GIGABYTE Aorus Ultra Lga 1200 Atx Motherboard
Total Page:16
File Type:pdf, Size:1020Kb
Z490 AORUS ULTRA User's Manual Rev. 1001 12ME-Z49UTRA-1001R For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment. Copyright © 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations: For quick set-up of the product, read the Quick Installation Guide included with the product. For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: https://www.gigabyte.com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information. Example: Table of Contents Z490 AORUS ULTRA Motherboard Layout .....................................................................4 Z490 AORUS ULTRA Motherboard Block Diagram .........................................................5 Chapter 1 Hardware Installation .....................................................................................6 1-1 Installation Precautions .................................................................................... 6 1-2 Product Specifications ...................................................................................... 7 1-3 Installing the CPU .......................................................................................... 11 1-4 Installing the Memory ..................................................................................... 11 1-5 Installing an Expansion Card ......................................................................... 12 1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Configuration .............................. 12 1-7 Back Panel Connectors .................................................................................. 13 1-8 Internal Connectors ........................................................................................ 15 Chapter 2 BIOS Setup ..................................................................................................26 2-1 Startup Screen ............................................................................................... 26 2-2 The Main Menu .............................................................................................. 27 2-3 Favorites (F11) ............................................................................................... 28 2-4 Tweaker .......................................................................................................... 29 2-5 Settings .......................................................................................................... 34 2-6 System Info. ................................................................................................... 39 2-7 Boot ................................................................................................................ 40 2-8 Save & Exit ..................................................................................................... 43 Chapter 3 Appendix ......................................................................................................44 3-1 Configuring a RAID Set .................................................................................. 44 3-2 Installing an Intel® Optane™ Memory .............................................................. 46 3-3 Drivers Installation .......................................................................................... 48 3-4 Debug LED Codes ......................................................................................... 49 Regulatory Notices .................................................................................................... 53 Contact Us ................................................................................................................ 56 - 3 - Z490 AORUS ULTRA Motherboard Layout SYS_FAN1 ATX_12V_2X4 CPU_OPT LED_C2 D_LED2 (Note) USB20_1 ATX_12V_2X2 CPU_FAN CNVI DB_PORT ATX USB20_2 USB 2.0 Hub LGA1200 U32 HDMI EC_TEMP1 U32G2 U32G2C U32G2_LAN SYS_FAN6_PUMP SYS_FAN2 Z490 AORUS ULTRA AUDIO Intel® GbE LAN F_U32 110 80 60 42 M2P_SB PCIEX16 F_U32C DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2 BAT THB_C2 Intel® Z490 110 80 60 42 THB_C1 M2A_CPU PCIEX8 5 34 1 2 0 CODEC iTE® 110 80 60 42 M_BIOS SATA3 M2M_SB Super I/O PCIEX4 EC_TEMP2 USB 2.0 Hub QFLED CLR_CMOS F_AUDIOD_LED1 SPI_TPM F_USB1 QFLASH_ SYS_FAN4 F_PANEL CPU DRAM PLUS VGA BOOT LED_C1 F_USB2 NOISE_ SYS_FAN3 SYS_FAN5_ SENSOR PUMP Box Contents 5 Z490 AORUS ULTRA motherboard5 Four SATA cables 5 Motherboard driver disc5 One antenna 5 User's Manual5 One G Connector 5 Quick Installation Guide5 One noise detection cable 5 Two RGB LED strip extension cables5 Two thermistor cables * The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. (Note) For debug code information, please refer to Chapter 3. - 4 - Z490 AORUS ULTRA Motherboard Block Diagram PCI Express 3.0 Bus CPU CLK+/- (100~500 MHz) Switch DDR4 3200/2933/2666/2400/2133 MHz x16 x16 LGA1200 CPU DDI or HDMI 1.4 2 PCI Express x8 1 PCI Express x16 DMI 3.0 BIOS SPI M2A_CPU Bus TPM LPC ® M2P_SB iTE Bus Super I/O 4 SATA 6Gb/s 2 USB Type-C™, (SATA3 0~3) USB 3.2 Gen 2 Intel® Z490 3 USB 3.2 Gen 2 SATA3 Type A 4/5 M2M_SB LAN or RJ45 4 USB 3.2 Gen 1 Intel® M.2 CNVi PCI Express x4 Switch 2.5GbE LAN WIFI x4x4 x1 x1 USB 2.0 Hub 8 USB 2.0/1.1 PCI Express 3.0 Bus CODEC MIC Line In Line Out S/PDIF Out Speaker Out Center/Subwoofer Rear Speaker Out - 5 - Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. • Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation. • Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components. • When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely. • When handling the motherboard, avoid touching any metal leads or connectors. • It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity. • Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container. • Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off. • Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard. • Before using the product, please verify that all cables and power connectors of your hardware components are connected. • To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components. • Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing. • Do not place the computer system on an uneven surface. • Do not place the computer system in a high-temperature or wet environment. • Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user. • If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. • If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions. - 6 - 1-2 Product Specifications CPU Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/ Intel® Celeron® processors in the LGA1200 package (Go to GIGABYTE's website for the latest CPU support list.) L3 cache varies with CPU Chipset Intel® Z490 Express Chipset Memory 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory Dual channel memory architecture Support for DDR4 3200/2933/2666/2400/2133 MHz memory modules * To support a DDR4 3200 MHz, you must use XMP memory. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC Un-buffered