SPECIFICATION DOCUMENT PROGRAM: THE MIL-SPEC AUTOMOTIVE M1

YEAR: 2020 M1

ESTABLISHED Mil-Spec Automotive creates re-envisioned vehicles that encompass the new era of adventure through 2015 exclusive utility and performance. We offer a distinct aesthetic that sets our work apart from the competition.

Our team focuses on integrating relevant technology and products into a package that improves on proven platforms.

THE 2020 MIL-SPEC M1 1 CHRIS VAN SCYOC ADAM MITCHELL IAN BROEKMAN

President Chief Executive Officer Chief Innovation Officer & Co-Founder & Founder & Co-Founder

THE 2020 MIL-SPEC M1 2 INTRODUCING The Mil-Spec Automotive M1

The MSA M1 is an evolution of the vehicle that our story began with, the . By expanding and improving on the Launch Edition program, we have created a re-imagined vehicle that establishes a new gold standard for current and future programs.

FEATURING:

Three Body Configuration Options

500 HP and 1000 Ft-Lbs Torque

Revised Interior Design Including New Billet Components

THE 2020 MIL-SPEC M1 3 MSA 2020 Components & Features

THE 2020 MIL-SPEC M1 4 Components & Features

AXLES TRANSFER CASE DRIVE TRAIN HORSEPOWER & TORQUE

Independent, 12k rated half shafts Heavy duty, selectable Electronic, selectable 2wd/4wd system with fixed mounted differentials (4L-N-2H-4H push button engagement) *MSA proprietary heavy duty drive train 500hp & 1000 ft-lb configuration includes: re-designed constant velocity front and rear drive shafts, carrier bearings, motor mounts, and *Values based on estimated crank horsepower crossmember. Not equipped with stability or and torque, real world measurements subject to traction control. variation GEAR RATIOS EMISSIONS

1st 3.10 : 1 Diesel oxidation catalyst (DOC) and exhaust gas recirculation (EGR) TURBO DIESEL ENGINE 2nd 1.81 : 1

3rd 1.41 : 1 *Emissions equipment subject to variation Duramax 6.6 L LBZ Turbocharged Diesel V8 (derived), electronically controlled, hand- 4th 1.00 : 1 built and individually tested by HSP Diesel with proprietary programming for 500 HP 5th 0.71 : 1 and 1000 ft-lb of torque STEERING 6th 0.61 : 1 *MSA proprietary features include: individual LOW 2.72:1 HIGH 1:1 Power-assisted engine blueprinting, programming, improved internal components, extreme duty engine cooling configuration

TRANSMISSION

Allison 1000 Series 6-Speed Automatic with adaptive driving technology, protective EXHAUST SYSTEM “limp mode” integration, and internal design improvements MSA proprietary ceramic thermal coated, fully wrapped exhaust insulation, 3.5 inch exhaust system with performance muffler, integrated water fording *MSA proprietary features include: proprietary design, and powder-coated tip. operation system and extreme-duty proprietary transmission cooling system

THE 2020 MIL-SPEC M1 5 Components & Features

FUEL CAPACITY GEARED PORTAL HUBS ELECTRICAL

Proprietary chassis mounted 30 gallon (aluminum) Spur-cut, geared portal hubs, 1.92:1 gear ratio with 12V, 200 amp alternator, dual batteries with selector/ locking spindle nuts isolation switch, stand-alone engine harness, MSA body harness with proprietary quick disconnect, FUEL TYPE Additional ARB hardware found in truck’s toolbox interior & exterior self contained fuse panels

Diesel

FRAME BRAKES

INFLATION CONTROL Fully boxed with five crossmembers Hydroboost power-assisted, four in-board mounted disk brakes, MSA upgraded and proprietary design system. ARB 12V Twin Compressor and quick connect for use with external tire inflation kit and manual tire pressure 20.5 in. diameter, slotted and drilled rotors with single gauge. piston calipers, electronic parking brake

Additional ARB hardware found in truck’s toolbox *Not equipped with ABS *Not equipped with (CTIS) or (TPMS) 20 X 9.5 Aluminum alloy, gun black finish, with beadlock style design

DIFFERENTIALS SUSPENSION Hypoid, 2.56 final drive ratio, 8.875 ring gear diameter, 29 axle spline. Four-wheeled independent double “A” frame, revised TIRES architecture for improved ride quality on and off road Front: AMC Model 20 Zexel Torsen Torque Blasting Differential Nitto Ridge Grappler 38 x 13.50 R20 LT

Front: Heavy duty, open-end coil springs with hydraulic Rear: AMC Model 20 ARB Air Locker RD187 Air Locking shock absorbers Load Speed Index: 128Q Load Range: E Differential

Back: Heavy duty, variable rate, open-end coil springs with *Standard Configuration hydraulic shock absorbers not equipped with spare tire

THE 2020 MIL-SPEC M1 6 MSA 2020 Technical Specifications

THE 2020 MIL-SPEC M1 7 Technical Specifications

IMPERIAL METRIC IMPERIAL METRIC

TOP SPEED Limited 96 mph 154.5 kph PAYLOAD Fully equipped soft top 2,802 lb 1,271 kg

0-60 MPH MAX TOW LOAD 9,300 lb 4,218 kg

ACCELERATION 6.6 sec BRAKING TBA TBA GROUND CLEARANCE 18 in 45.72 cm

RANGE TBA TBA WATER FORDING DEPTH 42 in 106.68 cm

MAX LENGTH 195.5 in 496.57 cm GRADE CAPACITY 60%

MAX HEIGHT 85 in 215.9 cm SIDE-SLOPE CAPABILITY 40%

WIDTH No mirrors/w. mirrors closed-open 86.5 / 93 - 104.5 219.7 / 236.22 - 265.43 BREAK-OVER ANGLE 29°

WHEELBASE 130 in 330 cm APPROACH ANGLE 57°

MAX TRACK WIDTH 94 in 238.76 cm DEPARTURE ANGLE 47°

GROSS AXLE WEIGHT RATING TURNING RADIUS 27.5 ft 8.382 m

FRONT 4,100 lb 1,860 kg REAR 6,800 lb 3,084 kg WHEEL TRAVEL 7 in 17.78 cm

CURB WEIGHT Fully equipped soft top 7,498 lb 1,271 kg

THE 2020 MIL-SPEC M1 8 MSA 2020 Exterior Features

THE 2020 MIL-SPEC M1 9 Exterior Features

Ceramic Underbody & MSA Textured Body 6061 T6 Hardened, Composite Forward Engine Bay Coating Coating Aerospace Grade Tilting Hood With Gas

Insulative Thermal Protection For Cab *Optional Automotive Gloss Paint Finishes Aluminum Body Strut Assisted Operations (Non-Textured) Available (Pkg.5b)

Heavy Duty Rocker Proprietary Door/ Standard Truck Standard OEM Grade Panel Protection Tailgate Protection Configuration with Bed 4 Door Hardtop

Skid Plates Steel Inserts Length: 42 in / Width: 51.5 in / Height: 13.5 in Pickup Configuration

THE 2020 MIL-SPEC M1 10 Exterior Features

Heavy Duty Steel Stainless Steel Grade 8 Or Stainless Heavy Duty Recovery Bumpers Button-Head Fasteners On All Shackles

Front And Rear Fasteners On Exterior Chassis Components Front And Rear Body Components

Exterior Trim Accents Chassis And MSA Signature LED MSA Signature Low Finished In Textured Undercarriage Finished Headlights Profile LED Marker Lights

Black Or Semi Gloss In Semi-Gloss Black Black Bezels, Half Halo DRL’s, High And Low Front: 5 Amber Powder-Coating Powder-Coat Beam Optics Rear: 5 Red

THE 2020 MIL-SPEC M1 11 Exterior Features

Led Turn Signals With Low Profile Intake Functional Hood Vent MSA Badging/Duramax Brake Light Combo Snorkel Diesel Exterior Badging

Front And Rear

Heavy Duty Front Air Mesh Grille Inserts Lift Hooks

THE 2020 MIL-SPEC M1 12 MSA 2020 Interior Features

THE 2020 MIL-SPEC M1 13 Interior Features

Cabin Dashboard Audio HVAC

MSA Design Works Gauge Package; Acoustic Deadening Cab Treatment Coating Anodized Black Bezels, Imperial Jl Audio 9 Speaker Premium Sound High-Output Primary And Secondary Measurements System Featuring: HVAC System (Fore And Aft) Featuring: Water Resistant Flooring, Multi-Layer, *Available Metric Measurements For Four 5.25. C5 Woofers With Crossover Machined, Fully Adjustable Billet Thermo-Acoustic Barrier Export Markets Networks Aluminum Vents (Fore And Aft) MSA Design Works Interior, Proprietary Four Vents On Dashboard, Two Vents On Four .75 in. C5 Silk Dome Tweets With Design And Layout Unique To MSA, Spare Industries (CNC Made) Steering Rear Center Console Crossover Network Integration Manufactured From Aerospace Grade Wheel With MSA Branding, Handmade/ Aluminum Upholstered One 10 in. 400 Watt Shallow Depth Sub Driver And Passenger Door Window Woofer Water-Resistant Upholstery, Marine Machined MSA Branding Throughout Defrost Ventilation Grade Materials, Hand-Stitched Surfaces Interior Throughout Interior 700 Watt, 5 Channel Marine Grade Floor Ventilation Amplifier Knurled, Billet Aluminum Door Lock Pulls Finished In Black Powder-Coat

Stainless Steel, Black Anodized, Phillips Head Fasteners Used Throughout Interior

THE 2020 MIL-SPEC M1 14 Interior Features

Heated Windshield Interior Storage Areas Power Locking System Formawerx (CNC Made) With Controls And Auto Timer Overhead Front Storage, Locking Rear With Remote And Keyless Entry MSA Design Works Storage Box, Center Console Storage Trays, 4 Stainless Steel Cupholders Custom Key

Power Adjusting Windows Rear View Mirror With Led Dome Lighting Re-Purposed Interior & Mirrors Integrated Reverse Automatic With Manual On/Off Override Grab Handles

Camera *Vehicle Not Equipped With Airbags

THE 2020 MIL-SPEC M1 15 Control Systems

Forward Center Console Overhead Center Console Driver-Specific Controls Aft Occupant Controls

Billet Aluminum Accessory Switch Bank- Central Driver Controls For Windows Speedometer Menu With Gps JL Audio Rear Passenger Control Unit Rocker Style, 2 Position (On/Off) And Doors Connectivity Featuring: Automatic Clock, Altitude Reading, Digital Speed, With Source, Volume, Mute, Pause/Play, And Left To Right: Head-Lights, Light Bar, Interior And Performance Apps Track Selection Functions Lighting, Heated Windshield, Accessory, Trans Fan, ARB Air Locker, Diff Lock) For Recording Top Speed, 0-60 mph Times, And 1/4 Mile Times Side Mirror Adjustment Switch Aerospace Grade Sun Visors 12 V Cigarette Lighter Electronic Transfer Case Module

E-Stop (Electronic Parking Brake)

Traditional Keyed Ignition

JL Audio Marine Grade Head Unit

With Bluetooth/USB/AUX Connectivity, Sirius Satellite Radio, AM/FM Radio, And Audio Tuning Capability

THE 2020 MIL-SPEC M1 16 MSA 2020 Color & Materials

THE 2020 MIL-SPEC M1 17 Color & Materials

EXTERIOR COLOR

Deep Sky Black After-Burner Grey Moon-Light Grey Denim Blue Huntsman Green Olive Green Desert Tan Fire Red

INTERIOR MATERIALS TRIM

Billet Aluminum- Billet Aluminum- $850 Metal Finish Black Finish

Black Leather Black Leather $1000 Saddle Leather $2500 & Grey Canvas & Black Leather & Black Leather

MSA DESIGN WORKS PAINT PACKAGE $11,000 MSA DESIGN WORKS INTERIOR PACKAGE $22,000

Interested in personalizing your truck beyond the standard exterior The beauty of a hand-built vehicle is the opportunity for customization. colors/coating? Selecting this option allows you to work with MSA’s team Selecting this option allows you to work with MSA’s design team to to develop a custom color and finish that fits your vision. develop your truck’s interior with endless possibilities.

THE 2020 MIL-SPEC M1 18 Contact Us

PHONE ADDRESS

(248) 430 5150 102 Pierce Street Birmingham, Michigan 48009 EMAIL USA [email protected]

Mil-Spec Automotive is an independently owned and operate business not affiliated with AM General Photography: Stephan Bauer Prestige Imports or General Motors Corporation. Any products mentioned are the trademarks of their respective Ian Broekman Drew Phillips holders. Any mention of trademarked names or other makers is for the purpose of reference only. Zac Broder Alex Tillman

HUMMER and H1 are registered trademarks of General Motors Corporation. Design: Jenny Rudziensky