Spirit 4K® High-Performance Film Scanner with Bones and Datacine®
Total Page:16
File Type:pdf, Size:1020Kb
Product Data Sheet Spirit 4K® High-Performance Film Scanner with Bones and DataCine® Spirit 4K Film Scanner/Bones Combination Digital intermediate production – the motion picture workflow in which film is handled only once for scan- ning and then processed with a high-resolution digital clone that can be down-sampled to the appropriate out- put resolution – demands the highest resolution and the highest precision scanning. While 2K resolution is widely accepted for digital post production, there are situations when even a higher re- solution is required, such as for digital effects. As the cost of storage continues to fall and ultra-high resolu- tion display devices are introduced, 4K postproduction workflows are becoming viable and affordable. The combination of the Spirit 4K high-performance film scanner and Bones system is ahead of its time, offe- ring you the choice of 2K scanning in real time (up to 30 frames per second) and 4K scanning at up to 7.5 fps depending on the selected packing format and the receiving system’s capability. In addition, the internal spatial processor of the Spirit 4K system lets you scan in 4K and output in 2K. This oversampling mode eli- minates picture artifacts and captures the full dynamic range of film with 16-bit signal processing. And in either The Spirit 4K® from DFT Digital Film Technology is 2K or 4K scanning modes, the Spirit 4K scanner offers a high-performance, high-speed Film Scanner and unrivalled image detail, capturing that indefinable film DataCine® solution for Digital Intermediate, Commer- look to perfection. cial, Telecine, Restoration, and Archiving applications. With more than 350 systems shipped worldwide in the past decade, the Spirit has become the undisputed pre- Bones post production ference for telecine and high-speed film scanning ap- workflow solution plications. Now the Spirit 4K® system offers a quantum leap in performance, with a maximum native resoluti- on of 4K and with native 2K scanning available in real time. The Spirit 4K system is available in two basic versions: a high performance film scanner connected to a DFT Bones open post-production system via a high-speed Infiniband interface, which can be upgraded to a full- featured system that includes interfaces for standard- and high-definition (SD and HD) video; and a Data- Cine® which includes SD and HD video outputs and which can be enhanced with a Bones system, including 4K/2K high speed Infiniband data interfaces. Page 1 of 8 www.dft-film.com Product Data Sheet ® Key Features Spirit 4K • Multi-film format, high-resolution, • Real-time scaling engine for sizing High-Performance real-time film scanning and positioning up to 4K output Film Scanner with Bones resolutions and for converting 4K and DataCine® • FA 35 mm and ACA 35 mm 2-perf scans to 2K (digital oversampling) / 3-perf / 4-perf film formats • Film Scanner version: High speed • Scanning head capable of: optical Infiniband data output up - Native 2K scanning up to 30 fps to 4K - Native 4K scanning up to 7.5 fps - DPX file format - Includes Bones Transfer applica- • Safe continuous-motion film trans- tion running on a Linux-based PC port including: - TV-gamma, linear, logarithmic, - Variable scanning speeds user defined transfer characteris- - Visible search tics up to 16-bit quantization - Image monitoring with selectable • Eastman Kodak-designed, high- display look-up tables and reso- resolution, advanced-imaging lutions up to SXGA resolution subsystem: - Diffuse, high-power xenon • DataCine version: Video output illumination system to optically supports all major digital HD and suppress dust and scratches SD formats - Custom precision optics - TV-gamma, linear, and logarith- - Optical film matching for print, mic transfer characteristics negative, and intermediate - Rotation stocks - Contour correction - Optical gain control • Built-in 4K image processing based on a 16-bit RGB data stream for extended black defini- tion (EBD): - Automatic FPN and shading correction - Automatic focus adjustment - Automatic Dmin adjustment - Logarithmic masking - User-definable look-up tables (LUTs) - RGB negative matching - RGB primary color correction with extended color-correction mode - Aperture correction Page 2 of 8 www.dft-film.com Product Data Sheet Spirit 4K DataCine ® Through an internal spatial processor, the Spirit 4K Da- Spirit 4K taCine supports all important digital HD/DTV and SD High-Performance standards in 4:4:4, YUV, or RGB formats, so you can Film Scanner with Bones rapidly output your material to tape or disk. In addition, and DataCine® you can upgrade the Spirit 4K DataCine at any time with a Bones system to deliver image files to a storage system. Unmatched Color Performance At the heart of the Spirit 4K system is the proven con- create a highly diffuse light source. This diffuse light cept of a broad spectrum light source with a precision source has proved highly successful at minimizing the active-feedback loop to ensure consistency of image visible effects of film scratches and even some small output, not just from moment to moment but across dust particles. days, weeks, and months. Spirit DataCine users across the world have demonstrated that a color decision list In digital intermediate work, the normal practice is to can always be recalled with the confidence that it will scan the original camera negative to capture the best be reproduced. possible quality. The high blue content in the xenon light source of the Spirit 4K system is a significant aid The Spirit 4K system uses a long-life 700W xenon in balancing out the orange mask of negative and inter- lamp. Xenon illumination provides a broad and conti- mediate stocks to achieve the most natural, most visu- nuous spectrum of light across the entire visible area, ally satisfying image quality. with an emphasis in the critical short-wavelength blue area. The result is a consistently noise-free image right The Spirit 4K system features new lens gate assem- across the color spectrum, without problems in the blue blies designed for Super 16 mm and full-aperture 35 portion that trouble other film-scanning technologies. mm film that are capable of scanning the Standard and Academy versions. The optical system also includes a Like the original Spirit DataCine system, the xenon filter drawer to allow the use of standard camera filters lamp output passes through an integration cylinder to for optical effects during scanning. The Spirit 4K 4K/2K RGB CCD Optical Path line array Developed in partnership with Eastman Kodak, the Spirit 4K optical path uses a powerful xenon lamp for wide spectrum illumination that passes through an integration cylinder RGB beam splitter for smooth diffuse light, reducing the visibility of scratches and dirt. Effect filter holder Filter Wheel Condenser Lens Projection lens Xenon lamp Lens Lens 700W Film gate block Fast aperture Filter Shutter Cold mirror Dmin filter Page 3 of 8 www.dft-film.com Product Data Sheet Effective Digital Intermediate Workflow ® The Spirit 4K system brings an unmatched efficiency Spirit 4K in creating a digital intermediate (DI) from film. The High-Performance unsurpassed high scanning speeds are complimented Film Scanner with Bones by features to support a smooth and fast scanning pro- and DataCine® cess. The Spirit 4K platform includes a special set of scanner menus for the graphical control panel (GCP). These menus hide typical telecine controls and restrict con- trol to those functions required for a DI transfer. This capability reduces the risk of setting the wrong para- meters during transfers, which are not supervised by a colorist. The PrinterLights option of the Spirit 4K system allows you to generate and store settings for numerous film The AutoFocus feature of the Spirit 4K system automa- stocks. Based on these film stocks and a display calib- tes the focus adjustment process and centers the focus rated to a print look, color correction can be performed corridor on the film emulsion. It offers a fast, easy, and in printer light steps and respective feedback can be accurate way of focusing at the beginning of the scan- given to a director of photography. ning process. The PrinterLights option implements the functional part The matching process can be automated by the of a digital Hazeltine into the Spirit 4K system. It inclu- AutoDmin feature of the Spirit 4K system. It automati- des the generation and storage of color-matching set- cally neutralizes the color differences in the most trans- tings for various film stocks as a reference for the sub- parent part of the film (Dmin) and sets it to the correct sequent printer-lights definition in R, G, B, and master. value for a DI transfer. In a current-settings mode the AutoDmin correction is based on density range (Dmax) You can augment this special DI feature set with an settings taken from film stock or TK memories or from event-list option for scene-by-scene corrections and the a user-defined Matching Lift adjustment. In a densities- Bones system pull list support for list-controlled trans- settings mode you can preset the Dmax in a range of fers based on frame count, timecode, or keycode. 0.1 to 3.5 densities. SpiritSpirit 4K Data4K Application with Bones Data Application with Bones Spirit 4K 4K/2K Data Bones SDTV Film Scanning and Infiniband Transfer Control, Pre Processing Post Processing HDTV and Delivery Perf OptiPin Image Optical Pin Registration Video Master Ethernet (UDP / TCP-IP) CXFS or StorNext or SAN Storage Scanner or local storage GigE, FC, SCSI,… setup and control SVGA Preview 4K/2K Data e.g. back to film Ethernet (UDP / TCP-IP) The combination of the Spirit 4K high-performance film scanner and Bones open post-production system scans film in 2K or 4K resolution, which is then stored on disk using the Bones Transfer and Bones Mover applications.