Make the Best Connection S-VIDEO Use This Guide to Achieve the Optimal Connection for Each of Your Components

HUG_30PW9110D.pdf 2005-06-30 11:00:00 AM

4 Video Camera/Games Console to TV How to TV Side Jack Panel

Composite Audio/Video make the best connection S-VIDEO Use this guide to achieve the optimal connection for each of your components. A VIDEO Alternative connections are also provided. L Connect the video Connect audio cables AUDIO Connection Basics A B R cable (yellow) from (red/white) from audio the video output on outputs on device to Best Better Good Basic Basic camera (or other audio inputs (red/white) TV B device) to the video on the side of TV. input (yellow) located on the side Note: for mono devices, HDMI Component Video S-Video Composite Audio/Video RF of TV. connect only white audio High-Deﬁnition Multimedia Input Supplies a better picture Separate video (yellow) and Provides a basic cable from device’s audio Interface provides an than RF and Composite audio (red/white) cables that connection output to white audio input Provides superior picture uncompressed, all-digital quality by separating the connections. Used with provide a basic connection from for antenna or cable. on the side of TV. VIDEO AUDIO red/white audio cables. the cable box and other devices. Provides both audio LEFT RIGHT S-VIDEO audio/video connection. green, blue and red Note : The color of audio inputs Turn on TV and the Press PLAY on the HDMI provides the ultimate luminance signals. Typically and video. C D Video Camera may differ, e.g. red/white or device. Press CH+ or device to verify Video Camera Jack Panel connection. Please use a used with red/white certified HDMI cable red/black. C CH- on the remote connection. audio cables.

M control until FRONT/ SIDE appears on TV C Y screen. 1 Set-Top Box to TV

MY Other Possible Connections

CY Remote CMY S-Video Control CH+ and CH- Buttons HDMI RF Cable Refer to panel 3. K OR Connect RF cable Use second RF cable to A Connect RF cable B Connect cable box A B from wall to input at to TV using HDMI from wall to input at connect the cable box back of the cable cable. the back of the cable to the TV input (75 ?). box. box. Note: This connection gives Need more help? Cable Signal IN mono sound. For stereo C Set output switch C Set output switch from Cable Company on set-top box to sound use also composite User manual: on set-top box to CH 3 or 4 and tune audio/video connection Check the user manual that came with your TV. CH 3 or 4 and TV to same channel. (Refer to panel 3). tune TV to same A A Online help: www.p4c.philips.com or channel. Back of Cable Box www.usasupport.philips.com VIDEO Note: In some cases, AUDIO IN SPDIF IN OUT cable box will automati- R L S-VIDEO CABLE IR DVD-D OUT TO IN cally tune to channel 3 TV/VCR AUDIO OUT Y Pb Pr or 4. Just change USB TV OPTICAL SPDIF channels until picture PASSCARD appears.

Other Possible 75 ? B 2005 © Koninklijke Philips Electronics N.V. Connections B All rights reserved. Component 3139 125 34972 75 ? Input Video TV Refer to panel 2. HDMI Input 2 DVD Player or DVD Recorder to TV 3 VCR to TV

TV TV Jack Panel

AV1 in AV2 in

HDMI S-Video VIDEO Y L/Mono

Pb AUDIO

S-VIDEO R Pr

COMPONENT VIDEO INPUT TV A Connect DVD player/ B Turn on TV and DVD DVD recorder to the player/DVD recorder. A Connect S-Video B Connect audio cables B A TV using HDMI cable. Press CH+ or CH- on cable to S-Video input (red/white) to audio AV remote control to tune A on back of TV and inputs on back of TV and Back of VCR to the video supplied S-Video output on Audio outputs on back by HDMI. back of VCR. of VCR. Insert a pre- HDMI Input C Back of DVD Player/Recorder Turn on TV and VCR. Insert pre-recorded recorded DVD into L R B C D VIDEO S-VIDEO ANT/CABLE DVD player/ DVD Press CH+ or CH- on videotape into VCR and AUDIO OUT OUT OUT OUT COMP VIDEO S-VIDEO VIDEO AUDIO recorder and press Y Pb R remote control until press PLAY to verify OUT OUT OUT AV1 or AV2 appears correct connection. PLAY to verify Pr L correct connection. on TV screen. Remote C Control CH+ and CH- Buttons Note: When you connect S-Video and AV2 at the same time, you can only hear sound coming from S-Video . OR CH+ and CH- Buttons Remote Control CH+ and CH- Buttons TV Jack Panel

AV1 in AV2 in OR

VIDEO

Y Component Video Input L/Mono TV Jack Panel Pb AUDIO S-VIDEO

R Pr AV1 in AV2 in COMPONENT VIDEO INPUT VIDEO

Y TV Composite Audio/Video L/Mono Pb AUDIO S-VIDEO R Pr Insert Component Connect red/white A B COMPONENT VIDEO INPUT A Video connectors into B audio cables into the TV their corresponding audio output jacks jacks on both DVD on DVD player/DVD Connect the video Connect audio cables player/DVD recorder recorder and audio COMP VIDEO S-VIDEO VIDEO AUDIO A B B A Y Pb R cable (yellow) to the (red/white) to audio and TV (sometimes AV inputs on TV. OUT OUT OUT Back of VCR Pr L VIDEO AV input on AV inputs on back of labeled Y, Pb and Pr). back of TV and the TV and the corre- Turn on TV and DVD Insert a pre-recorded Back of DVD Player/Recorder corresponding video sponding audio C player/DVD recorder. D DVD into DVD player/ output on back outputs (L & R) on

of VCR. back of VCR. R L VIDEO S-VIDEO ANT/CABLE Press CH+ or CH- DVD recorder and AUDIO OUT OUT OUT OUT on remote control press PLAY to verify C Turn on the TV and D Insert pre-recorded until CVI appears on correct connection. C VCR. Press CH+ or videotape into VCR TV screen. Note: When using CVI, it is best CH- on remote and press PLAY to not to connect a video signal to control until AV1 or verify correct con- C the other AV input on the TV. AV2 appears on TV nection. Other Possible Connections Remote screen. Control CH+ and CH- Buttons S-Video Composite Remote Refer to panel 3. Audio/Video Control CH+ and CH- Buttons Refer to panel 3.