Nonimaging Fresnel Lenses Design and Performance of Solar Concentrators Series: Springer Series in Optical Sciences

Total Page：16

File Type：pdf, Size：1020Kb

Nonimaging Fresnel Lenses Design and Performance of Solar Concentrators Series: Springer Series in Optical Sciences

springer.com Ralf Leutz, Akio Suzuki Nonimaging Fresnel Lenses Design and Performance of Solar Concentrators Series: Springer Series in Optical Sciences This is after long the first current book on the subject Useful for optical scientists and engineers alike Offers a new technique for application Nonimaging Fresnel Lenses: Design and Performance of Solar Concentmtors; what are we talking about? It is easy to forget that you, dear reader, may not be one of those who work inexactly the same field as we do: nonimaging optics for the concentration of sunlight. You may be a researcher in some optical science interested in the core subject of this book: the world's first practical design of a nonimaging Fresnel lens concentrator. You may not be too excited about the collection of solar energy, but you would want a fuB description of the optical performance of the lens. Which you will get, mostly in terms of nonimaging optics, complete with test results, and set against the competition of imaging Fresnel lenses and mirror-based imaging and nonimaging concentrators. If you are a solar energy professional, 2001, XI, 274 p. you are likely to be interested in reading why nonimaging optics and solar energy coBection go together so weB. They do so, because the concentration of solar energy does not demand Printed book imaging qualities, but instead requires flexible designs of highly uniform flux concentrators Hardcover coping with solar disk size, solar spectrum, and tracking errors. Nonimaging optics has been 169,99 € | £149.99 | $219.99 developed to perfection since its discovery in 1965, in dealing with solar power conversion. [1] 181,89 € (D) | 186,99 € (A) | CHF Much of this experience is useful in nonimaging optical design in other fields where the 200,50 markets already are more rewarding than in solar power generation, such as optoelectronics. Softcover 119,99 € | £109.99 | $149.99 [1]128,39 € (D) | 131,99 € (A) | CHF 141,50 eBook 96,29 € | £87.50 | $109.00 [2]96,29 € (D) | 96,29 € (A) | CHF 113,00 Available from your library or springer.com/shop MyCopy [3] Printed eBook for just € | $ 24.99 springer.com/mycopy Order online at springer.com / or for the Americas call (toll free) 1-800-SPRINGER / or email us at: [email protected]. / For outside the Americas call +49 (0) 6221-345-4301 / or email us at: [email protected]. The first € price and the £ and $ price are net prices, subject to local VAT. Prices indicated with [1] include VAT for books; the €(D) includes 7% for Germany, the €(A) includes 10% for Austria. Prices indicated with [2] include VAT for electronic products; 19% for Germany, 20% for Austria. All prices exclusive of carriage charges. Prices and other details are subject to change without notice. All errors and omissions excepted. [3] No discount for MyCopy. Part of .

Copy Link

Recommended publications

Energy Feedback Freeform Lenses for Uniform Illumination of Extended Light Source Leds
Energy feedback freeform lenses for uniform illumination of extended light source LEDs 1 1 2 1 1,* ZONGTAO LI, SHUDONG YU, LIWEI LIN , YONG TANG, XINRUI DING, WEI 1 1 YUAN, BINHAI YU 1 Key Laboratory of Surface Functional Structure Manufacturing of Guangdong High Education Institutes, South China University of Technology, Guangzhou 510640, China 2 Department of Mechanical Engineering, University of California, Berkeley, California 94720, United States *Corresponding author: [email protected] Received XX Month XXXX; revised XX Month, XXXX; accepted XX Month XXXX; posted XX Month XXXX (Doc. ID XXXXX); published XX Month XXXX Using freeform lenses to construct uniform illumination systems is important in light-emitting diode (LED) devices. In this paper, the energy feedback design is used for freeform lens (EFFL) constructions by solving a set of partial differential equations that describe the mapping relationships between the source and the illumination pattern. The simulation results show that the method can overcome the illumination deviation caused by the extended light source (ELS) problem. Furthermore, a uniformity of 95.6% is obtained for chip-on-board (COB) compact LED devices. As such, prototype LEDs manufactured with the proposed freeform lenses demonstrate significant improvements in luminous efficiency and emission uniformity. © 2016 Optical Society of America OCIS codes: (220.4298) Nonimaging optics; (220.2945) Illumination design; (230.3670) Light-emitting diodes. sources (PLSs). For LED applications, the brightness of these LEDs is 1. Introduction not sufficient. Although a module with multiple sources makes it possible to obtain sufficient luminous flux, Kuo found that such a Solid-state lighting devices, especially light-emitting diodes (LEDs), solution would lead to the “multi-shadow” phenomenon, which causes have gained attention recently as a result of their outstanding features the eyes to feel tired [9].
[Show full text]
Roland Winston
Science of Nonimaging Optics: The Thermodynamic Connection Roland Winston Schools of Natural Science and Engineering, University of California Merced Director, California Advanced Solar Technologies Institute (UC Solar) [email protected] http://ucsolar.org SinBerBEST) annual meeting for 2013. Singapore Keynote Lecture 1:30 – 2:00 January 9, 2013 Solar Energy 2 Applications 3 The Stefan Boltzmann law s T4 is on page 1 of an optics book--- Something interesting is going on ! What is the best efficiency possible? When we pose this question, we are stepping outside the bounds of a particular subject. Questions of this kind are more properly the province of thermodynamics which imposes limits on the possible, like energy conservation and the impossible, like transferring heat from a cold body to a warm body without doing work. And that is why the fusion of the science of light (optics) with the science of heat (thermodynamics), is where much of the excitement is today. During a seminar I gave some ten years ago at the Raman Institute in Bangalore, the distinguished astrophysicist Venkatraman Radhakrishnan famously asked “how come geometrical optics knows the second law of thermodynamics?” This provocative question from C. V. Raman’s son serves to frame our discussion. Nonimaging Optics 5 During a seminar at the Raman Institute (Bangalore) in 2000, Prof. V. Radhakrishnan asked me: How does geometrical optics know the second law of thermodynamics? A few observations suffice to establish the connection. As is well-known, the solar spectrum fits a black body at 5670 K (almost 10,000 degrees Fahrenheit) Now a black body absorbs radiation at all wavelengths, and it follows from thermodynamics that its spectrum (the Planck spectrum1) is uniquely specified by temperature.
[Show full text]
High Collection Nonimaging Optics
High Collection Nonimaging Optics W. T. WELFORD Optics Section Department of Physics Imperial College of Science, Technology and Medicine University of London London, England R. WINSTON Enrico Fermi Institute and Department of Physics University of Chicago Chicago, Illinois ® ACADEMIC PRESS, INC. Harcourt Brace Jovanovich, Publishers San Diego New York Berkeley Boston London Sydney Tokyo Toronto Contents Preface xi Chapter 1 Concentrators and Their Uses 1.1 Concentrating Collectors 1 1.2 Definition of the Concentration Ratio; the Theoretical Maximum 3 1.3 Uses of Concentrators 6 Chapter 2 Some Basic Ideas in Geometrical Optics 2.1 The Concepts of Geometrical Optics 9 2.2 Formulation of the Ray-Tracing Procedure 10 2.3 Elementary Properties of Image-Forming Optical Systems 14 2.4 Aberrations in Image-Forming Optical Systems 16 2.5 The Effect of Aberrations in an Image-Forming System on the Concentration Ratio 18 2.6 The Optical Path Length and Fermat's Principle 20 2.7 The Generalized Etendue or Lagrange Invariant and the Phase Space Concept 22 2.8 The Skew Invariant 28 2.9 Different Versions of the Concentration Ratio 28 Chapter 3 Some Designs of Image-Forming Concentrators 3.1 Introduction 31 3.2 Some General Properties of Ideal Image-Forming Concentrators 31 V/ Contents 3.3 Can an Ideal Image-Forming Concentrator Be Designed? 39 3.4 Media with Continuously Varying Refractive Index 44 3.5 Another System of Spherical Symmetry 46 3.6 Image-Forming Mirror Systems 48 3.7 Conclusions on Image-Forming Concentrators 50 Chapter 4 Nonimaging
[Show full text]
RX and RXI® for Optical Wireless Communications
Ultra compact optics for optical wireless communications Juan C. Miñano, Pablo Benítez, Rubén Mohedano, José L. Alvarez, Maikel Hernández, Juan C. González*, Kazutoshi Hirohashi**, Satoru Toguchi** IES, E.T.S.I. Telecomunicación, Universidad Politécnica de Madrid, 28040 Madrid, Spain *Universidad Europea de Madrid, Villaviciosa de Odón, Madrid, Spain **HITS (High Speed Infrared Transmission Systems) Laboratories, Inc., 2-16-16 Chuourinkan, Yamato, 242-0007 Japan ABSTRACT Advanced optical design methods [J.C. Miñano, J.C. González, “New method of design of nonimaging concentrators”, Appl. Opt. 31, 1992, pp.3051-3060] using the keys of nonimaging optics lead to some ultra compact designs which combine the concentrating (or collimating) capabilities of conventional long focal length systems with a high collection efficiency [J.C. Miñano, J.C. González, P. Benítez, “A high gain, compact, nonimaging concentrator: the RXI”, Appl. Opt. 34, 1995, pp. 7850-7856 ][ J.C. Miñano, P. Benítez, J.C. González, “RX: a nonimaging concentrator”, Appl. Opt. 34, 1995, pp. 2226- 2235]. One of those designs is the so-called RXI. Its aspect ratio (thickness/aperture diameter) is less than 1/3. Used as a receiver, i.e. placing a photodiode at the proper position, it gets an irradiance concentration of the 95% of the theoretical thermodynamic limit (this means for example, a concentration of 1600 times with an acceptance angle of ±2.14 degrees). When used as an emitter (replacing the aforementioned photodiode by an LED, for instance), similar intensity gains may be obtained within an angle cone almost as wide as the 95% of the thermodynamic limit. In a real device these irradiance (and intensity) gains are reduced by the optical efficiency.
[Show full text]
Optics Microstructured Optics SMS Design Methods Plastic Optics
www.led-professional.com ISSN 1993-890X Review LpR The technology of tomorrow for general lighting applications. Sept/Oct 2008 | Issue 09 Optics Microstructured Optics SMS Design Methods Plastic Optics LED Driver Circuits Display Report Copyright © 2008 Luger Research & LED-professional. All rights reserved. There are over 20 billion light fixtures using incandescent, halogen, Design of LED or fluorescent lamps worldwide. Many of these fixtures are used for directional light applications but are based on lamps that put Optics out light in all directions. The United States Department of Energy (DOE) states that recessed downlights are the most common installed luminaire type in new residential construction. In addition, the DOE reports that downlights using non-reflector lamps are typically only 50% efficient, meaning half the light produced by the lamp is wasted inside the fixture. In contrast, lighting-class LEDs offer efficient, directional light that lasts at least 50,000 hours. Indoor luminaires designed to take advantage of all the benefits of lighting-class LEDs can exceed the efficacy of any incandescent and halogen luminaire. Furthermore, these LEDs match the performance of even the best CFL (compact fluorescent) recessed downlights, while providing a lifetime five to fifty times longer before requiring maintenance. Lastly, this class of LEDs reduces the environmental impact of light (i.e. no mercury, less power-plant pollution, and less landfill waste). Classical LED optics is composed of primary a optics for collimation and a secondary optics, which produces the required irradiance distribution. Efficient elements for primary optics are concentrators, either using total internal reflection or combined refractive/reflective versions.
[Show full text]
A Review of Nonimaging Solar Concentrators for Stationary and Passive Tracking Applications ⁎ Srikanth Madala , Robert F
Renewable and Sustainable Energy Reviews (xxxx) xxxx–xxxx Contents lists available at ScienceDirect Renewable and Sustainable Energy Reviews journal homepage: www.elsevier.com/locate/rser A review of nonimaging solar concentrators for stationary and passive tracking applications ⁎ Srikanth Madala , Robert F. Boehm Center for Energy Research, Department of Mechanical Engineering, University of Nevada, Las Vegas 89154-4027, United States ARTICLE INFO ABSTRACT Keywords: The solar energy research community has realized the redundancy of image-forming while collecting/ Solar concentrators concentrating solar energy with the discovery of the nonimaging type radiation collection mechanism in Nonimaging optics 1965. Since then, various nonimaging concentration mechanisms have proven their superior collection CPC efficiency over their imaging counter-parts. The feasibility of using nonimaging concentrators successfully for Compound parabolic concentrator stationary applications has rekindled interest in them. The economic benefits are appealing owing to the V-trough elimination of tracking costs (installation, operation & maintenance and auxiliary energy). This paper is an Polygonal trough Concentration ratio exhaustive review of the available nonimaging concentrating mechanisms with stationary applications in mind. Non-tracking solar concentrators This paper also explores the idea of coupling nonimaging concentrators with passive solar tracking mechanism. Stationary solar concentrators CHC CEC Compound hyperbolic concentrators Compound elliptical concentrators Nonimaging Fresnel lenses Dielectric compound parabolic concentrators DCPC Trumpet-shaped concentrators 1. Introduction traditional imaging techniques of concentration fall short of the thermodynamic limit of maximum attainable concentration at least Amongst the total solar electric power worldwide today (as per by a factor of four due to severe off-axis aberration and coma causing 2015 data) [1], solar photovoltaics (PV) contribute about 227 GW, and image blurring and broadening.
[Show full text]
A Brief Overview of Non-Imaging Optics
2132-40 Winter College on Optics and Energy 8 - 19 February 2010 Overview of non-imaging optics V. Lakshminarayanan University of Waterloo Waterloo CANADA A Brief Overview of Non- Imaging Optics V. Lakshminarayanan University of Waterloo Waterloo, Canada What is Non-Imaging Optics? • Is the branch of optics which deals with transfer of light between a source and an object. • Techniques do not form an optimized (non-aberrated) image of source. • Optimized for radiative transfer from source to target Some examples • Optical light guides, non-imaging reflectors, nonimaging lenses, etc. • Practical examples: auto headlamps, LCD backlights, illuminated instrument panel displays, fiber optics illumination devices, projection display systems, concentration of sunlight for solar power, illumination by solar pipes, etc. Two major components of a non- imaging optics system •1. Concentration – maximize the amount of energy that “falls” on a target –ie., as in solar power •2. Illumination – control the distribution of light, i.e.,it is evenly spread of some areas and completely blocked in other areas - i.e., automobile lamps • Variables: Total radiant flux, angular distribution of optical radiation, spatial distribution of optical radiation • Collection efficiency An Optimized non-imaging optics example • THE flux at the surface of the Sun, 6.3 kW cm-2, falls off with the square of distance to a value of 137 mW cm-2 above the Earth's atmosphere, or typically 80–100 mW cm-2 at the ground. In principle, the second law of thermodynamics permits an optical device to concentrate the solar flux to obtain temperatures at the Earth's surface not exceeding the Sun's surface temperature.
[Show full text]
The CPV “Toolbox”: New Approaches to Maximizing Solar Resource Utilization with Application-Oriented Concentrator Photovoltaics
energies Article The CPV “Toolbox”: New Approaches to Maximizing Solar Resource Utilization with Application-Oriented Concentrator Photovoltaics Harry Apostoleris 1, Marco Stefancich 2 and Matteo Chiesa 1,3,* 1 Department of Mechanical Engineering, Khalifa University of Science & Technology, Abu Dhabi 127788, United Arab Emirates; [email protected] 2 School of Engineering & Applied Science, Rotterdam University of Applied Sciences, Blaak 10, TA 3011 Rotterdam, The Netherlands; [email protected] 3 Department of Physics & Technology, UiT the Arctic University of Norway, 9010 Tromsø, Norway * Correspondence: [email protected] Abstract: As the scaling of silicon PV cells and module manufacturing has driven solar energy penetration up and costs down, concentrator photovoltaic technologies, originally conceived as a cost-saving measure, have largely been left behind. The loss of market share by CPV is being locked in even as solar energy development encounters significant obstacles related to space constraints in many parts of the world. The inherently higher collection efficiency enabled by the use of concentrators could substantially alleviate these challenges, but the revival of CPV for this purpose requires substantial reinvention of the technology to actually capture the theoretically possible efficiency gains, and to do so at market-friendly costs. This article will discuss recent progress in key areas central to this reinvention, including miniaturization of cells and optics to produce compact, lightweight “micro-CPV” systems; hybridization of CPV with thermal, illumination and other applications to make use of unused energy streams such as diffuse light and waste heat; and the integration of Citation: Apostoleris, H.; Stefancich, sun-tracking into the CPV module architecture to enable greater light collection and more flexible M.; Chiesa, M.
[Show full text]
Fresnel-Based Concentrated Photovoltaic (CPV) System with Uniform Irradiance
Fresnel-based Concentrated Photovoltaic (CPV) System with Uniform Irradiance Irfan Ullah and Seoyong Shin Department of Information and Communication Engineering, Myongji University, Yongin 449-728, South Korea Abstract—Different designs have been presented to achieve optimize the incident radiation. Solar concentrators that are high concentration and uniformity for the concentrated used to collect solar radiation over cell include: Fresnel lens photovoltaic (CPV) system. Most of the designs have issues [4], parabolic concentrator [5], compound parabolic of low efficiency in terms of irradiance uniformity. To this concentrator (CPC) [6], parabolic trough [7], v-groove mirrors end, we present a design methodology to increase [8], refractive prism [9], and luminescent glass [10]. In CPV irradiance uniformity over solar cell. The system consists systems, point focus Fresnel lenses are generally used. To of an eight-fold Fresnel lens as a primary optical element concentrate the best radiation over cell, which has particular (POE) and an optical lens, which consists of eight parts, as dimensions, a secondary optics, which includes lens or reflector, is used. The overall performance of the CPV system a secondary optical element (SOE). Sunlight is focused depends on how effectively each of these elements performs through the POE and then light is spread over cell through individually and collectively. the SOE. In the design, maximum sunlight is passed over cell by minimizing losses. Results have shown that the Non-uniform irradiance is a well-known problem in CPV proposed CPV design gives good irradiance uniformity. systems [11]. For the CPV system, two types of non-uniformity The concentration module based on this novel design is a are caused in cell [12].
[Show full text]
Optical Design of an LED Motorcycle Headlamp with Compound Reflectors and a Toric Lens
E102 Vol. 54, No. 28 / October 1 2015 / Applied Optics Research Article Optical design of an LED motorcycle headlamp with compound reflectors and a toric lens 1 2, 1 1 WEN-SHING SUN, CHUEN-LIN TIEN, *WEI-CHEN LO, AND PU-YI CHU 1Department of Optics and Photonics, National Central University, Chung-Li 32001, Taiwan 2Department of Electrical Engineering, Feng Chia University, Taichung 40724, Taiwan *Corresponding author: [email protected] Received 31 March 2015; revised 16 July 2015; accepted 16 July 2015; posted 28 July 2015 (Doc. ID 236954); published 21 August 2015 An optical design for a new white LED motorcycle headlamp is presented. The motorcycle headlamp designed in this study comprises a white LED module, an elliptical reflector, a parabolic reflector, and a toric lens. The light emitted from the white LED module is located at the first focal point of the elliptical reflector and focuses on the second focal point. The second focal point of the elliptical reflector and the focal point of the parabolic reflector are confocal. We use nonsequential rays to improve the optical efficiency of the compound reflectors. The toric spherical lens allows the device to meet the Economic Commission of Europe, regulation no. 113 (ECE R113). Furthermore, good uniformity is obtained by using aspherical surface optimization of the same toric lens. The reflectivity of the reflector is 95%, and the transmittance of each lens surface is 98%. The average deviation of the high beam is 14.17%, and the optical efficiency is 66.45%. © 2015 Optical Society of America OCIS codes: (080.4228) Nonspherical mirror surfaces; (080.4295) Nonimaging optical systems; (220.2945) Illumination design; (220.4298) Nonimaging optics.
[Show full text]
Non-Imaging Optical Concentrators for Low-Cost Optical Interconnect
Non-imaging optical concentrators for low-cost optical interconnect Robert P. Dahlgren *, Jacob A. Wysocki, Prof. Kenneth D. Pedrotti Baskin School of Engineering, UC Santa Cruz 1156 High Street, Santa Cruz, CA 95064-1077 USA ABSTRACT In this work we report on a non-imaging optical concentrator for high-speed polymer optical fiber (POF), which has applications in chip-to-chip, consumer display, and backplane data transport. High-speed operation places demands on the ability of coupling from large-core media to small apertures typical of 10 Gbps optoelectronics. Design and fabrication of concentrators made by single point diamond turning and injection molding will be discussed, and comparison of experimental data to simulation will show good coupling efficiency with a wide tolerance to fiber misalignment. Keywords: Non-imaging optics, optical data interconnect, fiber-optic modules, chip scale package 1. INTRODUCTON In this work we investigate a non-imaging optical device that is well-suited for low-cost, high-speed optical interconnects that employ polymer optical fiber (POF) media. Low cost POF links having >10 Gigabit per second performance are desired for chip-to-chip, consumer display, backplane, and data communications applications 1,2. A number of approaches have been tried for waveguide coupling, such as ball lenses, molded bi-convex lenses 3, graded- index lenses 4, and non-imaging concentrators employing reflection 5 and total internal reflection 6. Additional approaches include simple butt coupling 7, aplanatic near-field optics 8, Fresnel micro-optics 9, photolithographic microlenses 10 , surface plasmon antennas 11 , and diffractive optical elements 12 . The concentrator proposed is a simple refractive aspheric that is amenable to standard package integration flow, and allows wide misalignment margins.
[Show full text]
Nonimaging Optics
Introduction ho NONIMAGING OPTICS Julio Chaves Light Prescriptions Innovators Madrid, Spain (^oC) CRC Press V*^ / Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Croup, an Informa business Contents Foreword xv Preface xvii Acknowledgments xix Author xxi List of Symbols xxiii List of Abbreviations and Terms xxv Part I Nonimaging Optics 1 1 Fundamental Concepts 3 1.1 Introduction 3 1.2 Imaging and Nonimaging Optics 3 1.3 The Compound Parabolic Concentrator 8 1.4 Maximum Concentration 17 1.5 Examples 22 References 23 2 Design of Two-Dimensional Concentrators 25 2.1 Introduction 25 2.2 Concentrators for Sources at a Finite Distance 25 2.3 Concentrators for Tubular Receivers 27 2.4 Angle Transformers 29 2.5 The String Method 30 2.6 Optics with Dielectrics 35 2.7 Asymmetrical Optics 37 2.8 Examples 41 References 52 3 Etendue and the Winston-Welford Design Method 55 3.1 Introduction 55 3.2 Conservation of Etendue 57 3.3 Nonideal Optical Systems 63 3.4 Etendue as a Geometrical Quantity 65 3.5 Two-Dimensional Systems 68 3.6 Etendue as an Integral of the Optical Momentum 70 3.7 Etendue as a Volume in Phase Space 75 3.8 Etendue as a Difference in Optical Path Length 78 3.9 Flow Lines 83 3.10 The Winston-Welford Design Method 87 3.11 Caustics as Flow Lines 99 ix Contents 3.12 Maximum Concentration 102 3.13 Etendue and the Shape Factor 106 3.14 Examples 110 References 115 Vector Flux 117 4.1 Introduction 117 4.2 Definition of Vector Flux 121 4.3 Vector Flux as a Bisector of the Edge Rays 126 4.4 Vector
[Show full text]