For the latest prices, please check AutomationDirect.com.

Flow Sensors

Up-to-date price list: www.automationdirect.com/pricelist FREE Technical Support: www.automationdirect.com/support FREE Videos: www.automationdirect.com/videos FREE Documentation: www.automationdirect.com/documentation FREE CAD drawings: www.automationdirect.com/cad

www.automationdirect.com/flow-sensors Flow Sensors mFLS-1 For the latest prices, please check AutomationDirect.com. For the latest prices, please check AutomationDirect.com.

Flow Sensors, Switches, Meters Flow Sensors, Switches, Meters and Transmitters and Transmitters Vortex Flow Sensors ProSense VFS series vortex flow sensors are a very cost-effective solution to measure water based liquids flow, optimized to monitor water and deionized water flow in High Performance Magmeters industrial applications. The pushbuttons and display allow easy sensor set up to measure flow rate and temperature, and the outputs can be used for continuous flow ProSense FMM Series Magmeters are designed to reliably or temperature monitoring or as a flow or temperature limit switch. detect the flow rate of conductive media up to 160 gallons per The Vortex technology uses altenating vortices created by a bluff body as the liquid minute. The stainless steel, mechanically-robust design mounts flow passes through. The vortices are detected by a piezoceramic sensor, which allows directly in-line providing a compact, low-profile installation 5 the electronics to determine the flow velocity based on the frequency of the vortices. Starting at for process control. YEAR A 4-digit numeric display with pushbutton setup simultaneously Key features Vortices Flow direction $498.00 indicates flow rate, fluid temperature and total volume.Simple • Optimized for water/deionized water flow applications to setup and easy to install, the ProSense FMM is a reliable Starting at • Cost effective solution for flow switch or continuous flow alternative to traditional flow meters and mechanical flow $199.00 measurement switches. These flow meters are the new benchmark for price • Volumetric flow rate and temperature measurement and performance for your flow sensing applications. • TFT color display with pushbutton setup • Two outputs selectable for switch or frequency signals Bluff body Piezoceramic sensor Key features • For water and water based media FTS Series Liquid/Air Thermal Flow Sensor • Flow rates up to 160 gpm ProSense FTS Series liquid/air thermal flow sensors use an RTD • Pipe sizes up to 2 inches temperature sensor to measure the temperature of the fluid • DC switching, pulse, frequency and analog outputs or air as it passes through the probe and uses this reading • Monitor flow rate, total volume and temperature in one sensor as a reference. A heating element, also located in the probe, heats up the fluid or air and rises their temperatureas they Reference pass through. This rise in temperature is measured by a RTD 5 second RTD temperature sensor in the probe, which then is YEAR Flow Sensor used to calculate the flow based on the rise of temperature. A Probe Tip faster flow transfers less heat resulting in a smaller temperature difference between the RTD sensors. Slower flow will transfer Heater and Measuring RTD FSD and FSA Series Flow Switches more heat resulting in a greater temperature difference between the RTD sensors. and Transmitters Starting at The FSA Series flow transmitters monitor liquid media and Key features provide an analog output proportional to flow rate for various $235.00 • Optimized for water and glycol solutions, or air Flowing liquid/air carries heat away flow applications. The FSA series flow transmitter sensing prin- from the probe Starting at • Cost effective solution for flow switch or flow transmitter ciple is based on differential pressure which ensures extremely fast • Volumetric flow rate and temperature measurement (up to 16 inches pipe ID) $135.00 response time and allows for a precise flow measurement. • 4-digit, two color alphanumeric display with pushbutton setup The ProSense FSD Series flow switch sensor utilizes a spring- • Two outputs selectable for switch or frequency signals supported piston that is lifted by the flowing medium. The piston position is detected via an inductive sensor and is output as a digital signal. The spring resets the piston to its initial position FG1 Series Mechanical Variable Area Flow Meters with decreasing flow. ProSense FG1 Series flow meter is a mechanical variable area instrument designed with a precision molded, sharped edge orifice located within the piston assembly to form an annular opening with the metering cone. Flow passing through the meter creates Key features a pressure differential across the orifice, which causes the piston to move precisely in • Ideal for applications such as machine tool coolant flow, HVAC water flow, and direct proportion to the rate of flow against the spring. These flow meters can be used injection molding cooling water flow in horizontal or vertical positions. The flow rate is indicated by a red indicator relative • Immune to rapid temperature changes of media to the numerical flow scale. • Fast response time Limit Body • Flow rates up to 27 gpm Flow Indicator Indicator Sharp-edged • Pipe sizes up to 1 inch Key features Orifice • Integrated check valve design allows the sensor to be mounted horizontally or

• Optimized for water or petroleum based fluids End vertically Fitting • Constructed of high impact polysulfone plastic Fitting O-ring • Easy to read flow scales in both, GPM and LPM Spring

Starting at • Adjustable limit pointers Flow Scale Flow Piston $50.00 • Relatively insensitive to shock and vibration Assembly • Can be installed in any angle allowing for system Metering Cone design flexibilityo mFLS-2 Flow Sensors 1-800-633-0405 www.automationdirect.com/flow-sensors Flow Sensors mFLS-3