DOCSLIB.ORG

Navigation System

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Navigation System (FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO LANGUAGE: english-en; MARQUE: landrover; MODEL: Discovery 4 L Navigation system NAVIGATIONNavigation system SCREEN OVERVIEW WARNING: Do not adjust the touch 4. Message display area. screen controls, or allow the system 5. Distance to next turn. to distract the driver, while the vehicle 6. Return to previous screen soft key. is moving. Driver distraction can lead to accidents, causing serious injury or 7. Repeat last voice instruction soft key. death. 8. Point of Interest (POI). Fuel station icon is 1. Map direction control. This icon controls shown in the example. the orientation of the map. Touch to toggle Note: POI icons will not be displayed if the between North is up on the map, or zoom level is above 1/2 mile (1 km). direction of vehicle travel is up. 9. Current street location. 2. Global positioning system (GPS) 10. Display screen mode options soft key. availability. If a line appears through this icon, GPS is not available. 11. Screen off soft key. 3. Vehicle position icon. When North is up is 12. Return to the navigation menu soft key. selected, this icon will follow the direction of vehicle travel. 142 (FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO LANGUAGE: english-en; MARQUE: landrover; MODEL: Discovery 4 R Navigation system 13. Straight line direction and distance to SCREEN MODE OPTIONS destination. When a number is shown at Touch the screen mode options soft key to top right of the icon, this is the distance to display the possible options. Touch the the next way point. relevant icon to change the screen mode: 14. Zoom control soft key. Show full screen ACCESSING NAVIGATION WARNING: In the interests of road Show the split screen. A more safety, only operate, adjust or view detailed view of the local area and the system when it is safe to do so. Do road system is displayed in the not allow the system to distract the right side of the screen. driver while the vehicle is moving. Show the compass Driver distraction can lead to accidents causing serious injury or death. List of forthcoming junctions and WARNING: The navigation system is turn directions shown on the split not a substitute for driving safely, with screen due care and attention. Drivers should This icon displays enlarged next not assume that this feature will junction guidance info on the split correct errors of judgement in driving. screen The navigation system may not This facility is only available when function properly in all travelling on the highway, and circumstances. displays the remaining highway Note: For safety, most navigation settings exits (up to your required exit) and options are unavailable when the vehicle is in the exit numbers motion. Automatically shows the next To turn on the navigation system touch the junction on the right of the screen. Navigation soft key. Alternatively press the NAV hard key on the facia. COMPASS VIEW After touching the AGREE soft key, the touch screen will display the screen or menu that was It is possible to use compass view in North is in use when you last switched off the system. up or Direction of travel is up mode. Note: After approximately 12 seconds, the menu soft keys will disappear and display the map information only. Touch the MENU soft key to display the full MENU screen. 143 (FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO LANGUAGE: english-en; MARQUE: landrover; MODEL: Discovery 4 L Navigation system VOICE GUIDANCE ENTERING A DESTINATION Voice guidance may be cancelled (or From the navigation menu, select Destination re-instated) at any time by touching the Voice Entry. Guidance soft key on the map screen. If you are travelling to another country on your To set voice guidance volume, press and hold journey, it is advisable to change the the Tone hard key on the fascia while voice destination search using the Search Area soft guidance is in use. Once the Volume Setup key prior to entering your destination. This will menu is displayed, select Navigation and reduce the time taken to calculate a route. adjust the volume setting as desired. After There are several methods for entering a approximately 10 seconds the screen will destination. With each method you can select return to the previously display. from a list of route preferences, choose alternative routes and add intermediate points PERSONAL NAVIGATION SETTINGS to your journey. To access the navigation system settings The following destination entry options are menu, select NAVIGATION SETUP from the available, all are selected by touching the main menu. appropriate soft key: The following parameters may be configured: • Address: This allows you to enter a specific • Personal settings related to system street address, street or town. operation (e.g. arrival time readout, map • Point of Interest (POI): This allows text size, keyboard layout etc.). selection of a destination from the POI • Points of interest (POI) icons may be categories. added or removed from the map screen. • Map: A destination can be selected by • 2D/3D view. Both the map view and pinpointing on a map. guidance view can be toggled between 2D • Coordinates: The destination is entered as and 3D views. longitude and latitude coordinates. • System defaults may be restored. • Memory: Up to 106 destination locations • The vehicle position may be calibrated. can be stored in the system memory. Note: Settings for language, screen brightness • Previous: The previous 20 destinations are etc., should be set for the entire vehicle system stored for future use, and one of them may via SYSTEM SETTINGS, available from the be selected using this option. HOME menu. • Highway Entry/Exit: Enables selection of a Note: The MAP CHANGE option is used by your highway junction as a destination. Land Rover Retailer/Authorized Repairer to • Home: Can be used to store a frequently update map information stored within the used location. system. There are no user configurable • Off-road Point: This allows a destination settings within map change. used in off-road navigation to be selected as a destination. 144 (FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO LANGUAGE: english-en; MARQUE: landrover; MODEL: Discovery 4 R Navigation system ENTERING AN ADDRESS AS A Note: POI icons can only be displayed up to the DESTINATION 1/2 mile (1 km) zoom level. Select Address, then Town Name and enter the When a suitable POI has been selected, touch name of the town on the keyboard. Next, enter the Destination key to begin route calculation. the Street using the soft key, then House A confirmation screen will be displayed, Number (if known). followed by the map screen with the When an entry is made (in Street or Town destination identified by a red circle containing Name), if the system recognizes enough a white ring. letters, a list of matching options from the If satisfied with the destination and route database will be displayed. Select the required displayed, touch the Start soft key begin your street or town by touching it. journey. Your route will be highlighted on the Once the address has been entered, touch the map, with an arrow depicting your current OK soft key, and a map of the destination will location, and voice guidance instructions will be displayed overlaid with fine tune arrows. guide you along the route. To fine tune the destination use touch the required arrow on the screen. When you are ENTERING A DESTINATION USING ready to calculate a route, touch the THE MAP Destination soft key. If the destination is in the general location of A route is calculated and a route map overview your vehicle, entry via the map may be used. displayed. The destination is identified by a red Select Map from the Destination menu. The circle containing a white ring. local area will be displayed as a map overlaid If satisfied with the destination and route with fine tune arrows. Using the Zoom function displayed, touch the Start soft key begin your and the fine tune arrows, position the journey. Your route will be highlighted on the destination arrow over your required map, with an arrow depicting your current destination and select Destination. location, and voice guidance instructions will The navigation system will calculate your route guide you along the route. and display it on the screen. To start your journey, select Start. ENTERING A POINT OF INTEREST (POI) AS A DESTINATION Select the POI soft key, followed by a POI Name. Use the keyboard to enter a place name (e.g. Banbury) to display any related locations on the map. Touch the Categ soft key to view a list of the POI categories, or touch the List soft key to view a alphabetical list of available POIs in all categories. POI entry may also be made using the POI Near or Phone Number options. 145 (FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO LANGUAGE: english-en; MARQUE: landrover; MODEL: Discovery 4 L Navigation system ENTERING A DESTINATION USING RECALLING A PREVIOUS COORDINATES DESTINATION To navigate to a latitude/longitude destination, To recall one of the previous 20 destinations, select Coordinates. Enter the coordinates on select Previous. A list of the stored the screen using the numeric keypad. destinations is displayed. Touch the desired Note: The full latitude must be entered first, destination to select it. The details will be followed by the longitude. displayed as confirmation, select Destination to confirm. Once the coordinates have been entered (using the appropriate symbols for degrees, minutes, The navigation system will calculate the route seconds as required) select OK. The system and display it on the map.
Load more

Recommended publications
  • Google Earth User Guide
    Google Earth User Guide ● Table of Contents Introduction ● Introduction This user guide describes Google Earth Version 4 and later. ❍ Getting to Know Google Welcome to Google Earth! Once you download and install Google Earth, your Earth computer becomes a window to anywhere on the planet, allowing you to view high- ❍ Five Cool, Easy Things resolution aerial and satellite imagery, elevation terrain, road and street labels, You Can Do in Google business listings, and more. See Five Cool, Easy Things You Can Do in Google Earth Earth. ❍ New Features in Version 4.0 ❍ Installing Google Earth Use the following topics to For other topics in this documentation, ❍ System Requirements learn Google Earth basics - see the table of contents (left) or check ❍ Changing Languages navigating the globe, out these important topics: ❍ Additional Support searching, printing, and more: ● Making movies with Google ❍ Selecting a Server Earth ❍ Deactivating Google ● Getting to know Earth Plus, Pro or EC ● Using layers Google Earth ❍ Navigating in Google ● Using places Earth ● New features in Version 4.0 ● Managing search results ■ Using a Mouse ● Navigating in Google ● Measuring distances and areas ■ Using the Earth Navigation Controls ● Drawing paths and polygons ● ■ Finding places and Tilting and Viewing ● Using image overlays Hilly Terrain directions ● Using GPS devices with Google ■ Resetting the ● Marking places on Earth Default View the earth ■ Setting the Start ● Location Showing or hiding points of interest ● Finding Places and ● Directions Tilting and
    [Show full text]
  • QUICK REFERENCE GUIDE Latitude, Longitude and Associated Metadata
    QUICK REFERENCE GUIDE Latitude, Longitude and Associated Metadata The Property Profile Form (PPF) requests the property name, address, city, state and zip. From these address fields, ACRES interfaces with Google Maps and extracts the latitude and longitude (lat/long) for the property location. ACRES sets the remaining property geographic information to default values. The data (known collectively as “metadata”) are required by EPA Data Standards. Should an ACRES user need to be update the metadata, the Edit Fields link on the PPF provides the ability to change the information. Before the metadata were populated by ACRES, the data were entered manually. There may still be the need to do so, for example some properties do not have a specific street address (e.g. a rural property located on a state highway) or an ACRES user may have an exact lat/long that is to be used. This Quick Reference Guide covers how to find latitude and longitude, define the metadata, fill out the associated fields in a Property Work Package, and convert latitude and longitude to decimal degree format. This explains how the metadata were determined prior to September 2011 (when the Google Maps interface was added to ACRES). Definitions Below are definitions of the six data elements for latitude and longitude data that are collected in a Property Work Package. The definitions below are based on text from the EPA Data Standard. Latitude: Is the measure of the angular distance on a meridian north or south of the equator. Latitudinal lines run horizontal around the earth in parallel concentric lines from the equator to each of the poles.
    [Show full text]
  • Part V: the Global Positioning System ______
    PART V: THE GLOBAL POSITIONING SYSTEM ______________________________________________________________________________ 5.1 Background The Global Positioning System (GPS) is a satellite based, passive, three dimensional navigational system operated and maintained by the Department of Defense (DOD) having the primary purpose of supporting tactical and strategic military operations. Like many systems initially designed for military purposes, GPS has been found to be an indispensable tool for many civilian applications, not the least of which are surveying and mapping uses. There are currently three general modes that GPS users have adopted: absolute, differential and relative. Absolute GPS can best be described by a single user occupying a single point with a single receiver. Typically a lower grade receiver using only the coarse acquisition code generated by the satellites is used and errors can approach the 100m range. While absolute GPS will not support typical MDOT survey requirements it may be very useful in reconnaissance work. Differential GPS or DGPS employs a base receiver transmitting differential corrections to a roving receiver. It, too, only makes use of the coarse acquisition code. Accuracies are typically in the sub- meter range. DGPS may be of use in certain mapping applications such as topographic or hydrographic surveys. DGPS should not be confused with Real Time Kinematic or RTK GPS surveying. Relative GPS surveying employs multiple receivers simultaneously observing multiple points and makes use of carrier phase measurements. Relative positioning is less concerned with the absolute positions of the occupied points than with the relative vector (dX, dY, dZ) between them. 5.2 GPS Segments The Global Positioning System is made of three segments: the Space Segment, the Control Segment and the User Segment.
    [Show full text]
  • 2015 GPS SPS Performance Analysis
    An Analysis of Global Positioning System (GPS) Standard Positioning System (SPS) Performance for 2015 TR-SGL-17-04 March 2017 Space and Geophysics Laboratory Applied Research Laboratories The University of Texas at Austin P.O. Box 8029 Austin, TX 78713-8029 Brent A. Renfro, Jessica Rosenquest, Audric Terry, Nicholas Boeker Contract: NAVSEA Contract N00024-01-D-6200 Task Order: 5101147 Distribution A: Approved for public release; Distribution is unlimited. This Page Intentionally Left Blank Executive Summary Applied Research Laboratories, The University of Texas at Austin (ARL:UT) examined the performance of the Global Positioning System (GPS) throughout 2015 for the Global Positioning Systems Directorate (SMC/GP). This report details the results of that performance analysis. This material is based upon work supported by the US Air Force Space & Missile Systems Center Global Positioning Systems Directorate through Naval Sea Systems Command Contract N00024-01-D-6200, task order 5101147, \FY15 GPS Signal and Performance Analysis". Performance is defined by the 2008 Standard Positioning Service (SPS) Performance Standard (SPS PS). The performance standards provide the U.S. government's assertions regarding the expected performance of GPS. This report does not address each of the assertions in the performance standards. This report emphasizes those assertions which can be verified by anyone with knowledge of standard GPS data analysis practices, familiarity with the relevant signal specification, and access to a Global Navigation Satellite System (GNSS) data archive. The assertions evaluated include those of accuracy, integrity, continuity, and availability of the GPS signal-in-space (SIS) and the position performance standards. Chapter 2 of the report includes a tabular summary of the assertions that were evaluated and a summary of the results.
    [Show full text]
  • Using Handheld Global Positioning System Receivers for the Wheat Objective Yield Survey
    Using Handheld Global United States Positioning System Department of Agriculture Receivers for the Wheat Objective Yield Survey National Agricultural Michael W. Gerling Statistics Service Research and Development Division Washington DC 20250 RDD Research Report Number RDD-06-04 September 2006 This paper was prepared for limited distribution to the research community outside the United States Department of Agriculture. The views expressed herein are not necessarily those of the National Agricultural Statistics Service or of the United States Department of Agriculture. EXECUTIVE SUMMARY In 2005, Washington field enumerators successfully showed that handheld Global Positioning System (GPS) receivers could be utilized for the Agricultural Resource Management Survey Phase II and for the June Area Survey. Next, the Washington Field Office and the Research and Development Division investigated if GPS receivers could assist field enumerators with the Wheat Objective Yield Survey. Currently, Wheat Objective Yield Survey field enumerators go to specified areas of the sampled wheat fields, lay out two objective yield units and record various crop counts. Every month until the fields are harvested, the enumerator returns to the same units and records crop counts. Sometimes a field enumerator has difficulty finding the same location again or a different field enumerator may need to enumerate the field and is unable to find the same location. This costs NASS in field enumeration time, and in those instances where the units were unable to be found, the data quality suffers. In this study, 23 Washington field enumerators were provided with handheld GPS receivers to aid in the enumeration of 160 winter wheat samples. On their initial visit to each sampled field, they recorded the latitude and longitude coordinates of each unit as it was being laid out.
    [Show full text]
  • Formating Rules
    Applied Computer Systems doi: 10.1515/acss-2015-0010 _______________________________________________________________________________________________ 2015/17 Towards a Standard-Based Domain-Specific Platform to Describe Points of Interest Vicente García-Díaz 1, Jordán Pascual Espada 2, B. Cristina Pelayo García-Bustelo 3, Juan Manuel Cueva Lovelle 4, Janis Osis 5, 1, 2, 3, 4 University of Oviedo, Spain, 5 Riga Technical University, Latvia Abstract – With the proliferation of mobile and distributed Given the importance of POIs, especially from the systems capable of providing its geoposition and even the geographical point of view, large databases of information are geoposition of any other element, commonly called point of being created, for example, the OpenStreetMap Project, interest, developers have created a multitude of new software applications. For this purpose, different technologies such as the consisting of a knowledge base that creates and distributes GPS or mobile networks are used. There are different languages user-generated geographic data for the world [6]. However, or formats used to define these points of interest and some one of the major problems encountered when working with applications that facilitate such work. However, there is no POIs is the heterogeneity that exists in the formats used to globally accepted standard language, which complicates the represent them. There are several reasons that led to this intercommunication, portability and re-usability of the situation among which may include: 1) a large number
    [Show full text]
  • Navigon Easy 20 | Plus 20
    NAVIGON 20 EASY NAVIGON 20 PLUS User's manual English (United Kingdom) June 2010 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of- life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification. Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG, nor may they be transmitted in any form either electronically or mechanically, including photocopying and recording. All technical specifications, drawings etc are subject to copyright law. © 2010, NAVIGON AG All rights reserved. User's manual NAVIGON 20 EASY | 20 PLUS Table of contents 1 Introduction.......................................................................................6 1.1 About this manual ...................................................................................6 1.1.1 Conventions ..............................................................................6 1.1.2 Symbols ....................................................................................6 1.2 Legal notice.............................................................................................6 1.2.1 Liability ......................................................................................6
    [Show full text]
  • Gis Model of Analysis to Promote Tourism Through the Use of a Web Application
    DOI: http:/dx.doi.org/10.18180/tecciencia.2014.17.4 Gis model of analysis to promote tourism through the use of a web application Modelo Gis de análisis para promover el turismo a través del uso de una aplicación web Yuri Vanessa Nieto Acevedo1, Oswaldo Alberto Romero Villalobos2, Kelly Johanna Gallo Ramírez3 1Universidad Distrital Francisco José de Caldas, Bogotá, Colombia, [email protected] 2Universidad Distrital Francisco José de Caldas, Bogotá, Colombia [email protected] 3Universidad Distrital Francisco José de Caldas, Bogotá, Colombia, [email protected] Received: 16/Aug/2014 Accepted: 20/Sep/2014 Published: 30/Nov/2014 Abstract The sustainable development of tourism in little-known towns needs the support of web applications and GIS (Geographic Information System) technology. The aim of this paper is to provide a GIS Model of Analysis integrated into a Web Application called Turichia in order to promote tourism in Chía, a small town in Cundinamarca, Colombia, near Bogotá. The assembly of this web application includes different servers that use ESRI services like Geocoding, Network Analytics, and Web Feature Services and other Geoprocessing operations built in ArcMap for this specific purpose. Keywords: ArcGis Viewer for Flex, Geographic Information System (GIS), Point of Interest (POI), Tourism, Web Feature Service (WFS). Resumen El desarrollo sostenible del turismo en los pueblos no reconocidos necesita el apoyo de las aplicaciones web y la tecnología 29 SIG (Sistema de Información Geográfica). Este artículo describe el análisis de un modelo sig para el desarrollo de una aplicación web denominada Turichia, desarrollada para promover el turismo en Chía, un pequeño pueblo de Cundinamarca, situado cerca de Bogotá-Colombia.
    [Show full text]
  • Global Positioning System Receivers and Relativity
    INST. OF STAND & TEf" fcT'L f.:]f. NIST IIIDS blfiT17 PUBLICATIONS United States Department of Commerce Technology Administration Nisr National Institute of Standards and Technology N/ST Technical Note 1385 NIST Technical Note 1385 Global Position System Receivers and Relativity Neil Ashby Marc Weiss Time and Frequency Division Physics Laboratory National Institute of Standards and Technology 325 Broadway Boulder, Colorado 80303-3328 March 1999 '4rES U.S. DEPARTMENT OF COMMERCE, William M. Daley, Secretary TECHNOLOGY ADMINISTRATION, Gary R. Bachula, Acting Under Secretary for Technology NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, Raymond G. Kamnier, Director National Institute of Standards and Technology Technical Note Natl. Inst. Stand. Technol., Tech. Note 1385, 52 pages (March 1999) CODEN:NTNOEF U.S. GOVERNMENT PRINTING OFFICE WASHINGTON: 1999 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402-9325 . Contents 1 Introduction 1 2. Theory 2 2.1 Pseudorange 2 2.2 Phase Time 2 2.3 Relevant Relativity 3 2.4 Common Misunderstandings 4 2.5 User Corrections 6 2.6 Relativistic Doppler Effect and Use of the GPS Carrier 7 2.7 Rotation Matrix 8 3. Time Tagging at Receiver 9 3.1 Time Tagging at Receiver— General Prescription 9 3.2 Examples 11 Example 3.21 Multi- Channel Receiver, Time Tagging at Receiver 12 Example 3.211 Erroneous Use of ECEF Coordinates 16 Example 3.212 Iteration With a Succession of Inertial Frames 16 Example 3.213 The Benefit of Better Initialization 17 4. Time Tagging at Transmitter 18 4.1 Code Boundary Measurements 18 4.2 Phase Time 19 4.3 Accounting for Receiver Motion 20 4.4 Time Tagging at Transmitter—General Prescription 22 4.5 Examples 24 Example 4.51 Time Tagging at Transmitter 24 Example 4.52 Time Tagging at Transmitter, Neglecting Doppler Corrections 29 5.
    [Show full text]
  • GPS Tutorial for Hikers How to Efficiently Use Your Mobile As GPS Navigator for Hiking
    GPS Tutorial for Hikers How to efficiently use your mobile as GPS navigator for hiking By Marc TORBEY Examples from the Android software OruxMaps V1.0 1 Table of contents • Basics about GPS for hiking slide 3 • Before the hike slide 12 • It’s hiking day! slide 20 • After the hike slide 31 2 Basics about GPS for hiking 3 Abbreviations used • GE Google Earth (free software for computers) • GPS Global Positioning System • OM Orux Maps (GPS application for Android phones) • POI Point Of Interest (on a map) • WP Waypoint 4 GPS Global Positioning System • Several satellite around planet Earth, broadcast GPS “signals”: – GPS devices receive satellite signals… no transmission – Weak signals from remote satellites, so… • perceptible Outdoors only! • 1st “GPS fix” requires user to be still (not moving) • Origin of GPS systems – USA: NAVSTAR – Russia: GLONASS (since 2010) – UE: Galileo (available in 2020). • Goals of GPS systems: – Basic goal: knowing your position on a map – Navigation: sea, land (car) – Orientation: hiking trips 5 GPS maps Typically a digital map is either • A sophisticated software object comprising a drawing of the landscape (with roads, public monuments, …) + a database of POIs + some intelligent software capable of giving you directions to reach your destination POI. – Requires Internet connectivity, to access the latest maps and POIs. – Usually expensive Example Google maps • Or a simple picture, showing the landscape and possibly the roads. – No navigation capabilities but… Ok for hiking! – Can be used off-line by software like OM – Usually available free of charge – Ex: Google Earth/ Hybrid 6 GPS objects - Waypoints • A Waypoint is a point on the map, created in order to locate an important place on the map… – either by the “Create waypoint” function of the OM mobile (marks the user’s current location) – Or by clicking a point on the “Map” – Or by some software • On Google Earth it is called a Placemark.
    [Show full text]
  • Openpoi: an Open Place of Interest Platform
    OpenPOI: An Open Place of Interest Platform Grant McKenzie Department of Geography, McGill University, Montréal, Canada Krzysztof Janowicz STKO Lab, University of California, Santa Barbara, USA Abstract Places of Interest (POI) are a principal component of how human behavior is captured in today’s geographic information. Increasingly, access to POI datasets are being restricted – even silo-ed – for commercial use, with vendors often impeding access to the very users that contribute the data. Open mapping platforms such as OpenStreetMap (OSM) offer access to a plethora of geospatial data though they can be limited in the attribute resolution or range of information associated with the data. Nuanced descriptive information associated with POI, e.g., ambience, are not captured by such platforms. Furthermore, interactions with a POI, such as checking in, or recommending a menu item, are inherently place-based concepts. Many of these interactions occur with high temporal volatility that involves frequent interaction with a platform, arguably inappropriate for the “changeset” model adopted by OSM and related datasets. In this short paper we propose OpenPOI, an open platform for storing, serving, and interacting with places of interests and the activities they afford. 2012 ACM Subject Classification Information systems → Geographic information systems Keywords and phrases place, point of interest, open data, gazetteer, check-in Digital Object Identifier 10.4230/LIPIcs.GIScience.2018.47 Category Short Paper 1 Motivation Gazetteers play an important role in how we understand the world. They facilitate the labeling of geographic space thus forming the foundation of location-based services [3]. Historically, gazetteers have been categorized by scale, resolution, and theme.
    [Show full text]
  • Integrating Gps Observations with Classical Surveying Measurements
    APPENDIX H INTEGRATING GPS OBSERVATIONS WITH CLASSICAL SURVEYING MEASUREMENTS H.1 The Model The latter half of the twentieth century has brought about rapid and significant technological change to surveying and mapping. Geodesy matured from precision taping and triangulation to traversing and trilateration with the advent of electronic distance measuring (EDM) equipment to very accurate positioning with the global positioning system (GPS). With these technological achievements came increased accuracy in our determination of the shape and size of the earth. While it is well known that the earth can be mathematically approximated by an ellipsoid of revolution, the increased precision of our measurement tools also began to highlight the discrepancies between the real earth and its math model. Figure H.1 Geometry of the ellipse H.1 The ellipsoid is shown in figure H.1. The distance from the center of the ellipse to the surface along the equatorial plane is called the semi-major axis (a) while the distance to the poles is referred to as the semi-minor axis (b). It is also well established that a > b making the earth flattened at the poles and elongated at the equator. While the ellipse is very good at defining location, a different model is used to measure elevations. Here the geoid is used (figure H.2). The geoid is an equipotential surface where, at every point, the surface is perpendicular to the direction of gravity. The difference between the normal to the ellipsoid and the normal to the geoid (this is the vertical line or the direction of gravity) is called the deflection of the vertical (δ).
    [Show full text]