Where Should My Sump Pump Water

Total Page：16

File Type：pdf, Size：1020Kb

For additional information Residential Sump Pump Discharge on how to keep Wichita WHERE SHOULD waterways clean please visit Down the Storm MY SUMP PUMP TadsWater.com Drain. Out of Your WATER GO? HERE ARE A FEW HELPFUL TIPS Life? Think Again. DRAIN AWAY FROM HOME AND ONTO GRASS • Run your sump pump drainage away from your home. TadStormwater Make sure your sump pump Spokesfrog • Do not let it flow onto driveways, discharge leads to the proper sidewalks or other paved surfaces. location. SUMP PUMP DISCHARGE MUST BE CLEAN CONTACT US • Discharge must be clear, clean water Questions about such as ground water or residential air Stormwater Utility Charges 265-1300 conditioner condensate. • Discharge cannot contain water from any Report Illegal Discharges other items that utilize household plumbing 268-4498 such as washing machine, a sink or a tub. Storm Sewer Issues 268-4090 Recycling Questions 660-7200 TO BE A GOOD NEIGHBOR DON'T DISCHARGE: Sedgwick County • Within 7.5’ of a public sidewalk Household Hazardous Waste Facility • Within 10’ of a street curb 660-7458 • Within 2’ of a side property line • Within 5’ of a rear property line Stormwater Management INSTALL A RAIN GARDEN City of Wichita • Rain gardens slow stormwater as it travels Public Works & Utilities Department downhill, giving stormwater more time 455 N. Main, 8th Floor to infiltrate and less opportunity to gain Wichita, KS 67202 momentum and cause erosion. (316) 268 - 4498 www.wichita.gov WHERE DOES STORMWATER RUNOFF GO? There are two different sets of pipes in the ground. STORMWATER PIPES • Carry rainwater runoff from driveways, SANITARY SEWER PIPES streets, parking lots, etc. • Carry wastewater from toilets, tubs, sinks, etc. • Deliver that water to the nearest creek, • Flow to local sewage treatment plants. pond, channel or river. • Treated water is disinfected before being discharged into a river. STORMWATER CURB INLET SANITARY SEWER PIPE FROM INDOOR PLUMBING CATCH BASIN TWO STORMWATER PIPE UNDERGROUND OUTFLOW TO SEWAGE OUTFLOW TO CREEK, SYSTEMS TREATMENT PLANT POND, CHANNEL OR RIVER.

Copy Link

Recommended publications

Private Sewer Systems Defects and Overflows How Do Sewer System
Private Sewer Systems Defects and Overflows Most sanitary sewer systems are constructed as a network of manholes and pipes that flow from each building that generates sewage to a wastewater treatment plant. Private services, also called laterals, are pipes from the building to the sewer main. In some areas, the public system owns and maintains the “lower lateral” from the sewer main to the edge of the easement or right-of-way, and the private property owner owns and maintains the “upper lateral” the remainder of the way to the building. In other areas, the private property owner owns and maintains both the lower and upper laterals. Finding and fixing sewer defects on private property sewer systems can prevent sewer overflows and backups that can cause health hazards, inhibit economic growth, and result in long-term environmental damage. How Do Sewer System Defects Cause Overflows? Private sanitary sewer systems, the earliest of which were built in the mid 1800s, carry domestic wastewater away from private properties separately from stormwater. These systems have deteriorated over the years, are typically not maintained or replaced due to funding, and their ability to transport sanitary wastewater has been compromised due to population growth. As a result, these systems can experience separate sanitary sewer overflows (SSOs) both on public and private property. SSOs are generally caused by infiltration that occurs when clean water such as groundwater enters the sanitary sewer through defects in the system or inflow from stormwater that enters the system through defects and illegal connections. SSOs can also be caused by inadequate pipe sizes when population growth exceeds the original design conditions.
[Show full text]
Actions for Flood Resilient Homes: Sewage Ejector Pump
Actions for Flood Resilient Homes: Sewage Ejector Pump What is a sewage ejector pump? Who needs a Sewage Ejector Pump? A sewage ejector pump is used when plumbing fixtures You’ll need an ejector pump if you have plumbing fixtures at a in your home are located below the main sewer line (e.g., lower level than the municipal sewer line. basement bathrooms or laundry rooms). It is designed to A permit is/is not required elevate wastewater so it can move up and out of your home to the sewer. Before flood action During flood action After flood action How does a sewage ejector pump Other considerations work? • A standard ejector pump kit with a ½- to ¾-horsepower A sewage ejector pump is required when a motor and a 30- or 40-gallon tank is normally big enough for an home’s wastewater discharge pipe is elevated average residential installation. above plumbing fixtures. The advantage • You may opt to install a backup pump to guard against failure. of having an elevated discharge pipe is that You can also consider buying a pump that sounds an alarm sewage in the city sanitary pipes is less likely to when the pump fails. flow into the home by gravity. This approach is similar to the use of a backflow prevention • Ejector pumps generally last several years if well maintained. valve. You should schedule a plumber for annual service (cleaning the pump, oiling the motor, inspecting the float and condition of the Like a sump pump, an ejector pump sits in pump, removing debris lodged in the tank).
[Show full text]
Solving Sewer Overflows: Foundation Drains: in Some Homes, Sump Pumps Were Installed to Discharge Water Is Essential, but Can Cause Problems Solutions
COMMON HOME DRAINAGE Inflow and infiltration is a problem that How do I get started? affects everyone in area communities. Clean Read this brochure to learn more about I & I and possible Solving Sewer Overflows: Foundation Drains: In some homes, sump pumps were installed to discharge water is essential, but can cause problems solutions. Then, contact your municipal wastewater utility. water directly into a drain pipe or the basement sink. Many homes have special drain pipes installed around They will be able to direct you to local programs and This method still allows clear rainwater to enter the if misdirected around homes and sewers. the base of the foundation to catch and drain water information about I&I in your community. A Simple Guide for Homeowners sanitary sewer. To redirect your sump pump, a new that runs down the outside of the house. These rigid outlet pipe should be installed to exit through the Determine if your home is part of the Cloquet . (218) 879-6758 foundation drains direct water into the sump pit in exterior wall of your basement. This pipe should carry problem. You can stop inflow and infiltration the basement, where it should be pumped out by a Scanlon . (218) 879-4578 water at least four feet away from the foundation sump pump into the yard. Clear rainwater runoff from your home through some quick and easy Duluth . (218) 730-4130 through an above or below ground extension. from foundation drains should never be allowed to solutions. Properly installed gutters and a Hermantown . (218) 729-3625 drain into the sanitary sewer.
[Show full text]
Sump Pump Information Card
Sump Pumps into the Sanitary Sewer Create Health and Safety Risk! Aside from the fact that connecting sump pumps to the sanitary sewer is illegal, it can cause significant health and safety risks. Sump pumps are designed to pump groundwater and rain water. Generally, the sanitary sewer pipe in the street is only 8 inches in diameter, and often the pipe slope is not very steep. Many 8 inch sewer pipes are installed with a slope of 0.4%. This means that for every 100 feet of pipe, the pipe goes downhill less than 5 inches. This low slope condition is very common in Washington County sewer collection systems, which means there is only so much sewage water that can flow through this pipe. For this type of sewer pipe, about 300 gallons of water can flow through it in a minute. If more sewage than this tries to get through the pipe in the street, the sewage will surcharge, that is start filling up the sewer lateral pipes that run to the sewer main from houses. When even more sewage or extra water is sent to the sewer pipe, it will surcharge even farther, eventually pushing back into someone’s basement. The sewage might come out of a neighbor’s basement toilet or washing machine drain for example. If hooked up to a house’s sewer lateral, a half-horsepower sump pump will pump about 60 gallons to the sewer each minute. That means that if 5 pumps are connected to the sewer, it will be full. Normal sewage flows often fill the sewer main more than half-way already.
[Show full text]
Homeowner's Guide to Drainage Problems and Solutions
< O •OOOOOOOO•••••••••••OO O OO OO•OO O• ooooOo o•o •O••••• ••OOOOOOOOOOOOO ••OloOI oo0000000000 004•00•0•00•••• •••o 000 00 0 0 00 ..00000000000•0 0U • 00 0 ..000000 •• •• oooo00o ..OOOO OOO•••oo ....000•000 ..0 00 • 0000 ..000000• 0 00 0•00000 ..000000o•OU•o oo ..OOOO OOO A H O M E O W N E R ' S G U I D E T O D R A I N A G E P R O B L E M S A N D S O L U T I O N S Prince George’s County Department of the Environment Residential Drainage A HOMEOW NER' S GUIDE TO DRAINAGE PROBLEMS AND SOLUTIONS Contents 1. Introduction ............................................................................................. 1 2. Basement Flooding Problems .......................................................... 1 2.1 Basement Construction ........................................................ 1 2.2 Primary Causes of Basement Flooding ....................................... 2 2.2.1 Break in Waterline Connection or House Plumbing ............... 2 2.2.2 Direct Inflow of Surface Water .................................. 2 2.2.3 Surface Water Infiltration .......................................... 3 2 .2.Li Groundwater Infiltration ......................................................... 5 2 .2.5 Areaway Drain Surcharge or Blockage .................................. 5 2.3 Determining the Best Course of Action ........................... 6 3. Basement Waterproofing & Drainage Systems ............................. 6 3.1 Reparging Exterior Walls ..................................................... 6 3.2 Exterior Barriers & Soil Treatments ...................................
[Show full text]
Reducing Inflow and Infiltration Part 1: Sump Pumps
REDUCING INFLOW AND INFILTRATION PART 1: SUMP PUMPS In this series of articles I will discuss cost effective ways of reducing inflow and infiltration to our wastewater facilities. Inflow and infiltration are defined below. INFLOW: “THE WATER DISCHARGED INTO A SEWER SYSTEM AND SERVICE CONNECTIONS FROM SUCH SOURCES AS ROOF DRAINS, SUMP PUMPS, FOUNDATION DRAINS, COOLING WATER DISCHARGES, MANHOLE COVERS, COMBINED SEWER SYSTEMS, CATCH BASINS, STORM WATER AND SURFACE RUNOFF” INFILTRATION: “THE WATER ENTERING SEWER PIPES AND SERVICE CONNECTIONS FROM THE GROUND. DEFECTIVE PIPES, JOINTS, CONNECTIONS AND MANHOLE WALLS ARE COMMON LOCATIONS OF INFILTRATION” Sump pumps are used by some home owners to remove unwanted water from basements. Unfortunately, a lot of these sump pumps are hooked into home owner sewer lines. This is a direct connection to the sewer collection system and results in extra influent flow, that the collection system has to handle and the wastewater facility has to treat. This treatment of unwanted ground/surface water wastes valuable facility capacity and restricts the amount of future hookups and growth of a community. A huge waste of money and time will result in wastewater facility upgrades due to lack of capacity that has been taken up by inflow and infiltration sources. Sump pump discharges can also cause wwtfs to use extra electricity, chemicals and can affect the efficiency of the treatment process. A typical homeowner sump pump (40 gallons/minute) running 10 minutes per hour can pump 9,600 gallons per day. If there are 20 similar sump pumps in your community, 192,000 gallons of unwanted water is being sent to your wastewater facility in one day! There are several ways to ensure that sump pumps are not tied into sewer collection systems: -Education, Many home owners do not realize the problems they are causing by hooking sump pumps into their sewer lines.
[Show full text]
Sump, Sewage and Effluent Pump Selection Guide
Sump, Sewage and Effluent Pump Selection Guide This guide is designed to assist individuals with selecting the proper style and size pump for a submersible pumping application. There are a few considerations to factor in when selecting a pump, pump operation, horsepower, voltage and phase, and GPM total (gallons a pump will move in 1 minute). This guide will provide information for the basic residential or light commercial/industrial submersible pump selection process. Pump Operation Selection: Submersible Pump- A pump that has its motor and electrical components sealed in a protective housing to permit use under water or other liquid conditions. Sump Pump- Manufactured to remove unwanted drain water from a basement sump pit and drain tile systems; parking lots and low land areas where lack of a gravity drain allows water to pool. Sump pumps are rated for ground or waste water mostly clear of solids (nothing more than silt and ground water solids less than ¼” diameter). Mostly installed where basement flooding is a problem, and to remove moisture from around foundations in order to prevent mold/mildew build-up. Discharge pipe size ranges from 1” and up, based on existing drain line applications. Effluent Pump- Engineered for “gray” water or waste water (mostly liquid) applications that contains solids of ¾” in diameter or less. This is often waste water that has passed through a septic or settling tank and needs to be pumped into an additional system or treatment area. Discharge pipe size ranges from 1 ½” and up, based on existing drain line applications. Sewage Pump- Mostly used in raw sewage applications or dewatering where up to 2” diameter solids must be passed through the pump.
[Show full text]
Disconnecting and Redirecting Your Sump Pump and Downspouts
City of Pueblo It is where the sump pump discharges that Wastewater Department maybe illegal, not the sump pump itself. Emergency Telephone Numbers for Sewer Problems Sump pumps are used to pump groundwater During the business day: 553-2898 to the outside of the basement of buildings. Disconnecting and This groundwater may be discharged to exte- At Night, on weekends or holidays: rior yard, nearby catch basin or storm drain. 553-2502 Redirecting your Sump A sump pump is considered illegal when connected to the sanitary waste piping City crews are on 24 hour standby, Pump and Downspouts (sewer). including weekends and holidays. Maintenance City of Pueblo Sump systems, similar to backwater sanitary Wastewater Department valves, are not maintenance free. In order to best protect your home from flood damage, Nancy Keller, Wastewater Director ................ 553-2894 follow the pump manufacturer’s recommen- dations for servicing and maintenance of your Leon Marquez, Collection Supervisor .............. 320-2900 pumps. John Lindstrom, Water Reclamation Facility Superintendent ....................................................... 553-2866 Sump pump discharge lines need to be In a community of a couple hundred homes, it Sonia Mondragon, Engineering Manager .......... 553-2890 equipped with a check valve which prevents only takes a few improperly connected sump pumps working in wet weather to cause a the water contained in the pipe above the On The Web sanitary sewer backup into basements, streets, sump pump from flowing back into the sump and waterways. http://www.pueblo.us/wastewater when it shuts off. Environmental impacts EPA requirements for selenium and sul- fate Why Sump Pumps Shouldn’t Wastewater treatment systems that are in place today were built to keep waterways clean for you The Pierre Shale formation that underlies Discharge to the City Sewer to use.
[Show full text]
Sewer Information the City of Port Townsend Has 77 Miles of Sanitary Sewer Lines, 1,205 Manholes and 7 Lift Stations Within Its Sanitary Sewer System
City of Port Townsend Sewer Information The City of Port Townsend has 77 miles of sanitary sewer lines, 1,205 manholes and 7 lift stations within its sanitary sewer system. Sanitary sewer system problems are not common and the Public Works Department's maintenance procedures are intended to avoid or minimize such problems in the system to the maximum extent possible. The Department attempts to continually maintain its portion of the sanitary sewer system to be as trouble free as possible. The City is responsible for the sewer mains. The Customers are responsible for their sewer service line, or side sewer. This runs from the residence/business to the connection to the sewer main line. Sewer System Maintenance Program Each year, the Public Works Department cleans approximately one-quarter of the City's sanitary sewer lines. Cleaning begins in March, early April through October. Some of the lines are cleaned more frequently to keep them functioning properly. The sanitary sewer lines are cleaned using high performance sewer cleaning equipment. A cleaning nozzle is propelled from one manhole to the next using water under high pressure (1,500 to 2,000 PSI). The nozzle is then pulled back to the starting manhole. As the nozzle is pulled back, water scours the inside of the sanitary sewer pipe. Any debris in the pipe is pulled back with the water. The debris is removed from the manhole with a vacuum unit. If roots are found, they are cut with a root cutter. This process is repeated on every sewer line cleaned. We clean and root cut any problem areas one to two times per year.
[Show full text]
MWRD Infiltration and Inflow Brochure
Don’t Flood Yourself! I&I: A Quick Guide How to help prevent I&I for Homeowners 9 Repair or replace broken or missing This pamphlet is an introduction to cleanout caps. infiltration and inflow (I&I) which can cause flooding, sewer backups and overflows 9 Disconnect downspouts discharging to in sanitary sewer systems. Homeowners the sanitary sewer. Redirect their flow can use this guide to learn about ways to to a pervious area, storm sewer, or rain reduce I&I. barrel. Rain Barrels are available at www. A Quick Guide for Homeowners mwrd.org. For more detailed information and other helpful resources, please visit mwrd.org 9 Cover window wells to prevent rain and or contact the MWRD at 312.751.3260. snow from entering window well drains. 9 If your home has a stormwater sump pump, make sure it does not discharge to the sanitary sewer. A licensed plumber can check it and make any necessary modifications. 9 Disconnect driveway drains from the sanitary sewer and direct their flow into a pervious area, to the storm sewer, or to your foundation drain as long as your foundation drain is not connected to the Infiltration sanitary sewer system. 9 Have your home’s service lateral inspected and repair, rehabilitate, or have it and Inflow replaced. 9 Plan your landscaping to avoid root intrusion into sanitary sewer pipes. 9 Check with your municipality about cost-sharing programs to help fund I&I reduction. Metropolitan Water Reclamation District of Greater Chicago Board of Commissioners Kari K. Steele Cameron Davis President Kimberly Du Buclet Barbara J.
[Show full text]
Stormwater Management Green Infrastructure
�hen it rains, stormwater For more information: washes over the ground and picks up contaminants CITY OF CAMBRIDGE such as oils, fertilizers and dog waste, washing them into local rivers. Biobasins Stormwater and porous paving are important stormwater management strategies Management that the City has put into place to treat these City of Cambridge contaminants before they discharge to outfalls at the Department of Public Works & Alewife Brook and the Charles River. For this reason, Green 147 Hampshire Street these stormwater quality enhancements, along Cambridge, MA 02139 Infrastructure with water coming from basement sump pumps 617-349-4800 must be properly maintained in order to protect the www.cambridgema.gov/theworks INFORMATION GUIDE environmental impacts these elements provide. RESIDENT GUIDE City of Cambridge Stormwater Management DID YOU KNOW? www.cambridgema.gov/theworks/ourservices/ stormwatermanagement Stormwater discharges are contributing to at least 55% of impairments to Massachusetts’ The City’s ongoing construction assessed waters. and maintenance efforts are A typical city block will an important part of keeping generate over five times Cambridge clean and sustainable. more runoff than a woodland area of equal size. Cover photo: Alewife Stormwater Wetland Inside panel photo: Charles River outfall along Memorial Drive Back panel photos: Alewife Stormwater Wetland Photos provided by Kleinfelder, MWH Global, and Chester Engineers MARCH 2016 Basement Sump Pumps HOW YOU CAN HELP SUMP PUMPS DISCHARGE ONTO GROUND, INTO DRAINAGE DITCH OR INTO A If you have a basement, your CONNECTION TO THE STORM DRAIN property may have a sump pump. A sump pump helps keep your While the City will continue to monitor and maintain these areas, you can help us with these enhancements by: DOWNSPOUTS DRAIN basement dry by collecting and ONTO GROUND pumping high ground water Basement Sump Pumps: from below your basement floor, • Clean the pump inlet screen or rainwater from around your • Keep sump pump pit free of debris foundation.
[Show full text]
4 SEWAGE PUMPING STATIONS Design Specifications
Design Specifications & Requirements Manual 4 SEWAGE PUMPING STATIONS 4.1 DEFINITION AND PURPOSE ...................................................................................... 1 4.2 PERMITTED USES ..................................................................................................... 1 4.3 DESIGN CRITERIA ..................................................................................................... 1 4.3.1 General ........................................................................................................ 1 4.3.2 Site Layout and Servicing ............................................................................ 2 4.3.3 Structural ..................................................................................................... 3 4.3.4 Flow Capacity .............................................................................................. 3 4.3.5 Pumps ......................................................................................................... 4 4.3.6 Channels ..................................................................................................... 5 4.3.7 Pump Controls ............................................................................................. 5 4.3.8 Valves and Fittings ...................................................................................... 5 4.3.9 Flow Measurement ...................................................................................... 6 4.3.10 Wet Wells ...................................................................................................
[Show full text]