DOCSLIB.ORG

Live Sound – Pa Systems and Powered Mixers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Live Sound – Pa Systems and Powered Mixers order/info: 1·800·426·8434 • www.bswusa.com Yamaha StagePAS 500-Watt PA Yamaha’s StagePAS 500 is a lightweight, easy- to-use 500-Watt PA system boasting a pair of high-performance 2-way passive speakers and a built-in 10-channel mixer powered by dual 250-watt amps. It sets up in seconds, while offering excellent sound quality and versatility with plenty of advanced features to make the most of your performance. The versatile mixer has its own compartment in one of the speakers and can be detached for extra flexibility. It gives you 10 input channels in all: four mono microphone/line inputs and three stereo line inputs. The additional stereo channel can used for either a stereo or mono source. In addition to the main speaker outputs the mixer has line outputs that can be used to connect additional powered speakers for monitoring, and to send the mixer's output to a recording device. It also boasts an auto limiter to prevent overload damage to power amplifier and speakers and an LED output level meter. It comes with 2 speaker cables so you can use it right out of the box. FeatURES: • Complete 500-watt PA system: weighs less than 53 lbs. • 2 top quality speakers with 10" LF and 1" HF drivers • Detachable 10-channel powered mixer STAGEPAS300PKG • 4 mono mic/line inputs (XLR and 1/4") with switchable phantom power; 3 stereo line inputs (RCA and 1/4") • Main speaker, Monitor and Record outputs Yamaha StagePAS 300-Watt PA System • 2-band EQ on every channel; Limiting/Compression on channels 1 and 2; Reverb on channels 1-4 Yamaha’s StagePAS 300 PA system has the power to go with you no matter where your gig takes you. By combining a built-in powered mixer and two PA speakers it lets you set up a STAGEPAS500 List $1,249.00 professional sound system in minutes! Crisp highs. Punchy mids. Big, fat bass. The StagePAS 300 delivers a remarkably clear, powerful sound. For minimum stage clutter, the built-in Call BSW For Lowest Price: 800-426-8434 powered mixer can be left inside the storage compartment of one speaker during operation. Accessories: Speaker cables are included, too. There’s even a convenient storage compartment in the YBSP500 Rolling soft case for StagePAS500 speaker other speaker box for packing the included power cable. The built-in amplifier puts out a full (need to buy 2) $89.99 each 150 watts of power into each channel. This provides you with the sonic muscle you need to fill small- and even medium-sized venues. The mixer also provides connections for two sets of stereo inputs for keyboards or CD/MP3 players, as well as a digital reverb for adding a rich ambience to your voice. Behringer BSW’s StagePAS 300 Package adds four Audio-Technica ST95MKII dynamic microphones, four PMP 518M mic boom stands and four 25-foot XLR cables. To conveniently mount the StagePAS speakers, Powered you get two Yamaha ADP138 stand mounts along with two of our best-selling On-Stage Mixer Stands speaker stands (with carry bag). This package also includes the handy Yamaha BMS10A This powered adaptor to give you the option of mounting your StagePAS mixer unit to a mic stand for quick mixer from Behringer boasts new-generation amplifier technology to accessibility. It’s everything your remote gig needs except the high price! deliver crystal-clear sound in a compact, lightweight design. It features STAGEPAS300 List $789.00 $599.00 24-bit stereo FX processing, quality IMP mic preamps, phantom power, STAGEPASS300PKG List $1,383.79 $789.00 comprehensive EQ, ultra low noise ULN design for the highest possible headroom and much more. With 180-watts, the rack-mountable Accessories: PMP518M gives you 5 mic/line channels plus 2-track in/ ADP138 Special stand mount for affixing StagePAS speaker $14.99 each output and Feedback Detection. YBSP300-CA Rolling soft case for StagePAS 300 $119.99 PMP518M List $393.99 $196.99 Yamaha EMX Powered PA Mixers Yamaha’s EMX Series powered mixers deliver powerful performance (dual 200, 300 or 500 watts) in compact and economical units. The EMX212S, EMX312SC and EMX512SC offer 12 input channels: four for mic (includes phantom power) or line input, plus four pairs that can function either as monaural microphone inputs or stereo line inputs—providing you with a versatile mix of input capabilities for a wide range of applications. The EMX5014C and EMX5016CF offer 14 and 16 input channels, respectively. You also get 16 top-quality Yamaha effects and plenty of EQ flexibility. EMX212S Dual 200-watt List $499.00 $419.99 EMX312S Dual 300-watt List $629.00 $529.99 EMX512S Dual 500-watt List $749.00 $629.99 EMX5014C Dual 500-watt List $919.00 $759.99 EMX5016CF Dual 500-watt List $1,249.00 $1,099.99 Accessories: SKJ-425 Speaker cable, 25 ft., 1/4"-to-1/4", 14 AWG x 2 $20.99 each RK512 Rackmount kit for EMX512S $39.00 RK5014-CA Rackmount kit for EMX5014C $39.00 197 LIVE SOUND – PA SYSTEMS AND POWERED MIXERS order/info: 1·800·426·8434 • www.bswusa.com Samson XP308i and XP510i Portable PA Systems A compact PA system with dual 2-way speakers, on-board mixer, built-in iPod dock and 300 watt power amplifier, the XP308i is the ultimate in portability thanks to a clever, lightweight design that allows you to connect all the pieces together into a single, easy to transport case. The internal 2 x 150 watt Class D power amplifier produces a clean and powerful stereo sound. The system’s speakers are 2-way vented enclosures with heavy-duty 8-inch woofers for deep bass. These are complemented by a 1-inch titanium tweeter set in a custom horn with a 60° x 90° coverage pattern. The 8-channel mixer features4 mic/line as well as 2 stereo inputs, and can be removed from the speaker for tabletop use. The Expedition 510i (XP510i) is an all-in-one portable PA system that offers outstanding power and convenience. The pro-level performance of the XP510i begins with a pair of dual 2-way speakers with 10-inch woofers, complemented by a 1-inch titanium tweeter in a 60° x 90° horn. These speakers will provide dynamic low-end qualities and broad dispersion in any performance space. The XP510i features an internal 500 watt Class D powered mixer equipped with seven total mic/line and stereo inputs, phantom power, an integrated iPod dock, and ten studio- quality 24-bit digital effects to shape a customized sound for each and every performance. In addition, the speakers, mixer, and integrated 1 3/8-inch speaker stand mounts can be transported as a single compact bundle that weighs just over 50 pounds. XP308I List $679.99 $499.00 XP308i XP510I List $949.99 $699.00 Samson XP40i and XP40iw Portable Behringer PA Systems EUROPORT The Samson Expedition EPA40 Portable 40i (XP40i) portable PA PA System system employs a 6-inch woofer and a 1-inch high The EUROPORT EPA40 frequency driver to deliver portable PA system pristine, full-range sound. excels at public address It features a 40-watt Class applications, projecting D amplifier that is perfectly XP40i to a crowd of up to matched to the driver for high efficiency and low current draw. An internal iPod 100 people while dock with level control also gives you the option of incorporating songs or other conveniently strapped MP3s into your performance. Plus, with bass and treble control you can tweak your on your shoulder. It sound to appropriately match your specific setting and audience. A rechargeable features a 5" full-range loudspeaker with 40 Watts of power, an integrated battery battery provides the XP40i with absolute mobility. In addition, a 1/4-inch link in/out pack for 8 hours of continuous operation, Mic and Aux inputs as well as a high-quality jack allows for linking two systems together to create a stereo setup. Lastly, as this dynamic microphone and accessories such as charger and cables. stand-mountable PA is also extremely lightweight, it enhances the portability of the EPA40 List $217.99 $108.99 system. The XP40i even has a convenient integral top handle for easier transport. The XP40iw includes a built-in VHF wireless microphone system (microphone included) that's ideal for any number of vocal applications. Mackie SRM150 XP40I List $294.99 $219.00 150-Watt XP40IW List $399.99 $299.00 PA System This ultra-compact PA system Behringer EUROLIVE B205D features a 150-watt amplifier Active PA/Monitor System for loud sound, a 5.25" full range, weather-resistant This active PA loudspeaker boasts Class-D neodymium driver, and amplifier technology and an internal a built-in three-channel switch-mode power supply to deliver mixer with two combo XLR/ high-fidelity sound in a lightweight line inputs (with true 48V (7 lbs!) package. It pumps 150 watts phantom power). In addition, through a 5.25" premium-quality, full- you get a stereo channel for range neodymium driver, and features a CD/MP3 players, and a powerful 3-band Active EQ. It’s perfect for small venues, or 3-channel mixer with 3-band EQ, as well taking along with you as your personal PA system. Only 8x11 inches, and weighs less as two Mic Preamps with phantom power, than 8 lbs! one instrument-ready input plus much more. SRM150 List $389.99 $299.99 B205D List $393.99 $196.99 BSW Sells Gator GPA720 Rolling PA Mixer Case The Gear That Fits PA mixers such as the Behringer PMP2000 or Mackie PPM608.
Load more

Recommended publications
  • Subwoofer Arrays: a Practical Guide
    Subwoofer Arrays A Practical Guide VVVeVeeerrrrssssiiiioooonnnn 111 EEElEllleeeeccccttttrrrroooo----VVVVooooiiiicccceeee,,,, BBBuBuuurrrrnnnnssssvvvviiiilllllleeee,,,, MMMiMiiinnnnnneeeessssoooottttaaaa,,,, UUUSUSSSAAAA AAApAppprrrriiiillll,,,, 22202000009999 © Bosch Security Systems Inc. Subwoofer Arrays A Practical Guide Jeff Berryman Rev. 1 / June 7, 2010 TABLE OF CONTENTS 1. Introduction .......................................................................................................................................................1 2. Acoustical Concepts.......................................................................................................................................2 2.1. Wavelength ..........................................................................................................................................2 2.2. Basic Directivity Rule .........................................................................................................................2 2.3. Horizontal-Vertical Independence...................................................................................................3 2.4. Multiple Sources and Lobing ...........................................................................................................3 2.5. Beamforming........................................................................................................................................5 3. Gain Shading....................................................................................................................................................6
    [Show full text]
  • Rsxpassive Loudspeakers
    RSX PASSIVE LOUDSPEAKERS RSX110 RSX112 RSX118S RSX115 RSX215 OWNER'S MANUAL Copyright 2013, Samson Technologies Corp. v2.2 Samson Technologies Corp. 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.com Speakon® is a registered trademark of Neutrik AG Safety Instructions WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or mois- ture. To reduce the hazard of electrical shock, do not remove cover or back. No user serviceable parts inside. Please refer all servicing to qualified personnel. The lightning flash with an arrow- head symbol within an equilateral triangle, is intended to alert the user to the presence of unin- sulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Important Safety Instructions 1. Please read all instructions before operating the unit. 2. Keep these instructions for future reference. 3. Please heed all safety warnings. 4. Follow manufacturers instructions. 5. Do not use this unit near water or moisture. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
    [Show full text]
  • The M&K Sound Technology Handbook
    ® ® The M&K Sound Technology Handbook www.mksound.com Rev. 2 · 2016 Rev. Contents TThe Legend Lives On . .3 The Vision and the Mission. 4 M&K In The Professional Audio World . .5 The M&K Sound Advantage. 6 M&K Sound History. 9 Satellite-Subwoofer Concept. 10 Satellite Advantages . 11 Phase-Focused Crossovers . 12 Satellite Cabinets. 13 Exclusive Tripole Surrounds . 14 MX Subwoofer Technology . 17 Sealed Box vs. Vented . 19 Push-Pull Deep Bass. .20 No Servo Feedback. .22 Installing M&K Sound Subwoofers . 23 Deep Bass Subwoofer Drivers and Amplifiers. 25 M&K Sound Subwoofer Q and Low-Pass Filters. .26 Using Multiple Subwoofers . 27 Home Cinema Setup . 28 2 The Legend Lives On Aimed at music recording, post production and broadcast applications, M&K Sound Professional loudspeaker systems have been used by the world’s leading recording engineers, mixers, sound designers, editors and music composers for more than 35 years. M&K Sound Professional speakers are designed as essential creative tools for mixing engineers and artists to let them do their job easier, faster and better with no unpleasant surprises along the way to a perfect mix that will translate seamlessly between studio, cinema and home. Created for state-of-the-art recording/mixing studios, M&K Sound Professional Systems are ideal for a wide range of demanding and critical audio applications, including near-field music composition, recording and mixing, sound design, broadcast monitoring, voice-over booths and quality control. Throughout our storied history, M&K Sound’s uncompromising products have consistently broken down barriers between pro and consumer audio with loudspeakers that shed clear, natural daylight on any recording, regardless of source (analog or digital), format (two-channel or multi-channel), playback environment (studio or domestic) or application (movies or music).
    [Show full text]
  • Public Address System
    Hkkjr ljdkj &GOVERNMENT OF INDIA jsy ea=ky;& MINISTRY OF RAILWAYS ¼dk;kZy;hu iz;ksx gsrq½& (For official use only) MAINTENANCE HANDBOOK ON PUBLIC ADDRESS SYSTEM CAMTECH/S/PROJ/12‐13/HB‐PA/1.0 December 2012 MAHARAJPUR, GWALIOR – 474 005 CONTENTS Sr. No. Description Page No. 1. Introduction 1 2. Acoustic 2 3. Microphones 7 4. Loudspeaker 16 5. Amplifier 24 6. Audio Mixer Pre-Amplifier 37 7. Coference System 40 8. Maintenance 47 9. Wiring and Cabling 49 10. Earthing and other Safety Precautions 51 11. PA System at Railway Stations 53 12. Fault Finding 55 13. Precautions 58 ISSUE OF CORRECTION SLIPS The correction slips to be issued in future for this handbook will be numbered as follows: CAMTECH/S/PROJ/2012-13/HB-PA/1.0/C.S.# XX date-------------------------------- Where “XX” is the serial number of the concerned correction slip (starting from 01 onwards) CORRECTION SLIPS ISSUED Sr. No. of Date of Page No. and Item no. Remarks Corr. Slip issue modified CAMTECH/S/PROJ/12‐13/HB‐PA/1.0 1 PUBLIC ADDRESS SYSTEM 1. Introduction Public Address System (PA system) is an electronic sound amplification and distribution system with a microphone, amplifier and loudspeakers, used to allow a person to address a large public, for example for announcements of movements at large and noisy air and rail terminals. The simplest PA system consist of a microphone, an amplifier, and one or more loudspeakers is shown in fig 1. A sound source such as compact disc player or radio may be connected to a PA system so that music can be played through the system.
    [Show full text]
  • The Legend of EL PIPE-O
    The Legend of EL PIPE-O By Kent English and Nelson Pass, (c) 2002 Pass Labs Intro is used to damp out this uncontrolled motion and turn it to getting a little more bass out of the speaker. The two Most woofers just don’t quite do the lowest octave. You most popular approaches are the bass-reflex enclosure read the specs that say “usable response: 20 Hz – 20 and the transmission line. KHz” and you know that the 20 Hz part of it is wildly optimistic. Achieving very low frequencies at reasonable The bass-reflex enclosure has the woofer mounted in a power levels is not an easy job; the acoustic impedance box that has a specific internal volume and an opening experienced by a speaker cone declines as the inverse to the outside. Any box with an opening has its own of the square of the frequency. As a practical matter, acoustic resonance, known as Helmholtz resonance, woofers and their enclosures need to be very large to which you experience when you blow into the opening properly reproduce the lowest octave. Even when of a beer bottle. Varying the volume of the box or you compensate with frequency equalization and more the size of the opening (called the port) adjusts the amplifier power, the performance suffers as you reach frequency of resonance, and you can tune it to the same the excursion and power handling limitations of a small frequency as the resonance of the woofer. cone in a small box. When the box’s resonance is the same as the woofer’s Let’s face it.
    [Show full text]
  • The Study on the Woofer Speaker Characteristics Due to Design Parameters
    The study on the woofer speaker characteristics due to design parameters Byoung-sam Kim1; Jin-young Park2; Xu Yang3; Tae-keun Lee4; Hongtu Sun5 1 Wonkwang University, South Korea 2 Wonkwang University, South Korea 3 Wonkwang University, South Korea 4 Daeduk College, South Korea 5 Ludong University, China ABSTRACT In the vehicle speaker, because the sound characteristics are changed by the space of vehicle which mount the speaker, the speaker elements should be determined according to sound field. In this study, the nonlinear characteristics, the frequency response and the sound pressure for the same size speakers which is adapted to domestic vehicle model are investigated. The vehicle model is classified to semi-midsize, midsized, full size vehicle in order to change the vehicle space. As a result, we can investigate the differences of the force factor and the stiffness of suspension system for speaker. According to the change of the speaker characteristics, the sound pressure is changed, also. In the future, these data will be used to investigate the correlation between the sound quality and measurement data. Keywords: Woofer speaker, Force factor, Stiffness of suspension system, Mechanical mass of moving system, Resonant frequency I-INCE Classification of Subjects Number(s): 76.9 1. INTRODUCTION The speaker is conversion device from electrical energy to acoustical energy like a sound. The speaker sound level is appear differently depending on strength of electric current and signal frequency, loudness is determined to depend on displacement of diaphragm inside the speaker. Speaker can be classified as a Cone type, Dome type, Flat type, Ribbon type, Horn type, Micro speaker and etc.
    [Show full text]
  • W371A SAM Woofer System Operating Manual
    W371A SAM Woofer System Operating Manual Introduction Thank you for choosing Genelec! Fulfilling dreams by offering people the most truthful sound reproduction possible has been the source of our enthusiasm since 1978. There ́s already over one million Genelec monitors around the world - welcome to our story! Genelec monitors are designed to last. They are hand-built in Iisalmi, Finland, using certified sustainable methods. They are individually tested and calibrated and have long support for spare parts. They are designed for low power consumption, in use and during automatic standby. Please register your monitor at Closed box http://www.community. genelec.com/. woofer system By registering you receive an extended three-year warranty for spare parts in addition of the standard two-year warranty for parts and labour. For more information about our service and technical support, please visit http://www.genelec.com/customer-service. System Characteristics The Genelec W371A is an advanced low frequency loudspeaker system with novel signal processing enabling variable acoustic Reflex box radiation of low-frequency audio. woofer system The W371A is suitable for professional monitoring applications calling for very high acoustic precision and reliability. They combine with The Ones monitors, offering many remarkable Genelec technologies to provide point source audio benefits with directivity control over an extraordinarily wide audio bandwidth. The W371A offers steerable acoustic directivity at low Figure 1. The W371A construction with a 8351B
    [Show full text]
  • Jbl Professional Enclosure Guide
    JBL PROFESSIONAL ENCLOSURE GUIDE 1For single 2202, 2220, E120 or G125 used as midrange or for guitar. 2 For single 2204, 2206 used as general purpose low-end or MI bass 3 For single 128H hi-fi low-end or small subwoofer. 4 For single 2220, E130, or G135 used full-range or for MI bass. 5 For single LE8T-H used full range (flat, down to 30 Hz). 6 For single 2205, 2225, 2226, 2227, E140, E145, or G135 for general purpose low-end. 7 For double 2204, 2206 used as general purpose low-end or MI bass. 8 For single 2234, 2235, 2215/LE15 used as hi-fi low-end or subwoofer. 9 For single E155 in smallest box for bass guitar. 10 For double 2225, (2205), 2226, E145, E140 or G135 for general purpose low-end. 11 For single 2245 subwoofer. 12 For double 2245 subwoofer. 13 For single 2241 or 2242 subwoofer. Note: All Dimensions are in inches and cubic feet Enclosure Inside Dimensions Enclosure Tuned Vent Area Equivalent Length Chart # Volume Frequency Height (in.) Width (in.) Depth (in.) (square duct tube (in.) (cubic feet) (Hz) inches) and ID 1 1.5 80 17.4 14.2 12.3 13.9 (1) 4.2 (3/4") 2 2.0 40 18.9 15.4 13.4 12.6 (1) 4.0 7.6 3 2.5 30 20.2 16.5 14.3 12.6 (1) 4.0 11.9 4 3.0 40 21.4 17.5 15.1 12.6 (1} 4.0 4.0 5 3.4 32 22.1 18.0 15.6 12.6 (1) 4.0 6.8 6 4.0 40 23.6 19,2 16.7 25.1 (2) 4.0 6.5 7 4.0 40 25.0 18.0 17.4 25.1 (2) 4.0 6.5 8 5.0 30 25.3 20.7 17.9 25.1 (2) 4.0 11.0 9 6.0 40 27.0 22.0 19.1 50.3 (4) 4.0 8'.2 l0 8.0 40 32.0 24.0 19.4 50.3 (4) 4.0 5.0 11 10.0 30 32.0 26.1 22.6 75.4 (6) 4.0 15.2 12 20.0 30 40.2 32.8 28.4 150.8 (3) 8.0 12.5 13 10.0 40 32.0 26.1 22.6 75.4 (6) 4.0 5.5 *Box Dimensions are in inches Note: Models 2118, 2123 and El10 used for midrange, require only a small, sealed sub-chamber of approximately 0.4 cubic foot net internal volume.
    [Show full text]
  • Us Msrp Pricing 2020 About Us
    US MSRP PRICING 2020 ABOUT US Stealth Acoustics invisible loudspeakers are always assembled by hand for ultimate care and quality control. Stealth Acoustics is a division of Dimensional Communications, Inc., a premier systems integration company based in Mount Vernon, WA USA for over 45 years. Stealth's quality products are hand made in the USA with a focus on reliability, high performance and minimal aesthetic impact. Nowhere is this focus more evident than in the completely unique, patented Invisible Speakers and Subwoofers, and throughout the full line of outdoor audio and video products. Each speaker is tested extensively WARRANTY EXTENDED 15-YEAR INVISIBLE SPEAKER WARRANTY not covered. Since the condition of use is beyond the repair or replacement of the CoverArt™. Removal our control, the user and/or installer assumes all and installation is not covered. Since the condition of Stealth Acoustic offers a limited 15 year risk. The installer is responsible for proper use, use is beyond our control, the user and/or installer extended warranty covering the removal and preparation and placement of materials, bonding assumes all risk. The installer is responsible for re-installation of defective Invisible Speaker to any substrate. proper use, preparation, and placement of materials. products. Requires project registration and acceptance by Stealth Acoustics. Subject to STANDARD 2-YEAR ELECTRONICS WARRANTY STANDARD 1/2/5-YEAR PATIO THEATER™ WARRANTY terms of the Limited 15 Year Warranty Statement. Each Stealth amplifier is covered against defects in Each Stealth Patio Theater is covered against Invisible Speaker extended warranty form must manufacturing under manufacturer’s warranty for a defects under manufacturers warranty for a be submitted with purchase order (see last page period of 2 years.
    [Show full text]
  • Current-Driving of Loudspeakers
    IV First Edition 2010 Copyright © 2010 Esa T. Meriläinen All rights reserved Homepage: www.current-drive.info ISBN: 1450544002 EAN-13: 9781450544009 Published in the U.S.A. through a print-on-demand service While every precaution has been taken to ensure the accuracy of infor- mation presented herein, the author and publisher assume no responsi- bility for errors or omissions. Nor is any liability assumed for any pos- sible damages or losses arising from the use of this information. 1 SOME PARALLELS 1.1 The Era of Direct Current The issue whether loudspeakers should be excited by a voltage or current signal is quite well comparable to a dispute that took place over a century ago, concerning whether the production and distribution of electricity should operate on direct or alternating current. Thomas A. Edison had opened, in New York, the world's first power generating plant, that supplied a DC voltage of 110 volts for an area of a few square kilometres in Manhattan. Another pioneer of electrical tech- nology, Croatian-born Nikola Tesla, instead, believed strongly in the su- periority of the three-phase AC system he had developed. In 1886, George Westinghouse founded an electric company to utilize the inven- tions and patents of Tesla and to compete with Edison. Edison was not at all pleased seeing a rivaling system threatening his dominating stature in power production. The conflict caused a breach between Edison and Tesla, and a public struggle about which system would become prevalent. Edison even resorted to a trick campaign in his attempt to defame AC power, that he thought was dangerous.
    [Show full text]
  • Federal Signal Public Address
    FEDERAL SIGNAL CORPORATION Public Address High-Powered Amplifiers Models CTS600, CTS1200, CTS2000, CTS3000 The Federal Signal line of high-powered audio amplifiers provides the flexibility, quality, and performance required in an industrial public address system. AudioMaster® amplifiers are available in four PUBLIC ADDRESS FOR different power ratings from 600 watt to 3000 watt. Each output INDUSTRIAL ENVIRONMENTS channel can be independently configured to drive either the step- down transformers in a distributed “constant-voltage” loudspeaker system (70-volt mode) or a system of loudspeakers that do not • Available in power ratings of 600, require step-down transformers (8/4 ohm mode). Additionally, the 1200, 2000, and 3000 watt Models CTS2000 and CTS3000 can operate in 100-volt mode. The 70-volt and 100-volt outputs eliminate the need for step-up trans- • Two channels formers, which can create distortion and cause insertion loss. • Selectable dual or mono modes The quality of AudioMaster amplifiers is apparent in the noise-free, crystal clear highs and lows they reproduce. The grounded bridge • In-rush limiting design of the CTS series provides for less distortion and thermal • Energy efficient stress, and a simpler, more reliable power supply than found in typical stepped “linear” output systems. • Integrated coding system AudioMaster amplifiers consume significantly less power per watt • Dual input sensitivity switches than typical central amplifiers and reduce long term operating costs. A unique soft-start circuit and a four second pseudo- • ETL Listed random turn-on delay minimizes inrush currents and eliminates the need for power sequencers. When combined with the AudioMaster AudioRouter and the complete line of AudioMaster Speakers, these high-powered ampli- fiers are a key component in a high performance, industrial public address system.
    [Show full text]
  • Test Reports
    TEST REPORTS 50 watts per channel and is rated as having a power -handling capability of 50 watts with musical program materi- al. Its frequency response is specified as 78 Hz to 20 kHz ±3 dB, with bass response down 6 dB at 68 Hz. The CS135 subwoofer resembles most subwoofers designed specifically for operation in a three-piece system. Like the satellite speakers, it is a black box, though clearly much larger and weighing 21 pounds. Internally, the CS135 is a dual -chamber design, com- bining a 10 -liter sealed enclosure with a 12 -liter vented enclosure that opens into the room through a duct 33/4 inches in diameter. The CS135 contains a single 8 -inch woofer with a dual voice coil, driven at low frequencies by both stereo chan- nels and generating an L + R (mono) bass output. The CS135 contains the crossover to the satellites, set at 112 Hz with a 12 -dB -per -octave low-pass section feeding bass to the subwoofer and 6 -dB -per -octave high-pass filters supplying middle and high frequencies to the satellites. Celestion specifies the subwoofer's impedance as 8 ohms and its sensitiv- ity as 86 dB SPL at 1 meter (matching Celegion Trinity Three -Piece that of the satellites). Its rated band- width is 42 to 112 Hz at the -3 -dB points and 38 to 143 Hz at -6 dB. Loudspeaker System Celestion says the CS135 is suitable JULIAN HIRSCH HIRSCH-HOUCK LABORATORIES for use with amplifiers rated between 10 and 90 watts per channel. The CS135 connects to the left and IHECelestion Trinity is a modestly The Celestion 1 is specified as hav- right speaker outputs of the amplifier priced three-piece speaker sys- ing a nominal impedance of 8 ohms feeding the system and to the inputs of tem consisting of a pair of Celes- and a sensitivity of 86 dB sound -pres- the two satellites.
    [Show full text]