DOCSLIB.ORG

Uab Verada –Delivering Project Solutions and Resources to the Shipbuilding and Construction Industries

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Uab Verada –Delivering Project Solutions and Resources to the Shipbuilding and Construction Industries UAB VERADA –DELIVERING PROJECT SOLUTIONS AND RESOURCES TO THE SHIPBUILDING AND CONSTRUCTION INDUSTRIES • Shipbuilding, Ship repair & conversion • Marine and Offshore services • Industrial sector • Construction • Workforce Shipbuilding and ship repair services for all type vessels. • Metal works • Assembly of ship sections / Blocks / Grand-bocks • Outfitting • Different types of welding (GTAW, TIG, MIG, MAG, Stick welding) • Sandblasting/ Painting/ Anticorrosive coating/ Metallisation • Pipeline works • HVAC / Insulation / • Interior works JSC Verada carries out ship repair and modernization of ships and yachts anywhere in the world. Our highly qualified repair teams can arrive to any shipyard or port, or join the vessel crew during the voyage in order to perform repair works. We are is always ready to offer its clients the most effective and convenient way and place in order to carry out modernization or repair. All our services are providing in accordance with the requirements of Lloyd’s Register, Bureau Veritas, DNV and etc. Marine and Offshore services Solutions to the Oil and Gas/ Marine / Renewable energy / Wind farm industries. • Major metal work • Plating • Hull outfitting • Welding works (TIG, MIG, MAG, manual welding and ect.) • Outfitting / HVAC / Insulation • Interior fitting • Pipeline work Pipelines, Piping and HVAC Design, manufacture and install pipes. • Production of pipes • Production of pipe systems and pipe lines • Ship piping systems manufacture and repair • Hydraulic system repair • Pipeline installation • HVAC System • Installation of Marine and Offshore ventilation and air conditioning All services are available as sub-contract and in a “man power” Supply form. ELECTRICAL INSTALLATION/ MAINTENANSE/ SERVICE - All types job of Low voltage electrical works (upgrade wiring of any type, new construction wiring, remodeling and additions); - Lightning protection devices; - Installation of LAN and CCTV systems; - Installation of Fire and Security systems; - Installation of lighting; - Installation of Back-up power systems; - Ventilation and Air Conditioning. Ship Electrical works: New constructions, remodeling, repairs (flooded, burnt, etc.). Cable pulling, connection of power boards, panel boards, control panels and transformers, wiring inside cabinets. Mounting and connecting fire system, PA system, BNWAS, radio and navigation equipment, etc. SERVICE • - Measurement and testing of electrical networks; • - Maintenance of electrical equipment; • - Maintenance high and low voltage electrical systems; • - Participation in preventive and maintenance works of electrical equipment; • - Implementation of the installation and other works by reconstruction and the introduction of new electrical equipment; • - Preparation of instruments and apparatus for enabling and commissioning and connection of electrical equipment; • - Measurement insulation resistance; • - Wiring repair and troubleshooting; • - Energy audit - reducing costs energy resources, increasing efficiency. Workforce We are proud to offer highly skilled and experienced personals for onshore / offshore and civil projects. • Welders (GTAW, TIG, MIG, Stick welding) • Pipe welders (GTAW, TIG, MIG, Stick welding) • Insulation workers • Interior outfitters • Painters • Pipe fitters • Steel fitters • Electricians • Supervisors References: 1. Arctech Helsinki Shipyard OY (Finland) – welding, steel-fitting works, electrical installation/ shipbuilding sector; 2. Bätbygg AS (Norway) – electrical installation, welding, steel-fitting works, pipe-fitting / ship building sector; 3. Fitjar Mekaniske Verksted AS (Norway) – welding, steel-fitting works / shipbuilding sector ; 4. BG Fosen/ Noryards AS (Norway) - steel fitting, welding works, electrical Installation / ship building sector ; 5. G & G Internatioration (Finland) – welding works (with specific thickness of manufactured steel) /offshore sector ; 6. Global Energy Group (Holdings) Ltd. (Scotland) – welding, steel-fitting works / ship building offshore industry ; 7. Harland and Wolff Heavy Industries Ltd. (Belfast, Ireland) - welding, steel-fitting works / onshore / offshore sector ; 8. Loksa Shipyard Ltd. (Estonia) – welding, steel-fitting, painting works / ship building & repairing sector ; 9. Neptun Werft GmbH (Germany) – electrical Installation, welding, steel fitting, insulating works / shipbuilding sector; 10. Riga shipyard (Latvia) - welding, steel-fitting, painting works / ship building & repairing sector; 11. Rautaruukki Corpoyövene OY (Uusikaupunki, Finland) – welding, steel-fitting, painting works / shipbuilding, repairing yard ; 12. Uudenkaupungin Tnal NV (Belgium) – welding works / ship building sector ; 13. Rauma Marine Constructions (Finland) – electrical installation/ shipbuilding sector; 14. Victor Buyck Steel Construction NV (Belgium) - welding, steel-fitting works / bridge construction sector. 15. Scanel International A/S (Denmark) – electrical installation/ offshore sector. Naujojo Sodo g. 1A, Klaipėda 92118, Lithuania Phone: +370 622 20125 +370 675 46613 E-mail: [email protected] Web: www.verada.eu.
Load more

Recommended publications
  • Read Arctic Passion News
    Aker Arctic Technology Inc Newsletter September 2014 Arctic PassionNews 2 / 2014 / 8 LNG First Arctic LNG is a Icebreaking Module Carrier clean option trimaran family page 4 page 12 grows page 7 New methods for measuring ice ridges page 16 Ice Simulator reduces risks page 8 Arctic Passion News No 8 September 2014 In this issue Page 2 From the Managing Director From the Managing Director Page 3 Design agreement for Aker ARC 121 Page 4 First Arctic module carrier The year 2014 has been interesting and Page 7 Trimaran icebreaker challenging in many ways. The recent family grows changes in the political atmosphere have also affected the business environment. Page 8 Ice simulator reduces risks Specifically, this also concerns the oil Page 10 New era in Antarctic vessels industry, which is one of the main drivers Page 12 LNG machinery is for the recent icebreaker projects and for a clean option arctic development in general. Page 15 Optimised friction However, we all must hope the situation saves money will not escalate and both developers Page 16 New methods for measuring and operators can continue to work in sustainable way in the arctic develop- ice ridges ment projects. Page 17 9th Arctic Passion Seminar We at Aker Arctic have been very active Page 18 What's up in the projects with our clients. The Page 20 Training programme development of the first-ever arctic class graduation heavy cargo carrier has been a very Coming events interesting project technically. With the shipowner, we have developed a vessel for high arctic requirements and created Announcements interesting technical solutions, all within My first eight months as the managing a very tight time schedule.
    [Show full text]
  • Ship Emissions and Technical Emission Reduction Potential in the Northern Baltic Sea
    SHIP EMISSIONS ANDTECHNICAL EMISSION RED REPORTS OF FINNISH ENVIRONMENT institUte 8 | 2006 Ship emissions and technical emission reduction potential in the Northern Baltic Sea Johanna Wahlström, Niko Karvosenoja and Petri Porvari U CTION POTENTIAL INTHE NORTHERN BALTIC SEA FINNISH ENVIRONMENT INSTIT ISBN 952-11-2276-5 (nid.) ISBN 952-11-2277-3 (PDF) ISSN 1796-1718 (pain.) U TE ISSN 1796-1726 (verkkoj.) Finnish Environment Institute REPORTS OF FINNISH ENVIRONMENT INSTITUTE 8 | 2006 Ship emissions and technical emission reduction potential in the Northern Baltic Sea Johanna Wahlström, Niko Karvosenoja and Petri Porvari Helsinki 2006 Finnish Environment Institute REPORTS OF FINNISH ENVIRONMENT INSTITUTE 8 | 2006 Finnish Environment Institute Research Programme for Global Change Page layout: Ritva Koskinen Cover photo: Mikko Nurmi The publication is alvo available in the Internet: www.environment.fi/publications Edita Prima Ldt, Helsinki 2006 ISBN 952-11-2276-5 (nid.) tai (sid.) ISBN 952-11-2277-3 (PDF) ISSN 1796-1718 (pain.) ISSN 1796-1726 (verkkoj.) FOREWORD This study was carried out in the Finnish Environment Institute at the Research Programme for Global Change (GTO) during years 2005 and 2006. The focus was, firstly, to develop national integrated assessment modeling framework of air pollutants, and secondly, to enhance the general understanding of the magnitude of ship emissions and reduction potentials in the sea areas near Finland. The work was funded by the Ministry of the Environment and the KOPRA project in the technological programme ”FINE Particles - Technology, Environment and Health 2002-2005” of the National Technology Agency of Finland (Tekes). The authors gratefully acknowledge the financial support.
    [Show full text]
  • Rautaruukki Corporation Annual Report 2010
    Rauta ruukki Corporation Annual Report 2010 www.ruukki.com Rauta ruukki’s Annual Report 2010 marks a new chapter in reporting at Ruukki. The principal channel for investor communication and reporting is www.ruukki.com. Alongside this compact printed version of our annual report, we are also publishing an online version in the form of a compact review of 2010, with links to take you to more information on our website. You can download the main sections of the annual report in the form of pdf and excel documents from the Annual Report download centre. The Corporate Responsibility Report for 2010 is also published on the company’s website at www.ruukki.com. Business review Financial statements 2010 1 Ruukki in brief 25 Report of the Board of Directors 2 Year 2010 37 Consolidated financial statements 4 Strategy 41 Notes to the consolidated financial 6 CEO’s review statements 91 Financial indicators Governance 93 Parent company’s financial statements 8 Rauta ruukki Corporation’s Corporate 97 Board of Directors’ proposal for the Governance Statement 2010 disposal of distributable funds 16 Board of Directors 98 Auditors’ report 18 Corporate Executive Board 99 Figures by quarter 20 Risk management 100 Information for shareholders Ruukki in brief Ruukki supplies metal-based components, systems and integrated systems to the construction and engineering industries. The company has a wide selection of metal products and services. Our presence Our business areas Operations in nearly 30 countries. Strong position in the Nordic countries and Construction Eastern Europe. We provide efficient, time-saving steel structure solu- tions for commercial, office and industrial construc- tion, single-family homes, port and transport infra- Ruukki’s focus areas structure construction and for wind turbines.
    [Show full text]
  • Ruukki Is a Multi-Skilled Actor Ruukki As a Company in the Steel and Engineering 1 Rautaruukki in Brief 2 CEO’S Review Industries
    Contents Ruukki is a multi-skilled actor Ruukki as a company in the steel and engineering 1 Rautaruukki in brief 2 CEO’s review industries. 4 2008 in brief 6 Business environment 8 Strategy 16 Delivering on the strategy The company’s vision is to be 24 Ruukki Construction the most desired solutions 26 Ruukki Engineering 28 Ruukki Metals supplier to construction 30 Units by country 32 Stock exchange releases 2008 and engineering industry 36 Research and development customers. Responsible Ruukki 38 Corporate responsibility More 40 Financial responsibility 44 Social responsibility 50 Environmental responsibility with Governance 60 Corporate governance 66 Board of Directors 68 Corporate Management Board metals 70 Risk management Financial statements 2008 76 Report of the Board of Directors RautaruukkiRautaruukki CorpCorporationo Annual Report 2008 82 Consolidated fi nancial statements (IFRS) 86 Notes to the consolidated fi nancial statements 125 Financial indicators 127 Parent company’s fi nancial statements (FAS) Rautaruukki Corporation Annual Report 2008 Annual Report Annual Report Corporation Corporation Rautaruukki 131 Board of Directors’ proposal for the disposal of distributable funds 132 Auditors’ report 133 Statement of the Supervisory Board 134 Figures by quarter Investor information 135 Shares and shareholders 139 Investor relations 140 Information for shareholders Rautaruukki Corporation Suolakivenkatu 1 PO Box 138 20 Rautaruukki’s Annual Report 2008 is published in English and Finnish. The report includes the corporate FI-00811 Helsinki responsibility part. Copies of the report may be ordered by emailing [email protected] and Finland online at www.ruukki.com, where the annual report may also be downloaded in pdf format. Contents Ruukki is a multi-skilled actor Ruukki as a company in the steel and engineering 1 Rautaruukki in brief 2 CEO’s review industries.
    [Show full text]
  • SSAB and Rautaruukki to Combine Through SSAB Making a Recommended Share Exchange Offer to Rautaruukki’S Shareholders
    This stock exchange release may not be published or distributed, in whole or in part, directly or indirectly, in the United States of America, Australia, Canada, Hong Kong, Japan, New Zealand, South Africa or any other country where such publication or distribution would violate applicable laws or rules or would require additional documents to be completed or registered or require any measure to be undertaken, in addition to the requirements under Finnish and Swedish law. For further information, please see “Important notice” in this stock exchange release. STOCK EXCHANGE RELEASE January 22, 2014 SSAB and Rautaruukki to combine through SSAB making a recommended share exchange offer to Rautaruukki’s shareholders The Boards of Directors of SSAB AB (publ) (”SSAB”) and Rautaruukki Oyj (”Rautaruukki” or “Ruukki”) today announce a plan to combine the two companies through SSAB making a recommended public share exchange offer to Rautaruukki’s shareholders with a premium of 20% based on the last three-month volume-weighted average share prices of both SSAB and Rautaruukki. AB Industrivärden (“Industrivärden”) intends to continue to act as the lead active shareholder in supporting the company’s future development. The combined company will be a Nordic and U.S.-based steel company with a global reach and cost-efficient and flexible production. The proposed combination is expected to create substantial value for the shareholders in the combined company through the realization of annual cost synergies of up to SEK 1.4 billion (EUR 150 million).1 The combined company will continue to serve customers with a broad offering within high strength steels, standard strip and plate products as well as tubular products.
    [Show full text]
  • BOTHNIAN BAY LIFE for the Good of the Shared Sea
    BOTHNIAN BAY LIFE For the good of the shared sea PPerameri_life_122004.indderameri_life_122004.indd 1 110.1.20050.1.2005 116:01:556:01:55 Cooperation for the good of the sea BOTHNIAN BAY IS THE NORTHERNMOST basin of the Baltic Sea, and a unique sea area. As a result of the Ice Age, land rises and shoreline ROVANIEMI shifts gradually farther to the sea, islands LULEÅ are born and merged with the continent. OULU Only a few species live in the brackish water and fresh water fi shes thrive. Icebreakers UMEÅ have to assist ships during the winter when VAASA the sea can be ice-covered for even half a year. Because of its northern location, small water volume and scarcity of species, Bothnian Bay is very sensitive to human impact. There are large population centres and heavy industry along the coast. Also the activities on the surrounding land areas affect the state of the sea. The environmental state of the Bothnian Bay is monitored on a regular basis. Many different parties, such as national and regional environmental authorities, industry and municipal wastewater treatment plants, participate The Bothnian Bay in the monitoring. The problem has been the incoherence of the Catchment area 280 100 km2 gathered information and partly its diffi cult accessibility. Water area 36 800 km2 Water volume 1 490 km3 In order to make the information exchange more effi cient and Mean depth 40 m to harmonize monitoring and management of this sensitive sea Maximum depth 148 m area, the Bothnian Bay Life project was started in late 2001.
    [Show full text]
  • Page 1 the RD – PILE SYSTEM Hakan Bredenberg, Dr Tech
    THE RD – PILE SYSTEM Hakan Bredenberg, Dr Tech, Bredenberg Teknik, Sweden 1) Sami Eronen, Dr Tech, Rautaruukki Corporation, Finland 2) Mats Larsson, Technical Manager, Ruukki Sverige AB 3) ABSTRACT The RD- micro pile system is a complete piling system for drilled steel tube piles with diameters from 90 up to 800 mm. The bearing capacity covers from 100 kN up to more than 10 MN. The system consists of - high strength steel tubes - top plate - threaded pile splices - pile toe drill bit The paper gives a description of the system and applications where it is suitable. Some projects where the RD-pile system has been used are mentioned. Design practice for the system is outlined in design guides and tools available on Internet. The description of the RD-system and the design tools are believed to be very valuable for ISM- members when steel tube piles are considered. INTRODUCTION The RD pile system has been developed by the Finish Rautaruukki Corporation. Since the main target for the pile system is Scandinavian countries, it is geared towards point bearing piles. The dominating ground conditions in that region are very soft clay (undrained shear strength about 10 to 20 kPa) overlaying glacial till or bedrock. Thus, the RD-pile system is also suitable at other locations where similar ground conditions are found. In Scandinavia, RD-piles and the Ruukki RR-piles are constantly increasing their share of the piling market. Today, around 40 % of the total volume of piles (about 2 million metes per year) installed are such piles. Main market extensions have been achieved where traditionally precast concrete piles have dominated.
    [Show full text]
  • Local and Distortional Buckling of Perforated Steel Wall Studs
    Helsinki University of Technology Laboratory of Steel Structures Publications 19 Teknillisen korkeakoulun teräsrakennetekniikan laboratorion julkaisuja 19 Espoo 2000 TKK-TER-19 LOCAL AND DISTORTIONAL BUCKLING OF PERFORATED STEEL WALL STUDS Jyrki Kesti Dissertation for the degree of Doctor of Science in Technology to be presented with due permission for public examination and debate in Auditorium R1 at Helsinki University of Technology (Espoo, Finland) on the 8th of December, 2000, at 12 o'clock noon. Helsinki University of Technology Department of Civil and Environmental Engineering Laboratory of Steel Structures Teknillinen korkeakoulu Rakennus- ja ympäristötekniikan osasto Teräsrakennetekniikan laboratorio 2 Distribution: Helsinki University of Technology Laboratory of Steel Structures P.O. Box 2100 FIN-02015 HUT Tel. +358-9-451 3701 Fax. +358-9-451 3826 E-mail: [email protected] Teknillinen korkeakoulu ISBN 951-22-5223-6 ISSN 1456-4327 Otamedia Oy Espoo 2000 3 Kesti, J. 2000. Local and Distortional Buckling of Perforated Steel Wall Studs. Helsinki University of Technology Laboratory of Steel Structures Publications 19, TKK-TER-19, Espoo. 101 p. + app. 19 p. ISBN 951-22-5223-6, ISSN 1456-4327. UDC: 624.014.2, 69.022.3, 693.97, 691.55, 691.71 Keywords: cold-formed steel, local buckling, distortional buckling, steel wall stud, perforation, gypsum board ABSTRACT The local and distortional buckling behaviour of flange and web-stiffened compression members was investigated. In particular, the behaviour of web-perforated sections was investigated both numerically and experimentally. Perforation reduces the perpendicular flexural stiffness of the web and thus particularly reduces the distortional buckling strength of the section.
    [Show full text]
  • Alfons Håkans History 1896 -1930’S
    Alfons Håkans history 1896 -1930’s In 1896, Johannes Håkans, a farmer from Strandas, established a small steam sawmill. The sawmill’s production was modest at first and mainly consisted of sawing timber in order to build houses. However, tragedy struck in 1897 when the mill burnt down, believed to be the work of an arsonist. What was left of the burnt sawmill & property were sold and Johannes emigrated to the USA. It was during this time that the steam sawmill was put back into operation and it even expanded to incorporate a forage and planning mill. Johannes returned to Finland and in 1905 he bought back the mill. The company was registered as a limited company in 1910 and during the next 5 years the first tugs, Leo and Tor, were purchased and were used for shipping timber to the mill. In the 1920s, Johannes’s son, Alfons Håkans, joined the family business. More tugs and pontoons were purchased, among them Kraft and Hurtig (built 1920-21) to name but a few. As a tribute to the early years of the company, several old names are still in use on the modern tugs. Hard times struck again in the 1920s with two devastating fires at the sawmill in addition to the world-wide recession that lasted from 1929 until 1932. However, the company made progress as well, one example being the successful salvage of the Greek 10,000tdw steamship ‘Diamantis’ in 1929. The salvage took place off the rocks of Norrskär Island, just outside the Port of Vaasa and Alfons worked as a diver during the salvage.
    [Show full text]
  • The Problem of Cargo Liquefaction in the Maritime Industry
    The Problem of Cargo Liquefaction in the Maritime Industry KIMON ZOGRAFAKIS SUMMARY Summary This project presents an overview of the cargo liquefaction problem which affects bulk carrier vessels. In particular, gaining a clear understanding of the problem and proposing early solutions, is the main focus of this thesis. The project is divided into several chapters approaching the phenomenon from the point of view of operation and design. The understanding of the nature of liquefaction as well as microscopic and macroscopic behaviour of the material when liquefied, led us to identify the critical parameters that cause cargo liquefaction. The cargoes which are more susceptible to liquefaction are iron ore fines and nickel ore even though any granular cargo may liquefy. Ship safety is affected by those cargoes when their form is changed during the voyage and the consequences may be catastrophic both for the vessel and the crew. Detailed accident statistics in the recent years indicate that small size ships, such as Handymax vessels are more at risk due to liquefaction than larger ships, where no accident has occurred so far. Progress in the Code of Safe Practice for Solid Bulk Cargoes (BC Code), which was adopted in the mid 60’s due to a spate of losses, led to the adoption of the International Maritime Solid Bulk Cargo Code (IMSBC Code). However, serious shortcomings in regulations still prevail, thus forcing a revision of the code. Developments in different disciplines of engineering, like soil mechanics, offshore engineering and mechanics of materials helped us enhance understanding in the marine field. Similarities of the problem in those areas allowed us to transfer valuable knowledge to our field.
    [Show full text]
  • Rautaruukki Annual Report 2006 Ruukki in Brief
    Rautaruukki Annual report 2006 Ruukki in brief Rautaruukki supplies metal-based components, systems and integrated systems to the construction and mechanical engineering industries. The company has a wide selection of metal products and services. Rautaruukki has operations in 23 countries and employs 13,000 people. The company’s share is quoted on the Helsinki Exchanges (Rautaruukki Oyj: RTRKS). The Corporation has used the marketing name Ruukki since 2004. Ruukki has three divisions with customer responsibility: Ruukki Construction, Ruukki Engineering and Ruukki Metals. The fourth division, Ruukki Production, is responsible for cost-effective production. Ruukki Construction Ruukki Engineering Ruukki Metals Ruukki Construction supplies Ruukki Engineering supplies Ruukki Metals supplies a wide metal-based solutions for building metal-based solutions to the selection of steel, stainless steel construction, especially for retail, lifting, handling and transporta- and aluminium as standard industrial and logistics construc- tion equipment industry, as well as and special products, parts and tion, as well as for infrastructure to the paper and wood processing, components. construction. shipbuilding, energy and offshore industries. Ruukki Production Ruukki Production manufactures hot-rolled, cold-rolled and coated plate and strip products, as well as steel tubes for Ruukki’s divisions with customer responsibility. Ruukki’s strategic intent A leading A leading Leading metal-based solution provider for metal products supplier construction solution
    [Show full text]
  • Rautaruukki Annual Report 1996 Rautaruukki
    ANNUAL REPORT 1996 CONTENTS Rautaruukki 1996 1 Annual General Meeting Statement by the President 2–3 The shareholders of Rautaruukki Oy are invited to Share Information 4–5 the Annual General Meeting to be held on Tuesday 25 Group Administration 6 March 1997 at 10 a.m. at the Hotel Radisson SAS Group Structure 7 Helsinki, address Runeberginkatu 2. Rautaruukki’s Steel Production and Upgrading 8–9 Shareholders who wish to attend the meeting must give notice no later than 4 p.m. on Monday 24 March, Rautaruukki Accounts either in writing to Report of the Board 10–14 Rautaruukki Oy, Consolidated Profit and Loss Account 15 P.O. Box 860, FIN-00101 HELSINKI Consolidated Balance Sheet 16–17 or by phone Consolidated Funds Statement 18 +358 9 4177 202/Taina Vilppala. Rautaruukki Oy’s Profit and Loss Account 19 Rautaruukki Oy’s Balance Sheet 20–21 Only those shareholders may attend who have been Rautaruukki Oy’s Funds Statement 22 entered in the shareholders' register maintained by Notes to the Accounts 23–36 Suomen Arvopaperikeskus Oy no later Than 14 Board Proposal for the Use of Profit 37 March. Auditors’ Report 38 Statement by the Supervisory Board 38 Proposal for Dividend The Board of Directors of Rautaruukki Oy will pro- pose to the Annual General Meeting that the share- holders should be paid a dividend for 1996 of FIM Business Unit Reports 1.50 per share. The Board of Directors will propose Raahe Steel 39–41 the payment of the dividend on 4 April 1997 to Strip Products 42–43 those shareholders who were entered in the owners' register on the matching day 1 April 1997.
    [Show full text]