DOCSLIB.ORG

LS SERIES Architectural Channel Technical Information

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
LS SERIES Architectural Channel Technical Information LS SERIES Architectural Channel CAT: FEET: Litesphere series (LS) architectural channel is a low voltage version of the classic medium based (MB) architectural channel. We incorpo- rate low voltage T3/4 wedge based LED lamps which produce from TYPE: PROJECT: 2 to 180 lumens per foot of decorative illumination. Enclosing the LED lamps is a protective clear, frosted, colored, Saber or filament style polycarbonate G16.5 comparable globe. Litesphere sockets are installed into high grade aluminum extruded channel, providing a lightweight rigidity and a solid connection to your structure. Features • Surface-mounted linear strip fixture • Your choice of 12V LS, HO, or VHO lamps (included) • Heavy-gauge extruded aluminum • Available in 6”, 12”, 18” and 24” OC standard spacing • Wiring and components are concealed • Anti-corrosion coated (Custom Finished on Request) • Polished or Satin Aluminum, Powder Coated White or Black • Custom radial bends • 2 3/16” x 2 3/16” Standard Profile extrusion available • Optional chase wiring is available • Maximum length of single fixture up to 12’ • Configurable for freight optimization • Pre-wired for quick and easy installation Technical Information • Knock-out holes for screws are provided every 24” • 7/8” diameter knockouts on mounting side (custom optional end cap knockouts) VHO Mounting *Lamp Spacing 6” OC 12” OC 18” OC 24” OC Knock-out holes for screws are provided every 24” along mounting Lumens/ft 180 91 60 45 face of channel. Globes are made of shatterproof polycarbonate and fitted with (1) foam washer for a weatherproof seal. Watts/ft 1.92 0.96 0.64 0.48 Max Run Lengths 30’ 45’ 55’ 60’ Applications Lumen/watt 94 Ideal for indoor and outdoor applications. May not be suitable for high salt air environments (consult factory). HO3/16" Warranty *Lamp Spacing1 6” OC 12” OC 18” OC 24” OC 31 years 1 /2" /2" /2” Lumens/ft 29 15 10 7 Watts/ft 1" 0.46 0.23 0.15 0.12 Max Run Lengths 60’ 90’ 110’ 130’ 3 3 3 Lumen/watt 1 2 /16" 46 2 /16" 2 /16" 1 /2" IP65 R Profile Dimensions STANDARD Lamp3 Spacing* 6” OC 12” OC 18” OC 24” OC 3 /16" 3 16 2 /16" 23/16" 1 1 2 / " 1 /2" Lumens/ft 11 6 /2" 4 3 /2” Watts/ft 0.17 0.09 0.06 0.04 1" Max Run Lengths 100’ 150’ 180’ 200’ 1/2” Lumen/watt3 3 40 3 1 2 /16" 2 /16" 2 /16" 1 /2" *Custom lamp spacing available (consult factory) 1 Based on 3000K with clear globe 1 /4” Lamps Outside Bend CRI >80/TYP83 3 3 3 3 16 2 /16" 1900K, 2700K, 3000K, 3500K, 40002K, /500016"K 2 /16" 2 / " Kelvin Temp (+/- 80K) 3SDCM, Amber Bend Left-Side (26" Min.) 4"StandardO.C. SP ProfileACING * Channel Medium Profile Channel Rated life 75,000 hr. Specify Order increments 1’ (12’Radius max) 6"1/2O”.C. SPACING Operating Voltage Right-Side Bend 12V DC Power supply Class 2 12"1 O.C. SPACING11 16 Dimmable Yes 1 /4” 2 / " Lamps Outside Bend Lamps Inside Bend Finishes** Satin or Polished Aluminum, Black or White Powder Coated 18" O.C. SPACING 3 **Custom paint or anodizing available (consult factory) 2 /16" Tivoli, LLC. reserves the (26"right Min.) to modify this specification Bend Left-Side without prior notice. 4" O.C. SPACING* 24" O.C. SPACING Copyright © Tivoli 02/02/20Specify Page 1 of 3 www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458 Radius * 4” spacing for candelabra base only 6" O.C. SPACING Right-Side Bend 12" O.C. SPACING Lamps Inside Bend 18" O.C. SPACING 24" O.C. SPACING * 4” spacing for candelabra base only LS SERIES Architectural Channel Recommended Power Supplies PRIMARY TOTAL WATTAGE / ELECTRONIC OR CAT NO APPLICATION LISTING DIMENSIONS AND SECONDARY AMPS PER BREAKER AC MAGNETIC ADNM-60-1-5-12-D 120-277V AC / 12V DC 60W / 1X5A cULus 12"W X 12"L X 4"D Electronic ADNM-150-2-5-12-D 120-277V AC / 12V DC 120W / 2X5A cULus 12”W X 12”L X 4”D Electronic ADNM-240-3-5-12-D Outdoor 120-277V AC / 12V DC 180W / 3X5A cULus 12”W X 12”L X 4”D Electronic ADNM-320-4-5-12-D 120-277V AC / 12V DC 240W / 4X5A cULus 12”W X 12”L X 4”D Electronic ADNM-240-1-15-12-D 120-277V AC / 12V DC 180W / 1X15A cULus 12”W X 12”L X 4”D Electronic JT-60-1-5-12-D 120V AC / 12V DC 60W / 1X5A cETLus 4.25”W X 8.50”L X 3.25”D Magnetic JTH-60-1-5-12-D 277V AC / 12V DC 60W / 1X5A cETLus 4.25”W X 8.50”L X 3.25”D Magnetic Indoor/Outdoor JT-240-4-5-12-D 120V AC / 12V DC 240W / 4X5A cETLus 8.50”W X 16.00”L X 4.50”D Magnetic JTH-240-4-5-12-D 277V AC / 12V DC 240W / 4X5A cETLus 8.50”W X 16.00”L X 4.50”D Magnetic CONTINUOUS MAX DESCRIPTION CAT NO INPUT VOLTAGE MAX DISCHARGE CURRENT DIMENSION VOLTAGE AC HTH Universal Surge HTH-SURGE 120V - 277V AC 320V AC 10kA (8/20 µS standard wave) 2.91” L X 1.52” W X 1.16” H Protector Dimming Interface SECONDARY CIRCUIT DESCRIPTION CAT NO APPLICATION PRIMARY VOLTAGE MAX LOAD DIMENSION VOLTAGE CAPACITY 96W @ 24V DC 0-10V Dimming Module AMP-OT-5-D Indoor 10V DC~48V DC 10V DC~48V DC 60W @ 12V DC 5A 5.9”L X 1.61”W X 0.78”H Ordering Information SOCKET LAMP GLOBE REQUIRED PRODUCT CODE SOCKET TYPE COLOR SPACING FINISH LED COLOR POWER COLOR SUPPLY - - - - - - - PSU AC = Standard LS = Standard B = Black 06 = 6” OC PA = Polished Aluminum* 19 = 1900K C = Clear See Above Channel LH = High Output W = White 12 = 12” OC SA = Satin Aluminum 27 = 2700K F = Frosted AM = Medium LV = Very High Output 18 = 18” OC BK = Black Powder Coat 30 = 3000K Y = Yellow Channel 24 = 24” OC WH = White Powder Coat 35 = 3500K** R = Red 40 = 4000K O = Orange 50 = 5000K*** G = Green AM = Amber*** B = Blue P = Purple Z = Varied Colors S = Saber A = Flare *Consult Factory for extended lead time. **3500K Recommended for colored spheres. *** VHO Only Tivoli, LLC. reserves the right to modify this specification without prior notice. Copyright © Tivoli 02/02/20 Page 2 of 3 www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458 LS SERIES Architectural Channel Mounting Accessories INTERNAL 90° BRACKET INTERNAL 45° BRACKET INTERNAL T-BRACKET END CAPS END CAPS AC-90 AC-45 AC-T STANDARD PROFILE MEDIUM PROFILE Flat 90 (Standard) 45° Bracket (Standard) T Bracket (Standard) AC-EC-SA AM-EC-SA AM-90 AM-45 Satin Aluminum Satin Aluminum Flat 90 (Medium Profile) 45° Bracket (Medium AC-EC-PA AM-EC-PA Profile) Polished Aluminum Polished Aluminum AC-EC-PW AM-EC-PW Powder Coated White Powder Coated White AC-EC-PB AM-EC-PB Powder Coated Black Powder Coated Black 3/16" 1 1 1 /2" /2" /2” 1" Replacement Components 1 1 1 1 2 /8" 2 /8" 2 /8” 1 /2" INTERNAL CONNECTOR REPLACEMENT GLOBES REPLACEMENT LEDS AC-180 Internal Connector (Standard) AM-180 Internal Connector (Medium Profile) 1 1 21/8" 2 /8" 2 /8” Channel Configurations 1/2” Factory Radius Factory Miters Standard & High Output Very High Output 11/4” Lamps Outside Bend LS-CG STANDARD HIGH OUTPUT VERY HIGH Clear LSL-19-S-1221/8” LSL-19-H-12 OUTPUT LS-FG 12V Wedge base 12V Wedge base LSL-19-V-12 Left-Side Bend Left-Side Frosted 1900K 1900K 12V Wedge base (26" Min.) 4" O.C. SPACING* LS-SG LSL-27-S-12 LSL-27-H-12 1900K Specify Saber 12V Wedge base 12V Wedge base LSL-27-V-12 Radius LS-AG 2700K 2700K 12V Wedge base 6" O.C. SPACING Flare LSL-30-S-12 LSL-30-H-12 2700K Right-Side Bend LS-YG 12V Wedge base 12V Wedge base LSL-30-V-12 Yellow 3000K 3000K 12V Wedge base 12" O.C. SPACING LS-RG LSL-35-S-12 LSL-35-H-12 3000K Red 12V Wedge base 12V Wedge base LSL-35-V-12 Lamps Inside Bend LS-OG 3500K 3500K 12V Wedge base NOTE: Dimensional drawings Orange LSL-40-S-12 LSL-40-H-12 3500K with lamp orientation18" Orequired..C. SPACING RADIUS OPTIONS LS-GG 12V Wedge base 12V Wedge base LSL-40-V-12 RADIUS AC-MITER Green 4000K 4000K 12V Wedge base Radius bend set up charge (Over 3' Radius) 4000K Factory Miter Cut Standard Profile LS-BG RADIUS-3 24" O.C. SPACING LSL-50-V-12 AM-MITER Blue Radius bend set up charge (Under 3' Radius) LS-PG 12V Wedge base Factory Miter* 4” spacing Cut Medium for candelabra Profile base only R-UNITS Purple 5000K Radius unit charge, Per 8' Max length LSL-AM-V-12 AC-RADIUS 12V Wedge base Internal Bracket Standard Channel Amber AM-RADIUS Internal Bracket Medium Channel Tivoli, LLC. reserves the right to modify this specification without prior notice. Copyright © Tivoli 02/02/20 Page 3 of 3 www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458.
Load more

Recommended publications
  • AEDIT Text Editor Iii Notational Conventions This Manual Uses the Following Conventions: • Computer Input and Output Appear in This Font
    Quick Contents Chapter 1. Introduction and Tutorial Chapter 2. The Editor Basics Chapter 3. Editing Commands Chapter 4. AEDIT Invocation Chapter 5. Macro Commands Chapter 6. AEDIT Variables Chapter 7. Calc Command Chapter 8. Advanced AEDIT Usage Chapter 9. Configuration Commands Appendix A. AEDIT Command Summary Appendix B. AEDIT Error Messages Appendix C. Summary of AEDIT Variables Appendix D. Configuring AEDIT for Other Terminals Appendix E. ASCII Codes Index AEDIT Text Editor iii Notational Conventions This manual uses the following conventions: • Computer input and output appear in this font. • Command names appear in this font. ✏ Note Notes indicate important information. iv Contents 1 Introduction and Tutorial AEDIT Tutorial ............................................................................................... 2 Activating the Editor ................................................................................ 2 Entering, Changing, and Deleting Text .................................................... 3 Copying Text............................................................................................ 5 Using the Other Command....................................................................... 5 Exiting the Editor ..................................................................................... 6 2 The Editor Basics Keyboard ......................................................................................................... 8 AEDIT Display Format ..................................................................................
    [Show full text]
  • COMMAND LINE CHEAT SHEET Presented by TOWER — the Most Powerful Git Client for Mac
    COMMAND LINE CHEAT SHEET presented by TOWER — the most powerful Git client for Mac DIRECTORIES FILES SEARCH $ pwd $ rm <file> $ find <dir> -name "<file>" Display path of current working directory Delete <file> Find all files named <file> inside <dir> (use wildcards [*] to search for parts of $ cd <directory> $ rm -r <directory> filenames, e.g. "file.*") Change directory to <directory> Delete <directory> $ grep "<text>" <file> $ cd .. $ rm -f <file> Output all occurrences of <text> inside <file> (add -i for case-insensitivity) Navigate to parent directory Force-delete <file> (add -r to force- delete a directory) $ grep -rl "<text>" <dir> $ ls Search for all files containing <text> List directory contents $ mv <file-old> <file-new> inside <dir> Rename <file-old> to <file-new> $ ls -la List detailed directory contents, including $ mv <file> <directory> NETWORK hidden files Move <file> to <directory> (possibly overwriting an existing file) $ ping <host> $ mkdir <directory> Ping <host> and display status Create new directory named <directory> $ cp <file> <directory> Copy <file> to <directory> (possibly $ whois <domain> overwriting an existing file) OUTPUT Output whois information for <domain> $ cp -r <directory1> <directory2> $ curl -O <url/to/file> $ cat <file> Download (via HTTP[S] or FTP) Copy <directory1> and its contents to <file> Output the contents of <file> <directory2> (possibly overwriting files in an existing directory) $ ssh <username>@<host> $ less <file> Establish an SSH connection to <host> Output the contents of <file> using
    [Show full text]
  • Clostridium Difficile (C. Diff)
    Living with C. diff Learning how to control the spread of Clostridium difficile (C. diff) This can be serious, I need to do something about this now! IMPORTANT C. diff can be a serious condition. If you or someone in your family has been diagnosed with C. diff, there are steps you can take now to avoid spreading it to your family and friends. This booklet was developed to help you understand and manage C. diff. Follow the recommendations and practice good hygiene to take care of yourself. C. diff may cause physical pain and emotional stress, but keep in mind that it can be treated. For more information on your C.diff infection, please contact your healthcare provider. i CONTENTS Learning about C. diff What is Clostridium difficile (C. diff)? ........................................................ 1 There are two types of C.diff conditions .................................................... 2 What causes a C. diff infection? ............................................................... 2 Who is most at risk to get C. diff? ............................................................ 3 How do I know if I have C. diff infection? .................................................. 3 How does C. diff spread from one person to another? ............................... 4 What if I have C. diff while I am in a healthcare facility? ............................. 5 If I get C. diff, will I always have it? ........................................................... 6 Treatment How is C. diff treated? ............................................................................. 7 Prevention How can the spread of C. diff be prevented in healthcare facilities? ............ 8 How can I prevent spreading C. diff (and other germs) to others at home? .. 9 What is good hand hygiene? .................................................................... 9 What is the proper way to wash my hands? ............................................ 10 What is the proper way to clean? .........................................................
    [Show full text]
  • Powerview Command Reference
    PowerView Command Reference TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents ...................................................................................................................... PowerView User Interface ............................................................................................................ PowerView Command Reference .............................................................................................1 History ...................................................................................................................................... 12 ABORT ...................................................................................................................................... 13 ABORT Abort driver program 13 AREA ........................................................................................................................................ 14 AREA Message windows 14 AREA.CLEAR Clear area 15 AREA.CLOSE Close output file 15 AREA.Create Create or modify message area 16 AREA.Delete Delete message area 17 AREA.List Display a detailed list off all message areas 18 AREA.OPEN Open output file 20 AREA.PIPE Redirect area to stdout 21 AREA.RESet Reset areas 21 AREA.SAVE Save AREA window contents to file 21 AREA.Select Select area 22 AREA.STDERR Redirect area to stderr 23 AREA.STDOUT Redirect area to stdout 23 AREA.view Display message area in AREA window 24 AutoSTOre ..............................................................................................................................
    [Show full text]
  • HP BIOS Configuration Utility FAQ
    Technical white paper HP BIOS Configuration Utility FAQ Table of contents Feature updates ............................................................................................................................................................................ 2 Common questions ....................................................................................................................................................................... 2 For more information ................................................................................................................................................................. 12 Feature updates Version Features 4.0.2.1 Changes config file keyword to BIOSConfig. Changes commands from /cspwdfile and /nspwdfile to /cpwdfile and /npwdfile to match HP SSM. Adds /Unicode command to query if a system supports a Unicode password. Removes BIOS user commands. Maintains backwards compatibility. 3.0.13.1 Allows only one /cspwdfile command. Adds /WarningAsErr command to include warnings in the final BCU return code. 3.0.3.1 Changes commands from /cspwd and /nspwd command to /cspwdfile and /nspwdfile to read passwords from encrypted files created by HPQPswd.exe 2.60.13.1 Adds additional return codes when encountering WMI errors. 2.60.3 Add /SetDefaults command to reset BIOS to factory default. Supports configuration file comments. Common questions Q: The BIOS Configuration Utility (BCU) is an HP utility, so why it does not work on some HP platforms? A: BCU is a command-line utility for controlling various BIOS settings on a supported HP notebook, desktop, or workstation system. It requires a BIOS that supports HP WMI Namespace within the BIOS. HP began integrating CMI/WMI support directly into the BIOS during approximately 2006–2008 for managed business systems, which did not include consumer-based systems or entry-level units. If the system BIOS does not have the required WMI support, BCU does not work. This is not a failure of BCU. It is a limitation of the system BIOS that does include WMI support in the BIOS code.
    [Show full text]
  • LS-3140 Optically Clear Encapsulation Gel
    ADVANCED TECHNOLOGIES LS-3140 Optically clear encapsulation gel DESCRIPTION APPLICATION — Two-part, low outgassing, clear silicone gel — For protection of sensitive photonics assemblies from mechanical shock, thermal shock, dust, and ambient — 1.40 refractive index atmosphere — Low modulus — As an embedding or potting compound for environmental — Cures at room temperature or rapidly with heat protection of electronic assemblies and components, such as LEDs — 1:1 Mix Ratio (Part A: Part B) — For applications requiring low outgassing and minimal volatile components to avoid contamination in sensitive devices — Extended work time allows voids in complex assemblies to fill in and permits time for any trapped air bubbles to float to the fluid surface and escape — UV and heat resistant — Handles stress during thermal cycling without cracking or delaminating — For applications requiring an operating temperature range of -65°C to 240°C (-85°F to 464°F) PROPERTIES Typical Properties Average Result Metric Conv. Standard NT-TM Uncured: Appearance Transparent - ASTM D2090 002 Viscosity, Part A 16,000 cP 16,000 mPas ASTM D1084, D2196 001 Viscosity, Part B 8,500 cP 8,500 mPas ASTM D1084, D2196 001 LS-3140 3 January 2019 Rev. C ADVANCED TECHNOLOGIES Typical Properties Average Result Metric Conv. Standard NT-TM Work Time (<2x viscosity) 24 hours minimum - - - Volume Resistivity, Part A 1 x 1014 ohm·cm minimum - ASTM D1169 024 Volume Resistivity, Part B 1 x 1014 ohm·cm minimum - ASTM D1169 024 UV/Visible Spectrophotometry at 400 nm, 90 %T minimum - ASTM E275 100 1 cm path length Refractive Index 1.40 - ASTM D1218, D1747 018 Cured: 30 minutes at 150°C (302°F) Penetration* 0.4 mm - - 017 Dielectric Strength 350 V/mil 13.8 kV/mm ASTM D149 - Weight Loss (1 hr at 275ºC) 0.8% - - - Moisture Absorption, % gain after 168 hour exposure 0.20 % - - 202 at 85°C (185°F) / 85% R.H.
    [Show full text]
  • A DENOTATIONAL ENGINEERING of PROGRAMMING LANGUAGES to Make Software Systems Reliable and User Manuals Clear, Complete and Unambiguous
    A DENOTATIONAL ENGINEERING OF PROGRAMMING LANGUAGES to make software systems reliable and user manuals clear, complete and unambiguous A book in statu nascendi Andrzej Jacek Blikle in cooperation with Piotr Chrząstowski-Wachtel It always seems impossible until it's done. Nelson Mandela Warsaw, March 22nd, 2019 „A Denotational Engineering of Programming Languages” by Andrzej Blikle in cooperation with Piotr Chrząstowski-Wachtel has been licensed under a Creative Commons: Attribution — NonCommercial — NoDerivatives 4.0 International. For details see: https://creativecommons.org/licenses/by-nc-nd/4.0/le- galcode Andrzej Blikle in cooperation with Piotr Chrząstowski-Wachtel, A Denotational Engineering of Programming Languages 2 About the current versions of the book Both versions ― Polish and English ― are in statu nascendi which means that they are both in the process of correction due to my readers’ remarks. Since December 2018 both versions, and currently also two related papers, are available in PDF format and can be downloaded from my website: http://www.moznainaczej.com.pl/what-has-been-done/the-book as well as from my accounts on ResearchGate, academia.edu and arXiv.org I very warmly invite all my readers to send their remarks and questions about all aspects of the book. I am certainly aware of the fact that my English requires a lot of improvements and therefore I shall very much appreciate all linguistic corrections and suggestions as well. You may write to me on [email protected]. All interested persons are also invited to join the project Denotational Engineering. For more details see: http://www.moznainaczej.com.pl/an-invitation-to-the-project Acknowledgements to the Polish version Since June 2018 a preliminary version of the Polish version has been made available to selected readers which resulted with a flow of remarks.
    [Show full text]
  • 013-2009: Secret Sequel: Keeping Your Password Away from The
    SAS Global Forum 2009 Applications Development Paper 013-2009 Secret Sequel: Keeping Your Password Away From the LOG Paul D Sherman, San Jose, CA Arthur L. Carpenter, CA Occidental Consultants ABSTRACT Passwords are things not to be shared. As good SAS® programmers we don't hard-code our passwords in our programs, but keep them in separate files or macro variables. However this is not enough! Unfortunately the casual (or malicious) user can "turn on" macro debugging utilities like MPRINT, MLOGIC or SYMBOLGEN and literally read our password right from the LOG, in plain view. This paper presents a series of simple methods to keeping your secret password secret when accessing remote databases with PROC SQL. Skill Level: Beginning Base/SAS, Macro, and SAS/ACCESS KEY WORDS PROC SQL, SQL pass through, password, SYMBOLGEN THE PROBLEM WITH PASSWORDS Although we generally do not need to use passwords and user id's when accessing SAS data tables, it is not at all unusual to need them when accessing data base systems such as Oracle or DB2. When the process includes SQL pass through, the user id and password must be included in the SAS program. It is the inclusion of this sensitive information in the SAS program that we are addressing in this paper. You have been there. Time is short, you are in a hurry, and you are creating programs on-the-fly. In cases like this it is so very easy to simply hardcode the password. Proc SQL noprint; connect to odbc(dsn=dbprod uid=mary pwd=wish2pharm); . code not shown .
    [Show full text]
  • Programming the Basic Computer 1 PROGRAMMING the BASIC COMPUTER
    Programming the Basic Computer 1 PROGRAMMING THE BASIC COMPUTER Introduction Machine Language Assembly Language Assembler Program Loops Programming Arithmetic and Logic Operations Subroutines Input-Output Programming Computer Organization Programming the Basic Computer 2 Introduction INTRODUCTION Those concerned with computer architecture should have a knowledge of both hardware and software because the two branches influence each other. Instruction Set of the Basic Computer Symbol Hexa code Description AND 0 or 8 AND M to AC m: effective address ADD 1 or 9 Add M to AC, carry to E M: memory word (operand) LDA 2 or A Load AC from M found at m STA 3 or B Store AC in M BUN 4 or C Branch unconditionally to m BSA 5 or D Save return address in m and branch to m+1 ISZ 6 or E Increment M and skip if zero CLA 7800 Clear AC CLE 7400 Clear E CMA 7200 Complement AC CME 7100 Complement E CIR 7080 Circulate right E and AC CIL 7040 Circulate left E and AC INC 7020 Increment AC, carry to E SPA 7010 Skip if AC is positive SNA 7008 Skip if AC is negative SZA 7004 Skip if AC is zero SZE 7002 Skip if E is zero HLT 7001 Halt computer INP F800 Input information and clear flag OUT F400 Output information and clear flag SKI F200 Skip if input flag is on SKO F100 Skip if output flag is on ION F080 Turn interrupt on IOF F040 Turn interrupt off Computer Organization Programming the Basic Computer 3 Machine Language MACHINE LANGUAGE Program A list of instructions or statements for directing the computer to perform a required data processing task Various types of
    [Show full text]
  • C D E F G M P
    INDEX C G capability l3-vservice command 1-2 gunzip command 2-123 cd command 2-8, 2-119 cdp advertise command 2-9 M clear cdp command 2-13 clear cli history command 2-14 media command 2-135 clear cores command 2-15 clear counters command 2-16 P clear debug-logfile command 2-17 clear line command 2-42 password strength-check command 2-138 clear logging logfile command 2-43 ping vsn command 1-8 clear ntp statistics command 2-44 port-profile command 1-13 clear ssh hosts command 2-79 pwd command 2-141 clear user command 2-82 clear vsn connection command 1-3 clock set command 2-85, 2-128 R related documents 1-xv D reload command 2-142 reload module command 2-143 debug logfile command 2-110 rmdir command 2-144 debug logging command 2-112 run-script command 2-148 dir command 2-114 Documentation Feedback 1-xv S E send command 2-150 setup command 2-151 echo command 2-115, 2-118 show aaa command 3-2 show accounting command 3-6 show ac-driver command 3-4 F show banner command 3-8 find command 2-122 show boot command 3-9 show cdp command 3-11 Cisco Virtual Security Gateway for Microsoft Hyper-V Command Reference, Release 5.2(1)VSG1(4.1) OL-28944-01 IN-1 Index show cli command 3-13 show telnet server command 3-91 show clock command 3-15 show terminal command 3-92 show copyright command 3-16 show user-account command 3-94 show cores command 3-18 show users command 3-95 show debug command 3-19 show version command 3-96 show debug-filter command 3-21 show vnm-pa command 3-97 show environment command 3-22 show vsn brief command 1-22, 1-25, 1-38, 1-40
    [Show full text]
  • Standard TECO (Text Editor and Corrector)
    Standard TECO TextEditor and Corrector for the VAX, PDP-11, PDP-10, and PDP-8 May 1990 This manual was updated for the online version only in May 1990. User’s Guide and Language Reference Manual TECO-32 Version 40 TECO-11 Version 40 TECO-10 Version 3 TECO-8 Version 7 This manual describes the TECO Text Editor and COrrector. It includes a description for the novice user and an in-depth discussion of all available commands for more advanced users. General permission to copy or modify, but not for profit, is hereby granted, provided that the copyright notice is included and reference made to the fact that reproduction privileges were granted by the TECO SIG. © Digital Equipment Corporation 1979, 1985, 1990 TECO SIG. All Rights Reserved. This document was prepared using DECdocument, Version 3.3-1b. Contents Preface ............................................................ xvii Introduction ........................................................ xix Preface to the May 1985 edition ...................................... xxiii Preface to the May 1990 edition ...................................... xxv 1 Basics of TECO 1.1 Using TECO ................................................ 1–1 1.2 Data Structure Fundamentals . ................................ 1–2 1.3 File Selection Commands ...................................... 1–3 1.3.1 Simplified File Selection .................................... 1–3 1.3.2 Input File Specification (ER command) . ....................... 1–4 1.3.3 Output File Specification (EW command) ...................... 1–4 1.3.4 Closing Files (EX command) ................................ 1–5 1.4 Input and Output Commands . ................................ 1–5 1.5 Pointer Positioning Commands . ................................ 1–5 1.6 Type-Out Commands . ........................................ 1–6 1.6.1 Immediate Inspection Commands [not in TECO-10] .............. 1–7 1.7 Text Modification Commands . ................................ 1–7 1.8 Search Commands .
    [Show full text]
  • Viewmarq Hardware / Software User Manual Creating and Previewing
    HAPTER CREATING AND CCHAPTER PREVIEWING MESSAGES 55 In this Chapter... Creating and Previewing Messages ..............................................................................5-2 The Software Workspace ...............................................................................................5-3 Select the ViewMarq Size .............................................................................................5-3 Saving the Message .......................................................................................................5-4 Open a Saved Message �������������������������������������������������������������������������������������������������5-5 Text Editor Overview .....................................................................................................5-6 Software Purpose .........................................................................................................5-6 Supported Characters ...................................................................................................5-6 Message Length ...........................................................................................................5-6 Message Formatting ......................................................................................................5-7 Character Toolbar ........................................................................................................5-7 Line Toolbar .................................................................................................................5-8
    [Show full text]