55022 and EN55024 Duplex/Autosensing Ethernet RJ-45 Anonymous CallerID block • Call block- port 802.1p/q • Safety compliance: EN 50950 • CE Voice Processing ing • Call forward - on busy • Call for- Management compliance • FCC Part 15 Class B (signalling dependent) ward - selective • Call forward - uncondi- tional • Call hold/retrieve • Call return • Browser configuration interface • Dimensions SIP • Voice CODECS (G.711 A-Law/µ- Call transfer - blind • Call transfer - with Multilevel security access • TFTP & HTTP Law (64 kbps); G.726 (ADPCM 40, 32, consultation • Call waiting/retrieval • configuration & firmware loading • 3.6L x 2.1W x 0.78H in. 24, 16 kbps); G.723.1 (5.3 or 6.3 kbps); Caller-ID • Conference drop • SNMP v2 agent • Syslog support (9.0L x 5.3W x 1.9H cm) and G.729ab (8 kbps) • G.168 echo can- Conferencing (3-way calling) • Distinctive cellation • 2 parallel voice connections • ring • Do not disturb • Hotline calling • Operating Temperature Weight DTMF detection and generation • Carrier Incoming CallerID on/off • IP URL dial- 0–40°C (32–104°F) 0.2 lbs (0.09 kg)

Ordering Information M-ATA-1/E: Micro Analog Telephone Adapter; 1 x FXS RJ11; 1 x 10/100Base-TX

* Specifications subject to change without notice.

Patton Electronics Co. Patton-Inalp Networks AG Patton Hungary Zrt 7622 Rickenbacker Drive Meriedweg 7 Gábor Dénes utca 4. Gaithersburg, Maryland 20879 CH-3172 Niederwangen Infopark Building C USA Switzerland Budapest H-1117 Phone +1 301 975 1000 Phone +41 (31) 985 25 25 Hungary +1 301 869 9293 Fax +41 (31) 985 25 26 Phone +36 1 439 4840 E-mail [email protected] E-mail [email protected] Fax +36 1 439 4844 07MMATA-DS8 Web www.patton.com Web www.inalp.com E-mail [email protected] Web www.patton.com Patton is a registered trademark, and SmartNode and Let’s Connect! are trademarks of Patton Electronics Company in the United States and other countries.