DOCSLIB.ORG

Hitachi Smart Camera, Models 600 and 800

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hitachi Smart Camera, Models 600 and 800 Meet your outdoor video intelligence and management objectives with Hitachi Smart Camera, models 600 and 800. Easily deployable, these outdoor models are built to handle varied environmental conditions. DATASHEET Hitachi Smart Camera: Models 600 and 800 Hitachi Smart Camera, models 600 and 800, are all-in-one edge video intelligence solutions, providing real-time video data ingest, analyt- ics and storage at the edge (see Figure 1). Designed for outdoor environments, these Smart Cameras are easily deployable and provide complete remote monitoring, climate control and data management capabilities. They support multiple camera and video management system (VMS) vendors. Designed for Outdoor Environments Smart Camera models 600 and 800 are perfect for city, port, rail, large facilities or remote location deployments. They are engineered to be deployed quickly and easily, and have minimal on-site Figure 2. Inside Hitachi Smart Camera 600 serviceability requirements. Designed to sustain multiple environmental conditions, Hitachi’s Smart Camera models 600 and 800 operate in extreme temperatures. Both feature a smart power board to sup- port multiple DC power outlets that can be monitored and manipulated remotely. A smart AC cooling system keeps the temperature at proper environmental Smart Camera Smart Camera 600 800 Figure 1. Hitachi Smart Cameras: All-in-One Figure 3. Inside Hitachi Smart Camera 800 Edge Video Intelligence Solutions thresholds and can also be remotely mon- PRODUCT HIGHLIGHTS itored. Multiple options for connection into the unit are available, including physical, Hitachi Smart Camera models 600 and Multiple Connectivity Options cellular, Wi-Fi and point-to-point wireless. 800 offer the following: Support physical, cellular, Wi-Fi and point- Multiple Vendor VMS Support to-point wireless connections. Camera and Software Support most VMSs, including Remote Management Integrations Milestone, OnSSI, HVMS and others. Support control all of internal devices, includ- Smart Camera models 600 and 800 are Hitachi Video Analytics Support ing camera, PC, router and power, remotely. video intelligence platforms that integrate with products of leading camera manu- With Hitachi Video Analytics (HVA), Local Recording facturers, including Axis, Sony and others. Smart Cameras support multiple video Record video on the local PC. analytics options, including activity visu- Smart Cameras support multiple VMSs, Power Over Ethernet alizer, intrusion detector, object detector including Milestone, OnSSI and Hitachi Provide Power over Ethernet (PoE) capa- and others to provide insights and alerts. Video Management Software (HVMS). With bilities to external devices. x86 processor compute on board, the units Multiple Vendor Camera Support Extreme Weather Condition Support can run Hitachi Video Analytics to provide Support Axis, Sony and others. the most advanced video intelligence capa- With temperature control capabilities, bilities right on the edge. Smart Camera the units support extremely cold or hot models 600 and 800 can distribute PoE temperatures. for third-party devices that can connect through seal-tight connectors from the out- TECHNICAL SPECIFICATIONS side of the enclosure (see Figures 2 and 3), Camera Specification Supports Axis, Sony, HikVision PTZ and fixed cameras, as well as wireless or cellular connectivity others available upon request. capabilities. VMS Support Hitachi Video Management System, Genetec, Milestone, OnSSI, others Carrier Connectivity 3G, 4G, 4G-LTE support with multiple LTE bands that support LTE, xLTE and LTE2 Carrier Support AT&T, Verizon, T-Mobile, Sprint, others Wireless IEEE 802.11n 2.4GHz wireless, P2P wireless support capabilities Networking Cradlepoint router, Ubiquiti ToughSwitch Power Management Yes Capabilities Temperature Control Yes GPS Capabilities Yes MiniPC Intel NUC (i5 Processor, 8GB RAM, 1TB Drive) Hitachi Video Yes Analytics Support Hitachi Visualization Yes Suite Support Certifications UL, FCC, PTCRB, CE Power 120/220 AC Hitachi Vantara Corporate Headquarters Contact Information 2535 Augustine Drive USA: 1-800-446-0744 Santa Clara, CA 95054 USA Global: 1-858-547-4526 HitachiVantara.com | community.HitachiVantara.com HitachiVantara.com/contact HITACHI is a trademark or registered trademark of Hitachi, Ltd. All other trademarks, service marks, and company names are properties of their respective owners. DS-485-B BTD February 2019.
Load more

Recommended publications
  • Japanese Manufacturing Affiliates in Europe and Turkey
    06-ORD 70H-002AA 7 Japanese Manufacturing Affiliates in Europe and Turkey - 2005 Survey - September 2006 Japan External Trade Organization (JETRO) Preface The survey on “Japanese manufacturing affiliates in Europe and Turkey” has been conducted 22 times since the first survey in 1983*. The latest survey, carried out from January 2006 to February 2006 targeting 16 countries in Western Europe, 8 countries in Central and Eastern Europe, and Turkey, focused on business trends and future prospects in each country, procurement of materials, production, sales, and management problems, effects of EU environmental regulations, etc. The survey revealed that as of the end of 2005 there were a total of 1,008 Japanese manufacturing affiliates operating in the surveyed region --- 818 in Western Europe, 174 in Central and Eastern Europe, and 16 in Turkey. Of this total, 291 affiliates --- 284 in Western Europe, 6 in Central and Eastern Europe, and 1 in Turkey --- also operate R & D or design centers. Also, the number of Japanese affiliates who operate only R & D or design centers in the surveyed region (no manufacturing operations) totaled 129 affiliates --- 125 in Western Europe and 4 in Central and Eastern Europe. In this survey we put emphasis on the effects of EU environmental regulations on Japanese manufacturing affiliates. We would like to express our great appreciation to the affiliates concerned for their kind cooperation, which have enabled us over the years to constantly improve the survey and report on the results. We hope that the affiliates and those who are interested in business development in Europe and/or Turkey will find this report useful.
    [Show full text]
  • 1 April 28, 2010 Kawasaki Heavy Industries, Ltd. Hitachi Construction
    April 28, 2010 Kawasaki Heavy Industries, Ltd. Hitachi Construction Machinery Co., Ltd. KCM Corporation Regarding Hitachi Construction Machinery’s Equity Stake in KCM Corporation Kawasaki Heavy Industries, Ltd. (KHI), KHI’s wholly owned subsidiary KCM Corporation (KCM) and Hitachi Construction Machinery Co., Ltd. (HCM) have reached an agreement under which HCM will acquire an equity stake in KCM through a third-party capital increase by around June 2010. 1. Purpose of Equity Stake HCM’s investment in KCM is aimed at building a strong cooperative relationship between HCM and KCM in accordance with an agreement concluded in October 2008 by KHI and HCM to form a business alliance with respect to their wheel loader businesses. As a result of the recent investment, KHI will hold a 66% share in KCM and HCM a 34% share. 2. Current State of Business Alliance and Future Initiatives (1) Current State of Business Alliance Following the aforementioned agreement to form a business alliance in the wheel loader business, KCM and HCM have been building a structure for mutual cooperation in development, procurement, production and sales. This includes the joint development of new model wheel loaders that comply with (Tier 4) emissions regulations (scheduled to take effect in 2011) and mutually supplying existing models on an OEM basis. (2) Future Initiatives As a result of HCM’s recent investment, the companies will strive to forge even closer ties in the areas of development, procurement, production and sales. Particularly in joint development and shared production, which will serve as the core of business operations, besides accelerating the development of products that adhere to Tier 4 emissions regulations, the companies will strive to develop new models for emerging markets, work to further develop products that comply with successive future phases of 1 emissions regulations, strengthen competitiveness and expand sales.
    [Show full text]
  • Defendants and Auto Parts List
    Defendants and Parts List PARTS DEFENDANTS 1. Wire Harness American Furukawa, Inc. Asti Corporation Chiyoda Manufacturing Corporation Chiyoda USA Corporation Denso Corporation Denso International America Inc. Fujikura America, Inc. Fujikura Automotive America, LLC Fujikura Ltd. Furukawa Electric Co., Ltd. G.S. Electech, Inc. G.S. Wiring Systems Inc. G.S.W. Manufacturing Inc. K&S Wiring Systems, Inc. Kyungshin-Lear Sales And Engineering LLC Lear Corp. Leoni Wiring Systems, Inc. Leonische Holding, Inc. Mitsubishi Electric Automotive America, Inc. Mitsubishi Electric Corporation Mitsubishi Electric Us Holdings, Inc. Sumitomo Electric Industries, Ltd. Sumitomo Electric Wintec America, Inc. Sumitomo Electric Wiring Systems, Inc. Sumitomo Wiring Systems (U.S.A.) Inc. Sumitomo Wiring Systems, Ltd. S-Y Systems Technologies Europe GmbH Tokai Rika Co., Ltd. Tram, Inc. D/B/A Tokai Rika U.S.A. Inc. Yazaki Corp. Yazaki North America Inc. 2. Instrument Panel Clusters Continental Automotive Electronics LLC Continental Automotive Korea Ltd. Continental Automotive Systems, Inc. Denso Corp. Denso International America, Inc. New Sabina Industries, Inc. Nippon Seiki Co., Ltd. Ns International, Ltd. Yazaki Corporation Yazaki North America, Inc. Defendants and Parts List 3. Fuel Senders Denso Corporation Denso International America, Inc. Yazaki Corporation Yazaki North America, Inc. 4. Heater Control Panels Alps Automotive Inc. Alps Electric (North America), Inc. Alps Electric Co., Ltd Denso Corporation Denso International America, Inc. K&S Wiring Systems, Inc. Sumitomo Electric Industries, Ltd. Sumitomo Electric Wintec America, Inc. Sumitomo Electric Wiring Systems, Inc. Sumitomo Wiring Systems (U.S.A.) Inc. Sumitomo Wiring Systems, Ltd. Tokai Rika Co., Ltd. Tram, Inc. 5. Bearings Ab SKF JTEKT Corporation Koyo Corporation Of U.S.A.
    [Show full text]
  • Sony Kabushiki Kaisha
    UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 Form 20-F n REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR 12(g) OF THE SECURITIES EXCHANGE ACT OF 1934 or ¥ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended March 31, 2010 or n TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from/to or n SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 Date of event requiring this shell company report: Commission file number 1-6439 Sony Kabushiki Kaisha (Exact Name of Registrant as specified in its charter) SONY CORPORATION (Translation of Registrant’s name into English) Japan (Jurisdiction of incorporation or organization) 7-1, KONAN 1-CHOME, MINATO-KU, TOKYO 108-0075 JAPAN (Address of principal executive offices) Samuel Levenson, Senior Vice President, Investor Relations Sony Corporation of America 550 Madison Avenue New York, NY 10022 Telephone: 212-833-6722, Facsimile: 212-833-6938 (Name, Telephone, E-mail and/or Facsimile Number and Address of Company Contact Person) Securities registered or to be registered pursuant to Section 12(b) of the Act: Title of Each Class Name of Each Exchange on Which Registered American Depositary Shares* New York Stock Exchange Common Stock** New York Stock Exchange * American Depositary Shares evidenced by American Depositary Receipts. Each American Depositary Share represents one share of Common Stock. ** No par value per share. Not for trading, but only in connection with the listing of American Depositary Shares pursuant to the requirements of the New York Stock Exchange.
    [Show full text]
  • IMX294CJK Diagonal 21.63 Mm (Type 4/3) Approx
    IMX294CJK Diagonal 21.63 mm (Type 4/3) Approx. 10.71M-Effective Pixel Color CMOS Image Sensor High-Sensitivity Type 4/3 CMOS Image Sensor that Supports 4K for Security Camera and Industrial Applications Sony Semiconductor Solutions Corporation has commercial- 10-bit output mode). In addition, use of a large-size pixel ized the "IMX294CJK" Type 4/3 back-illuminated CMOS image achieves SNR1s of 0.14 lx*1, and use of a Quad Bayer pixel sensor with approximately 10.71M-effective pixels for the structure (see Figure 1) realizes an HDR (High Dynamic expanding security camera market. Range) function with no time difference, enabling video imag- The "IMX294CJK" is the first in-house image sensor for security ing with a wide dynamic range. cameras to adopt the Type 4/3 format, and realizes output of *1: Low illuminance performance index advocated by Sony for image sensors for industrial the number of pixels needed for 4K at 120 frame/s (in ADC applications ■ Large-size optical format (Type 4/3) *Exmor R is a trademark of Sony Corporation. The Exmor R is a Sony's CMOS image sensor with significantly ■ Supports 4K output at 120 frame/s enhanced imaging characteristics including sensitivity and low noise by changing fundamental structure of ExmorTM pixel adopted column parallel A/D converter to back-illuminated type. ■ High sensitivity (SNR1s = 0.14 lx) ■ High-speed interfaces (CSI-2/SLVS-EC*2) ■ Supports Quad Bayer Coding HDR *STARVIS is a trademark of Sony Corporation. The STARVIS is back-illuminated pixel technology for CMOS image sensors for surveillance camera applications.
    [Show full text]
  • PUBLIC SUBMISSION Posted: November 20, 2020 Tracking No
    Page 1 of 2 As of: 11/23/20 10:03 AM Received: November 18, 2020 Status: Posted PUBLIC SUBMISSION Posted: November 20, 2020 Tracking No. 1k4-9k60-8cjw Comments Due: December 03, 2020 Submission Type: Web Docket: PTO-C-2020-0055 Request for Comments on Discretion to Institute Trials Before the Patent Trial and Appeal Board Comment On: PTO-C-2020-0055-0001 Discretion to Institute Trials Before the Patent Trial and Appeal Board Document: PTO-C-2020-0055-0452 Comment from Japan Business Machine and Information System Industries Association Submitter Information Name: Hideaki Chishima Address: Lila Hijirizaka 7FL 3-4-10, Mita Minato-ku, Tokyo, Japan, 1080073 Email: [email protected] Phone: +81-3-6809-5495 Fax: +81-3-3451-1770 Submitter's Representative: Hideki Sanatake Organization: Japan Business Machine and Information System Industries Association General Comment Dear Sir, This post is for Japan Business Machine and Information System Industries Association (JBMIA) to submit its comments in response to solicitation of public comments by USPTO as announced in Federal Register / Docket No. PTO-C-2020-0055. The comments are attached hereto. JBMIA is a Japanese incorporated association which was renamed in 2002 from Japan Business Machine Makers Association established originally in 1960. JBMIA consists of 40 member companies engaged in business machine and information system and 5 supporting companies. Almost all of the member companies have actively filed patent applications in the USA. https://www.fdms.gov/fdms/getcontent?objectId=0900006484967b2a&format=xml&sho... 11/23/2020 Page 2 of 2 Sincerely, Hideaki Chishima (Mr) Intellectual Property Committee Secretariat Attachments JBMIA Comment (finnal) https://www.fdms.gov/fdms/getcontent?objectId=0900006484967b2a&format=xml&sho..
    [Show full text]
  • NEC Electronics and Renesas to Integrate Business Operations Establishment of the World’S Third Largest Semiconductor Company
    NEC Electronics and Renesas to Integrate Business Operations Establishment of the World’s Third Largest Semiconductor Company KAWASAKI, Japan, TOKYO, Japan, April 27, 2009 -- NEC Electronics Corporation (NEC Electronics; TSE: 6723), Renesas Technology Corp. (Renesas), NEC Corporation (NEC; TSE: 6701), Hitachi, Ltd. (Hitachi; TSE: 6501 / NYSE: HIT), and Mitsubishi Electric Corporation (Mitsubishi Electric; TSE: 6503) today agreed to enter into negotiations to integrate business operations at NEC Electronics and Renesas. 1. Background and goals of business integration NEC Electronics was established in 2002, separating from NEC, and Renesas was established in 2003, integrating semiconductor units at Hitachi and Mitsubishi Electric. Both as leading semiconductor companies, NEC Electronics and Renesas provide a wide variety of semiconductor solutions, primarily specializing in microcontroller units (MCUs). In light of fierce global competition in the semiconductor market, NEC Electronics and Renesas have agreed to explore the possibility of business integration in order to further strengthen their business foundations and technological assets while increasing corporate value through enhanced customer satisfaction. By integrating the world’s two largest MCU suppliers (*1), the new company will provide one of the most competitive MCU product lineups throughout the world. NEC Electronics and Renesas both focus on the fast-growing field of system-on-chip (SoCs) products. NEC Electronics is a leading producer of SoCs for digital consumer electronics, while Renesas is a well established manufacturer of SoCs for mobile phones and automotive applications. By reinforcing the companies’ respective strengths and development resources the new company will provide globally competitive SoC products. In terms of the discrete semiconductor business, both companies will define strategies to enhance the competitiveness of analog and discrete products that generate synergies with MCUs.
    [Show full text]
  • Notice of Hearing in Canadian Auto Parts Class Actions- Long
    NOTICE OF HEARING IN CANADIAN AUTO PARTS PRICE-FIXING CLASS ACTIONS If you bought or leased, directly or indirectly, a new or used Automotive Vehicle or certain automotive parts, since January 1998, you should read this notice carefully. It may affect your legal rights. A. WHAT IS A CLASS ACTION? A class action is a lawsuit filed by one person on behalf of a large group of people. B. WHAT ARE THESE CLASS ACTIONS ABOUT? Class actions have been started in Canada claiming that many companies participated in conspiracies to fix the prices of automotive parts sold in Canada and/or sold to manufacturers for installation in Automotive Vehicles1 sold in Canada. This notice is about class actions relating to the following automotive parts (the “Relevant Parts”): Part Description2 Class Period Air Conditioning Air Conditioning Systems are systems that cool the January 1, 2001 to Systems interior environment of an Automotive Vehicle and are December 10, 2019 part of an Automotive Vehicle’s thermal system. An Air Conditioning System may include, to the extent included in the relevant request for quotation, compressors, condensers, HVAC units (blower motors, actuators, flaps, evaporators, heater cores, and filters embedded in a plastic housing), control panels, sensors, and associated hoses and pipes. Air Flow Meters Air Flow Meters, otherwise known as a mass air flow January 1, 2000 to sensors, measure the volume of air flowing into March 20, 2017 combustion engines in Automotive Vehicles, that is, how much air is flowing through a valve or passageway. The Air Flow Meter provides information to the Automotive Vehicle’s electronic control unit in order to ensure that the proper ratio of fuel to air is being injected into the engine.
    [Show full text]
  • OKI Implements Sarnoff's Takecharge On-Chip ESD Protection in High
    Also available on Business Wire 08/26/05 For Immediate Release OKI® Implements Sarnoff’s Takecharge® On-Chip ESD Protection In High-Voltage ICs Design Approach for On-Chip ESD Protection Successfully Implemented in High-Voltage Chips TOKYO, JAPAN / PRINCETON, NJ, USA / GISTEL, BELGIUM (August 26, 2005) – Oki® Electric Industry Co., Ltd. (TSE: 6703, www.oki.com) of Tokyo, Japan, has successfully produced ICs in 0.5um/43V, 0.35um/16.5V, and 0.25um/25V process technologies using TakeCharge® design technology from Sarnoff Europe of Gistel, Belgium. Sarnoff is a diversified technology & services company with a long history of semiconductor innovations. “Under a technology transfer agreement, Oki has licensed silicon-proven TakeCharge devices customized specifically for our high-voltage processes. Our goal is to ensure that we can consistently manufacture chips that perform at high voltages with full electrostatic discharge (ESD) and latch-up protection,” said Mr. Shiratori, Deputy General Manager, Display Driver Division of Oki’s Silicon Solution Company. “We have implemented these TakeCharge devices in our various high volume products, such as LCD and OLED driver devices, where they deliver substantial added value for Oki and its customers.” TakeCharge technology is a design approach to on-chip ESD circuitry. It reduces the size of the I/O section on IC dies, while maintaining or improving on- chip protection against ESD. Implementing robust ESD protection devices is an important part of IC design. “We’re very pleased that an industry leader like Oki has chosen TakeCharge for its new line of high-voltage ICs,” said Koen Verhaege, Managing Director of Sarnoff”s Integrated Circuit Systems & Services business unit and Executive Director of Sarnoff Europe.
    [Show full text]
  • Hitachi Automation Director
    Accelerate resource delivery, reduce risk and maximize performance. Spend more time delivering business value. DATASHEET Hitachi Automation Director Automate Data Center Operations One of the biggest drains on a data center team’s time is the administration of IT infra- structure resources. Provisioning storage, configuring virtual machines (VMs), SAN orchestration and setting up data protec- tion services represent operational tasks that can easily consume up to 45% of IT staff time. These processes are time consuming, and they take IT away from focusing on innovation and delivering value-added business initiatives. Operational tasks can also require many steps that introduce the potential for critical errors. Such errors can Figure 1. Predefined service templates make it easy to “choose and go.” result in applications outages, reduce per- formance and even result in data loss. HAD operations use best practices performance and data path resiliency ensuring that resources are consistently requirements. Automation can help by ensuring resources configured to meet business needs and are quickly and properly configured while ■■ Storage service delivery. Provision service level agreements (SLAs). staff work on the delivery of more complex storage resources with quality of service (QoS) and storage array data protection services. Unlike many of today’s automa- Choose and Go tion software offerings, Hitachi Automation services, to meet recovery and uptime Defining an initial set of automation pol- Director (HAD) supports a broad range of SLAs. icies can take time. To help kick-start tasks and infrastructure resources to accel- ■■ Application-specific automation. the process, Hitachi Vantara includes a erate operational success. Provide resources to applications and broad range of predefined workflows for perform application-specific tasks, like Act Faster, With Less Risk configuring resources (see Figure 1).
    [Show full text]
  • How Hitachi Consulting Simplified Travel Expense Processing
    How Hitachi Consulting Simplified Travel Expense Processing CLIENT Hitachi Consulting Corporation - an industrial digital solutions company, CIIS Solutions Partner SOLUTION Mobile Travel & Expense Automation Solution - Enterprise Edition Case Study Hitachi Consulting uses Oracle E-Business Suite iExpense (“iExpense”) for T&E expense entry and manually controls keeping the business expense receipts organized to prepare an expense report. This process is tedious and time-consuming, considering the multiple sources and formats of the receipt documents - printed paper, vendor portal page, embedded email body and emailed pdf file attachments. The Business Challenge Hitachi Consulting’s cut-off for expense report submission is twice per month. However, employees often struggle with timely expense report submissions, due to the administrative time and effort needed to prepare and submit their expenses for reimbursement. Delays can cause issues for the employees as well as the company. Employee reimbursements can spill over multiple periods. From the company’s perspective this can impede visibility to cash flow, affect proper expense cut-off for financial reporting, and potentially defer invoicing clients for project billable expenses. Manual receipt submission Collecting, compiling and organizing the business expense receipts is a manual process, prone to misplacing and losing receipts. There are many steps required to prepare the receipts for submission: scanning a printed paper receipt, printing to a file a vendor portal receipt, printing to a file an embedded email receipt and saving email attached pdf documents. Finally, combining into a single file or attaching multiple documents to the iExpense expense report. Locating missing receipts or submitting without proper receipt documentation results in delays in submitting for approval or reimbursement.
    [Show full text]
  • PDF Download [1
    Annual Report 2002 TOKYO ELECTRON Profile Established in 1963, Tokyo Electron (TEL) is a world-leading supplier of semiconductor production equipment (SPE) and related services for the semiconductor industry. The Company develops, manufactures and markets a broad lineup of products, including oxidation/diffusion/LP-CVD systems, single wafer CVD and PVD systems, coater/developers, spin-on dielectric (SOD) coaters, etch systems, cleaning systems, wafer probers, and others. Tokyo Electron also uses its accumulated expertise in SPE to develop, manufacture and market coater/developers and etch/ash systems for the manufacture of Flat Panel Display (FPD). Most of the Company’s semiconductor and FPD production systems hold the leading share in their respective markets. Tokyo Electron also maintains a strong presence as a distributor, providing a wide array of semiconductor production systems, storage Disclaimer regarding area network and Internet related products for broadband solutions, and Forward-looking Statements electronic components in Japan from other leading suppliers. With a Matters discussed in this annual report, including network spanning 16 countries on three continents, Tokyo Electron forecasts of future business performance of Tokyo Electron, management strategies, beliefs provides superior products and services to its customers, and superior and other statements are based on the returns to its shareholders. Company’s assumption in light of information that is currently available. These forward-looking statements involve known
    [Show full text]