Maybrook® Universal Urinal Vitreous China

MAYBROOK® UNIVERSAL URINAL VITREOUS CHINA

MAYBROOK® UNIVERSAL WASHOUT URINAL

• Vitreous china • Ultra High Efficiency, Low Consumption. Operates in the range of 0.125 gpf to 1.0 gpf (0.5 Lpf to 3.8 Lpf) • Flushing rim • Washout flush action • Integral strainer • 3/4" inlet spud • Outlet spud with 1-1/2" tubing tailpiece • Wall hanger • Fixture only • Meets ANSI flush requirements at 0.125 to 1.0 gpf

❏ 6581.001 Top spud

Nominal Dimensions: 324 x 324 x 457mm (12-3/4" x 12-3/4" x 18")

Recommended working pressure – between 20 psi at valve when flushing and 80 psi static SEE REVERSE FOR ROUGHING-IN DIMENSIONS Compliance Certifications - Meets or Exceeds the Following Specifications: To Be Specified: • ASME A112.19.2 for Vitreous China Fixtures ❏ Color: ❏ White

❏ Flush Valve: 1.0 gpf Flush Valve: Sensor-Operated: ❏ American Standard Selectronic® #6063.101.002 DC Power (Top Spud) ❏ American Standard Selectronic® #6062.101.002 AC Power (Back Spud) 1.0 gpf Flush Valve: Manual-Operated: ❏ American Standard # 6045.101.002 0.5 gpf Flush Valve: Sensor-Operated: ❏ American Standard Selectronic® #6063.051.002 DC Power (Top Spud) ❏ American Standard Selectronic® #6062.051.002 AC Power (Back Spud) 0.5 gpf Flush Valve: Manual-Operated: ❏ American Standard #6045.051.002 0.125 gpf Flush Valve: Sensor-Operated: ❏ American Standard Selectronic® #6063.013.002 DC Power (Top Spud) ❏ American Standard Selectronic® #6062.013.002 AC Power (Back Spud) 0.125 gpf Flush Valve: Manual-Operated: ❏ American Standard #6045.013.002

When used with ❏ “P” Trap: 0.125 gpf or 0.5 gpf urinal flush valves

6581.001 TOP SPUD

FINISHED WALL

19mm (3/4") N.P.T. OR C.W.T. SUPPLY TO FLUSH VALVE

121mm 64mm (4-3/4") (2-1/2") 292mm (11-1/2") 324mm 19mm (3/4") (12-3/4") K-2 SPUD HANGER

298mm (11-3/4") 457mm (18") 324mm (12-3/4")

298mm (11-3/4")

133mm (5-1/4")

292mm 171mm (11-1/2") (6-3/4") 610mm 178mm (24") 10mm (3/8") (7") 32mm OPTIONAL D. HOLES (1-1/4") TO FINISHED *SUGGESTED FLOOR 38mm (1-1/2") O.D. WASTE 38mm (1-1/2") O.D. TAILPIECE

NOTES: DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED. “P”* TRAP AND FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 20 psi (flowing)-80 psi (static)

** Water pressure over 80 psi is not recommended for most plumbing fixtures.

FLOW REQUIREMENT: 8gpm (30.3 L/min.)

ACCESSORIES: GENERAL DESCRIPTION: • Cast wall flanges (3/4") Manual Piston-Type Urinal Flush Valve for 3/4" top spud urinals.

INCLUDES: • 3/4" I.P.S. angle stop with back-flow prevention and vandal-resistant cap • Sweat solder kit including cover tube and wall flange TYPICAL URINAL INSTALLATION: • High back pressure vacuum breaker with down tube WASHBROOK URINAL SHOWN FINISHED WALL • Spud coupling & flange for 3/4” top spud

38-127mm 108mm-133mm (4-1/4" to 5-1/4") (1-1/2"-5") PRODUCT FEATURES:

• Self-cleaning brass piston with integral wiper spring SUPPLY DN 20mm prevents clogging and reduces maintenance CRITICAL 6045.013 -C-L- LEVEL (3/4" I.P.S.) -C-L- 343mm ROUGH-IN • Piston operation delivers superior flush accuracy (13-1/2") *CRITICAL DIMENSION and repeatability LEVEL 295mm (11-1/2") 295mm SEE ROUGH-IN FOR 3/4" (11-1/2") ON BACK TOP SPUD • Piston valve remains closed and does not need FIXTURES to be reset after loss of water pressure • Non-hold open handle • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right handed • ADA complaint

FINISHED FLOOR

RECOMMENDED SPECIFICATION: Manual urinal flush valve shall feature self-cleaning brass piston valve with integral wiper spring in bypass orifice to prevent clogging. Valve remains closed and does not need to be reset after loss of water pressure. Includes cast brass valve body and cover with chrome finish and vandal resistant stop cap. Includes sweat solder kit with wall flange and cover tube. Angle stop with back-flow protection and vacuum breaker included. 0.125 gpf / 0.5Lpf Flush valve shall be American Standard Model # 6045.013.002. L167 © 2010 AS America Inc. MANUAL FloWise® URINAL FLUSH VALVE 0.125 GPF

LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant

FINISHED WALL Roughing-in Dimensions 38mm-127mm (1-1/2"-5")

SUPPLY DN 20mm 108mm-133mm (3/4" I.P.S.) (4-1/4" to 5-1/4") 6045.051 ROUGH-IN -C-L- -C-L- DIMENSION 295mm 6045.051 *CRITICAL (11-1/2") 343mm LEVEL (13-1/2")

FOR 3/4" TOP SPUD FIXTURES

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture. Consult Codes for details.

Left or Right Hand Installation

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES