User's Guide for Nokia 6233

User’s Guide for Nokia 6233 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-145 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434

Copyright © 2007 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved. Nokia, Visual Radio, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See .

Copyright © 2007 Nokia. All rights reserved. i Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 1.1

For your safety...... vii Enhanced voice dialing ...... 11 Answer or reject a voice call...... 12 General information ...... x Call waiting ...... 12 Access codes ...... x Options during a voice call...... 12 Security code...... x Make a video call ...... 13 PIN codes...... x Answer or reject a video call...... 13 PUK codes ...... x Barring password ...... x Options during a video call...... 14 Configuration settings service..... xi 4. Write text ...... 15 Download content and Settings ...... 15 applications...... xi Predictive text input...... 15 Nokia support and contact Traditional text input ...... 16 information...... xi 5. Navigate the menus...... 17 1. Get started ...... 1 Install the SIM card and the 6. Messaging...... 18 battery ...... 1 Text messages (SMS)...... 18 Install a memory card...... 2 Write and send SMS messages ...... 18 Charge the battery ...... 3 Read and reply to an SMS Switch the phone on and off ...... 4 message ...... 19 SIM messages...... 19 Set the time, time zone, and date..... 4 Plug and play service...... 4 Multimedia messages...... 19 Normal operating position...... 4 Write and send a multimedia message ...... 20 2. Your phone...... 6 Send a message...... 21 Keys and parts ...... 6 Cancel message sending...... 21 Standby mode...... 7 Read and reply to a multimedia Active standby ...... 7 message ...... 21 Standby mode shortcuts...... 8 Memory full...... 22 Power saver ...... 9 Folders ...... 22 Indicators ...... 9 Flash messages...... 23 Keypad lock (keyguard)...... 10 Write a flash message ...... 23 Receive a flash message ...... 23 3. Call functions...... 11 Audio messages ...... 23 Make a voice call...... 11 Create an audio message...... 23 Speed dialing...... 11 Receive an audio message...... 24

Copyright © 2007 Nokia. All rights reserved. iii E-mail application...... 24 Display ...... 36 Settings Wizard...... 24 Standby mode...... 36 Write and send an e-mail...... 25 Standby settings...... 36 Download e-mail ...... 25 Screen saver ...... 37 Read and reply to e-mail...... 25 Power saver ...... 37 E-mail folders...... 26 Sleep mode ...... 37 Spam filter ...... 26 Font size ...... 37 Voice messages...... 26 Time and date...... 37 Info messages ...... 27 My shortcuts...... 38 Service commands...... 27 Left selection key...... 38 Delete messages...... 27 Right selection key ...... 38 Message settings ...... 27 Navigation key...... 38 General...... 27 Enable active standby...... 38 Text message and SMS e-mail...... 27 Voice commands ...... 38 Multimedia message...... 28 Connectivity...... 39 E-mail...... 29 Bluetooth wireless technology...... 39 Set up a Bluetooth connection...... 40 7. Contacts ...... 31 Bluetooth wireless connection...... 40 Search for a contact ...... 31 Bluetooth settings ...... 40 Save names and phone Infrared ...... 41 numbers...... 31 Packet data...... 41 Save numbers and text items...... 31 Packet data connection ...... 42 Copy contacts...... 32 Packet data settings...... 42 Edit contact details...... 32 Data transfer ...... 42 Data transfer with a compatible Delete contacts ...... 32 device ...... 43 Business cards ...... 32 Data transfer without SIM card...... 43 Settings...... 33 Synchronize from a compatible Groups...... 33 PC ...... 43 Speed dials...... 33 Synchronize from a server...... 44 Service and my numbers...... 33 USB data cable ...... 44 Call...... 44 8. Log...... 34 Phone...... 45 9. Settings ...... 35 Enhancements...... 46 Profiles...... 35 Configuration ...... 46 Flight mode...... 35 Security ...... 47 Themes...... 35 Digital rights management...... 48 Tones ...... 36 Restore factory settings ...... 48 iv Copyright © 2007 Nokia. All rights reserved. 10. Operator menu ...... 49 Add a channel...... 61 Receive an invitation ...... 61 11. Gallery...... 50 PTT settings ...... 61 Format memory card ...... 50 14. Organizer...... 63 12. Media ...... 51 Alarm clock ...... 63 Camera...... 51 Stop the alarm...... 63 Take a photo...... 51 Calendar...... 63 Record a video clip...... 51 Make a calendar note...... 64 Camera settings ...... 52 Note alarm...... 64 Media player ...... 52 To-do list...... 64 Progressive download...... 52 Notes...... 64 Set up the phone for a streaming Calculator ...... 65 service ...... 52 Convert currency...... 65 Music player...... 53 Countdown timer ...... 65 Play the music tracks transferred to Stopwatch ...... 66 the phone...... 53 Music player settings...... 53 15. Applications ...... 67 Radio ...... 54 Games...... 67 Save radio channels ...... 54 Launch a game ...... 67 Listen to the radio ...... 55 Game downloads...... 67 Voice recorder...... 56 Game settings...... 67 Record sound ...... 56 Collection...... 67 List of recordings ...... 56 Launch an application...... 67 Define a storage folder...... 56 Application options ...... 67 Equalizer...... 56 Download an application...... 68 13. Push to talk ...... 57 Presenter...... 68 Connect to the PTT service...... 57 16. Web...... 70 Make and receive a PTT call...... 58 Basic steps to access and use Make a channel or a group call...... 58 services...... 70 Make a one-to-one call...... 58 Set up browsing...... 70 Make a PTT call to multiple Connect to a service...... 70 recipients...... 59 Browse pages...... 71 Receive a PTT call...... 59 Callback requests...... 59 Browse with phone keys...... 71 Options while browsing ...... 71 Send a callback request ...... 59 Direct calling...... 72 Respond to a callback request ...... 60 Bookmarks...... 72 Add a one-to-one contact ...... 60 Receive a bookmark ...... 72 PTT channels...... 60

Copyright © 2007 Nokia. All rights reserved. v Appearance settings ...... 72 19. Battery information...... 79 Security settings ...... 73 Charging and discharging...... 79 Cookies...... 73 Nokia battery authentication Scripts over secure connection...... 73 guidelines...... 80 Download settings...... 74 Service inbox...... 74 20. Nokia original Service inbox settings...... 74 enhancements...... 82 Cache memory...... 74 Battery...... 83 Browser security...... 75 Nokia 616 Car Kit...... 83 Security module ...... 75 Nokia Universal Holder CR-39.... 83 Certificates ...... 75 Nokia Connectivity Cable Digital signature...... 76 CA-53...... 84 17. SIM services...... 77 21. Care and maintenance...... 85 18. PC connectivity ...... 78 22. Additional safety Nokia PC Suite...... 78 information...... 86 EGPRS, HSCSD, CSD, and WCDMA...... 78 Index...... 90 Data communication applications...... 78

Read these simple guidelines. Not SWITCH OFF NEAR following them may be dangerous or BLASTING illegal. Read the complete user guide for Follow any restrictions. Do further information. not use the phone where blasting is in progress. SWITCH ON SAFELY Do not switch the phone on USE SENSIBLY when wireless phone use is Use only in the normal prohibited or when it may position as explained in the cause interference or danger. product documentation. Do not touch the antenna ROAD SAFETY COMES FIRST unnecessarily. Obey all local laws. Always keep your hands free to QUALIFIED SERVICE operate the vehicle while Only qualified personnel may driving. Your first install or repair this product. consideration while driving ENHANCEMENTS AND should be road safety. BATTERIES Use only approved INTERFERENCE enhancements and batteries. All wireless phones may be Do not connect incompatible susceptible to interference, products. which could affect performance. WATER-RESISTANCE Your phone is not SWITCH OFF IN HOSPITALS water-resistant. Keep it dry. Follow any restrictions. Switch the phone off near BACK-UP COPIES medical equipment. Remember to make back-up copies or keep a written SWITCH OFF IN AIRCRAFT record of all important Follow any restrictions. information stored in your Wireless devices can cause phone. interference in aircraft. CONNECTING TO OTHER SWITCH OFF WHEN DEVICES REFUELING When connecting to any Do not use the phone at a other device, read its user refueling point. Do not use guide for detailed safety near fuel or chemicals. instructions. Do not connect incompatible products.

Copyright © 2007 Nokia. All rights reserved. vii EMERGENCY CALLS ■ Network services Ensure the phone is switched on and in service. Press the To use the phone you must have service end key as many times as from a wireless service provider. Many of needed to clear the display the features in this device depend on and return to the start features in the wireless network to screen. Enter the emergency function. These network services may not number, then press the call be available on all networks or you may key. Give your location. Do have to make specific arrangements with not end the call until given your service provider before you can permission to do so. utilize network services. Your service provider may need to give you additional ■ About your device instructions for their use and explain what charges will apply. Some networks The wireless device described in this guide may have limitations that affect how you is approved for use on the EGSM 900; can use network services. For instance, GSM 1800 and1900; and WCDMA 2100 some networks may not support all networks. Contact your service provider language-dependent characters and for more information about networks. services. When you use the features in this device, Your service provider may have requested obey all laws and respect privacy and that certain features be disabled or not legitimate rights of others. activated in your device. If so, they will When you take and use images or video not appear on your device menu. Your clips, obey all laws and respect local device may also have been specially customs as well as privacy and legitimate configured. This configuration may rights of others. include changes in menu names, menu order, and icons. Contact your service Warning: To use any features provider for more information. in this device, other than the alarm clock, the device must be This device supports WAP 2.0 protocols switched on. Do not switch the (HTTP and SSL) that run on TCP/IP device on when wireless device protocols. Some features of this device, use may cause interference or such as multimedia messaging (MMS), danger. browsing, e-mail application, instant messaging, presence-enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.

viii Copyright © 2007 Nokia. All rights reserved. ■ Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, instant messages, e-mail, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

■ Enhancements A few practical rules about accessories and enhancements. • Keep all accessories and enhancements out of the reach of small children. • When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. • Check regularly that enhancements installed in a vehicle are mounted and are operating properly. • Installation of any complex car enhancements must be made by qualified personnel only.

■ Access codes module. See ”Security module” p. 75. The module PIN is supplied with the Security code SIM card if the SIM card has a security module in it. The security code (5 to 10 digits) helps to protect your phone against The signing PIN is required for the unauthorized use. The preset code is digital signature. See ”Digital 12345. To change the code, and to signature” p. 76. The signing PIN is set the phone to request the code, supplied with the SIM card if the see ”Security” p. 47. SIM card has a security module in it. If you enter an incorrect security code five times in succession, the PUK codes phone ignores further entries of the The personal unblocking key (PUK) code. Wait for 5 minutes, and enter code and the universal personal the code again. unblocking key (UPUK) code (8 digits) is required to change a PIN codes blocked PIN code and UPIN code, respectively. If the codes are not The personal identification number supplied with the SIM card, contact (PIN) code and the universal your service provider for the codes. personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against Barring password unauthorized use. See ”Security” The barring password (4 digits) is p. 47. The PIN code is usually required when you use the Call supplied with the SIM card. Set the barring service. See ”Security” p. 47. phone to request the PIN code each You can obtain the password from time the phone is switched on. your service provider. If you enter an The PIN2 code (4 to 8 digits) may be incorrect barring password three supplied with the SIM card and is times in succession, the password is required for some functions. blocked. Contact your service provider or network operator. The module PIN is required to access the information in the security xCopyright © 2007 Nokia. All rights reserved. ■ Configuration settings ■ Download content and service applications Before you use multimedia You may be able to download messaging, instant messaging and content, such as themes, tones, and presence, push to talk, e-mail, video clips, to the phone (network synchronization, streaming, and the service). Select the download browser, you must have the proper function (for example, in Gallery). To configuration settings on your access the download function, see phone. You may receive the settings the respective menu descriptions. directly as a configuration message, For availability of different services, which you save to your phone. For pricing, and tariffs, contact your more information on availability, service provider. contact your network operator, Important: Use only service provider, or nearest services that you trust and authorized Nokia dealer. that offer adequate security When you have received the settings and protection against as a configuration message, and the harmful software. settings are not automatically saved and activated, Configuration ■ Nokia support and settings received is displayed. contact information To save the received settings, select For the latest version of this guide, Show > Save. If the phone requests downloads, services and additional Enter settings' PIN:, enter the PIN information related to your Nokia code for the settings, and select OK. product, please visit To receive the PIN code, contact the www.nokia-asia.com/6233/support service provider that supplies the or your local Nokia web site. You settings. may also download free If no settings are saved, these configuration settings such as MMS, settings are saved and set as default GPRS, e-mail, and other services for configuration settings. Otherwise, your phone model at the phone asks, Activate saved www.nokia-asia.com/phonesettings. configuration settings? Should you still require assistance, To discard the received settings, please refer to select Show > Discard. www.nokia-asia.com/contactus.

■ Install the SIM card and 2. To remove the battery, lift it as the battery shown (3). Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children.

For availability and information on 3. To release the SIM card holder, using SIM card services, contact gently pull the locking clip of the your SIM card vendor. This may be card holder, and open it (4). the service provider, network Insert the SIM card into the SIM operator, or other vendor. card holder (5). Make sure that This device is intended for use with the SIM card is properly inserted the BP-6M battery. and that the gold-colored The SIM card and its contacts can contact area on the card is facing easily be damaged by scratches or downwards. bending, so be careful when Close the SIM card holder (6), and handling, inserting, or removing the press it until it snaps into card. position. 1. With the back of the phone facing you, slide the back cover (1) to remove it from the phone (2).

4. Replace the battery (7). these functions and features may not function properly. Use only compatible microSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the memory card slot and are not compatible with this 5. Place the back cover in the device. Using an incompatible correct position (8). memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function 6. Slide the back cover into place correctly or be fully compatible with (9). this device. You can use a memory card to extend the memory of Gallery. See ”Gallery” p. 50. You can insert or change the memory card without switching the phone off. ■ Install a memory card Important: Do not remove the memory card in the The phone’s middle of an operation microSD card when the card is being included with accessed. Removing the your phone card in the middle of an contains preloaded ringing tones, operation may damage the themes, tones, and graphics. If you memory card as well as the delete, reload, or replace this card, device, and data stored on the card may be corrupted.

To insert the memory card, open the Warning: Use only memory card holder as shown (1). batteries, chargers, and Place the memory card in the card enhancements approved by holder (2). Make sure that the Nokia for use with this memory card is properly inserted— particular model. The use of that it clicks into the holder—and any other types may that the gold-colored contact area invalidate any approval or on the card is facing upwards. Close warranty, and may be the memory card holder. dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall outlet.

You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in Gallery. To format the memory card, see 2. Connect the plug from the ”Format memory card” p. 50. charger into the CA-44 charging adapter (not provided with the ■ phone), and the adapter plug into Charge the battery the jack on the bottom of your Check the model number of any phone. charger before use with this device. If the battery is completely This device is intended for use when discharged, it may take a few supplied with power from the AC-4, minutes before the charging AC-1, AC-3, or DC-4 charger. indicator appears on the display or before any calls can be made.

The charging time depends on the Set the time, time zone, and charger and the battery used. For date example, charging a BP-6M Li-Ion Enter the local time, select the time battery with the AC-4 charger takes zone of your location in terms of the about 1 hour and 55 minutes while time difference with respect to the phone is in the standby mode. Greenwich Mean Time (GMT), and enter the date. See ”Time and date” ■ Switch the phone on p. 37. and off Warning: Do not switch the Plug and play service phone on when wireless When you switch on your phone for phone use is prohibited or the first time, and the phone is in the when it may cause standby mode, you may be asked to interference or danger. get the configuration settings from Press and hold the power key as your service provider (network shown. service). Confirm or decline the query. See Connect to serv. support in ”Configuration” p. 46 and ”Configuration settings service” p. xi.

■ Normal operating position Use the phone only in its normal operating position. If the phone asks for a PIN or UPIN Your device has an internal antenna. code, enter the code, and select OK. Note: As with any other You can switch on the phone in radio transmitting device, demo mode without a SIM card do not touch the antenna inserted. In this mode, all bearer- unnecessarily when the independent features are available, device is switched on. and you can make emergency calls. Contact with the antenna affects call quality and may cause the device to operate

4Copyright © 2007 Nokia. All rights reserved. Get started at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

■ Keys and parts

• Push to talk key (8) • Loudspeaker (9) • Memory card slot (10) • Charger connector (11) • Enhancements connector (12)

•Power key (1) • Earpiece (2) • Left, middle, and right selection keys (3) • End key (4) • 4-way navigation key (5) • Call key (6) • Number keys (7)

• Volume keys (13) • Infrared (IR) port (14) • Camera lens (15) • Camera key (16)

■ Standby mode • The right selection key (10) may be Names to access the list of When the phone is ready for use, and contacts in the Contacts menu, you have not entered any characters, an operator-specific name to the phone is in the standby mode. access an operator-specific Web site, or a shortcut to a function that you selected. See ”Right selection key” p. 38.

Active standby

• 3G indicator (1) • Signal strength of the cellular network (2) • Battery charge level (3) • Indicators (4) • The name of the network or the operator logo (5) In the active standby mode, the • Clock (6) phone can display separate content • Display (7) item windows, such as shortcuts (1), • The left selection key (8) is Go to audio functions (2), the calendar (3), or a shortcut to another function. and a user note (4). To select See ”Left selection key” p. 38. whether active standby is shown, see Active standby in ”Standby settings” • The middle selection key (9) mode p. 36. is Menu.

When active standby is idle, to My note — To enter a note, select the access the menu structure, select content window, write your note, Menu (5). To access the features in and save it. active standby, press the navigation Countdown timer — To start the key up or down. countdown timer, select the content To change the key to access the item. The remaining time with a note navigation mode, see Enabling is shown. active standby in ”Standby settings” General indicators — To show p. 36. When the arrow indicators (6) standby indicators, such as date, cell are shown, you can scroll the item info display, info messages, PTT left and right. default group name and closed user Content items in the group index. The date is shown if the navigation mode calendar is not selected as active Shortcut bar — To select a shortcut, standby content. scroll to the desired function, using left/right navigation key, and select Standby mode shortcuts it. • To access the list of dialed To change or organize the shortcuts numbers, press the call key once. when in the navigation mode, select See ”Make a voice call” p. 11. Options > Active standby > My • To call your voice mailbox active standby > Options > (network service) when you have Personalise > Options > Select links saved your voice mailbox number or Organise links. in the phone, press and hold 1. Audio applications — To switch on • To access video mail numbers, the radio or the music player, scroll press and hold 2. to and select it. To change a track in • To connect to a browser service, the music player or a channel in the press and hold 0. radio, scroll left or right. To start the radio channel search, scroll and hold • To set shortcut functions for the left or right. navigation key, see Navigation key in ”My shortcuts” p. 38. Calendar — To view today’s notes, select the desired one. To view the • To change the profile, briefly notes for the previous or next days, press the power key to open the scroll left or right. list of profiles. Scroll to the desired profile, and select it.

Power saver The stopwatch is running in the background. To set the power saving function On, see Power saver in ”Display” p. 36. / The phone is registered to a GPRS, EGPRS, or WCDMA Indicators network. You have unread messages / A packet data connection is in the Inbox folder. established. You have unsent, canceled, / The packet data connection or failed messages in the is suspended (on hold), for Outbox folder. example, if there is an incoming or outgoing call The phone registered a during a packet data dial-up missed call. connection. / Your phone is connected to When the infrared the instant messaging connection is activated, the service, and the availability indicator is shown status is online or offline. continuously. You received one or several A Bluetooth connection is instant messages, and you active. are connected to the instant messaging service. If you have two phone lines, the second phone line is The keypad is locked. selected. The phone does not ring for All incoming calls are an incoming call or text diverted to another number. message. See also ”Tones” p. 36. The loudspeaker is activated, or the music stand is The alarm clock is set to On. connected to the phone. The countdown timer is Calls are limited to a closed running. user group.

The timed profile is selected.

, , , or A headset, handsfree, loopset, or music stand enhancement is connected to the phone. or A push to talk connection is active or suspended.

■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad; or select Lock. To unlock the keypad select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, select Unlock, press *, and enter the security code. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see ”Phone” p. 45. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

■ Make a voice call Speed dialing 1. Enter the phone number, Assign a phone number to one of the including the area code. speed-dialing keys, 3 to 9. See For international calls, press * ”Speed dials” p. 33. Call the number twice for the international prefix in either of the following ways: (the + character replaces the • Press the speed-dialing key, then international access code), enter the call key. the country code, the area code •If Speed dialling is set to On, without the leading 0, if press and hold a speed-dialing necessary, and the phone key until the call begins. See number. ”Call” p. 44. 2. To call the number, press the call key. Enhanced voice dialing 3. To end the call, or to cancel the To make a phone call, select and hold call attempt, press the end key. the right selection key, and say the To search for a name or phone name of the contact you wish to call. number that you have saved in The phone will automatically Contacts, see ”Search for a contact” associate a virtual voice tag with p. 31. Press the call key to call the each contact in the phone memory. number. Make a voice dialing call To access the list of phone numbers If an application is sending or you have most recently called or receiving data using a packet data attempted to call, in the standby connection, end the application mode, press the call key once. To call before you use voice dialing in GSM. the number, scroll to the number or In WCDMA it is possible to send name you want, and press the call voice and data simultaneously. key. Voice commands are language- dependent. To set the language, see Voice playback language in ”Phone” p. 45.

Note: Using voice tags may To mute the ringing tone before you be difficult in a noisy answer the call, select Silence. environment or during an To end the call or reject a call, press emergency, so you should the end key. not rely solely upon voice dialing in all circumstances. Call waiting 1. In the standby mode, press and During a call, to answer the waiting hold the right selection key. A call, press the call key. The first call is short tone is played, and Speak put on hold. To end the active call, now is displayed. press the end key. If you are using a compatible To activate the Call waiting function, headset with the headset key, see ”Call” p. 44. press and hold the headset key to start the voice dialing. ■ Options during a voice 2. Say the voice command clearly. If the voice recognition is call successful, a list with matches is Many of the options that you use shown. The phone plays the voice during a call are network services. command of the match on the For availability, contact your top of the list. After about network operator or service provider. 1.5 seconds, the phone dials the Call options are Mute or Unmute, number; or if the result is not the Contacts, Menu, Lock keypad, correct one, scroll to another Record, Loudspeaker, or Handset. entry, and select to dial the entry. Network services options are Using voice commands to carry Answer, Reject, Hold or Unhold, New out a selected phone function is call, Add to conference, End call, End similar to voice dialing. See Voice all calls, and the following: commands in ”My shortcuts” Send DTMF — to send tone strings. p. 38. Swap — to switch between the active call and the call on hold. ■ Answer or reject a voice call Transfer — to connect a call on hold to an active call and disconnect To answer a call, press the call key. yourself.

Conference — to make a conference 2. Press and hold the call key, or call that allows up to five persons to select Contacts > Video call. take part in a conference call. Starting a video call may take a Private call — to discuss privately in while. Video call and an outgoing a conference call. animation is shown. If the call is not successful (for example, Warning: Do not hold the video calls are not supported by device near your ear when the network, or the receiving the loudspeaker is in use, device is not compatible) you are because the volume may be asked if you want to try a normal extremely loud. call or send a message instead. ■ Tip: To increase or Make a video call decrease the volume When you make a video call, you during a call, press the send a real-time video to the volume keys. recipient of the call. The video image The video call is active when you captured by the camera on the back can see two video images and of your phone is shown to the video hear the sound through the call recipient. This phone does not loudspeaker. The call recipient have a front camera. may deny the video sending, in To be able to make a video call, you which case you may see a still must have a USIM card and be image or a grey background connected in a WCDMA network. For graphic. You will hear the sound. availability of and subscription to 3. To end the call, press the end key. video call services, contact your network operator or service provider. ■ A video call can only be made Answer or reject a between two parties. The video call video call can be made to a compatible phone When a video call arrives, Video Call or an ISDN client. Video calls cannot is displayed. be made while another voice, video, 1. Press the call key to answer the or data call is active. video call. Allow video image to 1. To start a video call, enter the be sent to caller? is displayed. phone number in the standby mode, or select Contacts and a contact.

If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select No, or do nothing, video sending is not activated, and you hear a sound. A graphic is displayed on top of the video, indicating that it is not sent. You can enable or disable video sending at any time during the video call. 2. To end the video call, press the end key. Even when you deny video sending during a video call, the call is still charged as a video call. Check the pricing with your network operator or service provider.

■ Options during a video call Select Options during a video call for the following options: Set contrast, Video motion, Switch to voice call, End call, Send DTMF, and Loudspeaker.

To enter text (for example, when ■ Predictive text input writing messages), use traditional or Predictive text input allows you to predictive text input. To use write text quickly using the phone traditional text input, press a keypad and a built-in dictionary. number key, 1 to 9, repeatedly until the desired character appears. In 1. To start writing a word, use the 2 predictive text input you can enter a to 9 keys. Press each key only letter with a single keypress. once for one letter. The phone displays * or the letter if it When you write text, or separately has a meaning as a appears at the top left of the display, word. The entered letters are indicating predictive text input, and displayed underlined. appears, indicating traditional text input. , , or To insert a special character, appears next to the text input press and hold *, or select indicator, indicating the character Options > Insert symbol. Scroll to case. To change the character case, a character, and select Use. press #. indicates number 2. When you finish writing the word mode. To change from the letter to and it is correct, to confirm it, number mode, press and hold #, and press 0 to add space. select Number mode. If the word is not correct, press * repeatedly, or select Options > ■ Settings Matches. When the word that To set the writing language while you want appears, select Use. writing text, select Options > If the ? character is displayed Writing language. after the word, the word you To set predictive text input on or intended to write is not in the revert to traditional text input, dictionary. To add the word to the select Prediction on or Prediction off. dictionary, select Spell. Complete the word (traditional text input is Tip: To quickly set predictive used), and select Save. text input on or off when writing text, press # twice, or select and hold Options.

■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters that are available depend on the selected writing language. See ”Settings” p. 15. If the next letter you want is located on the same key as the present one, wait until the cursor appears; or briefly press any of the navigation keys, and enter the letter. The most common punctuation marks and special characters are available under the 1 key. For more characters, press *.

The phone offers you an extensive 4. If the selected menu contains range of functions, that are grouped further submenus, repeat step 3. into menus. 5. Select the setting of your choice. 1. To access the menu, select Menu. 6. To return to the previous menu To change the menu view, select level, select Back. To exit the Options > Main menu view > menu, select Exit. List, Grid, Grid with labels or Tab. The menus, submenus, and setting To rearrange the menu, scroll to options are numbered. To access the menu you want to move, and some of them, use their shortcut select Options > Organise > number. Move. Scroll to where you want To access the menu, select Menu. to move the menu, and select OK. Enter quickly, within 2 seconds, the To save the change, select shortcut number of the menu Done > Yes. function you want to access. To 2. Scroll through the menu, and access the menu functions in menu select an option (for example, level 1, enter 0 and 1. Settings). 3. If the selected menu contains further submenus, select the one that you want (for example, Call).

You can read, write, send, and save At the top of the display, you can see text, multimedia, e-mail, audio, and the message length indicator flash messages. All messages are counting backwards from the organized into folders. maximum number of characters supported by the phone. ■ Text messages (SMS) With the short message service Write and send SMS (SMS) you can send and receive text messages messages (network service). 1. Select Menu > Messaging > Before you can send any text or SMS Create message > Text message. e-mail message, you must save your 2. Enter the recipient’s phone message center number. See number in the To: field. To ”Message settings” p. 27. retrieve a phone number from To check SMS e-mail service Contacts, select Add > Contact. availability and to subscribe to the To send the message to multiple service, contact your service recipients, add the desired provider. To save an e-mail address contacts one by one. Scroll right in Contacts, see ”Save numbers and to add new contacts manually in text items” p. 31. the To: field. To send the message to persons in a group, select Your device supports the sending of Contact group and the desired text messages beyond the character group. To retrieve the contacts to limit for a single message. Longer which you recently sent messages is sent as a series of two or messages, select Add > Recently more messages. Your service used. provider may charge accordingly. Characters that use accents or other 3. Scroll down, and write your marks, and characters from some message in the Message: field. language options like Chinese, take See ”Write text” p. 15. up more space limiting the number To insert a template into the of characters that can be sent in a message, select Options > Use single message. template.

4. To send the message, select Scroll down, and write your Send; or press the call key. See message in the Message: field. ”Send a message” p. 21. See ”Write text” p. 15. If you want to change the Read and reply to an SMS message type for your reply message message, select Options > 1 message received or the number of Change message type. new messages with messages 4. To send the message, select received are shown when you have Send; or press the call key. received a message. 1. To view a new message, select ■ SIM messages Show. To view it later, select Exit. SIM messages are text messages To read the message later, select that are saved to your SIM card. You Menu > Messaging > Inbox. If can copy or move those messages to more than one message is the phone memory, but not vice received, select the message you versa. Received messages are saved want to read. is shown if you to the phone memory. have unread messages in Inbox. To read SIM messages, select 2. To view the list of available Menu > Messaging > Options > options while reading a message, SIM messages. select Options. You can, for example, select to copy text from ■ Multimedia messages the beginning of a message to Note: Only devices that your phone calendar as a have compatible features reminder note. can receive and display 3. To reply to a message, select multimedia messages. The Reply > Text message, appearance of a message Multimedia, Flash message, or may vary depending on the Audio message. receiving device. To send a text message to an To check availability and to subscribe e-mail address, enter the e-mail to the multimedia messaging address in the To: field. network service, contact your network operator or service provider. See ”Multimedia message” p. 28.

A multimedia message can contain 1. Select Menu > Messaging > text, sound, pictures, video clips, a Create message > Multimedia. business card, and a calendar note. If 2. Enter your message. the message is too large, the phone Your phone supports multimedia may not be able to receive it. Some messages that contain several networks allow text messages that pages (slides). A message can include an Internet address where contain a calendar note and a you can view the multimedia business card as attachments. A message. slide can contain text, one image, Multimedia messaging supports the and one sound clip; or text and a following formats: video clip. To insert a slide in the • Picture: JPEG, GIF, animated GIF message, select New; or select and WBMP Options > Insert > Slide. • Sound: AMR audio To insert a file in the message, • Video clip: .3gp format with select Insert or Options > Insert. H.263 or MPEG video (QCIF You can fetch images and video resolution), WB or AMR audio clips from the Gallery, or to take • Other: vCard (Business card) and them directly from the viewfinder, vCalendar (Calendar note) select Options > Insert > New Image or New video clip. The phone may not support all variations of the file formats. 3. To view the message before sending it, select Options > You can receive multimedia Preview. messages during a call, another Java application, or an active browsing 4. To send the message, select session over WCDMA data. Send; or press the call key. See ”Send a message” p. 21. Write and send a multimedia 5. Enter the recipient’s phone message number in the To: field. To retrieve a phone number from The wireless network may limit the Contacts, select Add > Contact. size of MMS messages. If the To send the message to multiple inserted picture exceeds this limit, recipients, add the desired the device may make it smaller so contacts one by one. To send the that it can be sent by MMS. message to persons in a group,

select Contact group and the It takes more time to send a desired group. To retrieve the multimedia message than to send a contacts to which you recently text message. While the message is sent messages, select Add > being sent, you can use other Recently used. functions on the phone. If an interruption occurs while the Send a message message is being sent, the phone tries to resend the message a few Copyright protections may prevent times. If these attempts fail, the some images, music (including message remains in the Outbox ringing tones), and other content folder. You can try to resend it later. from being copied, modified, transferred, or forwarded. Cancel message sending When you finish writing your message, to send the message, select When the phone is saving a message Send, or press the call key. The phone in the Outbox folder, Sending saves the message in the Outbox message or Sending messages is folder, and sending starts. If you displayed. To cancel the text select Save sent messages > Yes, the message sending, select Cancel. sent message is saved in the Sent To cancel the sending of the items folder. See ”General” p. 27. multimedia messages in the Outbox Note: When the phone folder, scroll to the desired message, sends the message, the and select Options > Cancel animated is shown. This sending. is an indication that the message has been sent by Read and reply to a your device to the message multimedia message center number programmed Important: Exercise caution into your device. This is not when opening messages. an indication that the Multimedia message objects message has been received may contain malicious at the intended destination. software or otherwise be For more details about harmful to your device or PC. messaging services, check with your service provider.

Multimedia message received or the ■ Memory full number of new messages with When you are receiving a message, messages received is shown when and the memory for the messages is you receive a new multimedia full, Memory full. Unable to receive message. messages. is shown. To first delete 1. To read the message, select old messages, select OK > Yes and Show. To view it later, select Exit. the folder. Scroll to the desired To read the message later, select message, and select Delete. If one or Menu > Messaging > Inbox. more messages are marked, select Scroll to the message that you Mark. Mark all the messages you want to view, and select it. is want to delete, and select Options > shown if you have unread Delete marked. messages in Inbox. To free phone memory, delete 2. To view the whole message if the photos, ringing tones, or other data received message contains a in the phone memory. presentation, select Play. To view the files in the ■ Folders presentation or the attachments, The phone saves received messages select Options > Objects or in the Inbox folder. Attachments. Messages that have not yet been 3. To reply to the message, select sent are saved in the Outbox folder. Options > Reply > Text message, To set the phone to save the sent Multimedia, Flash message, or messages in the Sent items folder, Audio message. Write the reply see Save sent messages in ”General” message. p. 27. If you want to change the To view the message you saved while message type for your reply writing and want to send later, message, select Options > select Menu > Messaging > Drafts. Change message type. The new message type may not support all You can move your messages to the the content that you have added. Saved items folder. To organize your Saved items subfolders, select 4. To send the message, select Menu > Messaging > Saved items > Send; or press the call key. See Saved messages or a folder that you ”Send a message” p. 21. add. To add a new folder for your

22 Copyright © 2007 Nokia. All rights reserved. Messaging messages, select Options > Add from the current message, select folder. To delete or rename a folder, Options > Use detail. scroll to the desired folder, and select Options > Delete folder or ■ Audio messages Rename folder. With this menu, use the multimedia Your phone has templates. To create message service to create and send a a new template, save or copy a voice message in a convenient way. message as a template. To access the Multimedia messaging service must template list, select Menu > be activated before you can use Messaging > Saved items > audio messages. Templates. ■ Create an audio message Flash messages 1. Select Menu > Messaging > Flash messages are text messages Create message > Audio that are instantly displayed upon message. The recorder opens. To reception. Flash messages are not use the recorder, see ”Voice automatically saved. recorder” p. 56. 2. To view the available options, Write a flash message select Options. Select Menu > Messaging > Create 3. Enter the recipient’s phone message > Flash message. Enter the number in the To: field. To recipient’s phone number in the To: retrieve a phone number from field. Write your message in the Contacts, select Add > Contact. Message: field. The maximum length To send the message to multiple of a flash message is 70 characters. recipients, add the desired To send the message, select Send. contacts one by one. To send the message to persons in a group, Receive a flash message select Contact group and the A received flash message is indicated desired group. To retrieve the with Message: and a few words from contacts to which you recently the beginning of the message. To sent messages, select Add > read the message, select Read. To Recently used. extract phone numbers, e-mail 4. To send the message, select Send. addresses, and Web site addresses

Receive an audio message • Check your e-mail settings with When your phone receives audio your network operator or e-mail messages, the number of messages service provider. You may receive and the text messages received is the e-mail configuration settings shown. To open the message, select as a configuration message. See Play; or if more than one message is ”Configuration settings service” received, select Show > Play. To p. xi. You can also enter the listen to the message later, select settings manually. See Exit. Select Options to see the ”Configuration” p. 46. available options. To activate the e-mail settings, select Menu > Messaging > ■ E-mail application Message settings > E-mail messages. See ”E-mail” p. 29. The e-mail application uses a packet data connection (network service) to This application does not support allow you to access your e-mail keypad tones. account from your phone when you are not in the office or at home. This Settings Wizard e-mail application is different from The settings wizard will start the SMS e-mail function. To use the automatically if no e-mail settings e-mail function on your phone, you are defined in the phone. To enter need a compatible e-mail system. the settings manually, select You can write, send, and read e-mail Menu > Messaging > E-mail > with your phone. You can also save Options > Manage accounts > and delete the e-mail on a Options > New. compatible PC. Your phone supports The Manage accounts options allow POP3 and IMAP4 e-mail servers. you to add, delete, and change the Before you can send and retrieve any e-mail settings. Make sure that you e-mail messages, you must do the have defined the correct preferred following: access point for your operator. See ”Configuration” p. 46. • Obtain a new e-mail account or The e-mail application requires an use your current account. To Internet access point without a check the availability of your proxy. WAP access points normally e-mail account, contact your include a proxy and do not work with e-mail service provider. the e-mail application.

Write and send an e-mail Options > Send now or Send and You can write your e-mail message check for e-mail. before connecting to the e-mail service; or connect to the service Download e-mail first, then write and send your 1. To download e-mail messages e-mail. that have been sent to your 1. Select Menu > Messaging > e-mail account, select Menu > E-mail > Write new e-mail. Messaging > E-mail > Check for new e-mail. 2. If more than one e-mail account is defined, select the account If more than one e-mail account from which you want to send the is defined, select the account e-mail. from which you want to download the e-mail. 3. Enter the recipient’s e-mail address. The e-mail application only downloads e-mail headers at 4. Write a subject for the e-mail. first. 5. Write the e-mail message. See 2. Select Back. ”Write text” p. 15. 3. Select Inboxes, the account To attach a file to the e-mail, name, and the new message, and select Options > Attach file and select Retrieve to download the a file from Gallery. complete e-mail message. 6. To send the e-mail message To download new e-mail messages immediately, select Send > Send and to send e-mail that has been now. saved in the Outbox folder, select To save the e-mail in the Outbox Options > Send and check for e-mail. folder to be sent later, select Send > Send later. Read and reply to e-mail To edit or continue writing your Important: Exercise caution e-mail later, select Options > when opening messages. Save as draft. The e-mail is saved E-mail messages may in Outboxes > Drafts. contain malicious software To send the e-mail later, select or otherwise be harmful to Menu > Messaging > E-mail > your device or PC.

1. Select Menu > Messaging > Spam filter E-mail > Inboxes, the account The e-mail application allows you to name, and the desired message. activate a built-in spam filter. To 2. While reading the message, activate and define this filter, select select Options to view the Options > Spam filter > Settings in available options. the main e-mail idle screen. The 3. To reply to an e-mail, select spam filter allows the user to put Reply > Original text or Empty specific senders on a black or white message. To reply to many, select list. Black list sender messages are Options > Reply to all. Confirm or filtered to the Junk folder. Unknown edit the e-mail address and and White list sender messages are subject, then write your reply. downloaded into the account inbox. To blacklist a sender, select the 4. To send the message, select e-mail message in the Inboxes folder Send > Send now. and Options > Blacklist sender. E-mail folders ■ Voice messages Your phone saves e-mail that you have downloaded from your e-mail The voice mailbox is a network account in the Inboxes folder. The service, and you may need to Inboxes folder contains the subscribe to it. For more information following folders: “Account name” and for your voice mailbox number, for incoming e-mail, Archive for contact your service provider. archiving e-mail, Custom 1—Custom To call your voice mailbox, select 3 for sorting e-mail, Junk where all Menu > Messaging > Voice spam e-mail is stored. The Outboxes messages > Listen to voice messages. folder contains the following To enter, find, or edit your voice folders: Drafts for saving unfinished mailbox number, select Voice e-mail, Outbox for saving e-mail mailbox number. that has not been sent, and Sent If supported by the network, items for saving e-mail that has indicates new voice messages. To been sent. call your voice mailbox number, To manage the folders and their select Listen. e-mail content, select Options to view the available options of each folder.

■ Info messages To delete all messages from all folders, select Menu > Messaging > With the Info messages network Delete messages > All messages > service, you can receive messages on Yes. various topics from your service provider. To check availability, topics, and the relevant topic numbers, ■ Message settings contact your service provider. General ■ Service commands General settings are common for Select Menu > Messaging > Service text and multimedia messages. commands. Write and send service Select Menu > Messaging > requests (also known as USSD Message settings > General settings commands), such as activation and from the following options: commands for network services, to Save sent messages > Yes — to set your service provider. the phone to save the sent messages in the Sent items folder. ■ Delete messages Overwriting in sent items — to select To delete messages one by one, whether overwriting is allowed select Menu > Messaging > Delete when messages are sent and the messages > By message and the memory is full. folder from which you want to Font size — to select the font size delete messages. Scroll to the used in messages. desired message, and select Delete. Graphical smileys > Yes — to set the To mark more than one message, phone to replace character-based select Options > Mark. Mark all the smileys with graphical ones. messages you want to delete, and select Options > Delete marked. Text message and SMS To delete all messages from a folder, e-mail select Menu > Messaging > Delete messages > By folder and the folder The text message settings affect the to delete. Depending on the folder, sending, receiving, and viewing of the phone asks if you want to delete messages. the messages.

Select Menu > Messaging > Character support > Full — to select Message settings > Text messages all characters in the messages to be and from the following options: sent as viewed. Delivery reports > Yes — to ask the Reply via same centre > Yes — to network to send delivery reports allow the recipient of your message about your messages (network to send you a reply using your service). message center (network service). Message centres > Add centre — to set the phone number and name of Multimedia message the message center that is required The message settings affect the for sending text messages. You sending, receiving, and viewing of receive this number from your multimedia messages. service provider. If you select SIM You may receive the configuration message centre, you can view the settings for multimedia messaging SIM message center information. as a configuration message. See Message centre in use — to select the ”Configuration settings service” message center in use. p. xi. You can also enter the settings E-mail message centres > Add centre manually. See ”Configuration” p. 46. — to set the phone numbers and Select Menu > Messaging > name of the e-mail center for Message settings > Multimedia sending SMS e-mail. If you select messages and from the following SIM e-mail centre, you can view the options: SIM e-mail center information. Delivery reports > Yes — to ask the E-mail centre in use — to select the network to send delivery reports SMS e-mail message center in use. about your messages (network Message validity — to select the service). length of time for which the network Image size (multimedia) — to define attempts to deliver your message. the default image size used in Messages sent via — to select the multimedia messages. format of the messages to be sent: Default slide timing — to define the Text, Paging, or Fax (network service). default time between slides in Use packet data > Yes — to set GPRS multimedia messages. or WCDMA as the preferred SMS bearer.

Allow multimedia recept. — to E-mail receive or block the multimedia The settings affect the sending, message, select Yes or No. If you receiving, and viewing of e-mail. select In home network, you cannot receive multimedia messages when You may receive the configuration you are outside your home network. settings for the e-mail application as The default setting of the a configuration message. See multimedia message service is ”Configuration settings service” generally In home network. p. xi. You can also enter the settings manually. See ”Configuration” p. 46. Incoming multim. msgs. — to allow the reception of multimedia To activate the settings for the messages automatically, manually e-mail application, select Menu > after being prompted, or to reject Messaging > Message settings > the reception. This setting is not E-mail messages and from the shown if Allow multimedia recept. is following options: set to No. Configuration — Select the set that Allow adverts — to receive or reject you want to activate. advertisements. This setting is not Account — Select an account shown if Allow multimedia recept. is provided by the service provider. set to No, or Incoming multim. msgs. My name — Enter your name or is set to Reject. nickname. Configuration settings > E-mail address — Enter your e-mail Configuration — only the address. configurations that support Include signature — You can define a multimedia messaging are shown. signature that is automatically Select a service provider, Default, or added to the end of your e-mail Personal configuration for when you write your message. multimedia messaging. Select Account and a multimedia Reply-to address — Enter the e-mail messaging service account address to which you want the contained in the active replies to be sent. configuration settings. SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail. Display terminal window — Select Yes to perform manual user authentication for intranet connections. Incoming server type — Select POP3 or IMAP4, depending on the type of e-mail system that you are using. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4.

You can save names and phone new contact. Enter the last name, numbers (contacts) in the phone first name, and the phone number. memory and in the SIM card memory. ■ Save numbers and text The phone memory may save items contacts with additional details, In the phone memory for contacts such as various phone numbers and you can save different types of text items. You can also save an phone numbers and short text items image or a video clip for a limited per name. number of contacts. You can also use the video clip saved with a contact The first number you save is as a ringing tone for the contact. automatically set as the default number, and it is indicated with a The SIM card memory can save frame around the number type names with one phone number indicator (for example, ). When attached to them. The contacts you select a name from contacts (for saved in the SIM card memory are example, to make a call), the default indicated by . number is used unless you select another number. ■ Search for a contact 1. Make sure that the memory in Select Menu > Contacts > Names. use is Phone or Phone and SIM. Scroll through the list of contacts, or 2. Search for the contact to which enter the first characters of the you want to add a new number or name. text item, and select Details > Options > Add detail. ■ Save names and phone 3. To add a number, select Number numbers and a number type. Names and numbers are saved in the To add another detail, select a used memory. To save a name and text type, an image or a video clip phone number, select Menu > from Gallery, or a new image. Contacts > Names > Options > Add

To search for an ID from the Edit. You cannot edit an ID when it is server of your service provider if on the IM contacts list. you have connected to the presence service, select User ID > ■ Delete contacts Search. If only one ID is found, it To delete all the contacts and the is automatically saved. details attached to them from the Otherwise, to save the ID, select phone or SIM card memory, select Options > Save. To enter the ID, Menu > Contacts > Delete all select Enter ID manually. Enter contacts > From phone memory or the ID, and select OK to save it. From SIM card. Confirm with the To change the number type, scroll security code. to the desired number, and select To delete a contact, search for the Options > Change type. To set desired contact, and select the selected number as the Options > Delete contact. default number, select Set as default. To delete a number, text item, or an image attached to the contact, 4. Enter the number or text item; to search for the contact, and select save it, select Save. Details. Scroll to the desired detail, ■ and select Options > Delete > Copy contacts Delete number, Delete detail, or Search for the contact you want to Delete image. Deleting an image copy, and select Options > Copy. from contacts does not delete it You can copy names and phone from Gallery. numbers from the phone contact memory to the SIM card memory, or ■ Business cards vice versa. The SIM card memory can You can send and receive a person’s save names with one phone number contact information from a attached to them. compatible device that supports the vCard standard as a business card. ■ Edit contact details To send a business card, search for Search for the contact you want to the contact whose information you edit, and select Details. To edit a want to send, and select Details > name, number, text item, or to Options > Send business card > Via change the image, select Options >

32 Copyright © 2007 Nokia. All rights reserved. Contacts multimedia, Via text message, Via caller groups with different ringing infrared, or Via Bluetooth. tones and group images. When you receive a business card, select Show > Save to save the ■ Speed dials business card in the phone memory. To assign a number to a speed- To discard the business card, select dialing key, select Menu > Contacts Exit > Yes. > Speed dials, and scroll to the speed-dialing number that you ■ Settings want. Select Menu > Contacts > Settings Select Assign, or if a number has and from the following options: already been assigned to the key, Memory in use — to select the SIM select Options > Change. Select card or phone memory for your Search and the contact you want to contacts. Select Phone and SIM to assign. If the Speed dialling function recall names and numbers from both is off, the phone asks whether you memories. In that case, when you want to activate it. See also Speed save names and numbers, they are dialling in ”Call” p. 44. saved in the phone memory. To make a call using the speed- Contacts view — to select how the dialing keys, see ”Speed dialing” names and numbers in Contacts are p. 11. displayed ■ Name display — to select whether Service and my the contact’s first or last name is numbers displayed first Select Menu > Contacts and from Font size — to set the font size for the following options: the list of contacts Service numbers — to call the service Memory status — to view the free numbers of your service provider if and used memory capacity the numbers are included on your SIM card (network service) ■ Groups My numbers — to view the phone numbers assigned to your SIM card. Select Menu > Contacts > Groups to This is only shown if the numbers are arrange the names and phone included on your SIM card. numbers saved in the memory into

To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer. To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Note: Some timers, including the life timer, may be reset during service or software upgrades.

■ Profiles Select Settings > Profiles > Flight and from the following options: Your phone has various setting Activate or Personalise. groups, called profiles, which you can customize for different events To deactivate the flight mode, you and environments. scroll to and select any other profile. Every time you try to make a call, Select Menu > Settings > Profiles you are asked if you want to Exit and the desired profile. Select from flight profile? click Yes to deactivate the following options: Flight mode. Activate — to activate the selected In the flight mode you can make an profile emergency call. Enter the emergency Personalise — to personalize the number, press the call key, and select profile. Select the setting you want Yes when asked Exit flight profile? to change, and make the changes. The phone attempts to make an Timed — to set the profile to be emergency call. active until a certain time up to 24 When the emergency call ends, the hours, and set the end time. When phone automatically enters the the time set for the profile expires, general profile mode. the previous profile that was not timed becomes active. ■ Themes Flight mode A theme contains many elements for personalizing your phone, such as You can deactivate all radio wallpaper, screen saver, color frequency functionality and still scheme, and a ringing tone. have access to games, calendar and phonebook. Use flight mode in radio Select Menu > Settings > Themes sensitive environments—on board and from the following options: airplanes or in hospitals. When the Select theme — to set a theme in flight mode is active, the flight icon your phone. A list of folders in is visible next to the battery charge Gallery opens. Open the Themes level. folder, and select a theme.

Theme downloads — to open a list of To disable the active standby mode, links to download more themes select Menu > Settings > Display > Standby mode settings > Active ■ Tones standby > Off. You can change the settings of the selected active profile. Standby settings Select Menu > Settings > Tones > Select Menu > Settings > Display > Incoming call alert, Ringing tone, Standby mode settings and from the Ringing volume, Vibrating alert, Push following options: to talk settings, Message alert tone, Active standby > My active standby Instant msg. alert tone, Keypad — to display the active standby. tones, or Warning tones. You can Select Options and from the find the same settings in the Profiles following options: menu. • Personalise — to change the To set the phone to ring only upon content on the display calls from phone numbers that • Organise — to reorganize the belong to a selected caller group, content on the display select Alert for. Scroll to the caller • Enabling active standby — to group you want or All calls, and change the key for accessing the select Mark. navigation mode. The same setting is also in the My shortcuts ■ Display menu. See ”Enable active With display settings you can standby” p. 38. personalize your phone display view. Wallpaper — to set your phone to display an image or a slide as Standby mode wallpaper when the phone is in the standby mode. Select Wallpapers > Enable or disable active Image or Slide set. Select an image standby from idle or a slide from Gallery, and To enable the active standby mode, Options > Set as wallpaper. To select Menu > Settings > Display > download more graphics, select Standby mode settings > Active Graphic downloads. standby > My active standby.

Standby font colour — to select the Sleep mode color for the texts on the display in To save most battery power, select the standby mode Menu > Settings > Display > Sleep Navigation key icons — to set the mode. The display turns completely scroll key icons that are shown in the black when no function of the phone standby mode is used for a certain time. Operator logo — to set your phone to display or hide the operator logo Font size Cell info display > On — to receive To set the font size for reading and information from the network writing messages and viewing operator depending on the network contacts and Web pages, select cell used (network service) Menu > Settings > Display > Font size. Screen saver To select a screen saver from Gallery, ■ Time and date select Menu > Settings > Display > To change the time, time zone, and Screen saver > Screen savers > date settings, select Menu > Image, Slide set, Video clip, or Open Settings > Time and date > Clock, camera. To download more screen Date, or Auto-update of date/time savers, select Graphic downloads. To (network service). select the time after which the When traveling to a different time screen saver is activated, select zone, select Menu > Settings > Time Time-out. To activate the screen and date > Clock > Time zone and saver, select On. the time zone of your location in terms of the time difference with Power saver respect to Greenwich Mean Time To save some battery power, select (GMT) or Universal Time Coordinated Menu > Settings > Display > Power (UTC). The time and date are set saver. A digital clock is displayed according to the time zone and when no function of the phone is enable your phone to display the used for a certain time. correct sending time of received text or multimedia messages. For example, GMT-5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK).

Use for India (New Delhi) GMT +5.5, Right selection key for Thailand/Indonesia/Vietnam To select a function from the list for GMT +7, for Singapore/Malaysia/ the right selection key, select Philippines GMT +8, for Australia Menu > Settings > My shortcuts > (Sydney) GMT +10, and for New Right selection key. See also Zealand GMT +12. ”Standby mode” p. 7. ■ My shortcuts Navigation key With personal shortcuts you get To select shortcut functions for the quick access to often used functions scroll keys, select Menu > Settings > of the phone. My shortcuts > Navigation key. Scroll to the desired key and select Left selection key Change and a function from the list. To select a function from the list for To remove a shortcut function from the left selection key, select Menu > the key, select (empty). To reassign a Settings > My shortcuts > Left function for the key, select Assign. selection key. See also ”Standby See ”Standby mode shortcuts” p. 8. mode” p. 7. To activate a function in the standby Enable active standby mode if the left selection key is Go To select the key to access the active to, select Go to and the desired standby navigation mode, select function on your personal shortcut Menu > Settings > My shortcuts > list. Select Options and from the Enabling active standby > following options: Navigation key up, Navigation key Select options — to add a function to down, or Navigation key up/down. the shortcut list, or to remove one. Scroll to the function, and select Voice commands Mark or Unmark. You can call contacts and carry out Organise — to rearrange the phone functions by saying voice functions on your personal shortcut commands. Voice commands are list. Scroll to the function you want language-dependent. To set the to move, and select Move. Scroll to language, see Voice playback where you want to move the language in ”Phone” p. 45. function, and select OK.

The phone voice commands are Bluetooth wireless active by default. Select Menu > technology Settings > My shortcuts > Voice This device is compliant with commands and a folder. Scroll to a Bluetooth Specification 2.0 function. indicates that the voice supporting the following profiles: tag is activated. To play the hands-free, headset, object push activated voice command, select profile, file transfer profile, dial-up Play. To use voice commands, see networking profile, SIM access ”Enhanced voice dialing” p. 11. profile, and serial port profile. To To manage the voice commands, ensure interoperability between scroll to a phone function, and select other devices supporting Bluetooth from the following options: technology, use Nokia approved Edit or Remove — to change or enhancements for this model. Check deactivate the voice command of with the manufacturers of other the selected function. When you edit devices to determine their the voice tag text, the phone compatibility with this device. associates it to a new virtual voice There may be restrictions on using tag. Bluetooth technology in some Add all or Remove all — to activate or locations. Check with your local deactivate voice commands to all authorities or service provider. functions in the voice commands Features using Bluetooth list. Add all or Remove all is not technology, or allowing such shown if all voice commands are features to run in the background active or inactive. while using other features, increase the demand on battery power and ■ Connectivity reduce the battery life. You can connect the phone to a Bluetooth technology allows you to compatible device using an infrared, connect the phone to a compatible Bluetooth wireless technology, or Bluetooth device within 10 meters USB data cable (CA-53 or DKU-2) (32 feet). Since devices using connection. You can also define the Bluetooth technology communicate settings for packet data dial-up using radio waves, your phone and connections. the other devices do not need to be in direct line-of-sight, although the connection can be subject to

Copyright © 2007 Nokia. All rights reserved. 39 Settings interference from obstructions such Bluetooth wireless as walls or from other electronic connection devices. Select Menu > Settings > Connectivity > Bluetooth. To check Set up a Bluetooth which Bluetooth connection is connection currently active, select Active Select Menu > Settings > devices. To view a list of Bluetooth Connectivity > Bluetooth and from devices that are currently paired the following options: with the phone, select Paired Bluetooth > On or Off — to activate devices. or deactivate the Bluetooth Select Options to access available function. indicates an active options depending on the status of Bluetooth connection. When the device and the Bluetooth activating Bluetooth technology for connection. Select Connect > Assign the first time, you are asked to give a short name or Auto-conn. without name for the phone. Please note that conf.. this name will be viewed by other people — use a unique name that is Bluetooth settings easy for others to identify. To define how your phone is shown Search for audio enhanc. — to search to other Bluetooth devices, select for compatible Bluetooth audio Menu > Settings > Connectivity > devices. Select the device that you Bluetooth > Bluetooth settings > want to connect to the phone. My phone's visibility or My phone's Paired devices — to search for any name. Bluetooth device in range. Select Operating the phone in hidden mode New to list any Bluetooth device in is a safer way to avoid malicious range. Scroll to a device, and select software. Pair. Enter the Bluetooth passcode Do not accept Bluetooth of the device to associate (pair) the connectivity from sources you do not device to your phone. You must only trust. give this passcode when you connect to the device for the first time. Your As another alternative, — switch off phone connects to the device, and the Bluetooth functionality. This will you can start data transfer. not affect other functionalities of the phone.

Infrared IR connection indicator You can send or receive data to or When is shown continuously, from a compatible phone or data the IR connection is activated, and device (for example, a computer) your phone is ready to send or through the infrared (IR) port of your receive data through its IR port. phone. To use an IR connection, the When blinks, your phone is device with which you want to trying to connect to the other establish a connection must be IrDA device, or a connection has been compliant. lost. Do not point the IR (infrared) beam at anyone's eye or allow it to Packet data interfere with other IR devices. This WCDMA and general packet radio device is a Class 1 laser product. service (GPRS) are network services When sending or receiving data, that allow mobile phones to send ensure that the IR ports of the and receive data over an Internet sending and receiving devices are protocol protocol (IP) based network. pointing at each other and that WCDMA and GPRS are data bearers there are no obstructions between that enable wireless access to data the devices. networks such as the Internet. To activate the IR port of your phone, Enhanced GPRS (EGPRS) is similar to select Menu > Settings > GPRS but enables faster Connectivity > Infrared. connections. For more information To deactivate the IR connection, on availability of EGPRS and data select Menu > Settings > transfer speed, contact your network Connectivity > Infrared. When the operator or service provider. phone displays Deactivate infrared?, The applications that may use select Yes. WCDMA or (E)GPRS are MMS, video If data transfer is not started within streaming, browsing sessions, 2 minutes after the activation of the e-mail, remote SyncML, Java IR port, the connection is canceled application downloading, and the PC and must be started again. dial-up.

When you have selected GPRS as a connection to a compatible PC and data bearer, the phone uses EGPRS use the phone as a modem to enable instead of GPRS if this is available in packet data connectivity from the the network. You cannot select PC. between EGPRS and GPRS, but for To define the settings for the packet some applications you may be able data connections from your PC, to select GPRS or GSM data (circuit select Menu > Settings > switched data, CSD). Connectivity > Packet data > Packet data settings > Active access point, Packet data connection and activate the access point you Select Menu > Settings > want to use. Select Edit active access Connectivity > Packet data > Packet point > Alias for access point, enter a data connection, and from the name to change the access point following options: settings, and select OK. Select Packet data access point, enter the Always online to set the phone to access point name (APN) to establish automatically register to a packet a connection to a network, and data network when you switch on select OK. the phone. or indicates that the packet data service is available. You can also set the packet data service settings (access point name) If you receive a call or a text on your PC using the Nokia Modem message, or make a call during a Options software. See ”Nokia PC packet data connection, or Suite” p. 78. If you have set the indicates that the packet data settings both on your PC and on your connection is suspended (on hold). phone, the PC settings are used. When needed to register and establish a packet data connection Data transfer when an application using packet data needs it, and to close the Synchronize your calendar, contacts connection when you end the data, and notes with another application. compatible device (for example, a mobile phone), a compatible PC, or a Packet data settings remote Internet server (network service). You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable

Partner list used. The other device is in the To copy or synchronize data from standby mode. your phone, the name of the device To start data transfer, select Menu > and the settings must be in the list Settings > Connectivity > Data of partners in transfer contacts. If transfer and the transfer partner from you receive data from another the list, other than Server device (for example, a compatible synchronisation or PC mobile phone), the partner is synchronisation. According to the automatically added to the list, settings, the selected data is copied using the contact data from the or synchronized. The other device also other device. Server synchronisation must be activated for receiving data. and PC synchronisation are the original items in the list. Data transfer without SIM To add a new partner to the list (for card example, a new device), select Your phone allows data transfer Menu > Settings > Connectivity > when the SIM card is not inserted. Data transfer > Options > Add Switch on your phone with no SIM transfer contact > Phone card inserted, and select Transfer synchronisation or Phone copy, and and from the following options: enter the settings according to the transfer type. Send data — to select a contact, other than Server synchronisation To edit the copy and synchronize and PC synchronisation, from the settings, select a contact from the partner list to transfer data from partner list and Options > Edit. your phone. The phone starts a To delete a partner, select a contact synchronization or copy session. from the partner list and Options > Receive data > Via Bluetooth or Via Delete, and confirm Delete transfer infrared — to receive data from the contact?. You cannot delete Server other phone. synchronisation or PC synchronisation. Synchronize from a Data transfer with a compatible PC compatible device Before you synchronize data from calendar, notes, and contacts from a For synchronization, Bluetooth compatible PC, you must install the wireless technology or infrared is

Nokia PC Suite software of your USB data cable phone on the PC. Use Bluetooth You can use the USB data cable to wireless technology, infrared, or a transfer data between the memory USB data cable for the card inserted in the phone and a synchronization, and start the compatible PC or a printer synchronization from the PC. supporting PictBridge. You can also use the USB data cable with Nokia Synchronize from a server PC Suite. To use a remote Internet server, you To activate the memory card for data must subscribe to a synchronization transfer or picture printing, connect service. For more information and the USB data cable; when the phone the settings required for this service, displays USB data cable connected. contact your service provider. You Select mode., select OK. Select from may receive the settings as a the following modes: configuration message. See Default mode — to use the cable for ”Configuration settings service” p. xi PC Suite. and ”Configuration” p. 46. To change the USB mode, select If you have saved data on the remote Menu > Settings > Connectivity > Internet server, to synchronize your USB data cable > Default mode, phone, start the synchronization Printing, or Data storage. from your phone. Select Menu > Settings > ■ Call Connectivity > Data transfer > Server synchronisation. Depending Select Menu > Settings > Call and on the settings, select Initialising from the following options: synchronisation or Initialising copy. Call divert — to divert your incoming If the contacts or calendar are full, calls (network service). You may not synchronizing for the first time or be able to divert your calls if some after an interrupted synchronization call barring functions are active. See may take up to 30 minutes to Call barring service in ”Security” complete. p. 47.

Anykey answer > On — to set the ■ Phone phone to answer an incoming call by Select Menu > Settings > Phone pressing any key except the power and from the following options: and end keys. Language settings — to set the Automatic redial > On — to make a display language of your phone, maximum of 10 attempts to connect select Phone language. If you select the call after an unsuccessful call Automatic, the phone selects the attempt. language according to the Video to voice auto-redial — to information on the SIM card. select whether the phone To select the USIM card language, automatically makes a voice call to select SIM language. the number to which a video call failed. To set a language for the voice playback, select Voice playback Speed dialling > On — to dial the language. See ”Make a voice dialing names and phone numbers assigned call” p. 11 and Voice commands in to the speed-dialing keys 3 to 9, ”My shortcuts” p. 38. press and hold the corresponding number key. Memory Status — to see how much of the phone’s memory is reserved Call waiting > Activate — to have and how much is free. the network notify you of an incoming call while you have a call Automatic keyguard — to set the in progress (network service). See keypad of your phone to lock ”Call waiting” p. 12. automatically after a preset time delay when the phone is in the Summary after call > On — to briefly standby mode and no function of the display the approximate duration phone has been used. Select On, and and cost (network service) of the call set the time. after each call. Security keyguard — to set the phone Send my caller ID > Yes — to show to ask for the security code when your phone number to the person you unlock the keyguard. Enter the you are calling (network service). To security code, and select On. use the setting agreed upon with your service provider, select Set by When the keyguard is on, calls still network. may be possible to the official emergency number programmed into your device.

Welcome note — to write the note Select Menu > Settings > you would like to be shown briefly Enhancements. Depending on the when the phone is switched on. enhancement, you can select some Network mode — to select dual mode of the following options: (UMTS and GSM), UMTS, or GSM. Default profile — to select the profile You cannot access this option during that you want to be automatically an active call. activated when you connect to the Operator selection > Automatic — to selected enhancement. set the phone to automatically Automatic answer — to set the select one of the cellular networks phone to answer an incoming call available in your area. With Manual automatically after 5 seconds. If you can select a network that has a Incoming call alert is set to Beep roaming agreement with your home once or Off, automatic answer is off. network operator. Confirm SIM serv. actions — See ”SIM ■ Configuration services” p. 77. You can configure your phone with Help text activation — to select settings that are required for certain whether the phone shows help texts. services to function correctly. The Start-up tone — to select whether services are multimedia messaging, the phone plays a tone when the instant messaging, synchronization, phone is switched on. e-mail application, streaming, push to talk, IM and Web. Your service Flight query — to select whether provider may also send you these Activate flight profile? appears every settings. See ”Configuration settings time the phone is switched on if the service” p. xi. flight mode was set before switching off the device. See ”Flight mode” For information on availability and p. 35. the appropriate configuration settings, contact your network ■ Enhancements operator or service provider. Select Menu > Settings > This menu is shown only if the phone Configuration and from the is or has been connected to a following options: compatible mobile enhancement.

Default config. settings — to view the parameters differ according to the service providers saved in the phone. selected service type. To delete or Scroll to a service provider, and select activate a personal account, scroll to Details to view the applications that it, and select Options > Delete or the configuration settings of this Activate. service provider support. To set the configuration settings of the service ■ Security provider as default settings, select When security features that restrict Options > Set as default. To delete calls are in use (such as call barring, configuration settings, select Delete. closed user group, and fixed dialing) Activ. default in all apps. — to calls still may be possible to the activate the default configuration official emergency number settings for supported applications. programmed into your device. Preferred access point — to view the Select Menu > Settings > Security saved access points. Scroll to an and from the following options: access point, and select Options > PIN code request and UPIN code Details to view the name of the request — to set the phone to ask for service provider, data bearer, and your PIN or UPIN code every time the packet data access point or GSM phone is switched on. Some SIM dial-up number. cards do not allow the code request Connect to serv. support — to to be turned off. download the configuration settings PIN2 code request — to select from your service provider if this is whether the PIN2 code is required supported by the service provider. when using a phone feature that is Personal config. settings — to add protected by the PIN2 code. Some new personal accounts for various SIM cards do not allow the code services, and to activate or delete request to be turned off. them. To add a new personal Call barring service — to restrict account if you have not added any, incoming calls to and outgoing calls select Add; otherwise, select from your phone (network service). A Options > Add new. Select the barring password is required. service type, and select and enter each of the required parameters. The

Fixed dialling — to create, edit, and ■ Digital rights activate a list of phone numbers or management prefixes. When the list is activated, Digital rights management (DRM) is you can only call or send messages copyright protection, designed to to the numbers on the list. If the SIM prevent modification and to limit card does not support this option, distribution of protected files. When Fixed dialling is hidden. you download protected files, such as Closed user group — to specify a sound, video, themes, or ringing tones group of people whom you can call to your phone, the files are free, but and who can call you (network locked. You pay for the key to activate service). the file and the activation key is Security level > Phone — to set the automatically sent to your phone phone to ask for the security code when you download the file. whenever a new SIM card is inserted To view the permissions for a into the phone. If you select Security protected file, scroll to the file, and level > Memory, the phone asks for select Options > Activation keys. For the security code when the SIM card example, you can see how many memory is selected, and you want to times you can view a video or how change the memory in use. many days you have left for listening Access codes — to change the to a song. security code, PIN code, PIN2 code, To extend the permissions for a file, or barring password. select Options and the corresponding Code in use — to select whether the option for the file type, such as PIN code or UPIN code should be Activate theme. You can send certain active. types of protected files to your Authority certificates or User friends, and they can buy their own certificates — to view the list of the activation keys. authority or user certificates This phone supports OMA DRM 1.0. downloaded into your phone. See ”Certificates” p. 75. ■ Restore factory settings Security module settings — to view To reset some of the menu settings Security module details, activate to their original values, select Module PIN request, or change the Menu > Settings > Restore factory module PIN and signing PIN. See also sett.. Enter the security code. ”Access codes” p. x.

This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown, the other menu numbers change accordingly. The operator can update this menu with a service message. For more information, see ”Service inbox” p. 74.

In this menu you can manage 2. Scroll to the desired folder. To graphics, images, recordings, and view a list of files in the folder, tones. These files are arranged in select Open. For the available folders. options, select Options. Your phone supports an activation 3. Scroll to the file you want to key system to protect acquired view, and select Open. For the content. Always check the delivery available options, select Options. terms of any content and activation Copyright protections may prevent key before acquiring them, as they some images, music (including may be subject to a fee. ringing tones), and other content The files stored in Gallery use a from being copied, modified, memory that mainly consists of the transferred or forwarded. microSD card of your phone. You can store images, themes, graphics, ■ Format memory card ringing tones, video clips, and sound To format a new memory card, select clips in Gallery. Menu > Gallery. Scroll to the To manage the files and folders, do memory card folder, and select the following: Options > Format memory card. 1. Select Menu > Gallery. A list of folders is shown. If a memory card is inserted in the phone, the folder Memory card, (unformatted), or the name of the memory card is shown.

■ Camera The phone saves the photo in Gallery > Images unless you set You can take photos or record video the phone to use the memory clips with the built-in 2 megapixel card for saving the photos. camera. The camera produces pictures in .jpg format and video 3. To take another photo, press the clips in .3gp format, and you can camera key after the photo digitally zoom up to eight times. saving indicator stops moving. To send the photo as a multimedia Take a photo message, select Options > Send. 1. To open the camera viewfinder, Tip: To activate the camera, select Menu > Media > Camera. press the camera key. To activate video, press and hold If Video is selected as the default the camera key. mode, select Options > Still image. This device supports an image capture resolution of 1600 x 1200 To zoom in or out, press the pixels. The image resolution in these volume key up or down, or the materials may appear different. left/right navigation key. To take up to four photos in quick Record a video clip succession, select Options > Img. Select Menu > Media > Camera > sequence on. The higher the Options > Video > Record. To pause resolution, the fewer photos you the recording, select Pause; to can take sequentially. resume the recording, select 2. To take a photo, press the camera Continue. To stop the recording, key, or select Capture. select Stop. The phone saves the recording in Gallery > Video clips. To change the folder for saving the recordings, see ”Camera settings” p. 52.

Camera settings Select Menu > Media > Media Select Menu > Media > Camera > player > Open gallery, Bookmarks, Options > Settings. You can define Go to address, or Media downloads. Image quality, Image size, Video clip To learn more about accessing quality, Video clip length, Camera videos see ”Download content and sounds, Default title, Image and applications” p. xi. video storage, and Default mode. In Image and video storage you can Set up the phone for a select the folder or memory card to streaming service save your photos and video clips. You may receive the configuration This device supports the following settings required for streaming as a video sizes: SubQCIF, QCIF, CIF, and configuration message from the VGA. network operator or service provider. See ”Configuration settings service” ■ Media player p. xi. You can also enter the settings With the media player you can view, manually. See ”Configuration” p. 46. play, and download files, such as To activate the settings, do the images, audio, video, and animated following: images. You can also view 1. Select Menu > Media > Media compatible streaming videos from a player > Streaming settings > network server (network service). Configuration. Select Menu > Media > Media 2. Only the configurations that player > Open gallery, Bookmarks, support streaming are shown. Go to address, or Media downloads. Select a service provider, Default, or Personal configuration for Progressive download streaming. Progressive download allows you to 3. Select Account and a streaming watch a video while it is being service account contained in the downloaded and saved in the active configuration settings. background. Playback starts immediately when enough data has been buffered.

■ Music player To skip to the beginning of the next track, select . To skip to Your phone includes a music player the beginning of the previous for listening to music tracks, track, select twice. recordings, or other .mp3, .mp4, or .aac format sound files that you have To rewind the current track, transferred to the phone with the select and hold . To fast Nokia Audio Manager application. forward the current track, select .mp3 and .aac format files are stored and hold . Release the key at in the memory card or in the Gallery the position you want. folders. Music files saved in the 3. To stop the playing, select . Music files folder and in another Warning: Listen to music at location, such as a folder of the a moderate level. Continuous memory card, are automatically exposure to high volume detected and added to the default may damage your hearing. track list. Do not hold the device near your ear when the Play the music tracks loudspeaker is in use, transferred to the phone because the volume may be 1. Select Menu > Media > Music extremely loud. player. The details of the first track on the default track list are Music player settings shown. In the Music player menu, the To use the graphical keys , , following options may be available: , or on the display, scroll Play via bluetooth — to make a left or right to the desired key, connection to an audio and select it. enhancement using a Bluetooth 2. To play a track, scroll to the track connection. that you want, and select . Track list — to view all the tracks To adjust the volume level, use available on the track list. To play a the volume keys on the side of track, scroll to the desired track, and the phone. select Play.

Select Options > Refresh all tracks Memory status — to view the free or Change track list to refresh the and used memory capacity. track list (for example, after adding new tracks to the list) or to change ■ Radio the track list that is shown when you The FM radio depends on an antenna open the Music player menu, if other than the wireless device’s several track lists are available in the antenna. A compatible headset or phone. enhancement needs to be attached Play options > Random > On — to to the device for the FM radio to play the tracks in the track list in function properly. random order. Select Repeat > Warning: Listen to music at Current track or All tracks to play the a moderate level. Continuous current track or the entire track list exposure to high volume repeatedly. may damage your hearing. Media equaliser — to open the list of Do not hold the device near media equalizer sets. See ”Equalizer” your ear when the p. 56. loudspeaker is in use, Loudspeaker or Headset — to listen because the volume may be to the music player through the extremely loud. loudspeaker or a compatible headset Select Menu > Media > Radio. connected to the phone. To use the graphical keys , , Tip: When using a headset, to , or on the display, scroll left skip to the next track, press or right to the desired key, and select the headset key. it. Send — to send the selected file using MMS, Bluetooth wireless technology, Save radio channels or an infrared connection. 1. To start the channel search, Music downloads — to connect to a select and hold or . To browser service related to the change the radio frequency in current track. This function is only 0.05 MHz steps, briefly press available when the address of the or . service is included in the track.

2. To save the channel to a memory Visual Radio settings — to select the location, 1 to 9, press and hold options for Visual Radio. To set the corresponding number key. To whether the Visual Radio application save the channel to a memory starts automatically when you turn location from 10 to 20, press on the radio, select Enable visual briefly 1 or 2, and press and hold service > Automatically. the desired number key, 0 to 9. Stations — to select the list of saved 3. Enter the name of the channel, channels. To delete or rename a and select OK. channel, scroll to the desired channel, and select Options > Listen to the radio Delete station or Rename. Select Menu > Media > Radio. To Mono output or Stereo output — to scroll to the desired channel, select listen to the radio in monophonic or , or press the headset key. To sound or in stereo. select a radio channel location, Loudspeaker or Headset — to listen briefly press the corresponding to the radio using the loudspeaker or number keys. To adjust the volume, headset. Keep the headset press the volume keys. connected to the phone. The lead of Select from the following options: the headset functions as the radio antenna. Switch off — to turn off the radio. Set frequency — to enter the Save station — to enter a channel frequency of the desired radio name and save the new channel. channel. Visual Radio — to set whether the You can normally make a call or Visual Radio application is used. answer an incoming call while Some radio channels may send text listening to the radio. During the or graphical information that you call, the volume of the radio is can view using the Visual Radio muted. application. When an application using a packet Note: This feature may not data or HSCSD connection is sending be available in your product or receiving data, it may interfere due to your subscription with the radio. (network service).

■ Voice recorder 5. To send the last recording using infrared, Bluetooth wireless You can record pieces of speech, technology, or a multimedia sound, or an active call, and save message, select Options > Send them in Gallery or a memory card. last recorded. This is useful when recording a name and phone number to write down later. List of recordings The recorder cannot be used when a Select Menu > Media > Voice data call or GPRS connection is recorder > Options > Recordings active. list. The list of folders in the Gallery is shown. Open Recordings to see the Record sound list with recordings. Select Options to select options for files in the 1. Select Menu > Media > Voice Gallery. See ”Gallery” p. 50. recorder. To use the graphical keys , , Define a storage folder or on the display, scroll left or To use another folder than Recordings right to the desired key, and as the default folder in Gallery, select select it. Menu > Media > Voice recorder > 2. To start the recording, select . Options > Select memory. Scroll to a To start the recording during a folder, and select Set. call, select Options > Record. While recording a call, all parties ■ Equalizer to the call hear a faint beeping sound about every 5 seconds. You can control the sound quality When recording a call, hold the when using the music player by phone in the normal position amplifying or diminishing frequency near to your ear. bands. 3. To end the recording, select . Select Menu > Media > Equaliser. The recording is saved in To activate a set, scroll to one of the Gallery > Recordings. equalizer sets, and select Activate. 4. To listen to the latest recording, To view, edit, or rename a selected select Options > Play last set, select Options > View, Edit, or recorded. Rename. Not all sets can be edited or renamed.

Note: This feature may not While you are connected to the PTT be available in your product service, you can use the other due to your subscription functions of the phone. The PTT (network service). service is not connected to Push to talk (PTT) over cellular is a traditional voice communication; two-way radio service available over therefore many of the services a GSM/GPRS cellular network available for traditional voice calls (network service). PTT provides direct (for example, voice mailbox) are not voice communication. To connect, available for PTT communication. press the PTT key. ■ You can use PTT to have a Connect to the PTT conversation with one person or with service a group of people having compatible To connect to the PTT service, select devices. When your call is connected, Menu > Push to talk > Switch PTT the people you are calling do not on. indicates the PTT connection. have to answer the phone. The indicates that the service is participants should confirm the temporarily unavailable. The phone reception of any communication automatically tries to reconnect to where appropriate, as there is no the service until you disconnect from other confirmation whether the the PTT service. If you have added recipients have heard the call. channels to the phone, you are To check availability and costs, and automatically joined to the active to subscribe to the service, contact channels, and if you have selected a your network operator or service contact, phonebook group or provider. Roaming services may be channel as the default action for the more limited than for normal calls. PTT-key, then the name of the selected item is displayed in the Before you can use the PTT service, standby mode. you must define the required PTT service settings. See ”PTT settings” To disconnect from the PTT service, p. 61. select Switch PTT off.

■ Make and receive a PTT available, not logged into the PTT call service, or unknown. indicates that the contact does not want to be Set the phone to use the loudspeaker disturbed. You cannot call the or earpiece for PTT communication. contact, but you can send a callback When the earpiece is selected, you request. can use the phone normally, by holding it to your ear. To subscribe a contact, select Options > Subscribe contact, or if Warning: Do not hold the one or more contacts are marked, device near your ear when select Subscribe marked. the loudspeaker is in use, because the volume may be extremely loud. Make a channel or a group call When connected to the PTT service, you can make or receive channel To make a call to a channel, select calls, group calls, or one-to-one Channel list in the PTT menu, scroll calls. One-to-one calls are calls you to the desired channel, and press the make to only one person. PTT key. Press and hold the PTT key the entire To make a group call from Contacts, time you are talking, and hold the the recipients must be connected to phone in front of you so that you can the PTT service. Select Menu > see the display. When you are Contacts > Groups, scroll to the finished, release the PTT key. Talking desired group, and press the PTT key. is allowed on a first come, first served basis. When someone stops Make a one-to-one call talking, the first person to press the To start a one-to-one call from the PTT key can talk next. list of contacts to which you added To check the login status of your the PTT address, select Contacts list. contacts, select Menu > Push to Scroll to a contact, and press the PTT talk > Contacts list. This service key. depends on your network operator or You can also select the contact from service provider and is only available Contacts. for subscribed contacts. , , or indicate that the contact is

To start a one-to-one call from the If you press the PTT key to try to list of PTT channels, select Channel respond to a call while another list, and scroll to the desired member is talking, you hear a tone, channel. Select Members, scroll to and Queuing is displayed as long as the desired contact, and press the you press the PTT key. Press and hold PTT key. the PTT key, and wait for the other To start a one-to-one call from the person to finish; then you can talk. list of callback requests you have received, select Callback inbox. ■ Callback requests Scroll to the desired contact, and If you make a one-to-one call and do press the PTT key. not get a response, you can send a request for the person to call you Make a PTT call to multiple back. recipients You can select multiple PTT contacts Send a callback request from the contact list. The recipients You can send a callback request in receive an incoming call and must the following ways: accept the call to participate. • To send a callback request from Select Menu > Push to talk > the contacts list in the Push to Contacts list, and mark the desired talk menu, select Contacts list. contacts. To make the call, press the Scroll to a contact, and select PTT key. The contacts who accept the Options > Send callback. call are shown. • To send a callback request from Contacts, search for the desired Receive a PTT call contact, select Details, scroll to A short tone notifies you of an the PTT address, and select incoming PTT call. Information such Options > Send callback. as the channel name or the • To send a callback request from nickname (network service) of the the channel list in the Push to caller is displayed. talk menu, select Channel list, If you have set the phone to first and scroll to the desired channel. notify you of one-to-one calls, Select Members, scroll to the accept or reject the call. desired contact, and select Options > Send callback.

• To send a callback request from • To add a PTT address to a name in the callback request list in the Contacts, search for the desired Push to talk menu, select contact, and select Details > Callback inbox. Scroll to a Options > Add detail > Push to contact, and select Options > talk address. Send callback. • To add a contact to the PTT contacts list, select Menu > Push Respond to a callback to talk > Contacts list > request Options > Add contact. When you receive a callback request, • To add a contact from the Callback request received is shown channel list, connect to the PTT in the standby mode. Select View. service, select Channel list, and The list of contacts who have sent scroll to the desired channel. you callback requests is shown. Select Members, scroll to the To make a one-to-one call, press the member whose contact PTT key. information you want to save, and select Options. To add a new To send a call request back to the contact, select Save as. To add a sender, select Options > Send PTT address to a name in callback. Contacts, select Add to contact. To delete the request, select Delete. To view the sender's PTT address, ■ PTT channels select View. When you call a channel, all To save a new contact or to add the members joined to the channel hear PTT address to a contact, select the call simultaneously. Options > Save as or Add to contact. There are three types of PTT ■ channels: Add a one-to-one • Provisioned channel — A contact permanent channel is created by You can save the names of persons the service provider. to whom you often make • Public channel — Every channel one-to-one calls in the following member can invite other persons. ways:

• Private channel — Only persons 2. To add the channel to your who receive an invitation from phone, select Save. the channel creator can join in. 3. To set the status for the channel, select Active or Inactive. Add a channel To reject the invitation, select To add a public or private channel, View > Discard > Yes. select Menu > Push to talk > Add channel, and edit the settings in the ■ PTT settings form fields: There are two kinds of PTT settings: Channel status: — Select Active or settings for connecting to the Inactive. service and settings for use. Nickname in channel: — Enter your You may receive the settings for nickname for the channel. connecting to the service from your Channel security: — Select Public network operator or service provider. channel or Private channel. See ”Configuration settings service” To send an invitation to the group, p. xi. You can enter the settings select Yes when the phone requests manually. See ”Configuration” p. 46. it. You can send the invitation using To select the settings for connecting a text message or infrared. to the service, select Menu > Push To add a channel by entering the to talk > Configuration sett. and channel address manually, select from the following options: Menu > Push to talk > Add Configuration — to select a service channel > Options > Edit address provider, Default, or Personal manually. Enter the channel address configuration for PTT service. Only provided by your service provider. the configurations that support the PTT service are shown. Receive an invitation Account — to select a PTT service When you receive an invitation to a account in the active configuration group, Channel invitation received: is settings. displayed. You can also select from the 1. To view the contact who sent the following options: Push to talk user invitation and the channel name, Default nickname, Push to address if the group is not a talk password, Domain, and Server private channel, select View. address.

To edit the PTT settings for use, Send my PTT address > No — to hide select Menu > Push to talk > Push to your PTT address from calls. talk settings, and from the following options: 1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify. PTT key default function is used to select the default action of the PTT-key. It can be set to opening the Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other contact, group or channel is highlighted) to a contact, channel or group. Show my login status > Yes — to enable the sending of the login status. PTT status in startup > Yes > or Ask first — to set the phone to automatically connect to the PTT service when you switch on the phone. Push to talk when abroad — to switch the PTT service on or off when the phone is used outside of the home network.

■ Alarm clock select Stop. If you let the phone continue to sound the alarm for a You can set the phone to alarm at a minute or select Snooze, the alarm desired time. Select Menu > stops for the time you set in Snooze Organiser > Alarm clock. time-out, and then resumes. To set the alarm, select Alarm time, If the alarm time is reached while enter the alarm time, and select OK. the device is switched off, the device To change the alarm time when the switches itself on and starts alarm time is set, select On. sounding the alarm tone. If you To set the phone to alert you on select Stop, the device asks whether selected days of the week, select you want to activate the device for Repeat alarm. calls. Select No to switch off the To select the alarm tone or set a device or Yes to make and receive radio channel as the alarm tone, calls. Do not select Yes when select Alarm tone. If you select the wireless phone use may cause radio as an alarm tone, connect the interference or danger. headset to the phone. The phone uses the last channel you listened to ■ Calendar as the alarm, and the alarm plays Select Menu > Organiser > Calendar. through the loudspeaker. If you remove the headset or switch off the The current day is indicated by a phone, the default alarm tone frame in the month view. If there are replaces the radio. any notes set for the day, the day is in bold type, and the beginning of To set a snooze time-out, select the note is shown below the Snooze time-out and the time. calendar. To view the day notes, select View. To view a week, select Stop the alarm Options > Week view. To delete all The phone sounds an alert tone, and notes in the calendar, select the flashes Alarm! and the current time month or week view, and select on the display, even if the phone was Options > Delete all notes. switched off. To stop the alarm,

Other options for the calendar day ■ To-do list view: make a note; delete, edit, To save a note for a task that you move, or repeat a note; copy a note must do, select Menu > Organiser > to another day; send a note with To-do list. Bluetooth technology; or send a note to the calendar of another To make a note if no note is added, compatible phone as a text message select Add; otherwise, select or multimedia message. In Settings Options > Add. Write the note, you can set the date, time, time select Save and the priority, and set zone, date or time format, date the deadline and alarm for the note. separator, default view, or the first To view a note, scroll to it, and select day of the week. In Auto-delete View. notes you can set the phone to You can also select an option to delete old notes automatically after delete the selected note and delete a specified time. all the notes that you have marked as done. You can sort the notes by Make a calendar note priority or by deadline, send a note Select Menu > Organiser > to another phone as a text message Calendar. Scroll to the date you or a multimedia message, save a want, select Options > Make a note note as a calendar note, or access and one of the following note types: the calendar. Meeting, Call, Birthday, While viewing a note, you can also Memo, or Reminder. Fill in the select an option to edit the deadline fields for the note. or priority for the note, or mark the note as done. Note alarm The phone beeps and displays the ■ Notes note. With a call note on the To write and send notes, select display, to call the displayed number, Menu > Organiser > Notes. press the call key. To stop the alarm To make a note if no note is added, and to view the note, select View. To select Add; otherwise, select stop the alarm for 10 minutes, select Options > Make a note. Write the Snooze. note, and select Save. To stop the alarm without viewing the note, select Exit.

Other options include deleting and Convert currency editing a note. While editing a note, Select Menu > Organiser > you can also exit the text editor Calculator. To save the exchange without saving the changes. You can rate, select Options > Exchange send the note to compatible devices rate. Select either of the displayed through infrared, Bluetooth wireless options. Enter the exchange rate, technology, text message, or a press # for a decimal point, and multimedia message. If the note is select OK. The exchange rate too long to be sent as a text remains in the memory until you message, the phone asks you to replace it with another one. To delete the appropriate number of perform the currency conversion, characters from your note. enter the amount to be converted, and select Options > In domestic or ■ Calculator In foreign. The calculator in your phone adds, Note: When you change subtracts, multiplies, divides, base currency, you must calculates the square and the square enter the new rates because root, and converts currency values. all previously set exchange Note: This calculator has rates are cleared. limited accuracy and is designed for simple ■ Countdown timer calculations. Select Menu > Organiser > Select Menu > Organiser > Countdown timer. Enter the alarm Calculator. When 0 is displayed, time in hours, minutes, and seconds, enter the first number in the and select OK. If you wish, write calculation. Press # for a decimal your own note text that is displayed point. Select Options > Add, when the time expires. To start the Subtract, Multiply, Divide, Square, countdown timer, select Start. To Square root, or Change sign. Enter change the countdown time, select the second number. For a total, Change time. To stop the timer, select Equals. To start a new select Stop timer. calculation, first select and hold Clear.

If the alarm time is reached when Split timing — to take intermediate the phone is in the standby mode, times. To start the time observation, the phone sounds a tone and flashes select Start. Select Split every time the note text if it is set or that you want to take an Countdown time up. To stop the intermediate time. To stop the time alarm, press any key. If no key is observation, select Stop. pressed, the alarm automatically To save the measured time, select stops within 30 seconds. To stop the Save. alarm and delete the note text, To start the time observation again, select Exit. To restart the countdown select Options > Start. The new time timer, select Restart. is added to the previous time. To ■ reset the time without saving it, Stopwatch select Reset. You can measure time, take To set the stopwatch timing in the intermediate times, or take lap times background, press the end key. using the stopwatch. During timing, Lap timing — to take lap times. To set the other functions of the phone can the stopwatch timing in the be used. To set the stopwatch timing background, press the end key. in the background, press the end key. Continue — to view the timing that Using the stopwatch or allowing it you have set in the background. to run in the background when using other features increases the demand Show last — to view the most on battery power and reduces the recently measured time if the battery life. stopwatch is not reset. Select Menu > Organiser > View times or Delete times — to view Stopwatch and from the following or delete the saved times. options:

■ Games Applications > Options > Application settings. The microSD card of your phone may contain games. ■ Collection Launch a game Your phone software includes some Select Menu > Applications > Java applications. Games. Scroll to the desired game, and select Open, or press the call Launch an application key. Select Menu > Applications > For options related to a game, see Collection. Scroll to an application, ”Application options” p. 67. and select Open, or press the call key. Game downloads Select Menu > Applications > Application options Options > Downloads > Game Delete — to delete the application downloads. The list of available from the phone. bookmarks is shown. See Details — to give additional ”Bookmarks” p. 72. information about the application. Important: Only install and Update version — to check if a new use applications and other version of the application is software from sources that available for download from Web offer adequate security and (network service). protection against harmful Web page — to provide further software. information or additional data for the application from an Internet Game settings page (network service). It is only To set sounds, lights, and shakes for shown if an Internet address has the game, select Menu > been provided with the application.

Application access — to restrict the Your device may have some application from accessing the bookmarks loaded for sites not network. Different categories are affiliated with Nokia. Nokia does not shown. Select in each category one warrant or endorse these sites. If you of the available permissions. choose to access them, you should take the same precautions, for Download an application security or content, as you would with any Internet site. Your phone supports J2ME™ Java applications. Make sure that the application is compatible with your ■ Presenter phone before downloading it. The Presenter application is Important: Only install and compatible with Microsoft Office use applications and other PowerPoint and enables you to software from sources that control slide presentations, a offer adequate security and software DVD, an MP3 player, or protection against harmful other PC applications remotely from software. your device. You can download new Java To use applications other than slide applications in different ways: presentations and desktop mode, you must create a corresponding •Select Menu > Applications > custom profile on the PC application. Options > Downloads > Application downloads, and the Before you can use the application list of available bookmarks is you must do the following: shown. See ”Bookmarks” p. 72. 1. Install the Nokia Presenter PC For the availability of different application on your PC. (This services, pricing, and tariffs, component is included in the contact your service provider. software package, but is also available for download on the • Use the game download function. Nokia Web site.) See ”Game downloads” p. 67. • Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone.

2. Launch and configure the PC After you select the slide presentation component. Make sure that the you browse or skip slides, or jump selected incoming Bluetooth ahead, by using the 4-way navigation serial port (COM port) key. To view your speaker notes, select corresponds to the one defined in Notes. To point things out on the the Bluetooth software settings slides, select Pointer to activate a on the Bluetooth device of your small black round marker, that you PC. For details, refer to the PC control with the 4-way navigation component documentation and key. Select Options > Slide list to ”Set up a Bluetooth connection” return to the slide list. Select Options p. 40. > Applications list to return to the list 3. Open the slide presentation, or of applications. start the application you want to To control the mouse pointer (the control remotely from your cursor) remotely from the phone, phone. select the desktop mode. After you Select Applications > Collection > open the desktop, the phone Presenter > Connect and the device automatically controls your mouse you want to connect to. pointer. To return to the list of applications, select Options > When the Bluetooth Connection Applications list. Successful dialog appears on your PC screen, you must click on it to To quit the Presenter, select confirm the Bluetooth connection. Options > Exit application?. The list of available application types is displayed. Select Open to access the desired application. Select Options > Settings to set the Font size for the speaker notes, and Timer (in minutes) to optimize the slide presentation time available. To save the settings, select Options > Back.

You can access various mobile 2. Make a connection to the service. Internet services with your phone See ”Connect to a service” p. 70. browser. 3. Start browsing the pages of the Important: Use only service. See ”Browse pages” p. 71. services that you trust and 4. When you finish browsing, end that offer adequate security the connection to the service. To and protection against disconnect, see ”Options while harmful software. browsing” p. 71. Check the availability of these services, pricing, tariffs, and ■ Set up browsing instructions with your service You may receive the configuration provider. settings required for browsing as a With the phone browser you can configuration message from the view the services that use wireless network operator or service provider markup language (WML) or that offers the service that you want extensible hypertext markup to use. See ”Configuration settings language (XHTML) on their pages. service” p. xi. You can also enter all Appearance may vary due to screen the configuration settings manually. size. You may not be able to view all See ”Configuration” p. 46. details of the Internet pages. ■ Connect to a service ■ Basic steps to access First, ensure that the correct and use services configuration settings of the service 1. Save the service settings that are that you want to use are activated. required to access the service 1. To select the settings for that you want to use. See ”Set up connecting to the service, select browsing” p. 70. Menu > Web > Settings > Configuration settings.

2. Select Configuration. Only the Follow the text guides on the phone configurations that support display. For more information, browsing service are shown. contact your service provider. Select a service provider, Default, If packet data is selected as the data or Personal configuration for bearer, is shown on the top left of browsing. See ”Set up browsing” the display during browsing. If you p. 70. receive a call or a text message, or 3. Select Account and a browsing make a call during a packet data service account contained in the connection, is shown on the top active configuration settings. right of the display to indicate that 4. Select Display terminal window > the packet data connection is Yes to perform manual user suspended (on hold). After a call the authentication for intranet phone tries to reconnect the packet connections. data connection. Secondly, make a connection to the service in one of the following ways: Browse with phone keys •Select Menu > Web > Home; or To browse through the page, scroll in in the standby mode, press and any direction. hold 0. To select a highlighted item, press • To select a bookmark of the the call key, or select Select. service, select Menu > Web > To enter letters and numbers, press Bookmarks. the 0 to 9 keys. To enter special • To select the last URL, select characters, press *. Menu > Web > Last web address. • To enter the address of the Options while browsing service, select Menu > Web > Go Select from the following options: to address. Enter the address of Home — to return to your start page. the service, and select OK. Shortcuts — to open a new list of options that are specific to the page. ■ Browse pages This option is only available if the After you make a connection to the page contains shortcuts. service, you can start browsing its Add bookmark — to save the page as pages. The function of the phone a bookmark. keys may vary in different services.

Bookmarks — to access the list of 3. Select Options to view, edit, bookmarks. See ”Bookmarks” p. 72. delete, or send the bookmark; to Page options — to show the list of create a new bookmark; or to options for the active page. save the bookmark to a folder. History — to get a list showing the Your device may have some last visited URLs. bookmarks loaded for sites not affiliated with Nokia. Nokia does not Other options — to show a list of warrant or endorse these sites. If you other options. choose to access them, you should Reload — to reload and update the take the same precautions, for current page. security or content, as you would Quit — to disconnect from a service. with any Internet site. The service provider may also offer other options. Receive a bookmark When you have received a bookmark Direct calling that is sent as a bookmark, The browser supports functions that 1 bookmark received is displayed. To you can access while browsing. You save the bookmark, select Show > can make a phone call, send DTMF Save. To view or delete the tones while a voice call is in bookmark, select Options > View or progress, and save a name and a Delete. To discard the bookmark phone number from a page. directly after you have received the bookmark, select Exit > OK. ■ Bookmarks ■ Appearance settings You can save page addresses as bookmarks in the phone memory. While browsing, select Options > Other options > Appearance 1. While browsing, select Options > settings, or in the standby mode, Bookmarks; or in the standby select Menu > Web > Settings > mode, select Menu > Web > Appearance settings and from the Bookmarks. following options: 2. Scroll to a bookmark, and select Text wrapping > On — to set the text it, or press the call key to make a to continue on the next line on the connection to the page display. If you select Off, the text is associated with the bookmark. abbreviated.

Font size > Extra small, Small, or ■ Security settings Medium — to set the font size. Show images > No — to hide Cookies pictures on the page. This can speed A cookie is data that a site saves in up the browsing of pages that the cache memory of your phone. contain a lot of pictures. Cookies are saved until you clear the Alerts > Alert for unsecure conn. > cache memory. See ”Cache memory” Yes — to set the phone to alert when p. 74. a secure connection changes to an While browsing, select Options > unsecure one during browsing. Other options > Security > Cookie Alerts > Alert for unsecure items > settings; or in the standby mode, Yes — to set the phone to alert when select Menu > Web > Settings > a secure page contains an unsecure Security settings > Cookies. To allow item. These alerts do not guarantee a or prevent the phone from receiving secure connection. For more cookies, select Allow or Reject. information, see ”Browser security” p. 75. Scripts over secure Character encoding > Content connection encoding — to select the encoding You can select whether to allow the for the browser page content. running of scripts from a secure Character encoding > Unicode page. The phone supports WML (UTF-8) web add. > On — to set the scripts. phone to send a URL as a UTF-8 While browsing, to allow the scripts, encoding. You may need this setting select Options > Other options > when you access a Web page created Security > WMLScript settings; or in in foreign language. the standby mode, select Menu > Screen size > Full or Small — to set Web > Settings > Security settings > the screen layout. WMLScripts in sec. conn. > Allow. JavaScript > Enable — to enable the Java scripts.

■ Download settings Service inbox settings To automatically save all Select Menu > Web > Settings > downloaded files in Gallery, select Service inbox settings. Menu > Web > Settings > To set whether you want to receive Downloading settings > Automatic service messages, select Service saving > On. messages > On or Off. To set the phone to receive service ■ Service inbox messages only from content authors The phone is able to receive service approved by the service provider, messages (pushed messages) sent by select Message filter > On. To view your service provider (network the list of the approved content service). Service messages are authors, select Trusted channels. notifications (for example, news To set the phone to automatically headlines), and they may contain a activate the browser from the text message or an address of a standby mode when the phone has service. received a service message, select To access the Service inbox in the Automatic connection > On. If you standby mode, when you have select Off, the phone activates the received a service message, select browser only after you select Show. If you select Exit, the Retrieve when the phone has message is moved to the Service received a service message. inbox. To access the Service inbox later, select Menu > Web > Service ■ Cache memory inbox. A cache is a memory location that is To access the Service inbox while used to store data temporarily. If you browsing, select Options > Other have tried to access or have accessed options > Service inbox. Scroll to the confidential information requiring message you want, and to activate passwords, empty the cache after the browser and download the each use. The information or services marked content, select Retrieve. To you have accessed is stored in the display detailed information on the cache. service notification or to delete the message, select Options > Details or Delete.

To empty the cache while browsing, Certificates select Options > Other options > Important: Even if the use Clear the cache; in the standby of certificates makes the mode, select Menu > Web > Clear risks involved in remote the cache. connections and software installation considerably ■ Browser security smaller, they must be used Security features may be required correctly in order to benefit for some services, such as online from increased security. The banking or shopping. For such existence of a certificate connections you need security does not offer any certificates and possibly a security protection by itself; the module, which may be available on certificate manager must your SIM card. For more information, contain correct, authentic, contact your service provider. or trusted certificates for increased security to be Security module available. Certificates have a restricted lifetime. If The security module improves Expired certificate or security services for applications Certificate not valid yet is requiring a browser connection, and shown even if the certificate allows you to use a digital signature. should be valid, check that The security module may contain the current date and time in certificates as well as private and your device are correct. public keys. The certificates are saved in the security module by the Before changing any service provider. certificate settings, you must make sure that you To view or change the security really trust the owner of the module settings, select Menu > certificate and that the Settings > Security > Security certificate really belongs to module settings. the listed owner.

There are three kinds of certificates: To make a digital signature, select a server certificates, authority link on a page, for example, the title certificates, and user certificates. of the book you want to buy and its You may receive these certificates price. The text to sign is shown, from your service provider. Authority which may include the amount and certificates and user certificates may date. also be saved in the security module Check that the header text is Read by the service provider. and that the digital signature icon To view the list of the authority or is shown. user certificates downloaded into If the digital signature icon does not your phone, select Menu > appear, there is a security breach, Settings > Security > Authority and you should not enter any certificates or User certificates. personal data such as your signing is displayed during a PIN. connection, if the data transmission To sign the text, read all of the text between the phone and the content first, and select Sign. server is encrypted. The text may not fit within a single The security icon does not indicate screen. Therefore, make sure to scroll that the data transmission between through and read all of the text the gateway and the content server before signing. (or place where the requested Select the user certificate you want resource is stored) is secure. The to use. Enter the signing PIN (see service provider secures the data ”Access codes” p. x), and select OK. transmission between the gateway The digital signature icon and the content server. disappears, and the service may display a confirmation of your Digital signature purchase. You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.

Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability, rates, and information on using SIM services, contact your SIM card vendor, for example, network operator, service provider, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM serv. actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged.

You can send and receive e-mail, and For availability and subscription to access the Internet when your phone data services, contact your network is connected to a compatible PC operator or service provider. through an IR, Bluetooth wireless The use of HSCSD services consumes technology, or USB data cable the phone battery faster than connection. You can use your phone normal voice or data calls. You may with a variety of PC connectivity and need to connect the phone to a data communications applications. charger for the duration of data transfer. ■ Nokia PC Suite See ”Packet data settings” p. 42. With Nokia PC Suite you can synchronize contacts, calendar, ■ Data communication notes, and to-do notes between your applications phone and the compatible PC or a remote Internet server (network For information on using a data service). You may find more communication application, refer to information and PC Suite on the the documentation provided with it. Nokia Web site at Making or answering phone calls www.nokia-asia.com/6233/support. during a computer connection is not recommended, as it might disrupt ■ EGPRS, HSCSD, CSD, the operation. and WCDMA For better performance during data calls, place the phone on a With your phone you can use the stationary surface with the keypad enhanced GPRS (EGPRS), general facing downward. Do not move the packet radio service (GPRS), circuit phone by holding it in your hand switched data (GSM data) services, during a data call. high speed circuit switched data (HSCSD), and WCDMA packet and circuit switched data services.

■ Charging and If the battery is completely discharging discharged, it may take a few minutes before the charging indicator appears Your device is powered by a on the display or before any calls can rechargeable battery. The full be made. performance of a new battery is achieved only after two or three Use the battery only for its intended complete charge and discharge purpose. Never use any charger or cycles. The battery can be charged battery that is damaged. and discharged hundreds of times, Do not short-circuit the battery. but it will eventually wear out. When Accidental short-circuiting can occur the talk and standby times are when a metallic object such as a coin, noticeably shorter than normal, clip, or pen causes direct connection replace the battery. Use only Nokia of the positive (+) and negative (-) approved batteries, and recharge terminals of the battery. (These look your battery only with Nokia like metal strips on the battery.) This approved chargers designated for might happen, for example, when you this device. carry a spare battery in your pocket or If a replacement battery is being purse. Short-circuiting the terminals used for the first time or if the may damage the battery or the battery has not been used for a connecting object. prolonged period, it may be Leaving the battery in hot or cold necessary to connect the charger places, such as in a closed car in and then disconnect and reconnect summer or winter conditions, will it to start the charging. reduce the capacity and lifetime of Unplug the charger from the the battery. Always try to keep the electrical plug and the device when battery between 15°C and 25°C (59°F not in use. Do not leave fully charged and 77°F). A device with a hot or cold battery connected to a charger, since battery may not work temporarily, overcharging may shorten its even when the battery is fully lifetime. If left unused, a fully charged. Battery performance is charged battery will lose its charge particularly limited in temperatures over time. well below freezing.

Do not dispose of batteries in a fire Authenticate hologram as they may explode. Batteries may 1. When looking at the hologram on also explode if damaged. Dispose of the label, you should see the batteries according to local Nokia connecting hands symbol regulations. Please recycle when from one angle and the Nokia possible. Do not dispose as Original Enhancements logo household waste. when looking from another angle. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized 2. When you angle the hologram Nokia dealer, and inspect the left, right, down, and up, you hologram label using the following should see 1, 2, 3, and 4 dots on steps: each side respectively. Successful completion of the steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it. If authenticity cannot be verified, return the battery to the place of purchase.

What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia-asia.com/batterycheck.

A new extensive Fashion Stereo Headset HS-3 range of Headset HS-5 enhancements is Wireless Headset HDW-3 available for your Wireless Headset HS-11W phone. Select the enhancements which accommodate your Wireless Clip-on Headset HS-21W specific communication needs. List of Wireless Clip-on Headset HS-36W compatible enhancements: Wireless Boom Headset HS-4W

Car Solutions Audio Adapters Headrest Handsfree BHF-3 Audio adapter AD-15 Plug-in Car handsfree HF-3 Power Wireless Plug-in Travel Charger AC-3 Car Handsfree HF-6W Charger Adapter AC-44 Car Kit CK-10 Advanced Car Kit CK-7W Imaging Car Kit N616 Remote Camera PT-6 Advanced car kit N610 Messaging Car Kit CARK 91 Digital Pen SU-1B Mobile Holders and Antenna Couplers Music Mobile Holder CR-39 Music Stand MD-1 Car Accessories Some of the enhancements are described Charger Adapter CA-44 in detail below. Mobile Charger DC-4 For availability of the enhancements, Microphone MP-2 please check with your local dealer. A few Converter CA-55 practical rules for enhancements operation: Data • Keep the enhancements out of small Connectivity Cable CA-53 children’s reach. Headsets • When you disconnect the power cord Boom Headset HDB-4 of any accessory, grasp and pull the Stereo Headset HDS-3 plug, not the cord.

• Check regularly that all mobilephone integrated Bluetooth wireless equipment in a vehicle dismounted technology. It combines the advantages and operating properly. of handsfree functionality with high Use only batteries, chargers and audio quality and comfortable mobile enhancements approved by the phone communication. manufacturer. The use of any other Its three operational modes and tailored types may invalidate any approval or features ensure that you can use your warranty applying tithe phone, and may time outside the office as efficiently as be dangerous. possible. Get ready to make the switch from mobile to auto mobile! ■ Battery • Handsfree with high audio quality • Convenient call and message Type Talktime# Standby# handling due to separate display and input device BP-6M GSM up to 4 GSM up to 340 • Up to 1000 contacts per user profile, hrs hrs up to 5 numbers per contact WCDMA up to WCDMA up to • Support for two user profiles, 3.1 hrs 340 hrs including contacts, voice tags, and # Variation in operation times may occur car kit settings depending on SIM card, network and • Voice recognition with support of usage settings, usage style and name dialing and voice commands environments. ■ Nokia Universal Holder ■ Nokia 616 Car Kit CR-39

From Mobile to Auto Mobile. The Nokia 616 Car Kit is an easy-to use and yet versatile car communication It supports a broad variety of Nokia and system for all compatible existing and other manufacturers mobile devices. It coming Nokia mobile phones with holds your compatible mobile device

Copyright © 2007 Nokia. All rights reserved. 83 Nokia original enhancements firmly in place and gives you flexibility to choose a compatible device today and tomorrow. The new stylish design will complement your mobile phone. Insert your compatible mobile device into the Nokia Universal Holder and simply fasten it by pressing the clamps — release it by depressing a button.

■ Nokia Connectivity Cable CA-53

A connectivity cable for a compatible PC and Nokia device. It enables data transfer and synchronization with the PC, including calendar, phonebook, notes, to-do list — depending on the version of Nokia PC Suite. Supports USB 2.0 standard and maximum data transfer speeds.

Your device is a product of superior • Do not drop, knock, or shake the design and craftsmanship and should be device. Rough handling can break treated with care. The suggestions below internal circuit boards and fine will help you protect your warranty mechanics. coverage. • Do not use harsh chemicals, cleaning • Keep the device dry. Precipitation, solvents, or strong detergents to humidity and all types of liquids or clean the device. moisture can contain minerals that • Do not paint the device. Paint can will corrode electronic circuits. If your clog the moving parts and prevent device does get wet, remove the proper operation. battery and allow the device to dry • Use a soft, clean, dry cloth to clean completely before replacing it. any lenses (such as camera, proximity • Do not use or store the device in sensor, and light sensor lenses). dusty, dirty areas. Its moving parts • Use only the supplied or an approved and electronic components can be replacement antenna. Unauthorized damaged. antennas, modifications, or • Do not store the device in hot areas. attachments could damage the High temperatures can shorten the device and may violate regulations life of electronic devices, damage governing radio devices. batteries, and warp or melt certain • Use chargers indoors. plastics. • Always create a backup of data you • Do not store the device in cold areas. want to keep (such as contacts and When the device returns to its normal calendar notes) before sending your temperature, moisture can form device to a service facility. inside the device and damage All of the above suggestions apply electronic circuit boards. equally to your device, battery, charger, • Do not attempt to open the device or any enhancement. If any device is not other than as instructed in this guide. working properly, take it to the nearest authorized service facility for service.

Your device and its enhancements may ■ Medical devices contain small parts. Keep them out of the Operation of any radio transmitting reach of small children. equipment, including wireless phones, may interfere with the functionality of ■ Operating environment inadequately protected medical devices. Remember to follow any special Consult a physician or the manufacturer regulations in force in any area, and of the medical device to determine if they always switch off your device when its are adequately shielded from external RF use is prohibited or when it may cause energy or if you have any questions. interference or danger. Use the device Switch off your device in health care only in its normal operating positions. facilities when any regulations posted in This device meets RF exposure guidelines these areas instruct you to do so. when used either in the normal use Hospitals or health care facilities may be position against the ear or when using equipment that could be sensitive positioned at least 2.2 centimeters (7/8 to external RF energy. inches) from the body. When a carry case, belt clip or holder is used for body-worn Pacemakers operation, it should not contain metal Pacemaker manufacturers recommend and should position the device the that a minimum separation of above-stated distance from your body. To 15.3 centimeters (6 inches) be transmit data files or messages, this maintained between a wireless phone device requires a quality connection to and a pacemaker to avoid potential the network. In some cases, transmission interference with the pacemaker. These of data files or messages may be delayed recommendations are consistent with until such a connection is available. the independent research by and Ensure the above separation distance recommendations of Wireless instructions are followed until the Technology Research. Persons with transmission is completed. pacemakers should do the following: Parts of the device are magnetic. Metallic • Always keep the device more than materials may be attracted to the device. 15.3 centimeters (6 inches) from the Do not place credit cards or other pacemaker magnetic storage media near the device, • Not carry the device in a breast because information stored on them may pocket be erased.

• Hold the device to the ear opposite wireless equipment in the area over the the pacemaker to minimize the air bag or in the air bag deployment area. potential for interference. If in-vehicle wireless equipment is If you suspect interference, switch off improperly installed and the air bag your device, and move the device away. inflates, serious injury could result. Using your device while flying in aircraft Hearing aids is prohibited. Switch off your device Some digital wireless devices may before boarding an aircraft. The use of interfere with some hearing aids. If wireless teledevices in an aircraft may be interference occurs, consult your service dangerous to the operation of the provider. aircraft, disrupt the wireless telephone network, and may be illegal. ■ Vehicles RF signals may affect improperly ■ Potentially explosive installed or inadequately shielded environments electronic systems in motor vehicles such Switch off your device when in any area as electronic fuel injection systems, with a potentially explosive atmosphere electronic antiskid (antilock) braking and obey all signs and instructions. systems, electronic speed control Potentially explosive atmospheres systems, and air bag systems. For more include areas where you would normally information, check with the be advised to turn off your vehicle manufacturer or its representative of engine. Sparks in such areas could cause your vehicle or any equipment that has an explosion or fire resulting in bodily been added. injury or even death. Switch off the Only qualified personnel should service device at refueling points such as near the device, or install the device in a gas pumps at service stations. Observe vehicle. Faulty installation or service may restrictions on the use of radio be dangerous and may invalidate any equipment in fuel depots, storage, and warranty that may apply to the device. distribution areas; chemical plants; or Check regularly that all wireless device where blasting operations are in equipment in your vehicle is mounted progress. Areas with a potentially and operating properly. Do not store or explosive atmosphere are often but not carry flammable liquids, gases, or always clearly marked. They include explosive materials in the same below deck on boats, chemical transfer or compartment as the device, its parts, or storage facilities, vehicles using liquefied enhancements. For vehicles equipped petroleum gas (such as propane or with an air bag, remember that air bags butane), and areas where the air contains inflate with great force. Do not place chemicals or particles such as grain, dust, objects, including installed or portable or metal powders.

■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key. If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

■ Certification information power level, the actual SAR of the device (SAR) while operating can be well below the THIS DEVICE MEETS INTERNATIONAL maximum value. This is because the GUIDELINES FOR EXPOSURE TO RADIO device is designed to operate at multiple WAVES power levels so as to use only the power Your mobile device is a radio transmitter required to reach the network. In general, and receiver. It is designed and the closer you are to a base station, the manufactured not to exceed the limits lower the power output of the device. for exposure to radio frequency (RF) The highest SAR value for this device recommended by international when tested for use at the ear is guidelines (ICNIRP). These limits are part 0.80 W/kg. of comprehensive guidelines and SAR values may vary depending on establish permitted levels of RF energy national reporting and testing for the general population. The guidelines requirements and the network band. Use were developed by independent scientific of device accessories and enhancements organizations through periodic and may result in different SAR values. thorough evaluation of scientific studies. Additional SAR information may be The guidelines include a substantial provided under product information at safety margin designed to assure the www.nokia-asia.com. safety of all persons, regardless of age * The SAR limit for mobile devices used by and health. the public is 2.0 W/kg averaged over The exposure standard for mobile devices 10 grams of body tissue. The guidelines employs a unit of measurement known as incorporate a substantial margin of the Specific Absorption Rate, or SAR. The safety to give additional protection for SAR limit stated in the international the public and to account for any guidelines is 2.0 watts/kilogram (W/kg)*. variations in measurements. SAR values Tests for SAR are conducted using may vary depending on national standard operating positions with the reporting requirements and the network device transmitting at its highest band. For SAR information in other certified power level in all tested regions, please look under product frequency bands. Although the SAR is information at www.nokia.com. determined at the highest certified

A Call waiting 12 Callback requests 59 About your device viii Calls 34 Access codes x Camera 51 Activation keys 48 Camera key 6 Active standby 7, 36, 38 Camera lens 6 Add a channel 61 Camera settings 52 Add a one-to-one contact 60 Cancel message sending 21 Alarm clock 63 Care and maintenance 85 Answer or reject a video call 13 Certificates 75 Answer or reject a voice call 12 Certification information (SAR) 89 Appearance settings 72 Charge level 7 Application options 67 Charge the battery 3 Applications 67 Charging 79 Audio messages 23 Clock settings 37 Collection 67 B Configuration 46 Barring password x Configuration settings service xi Basic steps to access and use services 70 Connect to a service 70 Battery 79, 83 Connect to the PTT service 57 Installation 1 Connectivity 39 Battery information 79 Contact information xi Bluetooth 39 Contacts 31 Bluetooth settings 40 Convert currency 65 Bluetooth wireless connection 40 Cookies 73 Bluetooth wireless technology 39 Copy contacts 32 Bookmarks 72 Copyright protection 48 Browse pages 71 Countdown timer 65 Browse with phone keys 71 Create an audio message 23 Browser 70 Customer service xi Browser security 73, 75 Business cards 32 D Data communication 78 C Data communication applications 78 Cache memory 74 Data transfer 42 Calculator 65 Data transfer with a compatible Calendar 63 device 43 Call functions 11 Data transfer without SIM card 43 Call key 6 Date settings 37 Call settings 44 Define a storage folder 56

90 Copyright © 2007 Nokia. All rights reserved. Delete contacts 32 Genuine Enhancements 82 Delete messages 27 Get started 1 Dialed numbers 34 Groups 33 Digital rights management 48 Digital signature 76 I Direct calling 72 Image size (multimedia) 28 Display 36 Indicators 9 Download Info messages 27 Applications 68 Infrared 41 Games 67 IR port 6 Protected files 48 Download content and applications xi Download e-mail 25 K Download settings 74 Keyguard 10 Keypad lock 10 E Keys and parts 6 Earpiece 6 Edit contact details 32 L E-mail 29 Launch a game 67 E-mail application 24 Launch an application 67 E-mail folderss 26 Left selection key 38 Emergency calls 88 List of recordings 56 End key 6 Listen to the radio 55 Ending a call 12 Lock the keypad 10 Enhancements ix Log 34 Enhancements settings 46 Loudspeaker 6 Equalizer 56 M F Maintenance service xi Flash messages 23 Make a calendar note 64 Flight mode 35 Make a channel or a group call 58 Flight query 46 Make a one-to-one call 58 FM radio 54 Make a PTT call to multiple recipients 59 Folders 22 Make a video call 13 Font size 37 Make a voice call 11 For your safety vii Make and receive a PTT call 58 Media 51 G Media player 52 Medical devices Gallery 50 Hearing aids 87 Game settings 67 Pacemaker 86 Games 67 Memory card 2, 50 General 27 Memory full 22 General information x Message center number 18

Copyright © 2007 Nokia. All rights reserved. 91 Message counter 34 Packet data connection 42 Message settings 27 Packet data settings 42 Message templates 23 PC Suite 78 Messaging 18 Permissions for a protected file 48 Missed calls 34 Personalize 35, 36 Multimedia message 28 Phone settings 45 Multimedia messages 19, 20 PIN code x Music player 53 Play the music tracks transferred to the Music player settings 53 phone 53 Mute 12 Plug and play service 4 My numbers 33 Potentially explosive environments 87 My shortcuts 38 Power key 6 Power saver 9, 37 N Predictive text input 15 Navigate the menus 17 Presenter 68 Navigation key 38 Profiles 35 Network services viii Progressive download 52 Nokia 616 Car Kit 83 PTT 57 Nokia battery authentication PTT channels 60 guidelines 80 PTT settings 61 Nokia Connectivity Cable CA-53 84 PUK code x Nokia contact information xi Push to talk. See PTT Nokia original enhancements 82 Nokia support xi R Nokia Universal Holder CR-39 83 Radio 54 Normal operating position 4 Read and reply to a multimedia Note alarm 64 message 21 Notes 64 Read and reply to an SMS message 19 Number keys 6 Read and reply to e-mail 25 Receive a bookmark 72 O Receive a flash message 23 Receive a PTT call 59 Operating environment 86 Receive an audio message 24 Operator logo 37 Receive an invitation 61 Operator menu 49 Received calls 34 Options during a video call 14 Record a video clip 51 Options during a voice call 12 Record sound 56 Options while browsing 71 Repair service xi Organizer 63 Respond to a callback request 60 Restore factory settings 48 P Right selection key 38 Packet data 41, 78 Ringing tones 12, 35

92 Copyright © 2007 Nokia. All rights reserved. S Stopwatch 66 Streaming service 52 Safety 86 Support xi Emergency calls 88 Switch on and off 4 Explosive environments 87 Synchronize 43 Hearing aids 87 From PC 43 Medical devices 86 From server 44 Pacemakers 86 Vehicles 87 Save names and phone numbers 31 T Save numbers and text items 31 Take a photo 51 Save radio channels 54 Templates 18 Screen saver 37 Text message and SMS e-mail 27 Scripts over secure connection 73 Text messages (SMS) 18 Search for a contact 31 Themes 35 Security code x Time settings 37 Security module 75 To-do list 64 Security settings 47 Tones 36 Send a callback request 59 Traditional text input 16 Send a message 21 Service and my numbers 33 U Service commands 27 Unlock keypad 10 Service inbox 74 USB data cable 44 Service inbox settings 74 Set the time, time zone, and date 4 Set up a Bluetooth connection 40 V Set up browsing 70 Vehicles 87 Settings 15, 33, 35 Vibrating alert 36 Clock 37 Voice commands 38 Date 37 Voice dialing 11 Time 37 Voice messages 26 Settings Wizard 24 Voice recorder 56 Shared memory ix Volume keys 6 Shortcuts 8 Signal strength 7 W SIM card 1 Wallpaper 35, 36 SIM messages 19 Web 70 SIM services 77 Write a flash message 23 SMS e-mail 19 Write and send an e-mail 25 Spam filter 26 Write and send SMS messages 18 Special characters 16 Writing language 15 Speed dialing 11, 33 Standby mode 7, 36 Y Standby settings 36 Stop the alarm 63 Your phone 6