DOCSLIB.ORG

I from the Library Of: Superior Sewing Machine & Supply

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
I from the Library Of: Superior Sewing Machine & Supply 1 i s t o f P a r t s !'or M o d e l C E - e ~ I SElKO SEWING MACHINE CO., LTD. TOKIO• JAPAN From the library of: Superior Sewing Machine & Supply LLC 28010 .!.rm s haft 28012 Cam 28057 Presser foot 28013 Needle c=ank position set screw (large) 28058 Presser foot set screw and belt guard plate set sere•• 28014 Arm 'shaft bushing (front) 28060 Lever hinge screw 28015 Arm shaft bushing (rear) 28061 lever supporting plate 28016 Arm shaft bushing (front) wa sher 28062 Feed forked connection 28017 Machine pulley 28063 Feed and feed lifting eccentric 28018 !~chine pulley adjusting screw 28064 Feed regulating bar 28019 Mechine pulley key 28065 Feed regulating bar stud 28020 Arm shaft bushing set screw (front) 28066 Feed forked connection slide block 28021 Arm shaft bushing set sc=ew (rear) 28067 Feed regulating collar 280 22 Thread take up lever 28068 Feed regulating collar set screw 28022-A Thread take up lever thread eyelet bushing 28070 Feed forked connection slide block hinge screw nut 28023 Thread take up lever hinge stud 28073 Feed rock s~ft 28024- A Thread take up lever hinge stud set screw 28074 Feed rock shaft stud screw 28025 Thread take up leve.r roller 28075 Feed rock shaft crank connection 28026 Thread take up lever roller hinge screw 28076 Set screw for 28075 28027 Machine pulley set screw 28077 Be 1 t guard body 28029 Needle bar 28078 Belt guard fitting bar 28030 Needle bar connecting stud 28079 Belt guard plate 28031 Needle ·bar connecting stud set screw 28080 Belt guard body-set screw 28032 Needle .crank position set screw (small) 28083 Shuttle race body 28034 Needle bar rock frame 28084 Shuttle race back 28035 Needle bar rock frame stud (upper) 28085 Shuttle race back spring 28036 Needle bar rock frame stud (large ) 28086 Hook cover 28037 Needle bar rock frame stud (small) 28087 Hook cover spring 28038 Needle bar rock frame guide 28088 Hook cover spring set- pin 28039 Needle bar connecting link 28089 Shuttle race body set screw 280.!.0 Needle bar connecting link stud set screw 28090' Bed slide 28041 Heedle bar rock frame stud (small) set screw 28091C Shuttle hook complete 28042 Needle bar rock frame stud (large ) set screw 28091- 1 Shuttle frame 28043 Foot lifter lifting lever set screw 28091-2 Shuttle cylinder 28044 Needle bar rock frame stud (lower) 28091-3 Shuttle cylinder set-pin 28045 Needle bar rock frame stud washer 28091-4 Shuttle cylinder set spring 28047 Presser bar 28091-5 Shuttle cylinder set spring set screw 28048 Presser bar lifting bracket 28091- 6 Thread regulating spring 28049 Presser bar position guide bracket 28091- 7 Set screw for 28091- 6 28050 Presser bar bushing (lower) 28091-8 Set screw for 28091- 1 28051 Tension releasing bar 28092 Bobbin 28052 Tension releasing lever 28093 Oil pad 28054 Presser bar spring - 2 - 28055 Presser bar screw nut From the library of: Superior Sewing Machine & Supply LLC - l - 4094 Set SC:::"o;!n' :.·~ 28095 28095 'iashe::: fo::: 28098 28143 s~~d sc:::ev for 28141 28096 Oscillating rock shaft 28145 Vibrating presser bar connecting l ink 28146 28097 Oscillating rock shaft hin~ pin bushing Connection pin for 28145 28098 Oscillatin5 rock: shaft ::Unge pin 28147 Set sc:::e• for 28145 26099 Oscillating rock: shaft pin 28148 Upper feed rock shaft 28100 •.;asher for 28101 28151 Connection (A) for 28148 28101 Crank connecting rod 28152 Connection (B) set screw for 28148 28102 Cr ank coni!ecting rod cam 28153 Coonection (B) for 28148 28154 Up~e r feed crank connection rod 28103 Set sc:::e~ for 28102 28104 Set sc:::e~ for 26105 28155 Ringe sc:::ew for 28154 28105 Oscillating shaft crank 28157 ·rh=ead guide (center)of face plate 28106 Oscillating sP~t crank slide block 28158 T.hzead guide (lover) of face plate 28107 Slide block pin sc:::ew 28161 ?eed :::egulating plate 28108 Set ring for. 28102 28162 reed :::egula ting collar 28109 Rotating hook shaf t 28163 Feed regulating lever pin screw 28110 Rotating hook shaft bushill€ (front) 28164 ;eed regulating knob 28111 Rotating hook shaft bushing (rear ) 28167 Upper feed connection 28112 Rotating hook shaft collar 28165 !.r::1 cover (front) 28113 Rotating aook shaft bus::llng set screw (front & rear) 28169 Face plate 28114 Shuttle driver 28170 Thread controller spring stop 28116 Feed lifting rock shaft 28171 TU:e - up spring 28119 Feed dog 28172 Take- up spring (extra) 28120 Set sere·" for 28119 28173 Sicie plate (arm) 28121 Throat plate 28174 Side plate (bed) 28122 Set screw for 28121 28175 A= cap 28123 Feed bar 28176 Foot l i fter lif ting lever 28124 Feed bar connection 28177 Foot lifter lifting lever (small) 28125 Feed bar fittings 28178 Pin for 28176 28126 Feed bar connection binge pin (upper) 28179 Spring for 28176 28180 28127 Feed bar coonect~on hinge ?~ (lower) Washer for 28176 28131 Feed driving eccentric 28181 Bobbin vinder bracket 28132 Lifting rock shaft 28182 Bobbin winder shaft stop 28183 Bobbin 'o'ind.er hinge screw 28184 Bobbin ·o'inder shaft driving roller 28135 Lifting eccentric 26185 Bobbin winder shaft 28136 Vibrating presser bar 28186 Bobbin winder returning spring 28137 Vibrating presser foot 28187 Bobbin winder l ever spring 28138 Se t screw for vibrating presser foot 28188 Bobbin winder lever spring stop 28140 Connection for 28141 28189 Bobbin. winder lever 28141 Lifting bell crank - 3 - From the library of: Superior Sewing Machine & Supply LLC- 4 - 28190 Bobbin ·.;inder reg'llating lever spring 10652 Pin- screv nut f or 13055 & tension bracket Washer for lifting eccentric conne cti o~ collar 33158 Bobbin winder lever shaft 10599 28192 Bobbin winder driving collar 10703 '"'asher for lifting eccentric connection binge screw 28193 Bobbin winder rubber ring 10723 Oil wick pr€sser f or 28093 291gB Te!lSion stud (lower) 10728 Binge screw oil wick for 28132 28199 Tension >asher 10754 Screw for 28135 28200 Te:>sion disc 10774 Pi~ for 20072 28201 ·rens i on oil pad 10775 Hinge scre'A for 20072 29202 Tension spring 10776 'oing nut for 20072 28203 Tension regulating thumb nut 10794 Oil cup 29204 Tens ion s t~d nut 147468 Upper feed driving rock sha ft stop col lar 28205 ~e nsion stud vaaher 100624 Set s crev for 147468 ·28206 Tension thumb nut stopper 11067 Nut for 28157 28208 Stop ring for foot lifter lifting lever 11073 Set screv for 28051 11426 Stop ring f or 28035 1402 Presser bar sc=ev 12418 Set screv f or 28175 14-24 Face plate thread guide (upper) Set screv for 28173 1439 lleed.le Se t screv for 28174 4094 Se t screw for 28095 13055 Presser bar lifter .?80~3 Set sere'! for 28063 13076 Nut for 28143 4134 Set screw f or 28192 13134 Ringe screw for 28167 33126 Stop ring for 33158 13330-4 Se t screv for 28181 2067 Set screw for 28050 15053 Hinge screv for 28132 100914 Set screw for 28038 17046 Set screv for 28161 8040 Set screv for 28186 17095 Hing-3 screv stop ring for 28101 6339 Stop screw f or 28140 Stop ring for 28107 8040 Set screw for 28052 Stop ring for 28126 & 28127 Set screw for 28133 18065 Set screv for 28049 Set screv for 1424 Set screv f or 28504 Set screw for 28158 20018 Tension stud Se t screw for 28187 20019 Tension disc Set screw f or 28170 20020 Tension release washer 10514 Lifti ng rock shaft bushing 20023 'iasher f or tension spring 10517 Pin screlof nut for 28132 20024 Tension spring 10559 Set scre"' for 28141 20025 Tension bracket 10566 Set screw for 28131 20072 Lifting eccentric connection 10597 Set screw for 28190 20073 Bearing for 20072 10629 Screw for 28190 20171 Rubber bung for arm - 5 - - 6 - From the library of: Superior Sewing Machine & Supply LLC From the library of: Superior Sewing Machine & Supply LLC EL-oo/o ~ . 2 3 L 5 6 7 ·I 8 9 10 11 l 12 CH-88® t 12.41 8 ~.28070 0 28062 Option 28154 t = 1.0 28115·10 t =1.8 281 15·! 3 "t = 1.6 28Jl5·1 6 t = 1.9 28Jl5·19 281 2807-4 t =2.2 28115-22 ·/ 28073 . \_ \ ~ 281 ll 2807_~ 0- \ ... Q~':'::' ~~~ - \,-::=J \ 28101 ' ~~t=> ] 28lloJ• _} ~~ -~--- 28076 _/ ~~5 11095 ~ :;:;-:00456 . 2,113 . 2811 3 . 28109 28113 28097 - 2a1os \ ~ 28095 . ~28068 . _,28114 , } 281.1-1 - ~ - - ~"ffi--f;l'~099A0941 ..-------'-=-------- --- ·Nll -=--/'~ 280 ~~E~!· 2~~~~~;:o;;;;;;;:;;;;;;;;:;~~/1100456 ,j r , 95 ====28113= = ____.p • . tS:\ ~2{ '-"'---f2S007~ ";;:j) 28 - .., 119· ~28113 ~L28112 ~2810~_9 '&~ L' , '-26021- 096 28120~ £28107 28106 !I . ~w 28127 1.7.095 . 1~~i~:1095~-w~ ~ ~28110\\ (100456 - :H8112 28ll 6 ..... ·:::-- <1.- J(XJ<!5 6 28JJ3J From the library of: Superior Sewing Machine & Supply LLC EL- oo/0 3/? ~'-r----'i~-~~,_-_-_---="""'...."-· ~~~-_L' -_ -_-_'"l3'=-~~~..,._c,::;.::I[,c~~~_ll;.=_..!..:_:____ ___; --==s-/:~~~-~7-~ CH- 88. ® A. :n: . L 28092 t- 1 q u v ol ~ - 13079 -A ·I- ~ WtS7 (~ - 5m/ t~) E IW:B (:J:;n/.J;J) 1915? (~/Jill 194(·•· (5m/ :o> F . 1871 (6lll/ii) G!l . I L ~ i J From the library of: Superior Sewing Machine & Supply LLC 20024 MODEL CH - 8B, 8BV & TH- 8B ************************ THREAD GUIDE,TENSION , ETC . · 20022 ~~"' 20021~ 20023 . 280/ 28203 28205 0Wi99 / I 2s2o; ; - . (JJP. !PAR TS NUMBER 0 E S C R I P T I 0 N PARTS NUMBER D E S C R P T I 0 N I 28168-A FACE PLATE 20018(150326) THREAD CONTROLLER STUD 20019 TENS I ON DISC 20020 TENSION RELEASE: WAS HE R 20021 TENSION THUMB NUT 20022(153672) NUT 20023(143657) WASHER 20024 RELEASE SP RING(THICK) 20025 THREAD GUIDE 28068 SCREW 28204 TENSION STUD NUT 28205 TENSION STUD WASHER 28203 TENSION THUMB NU T 28206 T/THUMB NUT STOPPER 28202 TENSION DISC SPRI NG 28199 TENSION WASH ER 28201 TENSION QI L PAD 1543 TENSION DISC 28199 TENSION WASHER 28198 TENSION STUD (LOWER) 281711 THREAD TAKE UP SPRI NG 28172 REGULA TING SPRING 28209 STOP RING 11067 NUT 28157 THREAD GUIDE(MIDDLE) 8040 PRESSER FOOT SCREW 28170 CONTROLLER SPRING STOP 28068 SCREW 18065 SCREW 28158- A THREAD GUIDE(LOWER) From the library of: Superior Sewing Machine & Supply LLC 70794 \ 70567 "1.8277 '? p · @)rt~ i;2/ 90625 , ~28272 w 28270 \ 28268 8040 \ 0 0 27174 0 \.~ il 0 f ty f(}'2J CD ~ I 70789 70788~ ~28281 30151~ /273 31094 6 -/ ~fiJ/28274 39295 tP-30025 ,<8040 ~ 30025 101520 ~ ~/28266 / ~ ~ 31094 60466 ~ 0 / ~ ~ 28267 28262 @ff@O 60::: 0 35474 ~3018~'--..
Load more

Recommended publications
  • Bobbinwork Basics by Jill Danklefsen
    SPECIAL CLASSROOM EDITION BOBBINWORK BASICS BY JILL DANKLEFSEN obbinwork is a technique that places heavy decorative 4. The type of stitch chosen as well as the type of “bobbin yarn” Bthreads on the surface of the fabric, sewn as machine-fed selected will dictate how loose the tension needs to be adjusted decorative stitches or as freemotion stitches. Typically, these on the bobbin case. threads, yarns, and cords are too large to fit through the eye of the sewing machine needle. So, in order to achieve a “stitched 5. Remember the rule of tension adjustment --“Righty, Tighty -- look”, you sew with the heavy decorative thread wound onto a Lefty, Loosey” bobbin and placed in the bobbin case of the machine. 6. Use a “construction quality” thread on the “topside” of your machine, as the needle tension will usually be increased. Think of the top thread as literally pulling the “bobbin yarn” into place to form the stitch pattern. 7. Bobbins can be wound by hand or by machine. Whenever possible, wind the bobbin using the bobbin winder mechanism on the machine. This will properly tension the “bobbin yarn” for a better stitch quality. 8. Bobbinwork can be sewn with the Feed dogs up or down. If stitching freemotion, a layer of additional stabilizer or the use of a machine embroidery hoop may be necessary. 9. Select the proper presser foot for the particular bobbinwork YARNS AND THREADS SUITABLE FOR BOBBINWORK technique being sewn. When working with the heavier “bobbin yarns”, the stitches produced will be thicker. Consider selecting • Yarns (thinner types, often a foot with a large indentation underneath it, such as Foot used for knitting machines) #20/#20C.This foot will ride over the stitching much better.
    [Show full text]
  • Powerhouse Museum Lace Collection: Glossary of Terms Used in the Documentation – Blue Files and Collection Notebooks
    Book Appendix Glossary 12-02 Powerhouse Museum Lace Collection: Glossary of terms used in the documentation – Blue files and collection notebooks. Rosemary Shepherd: 1983 to 2003 The following references were used in the documentation. For needle laces: Therese de Dillmont, The Complete Encyclopaedia of Needlework, Running Press reprint, Philadelphia, 1971 For bobbin laces: Bridget M Cook and Geraldine Stott, The Book of Bobbin Lace Stitches, A H & A W Reed, Sydney, 1980 The principal historical reference: Santina Levey, Lace a History, Victoria and Albert Museum and W H Maney, Leeds, 1983 In compiling the glossary reference was also made to Alexandra Stillwell’s Illustrated dictionary of lacemaking, Cassell, London 1996 General lace and lacemaking terms A border, flounce or edging is a length of lace with one shaped edge (headside) and one straight edge (footside). The headside shaping may be as insignificant as a straight or undulating line of picots, or as pronounced as deep ‘van Dyke’ scallops. ‘Border’ is used for laces to 100mm and ‘flounce’ for laces wider than 100 mm and these are the terms used in the documentation of the Powerhouse collection. The term ‘lace edging’ is often used elsewhere instead of border, for very narrow laces. An insertion is usually a length of lace with two straight edges (footsides) which are stitched directly onto the mounting fabric, the fabric then being cut away behind the lace. Ocasionally lace insertions are shaped (for example, square or triangular motifs for use on household linen) in which case they are entirely enclosed by a footside. See also ‘panel’ and ‘engrelure’ A lace panel is usually has finished edges, enclosing a specially designed motif.
    [Show full text]
  • Needle Arts 3 11628.Qxd
    NEEDLE ARTS 3 PACK 11628 • 20 DESIGNS NX670 Flowered Hat Pins NX671 Handmade With Love By NX672 Sewing Bobbin Machine NX673 Rotary Cutter 2.11 X 3.89 in. 3.10 X 2.80 in. 2.49 X 2.50 in. 3.89 X 1.74 in. 53.59 X 98.81 mm 78.74 X 71.12 mm 63.25 X 63.50 mm 98.81 X 44.20 mm 4,587 St. 11,536 St. 10,818 St. 10,690 St. NX674 Dressmaker’s Shears NX675 Thread NX676 Sewing Border NX677 Tracing Wheel 3.89 X 1.88 in. 2.88 X 3.89 in. 5.00 X 2.19 in. 3.46 X 1.74 in. 98.81 X 47.75 mm 73.15 X 98.81 mm 127.00 X 55.63 mm 87.88 X 44.20 mm 7,892 St. 15,420 St. 16,465 St. 3,282 St. NX678 Sewing Angel NX679 Tomato Pincushion NX680 Measuring Tape NX681 Sewing Kit 3.76 X 3.21 in. 3.59 X 3.76 in. 3.69 X 1.78 in. 3.89 X 3.67 in. 95.50 X 81.53 mm 91.19 X 95.50 mm 93.73 X 45.21 mm 98.81 X 93.22 mm 20,593 St. 16,556 St. 8,410 St. 22,777 St. NX682 Iron & Ironing Board NX683 Sewing Machine Needle NX684 Needle Thread NX685 Embroidery Scissors 3.79 X 1.40 in. 1.57 X 2.89 in. 1.57 X 3.10 in. 3.00 X 2.58 in.
    [Show full text]
  • ONE-STEP BOBBIN REPLACEMENT FEATURES QUICK-SET TOP BOBBIN the Easy-To-View Window Tells You at a Glance When More Thread Is Need
    ONE-STEP BOBBIN REPLACEMENT FEATURES QUICK-SET TOP BOBBIN The easy-to-view window tells you at a glance when more thread is needed in your bobbin. Simply drop in a full bobbin and the Quickset feature has you ready to sew immediately. F.A.S.T. BOBBIN WINDING SYSTEM Brother's use of the latest technology has made their sewing machines even easier to use. To wind the bobbin, just wind the thread around the bobbin a few times, pass it through the slit in the bobbin winder seat and press the START/STOP button. No need to cut off the excess thread or stop the sewing machine when the bobbin is full. START/STOPBUTTON The gentle sewing start lets you use the machine with confidence with or without the electronic foot control. EASY-TO-USE SPEED ADJUSTMENT The speed adjustment lever lets you smoothly adjust the operation speed from low speed and high speed. Enjoy the freedom of being able to adjust the sewing speed while you sew! F.A.S.T. NEEDLE-THREADING SYSTEM Fast and simple threading says it all! Saves time and your eyesight, by automatically feeding the thread through the needle's eye. STITCH LENGTH / WIDTH ADJUSTMENT Adjustments for stitch length; stitch width and variable needle position make sewing fine details fast and easy. Quilters will love the variable needle position for adjusting the seam allowance. 1-STEP AUTOMATIC BUTTONHOLER 1-Step "Auto-size" buttonholer creates a perfectly uniform buttonhole every time. Simply dial the stitch and follow the directions to sew all four sides of the buttonhole without moving a lever.
    [Show full text]
  • Tips for Minimizing Embroidery Interruptions
    TECHNICAL BULLETIN TIPS FOR MINIMIZING EMBROIDERY INTERRUPTIONS Sewing interruptions can be caused by many factors, however the most common causes include the following: • Needle Thread Breakage or Pull-out – not picking up at the beginning of a stitch pattern • Bobbin Thread Run-out or Thread Pick-Up – not picking up at the beginning of a stitch pattern • Improper Thread Trimming • Thread break detector stoppage In order to minimize interruptions during the stitching of complex embroidery patterns, the following vital elements must work together during the embroidery process. These vital elements include: • Proper Digitizing for the fabric and pattern being sewn • Proper Embroidery Machine Maintenance and Settings • Correct Backings and/or Toppings for the Application • Proper Needle Type and Size • Quality Embroidery Threads We will look at each of these elements and discuss potential causes for excessive sewing interruptions. A. INTERRUPTIONS DUE TO NEEDLE THREAD BREAK Digitizing Causes: • Improper cornering with too many stitches in the same location • Not using appropriate underlay stitches that help minimize flagging during the rest of the stitch pattern • Density properties too high within designs that layer many colors of thread • Not using Tie-In Stitches at beginning of thread changes • Not using Short Stitches at the end of a stitching cycle Digitizing Solutions: • Try to minimize the stitch density at any one point. TECHNICAL BULLETIN • Reduce density properties as you build up layers of embroidery • On lettering, use your “short-stitch” function • Use appropriate underlay stitches that help minimize flagging • Use slower speed “Tie-In” Stitches at beginning of thread changes • Use slower speed “Tie-Off” Stitches at the end of a stitching cycle.
    [Show full text]
  • Instruction Manual for Sewing Machine
    f2D /3a INSTRUCTION MANUAL FOR I SEWING MACHINE EL3-1© j WHITE’ _____________________________________ WHITE SEWING MACHINE COMPANY Record in space provided below the Serial No. and Model No. of this appliance. The Serial No. is located on Bed Plate. The Model No. is located on Rating Plate. Serial No. Model No. Retain these numbers for future reference. 21&22 CONTENTS Name of Parts 1 & 2 Accessories 3 Before sewing (Power supply and Sewing lamp) 4 Take out extension table, free arm sewing 5 Winding the bobbin 6 Removing bobbin case and bobbin 7 Inserting bobbin into bobbin case 7 Inserting bobbin case into shuttle race 8 Threading upper thread & Twin needle threadg. 9 Drawing up bobbin thread 10 Changing sewing directions 10 Control dial & Adjusting thread tension 11&12 Regulating the presser foot pressure 13 Drop feed 13 Changing needle 14 Fabric. Thread. Needle table 15 Sewing (pattern selector) and operation table 16 To start sewing 17 To finish seam 18 Straight stitch 19 Zigzag sewing 19 Overcasting 20 Stretch stitch 20 Blind stitch Button sewing 23 Binding 23 Zipper sewing 24 Button hole sewing 25 Hemming 26 Twin Needle 27 Embroidery 27 Quilter 28 Seam guide 28 Maintenance (Cle.ning and oiling) 29 Checking Performance Problems WHAT TO DO 30 NAME OF PARTS (FRONT VIEW) 1 Pattern selector dial 8 Sub-spool pins 2 Pressure regulator 9 Top cover 3 Take up lever 10 Zigzag width dial 4 Thread tension dial 1 1 Stitch length dial 5 Presser foot 12 Reverse button 6 Shuttle cover 13 Thread guide for upper 7 Extension table threading —1— (REAR VIEW) Bobbin winder spindle Bobbin winder stopper Upper thread guide Stop Motion knob Hand wheel Face cover Thumb screw Needle plate Presser foot lever —2— ACCESSOR I ES / Bobbin Felt Zigzag foot Button hole (On machine) foot Button foot Machine Oil / Zipper foot 0 Button hole cutter Screw driver Needle #11 #14 —3— BEFORE SEWING 1.
    [Show full text]
  • Download MOD-100 Manual
    Instruction Book IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: This sewing machine is designed and manufactured for household use only. Read all instructions before using this sewing machine. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. 2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recommended by the manufacturer as contained in this owner’s manual. 3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot controller free from accumulation of lint, dust and loose cloth. 5. Never drop or insert any object into any opening. 6. Do not use outdoors. 7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
    [Show full text]
  • Bobbin Lace Class Handout (PDF)
    Beginning Bobbin Lace By Tim & Debbie Coyle Brief History It’s difficult to tell the early history of most fiber arts, as the fabrics are lost through reuse of the materials or deterioration. Bobbin lace is documented as far back as the 15th century in Italy. The technique spread quickly and widely after that. By the end of the 16th century Spain was producing colored silk laces as well as gold and silver laces. The Scandinavian counties and Germany were also very influential in furthering bobbin lace. Although lace is often thought of as adorning ecclesiastical fabrics and the garments of the wealthy and titled, peasants were numbered among the people making and wearing bobbin lace. In Eastern Europe they were responsible for keeping the technique alive, their laces were sophisticated and developed into very personal designs. Materials Pillow The pillow is the working platform for your lace. Pillows come in many shapes and sizes, and are made of many different materials, from straw or fabric scraps contained in a fabric covering, to different types of foam covered in fabric. What they all have in common is a firm but yielding texture that allows pins to go in easily and stay in place without wobbling. This kit contains a close cell foam block that works well to keep the pins in position. Rather than covering the foam with fabric, we have covered the top with the pricking pattern and instructions. You might want to buy some cotton quilting fabric, cut it to size, and pin it on to cover all sides of the foam.
    [Show full text]
  • Instruction Manual INDICE SECTION 1
    Instruction Manual INDICE SECTION 1. ESSENTIAL PARTS Name of Parts ................................................................................................................. 2 SECTION 2. GETTING READY TO SEW Extension Table ............................................................................................................... 3 Standard Accessories ..................................................................................................... 3 Accessories Storage Box ................................................................................................ 3 Connecting the Machine to the Power Supply ................................................................ 4 Foot Control ....................................................................................................................4 Presser Foot Lifter........................................................................................................... 5 To Attach and Remove the Presser Foot ........................................................................ 5 Changing Needle ............................................................................................................ 6 Thread and Needle Chart ............................................................................................... 6 Setting Spool Pins ........................................................................................................... 7 Removing or Inserting the Bobbin Case ........................................................................
    [Show full text]
  • 4-H CDM Skill-A-Thon Sewing & Clothing ID
    4-H CDM Skill-a-Thon Sewing & Clothing ID The photos shown here are only one option of what an item may look like. Other options are available. Revised November 2020 Batik - Indonesian technique of wax resist dyeing applied to whole cloth. This technique originated from Java, Indonesia. It is made either by drawing dots and lines of the resist with a spouted tool called a tjanting, or by printing the resist with a copper stamp called a cap. Broadcloth - A very lightweight, smooth, flat looking fabric, with no pattern in the weave of the threads. It is similar in quality to pinpoint fabric but has less texture. This usually means it is slightly more transparent and not as shiny as the pinpoint. Chambray - A plain weave fabric woven with a colored yarn in the warp and a white yarn in the weft. Corduroy - A fabric with a distinct pattern, a “cord” or wale. It is mostly composed of tufted cords, sometimes exhibiting a channel (bare to the base fabric) between the tufts. Cotton - A fabric made from the fiber of its namesake plant. It is good for first time sewers to use because it’s easy to work with and used for everyday clothing. Eyelet - A type of fabric that has holes that are edged using a buttonhole stitch. The holes are precisely sized and situated to create a pattern or patterns, often floral designs or abstract geometric arrangements. Faux Fur - A fabric fashioned to simulate genuine animal hair. It is known as a pile fabric and is typically made from polymeric fibers that are processed, dyed, and cut to match a specific texture and color.
    [Show full text]
  • SM024 Instruction Book
    INSTRUCTION MANUAL SM024 This household sewing machine is designed to comply with IEC/EN/CSA C22.2 No.60335-1 & 60335-2-28 and UL1594. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is given to a third party. DANGER - TO REDUCE THE RISK OF ELECTRIC SHOCK: • A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning, removing covers, lubricating or when making any other user servicing adjustments mentioned in the instruction manual. WARNING - TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON: • Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. • Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. • Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized service center for examination, repair, electrical or mechanical adjustment. • Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.
    [Show full text]
  • Troubleshooting Embroidery Designs Written By: Kay Hickman, BERNINA Educator, Professional & Home Embroidery Specialist
    BERNINA eBook Series JUST EMBROIDER IT! Troubleshooting Embroidery Designs Written by: Kay Hickman, BERNINA Educator, Professional & Home Embroidery Specialist Qualities of a Good Design § Maintenance Proper Setup § Problem / Solution Scenarios § Pressing Matters There is nothing quite as satisfying as stitching a perfect embroidery design for that special project. But it can also be frustrating when things go wrong. In order to troubleshoot and fix embroidery design problems, we need to first understand the qualities of a good design and how preventative maintenance can prevent a lot of issues from occurring in the first place. QUALITIES OF A GOOD DESIGN • The fabric is smooth and pucker-free around the outer edges of the design. • There are no traces of the bobbin thread showing on the top side. • There is no gapping between individual elements of a design or between the fill stitches and the design outlines. BACK SIDE • On the back (bobbin) side, you should see the bobbin thread. You should also see the needle threads around the edges of a fill or either side of a column type design. FRONT SIDE MAINTENANCE Preventative maintenance can go a long way to aid in getting a good stitch out. • Clean the machine every 3 to 4 hours of stitching time. This is especially crucial because the high speed of the embroidery creates more lint and fuzz than you encounter during normal sewing. Remove BEFORE HOOK OIL AFTER HOOK OIL all fuzz and check for tiny bits of thread that might • Follow the manufacturer’s suggestions and take be stuck in the bobbin case.
    [Show full text]