Comminution Effects on Mineral Grade Distribution

Total Page：16

File Type：pdf, Size：1020Kb

Comminution Effects on Mineral Grade Distribution

EGU2020-8624 https://doi.org/10.5194/egusphere-egu2020-8624 EGU General Assembly 2020 © Author(s) 2021. This work is distributed under the Creative Commons Attribution 4.0 License. Comminution effects on mineral grade distribution Gabriele Baldassarre and Oliviero Baietto Politecnico di Torino, DIATI, Italy ([email protected]) Every mining operations is followed by a beneficiation process aimed to deliver quality material to the transformation industry. Mainly, in mineral processing comminution and grinding of extracted ore, are crucial operations for the following separation steps in order to obtain valuable minerals from gangue. Comminution is the most energy consuming phase and the quality of the results is strictly related to the characteristic of the material under treatment. A preliminary study has been performed in order to understand the crushing behaviour of a mixed sulphide ore, containing galena and sphalerite, and the distribution of the two target minerals among the different sized products of the process. Ore samples have been examined and characterized by means of thin sections observation and SEM analyses for the determination of the free grain size, while XRD quantitative analyses have been performed for the definition of the grades. The selected crushing circuit comprises lab-scale impact crusher, jaw crusher, disk mill and rod mill. For each stage of the process products below the free grain size threshold have been collected and particle size analyses have been carried out. Comminution products were divided in dimensional classes suitable for flotation separation, ranging between 0.250 and 0.075mm and XRD analyses showed a variable mineral grade distribution varying with the reduction in dimension of the products. This important trend should be considered for further investigation related to an efficient froth flotation separation. Powered by TCPDF (www.tcpdf.org).

Copy Link

Recommended publications

Chapter 11: Beneficiation
CHAPTER 11 Beneficiation – Comminution Sponsored by: SPONSOR PROFILE Through pioneering the introduction of modern process • project controls and reporting plants and associated technologies to remote and logistically • contract management challenging locations, Lycopodium Minerals Pty Ltd has • procurement and logistics management developed a successful track record in developing and • inspection and expediting commissioning major resource projects worldwide. • quality assurance/quality control Since its establishment in 1992, Lycopodium has become a • financial evaluations leading international engineering and project management • client representation. consultancy, with an enviable reputation for providing Engineering technically innovative and cost-effective engineering solutions. They are focused on the evaluation and development of projects • Conceptual through to detailed design in the fields of minerals processing, materials handling and • across all disciplines: earthworks, civil infrastructure. • structural, mechanical, piping • electrical, instrumentation, control Lycopodium Minerals has undertaken studies and projects across a broad range of commodities including gold (free, • systems, automation and infrastructure. gravity, refractory, preg robbing), base metals (concentrators, Process hydrometallurgy), iron ore, uranium, rare earths and industrial minerals. Their resume of projects reflects diversity in not • Metallurgical test work design only commodity, but client background, technology, scale of • management and interpretation
[Show full text]
Challenges Related to the Processing of Fines in the Recovery of Platinum Group Minerals (Pgms)
minerals Review Challenges Related to the Processing of Fines in the Recovery of Platinum Group Minerals (PGMs) Kirsten C. Corin 1,* , Belinda J. McFadzean 1, Natalie J. Shackleton 2 and Cyril T. O’Connor 1 1 Centre for Minerals Research, Chemical Engineering Department, University of Cape Town, P Bag X3, Rondebosch, Cape Town 7700, South Africa; [email protected] (B.J.M.); [email protected] (C.T.O.) 2 Minerals Expertise Tech Pty Ltd., Germiston 2007, South Africa; [email protected] * Correspondence: [email protected] Abstract: In order to increase the recovery of PGMs by flotation, it is necessary to optimise the liberation of the key minerals in which the platinum group elements (PGEs) are contained which include sulphides, arsenides, tellurides, and ferroalloys among others, while at the same time ensuring the optimal depression of gangue minerals. In order to achieve this, comminution circuits usually consist of two or three stages of milling, in which the first stage is autogeneous, followed by ball milling. Further liberation is achieved in subsequent stages using ultra-fine grinding. Each comminution stage is followed by flotation in the so-called MF2 or MF3 circuits. While this staged process increases overall recoveries, overgrinding may occur, hence creating problems associated with fine particle flotation. This paper presents an overview of the mineralogy of most of the more significant PGM ores processed in South Africa and the various technologies used in comminution circuits. The paper then summarises the methodology used in flotation circuits to optimise recovery Citation: Corin, K.C.; McFadzean, of fine particles in terms of the collectors, depressants, and frothers used.
[Show full text]
Effect of Comminution Method on Particle Damage and Breakage Energy
EFFECT OF COMMINUTION METHOD ON PARTICLE DAMAGE AND BREAKAGE ENERGY Michael Moats, Jan Miller, Chen-Lun Lin and Raj Rajamani Department of Metallurgical Engineering University of Utah Outline • Our Department • High Pressure Grinding • Particle Damage Characterization • Breakage Energy • Application to Simulant Development Department of Metallurgical Engineering • University of Utah is located in Salt Lake City along the Wasatch Mtns. • Only stand alone Metallurgical Engineering department remaining in the U.S. • Traditional curriculum with critical mass of professors – Mineral Processing – Chemical Metallurgy – Physical Metallurgy High Pressure Grinding Rolls (HPGR) HPGR consists of a pair of counter rotating rolls, one fixed and the other floating. The feed is introduced to the gap in between the rolls and they compress the bed of particles. The grinding force applied to the crushing zone is controlled by a hydro-pneumatic spring on the floating roll. Speeds of the rolls are also adjustable to obtain optimum grinding conditions. Comparison of HPGR and AG/SAG Mills Aspect HPGR AG/SAG Mill Grinding Mechanism Inter-particle compression Impact, attrition and compression Residence Time Low-single pass High (feed migrates through length of mill) Wet/Dry Grinding Dry-Low moisture Predominantly wet milling Availability >90% -2-4 change outs pa >90% -1-2 change outs pa Size regulated feed Required Yes-strongly affects stud breakage AG-No, SAG-Sometimes Critical material size Not required Required Product particle Yes (beneficial for downstream Negligible micro-cracking processes Maximum Throughput 2000tph 4000tph Footprint Small Large Specific power 1-5kWh/t 5-12kWh/t Operating cost Overall plant 20% lower Overall plant 20% higher Capital Cost 25% lower 25% higher Delivery time Substantially faster Substantially longer Variation in feed hardness Single parameter variable High losses •Reference: Koenig, R.L.
[Show full text]
Comminution of Copper Ores with the Use of a High-Pressure Water Jet
energies Article Comminution of Copper Ores with the Use of a High-Pressure Water Jet Przemyslaw J. Borkowski Faculty of Geo Engineering Mining and Geology, Wroclaw University of Technology, 50-370 Wroclaw, Poland; [email protected] Received: 4 November 2020; Accepted: 27 November 2020; Published: 28 November 2020 Abstract: The article presents research on the comminution of copper ore in a self-constructed mill using high-pressure water jet energy to investigate the usefulness of such a method for comminuting copper ore. As a result, ore particles are obtained that are characterized by appropriate comminution and a significant increase in their specific surface, in turn allowing for potential further processing of the mineral. A comparative analysis of the efficiency of copper ore comminution, primarily taking into account the unit energy consumption and the efficiency of the milling process, clearly indicates that the energy absorption of hydro-jet material comminuting is lower than during mechanical grinding, e.g., in a planetary ball mill. The applicability of the technique depends on the brittle nature of the host rock, e.g., it is especially appropriate for sandstone and shale ores. Keywords: copper ore comminution; hydro-jet mill; high-pressure water jet 1. Introduction Shredding processes are widely used in various fields of raw material processing. Such procedures are carried out in order to lower the costs of maintaining the cutter discs used in Tunnel Boring Machines (TBM) operating in hard rock formations [1]. They are also used to obtain fine-grained particles, sometimes even nanoparticles [2] or those that have an increased specific surface, which can be especially useful in pharmaceuticals [3].
[Show full text]
Xstrata Technology Update Edition 13 – April 2012 Building Plants That Work
xstrata technology update Edition 13 – April 2012 Building plants that work You have to get a lot of things it takes another operator to get them right to build a plant that works. right. Someone who has lived through the problems, had to do the maintenance, operated during a midnight power Of course the big picture must be right – doing the right project, in the right place, failure, cleaned up the spill. Someone at the right time. who has “closed the loop” on previous designs; lived with previous decisions After that, the devil is in the detail. You and improved them, over and over. need a sound design, good execution, good commissioning, and ongoing This is why Xstrata Technology provides support after commissioning. You need a technology “package”. Just as a car to operate and maintain your plant in is more than an engine, technology is the long run, long after the construction more than a single piece of equipment. company has left. That’s when all the Technology is a system. All the elements “little” details become important – how of the system have to work with each easy is it to operate, how good is the other and with the people in the plant. maintenance access, what happens in We want our cars designed by people a power failure, where are the spillage who love cars and driving. So should points and how do we clean them our plants be designed by people with up? Are the instruments reliable and experience and passion to make each is the process control strategy robust one work better than the last.
[Show full text]
Improving Energy Efficiency Across Mineral Processing and Smelting Operations – a New Approach
Improving Energy Efficiency Across Mineral Processing and Smelting Operations – A New Approach C L Evans1, B L Coulter2, E Wightman3 and A S Burrows4 ABSTRACT now reporting their performance in this area using a range of sustainability indicators. Among these, energy use and its impact With their commitment to sustainable development in an increasingly carbon-constrained world, many resources companies are focused on on climate change are priorities, with many company reducing the energy required to create their final products. In particular, sustainability reports including total energy use and associated the comminution and smelting of metal-bearing ores are both highly greenhouse gas (GHG) emissions in both absolute and relative energy-intensive processes. If resource companies can optimise the terms (ie normalised to a per unit product) among their key energy efficiency across these two processing stages, they can directly environmental sustainability indicators. Companies are setting reduce their overall energy consumption per unit mass of metal produced targets to achieve improvements in these indicators, but at the and thus reduce their greenhouse gas footprint. same time there is a global trend to more complex and lower Traditional grinding and flotation models seek to improve the grade orebodies which are more energy-intensive to process. As efficiency of mineral processing, but they do not consider the energy used a result, resource companies are having to become more by downstream metal production, eg smelting and refining. Concentrators innovative to improve the environmental sustainability and the and smelters individually may be running efficiently, but are they optimising energy consumption of the overall system? A key step towards efficiency of their operations.
[Show full text]
Thermodynamic Efficiency of a Copper Comminution Process
PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE ESCUELA DE INGENIERIA THERMODYNAMIC EFFICIENCY OF A COPPER COMMINUTION PROCESS WILHELM ALEXANDER JACOB RODRÍGUEZ Thesis submitted to the Office of Research and Graduate Studies in partial fulfillment of the requirements for the Degree of Master of Science in Engineering Advisor: PHD. JORGE RAMOS GREZ Santiago de Chile, August, 2016 MMXVI año, Wilhelm Alexander Jacob Rodríguez PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE ESCUELA DE INGENIERIA THERMODYNAMIC EFFICIENCY OF A COPPER COMMINUTION PROCESS WILHELM ALEXANDER JACOB RODRIGUEZ Members of the Committee: PHD. JORGE RAMOS GREZ PHD. WOLFRAM JAHN PHD .TIMOTHY GUTOWSKI PHD. ANGEL ABUSLEME Thesis submitted to the Office of Research and Graduate Studies in partial fulfillment of the requirements for the Degree of Master of Science in Engineering Santiago de Chile, August 2016 To my parents, siblings and girlfriend whom all, in their own way, showed their support during the development of this work. To Professor Ramos whom presented this great opportunity and guided throughout its study. To Dan and Tim who patiently coached and helped during this study. ii ACKNOWLEDGEMENTS To God almighty whom I owe everything I am, his blessing for having a privileged education and health, loving family and girlfriend and good friends. May he forever guide my path and that this work be of contribution for others, for their wellbeing and his glory. To my parents, whom I owe my whole lifetime education, love and support. To my father who gave me practical counsel, to my mother who gave me all the help she could give me. To my siblings whom, in their own way, helped and supported me during this project.
[Show full text]
Weir: See Things Differently
WEIR: SEE THINGS DIFFERENTLY. The Weir Group PLC Annual Report and Financial Statements 2020 CONTENTS FINANCIAL & NON-FINANCIAL SUMMARY Strategic Report ORDERS2 1 Our Business at a Glance 2 £1.9bn 2.9 2.9 Our ‘We are Weir’ Strategic Framework 4 -13% Chairman’s Statement 6 2.3 2.2 150 years of Weir 8 1.9 2.1 Chief Executive’s Strategic Review 10 1.9 Our 2020 Key Performance Indicators 14 Total Group Discontinued Operations Iron Bridge Aftermarket Contract 16 Continuing Operations Our Markets 18 Our Business Model 20 2016 2017 2018 2019 2020 The Global Pandemic 22 Stakeholder Engagement 24 REVENUE Safety in Mining 26 1 Financial Review 28 £2bn 2.8 2.8 Sustainable Society 32 -4% 2.3 2.3 Operational Review 34 1.9 2.0 2.0 Risk Management 39 Principal Risks and Uncertainties 43 Total Group Our Sustainability Review 52 Discontinued Operations Continuing Operations Non-financial Reporting 64 2016 2017 2018 2019 2020 Corporate Governance Introduction from the Chairman 70 ADJUSTED PROFIT BEFORE TAX3 TOTAL STATUTORY LOSS AFTER TAX Governance at a Glance 72 1 Board of Directors 74 £255m (£149m) Group Executive 78 -5% +61% 333 299 Board Statements 79 232 247 Division of Responsibilities 80 269 255 Total Group 171 Board Meetings 81 Discontinued Operations Board Activities and Governance in Action 82 (£23m loss in 2020) Governance in Action - Meet the Board Session 83 Continuing Operations Shareholder Engagement 84 2016 2017 2018 2019 2020 Boardroom Practice 85 Board Effectiveness 86 TOTAL INCIDENT RATE4 Accountability 88 Viability Statement 89 0.37
[Show full text]
Early Rejection of Gangue – How Much Energy Will It Cost to Save Energy?
Early rejection of gangue – How much energy will it cost to save energy? Grant Ballantyne 1,2 , Marko Hilden 1,2 and Malcolm Powell 1,2 1The University of Queensland, JKMRC-SMI 2Co-Operative Research Centre for Optimising Resource Extraction (CRC ORE) Contact: [email protected] ABSTRACT Comminution accounts for approximately 30 to 40% of the energy consumed on an average mine site (DOE, 2007) and somewhere from 4 to 9% of Australia’s total energy consumption (Tromans, 2008). Additionally, if one includes the energy embodied in steel grinding consumables, this may increase comminution energy by more than 50% (Musa and Morrison, 2009). Energy savings of up to 50% are theoretically possible by employing novel circuit designs and using smart separation techniques, which reject coarse liberated gangue. A range of different strategies such as selective mining, screening, ore sorting, coarse flotation and dielectrophoresis can be used to reject the coarse liberated gangue at different particle sizes. These technological advances have the potential to increase the throughput in the comminution circuit, while decreasing the energy consumed per tonne or ounce of metal produced. This paper investigates the energy consumed through sorting, and the optimum position of these technologies in the flow sheet, in terms of energy, cost and risk. The findings form the basis of a methodology that can identify the potential upgrades/changes required to obtain a positive return from these sorting and coarse separation techniques. Reference as: Ballantyne, G.R., Hilden, M., Powell, M.S., 2012. Early rejection of gangue – How much energy will it cost to save energy?, In Comminution '12, ed.
[Show full text]
A Study of a Carbonaceous Gold Ore James S
Montana Tech Library Digital Commons @ Montana Tech Bachelors Theses and Reports, 1928 - 1970 Student Scholarship 1941 A Study of a Carbonaceous Gold Ore James S. Huckaba Follow this and additional works at: http://digitalcommons.mtech.edu/bach_theses Part of the Ceramic Materials Commons, Environmental Engineering Commons, Geology Commons, Geophysics and Seismology Commons, Metallurgy Commons, Other Engineering Commons, and the Other Materials Science and Engineering Commons Recommended Citation Huckaba, James S., "A Study of a Carbonaceous Gold Ore" (1941). Bachelors Theses and Reports, 1928 - 1970. 147. http://digitalcommons.mtech.edu/bach_theses/147 This Bachelors Thesis is brought to you for free and open access by the Student Scholarship at Digital Commons @ Montana Tech. It has been accepted for inclusion in Bachelors Theses and Reports, 1928 - 1970 by an authorized administrator of Digital Commons @ Montana Tech. For more information, please contact [email protected]. ! -.. '_ _. r' ...: ,.... ,/'" f • . A STUJ.)Y C.u.RBON.u.CiiOUS GOLD By James S. Huckaba A Thesis ubmitted to the Departmen~ of etallurgy in }artial Fulf11~ent of the Requirouents fer the Degree of 2cchelor of ~cience in Jetallurgical ~n0ineering MONTAI~ SCI! OL OF r.mreB LIBRARY BUTTE " A S'J]UDY OF CARB ADEOUS GOLD ORE By ~mnes S. Huckaba I -4 D 70 s: Thesis Submi tted to the Dep artment of etallurgy in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in ~etallurgical Engineering MONTANA SCHOOL OF MINES LIBRARY, I - TABLE OF CONrENI'S
[Show full text]
Copper Worldwide Vol 7 No 1 Jan-Feb 2017
JANUARY/FEBRUARY 2017 VOLUME 7 | 1 See Buyers Guide pp26-27 n Key Words: Innovation and sustainability n News: Głogów Smelter Kamoa-Kakula More copper mined Project issues n Smelting features: Converting (2 of 3) Two-step method at Dongying n Spotlight: Electrorefining progress UMMC n Optimisation: A 4-step process n Copper in Germany: Jonathan Barnes on Europe’s copper major n Copper semis: Producers and capacity survey n Events: 30th Intl Copper 16th World Copper Conference Copper/Cobre 2016 Coming up in 2017 n Contracts: Outotec re-orders Toquepala Steerhorn Chuquicamata n Buyers Guide - In search of added value ISSN 2046-9438 www.copperworldwide.com www.copperworldwide.com CONTENTS | 1 We transform … Key Words the world of copper 3 Innovation and sustainability News Kamoa-Kakula progress; Rise in mined 4 copper; Głogów starts up flash furnace; Project acceptance study; IWCC Technical Seminars; MIDAS undersea research results; The MD issue around commissioning; MKM into e-mobility; Market in surplus; Aurubis update; Glencore knowhow; Peru output Spotlight Electrometallurgy 2016 review; 6 UMMC tankhouse Contracts & People Outotec re-ordering and Toquepala 20 contract; Steerhorn cathodes; Gas management in France; Iran and Indonesia The Głogów Copper Smelter (see page 5) items; Chuquicamata acid plants ordered; Copper crucible restoration Inside this issue ELECTROREFINING/ 16TH WORLD ELECTROWINNING COPPER CONFERENCE The SX-EW cost burden; G Corner top Preview and latest CRU analysis 9 in refining; Dias d’Ávila milestone; 19 Ion exchange processing SAFETY AND Copper working process – from the melting bath to the ﬁ nal product PLANT INTEGRATION MAINTENANCE AND CONTROL Stories relating to these SMS group has been active in the copper ﬁ eld for more Our integrated solutions are a byword for robust and reli- Optimisation of control systems via the two key operational areas than 50 years.
[Show full text]
Energy Efficient Comminution Circuits – a Modified Grinding Strategy and the Selection of a Target Product Size
Energy Efficient Comminution Circuits – A modified grinding strategy and the selection of a target product size Z. Pokrajcic University of Queensland, JKMRC, QLD Introduction increasing need for more efficient grinding This paper describes two techniques that can be systems and innovative comminution technologies used in the design of comminution circuits for that not only increase the efficiency of the improved efficiency and a reduction in total comminution process but also act to minimise the energy consumption. They are: consumption of steel media and liners. This together with a new approach to choosing a target • A modified grinding strategy where efficient product size can significantly increase the energy grinding equipment is used and techniques efficiency of a comminution circuit. employed to decrease grinding media consumption Methodology / Experimental Technique • A more reasoned and thorough approach to The two parts of this investigation were the selection of target product size for a undertaken according to the following: comminution circuit involving a better A modified grinding strategy understanding and interpretation mineral liberation data. All of the modifications made to the configuration of an existing comminution circuit were Background undertaken using the modelling and simulation There has been much discussion about the energy package JKSimMet. It is a valuable tool in intensive nature of comminution processes. It has predicting the performance of a comminution been quoted several times that comminution circuit, including the equipment power draw, processes account for 3%-4% of the global product size distributions, classification electrical energy consumption. However, the efficiency, etc. comminution process remains inherently The aim of the eco-efficient modifications was to: inefficient.
[Show full text]