DOCSLIB.ORG

Hardware 299

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hardware 299 Hardware From Little Falls, Minnesota, Jim Colombe’s 1950 Commander From Middletown, New York, Michael & Patricia Pregun’s 1949 Pickup THIS SEC T ION CON T AINS MANY PIECES OF HARDWARE T HA T WERE USED ON ST UDEBAKER VEHICLES . TO USE T HIS SEC T ION YOU MUST USE T HE ST UDEBAKER CHASSIS OR BODY MANUALS T O DE T ERMINE IF A PAR T IS CORREC T FOR YOUR PAR T ICULAR APPLICA T ION . FOR EXAMPLE , IF YOU ARE LOOKING FOR T HE BOL T S T HA T SECURE T HE S T AR T ER ON T HE CLU T CH HOUSING , YOU WILL FIRS T NEED T O FIND “S T AR T ERS ” IN T HE ELEC T RICAL SEC T ION OF T HE CHASSIS CA T ALOG . UNDER T HE LIS T ING OF S T AR T ERS YOU WILL FIND T HE “BOL T S ” LIS T ED . YOU WILL NEED T O IDEN T IFY WHICH BOL T IS CORREC T FOR YOUR VEHICLE AND NO T E I T S PAR T NUMBER . YOU CAN T HEN LOOK T HROUGH T HIS SEC T ION T O DE T ERMINE IF T HE NUMBER IS LIS T ED AND AVAILABLE . WHEN ORDERING I T E ms FRO M T HI S S EC T ION PAR T N um BER S must BE PROVIDED . 299 G100015 bolt .......................... .50¢ ea. G106958 woodruff key ................15¢ ea. G114787 pin .......................... $1.00 ea. G100032 bolt .......................... .75¢ ea. G107322 pal nut ...................... .20¢ ea. G114981 valve ....................... $2.50 ea. G100038 bolt .......................... .75¢ ea. G107817 nut ........................... .50¢ ea. G115075 pipe ........................ $2.00 ea. G100109 screw ....................... .50¢ ea. G107825 nut ........................... .50¢ ea. G115543 washer ...................... .05¢ ea. G100121 bolt .......................... .50¢ ea. G107828 pal nut ...................... .25¢ ea. G115704 bolt ......................... $1.00 ea. G100123 bolt .......................... .50¢ ea. G108588 bolt ........................ $1.00 ea. G115706 bolt ......................... $1.00 ea. G100127 bolt ........................ $1.00 ea. G108598 bolt ........................ $1.00 ea. G115729 bolt ........................... .25¢ ea. G100129 bolt ........................ $1.00 ea. G108618 bolt ........................ $1.00 ea. G115772 nut .............................15¢ ea. G100134 bolt .......................... .50¢ ea. G109345 zerk ....................... $2.50 ea. G116102 washer ...............................call G100141 bolt ......................... $1.25 ea. G109350 zerk ....................... $1.95 ea. G116332 fitting ...................... $2.00 ea. G100756 screw ....................... .25¢ ea. G109354 zerk ....................... $2.00 ea. G116383 clevis ...................... $2.00 ea. G102649 nut ......................... $1.00 ea. G109457 zerk ....................... $2.00 ea. G117049 nut .............................10¢ ea. G102695 set screw .................. .25¢ ea. G109732 screw .........................15¢ ea. G117051 nut ........................... .20¢ ea. G102895 set screw ..................$1.10 ea. G109742 carriage bolt ............. $1.50 ea. G117198 bolt ......................... $2.00 ea. G103026 nut ......................... $1.00 ea. G110309 zerk ........................ $2.75 ea. G117292 screw ..................... $2.00 ea. Hardware G103027 nut ........................... .25¢ ea. G110322 clevis ...................... $2.50 ea. G117714 stud ....................... $2.00 ea. G103029 nut ......................... $1.00 ea. G110330 wing nut .................... .50¢ ea. G117918 plug ...........................10¢ ea. G103088 nut ........................... .25¢ ea. G110411 pin ............................ .50¢ ea. G117919 plug ...........................10¢ ea. G103179 stud ........................ $3.00 ea. G110418 pin ............................ .75¢ ea. G117923 plug .......................... .25¢ ea. G103321 washer ........................15¢ ea. G110435 rivet ........................ $1.00 ea. G118682 carriage bolt ............ $2.00 ea. G103324 washer ...................... .25¢ ea. G110437 rivet ........................ $1.00 ea. G118774 washer ..................... .25¢ ea. G103325 washer ...................... .35¢ ea. G110488 screw ....................... .75¢ ea. G118969 bolt ......................... .50¢ ea. G103344 washer ..................... .35¢ ea. G110533 screw ........................ .25¢ ea. G119252 nut ........................... .20¢ ea. G103346 washer ..................... .50¢ ea. G110741 pin ..............................15¢ ea. G119254 nut ........................... .25¢ ea. G103348 washer ..................... .55¢ ea. G111137 carriage bolt ............. $1.00 ea. G119255 nut ......................... $1.00 ea. G103493 pin ........................... .85¢ ea. G111196 screw ..........................15¢ ea. G119928 fitting ...................... $2.00 ea. G103495 pin ......................... $2.50 ea. G111340 screw ..........................15¢ ea. G119931 fitting ...................... $2.00 ea. G103565 pin ........................ .$1.50 ea. G111604 hose clamp ................. No Stock G119932 fitting ...................... $2.00 ea. G103583 pin ........................... .50¢ ea. G111605 hose clamp ................. No Stock G119933 bolt ......................... $1.00 ea. G103736 pin ........................... .25¢ ea. G111606 hose clamp ..............$4.00 ea. G120128 pipe ........................ $2.50 ea. G103869 plug ....................... $2.65 ea. G111622 hose clamp .............. $2.75 ea. G120151 fuse ........................ $1.50 ea. G103875 plug ........................ $2.50 ea. G111633 screw ..........................15¢ ea. G120214 washer ........................10¢ ea. G103876 plug ........................ $3.50 ea. G111684 screw ..........................15¢ ea. G120221 screw .........................10¢ ea. G103879 plug ........................ $1.50 ea. G112012 pin ............................ .20¢ ea. G120222 screw .........................10¢ ea. G103883 plug ....................... $1.40 ea. G112432 nut ........................... .20¢ ea. G120243 fitting ...................... $2.00 ea. G103892 plug ......................... .50¢ ea. G112657 bolt ........................... .50¢ ea. G120248 bolt ........................ $1.00 ea. G103895 plug ......................... .50¢ ea. G112752 bolt ......................... $1.20 ea. G120368 nut .............................10¢ ea. G103907 woodruff key ............ $1.00 ea. G112959 set screw .....................15¢ ea. G120371 nut ........................... .25¢ ea. G104150 rivet ............................15¢ ea. G113181 plug ........................$4.00 ea. G120380 washer ..................... .05¢ ea. G104152 rivet .......................... .20¢ ea. G113885 screw ...................... $1.00 ea. G120382 washer ........................10¢ ea. G105036 screw ..................... $5.25 ea. G113897 compression gasket .. .$1.50 ea. G120383 washer ........................10¢ ea. G105451 compression gasket ... $1.00 ea. G114149 screw ........................ .75¢ ea. G120386 washer ...................... .05¢ ea. G105453 compression gasket .. $1.00 ea. G114498 nut ......................... $1.00 ea. G120392 washer ...................... .05¢ ea. G105602 plug ......................... .20¢ ea. G114546 nut .............................10¢ ea. G120393 washer ........................10¢ ea. G105603 plug ......................... .75¢ ea. G114547 washer ...................... .25¢ ea. G120518 carriage bolt ............ $1.00 ea. G106288 bolt .........................$1.75 ea. G114604 washer ...................... .25¢ ea. G120614 nut ............................15¢ ea. G106290 bolt ........................ $1.25 ea. G114614 washer ...................... .05¢ ea. G120628 bolt ........................ $2.00 ea. G106324 bolt ........................ $1.00 ea. G114620 washer ...................... .20¢ ea. G120741 bolt ......................... $1.00 ea. G106326 bolt ........................ $1.00 ea. G114627 fitting ...................... $1.00 ea. G120758 bolt ....................... $1.00 ea. G106517 plug .......................... .50¢ ea. G114671 screw ...................... $1.00 ea. G120787 shut off valve ............ $5.00 ea. G106749 woodruff key .............. .50¢ ea. G114756 nut ......................... $1.00 ea. G120854 screw ....................... .50¢ ea. G106750 woodruff key ............ $1.00 ea. G114785 pin .......................... $1.00 ea. G120898 washer ..................... .20¢ ea. 300 WHEN ORDERING I T E ms FRO M T HI S S EC T ION PAR T N um BER S must BE PROVIDED . Hardware G120910 screw ....................... .20¢ ea. G127782 set screw ....................10¢ ea. G140871 set screw .................. .20¢ ea. G120916 bolt ........................ $2.00 ea. G127833 screw ........................10¢ ea. G140872 set screw .................. .20¢ ea. G121615 bolt ......................... $2.00 ea. G127880 bolt ....................... $2.00 ea. G140880 set screw ...................15¢ ea. G121742 screw ........................ .25¢ ea. G127950 plug ...................... $1.00 ea. G141114 pin .............................15¢ ea. G121743 nut ..............................15¢ ea. G127952 plug ....................... $1.00 ea. G141118 pin ........................... .20¢ ea. G121744 washer ...................... .03¢ ea. G127985 rivet ...........................10¢ ea. G141240 pin .......................... .25¢ ea. G121832 screw ..........................15¢ ea. G128270 screw ........................10¢ ea. G141246 pin .......................... .50¢ ea. G121839 screw ..........................10¢ ea. G131015 washer .......................10¢ ea. G141899
Load more

Recommended publications
  • Mechanical Properties of Steel Fasteners – Bolts, Screws and Studs
    TECHNICAL INFORMATION Contents Page Contents................................................................................................................................................15-0-1 & 2 Foreword..............................................................................................................................................15-1-1 Mechanical properties of steel fasteners – bolts, screws and studs ....................................................................................................................... 15- 5- 1 – bolts and screws M 1 to M 10 (breaking torques) .............................................................................. 15- 5- 2 – nuts - general explanation .......................................................................................................................... 15- 5- 3 - “DIN” nuts ......................................................................................................................................... 15- 5- 4 - “ISO” nuts with metric (ISO) screw thread with coarse pitch ............................................................ 15- 5- 5 - “ISO” nuts with metric (ISO) screw thread with fine pitch ................................................................. 15- 5- 6 & 7 - nuts classified according to hardness ............................................................................................... 15- 5- 8 Material properties of steel fasteners – steels ..................................................................................................................................................
    [Show full text]
  • Body Shop Fasteners
    BSF-712 QUALITY BODY PRODUCTS SHOP FASTENERS QUALITY PRODUCTS PRODUIT DE QUALITE INTERIOR EXTERIOR INTERIEUR EXTERIEUR ATTACHES A CARROSSERIE H. Paulin & Co., a division of The Hillman Group Canada ULC Toronto, Canada M1L 4N3 www.hpaulin.com www.hpaulin.com INDEX Name Page Name Page BOLTS GM........................................................................ 30-32 Misc. Bolts ................................................................. 20 Interior Retainers. Imported Brands Body Bolts (Inch & Metric).................................... 17-20 BMW..................................................................... 34 Bumper Bar Bolts (Inch & Metric)....................... 15-17 Honda.................................................................. 34-35 Hyundai.............................................................. 36 KIA........................................................................ 36 Lexus.................................................................... 36 BUSHINGS Mazda.................................................................. 36-37 Door Hinge Bushings............................................. 75 Mersedes-Benz................................................. 37 Mitsubishi.......................................................... 37 CLIPS Nissan.................................................................. 38 ‘T’ Bolt Clis (Inch)...................................................... 21 Toyota.................................................................. 39 Moulding Clips & Retainers.................................
    [Show full text]
  • Mettex Fasteners Technical Information
    TECHNICAL INFORMATION Contents ......................................................................................................................................................... Page Contents ................................................................................................................................................ 15- 0- 3 & 4 Foreword .............................................................................................................................................. 15- 1- 1 Mechanical properties of steel fasteners – bolts, screws and studs ....................................................................................................................... 15- 5- 1 – bolts and screws M 1 to M 10 (breaking torques) .............................................................................. 15- 5- 2 – nuts - general explanation .......................................................................................................................... 15- 5- 3 - “DIN” nuts ......................................................................................................................................... 15- 5- 4 - “ISO” nuts with metric (ISO) screw thread with coarse pitch ............................................................ 15- 5- 5 - “ISO” nuts with metric (ISO) screw thread with fine pitch ................................................................. 15- 5- 6 & 7 - nuts classified according to hardness ..............................................................................................
    [Show full text]
  • Fasteners & Bolts
    Parts for Trucks, Trailers & Buses ® 11 FASTENERS Proven, reliable and always innovative. TRP® offers reliable aftermarket products that are designed and tested to exceed customers’ expectations regardless of the vehicle make, model or age. BOLTS • Clips • GROMMETS • inserts • nuts • sCrews • washers Tested. Reliable. Guaranteed. TABLE OF CONTENTS Fasteners FASTENERS Fastener Guide ..............................11-4 Choosing the right Bolts ......................................11-6 replacement part or service for your vehicle—whether you own Clips .....................................11-39 one, or a fleet—is one of the Collars ....................................11-44 most important decisions you can make for your business. Cotter ....................................11-45 ® And, with tested TRP parts Fastener Assortment for HWU10000 ............11-48 it’s an easy decision. Fastener Assortment for HWU11301 ............11-50 Regardless of the make Grommets .................................11-53 you drive, TRP® quality replacement parts are Huck Bolts .................................11-54 engineered to fit your truck, Huck Collars ...............................11-56 trailer or bus. Choose the parts that give you the best Huck Fastener Tools .........................11-57 value for your business. Check Inserts ....................................11-59 them out at an approved TRP® retailer near you. Kits ......................................11-66 Nuts .....................................11-67 Pins ......................................11-86 The cross reference information in this catalog is based upon data provided by several industry sources and our partners. While every attempt is made to ensure the information presented is accurate, we bear no liability due to incorrect or incomplete information. Product Availability Due to export restrictions and market ® demands, not all products are TRP North America always available in every location. 750 Houser Way N. Check for availability in your area with your local TRP® Distributor.
    [Show full text]
  • HARDWARE AIRCRAFT WASHERS Are Easily Recognized
    HARDWARE AIRCRAFT WASHERS are easily recognized. They are those thin looking and capable of withstanding high tension loads. The standard washer is 1/16 inch thick and is avail - nuts, and they are used most often with clevis bolts. Be careful when using a castle nut on a clevis bolt able in two types for each of the most commonly Never use shear nuts where the installation is sub - in the control system where rudder pedals or other used bolt diameters. The smaller diameter washer jected to tension loading. linkage might interfere with other parts. Cotter pins is known as the AN960, and the larger diameter SELF-LOCKING NUTS & have a way of snagging. washer, the AN970. The larger washer is often NUT SAFETY FEATURES TORQUING called a wood washer because it is used most fre - All nuts/bolt installations in your aircraft should have Except as a last resort, do not torque a bolt by turn - quently against wood surfaces to provide a larger some safety features to prevent their loosening in ing it. bearing surface. service. Methods employed include the self-locking Tighten or torque castellated nuts as you would any Plain washers are used in bolt installations to pres - nuts, cotter-key combinations, jam nuts, lock wash - other standard nut. If the slots and cotter pin hole in ent a smooth level bearing surface for either the bolt ers, palnuts, and still found in primitive areas, peen - the bolt will not line up for safetying, tighten the nut head or nut - sometimes both. Use a washer under ing of the bolt end with a hammer.
    [Show full text]
  • Bins & Assortments
    Bins & Assortments www.neiafasteners.com www.nfc-usa.com E-Mail: [email protected] E-Mail: [email protected] 1-800-782-6342 1-800-786-4658 8530 “K” Street 1817 Jasper Street Omaha, NE 68127 Kansas City, MO 64116 Phone: (402) 592-4988 Phone: (816) 221-8885 Fax: (402) 592-9271 Fax: (816) 472-5555 905 East Kansas Ave. 2335 B-104 E. Chestnut Expwy. Arkansas City, KS 67005 Springfield, MO 65802 Phone: (620) 442-7526 Phone: (417) 865-6246 Fax: (620) 442-7583 Fax: (417) 865-0596 Table of Contents Categorized Listing BINS & ASSORTMENTS 1 AUTOMOTIVE ASSORTMENTS 84 HOSE & FITTING ASSORTMENTS 72-83 Body Clip 84 Black Pipe Fitting 81-83 Speed Nut 84 Brass Air Brake Fitting 77 BINS, TRAYS & ACCESSORIES 1-9 Brass Compression Fitting 76 9" Metal Bins & Accessories 6 Brass DOT Push-In Fitting 78 12" Metal Bins & Accessories 7 Brass Pipe Fitting 74 Metal Drawers & Accessories- Large 1-2 Brass Push-In Fitting 76 Metal Drawers & Accessories- Small 3 Brass SAE 45 Deg Flare Fitting 75 Plastic Drawers & Accessories- Large 4 Composite DOT Push-In Fitting 78 Plastic Drawers & Accessories- Small 5 Grease Fitting 80 Shelf Boxes & Gauges 9 Hose Clamp 72 Specialty Metal Storage 8 Steel JIC 37 Deg Fitting 79 ELECTRICAL ASSORTMENTS 52-68 Vacuum Tee & Connector 73 Battery 52 METRIC ASSORTMENTS 46-51 Battery Terminal 68 Class 8.8 Hardware- Coarse Thread 46-48 Cable Tie 64 Class 10.9 Hardware- Coarse Thread 49-50 Crimp N Seal Terminal 59-60 Phillips Pan Head Machine Screw 51 Crimp Solder & Seal Terminal 57 RET & ANCHOR ASSORTMENTS 29-35 Deutsch Terminal 62 Bridge
    [Show full text]
  • CHAPTER 4 © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT for SALE OR DISTRIBUTION NOT for SALE OR DISTRIBUTION
    © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION CHAPTER 4 © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC. NOT FOR SALE OR DISTRIBUTION. 056754_CH04_p106-125.indd 106 3/12/14 9:24 PM © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION Identifying Locking © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning,4 LLC DevicesNOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION Primary Learning Objectives © Jones & Bartlett Learning, LLC © Jones & Bartlett Learning, LLC NOT FOR SALEAfter reading OR DISTRIBUTIONthis chapter, you will be able to: NOT FOR SALE OR DISTRIBUTION 1.
    [Show full text]
  • Cm Wp Me Ha Ap Lg Ep Cs in El Av to Ps Bv Bv
    2006_81-88.qxd 7/3/06 10:53 AM Page 81 HARDWARE KITS HARDWARE KITS BEGINNER'S BOLT KITS ADVANCED MECHANIC'S KIT CM UNDRILLED KIT 1,229 Pieces - Cadmium Plated 102 Pieces DRILLED UNDRILLED AN3 AN4 AN5 AN6 AN3 QTY AN4 QTY AN5 QTY -4 ......................-4A ....................3 ....................3 ..................3 ....................3 WP -3A....................4 -5A ....................6 -4A ....................6 -5 ......................-5A ....................3 ....................3 ..................3 ....................3 -4A....................6 -6A ....................6 -6A ....................6 -6 ......................-6A ....................3 ....................3 ..................3 ....................3 -7 ......................-7A ....................3 ....................3 ..................3 ....................3 -5A....................6 -7A ....................6 -10A ....................6 -10....................-10A ....................3 ....................3 ..................3 ....................3 ME -6A....................6 -10A ....................6-11A....................6 -11 ....................-11A ....................3 ....................3 ..................3 ....................3 -7A....................6-11A....................6 -13A ....................4 -12....................-12A ....................3 ....................3 ..................3 ....................3 -10A ..................6 -15A ....................4 -14A ....................6 -13....................-13A ....................3 ....................3
    [Show full text]
  • Standard Aviation Maintenance Handbook by Jeppeson
    OJeppesan . 55 lnvemeu Or. e. EngtewoO(I, oo 80112-5498 Webs.lt!J: -.Jeppesen.com EmaR: [email protected] 01975, 1985. 2003 All rights reserved. Printed In Iha United St.ates of America JS.312624-002 Aircraft Drawings......... .•. ... 5- Aircraft Assemblies and Installation . • . ... 6- Aircraft Hardware. • . ... 7- Index................... .•. ... I-I INDEX i~:U:i~~ -~~ii~~~: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :=~! Trigonometry . 1-5: Tubing fitting torque values .................. : . .. .. .. .. .. 6-Zt Tubing fittings , . • 7-4, Tubing fittings, bleeder............................................ 7-4: Tubing fittings, bushing .................................. 7-50, 7-51, 7-52 Tubing fittings, cap ........................................... 7-45, 7-5f Tubing fittings, coupling ...................................... 7-44, 7-51 Tubing fittings, cross fitting .................................... 7-46, 7-5S Tubing fittings, elbow ............. 7-45, 7-47, 7-48, 7-49, 7-50, 7-53, 7-54, 7-59 Tubing fittings, nipple ................................... 7-44, 7-49, 7-52 Tubingfittings,nut ........................................... 7-56, 7-58 Tubing fittings, plugs .................................... 7-42, 7-57, 7-61 Tubing fittings, reducer ........................................... 7-55 Tubing fittings, sleeve. • . • . • 7-58 Tubing fittings, tee .•.••••.•••••..••••.••.. 7-42, 7-46, 7-48, 7-54, 7-57, 7-60 Tubing fittings, union ......................................... 7-43, 7-47 Tubing
    [Show full text]
  • Fasteners, Gaskets, Seals, and Sealants
    Fasteners, Gaskets, Seals, and Sealants After studying this chapter, you will be able to: The information presented in this chapter is important Identify commonly used automotive fasteners. and will prepare you for many repair operations and other text chapters. Select and use fasteners properly. Remove, select, and install gaskets, seals, and sealants correctly. Fasteners Summarize safety rules relating to fasteners, gas- Fasteners are devices that hold the parts of a car kets, seals, and sealants. together. Thousands of fasteners are used in vehicles. Correctly answer ASE certification test questions Figure 9-1 shows some of the most common types. that require a knowledge of fasteners, gaskets, seals, and sealants. Bolts and Nuts A bolt is a metal rod with external threads on one end Many different fasteners, gaskets, seals, and sealants and a head on the other. When a high-quality bolt is are used by the automotive technician. It is almost impos- threaded into a part other than a nut, it can also be called sible to connect any two parts of a vehicle without them. a cap screw. A nut has internal threads and usually a Cap screws Quick-lock Spring lock pins Hex head Carriage pins bolts bolts Wing nuts Snap rings Locking nuts Washers Castle nuts Socket head Studs screws Machine Plow bolts screws Tapping screws Rivets Clevis pins Set screws Lock washers Cotter pins Woodruff Toothed lock Keys keys Adhesives washers Figure 9-1. A fastener is any device or adhesive used to hold parts together. Study these basic automotive fasteners. (Deere & Co.) six-sided outer shape.
    [Show full text]
  • Body Hardware Definitions and Usage
    BODY HARDWARE DEFINITIONS AND USAGE Barrel Nuts: They are used with either stud-type or threaded fasteners where the other side of the panel is inaccessible. Typical applications include automotive nameplates on fenders, trunks, et. The nut snaps into a pre-drilled hole and the metal tabs lock it into place. These parts are also called tubular nuts. Example: 5196 Body Bolts: Usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They are used for attachment of fenders, radiators, hoods, trunks and general purpose fastening. Examples: 12336, 13614 Bumper Bolts: Used to attach bumpers. They have either a USS coarse or metric regular pitch thread. Bumper bolts are usually zinc plated with a stainless steel capped head. Example: 5242 Cable Straps (Releasable): Made of either natural or black nylon. Used to bundle wires or harnesses. 14298 features a releasable tab that allows you to loosen or tighten the strap as needed. Example: 14298 Door Hinge Pins & Bushings: Components of the vehicle’s door hinge assembly. Pins are made of steel or stainless steel. The bushings are made of bronze. The critical dimensions of the pins are the length, the diameter and the shoulder diameter (if applicable). The critical dimensions of the bushings are the inside diameter and the outside diameter. Some bushings have a splined outside diameter. Example: 19424 (pin), 14550 (bushing), 14553 (bushing) Door Lock Rod Clips: Used to attach the door lock rod to the door lock cylinder. The clips are made of either steel or nylon Example: 15518, 20470 Door & Window Crank Handle Retaining Clip: Usually made of copper plated spring steel, they are used to attach interior door and window crank handles.
    [Show full text]
  • Automotive Fastening
    Best Practices in AUTOMOTIVE FASTENING ST. LOUIS (HQ) • ATLANTA • CHICAGO • DETROIT • FRANKFURT • GUELPH • QUERÉTARO • SEOUL • SHANGHAI • UK St. Louis (HQ) With Offices All Over The World, EFC Phone: +1 314.434.2888 Gives You Local Face-To-Face Support Toll-Free: 1.800.888.3326 While Bringing You Global Advantages 1940 Craigshire St. Louis, MO 63146-4008 Atlanta Chicago Detroit Phone: +1 770.663.4070 Phone: +1 630.539.7000 Phone: +1 248.792.5281 Toll-Free: 1.800.888.3326 Toll-Free: 1.800.888.3326 Toll-Free: 1.800.888.3326 926 Curie Drive 462 Camden Drive 6785 Telegraph Rd., Suite 300 Alpharetta, GA 30005 Bloomingdale, IL 60108 Bloomfield Hills, MI 48301 Querétaro Guelph Frankfurt Phone: +52 442 347 4234 Phone: +1 226.989.5040 Toll-Free: 1.866.993.0920 Phone: +49 (0) 6196 770 0090 Toll-Free: 1.800.888.3326 Autopista México - Querétaro Mergenthaler Allee 15-21 km 194+813, Parque La Bomba 5072 Whitelaw Road 65760 Eschborn, Germany Int. B7-alpha C.P. 76246 Guelph, ON, N1H 6J3 Canada El Colorado, El Marques, QRO UK Seoul Shanghai Phone: +44 191 916 0240 Phone: +82-2-555-9031 Phone: +86-21-54396210 Drum Industrial Estate Room 5006, No.145 Pujian Road Chester-Le-Street East #802–803, Teheran-ro 322 Pudong New Area 200127 Durham DH2 1AA Gangnam-gu, Seoul, Korea 06211 Shanghai United Kingdom​​ TABLE OF CONTENTS PANEL FASTENERS Plastic Clips with Foam Seals............................................................................................................................1 Weatherstrip Clips...........................................................................................................................................
    [Show full text]