DOCSLIB.ORG

Florida Sheriffs Association & Florida Association Of

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Florida Sheriffs Association & Florida Association Of FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Unit Name of Dealership Type of Vehicle Zone Price THREE WHEELED UTILITY VEHICLE, WITH ENCLOSED CAB (Specification #21) WBG Enterprises, LLC 2015 Westward GO4 Western $24,452.50 WBG Enterprises, LLC 2015 Westward GO4 Northern $24,352.50 WBG Enterprises, LLC 2015 Westward GO4 Central $24,252.50 WBG Enterprises, LLC 2015 Westward GO4 Southern $24,252.50 FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES THREE WHEELED UTILITY VEHICLE, WITH ENCLOSED CAB SPECIFICATION #21 2015 Westward GO4 ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED INSTRUCTIONS: Listed above, you will find the model numbers of the vehicles that will be included in this year’s contract. All items factory installed unless otherwise indicated. INSTRUCTIONS: You will find the model numbers of the vehicles that will be included in this years contract. 1. ENGINE: a. 69 HP 4 cycle b. Electronically fuel injected c. 9 gallon fuel tank 2. TRANSMISSION: a. 4 speed automatic b. Transaxle type c. Transmission Cooler 3. BRAKES: a. Hydraulic brakes on all 3 wheels b. Parking brake 4. PERFORMANCE: a. 45 MPH top speed b. Street legal for operation for street use 5. DIMENSIONS APPROXIMATE: a. 69" Overall Height With Cab b. 118" Overall Length c. 53" Overall Width d. 114" Outside Turning Radius e. 79" Wheel Base 6. CHASSIS AND BODY: a. Tubular steel frame b. Aluminum and plastic body construction c. Metal swing type cab doors d. Rear independent suspension e. Front leading link type syspension f. Storage box with lockable cover g. GVWR 2235 lbs. h. Steel front and rear bumpers 7. TIRES AND WHEELS: a. 165/50 14" Tires b. Radial all season tread 8. COMFORT ITEMS: a. Single passenger seat, adjustable with headrest b. Rubber floor mats c. Heater, defroster and air conditioning d. Gauges - speedometer, fuel level, and hour meter e. Indicator lights for oil pressure, engine temperature, and charging system f. Adjustable tilt wheel 9. SAFETY ITEMS: a. 3 point seat belt b. Intermittent windshield wipers with washer c. Headlights, stoplights,turn signals d. Side marker lights e. Horn f. Dome light g. Lateral thrust indicator 10. PERFORMANCE: a. 45 mph top speed b. Street legal for operation for street use 11. DIMENSIONS APPROXIMATE: a. 69" Overall height with cab b. 118" Overall length c. 53" Overall width d. 114" Outside turning radius e. 79" Wheel base FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES THREE WHEELED UTILITY VEHICLE, WITH ENCLOSED CAB SPECIFICATION #21 2015 Westward GO4 The Westward GO4 purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by specification by zone. ZONE: Western Northern Central Southern BASE PRICE: $24,452.50 $24,352.50 $24,252.50 $24,252.50 While the Florida Sheriffs Association and Florida Association of Counties have attempted to identify and include those equipment items most often requested by participating agencies for full size vehicles, we realize equipment needs and preferences are going to vary from agency to agency. In an effort to incorporate flexibility into our program, we have created specific add/delete options which allow the purchaser to tailor the vehicle to their particular wants or needs. The following equipment delete and add options and their related cost are provided here to assist you in approximating the total cost of the type vehicle(s) you wish to order through this program. Simply deduct the cost of any of the following equipment items you wish deleted from the base unit cost and/or add the cost of any equipment items you wish added to the base unit cost to determine the approximate cost of the type vehicle(s) you wish to order. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate dealer in your zone when preparing your order. Additional add/delete options other than those listed here may be available through the dealers, however, those listed here must be honored by the dealers in your zone at the stated prices. VEHICLE: GO4 DEALER: WBG Enterprises, LLC WBG Enterprises, LLC WBG Enterprises, LLC WBG Enterprises, LLC ZONE: Western Northern Central Southern BASE PRICE: $24,452.50 $24,352.50 $24,252.50 $24,252.50 Order Code Delete Options All Zones Specify - NA Specify - NA Specify - NA Specify - NA Specify - NA Order Code Add Options All Zones 200-2000 1 Air conditioning $2,453.101 213-400 1 Sliding rear window $278.601 1-96-004 1 Padded Arm Rest (with storage box) $249.201 1-96-024 1 Extra set of keys $15.461 1-96-035 1 Grab Handles $89.601 1-96-039 1 Radio with CD Player $453.601 1-96-039 1 Back up Alarm $145.601 1-96-020 1 Jack and lug Wrench $189.001 1-86-114-01 1 Nerf bar (front bumper) $347.201 6-86-130-1 1 Nerf bar (rear bumper) $347.201 1-50-003 1 Replacement Tire and Wheel $198.801 1-96-017 1 3 piece Triangle Reflector Kit $68.601 6-86-120-2 1 Light bar (for separate beacon attachment) $273.001 Please specify - NA Please specify - NA Please specify - NA Please specify - NA Please specify - NA .
Load more

Recommended publications
  • Causarano 8 Feature When They Know Back Home Again
    The newsletter of the San Diego Miata Club Volume 11 Number 10 October 2006 Film and food critiqued at Santee Drive-in LES SMITH y Heavens, treat. man, who played the Ger‐ where’s a movie Upon entering the man whore, and other M critic when you drive‐in, we promptly cast members. For exam‐ need one? David Elliott, violated the prominently‐ ple, “If you can drink film critic of the San Diego posted rule about remain‐ ram’s piss, you can drink Union‐Tribune, must have ing in your vehicle; our anything.” (An SDMC What’s Inside? had a crush week to have row of folding chairs and twist on this could be, “If Officers & Contacts 2 overlooked “Beerfest,” coolers stretched a good you can drive a yellow playing at the Santee 20–25 yards in front of Miata, you might drive Membership Info 3 Drive‐In the weekend of our vehicles. Yet, one anything.”) President’s Message 4 the “Debbye Does the could argue that the I think I’ve written Editor’s Column 5 Drive‐In” run. And, while Miata is quite inappropri‐ enough about the movie, I’m on a roll, why don’t ate for drive‐in movies, other than admitting to Coming Events 6-7 those drive‐in managers other than for getting two glancing over my shoul‐ Viewpoints 7 consult us in selecting a people there and then der occasionally at scenes Sal Causarano 8 feature when they know back home again. (I did of the animated feature Obituary run leaders Bruce and not see one teenage cou‐ “Barnyard” playing on Debbye Lewis are going ple there in a Miata.) the opposite screen.
    [Show full text]
  • Wavebid > Buyers Guide
    Lot Title Description Thumbnail Number IMPORTANT NOTICE FOR MISSOURI CITY AUCTION: All purchases will be subject to a 14% buyer's premium. There Will Be A 3% Administrative Fee For Purchases Not Made By Cash, Cashier's Check, Money Order, Wire Transfer or Direct Deposit.** *Social distancing will be enforced *Customers will not be allowed inside to use the restrooms. No Exceptions! *Please schedule an appointment prior to removal. Customers may be turned away without an appointment scheduled. *We recommend wearing gloves and face mask for personal safety and health while on auction location. Preview: (By Appointment Only-Mandatory-No Exceptions) Tuesday, June 30, 2020 (Hours Of Operation: 8:00 a.m. - 11:00 a.m./1:00 p.m. - 3:00 p.m.) Location 1: (Lots 1-39) Fleet Services, 1919 Scanlin Rd., Missouri City, Tx 77489 Driving Directions. Removal: (By Appointment Only-Mandatory-No Exceptions) Monday, July 6, 2020 /Tuesday, July 7, 2020/Wednesday, July 8, 2020 (Hours Of Operation: 8:00 a.m. - 11: 00 a.m./1:00 p.m. - 3:00 p.m.) Preview & Removal Contact: Fleet Superintendent, Mike Tubbs or Shop Forman, Hung Hoang, (281)403-8583 Winning Bidder Is Responsible For Bringing Own Batteries, Equipment, Etc. To Get Vehicle Started And/Or Removed. Forklift Available For Removal. Forklift Available For Removal. Preview & 0 Removal There Will Be A $35.00 Title Preparation Fee Added To The Buyers Total For Each Unit Information Purchased. **All defects and flaws with a vehicle will be the buyers responsibility once purchased by buyer. Buyer should be aware that they are purchasing a used vehicle as it sits on the auction location with No warranty or Guarantee Whatsoever.
    [Show full text]
  • Posi-Lok Ignition and Fuel Products Tonneau Covers
    4X4 Posi-Lok PSL POSI-LOK IGNITION AND FUEL Accel APG PRODUCTS Access Bed Covers ACC TONNEAU COVERS Accra ACR RUNNING BOARDS Addictive Desert ADD BUMPERS AND ACCESSORIES Adjust-A-Brush ADJ RV CLEANING BRUSHES TRANSMISSION CONVERSION Advance Adapters, Inc AAD ADAPTERS ACCESSORY CONTROL Advanced Accessory Concepts ACO SYSTEMS Advanced Clutch ACT CLUTCH KITS Advanced Engineering AEG TOWING/RV PRODUCTS Advantage Truck Accessories TRZ FOLDING TONNEAU COVERS PERFORMANCE AEM Performance Electronics AEP ELECTRONICS FIBERGLASS RUNNING Aero-Tec ARO BOARDS Aeromotive AEO FUEL, OIL, AND AIR SYSTEMS Aeroquip/Eaton AER HOSE & FITTINGS PERFORMANCE AIR aFe Power AFE INTAKES/FILTERS/EXHAUST PRODUCTS ADJUSTABLE AIR HELPER Air Lift Company ALC SPRINGS AIR SUSPENSION Air Ride Technologies (Ride Tech) RID COMPONENTS THROTTLE BODY SPACERS & Airaid AIR AIR INTAKES Airbedz ABZ TRUCK BED AIR MATTRESSES AirDog / Diesel Rx ADG AIRDOG FUEL PREPORATOR Al's Liner ASC BED PROTECTION PRODUCTS BILLET ACCESSORIES, 3RD All Sales ALS BRAKE COVERS, FUEL DOORS CHASSIS KITS,CAGES, AND Alston Race Cars ARC ROLL BARS REFUELING AND TRANSFER Aluminum Tank Industries, Inc. ATI TANKS American Brass AMB RV FAUCETS American Force Wheels AFW WHEELS American Racing Wheels ARW WHEELS American Trail Products ATP JEEP ACCESSORIES POWER STEPS, BEDSTEPS, Amp Research AMP AND BED EXTENDERS Amp Tires AMT TIRES EXHAUST PRODUCTS, Ansa Automotive ANS MUFFLERS & CATALYTIC CONVERTERS Anzo, Usa ANZ PERFORMANCE LIGHTING EXHAUST PRODUCTS, AP Exhaust Products APE MUFFLERS & CATALYTIC CONVERTERS TOWING/RV AP Products APP PRODUCTS/REPLACEMENT PARTS MANUFACTURER OF HIGH ARB Usa/Old Man Emu ARB QUALITY 4X4 ACCESSORIES Arc Lighting ARL REPLACEMENT LIGHTING Archoil ARH FUEL SYSTEM CLEANER Area Diesel Service, Inc ARE PUMPS, INJECTORS, TURBOS GRILLE GUARDS, NERF BARS, Aries ARI BULLBARS, WINCH MOUNTS ARP, Inc.
    [Show full text]
  • 2021 Rule Book
    Table of Contents General Rules Page 2 Safety Rules: Page 23 PRO-LITE: Page 28 PRO2: 67 PRO4: 99 SXS Classes: 125 MORR Combine Class: Page 146 MORR Buggy: Page 158 MORR Light Buggy: Page 163 MORR Mod Kart: 170 MORR Short Course Kart: Page 174 MORR Stock Truck: Page 180 MORR Pro Buggy: Page 185 MORR Super Stock Truck: Page 187 CHAMP OFF-ROAD GENERAL RULES SECTION 1 – RULE BOOK • Effective Date – The CHAMP OFF-ROAD rules are effective upon the date of publication regardless of when a competitor receives actual notice. • Amendment – CHAMP OFF-ROAD rules may be amended or changed by written notice from CHAMP OFF-ROAD headquarters at any time. The amendment/change is also effective upon the date of publication. • Interpretation and Application – If there is a disagreement regarding the meaning or application of the CHAMP OFF-ROAD rules, the interpretation and application by the CHAMP OFF-ROAD officials at the event shall prevail. This decision is final and non- appealable. • Finality of Interpretation and Application – All participants, including but not necessarily limited to competitors, team owners, sponsors and officials, expressly agree that determinations by CHAMP OFF-ROAD officials as to the application and interpretation of the rules are non-litigable, and covenant that they will not initiate or maintain litigation of any kind against CHAMP OFF-ROAD or anyone acting on its behalf with respect to such determinations, unless it is determined that the CHAMP OFF-ROAD officials made such determinations for no other purpose other than a bad faith intent to harm or cause economic loss to the participant or official.
    [Show full text]
  • Diesel Fuel Quality Requirements for India
    Vehicle Body Engineering BY JDK Vehicle Body Engineering Introduction : Basic Feature of an Automobile • Progress of civilization is intimately connected with the means of transportation • A self-propelled vehicle used for transportation of goods & passengers on land is called Automobile or Automotive/Motor Vehicle • An automobile is comprised of a chassis & a body • Chassis is made up of a frame supporting ; body / power unit / transmission system / control system Vehicle Body Engineering Introduction : Basic Feature of an Automobile • A chassis frame is supported by wheels & tyres through suspension system and axles • The power delivered by power unit ( engine ) is transmitted through clutch or fluid coupling, transmission system, and axle to the wheels • Automobile is propelled on road due to friction between the tyre and road surface • Various sub - systems of the automobile are properly designed & held together for efficient functioning individually & as well as whole unit Vehicle Body Engineering Introduction : Basic Feature of an Automobile • The body and suspension provides protection & comfort • Automobile has its limitations in regard to load, speed & distance it can travel Vehicle Body Engineering Course Outlines BADE- 503 LTP-3 1 0 I: Car Body Details II: Vehicle Aerodynamics III: Bus Body Details IV: Commercial Vehicle Details V: Body Materials, Trim & Mechanisms Vehicle Body Engineering General Classification of Automobiles Automobiles can be classified from various point of view of considerations like ; • Use : Motorcycle, car, Bus, … • Capacity : HTV,LTV, … • Make : Maruti, Honda, Bajaj, … • Model : Zen, • Fuel : Petrol, Diesel, CNG, … • Wheels : Two, three, four, ... • Drive : Left hand drive, Front wheel drive, ... Vehicle Body Engineering General Classification of Automobiles • Transmission : Conventional, Automatic … • Construction : a) Unitized body construction - Various body sections are used as structural strength member to help support & stiffen the entire unit - All sections are welded together to form an unit.
    [Show full text]
  • Genuine Accessories Front and Rear Bumpers and Nerf Bars Provide Increased Protection from Trail Obstacles While Contributing to the KRX1000’S Aggressive Styling
    2021 SIDE x SIDE The Teryx KRX®1000 is the ultimate Kawasaki sport side by side, offering unmatched capability in challenging and technical off-road terrain, high performance, and Kawasaki-engineered durability from the ground up to provide the ultimate off-road experience. And with the addition of two new models with factory-equipped accessories and special colors and graphics, there’s now three Teryx KRX1000 models for adventure enthusiasts to choose from. COLORS KEY FEATURES • COMPACT LITER-CLASS PARALLEL TWIN ENGINE DELIVERS BOTH HIGH POWER AND ROBUST LOW-END TORQUE • CVT WITH CENTRIFUGAL CLUTCH PROVIDES SMOOTH ACCELERATION AND AIDS PRECISE THROTTLE CONTROL • LONG WHEELBASE AND LONG-TRAVEL SUSPENSION FEATURING FOX 2.5 PODIUM LSC SHOCKS COMBINE FOR EXCELLENT PERFORMANCE AND RIDE COMFORT • ON-THE-FLY ELECTRICALLY SELECTABLE 4WD AND FRONT DIFFERENTIAL LOCK • LARGE REAR CARGO AREA FOR SPARE TIRE OR OTHER LARGE ITEMS • ROOMY INTERIOR WITH ADJUSTABLE HIGH-BACKED BUCKET SEATS • SPEED-SENSITIVE ELECTRIC POWER STEERING SPECIFICATIONS KRF1000AMFNN/BMFMM/CMFNN Engine Type Liquid-Cooled, 4-Stroke Parallel Twin, DOHC, 4-Valves per Cylinder Displacement 999 cc Bore & Stroke 92.0 x 75.1 mm Maximum Torque 76.7 lb-ft @ 7,000 rpm Compression Ratio 11:5:1 Fuel System DFI® with Two 50mm ETV Throttle Bodies Transmission/Drive System CVT w/Centrifugal Clutch, Dual Range H/L/N/R, 2WD/4WD, Shaft Drive Front Tire Type/Size Maxxis Carnivore 31 x 10.00R15 8PR, Bead-lock Wheels Rear Tire Type/Size Maxxis Carnivore 31 x 10.00R15 8PR, Bead-lock Wheels Wheelbase
    [Show full text]
  • SCCA® National Solo® Rules
    SCCA® National Solo® Rules 2020 EDITION Sports Car Club of America® Solo® Department 6620 SE Dwight St. Topeka, KS 66619 (800) 770-2055 (785) 232-7228 Fax www.scca.com Copyright 2020 by the Sports Car Club of America, Inc®. All rights re- served. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage or retrieval system, without the prior written permission of the publisher. Forty-seventh printing, January, 2020. Published by: Sports Car Club of America, Inc.® 6620 SE Dwight St. Topeka, KS 66619 www.scca.com 1-800-770-2055 (785) 357-7222 The SCCA® National Solo® Rules may be downloaded from the SCCA® website at www.scca.com. Published in the United States of America. This book is the property of: Name _____________________________________________ Address ____________________________________________ City/State/Zip ________________________________________ Region _____________________________________________ Member # __________________________________________ SCCA Welcoming Environment Statement The Mission of the SCCA is to fuel a safe, fun and excit- ing motorsports experience for auto enthusiasts. Our Vision is to be the preferred motorsports community in the U.S., built on fun, shared passion and access to an exhilarating motorsports experience. In all its activities, the SCCA seeks to foster an atmosphere that encourages living the Values of the SCCA: Excellence – The Spirit of a Competitor Service – The Heart of a Volunteer Passion – The Attitude of an Enthusiast Team – The Art of Working Together Experience – The Act of Wowing our Community Stewardship – The Mindset of an Owner To that end, the SCCA strives to ensure that ALL partici- pants in its events and activities enjoy a welcoming en- vironment.
    [Show full text]
  • Technical Specifications: Sprint Car
    TECHNICAL SPECIFICATIONS: SPRINT CAR CHASSIS Car must resemble a “World of Outlaws” or “USAC” Sprint Car and meet all dimensional specifications as shown below: WEIGHT: 22 pounds minimum (empty fuel tank). SUSPENSION & DRIVETRAIN All cars must be straight axle, front and rear. This is to mean no independent suspension. Suspension may be Coil Over and/or Torsion Bar. Maximum of (4) shock absorbers. Rear End Differentials (ball diffs, floater hubs) are allowed but not required. Quick Change Gear Rear Ends (Skellenger, New Era, etc.) are allowed but not required. BODY & WINGS A scale appearing hood, tail tank, and top wing are required. Front wing is optional. Top wing must be mounted so that the bottom surface of the top wing (point closest to the top of the cage) is a minimum of 1.50” above the roll cage. No side foils, rudders, or panels are to extend beyond rear cage support bars. Wings may be constructed of any material but must be flexible with no sharp edges. Wings must meet all dimensional specifications as shown below: TOP WING TOP VIEW 14.00" 16.00" MAX. MAX. SIDE VIEW FRONT VIEW 7.00" 7.00" MAX. MAX. 18.00" MAX. 14.00" MAX. FRONT WING TOP VIEW 8.00" 6.00" MAX. MAX. SIDE VIEW FRONT VIEW 3.00" 3.00" MAX. MAX. 8.00" 8.00" MAX. MAX. BUMPERS AND NERF BARS Nerf Bars are required on both the left and right side of the car and must be scale appearing. Nerf Bars may extend up to .75” past the outside edge of tires.
    [Show full text]
  • Stockton Grand American Modifieds
    ! ! 2020 COMPETITION RULES! STOCKTON GRAND AMERICAN MODIFIEDS! ! INTRODUCTION" Stockton 99 Speedway reserves the right to alter or amend these rules and regulations in the interest of safety, cost control and / or fair competition. Any changes will be !posted as an “addendum” to the rules. It is the responsibility of each competitor to read and understand the contents of this rule book. In the event of a disagreement or dispute regarding the interpretation or application of the rules written herein, the decision of the speedway manager shall prevail. ! " Illegal components may be confiscated by Stockton 99 Speedway and become property of the speedway. All deficient safety issues must be corrected before the car is allowed to compete. All non - safety rules infractions will be addressed by the Stockton 99 Speedway technical staff and, if deemed to have a performance advantage, may require the competitor to repair before being allowed to compete, or, if deemed acceptable, may require a weight penalty be added for that nights event and the repair to be made before !the next event can be participated in. 0.0 Driver Eligibility Drivers in this division must be at least 14 years old. All drivers, owners and mechanics !must be registered members of Stockton 99 Speedway and in good standing.! 0.1 Any driver competing for rookie of the year points or who has competed in fewer than 5 races must display an obvious yellow stripe on the rear bumper of his or her vehicle while competing. ! " 1.0 Competing models ! 1.1 Open to any Grand American, IMCA, or NASCAR type, traditional modified that meets the requirements, measurements and dimensions spelled out in these rules.
    [Show full text]
  • DIRT MIDGET SERIES 2020 Rule Book APPENDIX D
    DIRT MIDGET SERIES 2020 Rule Book APPENDIX D 2020 Dirt National & Western Midgets Division Technical Specifications 401 Design and Construction All phases of design and construction are subject to the approval of the Technical Director. The Chief Steward and the Tech- nical Director may exclude any car, design or construction, which they deem unsafe or not meeting the specifications, the spirit and/or the intentions of the rules contained herein. 402 Dimensions and Weight A. The wheelbase must be at least 66 inches and no more than 76 inches. B. The overall width will be a maximum of 65 inches. C. The right front tire cannot be farther out than the right rear tire when the right rear wheel is set at maximum width. (as measured straight line along outside RR to outside RF) D. All cars must weigh a minimum of 1,035 pounds including driver. E. Additional bolt on weight must be mounted and fastened to the frame and/or chassis in a secure manner. Weight must be mounted in an area between bottom frame rails, front and rear axles and no higher than mid rails at cockpit. All weight must be mounted within confines of frame. NO BALLAST/WEIGHT IN NERFS, BUMPERS, FRONT AXLE. 403 Car Construction and Body A. All cars shall be rear drive only. Engine offset is limited to a maximum of one (1) inch, (two inches overall), from the chassis centerline as measured at the centerline of the crankshaft. Engine inclination is limited to forty-five degrees from vertical as measured from the vertical centerline of the cylinder bore.
    [Show full text]
  • 2021 USAC NATIONAL .25 MIDGET RULE BOOK This Rulebook Will Be Used for All National, Regional and Championship Events
    2021 USAC NATIONAL .25 MIDGET RULE BOOK This rulebook will be used for all National, Regional and Championship Events Effective Date of These Rules - These rules of competition become effective January 1, 2021, and supersede all previous rules, bulletins or supplementary regulations. 1.2 Revision of Rules - The United States Auto Club reserves the right to revise these rules or any supplements thereto at any time. References forward of USAC will be understood to mean the United States Auto Club. 1.3 Member in Good Standing - defined as a USAC member who has fulfilled their financial obligations to their respective USAC.25 club, any USAC.25 club they participate at and to USAC, along with any additional obligations to their respective club. Note: Some locations around the country may have different state and local rules and regulations with regards to safety, construction and procedures for motorsports events. The stricter local rules will apply for events held at those locations. It will be necessary for those clubs or events to clearly post these changes so that competitors are fully aware of these changes in advance. 2021 USAC NATIONAL .25 MIDGET RULE BOOK 1 APPENDIX I 2021 .25 Midget Division Technical Specifications This Appendix Pertains to .25 Midgets (May be referred to in this section as QM where needed) 701 Design and Construction All phases of design and construction are subject to the approval of the USAC.25 Series Director and USAC Technical Officials. USAC may exclude any car, design or construction, which they deem unsafe, not meeting the USAC.25 specifications, het spirit of USAC.25 racing and/or the intentions of the rules contained herein.
    [Show full text]
  • 2003 Official Rules Package Corporate Bylaws QUARTER
    QUARTER SCALE AUTO CLUB , Inc. Website http://www.qsac.org 2003 Official Rules Package and Corporate Bylaws Copyright © 2003 [QSAC, Inc] All rights reserved. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders Table of Contents Introduction .................................................................. 3 Rule change summary .................................................3 General Car Specifications ...........................................12-13 Safety Requirements ................................................... 4 • Engine General Requirements ................................................ 4 • Exhaust Track Sanctioning and Construction Requirements ..... 5 • Carburetor Cash Purse Payout Schedule ...................................... 5 • Clutch Race-Day Schedule of Events .....................................6-7 • Ignition Module • Sign In and Registration • Fuel • Practice • Fuel System • Driver's Meeting • Car Numbers • Concourse’ • Chassis • Pre-Race Tech Inspection • Tires and Wheels • Pill Draw or Single Car Qualifying • Miscellaneous • Trophy Dashes (optional) • Impact Parts • Heat Races Body Manufacturer Specifications ................................14 • Main Events Manufacturers and Suppler Listing ...............................14 • Post Race Tech Inspection Grand National Stock Car Specifications......................15 • Awards Sportsman Stock Car Specifications ............................15 Race Format - Procedures ........................................
    [Show full text]