HT30746 Connector Guide.Indd

AS HIGH-DEFINITION TELEVISION COMMON CONNECTORS SIGNALS VS IMAGE DEFINITION CCABLESABLES & AAVAILABLEVAILABLE TTHEIRHEIR FFUNCTIONUNCTION PPIX-O-METERIX-O-METER CCONNECTORSONNECTORS SSIGNALSIGNALS 7755 OOHMHM CCOAXOAX Carries off -air digital broadcast signals (channels) from an antenna 480i, 480p, 720p, or 1080i digital signals (DDIGITALIGITAL RF)RF) to the DTV. (depends on the broadcast signal). UULTIMATELTIMATE For the ultimate resolution of local High-Defi nition off -air broad- *(Sanyo HDTVs convert 480i, 480p, casts. 720p, and 1080i signals to their native — format [720p or 1080i] for display.) — DIGITAL HHDMIDMI Uses just one cable to transfer full-bandwidth digital video and 480i, 480p, 720p, or 1080i digital signals — 5.1 channels of audio, when available, for the ultimate in picture (depends on the output device and/or — resolution and sound quality. These signals may be output by a your subscription service). — Satellite Receiver, Digital Cable Box, DVD Player, or other compat- *(Sanyo HDTVs convert 480i, 480p, — ible digital equipment to the HDTV. 720p, and 1080i signals to their native — format [720p or 1080i] for display.) — Transfers full-bandwidth digital video for the ultimate resolution 480i, 480p, 720p, or 1080i digital video DDVIVI — (PPluslus RCA)RCA) from a Satellite Receiver, Digital Cable Box, DVD Player, or other signals (depends on the output device compatible digital equipment to the HDTV. and/or your subscription service). — (Connect it to the HDTV’s HDMI jack using an adapter [not sup- *(Sanyo HDTVs convert 480i, 480p, — plied]. Separate analog audio connections are required.) 720p, and 1080i signals to their native — format [720p or 1080i] for display.) — Used to transfer digital audio signals (in the form of light pulses). Multi-channel audio, such as, 5.1 chan- FFIBERIBER OPTICSOPTICS — This signal is available for output from the HDTV to a multi-channel nels of surround sound, when received receiver only when received as part of the digital antenna signal or as part of the original signal. EEXCEPTIONALXCEPTIONAL when received through the HDMI jack from an HDMI source. — CCOMPONENTOMPONENT Transfers individual GGreenreen, BBluelue, and RReded analog signals for 480i, 480p, 720p, or 1080i analog — exceptional resolution. These signals may be output by a Satel- signals (depends on the output device Y Pb Pr — (PPluslus RCA)RCA) lite Receiver, Digital Cable Box, DVD Player, or other compatible and/or your subscription service). ANALOG equipment to the HDTV. *(Sanyo HDTVs convert 480i, 480p, BEETTTTEERR (Separate analog audio connections are required.) 720p, and 1080i signals to their native — format [720p or 1080i] for display.) SS-VIDEO-VIDEO Transfers separated analog luminance and chroma signals from a 480i (standard analog) — (PPluslus RCA)RCA) VCR or similar device to the TV for better picture resolution. Due to *(Sanyo HDTVs convert 480i signals to — severe HD resolution limitations, Sanyo recommends strongly that you their native format [720p or 1080i] for — not use this option to connect HD equipment to your Sanyo HDTV. display.) (Separate analog audio connections are required.) — CCOMPOSITEOMPOSITE Transfers a composite analog luminance and chroma signal (yel- 480i (standard analog) — (RRCACA) low connector) from a VCR, or similar device, to the TV (left and *(Sanyo HDTVs convert 480i signals to GGOODOOD right audio signals are carried by the white and red connectors their native format [720p or 1080i] for IIMAGEMAGE respectively). display.) DDEFINITIOEFINITION Due to severe resolution limitations, Sanyo recommends strongly that you not use this option to connect HD equipment to your Sanyo HDTV. © 2006 Sanyo Manufacturing Corporation 2006 Sanyo Manufacturing © *CConversiononversion ooff 4480i,80i, 4480p,80p, 7720p,20p, aandnd 11080i080i ssignalsignals ttoo nnativeative ddisplayisplay fformatsormats ddoesoes nnotot iincreasencrease nnoror ddecreaseecrease tthehe rresolution.esolution. Th e mmaximumaximum rresolutionesolution tthehe HHDTVDTV ccanan ddisplayisplay ddependsepends oonn tthehe iinputnput ssignal.ignal. EQUIPMENTTODTV CONNECTOR CROSSREFERENCE CHART ‡EEXTERNALXTERNAL YOUR SANYO HIGH-DEFINITION DTV HAS THESE CONNECTORS EEQUQUIIPMENTPMENT & DDIGITALIGITAL RRFF HHDMIDMI (DVI* equipment can be CCOMPONENOMPONENT* SS-VIDEO-VIDEO* CCOMPOSITEOMPOSITE* DDIGITALIGITAL SSTEREOTEREO AANNTTENNASENNAS TTERMINALERMINAL connected using an adapter.) AAUDIOUDIO OUTOUT OOUTUT YYOUOU MAYMAY HAVEHAVE DVI to HDMI Cable USE THE BE UUSE THE ANTENNA S

Digital Yes 1 Yes E

No No T Analog H

L E

A DIGITAL CABLE

B N 2 G

** Yes Yes E I HD Receiver S S SST E or 3 T C No Yes Standard Receiver T S R

A CCONNECTION U

C SATELLITE O O D SSOURCES 2 N A HD Receiver ** Yes Yes O N R No Yes3

BROADCAST SIGNAL BBROADCAST or

Standard Receiver E

ANALOG CABLE C T

or No Yes3 I With Box O

Without Box No No N

2 AAVAILA DVD PLAYER/RECORDER ** Yes Yes V L A ** 2 A

S Yes Yes N DVR I E G L I C or Yes 2 Yes 3 S GAME CONSOLE R A

U R

or 3 BBLE E No Yes O VCR L H SSOURCES

T When using an AV Receiver, connect the Digital Audio Out from your external equipment, when available, to the Digital Audio In on MULTICHANNEL 5.1 1,2 E OTHER SIGNAL OOTHER your AV Receiver. NOTE: When the HDMI output of your external device is connected to the DTV HDMI jack, connect the DTV Digital Yes Yes AV RECEIVER Audio Output to the AV Receiver instead. IMAGE DEFINITION ULLTIMATETIMATE EEXCEPTIONALXCEPTIONAL BBETTERETTER GOOD DIGITAL ‡ The maximum number of video connections is four 1 When received as part of the digital antenna signal. (HDMI, Component x2, and S-Video or Composite), 2 With HDMI connection (excluding DVI) and when received as part of the digital signal. ANALOG plus two RF. 3 Mono only with analog RF input. * Requires separate analog audio connections. ** This hook-up will reproduce signifi cantly lower resolution, and is therefore, not recommended by Sanyo for this device. Color-Coding Th e charts and connection diagrams in this guide are color-coded for easy identifi cation. For the Ulltimatetimate picture resolution, choose a GGreenreen connection option for your HD equipment. When these connectors are not available, GGoldold is an EExceptionalxceptional alternative. GGreenreen and GGoldold options both provide High-Defi nition reception when the signal contains High- Defi nition content. Th e signal makes the diff erence! Page 2 HT30746 EXTERNAL HD CONNECTIONS

THE ULTIMATE DEFINITION HDMITOHDMI & EEXCEPTIONALXCEPTIONAL DEFINITIONDEFINITION OPTICAL DIGITAL AUDIO

COMPONENT HDMI CONNECTION CONNECTIONS HDMI INPUT3 INPUT DIGITAL AUDIO DIGITAL CONNECTION AUDIO DTV OUTPUT VIDEO INPUT BACK R L (MONO) Pr Pb Y UHF DIGITAL VHF ANTENNA IN CATV DTV BACK L

INPUT2 INPUT3 INPUT1 ANALOG AUDIO OUTPUT AUDIO VIDEO S-VIDEO Cables are not supplied. R L R L INPUT1

DEO (MONO)

THE ULTIMATE DEFINITION HDMITODVI COMPONENT CONNECTIONS INPUT2

† HDMI TO DVI ADAPTER CABLE Color-Coding Th e charts and connection diagrams in this guide are color-coded for UHF DIGITAL VHF VIDEO INPUT ANTENNA IN easy identifi cation. For the Ulltimatetimate picture resolution, choose R L (MONO) Pr Pb Y CATV † When using HDMI to connect your DVI device, an adapter cable is a GGreenreen connection option for your HD equipment. When these required. connectors are not available, GGoldold is an EExceptionalxceptional alternative.

INPUT2 INPUT3 INPUT1 ANALOG AUDIO OUTPUT AUDIO VIDEO S-VIDEO R L R L NOTE: INPUT3 audio jacks are used GGreenreen and GGoldold options both provide High-Defi nition reception (MONO) to receive the audio. when the signal contains High-Defi nition content. DTV BACK Th erefore, INPUT3 video jacks cannot DVI AUDIO be used with a DVI hook-up. CONNECTION Th e signal makes the diff erence! Page 3