WILLIAMS SIDE MOUNT & RINGS WEAVER WEAVER ADAPTER BASE WILCOX INDUSTRIES Solve Difficult TACTICAL SCOPE RINGS For Enfield, 10/22® & Grooved COMP-M MOUNT Scope Mounting Problems Receiver .22’s For Ultra-Secure Mounting Strong, Lightweight, Adjustable mounts attach Of Large-Objective Scopes One-piece mount allows use of Weaver Tactical Mount For Secure ba to the side of the receiver. rings on these guns. Attachment Of Comp Series Sights Exclusive, eccentric base Oversized rings provide extra SPECS: Aluminum, Blue. TO-10 Positions 1 7 bushing allows the rear ring contact area for ultra-secure scope further forward and ⁄4" (6.3mm) higher. Uses ⁄8"/1" Tip-Off Compact tactical mount securely positions 7 to be centered for maximum mounting of large optics on Mounts or ⁄8"/1" Top Mount Rings. TO-1 requires drilling and tap- an Aimpoint red dot optic the correct height 7 windage adjustment. ab hard-recoiling, long-range rifles ping of receiver. Note: ⁄8"= 22.2mm, 1"= 2.5cm. above a flattop receiver rail. Fits Aimpoint SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 such as sniper rifles. Fits all Weaver-style bases. Six no-strip, no- STOCK # FITS PRICE CompC3/M2/ML2/M3/ML3 series, 3XMAG slip Torx® screws hold down the ring cap to ensure the scope keeps magnifier, and other optics with 30mm tube that require single- fits centerfire rifles with left-hand receiver wall radius. SM-71 fits #955-200-001AK TO-1 Lee-Enfield 1, 4 or 5 5E15Z90 $ 18.99 most lever and bolt action rifles with a flat, left-hand receiver wall. its position even under heavy recoil. Oversize hex nuts allow ring mounting. Skeletonized construction provides full support ab #955-200-009AK TO-9 Blue Ruger® 10/22 5E04Z19 $ 6.99 rings & bases Lee Enfield Mount Plate for use with SM-70 base on round re- quick removal or attachment of optics in dynamic situations. without the weight of excess metal for an exceptionally strong, ceiver SMLE No.1 rifles. QC Split Rings - 1" (2.5cm) dia. Positions SPECS: Aluminum, hardcoat anodized, matte black. Height mea- #955-200-119AK TO-9-M Matte Ruger 10/22 5E04Z72 $ 5.99 solid, yet lightweight mount. Four, steel, hex-head cap screws scope to the left of the centerline of the bore. QC HCO Rings - 1" sured from top of base to underside of scope body. 1" High - .400" #955-200-010AK TO-10 .22 cal. rifles anchor the top ring half to the mount to ensure full contact with dia. High HCO and High Split rings have longer stud and .200" thick high. Accepts scopes with objectives up to 44mm dia. 1" Extra with grooved receivers 5E05Z00 $ 7.99 sight body to prevent slippage. Rail Grabber clamping system sub-ring base to accommodate large objective scopes. Positions High - .525" high. Accepts objectives up to 50mm dia. 30mm High secures the mount to receiver and maintains sight alignment the scope directly over the centerline of the bore. - .495" high. Accepts objectives up to 44mm dia. even under the battering of sustained rapid fire. Unique, captive #955-000-138AK 1" Tactical Rings, High 5E37A10. . $ 43.99 SAMSON MANUFACTURING CORP. cross-bolt is divided lengthwise; one side provides a slop-free fit MODEL FITS #955-000-139AK 1" Tactical Rings, Extra-High, in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half SM-70 Mauser 91, 93, 94, 95, 96, 98**; Rem. 600, 660, 5E37A10...... 43.99 QUICK-FLIP MOUNT turn exposes the side that snugs into the narrower Weaver-type 700, 721, 722, 7; Savage 110, 111; Win. 54, 70, 670, 770; Wthby #955-000-140AK 30mm Tactical Rings, High, slot. An oversized thumb nut with deep grasping grooves lets the MK-V, Vanguard, British SMLE #1 (Round Receiver)*; BSA Majestic, 5E37A10...... 43.99 FOR AIMPOINT 3XMAG operator tighten the mount with hand pressure only; coin slot in Monarch, CF-2; Husqvarna Crown Grade; Interarms Mark X, Howa the head lets you apply additional tightening force with a U.S. 1500 ,1700; Japanese M38 (6.5), M99 (7.7)**; Mossberg 800, 3000; Flips Magnifier Aside For Instant nickel or quarter. ab P14/17 Enfield**; Swiss 1911 (7.5); U.S. Military 1903/1903A3. WEAVER SEE-THRU MOUNT RINGS Transition From Long-Range SPECS: Aluminum, hardcoat anodized, matte black finish. Height SM-71 Marlin 30AS, 36, 336, 93, 44, 444, 1895; British SMLE #4, For Weaver Bases To Close-Range Targeting measured from top of rail to bottom of scope tube: 1.120" (2.84cm). 5 (Flat Receiver); Remington 14, 141; Russian 1891 (7.62); Winchester 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 71, 86, 92, 94 (with FP or 5D sight), 95. Extra wide, oval design for instant Quick-transition mount combines secure, correct-height attachment of 3XMAG magnifier, and other optics that require a single 30mm * Must use Lee-Enfield #1 Mounting Plate with mount. use of either iron sights or scope. an Aimpoint 3XMag behind a com- ring mount. ** Must use Shim Pack with mount. Standard See-Thru or Extension #100-004-257AK Comp-M Mount 4B128X42. . . . $ 164.99 3 patible red dot sight with a spring- #962-070-070AK SM-70 Side Mount Base 2F40H02. $ 46.99 style that adds approx­imately ⁄4" #962-070-071AK SM-71 Side Mount Base 2F40H02. . . 46.99 (19mm) eye relief adjustment. Fit loaded mechanism that flips the #962-070-100AK Shim Pack 2F05H45...... 6.99 Weaver Top Mount Bases. Excel- magnifier aside for instant return to unmagnified operation of Extension Standard #962-000-003AK Lee-Enfield Mount Plate 2F13D73. .15.99 lent for mounting large objective sight. Lets you shift from long-range to short-range targeting #962-070-101AK QC Split Rings 2F22H01...... 25.99 diameter scopes, too. ab almost instantly. Securely installed to any MIL-STD 1913 Pica- Brownells /EOTECH #962-070-102AK QC HCO Rings 2F27H17...... 31.99 SPECS: Steel, satin blue (SB) or matte blue (MB) finish. For 1" tinny receiver rail with a robust locking bar and bolt system, so #962-070-103AK QC High Split Rings 2F22H95. . . .26.99 (2.5cm) scopes. Sold in pairs. the magnifier stays correctly positioned behind the sight. Mount CQB T -DOT HOLOGRAPHIC SIGHT bolts directly to the factory holes in the bottom of the 3XMag #962-070-104AK QC High HCO Rings 2F31H11...... 36.99 #955-495-100AK See-Thru Rings (SB) 5E24B45. . . $ 28.99 “T” Aiming Point #955-495-230AK See-Thru Rings (MB) 5E24B86. . . 28.99 (machine screws included)—no gunsmithing required. Ambi design allows installation with lever and flip path on the left Calibrated To Eliminate #955-495-500AK Ext. See-Thru Rings (SB), Guesswork In Close-Range WEAVER TOP MOUNT RINGS 5E28B48...... 33.99 or right side. Quick-flip tab has deep grooves for easy activation with a flick of your thumb. ab Targeting Now In Stainless Finish #955-495-101AK Ext. See-Thru Rings (MB), SPECS: Aluminum, hardcoat anodized, matte black. 5E30B74...... 36.00 The Brownells CQB T-Dot Heights: Low and Me- #100-004-239AK Quick-Flip Mount w/Bolt-On Base, #955-495-250AK Dual Extension See-Thru Rings (MB), Sight is designed for com- dium for scopes w/objective 1B146P94...... $ 195.99 5E33B64...... 39.99 bat and competition shoot- diameters to approximately ers who frequently address 1.75"(44.45mm). High for For more choices of SAMSON MFG. targets at close quarters. It objectives­ above 1.75". Ex- WEAVER SEE-THRU MOUNTS corrects a common problem tra High for scopes with MOUNTS visit brownells.com Integral Mount Lets You Use with combat-zeroed optics objectives up to 60mm. ab Both Iron Sight & Scope mounted on an AR-type SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. rifle: the point of impact is Satin Blue, Matte Blue or brushed Stainless finish. Height (above SOG ARMORY Wide oval opening below the scope significantly lower than the Reticle accessories base): 1" diameter - Low, .090" (2.28mm); Med., .164" (4.16mm); allows fast, unrestricted use of iron point of aim at close quarters High, .332" (8.43mm); X-High, .560" (14.2mm). 30mm diameter - sights when you’re too close to use a AIMPOINT distances. Built by EOTech exclusively for Brownells and based & Low, .290" (7.3mm); High, .485" (12mm). 2 oz. (56 g). scope. All-steel, four screw top strap MOUNT on the popular EOTech EXPS2, the CQB T-Dot eliminates the STOCK # HEIGHT SIZE FINISH PRICE gives 210° surface contact for recoil- “guesstimating” when aiming at these targets. It retains the par- #955-490-001AK Low 1" Satin 5E24Z14 $ 28.00 proof strength. Integral aluminum base means lighter weight. Strong, Lightweight; ent design’s 65 MOA circle illuminated reticle with two aiming #955-490-003AK Low 1" Matte 5E24Z14 $ 27.99 Front and rear mounts interchange for greater eye relief. ab Standard & Offset Models points calibrated for 50-200 yards and 500 yards. The bottom optics SPECS: Aluminum lower half, steel top straps and screws. Satin of the T-Dot’s circle is left open, with a “T” indicating a precise #955-490-002AK Low 1" Stainless 5E36Z90 $ 42.99 blue finish. 1" (2.5cm) I.D. Overall height approx. 2" (5.1cm). 3 oz. Single-ring mounts of aiming reference zeroed for about 7 yards. All aiming points are #955-490-201AK Med. 1" Satin 5E24Z14 $ 27.99 (85 g) wt. per pair. strong, lightweight aluminum secure your Aimpoint or similar calibrated for 5.56mm NATO ammunition. Windage and eleva- aiming device to any Picatinny or Weaver-style rail. Extra-large #955-490-203AK Med. 1" Matte tion are adjustable in ½ MOA increments. 5E24Z14 $ 28.00 STOCK # FITS PRICE ring surface area ensures zero scope movement under recoil, #955-490-111AK Med. 1" Stainless 5E36Z90 $ 42.99 #955-401-713AK Marlin 336 5E12A97 $ 15.99 with six Torx T-15 screws (wrench included) securing the ring The CQB T-Dot clamps directly to a MIL-STD 1913 Picatinny #955-490-301AK High 1" Satin 5E24Z14 $ 28.00 #955-401-712AK Rem. 700 5E12A97 $ 15.99 halves. A cross-bolt with integral recoil lug and .510" diameter rail (only 2 ¾" rail space required) with a built-in quick-detach hex nut anchor mount to the rail. Standard model elevates the throw-lever mount. A built-in riser enables lower one-third co- #955-490-303AK High 1" Matte 5E24Z14 $ 28.00 #955-401-714AK Rem. 4, 6, 7400, 7600 5E12A97 $ 15.99 sight to the correct height to co-witness with a back-up iron witness with A2-type iron sights. The reticle has 20 brightness #955-490-302AK High 1" Stainless 5E36Z90 $ 42.99 #955-401-715AK Rem. 742, 740, 760 5E12A97 $ 15.99 sight. Cut-out in the base reduces weight without sacrificing settings selected using the control buttons on the left side and #955-490-401AK X-High 1" Satin 5E24Z14 $ 27.99 #955-401-723AK Ruger 77/22® & Ranch 5E33A64 $ 39.99 strength. Cantilever-style Offset model provides co-witness el- is powered by one CR-123 lithium battery (included), easily ac- #955-490-403AK X-High 1" Matte 5E24Z14 $ 28.00 evation and positions sight 1¼" forward to make room for a rear- cessed through the side cap. Sealed, non-magnifying optics are #955-491-210AK Low 30mm Matte 5E24Z86 $ 28.99 mount night vision device. Both models accept 30mm diameter fogproof, shatter-resistant, and anti-glare coated. scope tubes; aluminum reducer included for mounting a 1" tube. SPECS: Aluminum housing, hardcoat anodized, matte black. 3.5" #955-491-200AK High 30mm Matte 5E24Z86 $ 28.99 SPECS: Aluminum, hardcoat anodized, matte black. Steel Torx long x 2.4" wide x 2.8" high. 11.2 oz. (317g) wt. Windage and eleva- TOP MOUNT EXTENSION RINGS - #955-490-500AK High 1" Satin 5E28Z93 $ 33.99 screws cross-bolt, oxide finish, black. Fits 30mm and 1" diameter tion adjustment range +/- 40 MOA in ½ MOA clicks (½" at 100 yards). Extension Top Mount Rings, 1" and #955-490-503AK High 1" Matte 5E28Z93 $ 33.99 sights. Standard – 1" (2.5cm) long, 1" high from top of base to Brightness adjustment range: 146,000:1, brightest to lowest. 20 3 3 30mm diameter. Moves eye relief ⁄4", #955-490-610AK Hi-Dual 1" Satin 5E31Z03 $ 36.00 bottom of ring. Offset – 3 ⁄8" (8.6cm) long, 1" high from top of base brightness settings. Uses one (1) CR-123A lithium battery; approx. forward or backward. Sold by the pair, 1 #955-490-450AK Hi-Dual 1" Matte 5E31Z03 $ 35.99 to bottom of ring. 600 hour battery life. Operating temperature range -40° to +150° F. standard and 1 extension ring or “Dual” #100-003-048AK Standard Mount 9A47Y95 . . . . $ 59.95 Submersible to 10 ft depth. style with two extension rings. #955-000-079AK High 30mm Matte 5E35U10 $ 40.99 #100-003-047AK Offset Mount 9A63Y95...... 79.95 #080-000-971AK CQB T-Dot Sight 9K00HDZ . . . $ 549.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 264 SINCE 1939 Office/Tech: 641-623-5401 AIMPOINT

RED DOT OPTICAL SIGHTS optics Models cro’s field of view, so they won’t interfere with the Micro’s sight 100 yds (13mm @ 100m). ACET = 50,000 hrs on one battery. Includes tion for improved accuracy when engag- Rugged, No-Fail Sight Systems For Hunting, picture. Locking, quick-release lever for fast attachment and re- lithium battery (3v, CR 1/3N). Includes 30mm Weaver-style mounting ing small targets at long ranges. Durable Target Shooting & Tactical Applications moval from rail; machined recoil lug and side rail clamp ensure ring and Allen wrench. Submersible to 15 feet (5m). rubber housing improves gripping sur- a rock solid installation. Provides the correct height for use with #100-002-976AK CompC3 2MOA 7A00VBX. . . . .$ 437.00 face and shields the module from damage Parallax-free aiming with a single, bright glowing red dot; Aimpoint 3XMag Magnifier. Requires 21/8" (5.4cm) of rail space. caused by shock. Mounts to rail using a & proven to be the fastest, most accurate sighting system avail- Dovetail Mount replaces the base that came with your Micro COMPM3/COMPML3 SERIES - CompM3 30mm scope ring or the quick-detach Aim- able. Exclusive Advanced Circuit Efficiency Technology (ACET) is a fully redesigned version of the sight so you can mount it on any gun with a nominal 3/8" dovetail point TwistMount listed below. Mounting accessories greatly improves the useable life of the single 3-volt battery. on the receiver. CompM2 and provides up to five years or dismounting will not change point-of-impact of your sight. In- ACET sights can last nearly 50,000 hours (over five years on SPECS: LRP - Steel, matte black finish. LT660 & Dovetail - Alumi- of constant power-on usage from a single ternal adjustments allow alignment with your pre-zeroed sight. setting 7 out of 10) of constant use. AA battery model can last num, hard anodized, matte black. battery. Band pass coated objective lens is up to 80,000 hours with a single battery. All sight housings are fully compatible with all generations of Specs: Aluminum, anodized, dark grey, rubber coated, black. 4.3" machined or extruded from 6000 series aluminum for maximum #100-003-575AK LRP Quick-Release Conversion Kit, night vision devices, but works especially (11cm) long x 1.7" (4.4cm) high, 1.6" (4.1cm) diameter. 7.1 oz. (200g) strength without unecessary added weight. Lens surfaces are op- 7A00VBX ...... $ 36.00 well with 3rd generation NV technology wt. Submersible to 67 feet (20m). Requires 30mm mounting ring tically ground (not cast) for superior clarity. Proprietary housing #100-003-578AK LT 660 QD Riser Mount 7A00YTP . 125.00 used by military and law enforcement for installation. and lens sealing material keeps electronic and lens surfaces dry, #100-003-576AK Dovetail Mount 7A00HDZ . . . . . 77.00 personnel. CompML3 includes multi-layer, anti-reflective lens #100-002-981AK 3XMag Magnifier 7A00YTP . . . $ 563.99 fog-free and fully functional regardless of weather conditions. 9000SC - Medium length sight has nine coatings designed for low light or daylight tactical operations TWISTMOUNT FOR 3X MAGNIFIER - Quick- All models feature non-reflective, Mil-Spec anodized finishes. ab daylight brightness settings, and is ideal where NV capability is neither required nor practical. Both mod- detach mount for Aimpoint 3x Magnifier lets els available with a 2 MOA dot; CompML3 also available with a 4 MICRO SERIES - Ultra Compact to reduce for use with any semi-auto firearm and you change instantly from long-range to CQB MOA dot for close combat applications. Both models include a re- weight and bulk, plus easy to remove and weapons that produce extra heavy re- mode. Depress the release lever, twist the Mag- movable, outer, black rubber armor cover. Requires an Aimpoint install on multiple firearms. Provides an coil. 30mm exterior tube diameter helps nifier, and lift it off for an unencumbered close- 30mm ring or equivalent for installation (available separately). easy-to-see, bright red LED aiming dot for provide unlimited field of view and eye range sight picture. Low-profile base clamps to SPECS: Anodized finish, matte black. 5.1" (130 cm) long x 2.2" hunting and tactical applications. Both relief, plus parallax-free aiming at all Picatinny-style rail; extra-long scope ring pro- (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnification. Windage & El- models include an integral Weaver-style distances. Available with a 4MOA dot vides ample surface contact for a no-slip grasp evation: ½" adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 mount that attaches easily without knobs, and submersible to 15 feet. on the magnifier body. May also be used as a quick-detach mount hrs on one battery on daylight setting, 500,000 hrs on NV setting and is keyed to the sight body to absorb SPECS: Anodized finish, matte black. 6.3" (16 cm) long x 2.2" for other 30mm optics. Extra TwistMount bases sold separately, (CompM3 only). Includes lithium battery (3v, DL 1/3N), rubber flip- recoil. Fully adjustable for windage and elevation; adjustment (5.5cm) wide. 7.4 oz. (210 g) wt. 1X magnification. Windage & so you can quickly move your Magnifier from one rifle to another. up lens covers and rubber sight body shield. Submersible to 150 tool is an integral part of the adjustment knob caps so you never Elevation: ½" adjustment @ 100 yds. (13mm @ 100m). ACET = Co-Witness Spacer raises sight axis for proper co-witnessing feet (45m). loose it. Micro H-1 is designed for hunting/sporting applications 50,000 hrs on one battery. Includes lithium battery (3v, CR 1/3N), with factory-height backup iron sights. Comes with four, extra- #100-002-963AK CompM3 2 MOA 7A00VBX. . . .$ 586.00 and is submersible to 15 feet. Can be mounted on shotguns, ri- rubber flip-up lens covers, two (2) 30mm Weaver-style mounting length hex head screws and Allen wrench. #100-002-964AK CompM3 4 MOA 7A00TPU. . . . .586.00 fles, handguns, and bows, and includes 12 daylight settings and rings and Allen wrench. Minimum/Maximum C-To-C Ring Spacing: SPECS: Aluminum, hardcoat anodized, matte black. #100-002-965AK CompML3 2 MOA 7A00VBX. . . . 526.00 one extra-bright setting. Micro T-1 is designed for tactical use; 2" (5cm)/4.5" (15cm). #100-003-597AK TwistMount Complete, includes band pass lens coating with 6 night vision/7 daylight #100-002-968AK 9000SC 4MOA 7A00YTP . . . . .$ 406.00 REPLACEMENT RUBBER COVER FOR COMPM3/ML3 - Factory 7A00YTP...... $ 180.00 settings, so it’s fully compatible with all generations of Night 9000L SERIES - Provides fast, both replacement for the removable rubber #100-003-599AK TwistMount Base, Only 7A00HDZ . 113.99 Vision Devices, and submersible to 80 feet. Features integral eyes open aiming; increased length of cover that comes with CompM3/ML3. #100-004-137AK Co-Witness Spacer 7A00XCH. . . . 28.00 Picatinny base. Replace a worn or damaged cover, or put body tube provides proper ring spac- ® SPECS: Anodized, matte black. 2.4" (6.2cm) long x 2.4" wide x 1.6" TENEBRAEX KILLFLASH ARD - Anti-Reflec- ing on most firearms. Built to shrug a Coyote tan cover on your sight to help (3.6mm) high, including mount. 3.7 oz. (105g) wt including mount. tion Device screws into front lens opening of off the heaviest recoil. 1X magnifica- it blend in on a rifle with a desert camo 1X magnification. Both models available with 2 or 4 MOA dot (see 9000SC and Comp series sights. Honeycomb tion with a 2 MOA dot and submers- pattern. below). ½" adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 filter disperses light to prevent reflections from ible to 15 feet. Features an exterior SPECS: Synthetic rubber, Black or Coyote hrs on one battery. Includes lithium battery (3v, DL2032) and rubber front lens giving away your position without ad- tube diameter of 30mm for maximum (tan). Fits Aimpoint CompM3/ML3 series red dot optical sights. flip-up lens covers. versely affecting sight picture. Fits under the field of view and eye relief, plus parallax-free aiming at all ranges #100-003-607AK Rubber Cover for CompM3/ML3, Black, #100-003-004AK Micro H-1, 4 MOA 7A00YTP. . . $ 588.00 lens cover without modification. with 9 daylight settings. 7A00VBX ...... $ 29.00 100-009-907AK Micro H-1, 2 MOA 7A00ZAY. . . . 606.00 SPECS: Anodized finish, matte black. 7.9" (20 cm) long x 2.2" (5.5cm) #100-003-606AK Rubber Cover for CompM3/ML3, Coyote, SPECS: Polymer, black. Fits 9000SC and Comp series sights. #100-003-003AK Micro T-1, 4 MOA 7A00HDZ. . . . 678.00 ® wide. 8.1 oz. (230 g) wt. 1X magnification. Windage & Elevation: 7A00YTP...... 29.00 #100-003-624AK KillFlash ARD 7A39H99 . . . . .$ 42.99 100-009-905AK Micro T-1, 2 MOA 7A00XCH . . . . 678.00 ½" adjustment @ 100 yds (13mm @ 100m). ACET = 50,000 hrs on COMPM4/COMPM4S - The latest civil- REPLACEMENT LENS COVERS - Replace lost or broken lens one battery. Includes lithium battery (3v, CR 1/3N), rubber flip-up MICRO H-1 w/AR-15 FLATTOP MOUNT - ian version of the U.S. Army’s M68 CCO cover with the factory lens covers, two (2) 30mm Weaver-style mounting rings and Allen AR-specific version of the popular Micro H-1 (Close Combat Optic), and the most original part. Flip-Up wrench. Minimum/Maximum C-To-C Ring Spacing: 2.4" (6cm)/6.1" has an integral, quick-release riser mount, advanced sight produced by Aimpoint. Covers – Spring-loaded (15.5 cm). ready to install on any AR-15/M16/M4 flat- Super efficient electronics deliver up polymer covers flip top rifle. Riser aids in comfortable, heads-up #100-002-972AK 9000L 2MOA 7A00HDZ . . . . . $ 406.00 to eight years of continuous use from a open with finger pres- aiming, while providing the correct elevation single AA battery. Optics feature band sure. Available in black to co-witness with mil-spec “iron” sights. Po- COMPML2 - Features a 4 MOA dot for pass objective lens coating for superb 1 or see-through clear ⁄3 close quarter combat and require an sitions the backup sights in the lower of light transmission and optimum 3rd Tight, friction-fit installation. Fit non-magnifying (1x) 9000 and Aimpoint 30mm ring or equivalent for the Micro’s field of view for instant transition generation NVD compatibility. Newly improved rotary bright- Comp series, including C3, MPS3, and M4/M4S. Rear covers fit installation, ring not included. Reticle to them. Quick-detach LRP (Lever Release Picatinny) mount ness switch provides 7 NVD settings and 9 daylight settings, all Aimpoints with 30mm rear objectives, including Comp and has 9 daylight brightness settings – ide- lets you remove the H-1 from the rifle with a flip of the locking plus one extra-bright setting for outdoor use with anti-reflective 9000 series. Military – One-piece, rubber, slip-on style with loop al for law enforcement and other tactical lever and return it without loss of zero. goggles. Excellent choice for varmint hunters needing a rugged that fits over quick-release knob on QRP and QRW mounts. Fits applications where NV capability is not SPECS: Aluminum, anodized finish, matte black. 2.4" (6.1cm) long, red dot optic with low light capabilities. Integral, QRP2 mount Comp M2, ML2, M3, ML3, M4, and M4S. Micro – One-piece, rub- required. 1.6" (4.1cm) wide, 2.6" (6.7cm) high, including mount and spacer. (no additional mount ring required) features a single, oversize ber, “bikini”-style cover for Micro series sights. 6 oz. (170g) wt. SPECS: Anodized finish, matte black. 5.1" thumbscrew for fast installation and removal from Picatinny #100-006-838AK Micro H-1 w/LRP Mnt 7A00DZA. $ 662.00 (130 cm) long x 2.2" (5.5cm) wide. 7.8 oz. (220 g) wt. 1X magnifica- SPECS: Fits Aimpoint Red Dot sights as indicated above. Flip-Up rails. Mount includes a separate vertical spacer for fast adapta- Covers – Molded polymer, black. Clear models have clear polymer tion. Windage & Elevation: ½" adjustment @ 100 yds. (13mm @ tion to a wide range of firearms. Available with versatile 2MOA MICRO MOUNTS - 100m). Submersible to 75 feet (25 m). ACET = 10,000 hrs on one windows in lid. Military & Micro – Rubber, black. Precision machined dot. Can be quickly converted to a 3X, long-range red dot reticle QD Riser DL 1/3N 3-volt lithium battery (included). Includes rubber flip-up #100-003-612AK Flip-Up Front Cvr, Blk 7A00HDZ. $ 18.00 aluminum and steel scope by installing the optional Aimpoint 3XMag magnifying lens covers. module listed below. COMPM4S has the same great operating #100-003-618AK Flip-Up Front Cvr, Clear 7A00HDZ . 18.00 components provide #100-003-616AK Flip-Up Rear Cover, Blk 7A00YTP. .18.00 LRP Conversion #100-002-961AK CompML2 4MOA 7A00YTP. . . .$ 464.00 features as the COMPM4, but positions the battery compart- more mounting op- #100-003-621AK Flip-Up Rear Cvr, Clear 7A00HDZ. .18.00 tions to increase the ment low, on the right side of the unit for less chance of snagging COMPC3 SERIES - Compact red dot #100-003-623AK Military Lens Cover 7A00VBX . . . 12.00 versatility of your and improved view over the top of the optic. sight with 2 MOA dot for up-close #100-003-625AK Micro Lens Cover 7A00HDZ. . . . 18.99 Aimpoint Micro se- SPECS: Anodized finish, matte black. 4.7" (120 cm) long x 2.8" shooting that demands both speed and (7.2m) wide x 2.8" high. 11.8 oz. (335 g) wt. including mount. 1X ries red dot sight. accuracy. Built to the same exacting REPLACEMENT DL1/3N BATTERY - Factory recom- LRP Quick-Release Conversion Kit converts the mount that magnification. Windage & Elevation: ½" adjustment @ 100 yds mended lithium battery fits 9000 series, CompC3, tolerances as the entire Aimpoint line (13mm @ 100m). ACET = 80,000 hrs on one battery on daylight came with your Micro to a quick release configuration that al- for fail-proof performance. Short length CompC SM, CompM2, CompML2, CompM3, lows the sight to be removed from the firearm with the flip of setting, 500,000 hrs on NV setting. Includes alkaline battery (1.5v, CompML3, Laser Aiming Device LPI, 1000 series, allows easy mounting for a variety of AA). Submersible to 150 feet (45m). the locking lever. Return sight to firearm without loss of zero applications; 30mm Weaver-style ring is 3000 series, 5000 series, 7000 series, Comp, CompC, in just seconds. QD Riser Mount allows mounting the Micro on #100-003-002AK CompM4 2MOA 7A00VBX. . . . $ 789.99 Comp XD, CompM, CompM XD, CompML, CompML included. Has nine daylight brightness settings, removable lens #100-003-734AK CompM4S 2MOA 7A00VBX . . . . 813.00 any flattop AR-15/M16/M4 at the ideal height for quick, precise, covers, dial covers, and a cushioned, rubber ocular lens. XD. head-up target acquisition. Lets you to retain and co-witness SPECS: Anodized, matte, black. 4.7" (12cm) long x 2.2" (5.5cm) wide 3XMAG MAGNIFIER - Mounts on a Picatinny rail directly be- SPECS: 3-volt DL1/3N lithium battery. your rifle’s factory iron sights through the lower 1/3 of the Mi- x 2.2" high. 7.1 oz. (200g) wt. Windage & Elevation: ½" adjustment @ hind any Aimpoint red dot optical sight to provide 3X magnifica- #100-005-215AK DL1/3N Lithium Battery 5Z04V75. $ 4.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 265 BURRIS RED DOT REFLEX SIGHTS AIMPOINT PATROL RIFLE OPTIC BURRIS AR-332 PRISM SIGHT GG&G EOTECH LENS COVER MODULE Models Fast, Precise Heads-Up Sighting; Rugged, Reliable Accurate Protects The Lenses Ultra-Robust Design Handles Magnum-Power Recoil & Versatile - Always Ready Close-Quarters From Weather & Damage; FASTFIRE II - Provides fast, both-eyes- Parallax-free, non-magnifying Sight Plus Bullet Flips Open Instantly open sighting on handguns, rifles, red dot sight is ready at all times, Drop Compensation Flexible rubber body with spring- and shotguns. Stainless steel and with no switches or levers to fumble To 500 Yards loaded, ABS plastic covers help seal aluminum housing handles the recoil with. Simply install the supplied Multi-purpose tac- out dirt, dust and moisture to keep of magnum shotgun loads; installed battery, turn the PRO on, and forget tical prism scope with the lens surfaces of your EOTech accessories weight under 2 oz. allows mounting about it – for up to 3 years! 2 MOA 3x magnification provides precise targeting from zero to 500 holographic sight clean, scratch-free, and ready for use in all on semi-auto pistol slides. Gives a center-dot, with 6 daylight and 4 yards. Fully coated optics minimize glare, and Ballistic/CQ™ shooting conditions. Tabs on the right and left sides of the cov- & panoramic field of view and unlimited night vision brightness settings, illuminated reticle enhances target acquisition in low-light con- ers allow a fast, ambidextrous flip-open action with thumb or eye relief for an unobstructed view of enables accurate target engage- ditions. Bracketed cross hairs subtend 18" at 100 yards, with finger pressure. Front cover opens to near horizontal position Shown with Picatinny/ the area around the target. A high- ment under a broad variety of conditions. Includes a detachable Weaver Mount additional dots to provide immediate elevation adjustment from to help block rain or sunlight. Rear cover folds back on top of intensity LED projects a 4 MOA red spacer that allows co-witnessing with the standard iron sights 100 to 500 yards. Control knob provides five reticle brightness the EOTech’s protective hood to ensure an unobstructed view sighting dot, while a light sensor and integrated control circuitry on AR-15/M16/M4 weapons. Or remove the spacer to install the through the sight. Body section installs under the EOTech pro- optics levels in red or green; reticle appears black in the off position. adjust the dot’s brightness. Coated lens resists scratches and PRO on shotguns or submachine guns. Integrated “rail-grabber” Removable accessory rails on the top and sides allow mounting tective hood, so it’s not even visible. Noise-absorbing neoprene scuffs and is parallax-free to 50 yards. 1.07x magnification aids mount with knurled, oversized knob aids in quick attach/detach of open sights, red dot sights, lasers, or other accessories. Fully- pads dampen the sound of the rear lens cover contacting the hood in acquiring long-range targets, without compromising close-in on Picatinny rails. Compatible with all generations of night vi- machined aluminum body is hardcoat anodized for extra sur- during covert operations. ab effectiveness. Set the point-of-impact with two flush-mounted sion devices; may also be used with Aimpoint 3x Magnifier and face strength, with a non-reflective, matte black finish. Integral SPECS: Rubber body, ABS plastic covers, neoprene pads, matte screws that provide 3° (190" at 100 yards) windage and eleva- Concealed Engagement Unit. Flip-up lens caps included. mount clamps securely to MIL-STD 1913 Picatinny rail, and also black. 1 oz. (28.4g) weight. Includes Torx wrenches for installation. 3 7 7 tion adjustments using the included scale disc and adjustment SPECS: Hard-anodized aluminum, black. 5¼" (13.3cm) OAL. 3" (7.6cm) allows easy installation on AR-15/M16 carry-handle receivers. 511/512/551/552 - 2 ⁄8" (5.9cm) long, 1 ⁄8" (4.8cm) wide, 1 ⁄16" tool. Control switch on the left side resists accidental activation. high, including spacer. 13oz. (368.g) wt. 1x magnification. 30mm tube Flip-up lens cap/sunshades included. (3.6cm) high. Fits EOTech models 511, 512, 551, and 552. XPS2/3 - Powered by one 3-volt CR-2032 lithium battery, included; up to 3 dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Wa- SPECS: Aluminum, hardcoat anodized, matte black. 40mm tube, 2 ⁄8" long, 2¼" (5.7cm) wide, 1½" (3.8cm) high. 1 oz. (28.4g) weight. 5-year battery life when used in Battery Saver mode. Gasket bot- terproof to 150’ (45m) depth. One DL1/3N lithium battery, included. 32mm objective lens, 3x magnification. 5.3" (13.4cm) long, 14.2 Fits EOTech models XPS2 and XPS3 only. tom plate seals unit 100% against water. Available with a mount #100-009-902AK Patrol Rifle Optic 7A00UAV. . . $ 409.99 oz. (403g) wt. 2½" (6.3mm) eye relief, ¼" MOA click adjustment, 32 #336-000-007AK 511/512/551/552 Lens Cover, that fits MIL-STD 1913 Picatinny and Weaver-style rails. For ft.(80m) field of view at 100 yds. Requires one (1) CR-2032 lithium 6C36H23...... $ 40.00 other installations, sight and mounts are available separately. BUSHNELL TROPHY battery, included. Battery life: 200 hours (high), 500 hours (low). #336-000-038AK XPS2/3 Lens Cover 6C39A86. . . . 42.50 SPECS: Sight - Steel, aluminum, optic-grade glass. 1¾" (4.5cm) #118-000-021AK AR-332 Prism Sight 8A00YTP. . $ 349.00 long, 1" (2.5cm) wide, 1" high. Includes snap-on cover, CR-2032 lithium battery, windage/elevation scale disc and adjustment tool. TRS-25 RED DOT SIGHT ELCAN AR-15/M16/M4 Mounts - Aluminum, matte black. Mounting screws included. Single-Focus Sighting Plane BURRIS AR-15/M16 SPECTEROS4x #118-000-020AK FastFire II, only 8A00HDZ . . . . $ 199.00 Gets You On Target Fast #118-000-019AK FastFire II, w/Picatinny/Weaver Mount, AR-TRIPLER™ MAGNIFIER 8A209H99...... 229.99 Non-magnifying sight with all the ben- COMBAT OPTICAL SIGHTS #118-000-013AK 1911 Std FastFire Mnt 8A39H28. . .49.99 efits of fast, accurate, battery-powered Adds 3x Magnification High-Performance, #118-000-014AK 1911 Novak FastFire Mnt 8A39H28. 49.99 red dot sighting, plus the durability of To A 1x Optic Super-Accurate Optic Calibrated #118-000-015AK 1911 Bo-Mar/Kimber FastFire Mount, waterproof, fogproof, shockproof Bushnell-quality optics. Per- For Longer Range Shots For 5.56 NATO Ammunition 8A46H67...... 49.99 fect for rifle, shotgun, and handgun use. Bright red 3 MOA dot provides precise, both-eyes-open shooting to get you on target When installed behind a non- Fixed 4-power scopes are specifi- #118-000-011AK Glock FastFire Mount 8A39H28. . .49.99 magnifying red-dot sight, this #118-000-012AK Sprgfld XD FastFire Mnt 8A37H97. 44.99 fast without sacrificing accuracy. Eleven position rheostat al- cally engineered for 5.56 NATO am- lows the shooter to match the brightness of the dot to specific add-on optic provides a true 3x munition to provide shooters with PICATINNY PROTECTOR MOUNT - Light- shooting conditions. Easy-to-grasp control knob to adjust bright- system for accurately engag- pin-point accuracy from 20 to 800 ing targets at longer ranges. weight mount with raised “wings” protects ness. Amber-Bright™ multi-coated optics provide a clear, crisp meters/yards. Rugged, aluminum your FastFire sight from damage. Mount- sight picture; unlimited eye relief helps you get on target fast. Waterproof, fogproof and shockproof, the AR-Tripler has fully housing and an integral base that ing platform is contoured for a perfect fit Aluminum body has a built-in Picatinny/Weaver-style mount. multicoated lenses to deliver excellent brightness and clarity. attaches/detaches quickly to MIL- Windage and elevation knobs allow you to adjust the magnifier and attaches with two Allen head screws. SPECS: Aluminum body, anodized, black finish. 25mm (1") dia. ob- STD 1913 Picatinny rails with a on the red center-dot of the sight for maximum effectiveness. Extra-large, steel cross-bolt and clamping jective lens. 2½" (6.4cm) long. 4 oz. (113g) wt. Up to 3,000 hours flick of the easy-to-operate throw When magnification isn’t needed, the quick-attach/detach AR- bar provide a tight, positive lock on Pica- of operation on a single battery. Lens covers and CR-2032 battery levers. Knurled, side-mounted dial QD Pivot Ring Picatinny mount lets you quickly and securely flip tinny and Weaver-style rails. included. toggles 5 reticle brightness settings SPECS: 6061 T6 aluminum, black, matte, anodized finish. 2" (10cm) the magnifier aside for CQB or other close-range applications. for your choice of center point illu- 3 #593-000-054AK TRS-25 1x25mm Red Dot Sight, long, 1 ⁄8" (3.5cm) wide, 1¼" (3.2cm) high. 1.3 oz. (36.8g) weight. 9E00CHD...... $ 93.99 Designed for use with AR-style rifles firing 5.56/.223 ammuni- mination for close-range targeting, #118-000-016AK Picatinny Protector Mount, tion, the AR-QD can be purchased with the AR-Tripler or alone or complete reticle illumination al- 8A74H95...... $ 99.95 for use with other 30mm tube magnifiers. lowing you to use the holdover marks in any light conditions. SPECS: AR-Tripler Magnifier – Aluminum housing, hardcoat an- FASTFIRE III - Same de- Glass-etched reticle is always visible and is night-vision compat- 118-000-055AK 8 MOA FastFire III, Sight Only, odized, matte black. 4" (10.2cm) OAL. 30mm tube. 6.4 oz. (199g) wt. pendable red dot sight as 5 ible. A1 reticle has a “Chevron” center aiming point and holdover 1 ⁄8" (4.1cm) above rail at center line (when using AR-QD Pivot Ring). the FastFire II with en- 8A00YTP...... 239.00 hash marks at 400, 500, 600, 700, and 800 meters. C1 reticle is 118-000-053AK 8 MOA FastFire III, w/ Picatinny Mount, Eye relief 2.5". FOV 44’ @ 100 yds. Waterproof. Works with many a standard, crosshair-style reticle with a red highlighted center hanced features, includ- common red-dot sights. Not recommended for use with magnified ing a tactile pushbutton 8A00VBX ...... 249.00 aiming reference, a target-size based rangefinder, and holdover Shown With optics. AR-QD Pivot Ring – Aluminum housing, hardcoat anodized, hash marks at 300, 400, 500, 600, 700, and 800 meters. power switch with three SHOTGUN SPEEDBEAD™ - Combines the prov- Picatinny Mount matte black. Fits 30 mm tubes. 1" (2.5cm) high. Not recommended SPECS: Aluminum, hardcoat anodized, matte black. 6" OAL, 2.6" controllable levels of en Burris FastFire II red dot reflex sight with a for use as mount for primary optic. wide, 2.5" high. 18.2 oz. (515g) wt. 2¾" (7cm) eye relief. 32mm brightness, plus an auto- steel mounting plate that installs easily between #118-000-046AK AR-Tripler Magnifier w/AR-QD Mount, objective lens, 4x magnification. 120 MOA adjustment range, ½ matic brightness setting. Battery access from the top lets you your shotgun’s stock and receiver to center the 8A311Y39...... $ 329.99 MOA click value. Uses 1 DL 1/3N battery, included. Battery life: change the battery without removing the sight from the gun. optic directly in line with the rib. Provides ap- #118-000-043AK AR-Tripler Magnifier, Only, 600-3,000 hrs, depending on brightness setting. Waterproof to 66 Low battery indicator and automatic power shutoff after 8 hours proximately 4" of eye relief. In case of battery 8A228H63...... 249.00 ft. AN/PVS-22 night-vision compatible. help keep you from running out of power at the wrong time. failure, simply look through the optic and use #118-000-045AK AR-QD Pivot Ring, Only, #008-000-007AK SpecterOS4x, A1 Reticle, Windage and elevation adjustments can be made quickly with your front bead. 8A82Y76...... 89.99 8K00AYT...... $ 1,447.00 a coin - no special tool needed - with a 3° (190" at 100 yards) ad- SPECS: Steel, aluminum, optic-grade glass, plas- #008-000-006AK SpecterOS4x, C1 Reticle, justment range. Available with 3 or 8 MOA dot, with or without tic spacers, steel setscrews. 1¾" (4.5cm) long, 1" 8K00CHD...... 1,447.00 quick-attach/detach Picatinny mount (also fits Weaver rails). (2.5cm) wide, 1" high. Includes snap-on cover, CR- STARRETT SPECS: Aluminum, stainless steel, and bronze, matte black finish. 2032 lithium battery, windage/elevation scale disc, 1.9" (48.2mm) long x 1" (25.4mm) wide x 1" high. .9 oz. (25 g) wt. adjustment tool and instructions. CR-2032 LITHIUM BATTERY Runs on one CR-1632 Lithium battery. Includes battery, protective #118-000-024AK SpeedBead, Rem 870 8A00YTP. . . $ 249.99 Replacement Battery For A cover, mounting screws, wrench, and instructions. FastFire III is From sandwiches to gun gear #118-000-025AK SpeedBead, Rem 1100/11-87, Wide Variety Of Powered Devices not compatible with the AR-F3 FastFire Mount or the Picatinny 8A00VBX ...... 249.99 and supplies - discover the Protector Mount. #118-000-022AK SpeedBead, Benelli SBE II, Replacement battery for most Starrett digital cali- 118-000-054AK 3 MOA FastFire III, Sight Only, 8A00VBX ...... 249.99 pers, many compact red dot sights, and a variety of Brownells story at 8A00HDZ...... $ 239.00 #118-000-023AK SpeedBead, Benelli M2 8A00HDZ. .249.99 other battery-powered electronics. www.brownells.com/aboutus 118-000-052AK 3 MOA FastFire III, w/Picatinny Mount, #118-000-027AK SpeedBead, Beretta Xtrema 2, SPECS: CR-2032, 3 volt lithium cell. Sold in 2 pak. 8A00YTP...... 249.00 8A00YTP...... 249.99 #827-000-006AK CR-2032 Battery, 2 pak 7B00PUA. . $ 8.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 266 SINCE 1939 Office/Tech: 641-623-5401 Models EOTECH YANKEE HILL optics HOLOGRAPHIC SIGHT #100-005-846AK 511/512/551/552 Protective Hood, Black, a night vision brightness range of 1,280:1 with NV switch en- EOTECH 9K24Z00...... $ 32.00 gaged. Extreme-XPS (EXPS) models are both Gen I-III+ night- Provides Extremely Fast, Heads Up #100-005-845AK 553 Protective Hood, Black 9K13Z35.18.00 vision compatible and feature a battery compartment positioned REPLACEMENT SCREW Target Engagement For Close #100-005-847AK Hood Mounting Screw Kit 9K05Z71. 6.99 above the base so the sight can be mounted closer to the Delta

Oversize Head Makes Attaching & Quarters & Long Range Shooting #100-005-848AK 511/512/551/552 Mounting Hardware, ring. A slightly higher base positions the viewing window to co- witness with iron sights. Quick-release rail mounting system Your HoloSight Easier

9K16Z00...... 22.00 accessories Weatherproof, shockproof, night vision #100-005-843AK 502/511/551 Battery Compartment, has a release lever that fits flush along the side of the sight, so Fully machined, heat-treated thumbscrew with oversize, slot- compatible sight provides competitive, 9K13Z35...... 18.00 the EXPS is no bulkier than the XPS. A locking tab prevents ted head protrudes farther out from the side of your EOTech military and law enforcement shooters #100-005-842AK Pre-2009 512/552 Battery Compartment, accidental lever release. Control buttons on the left side of the holographic sight. Provides increased surface area for more posi- a versatile, all-weather sighting system. Holographic, variable- 9K15Z00...... 20.00 housing. EXPS3-0 has a 65 MOA circle/1 MOA center dot reticle. tive sight retention than the small-headed factory screw. Makes intensity reticle is visible in any light. As long as the operator 100-008-121AK Post-2009 512/552 Battery Compartment, EXPS3-2 reticle has 65 MOA circle with two, vertically aligned attaching and removing your sight much easier to do, even when can see through any portion of the window, the entire reticle 9K11X43...... 13.99 1 MOA dots, the top dot for targeting out to 200 yards, the lower wearing gloves. ab is visible on target. All models (except 552.XR308) feature a #100-005-844AK 553 Battery Compartment, Tan, dot for ranges out to 500 yards. 1 dot-within-a-circle reticle that presents a see-through pattern 9K13Z35...... 18.00 SPECS: Aluminum housing, hardcoat anodized, matte black. SPECS: Steel, matte blue. 2 ⁄8"(5.3cm) long. Head- .562"(14.2mm) for lightening-quick target acquisition. Heads-up display elimi- 100-008-122AK Pre-2009 512/552 Batt. Comp. Repair Kit, Windage and elevation adjustment range +/-40 MOA in ½ MOA diameter, 375"(9.5mm) thick. #100-002-898AK EOTech Repl. Screw 9A06T99. . . $ 8.80 nates blind spots and tunnel vision. Gives true, both eyes open 9K04X00...... 4.99 clicks (½" at 100 yards). Brightness adjustment range: 146,000:1, shooting for instant target identification. Electronics are encap- 100-008-123AK XPS/EXPS Battery Cap w/Cable Tether, brightest to lowest. 20 brightness settings; night-vision compat- sulated in a shock absorbing resin compound and sealed against 9K20X69...... 22.00 ible models have additional 10 NV settings. Brightness range in NV EGW dirt and water. Shatterproof lens has an anti-reflective coating. mode: 1,280:1. XPS - 3.675" (9.3cm) long x 2.125" (5.4cm) wide x Light signature is not visible from the front. All user controls MODELS 516, 517 & 556 – Flush- 2.375" (6cm) high. 8.8 oz. (250g) weight. EXPS - 3.675" long x 2.25" DOCTER RED DOT SIGHT MOUNT are flush with the housing, no protruding knobs or mounting mounted control buttons positioned (5.7cm) wide x 2.75" (7cm) high. 11.2 oz. (317g) weight. Replaces Factory Rear Sight For Easy rings to snag or block vision. Integral mount fits Weaver-style on the left side of the unit ensure easy, #100-004-277AK XPS2-0 Sight 9K00PUA. . . . . $ 509.99 Installation Of A Docter-Style Red Dot and Picatinny bases. Aluminum “roll bar” hood protects display. fast access when back-up iron sight 100-010-863AK XPS2-Z Zombie Stopper Sight, ® Model 553 incorporates ARMS dual quick-release throw levers or EOTech Magnifier is installed. In- 9K00TPU...... 535.00 Adapter base fits factory or aftermarket for instant on/off capabilities. Zero is repeatable to 1 MOA after tegral mount with knurled cross-bolt #100-004-498AK XPS3-0 Sight 9K00DZA...... 579.99 “iron” rear sight dovetails for easy mount- re-mounting. Sight body sets 7mm (.275") higher to provide op- locks securely MIL-STD 1913 Picatinny and Weaver-style rails; #100-005-734AK EXPS3-0 Sight 9K00HDZ . . . . . 649.00 ing of a Docter or similar red dot sight with erator with a consistent cheek weld with all other standardized zero is repeatable to 1 MOA after removing and re-mounting. #100-005-735AK EXPS3-2 Sight 9K00YTP...... 649.00 a hole pattern that fits a Docter base. No modifications to slide optics. Model 552, 552.XR308, and 553 are night vision compat- Front one-third of the base underside is elevated .275" (7mm) required. Adjustable hex-head screw ensures a secure lock in G33.STS MAGNIFIER – Third-genera- ible with a night vision brightness range of 1,000:1 with NV for clearance over delta ring and standard military-style plastic the dovetail; includes two hex-head cap screws to secure sight tion add-on optic system helps greatly switch engaged. Model 552.XR308 has a ballistic drop compen- handguard. Submersible to 33 ft. depth. Models 516 and 556 oc- to base. Models available to fit Novak, Bo-Mar, or Glock factory increase the effective reach of any sated reticle for .308 caliber with hash marks calibrated for 600, cupy only 3¼" of rail space, leaving adequate room for a backup rear sight dovetails. ab EOTECH Holographic Weapon Sight 900, and 1200 meters. Model 512 has no provisions for night iron sight. Both have an easy-to-acquire tactical reticle with a 1 SPECS: 7075 T6 aluminum, hardcoat anodized, black. Will not ac- (HWS) without compromising close- vision equipment. Model 512 w/Upgrade Kit includes the sight MOA dot inside a 65 MOA ring and provide up to 1,100 hours of cept J-Point/Optima red dot sights. range ability. 3x Magnifier mounts di- and the GG&G Upgrade Kit described below. GG&G EOTech continuous operation on two (2) 3 volt CR123A lithium batteries, #296-000-137AK Novak Sight Mount 6B40X43 . . . $ 49.95 rectly behind the HWS, requires no ad- Upgrade Kit includes a GG&G flip-up dual lens cover set and the included. Model 556 is also compatible with Gen I-III+ night #296-000-135AK Bo-Mar Sight Mount 6B40X43. . . .49.95 justments to the HWS itself and leaves GG&G Accucam lever-operated quick-detach Picatinny mount. vision systems; 1000:1 night vision brightness range with NV #296-000-136AK Glock Sight Mount 6B40X43. . . . 49.95 the point of aim unchanged. Finger-ad- Fits EOTech Models 511, 512, 551, and 552. ab switch engaged. Full-size Model 517 is powered by two common justable windage and elevation knobs SPECS: Polycarbonate body, aluminum hood, matte, black. Lens - 1.5 volt AA batteries for 600 hours of continuous operation with 3 make sight corrections easy. Sealed, fogproof, submersible to 33 ⁄16" thick, 3-layer, shatterproof laminate glass. Reticle size: 1 MOA alkaline batteries or 1,000 hours with lithium cells. Reticle is a INSIGHT TECHNOLOGY 5 ft., and fully adjustable for windage and elevation. Switch-To- dot and 65 MOA ring. 512, 552 & 552.XR308 - 5 ⁄16" (13.5cm) long, 65 MOA circle with a 1 MOA center aiming dot. Requires 3¾" 15 3 Side (STS) mount lets you instantly transition between magni- 1 ⁄16" wide, 2 ⁄8" high. 11.5 oz. (326 g) wt. Uses two AA batteries, of rail space. Buttons positioned on left side of housing for easy MRDS RED DOT SIGHT 15 15 fied and unmagnified viewing with a slap of your hand. Mount included. 553 - 4 ⁄16" (12.4cm) long, 1 ⁄16" wide, 2¾" (7.1cm) high, access when G23 Magnifier is mounted behind sight. Ruggedized For Tactical Operations; can be installed to flip to either left or right side. Quick-detach 12.2 oz. (345g) wt. Uses two CR-123A lithium batteries, included. SPECS: Polycarbonate body, aluminum hood, matte, black. Lens 3.5 MOA Dot With Manual & 3 1 lever enables easy mount/dismount on any Picatinny rail, and #100-001-738AK 512 Holographic Sight 9K00PUA. $ 429.99 - ⁄16" thick, 3-layer, shatterproof laminate glass. 516/556 - 5 ⁄8" 1 included riser allows optic to align with 7mm raised sights. Auto Intensity Settings 100-006-961AK 512 w/Upgrade Kit 8K507A70 . . . 507.99 (13cm) long, 2 ⁄8" (5.4cm) wide, 2¾" (7cm) high. 11.9 oz. (337g) 1 SPECS: Aluminum, hardcoat anodized, matte black. 3.9" (9.9cm) #100-000-909AK 552 Holographic Sight 9K00UAV. .529.99 weight. 517 - 5¾" (14.6cm) long, 2 ⁄8" wide, 2¾" high. 12.3 oz. (349g) Lightweight reflex sight combines long. 11.9 oz. (337g) wt. Actual magnification 3.25x. Eye relief 2.2" #100-003-196AK 552.XR308 Holographic Sight, wt. 516/517/556 - Reticle: 1 MOA dot inside 65 MOA ring. lightning-fast target acquisition with (5.5cm). Field of view 7.3°. Operating temperature range -40° to 9K00YTP...... 599.00 #100-003-473AK 516 Holographic Sight 9K00TPU. $ 499.99 military-grade durability specifica- #100-002-871AK 553 Holographic Sight 9K00DZA. .699.00 160° F. tions that meet or exceed those used by special operations #100-004-280AK 517 Holographic Sight 9K00BXC. .469.99 100-010-865AK XG33.STS Magnifier 9K00VBX. . $ 549.99 100-006-974AK GG&G EOTech Upgrade Kit, #100-003-475AK 556 Holographic Sight 9K00HDZ. .599.99 personnel working in extreme combat conditions. The non- 6C116Z25...... 119.99 HHS I SIGHT/MAGNIFIER SET – Combines the EXPS3-4 sight magnifying lens is crafted from lightweight, impact resistant XPS/EXPS SERIES – The most compact XPS3-0 REPLACEMENT PARTS – Genuine factory with the G33.STS magnifier to polymer with an anti-reflective coating for a clear, crisp field of EOTech holographic weapon sight se- provide a sighting system with view. Sealed pushbutton conveniently located on the rear of the replacement parts fit perfectly and help you ries yet. Runs on a single CR-123 bat- keep your EOTech sight running like new. Alu- maximum versatility. Magni- housing lets you choose between four pre-set intensity levels for tery, yet delivers up to 600 hours of con- fier aids target acquisition at the 3.5 MOA dot, or the default Auto mode that automatically minum Protective Hoods for 511/512/551/552 tinuous operation. Overall sight length series and model 553 are available in matte longer ranges and can be quick- adjusts to ambient light conditions. The MRDS fits any mount is less than 3¾" because the battery is ly flipped to the side for clear designed for Docter® red dot sights. The sealed housing is molded black. Hood installation requires Hood mounted crossways, at the front of the the four, T-15 Torx®-head access to the non-magnifying from advanced polymers to reduce weight without sacrificing housing. Sealed, waterproof buttons EXPS3-4 alone in close-quarter strength, and is waterproof down to 66 feet for up to 2 hours. screws in the Hood Mount- let you activate the high-visibility red ing Screw Kit, available engagements. Both units fea- Extensive salt, fog, drop, vibration, and shock testing ensures reticle and precisely adjust the bright- ture quick release levers and this sight meets MIL-STD 810G standards, and will operate separately. Polymer Battery Mounting ness level for any ambient light condi- Compartments are available Hardware Battery will attach easily to any flattop AR-15/M16 rifle. EXPS3-4 sight at temperatures ranging from -104° F to 120° F. Adjustable for Compartments tions. Automatically shuts off after 8 for N-cell powered 500 series, features a ballistically compensated reticle calibrated for the windage and elevation in 1 MOA clicks. Powered by one 3-volt hours (user may reset to 4 hours) to 5.56 NATO cartridge fired from a carbine-length barrel, with CR-1632 lithium battery, included; depending on output setting, pre-2009 model 512/552 sights preserve battery life. Fully adjustable that use AA-cells, and model aiming dots for engaging targets at 0-300m, 400m, 500m, and continuous run time on one battery is up to one year. Top-loading Screw Kit for windage and elevation in ½ MOA 600m. Control buttons are located on the left side of the housing, battery compartment eliminates loss of zero by allowing bat- 553 (two CR‑123A cells). Bat- clicks. Non-magnifying, fogproof op- tery Compartment Repair so they’re easy-to-access with the magnifier in place. tery change without removing sight from mount. Comes with a tics of shatter-resistant, anti-glare SPECS: Aluminum housing, hardcoat anodized, matte black. 8.1" slip-on protective rubber cover and Insight MiniPro II compact Kits are available to repair the spring coated laminate provide exceptional or rubber grommets on battery com- XPS2-Z Zombie (20.6cm) approx. OAL with magnifier installed behind sight, 2.25" cleaning system for lens maintenance. clarity. Base requires only 2¾" of rail Stopper (5.7cm) wide, 2.75" (7cm) high. 11.2 oz. (317g) wt. EXPS3-4 runs SPECS: Optic-grade polymer lens and molded polymer housing, partment caps on pre-2009 512/552 Battery Comp. Battery Cap space; fits MIL-STD 1913 Picatinny or sights. Battery Caps with new style Repair Kit w/Tether on one CR-123A lithium battery, included. Battery life is 500-600 Black or Tan. 1.9" (4.8cm) long, 1.1" (2.9cm) wide, 1.5" (3.8cm) high. Weaver rail. O-ring sealed battery cap hrs at setting 12. Weight .85 oz. Includes rubber cover, CR-1632 lithium battery, tether available to replace lost or damaged battery caps on XPS/ keeps out moisture (submersible to 10-ft. depth). Standard XPS EXPS sights. Mounting Hardware kit contains an Allen head 100-007-265AK HHS I EOTech Sight/Magnifier Set, windage/elevation adjustment tool, mounting screws, lens clean- models have rear-mounted control buttons. XPS2-0 model fea- 9K00HDZ...... $ 1,199.99 ing pen, and instructions. Fits mounts that accept Docter red dot cross-bolt and wrench, Weaver-style slotted mount bolt, plastic tures a reticle with an easy-to-see 65 MOA circle with a 1 MOA washer, and Weaver lock bar. Fits 511, 512, 551, 552 sights only. sights (not included). aiming dot in the center. XPS2-Z Zombie Stopper has a red #100-004-749AK MRDS Red Dot Sight, Black, SPECS: Protective Hoods - Aluminum, anodized, matte black. Hood reticle with a 1 MOA aiming dot surrounded by the international 6B00XCH...... $ 489.99 Screws/Mounting Hardware Kit – hardened steel, matte black. Bat- biohazard symbol to precisely pinpoint individual zombies out Instructional video available at brownells.com #100-004-758AK MRDS Red Dot Sight, Tan, tery Compartments – Reinforced molded polymer. of the shambling horde. XPS3-0 is night-vision compatible with 9K00PUA...... 489.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 267 JP ENTERPRISES J-POINT MOUNT LEUPOLD MILLETT TRIJICON AR-15/M16 ACOG TACTICAL Mounts Sight Low DELTAPOINT® REFLEX SIGHT RED DOT SIGHTS SIGHTING SYSTEM COMBOS For Fast Alignment Ultra-Clear Sighting For Instant Red Dot Gives Fast Sight Fully Assembled ACOG/Reflex Tactical Sighting System Gives the JP J-Point, and the old Target Acquisition; Recognition; Customizes Ready To Clamp On Your Flattop Tasco Optima and Fire Point sights, Two Reticle Styles Available To Your Shooting Situation the lowest possible mount for fast eye Complete, fully assembled tactical sighting system comes alignment and sight pickup. No machining required; fits the factory Ultra-compact, lightweight reflex Waterproof, shockproof, ready to install on a flattop AR-15/M16/M4 rifle and equips you dovetail. Four locating studs lock sight to base. BM #1 fits slides cut sight features exclusive “aspher- red dot sight contrasts against shooting backgrounds in low- and to engage targets at almost any range. Each kit is built around ic” lens technology that delivers regular-light situations for fast, easy, sight pickup on your rifle, the combat-proven ACOG scope for long-range targets, and a

accessories for “melted-in” sight. LPA fits Para-Ordnance and others with LPA sight cut. S&W Revolver fits factory drilled and tapped guns. ab super-sharp, edge-to-edge clarity, handgun, or pistol. Click adjustments for windage and eleva- Trijicon RM01 RMR (Ruggedized Miniature Reflex) red dot re-

& SPECS: Aluminum, black anodized, matte finish. and a large field-of-view to aid the tion and eleven, dot-intensity settings let you adjust to varying flex sight for heads-up engagement of close-in targets. Each kit shooter in quick target acquisition. True 1x non-magnifying shooting situations. Crystal clear lens is hard coated for scratch includes the correct Picatinny mount for installing the ACOG STOCK # FITS PRICE optic enables easy two-eyes-open sighting, making the Delta- resistance and is parallax free. Includes a 2032 lithium battery on a flattop upper receiver and a minimal-profile mount that #452-000-002AK BM #1 2E32V00 $ 39.95 Point ideal for competition, hunting, or tactical applications. and weaver -style rings. secures the red dot to the top of the ACOG. ab #452-000-018AK 1911 Auto w/fixed sight 2E32V00 $ 39.95 With a durable, lightweight magnesium housing, the sight is SPECS: Aluminum, silver or black, matte finish. SP-1 – 3 minute SPECS: ACOGs – Forged 7075 T6 aluminum housing, hardcoat optics #452-000-019AK Glock all models 2E32V00 $ 39.95 engineered to withstand the recoil of nearly any rifle, pistol, or dot, 1" (2.54cm) O.D. SP-2 – 5 minute dot, 30mm (1.18") O.D. anodized, matte black finish, unless otherwise indicated. Coated, shotgun. The motion-activated reticle, available with a 3.5 MOA #601-000-036AK SP-1 Silver 1K53Y99...... $ 59.99 optic-grade glass lenses. RMR01 Reflex Sight – 7075 T6 aluminum #452-000-003AK LPA 2E32V00 $ 39.95 Dot or a 7.5 MOA Delta sighting reference, uses automatic light #601-000-037AK SP-1 Black 1K53Y99...... 59.99 housing, hardcoat anodized, matte black finish. Acrylic lens. 1¾" 1 #452-000-004AK S&W Revolver 2E40V00 $ 49.95 sensing technology to ensure the aiming point is always visible #601-000-038AK SP-2 Silver 1K53Y99...... 59.99 (4.5cm) long, 1 ⁄8" (2.8cm) wide, 1" (2.5cm) high. 1.2 oz (34g) weight. #452-000-021AK Weaver/Picatinny 2E48V00 $ 59.95 - day or night - without fumbling with buttons. DiamondCoat™ #601-000-039AK SP-2 Black 1K53Y99...... 59.99 4.0 MOA LED red dot reticle. Waterproof to 66 feet (20m). CR-2032 lens coating ensures excellent light transmission and abrasion lithium battery included. Picatinny Mounts – Aluminum, hardcoat resistance. Models are available with a Picatinny/Weaver-style anodized, with steel cross-bolts and hardware. mount only or with the Picatinny mount plus mounts for a va- R & R TARGETS SAIGA SHOTGUN For more choices of JP ENTERPRISES TA33H-RMR - Contains a 3 x 30 riety of popular semi-auto pistols, including Beretta 92/96/90- ™ MOUNTS visit brownells.com TWO/Taurus PT-99, 1911 Government Model, Glocks with 1.18" FASTFIRE MOUNT ACOG with an amber “upside down horseshoe” reticle ballis- wide slide, SIG P226, Springfield XD, CZ-75, HK USP, Kimber Easy-To-Install Base with fixed or adjustable sights, S&W M&P, and S&W Classic. tically compensated for rifles Accepts Burris FastFire & chambered in .223/5.56mm, LASER DEVICES/EOTECH SPECS: Magnesium body, matte black finish. 1.6" (4cm) OAL. 1.3" (3.3cm) tall – measured with cross-slot mount attached, height will Other Micro Red Dot Sights RM01 RMR sight with a 4 MOA LED red dot, and a rug- EOLAD-1V LASER/HOLOGRAPHIC vary depending on mount used. .6 oz (17g) wt. without a mount Lightweight, rugged mount lets you attached. 120 MOA windage/elevation adjustment range. Water- ged TA60 mount that clamps add the heads-up convenience and ac- to any Picatinny flattop rail. SIGHT SYSTEM proof. Includes one CR-2032 battery, protective cover, mounting curacy of a micro red dot sight to your Saiga shotgun. Accepts the tools, and instructions. TA33H ACOG offers a battery- Dual-Mode System Gives Choice Burris FastFire Red Dot Reflex Sight and other micro red dots free dual-illumination system #526-000-172AK DeltaPoint 3.5 MOA Dot, w/All Mounts, with the same attachment hole spacing. Drop-on replacement Of Red Dot Or Laser To Address 6B00HDZ...... $ 449.99 that combines powerful fiber for factory rear sight requires no permanent modifications to optics with Tritium for a reticle that’s visible in any light condi- Almost Any Target #526-000-176AK DeltaPoint 3.5 MOA Dot, w/Picatinny your gun. Extra-strong base ensures a zero-movement installa- Mount Only 6B00YTP ...... 399.99 tions from bright sunlight to total darkness. Advanced dual-mode sighting sys- tion, with oversize wings to protect the sight. SPECS: 14.6 oz. (414g) total weight. #526-000-170AK DeltaPoint 7.5 MOA Delta, w/All Mounts, SPECS: Aluminum, anodized, gloss black finish. 1¾" (4.4cm) long, tem gives the operator the choice of 6B00YTP...... 449.99 #892-000-061AK TA33H-RMR ACOG/RMR01 Combo, a holographic red dot sight or a powerful laser sight to address 1½" (3.8cm) wide. Includes installation screws. Requires removal 2H1673D56...... $ 1,763.75 #526-000-174AK DeltaPoint 7.5 MOA Delta, w/Picatinny of factory rear sight. almost any tactical situation. Combines the fast acquisition, Mount Only 6B00AVB ...... 399.99 heads-up versatility, and long-range capabilities of an EOTech #100-004-918AK Saiga FastFire Mount 5B70V83 . . $ 79.00 TA01NSN-RMR - Includes the Model 552 holographic sight with the precision of a powerful popular TA01NSN 4 x 32 “Spe- 635nm/5mW red laser sight in one compact, flattop-mounted MICHIGUNS cial Forces” ACOG (NSN 1240- unit. Systems may be operated independently and are separate- SPRINGER PRECISION 01-412-6608) with a range- ly adjustable for windage and elevation. Laser has two output EOTECH ADJUSTMENT DECALS finding reticle calibrated for RED DOT REFLEX SIGHT MOUNT the M4A1 carbine and clones, settings and draws power from the 552’s battery pack; two, in- Elevation & Windage Calibrated cluded 1.5 volt AA batteries give five hours of continuous laser Secure, Stable Platform For a RM01 reflex sight with 4 operation. Eye-safe low-power setting is for force-on-force train- Decals For Fast Adjustments MOA LED red dot, and a TA51 Red Dot Sights Picatinny mount. Self-illumi- ing and CQB; high-power setting for daylight and long-distance Calibrated decals are placed on the nating Tritium ACOG reticle target illumination. Pressure switch on housing activates laser; outside of the EOTech protective hous- Low-profile aluminum mount appears black in daylight, and a separate plug-in remote switch is provided for use on hand- ing, around the elevation and windage uses the factory rear sight dove- amber in low-light conditions. guard or vertical grip. Both switches allow easy tactile selection knobs to allow fast, precise sight ad- tail to mount a Burris FastFire or SPECS: 16.7 oz. (474g) total wt. of momentary or continuous operation. Master lock-out switch justments on distant targets. Large, Docter red dot sight on the slide of #892-000-062AK TA01NSN-RMR ACOG/RMR01 Combo, prevents accidental operation and allows selection of Low or easy to see arrows avoid confusion by pointing in the direction your Springfield XD/XDM pistol. 2H1661D05...... $ 1,751.00 High setting. Removable safety screw prevents accidental High of turn to change elevation and windage. Transparent with tan Easy-to-install, no gunsmithing required. Simply insert into the mode activation. LED on rear of housing indicates when laser is colored lettering and markings that are easy to see. Each cali- dovetail and tighten the two steel Allen head screws, front and TA31-ECOS - Enhanced Combat Optical Sight system originally on and flashes to indicate low battery. Materials and construc- brated “tic” mark is the equivalent of ½" of bullet point-of-impact rear, for a secure hold. Polymer-tipped Allen won’t mar the slide developed for the U.S. military tion meet MIL-STD-810F for adverse environmental conditions. at 100 yards. Constructed of waterproof, high-strength vinyl, finish and help create a stable, balanced sight platform. Mount Special Forces (NSN 1240-01- Aluminum housing is built to withstand shock, vibration, and with an adhesive backing that holds tight. ab is contoured for a perfect fit to the sight body, also using two Al- 540-1186) includes a TA31 4 x temperature extremes of the harshest law enforcement and mili- SPECS: Vinyl decal. Calibration - ½" @ 100 yards. len head screws. One piece machined aluminum construction, 32 ACOG, RM01 reflex sight tary operations. Aluminum “roll bar” hood protects display of ho- #100-003-668AK Adjustment Decals 3Z06Y95 . . . . $ 9.99 hardcoat anodized for additional strength and long service life. with a red, 4 MOA LED reticle, lographic sight from impact; captive rubber plug protects laser SPECS: Aluminum base, hardcoat anodized, matte black. Steel 13 and an A.R.M.S. #19 quick-de- lens when not in use. Electronics are sealed against dirt and are mounting screws. 1 ⁄16" (4.6cm) long, 1" (2.54cm) wide, .14" tach Picatinny mount. ACOG waterproof to a depth of 33 feet (10m). Flush-mounted, rubber- MEPROLIGHT (3.6mm) high. Includes Allen head wrenches. Fits Burris FastFire has a bright red, dual-illumi- sealed, all-weather push-button switches are built to withstand MEPRO 21 REFLEX SIGHTS and Docter red dot reflex sights. Available for Springfield XD/XDM. nated (fiber optic and Tritium) thousands of on/off cycles. Integral mount locks securely to Pica- Does not fit pistols with 5.25" barrels and factory adjustable sights. Bullet Drop Compensated tinny and Weaver-style rail. 552 sight is night vision compatible Glowing Reticle Works #100-005-255AK XD/XDM Reflex Sight Mount, (BDC) reticle for precise aim- with a brightness range of 1,000:1 with NV switch engaged. ba In All Light Conditions 1B47H14...... 54.99 ing of M16A4/M4 rifles out to SPECS: Housing/Hood – 6061 T6 aluminum, anodized, matte black. 1,000 meters. A set of off-axis 7 Polycarbonate battery compartment. 5½" (14cm) long, 2 ⁄8" (7.3cm) Light-gathering, fiber optics backup “iron” sights on the ACOG provide a third sighting option 3 3 wide, 2 ⁄8" (6cm) high. 15.8 oz. (448g) weight. Lens - ⁄16" thick, and a tritium insert provide a that can be mounted on the left or right side of the ACOG body. 3-layer, shatterproof laminate glass. Reticle size: 1 MOA dot and crisp reticle in bright daylight times more light-gathering capabilities than the discontinued A.R.M.S. mount locks down to the receiver rail simply by closing or low light that’s easy to see for 65 MOA ring. Laser – Visible Class IIIa pointer, 5mW power output, Mepro 21-I Mepro 21-C. Available in your choice of either a 5.5 MOA dot or the quick-release levers; open the levers, remove the mount, and 635nm wavelength. 8mm beam diameter at 25m. Maximum laser quick target acquisition. No bat- a 12 MOA triangle. Dual-lever, quick-release mounting system reinstall any time without loss of either sight’s zero. ACOG and range approximately 33 yards (30m) in daylight, 492 yards (450m) teries to fail at the wrong time, provides accurate return-to-zero on Picatinny rails. mount have a desert-ready, non-reflective Dark Earth Brown 1 1 in low light. Uses two AA 1.5 volt alkaline, lithium, or rechargeable no switches to break, always on and ready to use. 30mm lens SPECS: Alloyed casting, matte black. 4 ⁄2" (11.4cm) long, 1 ⁄2" finish; RMR sight is black. batteries. gives an excellent field of view and has a multi-layered coating to (4.2cm) wide. 13 oz. (368 g) weight. SPECS: 15.6 oz. (442g) total weight. #100-003-514AK EOLAD-1V Holographic/Laser Sight, enhance light transmission. Mepro 21-I is ultra bright, with fiber #387-000-033AK Mepro 21-I 5.5 QR 7H639X99. . . $ 669.99 #892-000-066AK TA31-ECOS ACOG/RM01 Combo, 9A1281Y33...... $ 1,299.99 optics both above the sight and below the lens, giving it three #387-000-035AK Mepro 21-I 12 QR 7H649X99 . . . .699.99 2H1702D75...... $ 1,795.20 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 268 SINCE 1939 Office/Tech: 641-623-5401 TRIJICON® AR-15/M16 ACOG SCOPES TRIJICON® ACOG REFLEX SIGHT optics ® ® Advanced Combat Optical Gunsight TA47 2.0x20 - Lightweight, Com- on carry-handle rifles. Comes with Tenebraex Killflash shield Bright, Glowing, Models pact ACOG, with the exclusive to stop reflections from the front lens giving away your position, Ultra strong, Bindon Aiming Concept (BAC) plus slip-on Scopecote for protection during storage and trans- Aiming Dot In All Conditions, lightweight, forged for quick, both eyes open, aim- port, Lenspen, and adjuster cap lanyards. Without Batteries

aluminum­ housing ing. Mounts on the AR-15 carry SPECS: Forged 7075 T6 aluminum housing, matte black anodized; RX01/RX34 REFLEX SIGHT - & 7 7 and the compact design make handle without modifications; al- coated lenses. Approximately 5 ⁄8" (14.9cm) long, 6 ⁄8" (17.5cm) with Uses ambient light reflected this the stron­gest, most tech- lows use of standard issue sights. Killflash installed.. 15.9 oz. (451 g) weight. 4x magnification, 32mm through a fiber optic system, accessories nically advanced, combat gun Dual illumination; fiber optic rod objective lens. Adjustable for windage and elevation. Includes Kill- combined with glow-in-the- sight available. Tremendous light transmission and unbeliev­ with glowing amber tritium illuminates the aiming Triangle Dot FLASH, Scopecoat, Lenspen, and manual. dark Tritium, to create an easy-to-see amber-colored aiming dot able optical clarity ­rivals many high-quality hunting scopes. reticle in bright daylight and low light. #892-000-039AK TA31RCO-M4CP 4x32 Red Chevron with excellent contrast in all light conditions. No batteries to Mounts on the AR-15/M16 or AR-10/SR25 carry handle without SPECS: Forged 7070-T6 aluminum housing, black, anodized, coat- ACOG 2H00TPU ...... $ 1,398.25 weaken or wear out, no switches to turn on and off. RX01 has modifications. TA01 4x32 - The exclusive Trijicon, self-luminous ed lenses. 5.3" (13.4cm) long, 5.8 oz.(164 g) wt. 2.0X magnification, a large 6.5 MOA dot and 24mm diameter objective; RX34 has reticle has a built-in range-finding feature that’s ballistically 20mm objective lens. Adjustable for windage and elevation. TA31RCO M150CP-G 4x32 – Selected a 4.5 MOA dot and 42mm diameter objective. Combat ­tested, matched to the 5.56 X 45 NATO cartridge and clearly shows #892-803-220AK 2.0x20 Tri. ACOG 2H899T33. . . $ 946.99 by the U.S. Army as their Rifle Com- all-machined, aluminum housing is rugged enough to protect “center-of-mass” aiming points for ranges up to 800 yds. Easy- bat Optic (RCO), this version of the TA33 3x30 - Lightweight, compact the optics in the toughest conditions without failure. Separate to-see reticle glows red in low-light conditions. Sight tunnel in TA31 has a green chevron (upside mounts allow one Reflex Sight to be used in several applications. mount allows use of standard issue sights. TA01B 4x32 - Fea- ACOG combines ample 3x magni- down “V”) reticle using Trijicon’s fiber fication with Bindon Aiming Con- No-gunsmithing, clamp-on mounts return to zero after installa- tures the Trijicon, self-luminous reticle calibrated for 7.62mm optic/Tritium dual-illumination sys- tion and removal. ab NATO ammunition. TA51 Bracket converts standard ACOG for cept (BAC) for quick, instinctive, tem. Bullet drop compensated (BDC) both-eyes-open aiming—perfect SPECS: RX01 Reflex Sight - Aluminum housing, gray, hard-anod- easy mounting on flat top receivers and Weaver-style rails. ab reticle is calibrated for 5.56mm NATO 1 ized ­finish, 4 ⁄4" (10.7cm) long, 4.2 oz. (119 g) wt. 24mm objective for a patrol rifle or military car- ammunition. Windage and elevation SPECS: 7070-T6 alum. housing, black, anodized. 5.8" (14.7cm) bine. Battery-free, dual illumina- diameter. 6.5 MOA dot. RX34 Reflex Sight - Aluminum housing, adjustment without tools. Comes with 7 long, 9.9 oz. (280 g) wt. 4X magnification, 32mm ­objective lens. gray, hard-anodized finish, 4 ⁄8" (12.4cm) long. 8.2 oz. (232g) wt. tion system uses a fiber optic rod a TA51 mount for installing on flattop #892-800-432AK TA01 4x32 2H961T88 ...... $ 1,013.20 and glowing tritium lamp to illu- 42mm diameter objective, 4.5 MOA dot. Mounts - Aluminum, #892-800-433AK TA01B 4x32 2H961T88...... 1,013.20 upper receivers; base may be removed to allow installation on A2 black, anodized finish. RX10 fits AR-15/M16 carry handle. RX11 minate the reticle in bright daylight and low light. Available style carry handle rifles with included mounting screw. #892-810-051AK TA51 Bracket 2H62T55...... 65.45 with two reticle styles. Amber Chevron reticle resembles an up- fits Weaver-style rails, dual locking screws. RX14 fits Picatinny flat- SPECS: Forged 7075 T6 aluminum housing, hardcoat anodized, side down “V” and provides the benefits of a triangle reticle while top AR‑15/M16 receivers, dual locking thumbscrew. TA01NSN 4x32 SPECIAL FORCES - matte black; coated lenses. Approximately. 6.5" (16.5cm) OAL with covering less of the target. Also available with Green Horseshoe #892-110-001AK RX01 Reflex Sight 2H411T44. . . $ 433.50 Includes integral peep rear with KillFLASH installed. 14.8 oz. (420g) wt. 4x magnification, 32mm reticle with a single center dot. Clamps securely to a flattop re- #892-000-068AK RX34 Reflex Sight 2H494D84 . . $ 521.05 tritium dot front sight for fast, objective lens. Comes with flip-up lens covers, KillFLASH shield to ceiver with the integral base. Available in two models, with a #892-110-010AK RX10 Reflex Mount 2H132T05 . . .138.55 close range sighting; TA51 mount- eliminate front lens reflections, MOLLE-compatible nylon carrying choice of a bullet drop compensated (BDC) reticle specifically #892-110-011AK RX11 Reflex Mount 2H74T49 . . . .79.99 ing bracket easily mounts the case, Lenspen, and manual. calibrated to the trajectory of the .223 or .308 cartridge. #892-110-014AK RX14 Reflex Mount 2H00TPU. . . 113.05 ACOG Special Forces on flat top 892-000-075AK TA31RCO M150CP-G 4x32 Green receivers; Includes “bikini”-style SPECS: Forged 7075-T6 aluminum housing, matte black anodized; RX30 REFLEX SIGHT & FLATTOP MOUNT – 1 Chevron ACOG 2H1369D15. . .$ 1,443.30 scope covers and yellow center, coated lenses. 6 ⁄8" (15.6cm) long. 11.8 oz. (334g) total weight. 3x Same non-magnifying, dual-illumination range finding reticle to match magnification, 30mm objective lens. Adjustable for windage and TA648 6x48 - Designed to fulfill system and 6.5 MOA amber dot as RX01, M4A1 Carbine NSN 1240-01-412- elevation. TA33-8 - Amber chevron BDC reticle calibrated for .223 the requirements of military and with larger 42mm objective for maximum 6608. AR-15/M16. TA33G-H Green inverted horseshoe BDC reticle for law enforcement precision shooters light-gathering capability and fast target SPECS: 7070-T6 alum. housing, black, anodized. 5.8" (14.7cm) .223 AR-15/M16. TA33-9 - Amber chevron BDC reticle calibrated for outstanding long-range target acquisition. Multi-layer, dichroic-mirror long, 9.9 oz. (280 g) wt. 4X magnification, 32mm ­objective lens. for AR-style .308 rifles. identification and hit probability. coated lens for outstanding heads-up, both- #892-810-432AK Spec. Forces ACOG 2H1036T94. $ 1,092.25 #892-000-030AK T A33-8, 3x30 Amber Chevron ACOG Features ample 6x magnification, eye-open targeting. Adjustable for windage and elevation +/-30 for .223 2H1014V70...... $ 1,068.45 superb lens clarity, unbeatable MOA, one click per inch at 100 yards. Housing is investment TA11 3.5x35 - A larger ACOG #892-000-069AK TA33G-H, 3x30 Green Horseshoe ACOG low-light capability, and integral cast from A357-T6 aluminum alloy; mount of forged 7075-T6 with the exclusive Bindon Aim- for .223 2H1014D70...... 1,068.45 topside MIL-STD 1913 Picatinny rail for mounting a red dot aluminum provides rock-solid mounting to any MIL-STD 1913 ing Concept (BAC) for “quick- #892-000-029AK T A33-9, 3x30 Amber Chevron ACOG reflex sight or other supplementary sight. Manual override lets Picatinny flattop rail, with return to zero after removal and re- as-thinking” aiming. Built-in for .308 2H1014V70...... 1,068.45 you adjust reticle brightness by rotating the sleeve on the rear installation. ab range-finding reticle for ranges eyepiece. The bright, red, chevron (upside down “V”) reticle aids TA31F 4x32 - Compact, 4x magnifi- SPECS: Aluminum housing and mount, hard-anodized, dark gray, up to 800 yds. Mounts on the in fast, instinctive target acquisition, with additional bullet 7 1 cation scope clamps to a MIL-STD matte finish. 4 ⁄8" (cm) long, 2 ⁄16" (5.2cm) wide. 12.3 oz. (348g) AR-15/M16 handle without drop compensated (BDC) estimated aiming points marked in 1913 Picatinny receiver rail and fea- weight. 42mm objective diameter. Includes lens cleaning pen, Al- modifications; allows use of standard issue sights. 100 meter increments starting at 400 meters. .223/5.56 model tures a bright, red Chevron reticle len wrench, and instruction booklet. SPECS: Forged 7070-T6 aluminum housing, black, anodized, coat- is calibrated for U.S. military M855 cartridge out to 800 meters. that is lit by both fiber optics and #892-000-038AK RX30 Reflex Sight w/Mount, ed lenses. 8" (20cm) long, 14 oz.(396 g) wt. 3.5X magnification, .308/7.62 model is calibrated for U.S. M80 cartridge out to 1,200 Tritium. Gives a vivid sight picture 2H604T65...... $ 637.50 35mm objective lens. Adjustable for windage and elevation. meters. Dry nitrogen filled to eliminate fogging, and waterproof at distances up to 800 meters. Uses #892-800-335AK 3.5x35 ACOG 2H1191T23. . . . $ 1,254.60 to 328 feet (100m). Mounts to MIL-STD 1913 Picatinny and simi- RX06 REFLEX II SIGHT - Advanced op- the Bindon Aiming concept (BAC) lar flattop rails with the included TA75 base; scope/base may be tics provide enhanced, wide-band, light TA44 1.5x16 - The smallest, light- for excellent, both-eyes-open, target removed and reinstalled as a unit without loss of zero. transmission for faster target acquisi- est ACOG we offer, the ultra-com- acquisition. Reticle looks like an upside down “V” and provides SPECS: Forged 7075-T6 aluminum housing, matte black anod- tion in a broad range of shooting situ- pact TA44 delivers fast targeting benefits similar to a triangle reticle, while covering less of the ations. 12.5 MOA Triangle reticle gives and outstanding mobility on light- target. Sight tunnel retains use of iron sights. ized; coated lenses. Approximately 9" (22.9cm) long. 38.8 oz. (1.2 k) weight. 6x magnification, 48mm objective lens. Adjustable for lightning fast, very precise aiming in weight tactical carbines. Perfect SPECS: Forged 7075-T6 aluminum housing, black, anodized; coat- windage and elevation. Includes TA75 rail adapter, Pelican hardshell bright daylight or total darkness at any distance. Includes po- for entry teams and other tactical ed lenses. Approximately 5.8" (14.7cm) long, 10 oz. (284 g) weight. carrying case, Lenspen, and manual. larizing filter, rubber lens cover and lens cleaning pen. Select operators. Dual-illuminated reticle 4X magnification, 32mm objective lens. Adjustable for windage from sight mounts above. ab is a bright, easy-to-acquire, red dot #892-000-044AK 6x48 Red Chevron ACOG, 5.56/.223, 1 and elevation. SPECS: ⁄4 2H00VBX...... $ 2,278.00 Aluminum housing, gray, hard-anodized ­finish, 4 " within a circle, and modest 1.5x #892-000-021AK 4x32 Red Chevron ACOG, (10.7cm) long, 4.2 oz. (119g) wt. magnification ensures a wide field 2H1156T48...... $ 1,218.05 #892-000-045AK 6x48 Red Chevron ACOG, 7.62/.308, #892-112-125AK RX06 Reflex II Triangle Sight, of view (7.4°, 39 ft. at 100 yards) for fast target acquisition under 2H2161D45...... 2,278.00 2H411V44...... $ 433.50 stress. Mounts directly to A2-type carry handle; tunnel in the TA31RCO 4x32 - Currently in service 892-000-090AK 6x48 Green Chevron ACOG, 7.62/.308, integral base allows use of standard-issue sights. as the Rifle Combat Optic (RCO) of 2H2161V45...... 2,278.00 TENEBRAEX KILLFLASH GUARD - Anti-­reflec­tion the United States Marine Corps, the device prevents glare and reflected images from in- SPECS: Forged 7070-T6 aluminum housing, black, anodized, coat- RUBBER EYEPIECE FOR ACOG - Shades the rear ocular lens for ed lenses. 4.1" (cm) long. 5.1 oz. (145g) weight. 1.5X magnification, TA31RCO is designed specifically terfering with sight picture on Reflex sights. for the 14.5" barreled M4 carbine. even better definition of the reticle. SPECS: Aluminum, matte, black. Honeycomb screen. 16mm objective lens. Adjustable for windage and elevation. 1 1 The bright, red, upside down “V” SPECS: Black rubber. Fits 1 ⁄8" (28.6mm) - 1 ⁄4" (31.8mm) dia. lens. .76" (19.3mm) long 1.1" (2.8cm) diameter. #892-000-052AK 1.5x16 Red Circle/Dot ACOG, #291-060-100AK ACOG Eyepiece 1B16X15. . . . . $ 19.99 2H874T31...... $ 920.55 reticle gives fast, instinctive target #892-802-022AK Killflash 2H32T30...... $ 34.00 acquisition at close range, and is bul- ACOG BIKINI COVER - Flexible rubber lens let drop compensated (BDC) to the covers seal out ­unwanted moisture and de- trajectory of military-issue 5.56 NATO ammunition for high hit bris; comes equipped with a rubber pull tab probability out to 800 meters. Features the original TA31’s long Start Earning $$ - Have a web page dedicated to for fast installation and removal. eye relief, ample 4x magnification, superior lens clarity, low- firearms? Become a Brownells affiliate and earn money! 1 SPECS: Rubber, black. 5 ⁄2" (14cm) long. Fits light capability, and Bindon Aiming Concept (BAC) for quick, 4x32 ACOG scopes only. both eyes open, aiming. Mounts to MIL-STD 1913 Picatinny and More info on our homepage at www.brownells.com #892-801-052AK ACOG Bikini Cover 2H14T79. . .$ 16.99 similar flattop rails; base may be removed to allow installation

order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 269 Models TRIJICON RMR SIGHT VORTEX OPTICS RED DOT SCOPES TRUGLO RED DOT SIGHTS Compact, Ruggedized Red Dot Sight System #892-000-050AK RM01 LED RMR Sight, 4 MOA, Model Fast, Both-Eyes-Open Aiming, Fast Sight Pickup, Wide Field Of View For Fast, Accurate Targeting 2H519T86...... $ 547.40 Unlimited Eye Relief, Wide Field Of View #892-000-051AK RM02 LED RMR Sight, 6.5 MOA, These sights offer unlimited eye relief and a wide field of view, As tough as Trijicon’s legend- 2H519T86...... 547.40 Compact, low-profile optics allow fast, both eyes-open making them extremely versatile for sport, tactical, and hunting ary ACOG® scopes, the low-profile #892-000-063AK RM03 Dual-Illum. RMR Sight, 13 MOA, sighting with the option of 1x or 2x magnification for added applications. Shock-resistant up to .50 caliber for reliable service RMR™ (Ruggedized Miniature Re- 2H457D31...... $ 481.95 versatility. A bright red or green aiming dot, a wide field of view, on almost any firearm platform. Integral, weaver-style base on flex) sight enables fast, both-eyes- #892-000-064AK RM04 Dual-Illum. RMR Sight, 7 MOA, unlimited eye relief, and multi-coated lenses that are parallax- all models gives rock-solid mounting and easy installation. free past 50 yards help you lock onto your target quickly. The open, target acquisition—even in 2H457D31...... 481.95 30mm RED DOT SIGHT - Rugged, wa- non-magnifying internal optics can be supplemented by the accessories poor lighting conditions. Unlimited #892-000-065AK RM05 Dual-Illum. RMR Sight, 9 MOA, terproof and fog-proof sights sights included, screw-on, 2x magnifier. Machined aluminum body is eye relief allows natural presen- 2H457D31...... 467.50 feature a 5 MOA dot size for fast target & O-ring sealed and nitrogen-purged to be water-, fog-, and shock- tation from almost any shooting #892-000-086AK RM06 Adj LED RMR Sight, 3.25 MOA, acquisition, 11 brightness control set- proof. Fits MIL-STD 1913 Picatinny rails and Weaver-style position, plus clear, unobstructed 2H561V56...... $ 591.60 tings, fingertip windage and elevation bases found on a wide variety of guns, including flattop AR-15/ panoramic views for maximum situational awareness. Mount #892-000-087AK RM06-33 Adj. LED RMR, Sight+Mount, adjustments, and lens covers. Multi- M16s, tactical shotguns, sporting rifles, and competition pistols. an RMR on your rifle to supplement your ACOG, and you’re 3.25 MOA 2H643V57...... 678.30 coated lenses provide more than 95% ready to address targets at any range. Performs in the harshest #892-000-088AK RM07 Adj LED RMR Sight, 6.5 MOA, Rear-facing, rubber-sealed buttons let you control the aiming Traditional optics light transmission for superior clarity dot brightness (10 position) and ultra-low-intensity night vision operating conditions thanks to a computer-optimized geometric 2H561V56...... 591.60 and brightness. Traditional model fea- mode, with a separate side control for power on/off. housing of high-strength, forged, military-grade, aluminum that #892-000-089AK RM07-33 Adj. LED RMR, Sight+Mount, tures a single red-colored dot reticle. absorbs shock and diverts stress away from the lens. Simple to 6.5 MOA 2H643V57...... 678.30 SPARC – Ideal for the AR-15/ Dual Color offers the same dot reticle operate, no switches to toggle, or forget to activate under stress, #892-000-095AK RM08A Dual-Illum RMR Sight, M16 platform or a tactical shot- with selectable illumination in red or because the sight is always on. The True-Color 28-layer coated, 12.9 MOA Triangle 2H457V31...... 481.95 gun, the compact “Speed Point green for improved visibility in all light non-magnifying lens delivers a crisp, clear shooting picture. Aiming for Rapid Combat” sight conditions. Both have 1 MOA click ad- Fully adjustable for windage and elevation, 1 MOA per audible RMR SIGHT MOUNTS – Strong, lightweight aluminum mounts features a 2 MOA red aiming dot justments. Dual Color click. Each RMR is pre-adjusted at the factory to be parallax-free provide a secure, solid platform ™ with 10-step adjustable bright- SPECS: Aluminum body, black, matte at 50 meters. LED models run over 17,000 hours on one CR-2032 for Trijicon’s RMR red dot sights. ness for operation in a wide finish. 3.75" (9.6cm) long x 2" (6.4cm) wide. 7.9 oz. wt. Includes lithium battery (included) or up to 4 years in dark storage. RM01 RM33 provides a low-profile mount range of lighting conditions. instructions, lens covers, and CR2032 battery. 1X magnification x projects a 4 MOA red dot, while RM02 features a 6.5 MOA red on Picatinny rails; attaches to rail Multi-height mount clamps to 30mm objective. dot. Battery-free Dual-Illuminated models use a combination with a full-length locking bar and RM55 any MIL-STD 1913 Picatinny #902-000-090AK Traditional Red Dot 2K54V42. . . $ 77.28 of powerful, light-gathering fiber optics and self-illuminating two recessed hex-head setscrews. rail. For an AR-15 installation, #902-000-105AK Dual Color Red Dot 2K57V88. . . .83.50 Tritium to project a bright amber dot on the sight in any light RM34 offers Picatinny rail mounting interchangeable adapters let conditions from pitch darkness to broad daylight. Automatically with extra elevation; attaches to rail OPEN RED DOT SIGHT - Water- and you position the SPARC for ab- adjusts brightness and contrast of reticle to ambient light. RM03 with a full-length locking bar and an shock-resistant sights feature a tube- easy-to-grasp, grooved, thumbscrew solute center co-witness or lower - 13 MOA dot; RM04 - 7 MOA dot; RM05 - 9 MOA dot; RM08A 1 less design for maximum simplicity and ⁄3 co-witness with factory height – 12.9 MOA amber triangle. Adjustable LED models have eight for fast attachment. Steel RM44 al- minimal weight. Special lens coatings “iron” sights. Click adjustable in reticle brightness levels that can be set manually, or the user can lows an RMR to be mounted on Glock With 2x Magnifier completely eliminate double dot and 1 MOA increments for windage select auto mode that automatically selects the brightness suit- pistols in place of the rear sight. Ma- split images. Tru-Point model features a and elevation, with a 90 MOA maximum range of adjustment. able for ambient light conditions. These models include: RM06 chined aluminum RM55 positions RM34 4 MOA, red, aiming dot for quick sight- Runs on two CR-2354 lithium batteries (included) that provide Tru-Point –3.25 MOA red dot; RM06-33 – RM06 sight plus the RM33 Pica- the RMR at a 45° angle, on the left or ing. “Auto Mode” uses a light-sensitive up to 120 hours run time at maximum brightness setting. tinny mount; RM07 - 6.5 MOA red dot; RM07-33 – RM07 sight right side of a Picatinny rail. Mount behind your primary optic rheostat for automatic brightness con- SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Fully plus the RM33 Picatinny mount. All RMR models come shipped for fast transition from a magnified view to close-in sighting by trol; “Manual Mode” overrides rheostat coated optics. 2 MOA red aiming dot. 22mm obj. dia. x 3" long. in a water-resistant, dustproof, and crushproof Pelican™ case. rotating the rifle slightly. Locking bar and easy-to-grasp grooved for fixed brightness when desired. Dial 5.2 oz. weight. Includes screw-on 2x magnifier, bikini cover, two Mounts sold below. ab thumbscrew ensure fast attachment. windage and elevation adjustment CR‑2354 lithium batteries, and instructions. Fits MIL-STD 1913 Pica- SPECS: 7075 T6 aluminum housing, hardcoat anodized, matte SPECS: Aluminum, hardcoat anodized matte black. Heights with locking screw for easy sight-in. 1 tinny rails and Weaver-style bases. black. Acrylic lens. 1¾" (4.5cm) long, 1 ⁄8" (2.8cm) wide, 1" (2.5cm) measured from top of rail to bottom of sight. Fits Picatinny rails. Battery can be replaced without remov- 7 #100-005-947AK SPARC Red Dot Sight, high. 1.2 oz (34g) weight. Waterproof to 66 feet (20m). Carry case, RM33 - ¼" (6.4mm) high. RM34 - ⁄8" (2.2cm) high. RM44 - Steel, ing the sight from the mount. Protective MR/DC 9 3B189X99...... $ 199.99 CR-2032 battery (LED models), and instructions included; mounts oxide coated, matte black. ⁄64" (3.6mm) high. RM55 - Aluminum, cover activates “Sleep-Mode” to extend sold separately, below. RM01 – 4.0 MOA LED red dot. RM02 – 6.5 hardcoat anodized matte black. Offset 45°. STRIKEFIRE – Compact battery life. Multi-Reticle/Dual Color (MR/DC) model deliv- MOA LED red dot. RM03 - 13.0 MOA amber dot. RM04 - 7.0 MOA #892-000-057AK RM33 Mount 2H101T85. . . . . $ 109.99 scope with an adjustable- ers maximum versatility with four different reticle settings: amber dot. RM05 - 9.0 MOA amber dot. RM06 – 3.25 MOA LED #892-000-058AK RM34 Mount 2H00TPU...... 114.75 intensity 4 MOA dot, wide 10 MOA dot, 15 MOA peep, 3 MOA center dot, and standard red dot. RM07 – 6.5 MOA LED red dot. RM06-33/RM07-33 – specs #892-000-084AK RM44 Glock Pistol Mnt 2H00DZA. . 97.30 field of view, and unlim- crosshair. Offers dual-color, red or green illumination with five for the RM33 mount given below. RM08A – 12.9 MOA amber fiber- #892-000-085AK RM55 Rail Offset Adapter, ited eye relief. Rugged, brightness settings in both colors. Precise 1 MOA click adjust- optic/Tritium triangle. 2H00TPU...... 84.15 one-piece aluminum alloy ments for windage and elevation. Does not feature automatic body was recoil tested to brightness control. survive the pounding of SPECS: Aluminum body, black, matte finish. Includes instructions, 1,000 rounds of .375 H&H lens cover, and CR2032 battery. Tru-Point - 1.97" (5cm) long x 1.1" PRECISION REFLEX TRIJICON TRIPOWER TACTICAL SIGHT Magnum hunting ammo. (2.8cm) wide. 1.7 oz. wt. 1X magnification, 26mm window. FOV - 42' at 100 yd. MR/DC - 3.3" (8.4cm) long x 1.4" (3.5cm) wide. 4.1 oz. Three Light Sources, Ensures Click adjustable in ½ MOA RMR SIGHT SCOPE MOUNT increments for windage and elevation, with a 100 MOA maxi- wt. 1X magnification, 34mm window. FOV - 74' at 100 yd. Aiming Point Is Always Visible For Mounting Trijicon RMR Sight mum range of adjustment. Compatible with night vision optics. #902-000-091AK Tru-Point Red Dot 2K242V68 . . $ 249.99 To Any 30mm Scope Tube Multiple light source, optical sight SF-BR-AR15 – Tactical model with a red aiming dot, and an ex- #902-000-118AK MR/DC Red Dot 2K63V08 . . . . . 79.99 makes sure the chevron reticle is tra-height ring mount to position the scope at the correct height Machined aluminum mount lets you always illuminated for reliable tar- on a flattop AR-15. SFRD-AR15 – Lets you switch between a red install a Trijicon RMR reflex sight on a get engagement. Integrated fiber dot and a green dot at the touch of a button to set the best color LEUPOLD 30mm scope tube. Enables fast transition optic system automatically adjusts for the prevailing light conditions. Same mount as SF-BR-AR15. from long-range to close-in targeting sim- brightness to match light condi- SFRD-HUNT – Also lets you switch between a red and a green dot ANTI-REFLECTION DEVICE ply by moving your eye. Lets you position tions. In total darkness, tritium-illu- to suit light conditions, and comes with a low mount for installa- Low Profile, Eliminates the RMR to the left, right, or at any angle tion on hunting rifles and shotguns. All models run on one CR-2 mination provides a distinct aiming Reflection From Objective Lens in between. Can also replace the ring top half on Precision Reflex point. Battery backup system lets you set reticle brightness for lithium battery (included) that provides up to 130 hours (red) 30mm scope rings. tactical entry and critical, low-light situations. Features fifteen or 420 hours (green) run time at maximum brightness setting. Tiny honeycomb baffles considerably de- SPECS: 6061 T6 aluminum, hardcoat anodized, black. 1¾" (4.4cm) SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Fully 7 day and five night vision settings, auto shut-off and push button crease light reflection from objective lenses and long, 1 ⁄8" (4.7cm) wide, 1¾" (4.4cm) high. 2 oz. (57g) wt. controls. Reticle is 14.4 MOA tall and 16.6 MOA wide, equals coated optics. 4 MOA aiming dot. 30mm obj. dia. x 6.1" long. 7.2oz. won’t interfere with sight picture. Perfect for the shooter who #714-000-018AK RMR Sight Scope Mount, standard military silhouette at 100 meters to help determine weight. Includes screw-on 2x magnifier, flip-up scope covers, CR2 wants to remain hidden and undetected. Easy-to-use design 4A33V75...... $ 39.99 range. 30mm tube, includes Weaver-style mounting ring. Sealed lithium battery, and instructions. Fits MIL-STD 1913 Picatinny rails snaps snugly onto 40mm fixed objective, non-threaded scopes against dust and waterproof to a depth of 100 feet. ab and Weaver-style bases. while front edge remains flush with the outside for a tight seal. 1 SPECS: Aluminum body, black, matte finish. 5 ⁄4" (13.3cm) long. #100-005-948AK SFRD-HUNT Strikefire Red/Green Cleans effortlessly with water or blowing air. 3 9 4.7 oz. (132 g) wt. Uses (2) CR1/3N lithium batteries. Includes (4) Dot Scope 3B159X99 ...... $ 169.99 SPECS: Molded plastic, black. 1 ⁄4" (4.5cm) diameter, ⁄16" (1.4cm) trijicon rmr batteries, LensPen, Scopecoat, 30mm mounting ring, fiber optic #100-005-949AK SF-BR-AR15 Strikefire Red Dot Scope, overall thickness. Fits non-threaded 40mm scopes with an inside cover, and hard carry case. 3B159X99...... 169.99 objective diameter of 1.690 +/- .005" and a depth of .052-.108". #892-000-010AK Tripower Tactical Sight, 100-008-737AK SFRD-AR15 Strikefire Red/Green Dot #526-000-087AK Anti-Reflection Device, 2H661T64...... $ 697.00 Scope 3B165Z00 ...... 169.99 6B16Y46...... $ 18.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 270 SINCE 1939 Office/Tech: 641-623-5401 LEUPOLD SCOPES optics High-Resolution Optics, Superb Light Transmission & Crystal Clear Images ADJ. RANGE/ OAL/MOUNT STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE #526-000-129AK 3.5-10x40mm Matte Duplex 58 MOA/¼ 3.6" 12.6"/5.8" 12.6 oz./357g 6B00AVB $ 479.99 #526-000-130AK 3.5-10x40mm Matte Duplex CDS 58 MOA/¼ 3.6" 12.6"/5.8" 12.6 oz./357g 6B00HDZ $ 539.99 & #526-000-132AK 4.5-14x40mm Matte Duplex CDS 71 MOA/¼ 3.7" 12.6"/5.8" 13 oz./369g 6B00HDZ $ 579.99 accessories VX-3 LONG EYE RELIEF HANDGUN SCOPES - Same features as the VX-3 rifle scope, including DiamondCoat 2™ lens coating, ¼ MOA click windage and elevation adjustments, and built-in range estimator – plus a generous 15" of eye relief. 1" O.D. tube. ADJ. RANGE/ OAL/MOUNT STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE #526-000-119AK 2.5-8x32mm Matte Duplex 100 MOA/¼ 15" 9.7"/4.1" 10.9 oz./309g 6B00YTP $ 549.99 #526-000-120AK 2.5-8x32mm Silver Duplex 100 MOA/¼ 15" 9.7"/4.1" 10.9 oz./309g 6B00AVB $ 549.99 VX-1 2-7x28 2-7x33 3-9x50 4x33 4.5-14x50 2.5-8x32 3-9x40 FX-3 6x42 RIMFIRE SCOPES - Compact, lightweight scopes specifically designed for rimfire rifles. Available in VX-1 or VX-2 configuration, Leupold scopes are renowned for their crystal-clear glass, superior light transmission, and crisp, clean images prized by target with 1" O.D. tubes. Parallax settings: 60 yd for 2-7x28 models; 10m to infinity for 3-9x40 AO. 1 shooters, hunters, law enforcement personnel, and tactical competitors. Click adjustable, ¼ or ⁄8 MOA turrets offer precise elevation and windage adjustments for repeatable accuracy. Rigid, rugged body tubes are constructed of 6061 T6 aluminum and are completely ADJ. RANGE/ OAL/MOUNT waterproof and fogproof. They’re backed by Leupold’s full warranty for the life of the scope, regardless of whether you’re the original STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE owner. Matte black finish is standard; some models also available with gloss black or matte silver finish. #526-000-134AK VX-1 2-7x28mm Gloss Fine Duplex 80 MOA/¼ 3.0" 9.9"/4.8" 8.2 oz./231g 6B00AVB $ 219.99 VX-1 RIFLESCOPES - Rugged general-purpose scopes feature variable power magnification, 1" O.D. tubes, standard multicoated #526-000-156AK VX-1 2-7x28mm Matte Fine Duplex 80 MOA/¼ 3.0" 9.9"/4.8" 8.2 oz./231g 6B00YTP $ 219.99 lenses, and Leupold’s lockable eyepiece to retain a secure focus. #526-000-135AK VX-2 3-9x33mm AO Matte Fine Duplex 64 MOA/¼ 3.0" 11.3"/5.0" 11 oz./312g 6B00HDZ $ 399.99 ADJ. RANGE/ OAL/MOUNT SHOTGUN/MUZZLE LOADER SCOPES - Calibrated for muzzle loaders (2 or 3 black powder pellet loads) and 12/20 gauge shotgun STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE sabot slug loads. Available in VX-1 configuration with heavy duplex crosshair or SA.B.R. (SAbot Ballistic Reticle) UltimateSlam™ #526-000-121AK 2-7x33mm Matte Duplex 65 MOA/¼ 3.7" 10.9"/5.2" 10.5 oz./298g 6B00HDZ $ 209.99 with precise holdover points at 50, 100, 150, 200, 250, and 300 yards. 1" O.D. tube. 75 yd parallax setting for 2-7x33mm model. #526-000-122AK 3-9x40mm Matte Duplex 56E/52W/ ¼ 3.7" 12.2"/5.6" 12 oz./340g 6B00YTP $ 229.99 ADJ. RANGE/ OAL/MOUNT #526-000-123AK 4-12x40mm Matte Duplex 50 MOA/¼ 3.7" 12.3"/5.6" 13 oz./369g 6B00AVB $ 299.99 STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE VX-2 RIFLESCOPES - Leupold’s Multicoat® 4 lens system delivers excellent clarity, brightness, and contrast in a broad range of light #526-000-117AK 3-9x40mm Matte SA.B.R. 65 MOA/¼ 4.2"-3.7" 12.2"/5.6" 12 oz./340g 6B00AVB $ 269.99 conditions. Available in standard duplex crosshair or long-range ballistic duplex for precise holdover points on long-range targets. #526-000-118AK 3-9x40mm Silver SA.B.R. 65 MOA/¼ 4.2" -3.7" 12.2"/5.6" 12 oz./340g 6B00HDZ $ 269.99 1" O.D. tubes and lockable eyepiece for a secure focus. #526-000-133AK 2-7x33mm Matte VX-1 Heavy Duplex 65 MOA/¼ 4.2"-3.7" 10.8"/5.2" 10.5 oz./298g 6B00YTP $ 209.99 ADJ. RANGE/ OAL/MOUNT COMPETITION RIFLESCOPES - Leupold Competition riflescopes are proven winners, topping the rifles of some of the world’s finest STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE target shooters. Lightweight to meet strict weight requirements. Alumina® compatible to mount optical intensifiers, optimizers, ® #526-000-124AK 3-9x40mm Matte Duplex 56 MOA/¼ 3.7" 12.4"/5.6" 12 oz./340g 6B00HDZ $ 299.99 focus adapters, and RainCote lens covers, so you can adapt to changing light and weather conditions. Competition 45x45mm features a 30mm tube and side-focus parallax adjustment providing sharp, crisp images from 50 feet to infinity. Easy-to-grasp #526-000-125AK 3-9x40mm Matte LR Duplex 56 MOA/¼ 3.7" 12.4"/5.6" 12 oz./340g 6B00YTP $ 329.99 extra-tall target turrets facilitate quick adjustments. Competition Hunter 6x42mm AO has 1" tube and 42mm front objective lens #526-000-126AK 3-9x40mm Silver Duplex 56 MOA/¼ 3.7" 12.4"/5.6" 12 oz./340g 6B00AVB $ 299.99 to maximize light transmission. Adjustable objective (AO) provides sharp, crisp images from 50 feet to infinity. #526-000-127AK 3-9x50mm Matte Duplex 56 MOA/¼ 3.7" 12.1"/5.0" 13.7 oz./ 388g 6B00HDZ $ 379.99 ADJ. RANGE/ OAL/MOUNT FX™II RIFLESCOPES - A compact, rugged version of the VX-2 scope with fixed-power magnification. Made especially for hunters and STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE 1 shooters who appreciate the no-nonsense simplicity of a traditional fixed-power riflescope. 1" O.D. tube. #526-000-114AK 45x45mm Matte Fine Target 38 MOA/ ⁄8 (3.2") 15.9/7.1 20.3 oz./576g 6B00AVB $ 1,099.99 1 1 ADJ. RANGE/ OAL/MOUNT #526-000-115AK 45x45mm Matte ⁄8 min. Dot 38 MOA/ ⁄8 (3.2") 15.9/7.1 20.3 oz./576g 6B00HDZ $ 1,099.99 STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE #526-000-116AK FX-3 6x42mm AO Matte ½ min. Dot 64 MOA/¼ 4.4" 12.2"/5.3" 15 oz./425g 6B00YTP $ 469.99 #526-000-139AK 2.5x28mm Matte Duplex 110 MOA/¼ 9.3" 10.1"/5.6" 7.5 oz./213g 6B00YTP $ 309.99 #526-000-144AK 4x33mm Matte Wide Duplex 80 MOA/¼ 4.0" 10.5"/5.5" 9.3 oz./264g 6B00HDZ $ 309.99 LEUPOLD MARK 4® MR/T SCOPES #526-000-145AK 6x36mm Matte Duplex 64 MOA/¼ 4.3" 11.4"/5.9" 10 oz./284g 6B00YTP $ 309.99 1.5-5x20mm M2 ILLUMINATED SP - Features an Specialized Tactical Reticles For Fast, Precise Shot Placement engraved bullet drop compensation (BDC) dial VX-3 RIFLESCOPES - Leupold’s Xtended Twilight Lens System® gives incredible low-light clarity, and the proprietary Diamond- calibrated to .223/5.56mm NATO ballistics Coat 2™ lens coating provides excellent resistance to scratches. Dual cryogenic-treated ejector springs, same as the Mark 4 MIL/ The Mark 4 MR/T series features special-purpose tactical for 62 grain FMJ (.307 BC) bullets at 3,100 LE scopes, ensure consistent, repeatable tracking. Side-focus parallax adjustment and built-in range estimation function helps reticles that deliver fast, accurate shot placement, with the op- fps. Simply turn the dial to the appro- make long shots easy. Available with 1" or 30mm O.D. tube. Some models available with Leupold CDS™ custom elevation turret that tion of illuminated models for excellent low-light visibility and priate range setting, aim, and squeeze allows you to quickly dial in your range for dead-on hits without holdover. night vision compatibility. All models have finger-adjustable the trigger for dead-on accuracy out to windage and elevation knobs with audible, tactile clicks. Illu- 500 yards and beyond. Leupold Special 2.5-8x36mm VX-3 – 30mm TUBE ™ minated reticles with Xtended Twilight Lens System deliver Purpose illuminated reticle combines ADJ. RANGE/ OAL/MOUNT extreme edge to edge clarity in the visual field, outstanding con- all the features of a German #4 Mil- STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE trast, 8 intensity settings for a bright sight picture in extreme Dot and circle reticle. #100-008-603AK 4.5-14x40mm Matte Duplex 116 MOA/¼ 3.7" (4.4") 12.6"/5.9" 15.1 oz./428g 6B00PUA $ 679.99 low-light conditions, an innovative motion sensor system, and a user-friendly interface. 2.5-8x36mm M1 ILLUMINATED TMR® - Tactical Milling Reticle® #100-008-599AK 4.5-14x50mm Matte Duplex 125 MOA/¼ 3.6" (4.4") 12.2"/5.5" 16.5 oz./468g 6B00ZAY $ 759.99 is similar to a Mil-Dot reticle, except it uses fine “hash” marks in- #100-008-606AK 4.5-14x50mm Matte Varmint 125 MOA/¼ 3.6" (4.4") 12.2"/5.5" 16.5 oz./468g 6B00PUA $ 839.99 1.5-5x20mm SP - Black non-illuminated Leupold stead of traditional Mil-Dots for more accurate range estimation. Special Purpose (SP) reticle combines all the #100-008-601AK 6.5-20x40mm Matte Fine Duplex 90 MOA/¼ 3.7" (5.0") 14.5"/6.8" 15.6 oz./442g 6B00XCH $ 759.99 features of a German #4 Mil-Dot and circle 2.5-8x36mm M2 ILLUMINATED MIL-DOT/TMR - Features an #100-008-602AK 6.5-20x40mm Silver Fine Duplex 90 MOA/¼ 3.7" (5.0") 14.5"/6.8" 15.6 oz./442g 6B00ZAY $ 759.99 reticle into one that works great for tacti- engraved bullet drop compensation (BDC) dial calibrated to the #100-008-608AK 6.5-20x50mm Matte Fine Duplex 94 MOA/¼ 3.7" (4.5") 14.4"/6.5" 20.4 oz./578g 6B00ZAY $ 899.99 cal use or hunting. Index Matched Lens ballistics of .308 Win and 7.62x51mm loads shooting 168 grain ® #100-008-609AK 6.5-20x50mm Silver Fine Duplex 94 MOA/¼ 3.7" (4.5") 14.4"/6.5" 20.4 oz./578g 6B00PUH $ 899.99 System provides unparalleled bright- 1.5-5x20mm (.462 BC) bullets at 2,650 fps. Choice of Mil-Dot reticle or illu- ness and extremely sharp resolution minated Tactical Milling Reticle (TMR). #100-008-611AK 6.5-20x50mm Matte Varmint 94 MOA/¼ 3.7" (4.5") 14.4"/6.5" 20.4 oz./578g 6B00PUA $ 979.99 across the entire visual field. SPECS: 6061-T6 aluminum, hardcoat anodized, matte black. #100-008-607AK 8.5-25x50mm Matte Varmint 94 MOA/¼ 3.7" (5.3") 14.4"/6.5" 20.5 oz./581g 6B00XCH $ 1,049.99 #100-008-612AK 8.5-25x50mm Matte Fine Duplex 94 MOA/¼ 3.7" (5.3") 14.4"/6.5" 20.5 oz./581g 6B00XCH $ 969.99 STOCK # MAG./OBJ. TUBE RETICLE ADJ. RANGE/ EYE OAL/MNT. WEIGHT PRICE #100-008-613AK 8.5-25x50mm Matte Target Dot 94 MOA/¼ 3.7" (5.3") 14.4"/6.5" 20.5 oz./581g 6B00ZAY $ 1,019.99 DIA. CLICK VALUE RELIEF LENGTH #526-000-138AK 1.5-5x20mm 1" SP 80 MOA/¼ 3.6" 9.3"/5.5" 9.7oz./275g 6B00HDZ $ 649.99 VX-3 – 1" TUBE #526-000-140AK 1.5-5x-20mm 30mm M2 Illum. SP 120 MOA/½ 3.6" 9.3"/5.8" 15oz./425g 6B00AVB $ 899.99 ADJ. RANGE/ OAL/MOUNT #526-000-141AK 2.5-8x36mm 30mm M1 Illum. TMR 90 MOA/¼ 3.0" 11.3"/5.8" 16oz./454g 6B00HDZ $ 1,099.99 STOCK # MAG./OBJ. FINISH RETICLE CLICK VALUE EYE RELIEF LENGTH WEIGHT PRICE #526-000-142AK 2.5-8x36mm 30mm M2 Illum. Mil-Dot 90 MOA/½ 3.0" 11.3"/5.8" 16oz./454g 6B00YTP $ 1,199.99 #526-000-128AK 2.5-8x36mm Matte Duplex 74 MOA/¼ 3.6" 11.4"/5.1" 11.4 oz./323g 6B00YTP $ 399.99 #526-000-143AK 2.5-8x36mm 30mm M2 Illum. TMR 90 MOA/½ 3.0" 11.3"/5.8" 16oz./454g 6B00AVB $ 1,199.99

order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 271 LEUPOLD LEUPOLD LEUPOLD MARK 4® LR/T SCOPE MARK 4® CQ/T® SCOPE MARK 8® CLOSE QUARTERS BATTLE 3.5-10x40 30mm Tube, High-Resolution Optics 1-3x14mm Red Dot Scope SNIPER SCOPE illuminated front focal plane reticle to provide for accurate & Repeatable Tracking For For Tactical & range estimations at any magnification level. Illuminated Long-Range Accuracy Competition Use M-TMR™ “staircased” reticle allows quick, instinctive target acquisition at both low and high magnification. Audible 0.1 Variable-power, precison tactical Multi-function Close mil windage and elevation clicks with secure auto-locking fea- scopes have 30mm tubes, Leupold’s Quarters/Tactical scope ture help prevent accidental changes in the field. One complete legendary high-resolution optics, and combines the fast target accessories revolution of the elevation or windage turret equals 10 mil of 4.5-14x40 repeatable tracking for long range ac- acquisition of a red dot Front Focal Plane Reticle For Accurate Range reticle adjustment for fast precise, long-range targeting. In- & curacy. They feature side parallax ad- sight with the utility of dex Matched Lens System® delivers unsurpassed sharpness, Estimation At Any Magnification justment for fast, easy focusing from 50 1-3x variable power magnification. Circle-dot reticle with built- brightness, and low-light contrast. DiamondCoat 2™ lens coat- yards to infinity. Large, easy-to-grasp in range estimating capability gives accurate hold-over and lead Close Quarters Battle Sniper Scope (CQBSS) has a large ing offers superior scratch resistance. 4.5-14x50 target turrets with repeatable tracking angle on moving targets; 11 illumination settings allow perfect 35mm diameter tube, 1.1 to 8x variable magnification, and an SPECS: 6061 T6 aluminum, matte black finish. 35mm O.D. tube. Illum Mil-Dot allow an easy return to zero once you’re contrast during any light condition. 1x magnification allows you optics sighted in. M5-FF front focal plane to shoot with both eyes open; 2x and 3x magnification help you STOCK # MAG./OBJ. RETICLE ADJ. RANGE/ EYE OAL/MOUNT W T. PRICE scopes maintain the exact spacing of accurately engage targets out to 300 yards and beyond. Reticle CLICK VALUE RELIEF LENGTH the Mil-Dot subtensions regardless of runs on AA batteries up to 600 hours; when turned off the reticle the magnification selected. All other turns black and remains visible. MIL-STD 1913 Picatinny rails #526-000-136AK 1.1-8x24mm Illum. M-TMR 100E/150W/.1 Mil 3.3" 11.75"/6.6" 23 oz./657g 6B00YTP $ 2,999.99 models are rear focal plane scopes that on the top and right side accept small lights, night vision gear or change subtension spacing at each dif- laser designators. Includes flip-open lens covers. ½ MOA click ferent magnification setting. M1/M5/ adjustable for windage and elevation. A.R.M.S.® #12™ CQ/T 4.5-14x50 Tgt models have ¼ MOA elevation and Mount clamps the CQ/T scope to a flattop AR-15/M16 or any NIKON AR-15/M16/AR-STYLE .308 Illum TMR windage adjustments; M3 models have MIL-STD 1913 Picatinny base. Features quick on/off throw le- M-223 3-12x42mmSF – 1 MOA elevation and ½ MOA windage vers that maintain a consistent, repeatable zero. ab M-223/M-308 SCOPES Long-range models fea- adjustments. Choose from Mil-Dot, Il- SPECS: Aluminum tube, anodized, matte black. 8.8" (22.4cm) long. Optimized For AR-Platform Rifles ture a side focus knob luminated Mil-Dot and Illuminated 2" to 2.8" (5.1 to 7.1cm) eye relief. 17.5 oz. (496g) wt. ½ MOA click Models for instant parallax ad- Tactical Milling Reticle (TMR) similar adjustments. Dot size: 3 MOA at 3x, 9 MOA at 1x. Circle size at Rugged, variable-power scopes are specifically engineered to justment without taking to a Mil-Dot reticle but with finer sta- 3X: 18" at 25 yards, 6' at 100 yards. Uses two AA batteries (not help shooters get the most from the AR platform, with quick, your eye away from the ® dia for more precise range estimation. Available reticle styles included). A.R.M.S. #12™ CQ/T Mount – Aluminum and steel accurate hits at a wide variety of distances. M-223 scopes are rear objective. 60 MOA and magnification options listed below. construction, matte black finish. 2¾" (7cm) long. ballistically calibrated at the factory to match the trajectory windage/elevation adjustment range in precise ¼ MOA incre- SPECS: Aluminum tube, anodized, matte black. 30mm tube dia. #526-000-137AK Leupold Mark 4 CQ/T 1-3x14mm Scope, of .223/5.56mm, 55-grain polymer-tipped bullets traveling at ments. Includes anti-reflective lens cover that helps eliminate 6B00AVB...... $ 1,099.99 3,240 fps. M-308 scopes are calibrated for the .308/7.62 NATO, STOCK # MAGNIF. RETICLE W T. PRICE glare. Available with Nikoplex or BDC 600 reticle. #100-004-860AK A.R.M.S. #12 CQ/T Mnt 3A135V69. .145.00 1 (mm) 168-grain HPBT bullet. High-resolution optics and multi-layer SPECS: Aluminum tube, hardcoat anodized matte black. 13 ⁄8" OAL. coated lenses give superb clarity and light-gathering capacity, #526-000-064AK 4.5-14x50 M1 Mil-Dot 122oz (624g) 6B00HDZ $ 1,199.99 1" O.D. tube. Variable 3x-12x magnification, 42mm diameter objec- especially at dusk and dawn. All models provide an extra-wide tive lens. Parallax adjustable from 50 yds to infinity. 18.7oz. wt. #526-000-149AK 3.5-10x40 M5-FF Mil-Dot 19.5oz (553g) 6B00AVB $ 1,499.99 Sign Up for the range of windage and elevation click adjustments in ¼ or ½ MOA #100-006-125AK 3-12x42SF Nikoplex 6Z00AYT. . $ 449.95 #526-000-150AK 4.5-14x40 Tgt Mil-Dot 19.5oz (553g) 6B00HDZ $ 899.99 increments. Nikoplex models feature Nikon’s classic Nikoplex #100-006-126AK 3-12x42SF BDC 600 6Z00UAV . . . 459.95 #526-000-151AK 4.5-14x50 M1 Illum 16oz (454g) 6B00YTP $ 1,399.99 Top Rated cross-hair reticle and a Rapid Action Turret that lets you dial your elevation in 50 yard increments from 100 to 600 yards in M-308 4-16x42mmSF – Helps Mil-Dot Products Email less than one revolution. BDC 600 reticle allows instant range you maximize the long-range ca- #526-000-152AK 4.5-14x50 M1 Illum TMR 22oz (624g) 6B00AVB $ 1,399.99 and target adjustments without taking your eyes out of the scope pabilities of your AR-style .308. #526-000-153AK 6.5-20x50 M1 Mil-Dot 22oz (624g) 6B00HDZ $ 1,299.99 and losing the target. Open-circle aiming points at 200, 300, 400, Calibrated for the ballistic per- All The TOP products formance of the .308/7.62 NATO #526-000-154AK 6.5-20x50 M1 Illum TMR 22oz (624g) 6B00YTP $ 1,499.99 500, and 600 yards, with hash marks between them for mid- range targeting between those settings. BDC 800 reticle, avail- 168-grain bullet, the M-308 fea- #526-000-155AK 8.5-25x50 M1 Mil-Dot 22oz (624g) 6B00HDZ $ 1,399.99 as chosen by you! able on M-308 models only, features both open and closed-circle tures 95% light transmission, #526-476-380AK 10x40 M3 Mil-Dot 22oz (624g) 6B00AVB $ 1,499.99 www.brownells.com aiming points, in addition to hash marks to enable easy range and easy-to-operate Zero-Reset #526-518-500AK 3.5-10x40 M3 Mil-Dot 21oz (595g) 6B00YTP $ 1,199.99 adjustments out to 800 yards. tactical turrets. A one-piece, 20 MOA Picatinny-compatible base M-223 1-4x20mm – Point Blank is also included. Available with reticle offers a wide field of view Nikoplex or BDC 800 reticle. TRIJICON ACCUPOINT SCOPE for fast, accurate, instinctive SPECS: Aluminum tube, hardcoat anodized, matte black. 13.5" Tritium & Fiber Optic Illumination In A Traditional Scope Configuration shooting from 0 to 200 yards— (34.3cm) OAL. 1" (2.5cm) O.D. tube. Variable 4x-16x magnification. ideal for 3-gun matches. Reticle 42mm objective lens. Parallax adjustable from 50 yds to infinity. 3.7 Advanced, fiber optic/Tritium aiming-point illumination speeds target is similar to a standard duplex to 4" eye relief. 40 MOA adjustment range in ¼ MOA clicks. One- acquisition in all light conditions. Battery-free, illuminated reticle au- crosshair with 3 MOA dot; just piece 20 MOA Picatinny-compatible base included. tomatically adjusts aiming point brightness to existing light conditions; cover the target with the reticle 100-009-878AK 4-16x42SF Nikoplex 6Z00YTP. . $ 529.95 provides ideal reticle-to-target contrast and extends shooting hours. Manual brightness override lets you adjust the brightness to dot and squeeze the trigger; . 100-009-692AK 4-16x42SF BDC 800 6Z00HDZ. . . 549.95 your personal preference. Multi-layer coated lenses deliver superb clarity and light-gathering capacity without distortion. Variable Large easy-to-grasp target turrets with 120 MOA windage/el- power magnification with quick-focus eyepiece that gives exceptional edge-to-edge lens optical clarity. ab evation adjustment range in ½ MOA clicks. M-223 MOUNT – Clamps to flattop 3 SPECS: Forged 6061 tT6 aluminum body, hardcoat anodized, matte black. Coated lenses. TR-20 Series - 12¼" (31.1cm) OAL. 13.2 oz. SPECS: Aluminum tube, hardcoat anodized, matte black. 10 ⁄8" receiver rail and provides optimum 5 (374g) wt. TR21-3 - 10½" (26.7cm) OAL. 11.8 oz. (334g) wt. TR-22 Series - 13½" (34.3cm) long. 20.9 oz. (591g) wt. TR-23 Series – 13- ⁄8" OAL. 1" O.D. tube. Variable 1x-4x magnification, 20mm diameter height and eye relief for all of the 5 long (34.5cm) OAL. 26.9 oz. (762g) wt. TR24 - 10 ⁄16" (25.2cm) OAL. 14.4 oz. (408g) wt. objective lens. Parallax 100 yds, fixed; 4" long eye relief. 12 oz. wt. M-223 scopes. Positions the scope for a comfortable head position, while the STOCK # MODEL RETICLE MAGNIF. OBJ. DIA. BODY DIA. PRICE #100-006-122AK 1-4x20 Point Blank, 6Z00AYT...... $ 289.95 forward cantilever extends 2" forward #892-000-013AK TR20 Post w/amber triangle dot 3-9x 40mm 1" 2H747T82 $ 787.95 of the receiver for plenty of eye relief. #892-000-040AK TR20-1 Crosshair w/amber dot 3-9x 40mm 1" 2H747V82 $ 787.95 M-223 2-8x32mm – Variable Available with built-in 20 MOA eleva- 2x to 8x magnification with #892-000-041AK TR20-2 Mil-dot crosshair w/amber dot 3-9x 40mm 1" 2H747V82 $ 787.95 tion that aids in accurate long-range shooting past 600 yards 80 MOA windage/elevation without exceeding your scope’s elevation adjustment; standard 0 #892-000-071AK TR20-2G Mil-dot crosshair w/green dot 3-9x 40mm 1" 2H747D82 $ 787.95 adjustment range in ¼ MOA MOA model also available. Three steel crossbolts and full-length #892-000-042AK TR21-3 German #4 crosshair w/amber dot 1.25-4x 24mm 1" 2H725V58 $ 871.25 increments for extra-precise clamping bar secure mount to any MIL-STD 1913 Picatinny re- #892-000-043AK TR22-1 Crosshair w/amber dot 2.5-10x 56mm 30mm 2H852V07 $ 897.60 targeting. Available with ceiver rail. Can be used on other scopes with 1" O.D. tubes. Nikoplex or BDC 600 reticle. #892-000-070AK TR22-1G Crosshair w/green dot 2.5-10x 56mm 30mm 2H852D07 $ 897.60 SPECS: Aluminum hardcoat anodized, matte black. Steel mounting SPECS: Aluminum tube, hardware, black oxide finish. 5" O.A.L. 3½" center-to-center ring #892-000-072AK TR23-1G Crosshair w/green dot 5-20x 50mm 30mm 2H1088D37 $ 1,147.50 hardcoat anodized, matte spacing; 3.125" between ring edges. 20 MOA built-in elevation. #892-000-073AK TR23-2G Mil-dot crosshair w/green dot 5-20x 50mm 30mm 2H1088D37 $ 1,147.50 black. 11½" OAL. 1" O.D. tube. Variable 2x-8x magnification, 32mm Requires 3½" of rail space. 5.5 oz. wt. #892-000-054AK TR24-R Post w/red triangle dot 1-4x 24mm 30mm 2H846T51 $ 892.50 diameter objective lens. Parallax 100 yds, fixed; 4" long eye relief. 100-009-700AK M-223 Scope Mount, 0 MOA, 13.4 oz. wt. #892-000-056AK TR24-G Post w/green triangle dot 1-4x 24mm 30mm 2H846T51 $ 892.50 6Z60V00...... $ 79.95 #100-006-123AK 2-8x32 Nikoplex 6Z00UAV . . . . $ 329.95 #100-006-127AK M-223 Scope Mount, 20 MOA, #892-000-074AK TR24-3G German #4 crosshair w/green dot 1-4x 24mm 30mm 2H846D51 $ 892.50 #100-006-124AK 2-8x32 BDC 600 6Z00XCH. . . . . 349.95 6Z00XCH...... 99.95 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 272 SINCE 1939 Office/Tech: 641-623-5401 NIGHTFORCE NXS RIFLESCOPES LEUPOLD PRISMATIC RIFLE SCOPE FLATLINE OPS o ™ Purpose-Built, Combines The Speed Of A ACCU/LEVEL p Durable Precision Optics With 30mm Tubes Red Dot With The Reliability t Helps You Achieve True Vertical Hold ic Of A Traditional Scope Constructed to meet the specific needs of many different types of For Improved Accuracy s shooters, these top-quality precision optics come with a wide range of Compact, 1x magnifying & acc The Accu/Level scope level clamps options. Each mil-spec bonded lens is matched and hand-aligned for optic combines the fast tar- directly to the scope tube to help you optimal performance, while all air-to-glass surfaces receive Night- get acquisition, accuracy, and correct “cant error” for a dead-on true force’s proprietary multi-coating. All scopes feature a glass-etched, low-light capability of a red vertical hold that improves accuracy. illuminated reticle providing a crystal-clear, distortion-free image dot sight with the reliability and clarity of a traditional rifle esso Bright, fluorescent yellow bubble- with tremendous reliability in any lighting condition. Some models scope. Allows easy, both-eyes-open sighting that preserves depth ™ level pivots out into the open position for immediate use and offer ZeroStop adjustment for quick return-to-zero without counting perception and peripheral vision for quick reaction to changes swings back over the top of the scope for storage. Models avail- clicks or looking at the turret. NP-R1 reticle displays 1 MOA elevation in target—perfect for tactical operations or hunting applications able to fit 1", 30mm, and 34mm scope tubes. Accommodates both ri and 2 MOA hash mark windage measurements, both meant for long-range/tactical/varmint applications. NP-1RR ranging reticle, that require a low-magnification scope. Battery powered illumi-

left- and right-hand shooters. Ring clamp holds tight with two es great for long-range and varmint hunting, allows for target placement, based on known size, inside circular elements that assist nation module clamps to the side of the tube and illuminates the stainless steel Allen head screws. Integral accessory dovetail the shooter with estimating distances from 300-800 yards. NP-R2 reticle is a mil-style reticle with 2 MOA elevation and 5 MOA reticle in red for maximum contrast with target. Eight bright- accepts the Strong Arm Mount (below) for attaching a cosine hash mark windage measurements. NP-2DD reticle, favored by long-range benchrest shooters and low-light predator hunters, ness settings let you adjust the intensity of the etched circle- 1 1 indicator to your Accu/Level. ab features a 4 MOA (at 22x) tapered windage bar with ⁄8 MOA center-dot and another ⁄8 MOA dot holdover point located 4 MOA and-crosshairs reticle. Illumination module can be removed SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. below the center for use with most flat-shooting cartridges. FC-2 reticle has windage bar only with a dot in the center; designed for minimal weight and bulk. Fully adjustable for windage and 9 ⁄16" (1.5cm) long x 2½" (6.3cm) wide (closed), 4" (10.2cm) wide (open). for close range/tactical applications. MLR reticle displays ½-mil hash marks on both windage and elevation bars. Mil-Dot reticle elevation in precise ½ MOA clicks, with a 70 MOA adjustment #100-006-834AK 1" Accu/Level 5C00XCH. . . . . $ 129.95 consists of see-through dots and posts in order to provide the clearest, obstruction free sight picture. LV/MV/HV reticles allow for range. DiamondCoat 2™ lens treatment enhances light trans- #100-006-835AK 30mm Accu/Level 5C00ZAY. . . . 139.95 accurate shot placement with holdover marks at 100, 200, 300, 350, 400, 450, 500, 550 and 600 yards. Also included are windage mission and helps protect lens surface. Includes integrated base #100-006-836AK 34mm Accu/Level 5C00PUA. . . . 169.95 compensation marks in 5 and 10 mph increments. To choose the correct reticle, enter ballistic information into the calculator at with three optional height spacers to accommodate mounting on www.nightforcereticlecalculator.com. almost any firearm with Picatinny or Weaver-style rails. Also STRONG ARM COSINE INDICATOR MOUNT – Secure, SPECS: Forged 7075 T6 aluminum (Compact models) or 6061 T6 aluminum (full-size models), matte black hardcoat finish. 30mm tube compatible with standard 30mm scope rings and A.R.M.S. #22 machined aluminum mount slides onto the accessory O.D. Includes CR-2032 battery. Abbreviations in the tables below: ZS = Zerostop, E/W = elevation/windage in MOA. quick-detach throw-lever rings. Heavy duty, extra-thick walled dove tail of the Accu/Level to allow mounting of a cosine tube, plus sealed, fogproof and waterproof construction stands indicator for an unobstructed view of uphill and down- Compact NXS 1-4x24mm up hard use. hill trajectory angles. Designed to accept Flatline Ops 3 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. SPECS: Aluminum, anodized, matte black. 4 ⁄8" (11.1cm) long, 2" ACI/ADI or Sniper Tool Designs indicators. Secures to STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE (5.1cm) maximum width with Illumination Module installed. 30mm Accu/Level with two stainless steel screws. diameter tube. 8.4 oz. (237g) weight without base. Eye relief: 3" SPECS: 6061 T6 aluminum, Type III hardcoat anodized, #100-008-632AK FC-2 100/¼ 3.5" 8.8"/5.4" 17 oz./482g 4B00HDZ $ 1,263.00 9 1 (7.6cm). Uses (1) DL1/3N button-type battery, included. matte black. ⁄16" (1.5cm) wide x 2 ⁄8" (5.3cm) high. Stain- Compact NXS 2.5-10x32mm #526-000-090AK Prismatic Rifle Scope, less steel mounting screws included. 6B00PUA ...... $ 499.99 #100-006-837AK Strong Arm Mount 5C00BXC. . . . . $ 58.95 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE #100-008-634AK MV 100/¼ 3.7" 12"/5.7" 19 oz./539g 4B00AVB $ 1,357.00 #100-008-635AK HV 100/¼ 3.7" 12"/5.7" 19 oz./539g 4B00HDZ $ 1,357.00 NXS 5.5-22x56mm #100-008-636AK LV 100/¼ 3.7" 12"/5.7" 19 oz./539g 4B00YTP $ 1,357.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. #100-008-638AK NP-R2 100/¼ ZS 3.7" 12"/5.7" 19 oz./539g 4B00HDZ $ 1,544.00 STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE #100-008-639AK Mil-Dot 100/¼ ZS 3.7" 12"/5.7" 19 oz./539g 4B00YTP $ 1,544.00 #100-008-664AK NP-R1 100E/60W/¼ 3.9" 15.2"/6.6" 32 oz./907g 4B00HDZ $ 1,766.00 NXS 3.5-15x50mm #100-008-665AK NP-R1 100E/60W/¼ ZS 3.9" 15.2"/6.6" 32 oz./907g 4B00YTP $ 1,959.00 #100-008-666AK MLR 100E/60W/.1 Mil ZS 3.9" 15.2"/6.6" 32 oz./907g 4B00AVB $ 2,044.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. #100-008-667AK Mil-Dot 100E/60W/.1 Mil ZS 3.9" 15.2"/6.6" 32 oz./907g 4B00HDZ $ 2,044.00 STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE #100-008-668AK MLR 100E/60W/¼ 3.9" 15.2"/6.6" 32 oz./907g 4B00YTP $ 1,766.00 #100-008-640AK Mil-Dot 110E/80W/.1 Mil ZS 3.9" 14.7"/6.1" 30 oz./850g 4B00AVB $ 1,883.00 #100-008-669AK Mil-Dot 100E/60W/¼ ZS 3.9" 15.2"/6.6" 32 oz./907g 4B00AVB $ 1,959.00 #100-008-641AK MLR 110E/80W/.1 Mil ZS 3.9" 14.7"/6.1" 30 oz./850g 4B00HDZ $ 1,883.00 #100-008-670AK Mil-Dot 100E/60W/¼ 3.9" 15.2"/6.6" 32 oz./907g 4B00HDZ $ 1,766.00 #100-008-642AK NP-R1 110E/80W/¼ ZS 3.9" 14.7"/6.1" 30 oz./850g 4B00YTP $ 1,798.00 #100-008-671AK NP-R2 100E/60W/¼ 3.9" 15.2"/6.6" 32 oz./907g 4B00YTP $ 1,766.00 #100-008-643AK Mil-Dot 110E/80W/¼ ZS 3.9" 14.7"/6.1" 30 oz./850g 4B00AVB $ 1,798.00 #100-008-644AK NP-R1 110E/80W/¼ 3.9" 14.7"/6.1" 30 oz./850g 4B00HDZ $ 1,605.00 NXS 8-32x56mm #100-008-645AK NP-R2 110E/80W/¼ 3.9" 14.7"/6.1" 30 oz./850g 4B00YTP $ 1,605.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. #100-008-646AK MLR 110E/80W/¼ 3.9" 14.7"/6.1" 30 oz./850g 4B00AVB $ 1,605.00 STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE #100-008-647AK Mil-Dot 110E/80W/¼ 3.9" 14.7"/6.1" 30 oz./850g 4B00HDZ $ 1,605.00 #100-008-672AK Mil-Dot 65E/45W/¼ 3.8" 15.9"/6.7" 34 oz./964g 4B00AVB $ 1,899.00 NXS 3.5-15x56mm #100-008-673AK NP-R1 65E/45W/¼ 3.8" 15.9"/6.7" 34 oz./964g 4B00HDZ $ 1,899.00 #100-008-674AK NP-R2 65E/45W/¼ 3.8" 15.9"/6.7" 34 oz./964g 4B00YTX $ 1,899.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE NXS 12-42x56mm #100-008-652AK NP-R2 110E/80W/¼ 3.87" 14.8"/5.8" 31 oz./879g 4B00HDZ $ 1,605.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. #100-008-653AK NP-R1 110E/80W/¼ 3.87" 14.8"/5.8" 31 oz./879g 4B00YTP $ 1,605.00 STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE #100-008-654AK NP-R1 110E/80W/¼ ZS 3.87" 14.8"/5.8" 31 oz./879g 4B00AVB $ 1,798.00 #100-008-614AK NP-2DD 45E/35W/¼ 3.8" 16.1"/6.9" 34 oz./964g 4B00HDZ $ 1,981.00 #100-008-655AK Mil-Dot 110E/80W/¼ 3.87" 14.8"/5.8" 31 oz./879g 4B00HDZ $ 1,605.00 #100-008-615AK Mil-Dot 45E/35W/¼ 3.8" 16.1"/6.9" 34 oz./964g 4B00YTP $ 1,981.00 #100-008-656AK Mil-Dot 110E/80W/¼ ZS 3.87" 14.8"/5.8" 31 oz./879g 4B00HDZ $ 1,263.00 #100-008-616AK NP-R2 45E/35W/¼ 3.8" 16.1"/6.9" 34 oz./964g 4B00AVB $ 1,981.00 NXS 5.5-22x50mm #100-008-617AK NP-R1 45E/35W/¼ 3.8" 16.1"/6.9" 34 oz./964g 4B00HDZ $ 1,981.00 ADJ. RANGE (MOA)/ EYE OAL/MOUNT. Benchrest Riflescopes STOCK # RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE ADJ. (MOA)/ EYE OAL/MOUNT. #100-008-657AK NP-R1 100E/60W/¼ 3.7" 15.1"/6.6" 31 oz./879g 4B00AVB $ 1,766.00 STOCK # MAG/OBJ. RETICLE CLICK VALUE RELIEF LENGTH WEIGHT PRICE 1 #100-008-658AK NP-R1 100E/60W/¼ ZS 3.7" 15.1" oz./6.6" 31 oz./879g 4B00HDZ $ 1,959.00 #100-008-626AK 8-32x56mm NP-2DD 50 MOA/ ⁄8 2.9" 16.6" oz./5.5" 36 oz./1,021g 4B00HDZ $ 1,286.00 1 #100-008-659AK MLR 100E/60W/.1 Mil ZS 3.7" 15.1"/6.6" 31 oz./879g 4B00YTP $ 2,044.00 #100-008-627AK 8-32x56mm NP-1RR 50 MOA/ ⁄8 2.9" 16.6" oz./5.5" 36 oz./1,021g 4B00YTP $ 1,286.00 1 #100-008-660AK MLR 100E/60W/¼ 3.7" 15.1"/6.6" 31 oz./879g 4B00AVB $ 1,766.00 #100-008-628AK 8-32x56mm NP-R2 50 MOA/ ⁄8 2.9" 16.6" oz./5.5" 36 oz./1,021g 4B00AVB $ 1,286.00 1 #100-008-661AK Mil-Dot 100E/60W/¼ 3.7" 15.1"/6.6" 31 oz./879g 4B00HDZ $ 1,766.00 #100-008-629AK 12-42x56mm NP-2DD 40 MOA/ ⁄8 2.9" 17" oz./5.9" 36 oz./1,021g 4B00HDZ $ 1,470.99 1 #100-008-662AK Mil-Dot 100E/60W/¼ ZS 3.7" 15.1"/6.6" 31 oz./879g 4B00YTP $ 1,959.00 #100-008-630AK 12-42x56mm NP-R2 40 MOA/ ⁄8 2.9" 17" oz./5.9" 36 oz./1,021g 4B00YTP $ 1,428.00 1 #100-008-663AK NP-R2 100E/60W/¼ 3.7" 15.1"/6.6" 31 oz./879g 4B00AVB $ 1,766.00 #100-008-631AK 12-42x56mm Mil-Dot 40 MOA/ ⁄8 2.9" 17" oz./5.9" 36 oz./1,021g 4B00AVB $ 1,263.00

order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 273 VORTEX MGM TARGETS Sinclair DEVTRON VIPER® PST SWITCHVIEW LEVER SCOPECOAT® TEPRO CTIVE COVER es 1-4x24 OFFSET SCOPE LEVEL ri RIFLESCOPES Enables Fast & Easy Changes In Cushion Your Optic From Dings, Scope Magnification Setting Helps Keep Your Crosshairs Level Bumps & Damage Dependable, With Every Shot Aluminum lever clamps around Nylon-faced, stretchy neoprene Precise Accuracy; Offset scope level helps position esso Variety Of Reticle Patterns & your scope’s magnification adjustment rubber cushions any rifle or pis- 2.5-10x44 ring and provides the extra leverage your crosshairs at a true level to re- tol scope from everyday bumps, Magnification Levels needed to quickly change magnifica- duce accuracy loss caused by holding scratches, dings, moisture, and dust. Snaps on and off quickly Variable-power “Precision tion settings. Easy to operate on the run and perfect for three- your rifle at a slightly different angle, without using rubber bands, clips, or strings. ab gun competition—use scope at low setting for close targets and or cant, each time you pull the trig- & acc Shooting Tactical” scopes are SPECS: Rubber, nylon facing, 2mm thick, black or brown camo. ger. Designed to let you view the level s built to deliver consistent crank quickly to higher magnification for distant targets. Models Order by size; recommended fit is either “relaxed same length” 4-16x50 available to fit Nightforce NXS, Burris XTR, and Leupold VX-III while still behind the scope. Attaches or slightly stretched. ic accuracy at extreme ranges to the scope tube like a scope ring. t in harsh environments and tactical scopes. Lever requires clearance between the scope body STK # BLACKSTK # CAMO SIZE p SPECS: Aluminum, anodized, matte Black or natural Silver finish. stressful situations. Water- and base or receiver rail for proper operation (listed below). ab 3 #268-101-001AK NA Mini - 5 ⁄4" x 20mm o SPECS: 6061 T6 aluminum, hardcoat anodized, black. Lever ex- Models available for scopes with 1" or 30mm O.D. tubes. proof, dustproof, shockproof, 1 7⁄ #100-008-564AK 1" Scope Level, Black 8H20A00 . . $ 28.95 #268-101-002AK NA Small - 8 ⁄2" x 20mm 6-24x50 argon-gas-purged scopes tends approximately 1 16" (3.7cm) from ring. Clearance required: #100-008-563AK 1" Scope Level, Silver, 1 are built on one-piece 30mm Nightforce NXS - .256" (6.5mm). Also fits Leupold Mark 6 and #268-101-003AK NA Medium - 10 ⁄2" x 30mm 8H21A72...... 28.95 1 tubes machined from aircraft- Vortex PST. Burris XTR - .260" (6.6mm). Also fits Euro Diamond, #268-101-004AK #268-102-004AK Large - 12 ⁄2" x 42mm #100-008-566AK 30mm Scope Level, Black, Mueller 8-32TD, and Bushnell Banner 3-9x. Leupold VX-III - .225" 1 grade 6061 T6 aluminum for #268-101-005AK NA Large 50 - 12 ⁄2" x 50mm optimum strength and rigidity. All models feature fully coated (5.7mm). Also fits Leupold Mark IV w/o Illumination, Mueller APV, 8H23A97...... 31.95 glass, with exterior lens surfaces protected with scratch-re- and Simmons AETEC 2.5-8x44. #100-008-565AK 30mm Scope Level, Silver, #268-000-014AK NA Large 52 - 14" x 52mm 8H21A30...... 31.95 1 sistant ArmorTek™ coating. Turret stops prevent turrets from #100-005-212AK Switchview Lever, Nightforce NXS, #268-101-006AK NA X-Large - 15 ⁄2" x 60mm traveling more than one revolution below the sight-in zero. Il- 1C54T82...... $ 59.95 #268-000-001AK NA Trijicon Reflex/C-More luminated reticles are glass etched, not wired, and are sand- #100-005-213AK Switchview, Burris XTR, 1C54T82. . 59.95 Serendipty #100-005-214AK Switchview Lever, Leupold VX-III, SCOPLEVEL wiched between two layers of glass. Ten illumination intensity #268-000-017AK NA Trijicon ACOG TA01NSN levels, with an “off” position between each setting, powered by 1C54T82...... 59.95 Don’t Let A Tilted Gun Ruin Accuracy #268-000-025AKNA Trijicon ACOG TA648 a single CR-2032 lithium battery (included). A variety of reticle Mount this fold-away level on your scope tube and patterns and features are available: EBR (Enhanced Battle Ri- #268-000-026AKNA Trijicon RMR MOUNTING SOLUTIONS be certain the crosshairs are as carefully aligned as fle) reticles feature subtension lines for ranging, holdover, and #268-000-013AK NA EOTech 511 they were when you sighted in. Just a slight amount windage corrections. MOA (Minute of Angle), with subtension ANTI-CANT DEVICE of tilt can throw a shot off-target and the longer the #268-000-018AKNA EOTech 516, 553 lines that equal approximately 1" at 100 yards, and MRAD (mil- range, the worse the error. The Scoplevel is visible #268-000-019AKNA EOTech 517, 557 liradian), with subtension lines that equal approximately 3.6" Stay On Target, Shot After Shot just above the reticle where your sighting eye can at 100 yards; TMCQ (Tactical Milling Close Quarters) hybrid #268-000-016AK NA EOTech 552 Gives an instant check to make sure the check it easily before every shot. ab reticle is designed for rapid, close- and mid-range shooting, with gun is perfectly level before pulling the trig- 3 #268-000-027AKNA EOTech 552 or 553 w/3x MOA or MRAD subtension lines. FFP (First Focal Plane) models SPECS: Black plastic. 3 ⁄4" (9.5cm) extended height. Mag Combo ger, so every shot goes where it’s aimed. When #782-100-100AK 1" Scoplevel 2H17P95...... $ 29.95 have MOA reticle lines that remain valid at all magnifications, a gun sighted in at 100 yards with the crosshairs level is canted #782-100-030AK 30mm Scoplevel 2H23P95...... 39.95 #268-000-029AKNA EOTech 557 w/3x Mag eliminating the need to recalculate holdover data. 1 just six degrees, point of impacts moves over ⁄2". Not much, but #268-000-028AKNA EOTech 557 w/4x Mag SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. enough to completely miss a small target—or wound a larger #268-000-022AKNA EOTech XPS 2/3 30mm O.D. tube, all models. Windage/elevation adjustment: ½ one. The problem gets worse at longer ranges. Clamp the ACD U.S. OPTICS BUBBLE LEVEL MOA on 1-4x24 models, ¼ MOA on all others. 1-4x24 – 9.7" (25cm) on the scope tube where it’s visible to the non-sighting eye. ab #268-000-020AKNA Aimpoint Micro Helps You Correct Weapon Cant long. 16 oz. (453g) wt. 2.5-10x44 – 12" (30.5cm) long. 18.4 oz. (522g) SPECS: Aluminum. Black (Blk) or silver (Sil), anodized, matte fin- #268-000-021AKNA Aimpoint CompM2/M3 wt. 4-16x50 – 13" (33cm) long. 22 oz. (624g) wt. 6-24x50 – 15.5" ish. Available for 1" or 30mm scopes. For Improved Accuracy — Advise # — Scopecoat 8F13C00...... $ 16.99 (39cm) long. 23 oz. (652g) wt. #556-200-100AK 1" Blk Anti-Cant Device 1K22B50. $ 29.95 #100-005-956AK 1-4x24 Viper Scope, TMCQ/MOA, Compact bubble level instantly XP-6 FLAK JACKET SCOPECOAT - Three times thicker (6mm) #556-200-101AK 1" Sil Anti-Cant Device 1K22B50 . . 29.95 displays the amount of tilt or 3B466Z65...... $ 499.95 #556-200-030AK 30mm Blk Anti-Cant Device, than the standard Scopecoat; gives extra protection for scopes #100-005-955AK 1-4x24 Viper Scope, TMCQ/MRAD, “cant” as you hold your rifle so you with tall adjustment turrets. Black only. 1K24B55...... 28.99 can make fast, easy corrections to improve accuracy. Installs on 3B466Z65...... 499.99 STOCK # DESCRIPTION SIZE PRICE #100-005-954AK 2.5-10x44 Viper Scope, EBR/MOA, either side of rail/optics to accommodate both left- and right- 3B559Z99...... 599.99 R&R TARGETS SCOPE TH ROW LEVERS hand shooters. Folds out-of-the-way when not in use, and a #268-106-004AK Large 12½" x 42mm 8F21C15 $ 24.99 #100-007-285AK 2.5-10x44 Viper Scope, EBR/MRAD, knurled aluminum cover threads over sighting bubble to protect #268-106-005AK Large 50 12½" x 50mm 8F16C50 $ 19.99 it. Rail Mount clamps to a MIL-STD 1913 Picatinny rail. Protec- 3B559Z99...... 599.99 Easy To Grasp Lever For Fast, #100-002-615AK Large 1452 14" x 52mm 8F17V50 $ 19.99 tive cover threads onto opposite side for storage when not in use. #100-005-953AK 4-16x50 Viper Scope, EBR/MOA, Precise Changes In Scope #268-106-006AK X-Large 15½" x 60mm 8F18C99 $ 22.99 3B653Z32...... 699.99 Magnification Setting Ring Mount clamps around 30mm optic tubes at eye level for #100-005-951AK 4-16x50 FFP Viper Scope, EBR/MOA, easy viewing with the non-shooting eye. Ring strap holds tight #268-106-001AK XX-Large 17½" x 60mm 8F22C15 $ 24.99 3B840Z00...... 899.99 Machined aluminum extension lever with two steel Allen head screws. #268-000-023AK IOR Valdada 8¼" x 60mm clamps over your variable-power scope’s SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Pitbull 8F18C00 $ 19.99 #100-007-284AK 4-16x50 Viper Scope, EBR/MRAD, 5 magnification adjustment ring to provide an oversized grasping Green liquid. Rail Mount - ⁄8" (1.6cm) long, 3¼" (8.3cm) wide open, 3B653Z32...... 699.99 7 5 #268-000-006AK Leupold CQ/T NA 8F15C75 $ 19.99 #100-007-282AK 4-16x50 FFP Viper Scope, EBR/MRAD, surface and extra leverage for fast, precise changes to magni- 1 ⁄8" (4.8cm) wide folded, ½" (1.3cm) high. Ring Mount - ⁄8" long, 11 #268-000-024AK ACOG TA01 w/ 6" x 60mm 3B840Z00...... 899.99 fication setting. Perfect for multi-gun competition shooters, as 4" (10.2cm) wide open, 2 ⁄16" (6.8cm) wide folded, ½" high. Fits well as military/law enforcement operators, who need to quickly 30mm optic tubes. RMR or Docter #100-005-952AK 6-24x50 Viper Scope, EBR/MOA, Reflex Sight 8F18C00 $ 19.99 3B699Z99...... 749.99 change scope settings for best accuracy. Over-engineered for #100-005-427AK Rail Mount Bubble Level, #100-005-950AK 6-24x50 FFP Viper Scope, EBR/MOA, strength and reliability, the clamp completely surrounds the 5F85B72...... $ 99.99 3B887Z50...... 949.99 scope’s adjustment ring and is secured with two, steel, hex-head #100-005-428AK Ring Mount Bubble Level WEAVER POLAR CAP screws for a full-contact, no-slip fit. ab 5F81B43...... 94.99 #100-007-283AK 6-24x50 Viper Scope, EBR/MRAD, P olarized Lenses Install Instantly, 3B699Z98...... 749.99 SPECS: Aluminum, anodized, matte black. Leupold Mark 4 fits #100-007-281AK 6-24x50 FFP Viper Scope, EBR/MRAD, non-illuminated Mark 4 models only. Trijicon AccuPoint fits Accu- Protect Your Scope Point scopes with 1.270" O.D. adjustment ring. Recent-production DVORAK SOFT-EYE 3B887Z00...... 949.99 Adjustable, see-thru caps reduce UV glare AccuPoints may require removal of adjustment ring’s rubber cover Protects Your Scope & Your Eye for proper fit. and distortion. Waterproof rubber housing #100-004-390AK Scope Throw Lever, Leupold Mark 4, Relieves eyestrain by eliminating slips on; spring-loaded, instant, thumbs-up B-SQUARE ab BUBBLE LEVEL 5B70A83...... $ 79.00 glare and view of peripheral movement. release. Includes yellow and gray lenses. Levels The Rifle, #100-004-391AK Scope Throw Lever, Trijicon AccuPoint, Soft bellows cushion eye against recoil. SPECS: Black, flexible rubber housing, plastic lens ring. Match O.D. 1 of ocular or objective lens to proper model in chart. Not The Scope 5B70A83...... 79.00 SPECS: Vulcanized rubber. Black. 4 ⁄2" (11.4cm) long. Fits ocular ring dia. - 34mm; 34-37mm, 37mm: 37-40mm, 40mm: 40-43mm, STOCK # SIZE O.D. RANGE STOCK # SIZE O.D. RANGE Improves accuracy by en- 43mm; 43-47mm. #955-715-010AK G 1.50"-1.54" #955-717-610AK M 1.76"-1.83" suring the rifle is level before each shot. Even the smallest so you can quickly check the level without moving your eye off #520-100-034AK 34mm Soft-Eye 2E11Z30...... $ 14.99 1 #955-715-510AK H 1.55"-1.60" #955-718-410AK N 1.84"-1.95" amount of cant will move bullet strike ⁄2 an inch or more at the target. Fits Weaver-style base. #520-100-037AK 37mm Soft-Eye 2E15Z14...... 18.99 100 yards: results in missed targets or wounded game. Attaches SPECS: Aluminum, black, anodized finish. 1.8" (47mm) long. #520-100-040AK 40mm Soft-Eye 2E15Z60...... 19.99 #955-716-710AK K 1.65"-1.75" #955-719-610AK P 1.96"-2.09" directly to a scope base, remains visible to your non-sighting eye #122-100-600AK Bubble Level 6K13Z50 ...... $ 15.99 #520-100-043AK 43mm Soft-Eye 2E11Z50...... 14.99 — Advise # — Polar Cap 5E11D98...... $ 13.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 274 SINCE 1939 Office/Tech: 641-623-5401 BUTLER CREEK BUTLER CREEK o

FLIP OPEN SCOPE COVERS BLIZZARD SCOPE COVER p t

Keeps Harmful Debris From Clear, See-Thru Caps Flip Open ic

Introduction to Night Vision s Scratching Or Abusing Lenses With Just A Touch & acc Weatherproof, dust-proof, Spring-loaded, flip-open scope covers allow moisture-proof scope covers pro- fast, thru-the-scope sighting for quick shots. tect your scope’s lenses from be- Impact resistant, polymer lenses keep your scope lens dry, clear Night vision devices (NVD) gather ambient light through the front lens, multiply it, and display the ing damaged during tactical and hunting situations. Cover flips and ready during inclement weather. esso open easily with finger pressure to spring up, and out of the way. SPECS: Black, flexible plastic housing, clear polymer lenses. Mea- image through the eyepiece – typically with a green tint or in black and white. NVDs are classified by Eye and Objective covers sold separately. sure O.D. of scope lens housing, match to sizes shown in chart that their “generation” of development. Generation 1 devices multiply available light by approximately SPECS: Polycarbonate, black, matte, finish. Select the cover that fit either the ocular or objective end of the scope. Includes stick-on, most closely matches the diameters of the Eye and Objective bells silencer foam block. 1,000 times. Generation 2 devices multiply light by approximately 20,000 times. Generation 2 also ri within .01" (.25mm) undersize and .025 (.64mm) oversize. #15 eye STOCK # SIZE O.D. RANGE STOCK # SIZE O.D. RANGE es fits Redfield Widefield eyepiece. includes Commercial Grade Tubes (CGT) and High-Performance Tubes (HPT); both increase the reso- #120-250-001AK #1 1.0" - 1.05" #120-250-006AK #6 1.7" - 1.79" STOCK # MFR # STYLE SIZE PRICE lution and tube life as compared to standard Gen 2 technology. Another variant of Gen 2 is White #120-250-002AK #2 1.3" - 1.39" #120-250-007AK #7 1.8" - 1.89" #120-000-039AK 01 Eye 1.341" 3E08Y49 $ 9.99 #120-250-003AK #3 1.4" - 1.49" #120-250-008AK #8 1.9" - 1.99" Phosphor Technology (WPT), which displays the image in black and white for better contrast and #593-000-154AK 02 Eye 1.225" 3E08B49 $ 9.99 #120-250-004AK #4 1.5" - 1.59" #120-250-009AK #9 2.0" - 2.1" resolution. Generation 3 devices – currently used by the U.S. Military – multiply existing light by #120-000-040AK 03 Eye 1.388" 3E08Y49 $ 9.99 #120-250-005AK #5 1.6" - 1.69" #120-250-010AK #10 2.3" - 2.4" approximately 50,000 times. Gen 3 also includes “Generation 3A” optics that are an improvement in #593-000-155AK 03A Eye 1.3" 3E08B49 $ 9.99 #120-250-011AK # 11 2.43" - 2.5" #120-000-041AK 05 Eye 1.432" 3E08Y49 $ 9.99 — Advise # — Blizzard Scope Cover 3E07P75 . . . $ 8.99 resolution over standard Gen 3 systems. Generation 4 – an ATN innovation – uses proprietary, state- #593-000-156AK 07 Eye 1.457" 3E08B49 $ 9.99 of-the-art technology that enables greater target detection range, higher resolution, and reduces the #120-000-038AK 09 Eye 1.468" 3E08Y49 $ 9.99 ELITE DISTRIBUTORS LENSPEN “halo” effect created by street lights, vehicle lights, and similar light sources. #120-000-023AK 09A Eye 1.485" 3E08Y49 $ 9.99 #120-000-012AK 10 Eye 1.516" 3E08Y49 $ 9.99 Clean Scope Lenses Without Surface Damage #120-000-011AK 11 Eye 1.55" 3E08Y49 $ 9.99 #120-000-014AK 13 Eye 1.570" 3E08Y49 $ 9.99 Pocket sized cleaning pen fea- ATN ARIES MK tures a unique circular tip with #120-000-015AK 14 Eye 1.605" 3E08Y49 $ 9.99 special cleaning compound that leaves the lens spotless without NIGHT VISION WEAPON SIGHTS #120-000-037AK 15 Eye 1.66"x1.45" 3E08Y49 $ 9.99 red cross-hair reticle adjusts in precise ¼ MOA increments to damaging the lens surface or coating. Includes a retractable Gen 1+ Night Vision Sights ensure accurate shots on targets out to 200 yards under full #120-000-013AK 16 Eye 1.660" 3E08Y49 $ 9.99 brush for removing loose particles, plus a flexible tip that eas- Ideal For Law Enforcement, moonlight conditions. The detachable 450mW infrared illumi- #120-000-016AK 17 Eye 1.675" 3E08Y49 $ 9.99 ily bends to match the contour of the lens and reach into the nator increases light to enable better target identification when tightest corners for complete removal of stubborn debris. Air Military or Hunting #120-000-017AK 18 Eye 1.700" 3E08Y49 $ 9.99 Applications ambient light is at a minimum. Easy-to-operate controls make tight cover prevents the cleaning tip from drying out, plus auto- this water- and fog-resistant unit very user-friendly. Attaches to #120-000-025AK 19 Eye 1.730" 3E08Y49 $ 9.99 matically replenishes it with cleaning compound each time it’s Rugged night vision weapon Picatinny or Weaver-style rails. Models available with 2.5x, 4x, #120-000-024AK 20 Eye 1.775" 3E08Y49 $ 9.99 installed. Environmentally safe. MiniPro is specially designed sight is ideal for nighttime and 5x magnification levels. to fit smaller optical lenses. Recommended for lenses between #593-000-157AK 21 Eye 1.7"x1.42" 3E00BXC $ 10.95 law enforcement, military or SPECS: Aluminum, hardcoat anodized, matte black. Mounts to 7mm - 13mm in diameter. Lenspen is recommended for lenses #120-000-048AK 01 Objective 1.00" 3E08Y49 $ 9.99 hunting applications. Fully Picatinny or Weaver-style rails. Battery life: approximately 40 hrs. 13mm diameter and larger. multicoated optics combine with ATN’s high-resolution Gen- Operating temperature range: -59°to 113°F (-51 to 45°C). Water #120-000-050AK 02A Objective 1.181" 3E08Y49 $ 9.99 SPECS: Housing - Polymer, black or silver. Brush - Natural bristles. 15 11 eration 1+ image intensifier tube to amplify ambient light by and fog resistant. Includes (2) CR-123 batteries, IR450 illuminator, #120-000-056AK 02 Objective 1.225" 3E08Y49 $ 9.99 LensPen - 4 ⁄16" (12.5cm) long x ⁄16" (1.7cm) dia. Tip - ½" (13mm) 11 5 approximately 1,000 times. Brightness-adjustable, green-on- mounting tools, carry bag, and instructions. #593-000-124AK 03A Objective 1.3" 3E08U49 $ 9.99 dia. MiniPro - 3½" (9.1cm) long x ⁄16" (11mm) dia. Tip - ⁄16" (7.9mm) dia. #593-000-125AK 03 Objective. 1.34" 3E08U49 $ 9.99 Dimensions #100-003-512AK LensPen, Black 9B10D95. . . . . $ 14.95 STOCK # MODEL GEN. MAGNIF. RESOLUTION FOV LxWxH Weight PRICE #593-000-126AK 04 Objective. 1.095" 3E08U49 $ 9.99 #100-003-513AK MiniPro, Silver 9B10D95...... 14.95 n i

#593-000-127AK 05 Objective. 1.387" 3E08U49 $ 9.99 #100-010-903AK MK350 1+ 2.5x 40 lp/mm 14° 11.5" x 3.2" x 4.1" 2.8lbs/1.3kg 2H00PUA $ 449.00 ght #593-000-128AK 07 Objective 1.429" 3E08U49 $ 9.99 OTIS LENS CLEANING KIT #100-010-904AK MK390 1+ 4x 40 lp/mm 12° 11.5" x 3.3" x 4.1" 3.2lbs/1.5kg 2H00BXC $ 549.00 #120-000-053AK 09 Objective 1.485" 3E08Y49 $ 9.99 #100-010-905AK MK410 1+ 5x 40 lp/mm 10° 11.5" x 3.6" x 4.3" 3.7lbs/1.7kg 2H00DZA $ 629.00

Helps Keep All Your v

#120-000-045AK 10 Objective 1.50" 3E08Y49 $ 9.99 i Optics Clean & Fog-Free s

#593-000-129AK 11 Objective 1.54"x1.34" 3E08U49 $ 9.99 i ATN on #593-000-130AK 12 Objective 1.76"x1.53" 3E00UAV $ 10.95 All-in-one kit helps NIGHT ARR OW you protect and preserve #120-000-042AK 13 Objective 1.530" and automatic brightness control makes this weather-resistant 3E08Y49 $ 9.99 the functionality of your NIGHT VISION WEAPON SIGHT #120-000-027AK 15 Objective 1.558" 3E08Y49 $ 9.99 unit easy and straightforward to use. Detachable 450mW infra- optics, so you can see the Weapon-Mounted red illuminator provides additional illumination for a higher- #120-000-054AK 17 Objective 1.612" 3E08Y49 $ 9.99 target clearly. Includes NVD Delivers contrast image when ambient light is at a minimum. Attaches #120-000-049AK 19 Objective 1.646" 3E08Y49 $ 9.99 the necessary components to remove oil, dirt, and dust from Superb Nighttime easily and quickly to Picatinny or Weaver-style rails. Available glass and optics-grade carbonate, leaving it resistant to fogging in 2x, 4x, or 6x magnifications with a choice of Standard Gen #120-000-055AK 20 Objective 1.70" 3E08Y49 $ 9.99 and further dust contamination. Use to clean lenses on scopes, Observation & Sighting #120-000-052AK 21 Objective 1.735" 3E08Y49 $ 9.99 2 tube or Gen 2 CGT tube. Ships directly from manufacturer . rangefinders, laser sighting devices, binoculars, cameras, and High-performance night vi- Please allow 5 additional business days for shipping . #120-000-051AK 23 Objective 1.760" 3E08Y49 $ 9.99 eyeglasses without damage or scratching. ab sion weapon sight allows you SPECS: Molded hard-polymer, black. 11" (28cm) long x 4.1" #120-000-043AK 25 Objective 1.80" 3E08Y49 $ 9.99 SPECS: Kit contents: ½ fl. oz. (14 ml) of lens cleaner, mohair lens spot and sight targets that (10.3cm) wide x 3.7" (9.3cm) tall. 3.1 lbs (1.4kg) wt. Fits Picatinny brush, anti-fog lens swabs, lens tissues, and lens cleaning cloth. #120-000-018AK 26 Objective 1.82" 3E08Y49 $ 9.99 would otherwise be concealed and Weaver-style rails. Photocathode type: Multi-Alkali. Green dis- #668-000-097AK Lens Cleaning Kit 8F10C16. . . . $12.99 by darkness. ATN’s “Red-On-Green” reticle with illuminated red #120-000-019AK 27 Objective 1.84" 3E08Y49 $ 9.99 play. Focus: 10m to infinity. 30 hour battery life. Water/fog resistant. center dot provides a clear aiming reference for targets out to Operating temp. range: -40° to 122°F (-40° to 50°C). Uses (1) AA #120-000-021AK 28 Objective 1.89" 3E08Y49 $ 9.99 approximately 300 yards in full moonlight. One-knob operation battery. Comes with IR450 illuminator, carry case, and instructions. #120-000-047AK 29 Objective 1.919" 3E08Y49 $ 9.99 #593-000-131AK 45 Objective 2.41" 3E08X49 $ 9.99 #120-000-022AK 30 Objective 1.96" 3E08Y49 $ 9.99 #120-000-028AK 46 Objective 2.430" 3E08Y49 $ 9.99 STOCK # MODEL GEN. MAGNIF. RESOLUTION ADJUSTMENTS FOV TUBE LIFE PRICE #120-000-046AK 31 Objective 1.998" 3E08Y49 $ 9.99 #593-000-132AK 47 Objective 2.461" 3E08X49 $ 9.99 #100-010-948AK Night Arrow 2-2 2 2x 40-45 lp/mm ½ MOA 17° 5,000 hrs 2H1320T00 $ 1,349.00 #120-000-030AK 33 Objective 2.043" 3E08Y49 $ 9.99 #593-000-133AK 48 Objective 2.5" 3E08X49 $ 9.99 #100-010-949AK Night Arrow 2-CGT 2 (CGT) 2x 45-54 lp/mm ½ MOA 17° 10,000 hrs 2H1440T00 $ 1,499.00 #120-000-026AK 34 Objective 2.100" 3E08Y49 $ 9.99 #593-000-134AK 51 Objective 2.575" 3E08X49 $ 9.99 #100-010-950AK Night Arrow 4-2 2 4x 40-45 lp/mm ¼ MOA 7.5° 5,000 hrs 2H1405T00 $ 1,449.00 #120-000-044AK 39 Objective 2.220" 3E08Y49 $ 9.99 #593-000-136AK 53 Objective 2.6" 3E00ZAY $ 10.95 #100-010-951AK Night Arrow 4-CGT 2 (CGT) 4x 45-54 lp/mm ¼ MOA 7.5° 10,000 hrs 2H1525T00 $ 1,599.00 1 #120-000-029AK 40 Objective 2.250" 3E08Y49 $ 9.99 #593-000-135AK 53A Objective 2.640" 3E00XCH $ 10.95 #100-010-952AK Night Arrow 6-2 2 6x 40-45 lp/mm ⁄6 MOA 5° 5,000 hrs 2H1490T00 $ 1,549.00 1 #120-000-020AK 43 Objective 2.31" 3E08Y49 $ 9.99 #593-000-137AK 54 Objective 2.75" 3E00PUA $ 10.95 #100-010-953AK Night Arrow 6-CGT 2 (CGT) 6x 45-54 lp/mm ⁄6 MOA 5° 10,000 hrs 2H1610T00 $ 1,699.00

order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 275