Architect Series® Traditional Awning Window

Product Selection Guide Sound Transmission Class/Outdoor-Indoor Transmission Class...... AW-2 Size and Performance Data...... AW-2 Features and Options...... AW-3 Combination Assemblies...... AW-4 Glazing Performance...... AW-5 Products with Impact-Resistant Glass ...... AW-10 Grille Types Grille Profiles...... AW-11 Typical Grille Patterns...... AW-12 Size Tables Awning...... AW-13 Large Awning...... AW-14 Design Data Awning...... AW-15 Large Awning...... AW-16 Detailed Product Descriptions Clad...... AW-17 Wood...... AW-18 Unit Sections Wood Collection...... AW-19 Clad...... AW-20 Wood...... AW-21 Large Awning—Clad...... AW-22 Large Awning—Wood...... AW-23 Supporting documents for this product: Test Reports: https://media.pella.com/professional/adm/CertificationReports/Test_Reports_AS-Clad.pdf CSI Specs (readable using Microsoft Word or other text editing application): https://media.pella.com/professional/adm/Wood-CSI_Specs/08551.rtf AIA Masterspec (readable using Microsoft Word or other text editing application): https://media.pella.com/professional/adm/Wood-CSI_Specs/Masterspec/085200_fl.doc Detailed Product Description (readable using Microsoft Word or other text editing application): https://media.pella.com/professional/adm/Clad-Wood/AST-AW-C.rtf Size Tables (requires appropriate CAD software to read and use): https://media.pella.com/professional/adm/Clad-Wood/ASCAWE_D.dwg CAD cross sections (requires appropriate CAD software to read and use): https://media.pella.com/professional/adm/Clad-Wood/ASCAW3a_D.dwg 3D & BIM (requires appropriate software to read and use): https://media.pella.com/professional/adm/RevitFiles/AS-Revit/Window-Awning-Pella-Architect_Series.zip Sketchup (requires appropriate software to read and use): https://media.pella.com/professional/adm/Clad-Wood/PellaSKP_ArchitectSeries_Traditional_Awning.zip Combination Recommendations: https://media.pella.com/professional/adm/Clad-Wood/D_Combinations.pdf Installation Details: https://media.pella.com/professional/adm/Clad-Wood/F_InstallationDetails.pdf

The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. Microsoft and Microsoft Word are registered trademarks of Microsoft Corp.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-1 Architect Series® Traditional Awning Window

Size and Performance Data

Awning Clad Wood Sizes Standard vent / fixed sizes l l Special sizes available l l

Performance 1 CW40 – CW50 CW40 – CW50 Meets or Exceeds AAMA / WDMA Ratings Hallmark Certified Hallmark Certified Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05 Water Resistance 7.5 psf 7.5 psf Design Pressure 40-50 psf 40-50 psf LC+60/-60 – LC+75/-85 Products with Impact‑Resistant Glass — Hallmark Certified Other Performance Criteria

Forced Entry Resistance Level (Minimum Security Grade) 2 10 10 Large Awning Sizes Standard Vent Sizes l l Special Sizes Available l l

Performance 1 LC40 LC40 Meets or Exceeds AAMA / WDMA Ratings Hallmark Certified Hallmark Certified Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05 Water Resistance 7.5 psf 7.5 psf Design Pressure 40 psf 40 psf LC+60/-60 – LC+75/-85 Products with Impact‑Resistant Glass — Hallmark Certified Other Performance Criteria

Forced Entry Resistance Level (Minimum Security Grade) 2 10 10

Operating Force (lb) Initiate Motion / Maintain Motion (of Hallmark tested size and glazing) 4 15 / 6 15 / 6

Sound Transmission Class / Outdoor-Indoor Transmission Class Glazing System Frame Size Overall Exterior Interior STC OITC Product Third Pane Tested 3 Glazing Glass Glass Rating Rating Thickness Thickness Thickness Thickness Architect Series Clad Vent with Integral Grilles Window 53" x 29" 11/16" 2.5mm 2.5mm — 27 24 59" x 23" 11/16" 5mm 3mm — 33 29 Vent with Removable or No Grilles 53" x 29" 11/16" 2.5mm 2.5mm — 27 23 59" x 23" 11/16" 5mm 3mm — 32 27 59" x 23" 11/16" 3mm 6.0mm PVB — 33 28 Fixed with Integral Grilles 47" x 59" 11/16" 3mm 3mm — 30 27 Fixed with Removable or No Grilles 47" x 59" 11/16" 3mm 3mm — 29 24 47" x 59" 11/16" 5mm 3mm — 31 27 47" x 59" 11/16" 3mm 6.0mm PVB — 32 28 Architect Series Clad Vent with Removable or No Grilles Window with 59" x 23" 11/16" 3mm 7.6mm PVB — 35 30 Impact-Resistant Glass 53" x 29" 1" 5mm 10.1mm SGP — 35 31 Fixed with Removable or No Grilles 47" x 59" 11/16" 3mm 7.6mm PVB — 33 29 53" x 53" 1" 5mm 10.1mm SGP — 35 30

(—) = Not Available (3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are (1) Maximum performance for single unit when glazed with the appropriate glass thickness. representative of all sizes of the same configuration. See Design Data pages in this section for specific product performance class and grade values. (4) Glazing configurations may result in higher operational forces. Values shown are for standard and special sizes; Custom sizes may not have the same values. NOTE: Performance with additional options may not be the same as Standard and Special size Contact your local sales representative for complete information. units. Please contact your local Pella representative for complete information. (2) The higher the level, the greater the product’s ability to resist forced entry. rev. 08/06/21 Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-2 Architect Series® Traditional Awning Window

Features and Options

Standard Options / Upgrades Glazing Glazing Type Dual-Pane Insulating Glass Triple-Pane Insulating Glass Insulated Glass Options/Low-E Types SunDefense™ Low-E AdvancedComfort Low-E Advanced Low-E NaturalSun Low-E Clear (no Low-E coating) Additional Glass Options Tempered Glass

Obscure Glass 1 Annealed Glass Low-E Tinted Glass (Bronze, Gray and Green) Non-Impact Laminated Dual-Pane Insulating Glass Impact-Resistant Glass (Laminated Dual-Pane Insulating Glass) Gas Fill/High Altitude

Krypton 2 Argon High altitude

High Altitude with Argon 3 Wood types Pine Mahogany, Douglas Fir Exterior EnduraClad Plus protective finish EnduraClad– protective finish Factory Primed Pine wood exterior Unfinished Mahogany wood exterior

Cladding Colors 1 Standard colors Custom Colors Interior

Unfinished Wood Factory primed 4 , Factory prefinished paint 4, Factory prefinished stain Hardware Hardware Finish Bright Brass, Satin Nickel, Oil‑Rubbed Bronze, Antique Brass, Distressed Bronze, Distressed Champagne, White, Brown or Matte Black Nickel Sash Locks

SureLock® System, Unison Lock System 5 — Hinging Awning—Stainless Steel — Large Awning—Wash Hinge — Impact-Resistant—Wash Hinge — Grilles Integral Light Technology® Grilles — Traditional, Prairie, Top Row, Cross, New England, Victorian, Simulated French, Custom Roomside Removable Grilles — Traditional, Prairie, Top Row, Cross, New England, Victorian, Custom Grilles-Between-the-Glass

— Traditional, Prairie, Top Row 1, Cross or Custom-Equally Divided Screens — InView™ screens, Vivid View® screens

(1) Contact your local Pella sales representative for current designs and color options. (2) Only available with Triple-Pane glazing, not available with high altitude glazing. (3) Available with Low-E argon-insulated glass only. (4) Not available on Mahogany and Douglas Fir interiors. (5) Unit height determines availability.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-3 Architect Series® Traditional Awning Window

Combinations

Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion. Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Go to www.Pella.com for typical combinations and requirements and limitations related to mulling various combinations. Contact your local Pella sales representative for more information.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-4 Architect Series® Traditional Awning Window

Glazing Performance - Total Unit

Glass Shaded Areas Meet ENERGY STAR® Performance Values 1 (mm) Performance Criteria in Zones Shown NFRC Certified Gap Type of Glazing Product # Fill U. S. Canada 2 Glazing

Thickness Ext. Int. CR VLT

SHGC Zone ER Zone U-Factor Vent Dual-Pane Glazing Awning and Large Awning - Aluminum-Clad Exterior N NC SC S CA 11/16" Clear IG PEL-N-30-13234-00001 3 3 Air 0.45 0.53 0.56 44 with grilles-between-the-glass PEL-N-30-13431-00001 0.44 0.49 0.51 44 with integral grilles PEL-N-30-13438-00001 0.44 0.49 0.51 44 11/16" Advanced Low-E IG PEL-N-30-13229-00002 3 3 Argon 0.28 0.26 0.48 61 NC with grilles-between-the-glass PEL-N-30-13423-00002 0.28 0.23 0.43 61 NC SC S with integral grilles PEL-N-30-13426-00002 0.29 0.23 0.43 61 NC SC S 11/16" SunDefense™ Low-E IG PEL-N-30-13230-00002 3 3 Argon 0.28 0.19 0.44 61 NC SC S with grilles-between-the-glass PEL-N-30-13424-00002 0.28 0.18 0.40 61 NC SC S with integral grilles PEL-N-30-13427-00002 0.28 0.18 0.40 61 NC SC S 11/16" AdvancedComfort Low-E IG PEL-N-30-13233-00001 3 3 Argon 0.25 0.25 0.47 47 N NC SC S with grilles-between-the-glass PEL-N-30-13430-00001 0.25 0.23 0.42 47 N NC SC S with integral grilles PEL-N-30-13437-00001 0.27 0.23 0.42 47 N NC SC S 11/16" NaturalSun Low-E IG PEL-N-30-13231-00002 3 3 Argon 0.29 0.47 0.54 61 N with grilles-between-the-glass PEL-N-30-13425-00002 0.29 0.43 0.49 60 N with integral grilles PEL-N-30-13428-00002 0.29 0.43 0.49 60 N Tinted Glazing 11/16" Bronze Advanced Low-E IG PEL-N-30-13271-00001 5 3 Argon 0.29 0.23 0.31 59 NC SC S with grilles-between-the-glass PEL-N-30-13507-00001 0.30 0.21 0.28 59 NC SC S with integral grilles PEL-N-30-13513-00001 0.30 0.21 0.28 59 NC SC S 11/16" Gray Advanced Low-E IG PEL-N-30-13272-00001 5 3 Argon 0.29 0.21 0.26 59 NC SC S with grilles-between-the-glass PEL-N-30-13508-00001 0.30 0.19 0.24 59 NC SC S with integral grilles PEL-N-30-13514-00001 0.30 0.19 0.24 59 NC SC S 11/16" Green Advanced Low-E IG PEL-N-30-13273-00001 5 3 Argon 0.29 0.26 0.42 59 NC with grilles-between-the-glass PEL-N-30-13509-00001 0.30 0.24 0.38 59 NC SC S with integral grilles PEL-N-30-13515-00001 0.30 0.24 0.38 59 NC SC S High Altitude Glazing 11/16" Advanced Low-E IG PEL-N-30-13235-00001 3 3 Air 0.32 0.26 0.48 55 with grilles-between-the-glass PEL-N-30-13432-00001 0.32 0.24 0.43 55 S with integral grilles PEL-N-30-13439-00001 0.32 0.24 0.43 55 S 11/16" SunDefense Low-E IG PEL-N-30-13236-00001 3 3 Air 0.31 0.20 0.44 56 S with grilles-between-the-glass PEL-N-30-13433-00001 0.32 0.18 0.40 56 S with integral grilles PEL-N-30-13440-00001 0.32 0.18 0.40 56 S 11/16" AdvancedComfort Low-E IG PEL-N-30-13238-00001 3 3 Air 0.28 0.25 0.47 43 NC SC S with grilles-between-the-glass PEL-N-30-13435-00001 0.28 0.23 0.42 43 NC SC S with integral grilles PEL-N-30-13442-00001 0.29 0.23 0.42 43 NC SC S 11/16" NaturalSun Low-E IG PEL-N-30-13237-00001 3 3 Air 0.32 0.47 0.54 55 with grilles-between-the-glass PEL-N-30-13434-00001 0.33 0.43 0.49 55 with integral grilles PEL-N-30-13441-00001 0.33 0.43 0.49 55

R-Value = 1/U-Factor Climate Zones SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating CA

(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative. Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-5 Architect Series® Traditional Awning Window

Glazing Performance - Total Unit

Glass Shaded Areas Meet ENERGY STAR® Performance Values 1 (mm) Performance Criteria in Zones Shown NFRC Certified Gap Type of Glazing Product # Fill U. S. Canada 2

Glazing Ext. Mid Int. Thickness CR VLT

SHGC Zone ER Zone U-Factor Vent Triple-Pane Glazing Awning and Large Awning - Aluminum-Clad Exterior N NC SC S CA 1" Advanced Low-E IG PEL-N-30-13314-00001 3 3 3 Argon 0.22 0.23 0.42 71 N NC SC S with grilles-between-the-glass PEL-N-30-13592-00001 0.22 0.21 0.38 72 N NC SC S with integral grilles PEL-N-30-13601-00001 0.22 0.21 0.38 72 N NC SC S 1" Advanced Low-E IG PEL-N-30-13320-00001 3 3 3 Krypton 0.19 0.23 0.42 75 N NC SC S 29 CA with grilles-between-the-glass PEL-N-30-13598-00001 0.19 0.21 0.38 75 N NC SC S 28 CA with integral grilles PEL-N-30-13607-00001 0.19 0.21 0.38 75 N NC SC S 28 CA 1" SunDefense™ Low-E IG PEL-N-30-13315-00001 3 3 3 Argon 0.22 0.17 0.39 72 N NC SC S with grilles-between-the-glass PEL-N-30-13593-00001 0.22 0.16 0.35 72 N NC SC S with integral grilles PEL-N-30-13602-00001 0.22 0.16 0.35 72 N NC SC S 1" SunDefense™ Low-E IG PEL-N-30-13321-00001 3 3 3 Krypton 0.19 0.17 0.39 75 N NC SC S 26 CA with grilles-between-the-glass PEL-N-30-13599-00001 0.19 0.16 0.35 75 N NC SC S 25 CA with integral grilles PEL-N-30-13608-00001 0.19 0.16 0.35 75 N NC SC S 25 CA 1" NaturalSun Low-E IG PEL-N-30-13313-00001 3 3 3 Argon 0.22 0.39 0.47 71 N NC 34 CA with grilles-between-the-glass PEL-N-30-13591-00001 0.22 0.35 0.43 71 N NC with integral grilles PEL-N-30-13600-00001 0.22 0.35 0.43 71 N NC 1" NaturalSun Low-E IG PEL-N-30-13319-00001 3 3 3 Krypton 0.19 0.39 0.47 75 N NC 39 CA with grilles-between-the-glass PEL-N-30-13597-00001 0.19 0.35 0.43 75 N NC 35 CA with integral grilles PEL-N-30-13606-00001 0.19 0.35 0.43 75 N NC 35 CA High Altitude Glazing 1" Advanced Low-E IG PEL-N-30-13317-00001 3 3 3 Air 0.25 0.23 0.42 67 N NC SC S with grilles-between-the-glass PEL-N-30-13595-00001 0.25 0.21 0.38 67 N NC SC S with integral grilles PEL-N-30-13604-00001 0.25 0.21 0.38 67 N NC SC S 1" SunDefense Low-E IG PEL-N-30-13318-00001 3 3 3 Air 0.25 0.18 0.39 67 N NC SC S with grilles-between-the-glass PEL-N-30-13596-00001 0.25 0.16 0.35 67 N NC SC S with integral grilles PEL-N-30-13605-00001 0.25 0.16 0.35 67 N NC SC S 1" NaturalSun Low-E IG PEL-N-30-13316-00001 3 3 3 Air 0.26 0.39 0.47 67 N NC with grilles-between-the-glass PEL-N-30-13594-00001 0.26 0.35 0.43 67 N NC with integral grilles PEL-N-30-13603-00001 0.26 0.35 0.43 67 N NC

R-Value = 1/U-Factor Climate Zones SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating CA

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-6 Architect Series® Traditional Awning Window

Glazing Performance - Total Unit

Glass Shaded Areas Meet ENERGY STAR® Performance Values 1 (mm) Performance Criteria in Zones Shown NFRC Certified Gap Type of Glazing Product # Fill U. S. Canada 2

Glazing Ext. Int. Thickness CR VLT

SHGC Zone ER Zone U-Factor Vent Dual-Pane Glazing Awning and Large Awning - Wood Exterior N NC SC S CA 11/16" Clear IG PEL-N-40-07620-00001 3 3 air 0.43 0.54 0.56 44 with integral grilles PEL-N-40-07824-00001 0.43 0.49 0.51 44 11/16" Advanced Low-E IG PEL-N-40-07615-00002 3 3 Argon 0.27 0.26 0.48 61 N NC with integral grilles PEL-N-40-07812-00002 0.27 0.24 0.43 61 N NC SC S 11/16" SunDefense™ Low-E IG PEL-N-40-07616-00002 3 3 Argon 0.26 0.19 0.44 61 N NC SC S with integral grilles PEL-N-40-07813-00002 0.27 0.18 0.4 61 N NC SC S 11/16" AdvancedComfort Low-E IG PEL-N-40-07619-00001 3 3 Argon 0.24 0.25 0.47 48 N NC SC S with integral grilles PEL-N-40-07823-00001 0.25 0.23 0.42 47 N NC SC S 11/16" NaturalSun Low-E IG PEL-N-40-07617-00002 3 3 Argon 0.28 0.47 0.54 61 N with integral grilles PEL-N-40-07814-00002 0.28 0.43 0.49 61 N TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N-40-07657-00001 5 3 Argon 0.28 0.23 0.31 59 NC SC S with integral grilles PEL-N-40-07899-00001 0.29 0.21 0.28 59 NC SC S 11/16" Gray Advanced Low-E IG PEL-N-40-07658-00001 5 3 Argon 0.28 0.21 0.27 59 NC SC S with integral grilles PEL-N-40-07900-00001 0.29 0.19 0.24 59 NC SC S 11/16" Green Advanced Low-E IG PEL-N-40-07659-00001 5 3 Argon 0.28 0.26 0.42 59 NC with integral grilles PEL-N-40-07901-00001 0.29 0.24 0.38 59 NC SC S HIGH ALTITUDE GLAZING 11/16" Advanced Low-E IG PEL-N-40-07621-00001 3 3 Air 0.30 0.26 0.48 56 NC with integral grilles PEL-N-40-07825-00001 0.31 0.24 0.43 56 S 11/16" SunDefense Low-E IG PEL-N-40-07622-00001 3 3 Air 0.30 0.20 0.44 56 NC SC S with integral grilles PEL-N-40-07826-00001 0.31 0.18 0.4 56 S 11/16" AdvancedComfort Low-E IG PEL-N-40-07624-00001 3 3 Air 0.27 0.25 0.47 43 N NC SC S with integral grilles PEL-N-40-07828-00001 0.28 0.23 0.42 43 NC SC S 11/16" NaturalSun Low-E IG PEL-N-40-07623-00001 3 3 Air 0.31 0.47 0.54 56 with integral grilles PEL-N-40-07827-00001 0.32 0.43 0.49 56

R-Value = 1/U-Factor Climate Zones SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating CA

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-7 Architect Series® Traditional Awning Window

Glazing Performance - Total Unit

Glass Shaded Areas Meet ENERGY STAR® Performance Values 1 (mm) Performance Criteria in Zones Shown NFRC Certified Gap Type of Glazing Product # Fill U. S. Canada 2

Glazing Ext. Mid Int. Thickness CR VLT

SHGC Zone ER Zone U-Factor Vent Triple-Pane Glazing Awning and Large Awning - Wood Exterior N NC SC S CA 1" Advanced Low-E IG PEL-N-40-07700-00001 3 3 3 Argon 0.21 0.23 0.42 72 N NC SC S 27 CA with grilles-between-the-glass PEL-N-40-07978-00001 0.21 0.21 0.38 72 N NC SC S 26 CA with integral grilles PEL-N-40-07987-00001 0.21 0.21 0.38 72 N NC SC S 26 CA 1" Advanced Low-E IG PEL-N-40-07706-00001 3 3 3 Krypton 0.17 0.23 0.42 76 N NC SC S 31 CA with grilles-between-the-glass PEL-N-40-07984-00001 0.18 0.21 0.38 76 N NC SC S 30 CA with integral grilles PEL-N-40-07993-00001 0.18 0.21 0.38 76 N NC SC S 30 CA 1" SunDefense™ Low-E IG PEL-N-40-07701-00001 3 3 3 Argon 0.21 0.17 0.39 72 N NC SC S 24 CA with grilles-between-the-glass PEL-N-40-07979-00001 0.21 0.16 0.35 72 N NC SC S with integral grilles PEL-N-40-07988-00001 0.21 0.16 0.35 72 N NC SC S 1" SunDefense™ Low-E IG PEL-N-40-07707-00001 3 3 3 Krypton 0.17 0.17 0.39 77 N NC SC S 27 CA with grilles-between-the-glass PEL-N-40-07985-00001 0.17 0.16 0.35 77 N NC SC S 27 CA with integral grilles PEL-N-40-07994-00001 0.17 0.16 0.35 77 N NC SC S 27 CA 1" NaturalSun Low-E IG PEL-N-40-07699-00001 3 3 3 Argon 0.21 0.39 0.48 71 N NC 36 CA with grilles-between-the-glass PEL-N-40-07977-00001 0.21 0.35 0.43 71 N NC 34 CA with integral grilles PEL-N-40-07986-00001 0.21 0.35 0.43 71 N NC 34 CA 1" NaturalSun Low-E IG PEL-N-40-07705-00001 3 3 3 Krypton 0.18 0.39 0.48 76 N NC 40 CA with grilles-between-the-glass PEL-N-40-07983-00001 0.18 0.35 0.43 76 N NC 38 CA with integral grilles PEL-N-40-07992-00001 0.18 0.35 0.43 76 N NC 38 CA High Altitude Glazing 1" Advanced Low-E IG PEL-N-40-07703-00001 3 3 3 Air 0.24 0.24 0.42 67 N NC SC S with grilles-between-the-glass PEL-N-40-07981-00001 0.24 0.22 0.38 67 N NC SC S with integral grilles PEL-N-40-07990-00001 0.24 0.22 0.38 67 N NC SC S 1" SunDefense Low-E IG PEL-N-40-07704-00001 3 3 3 Air 0.24 0.18 0.39 68 N NC SC S with grilles-between-the-glass PEL-N-40-07982-00001 0.24 0.16 0.35 68 N NC SC S with integral grilles PEL-N-40-07991-00001 0.24 0.16 0.35 68 N NC SC S 1" NaturalSun Low-E IG PEL-N-40-07702-00001 3 3 3 Air 0.24 0.39 0.48 67 N NC with grilles-between-the-glass PEL-N-40-07980-00001 0.24 0.35 0.43 67 N NC with integral grilles PEL-N-40-07989-00001 0.24 0.35 0.43 67 N NC

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient Climate Zones VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating CA

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-8 Architect Series® Traditional Awning Window

Glazing Performance - Total Unit

Glass Shaded Areas Meet ENERGY STAR® Performance Values 1 (mm) Performance Criteria in Zones Shown NFRC Certified Gap Type of Glazing Product # Fill U. S. Canada 2

Glazing Ext. Int. Thickness CR VLT

SHGC Zone ER Zone U-Factor Laminated Impact-Resistant Glass N NC SC S CA 11/16" Clear PEL-N-30-13245-00001 3 8 Air 0.47 0.50 0.55 44 with grilles-between-the-glass PEL-N-30-13449-00001 0.47 0.46 0.5 44 with integral grilles PEL-N-30-13461-00001 0.47 0.46 0.5 44 11/16" Advanced Low-E IG PEL-N-30-13240-00001 3 8 Argon 0.33 0.26 0.47 54 with grilles-between-the-glass PEL-N-30-13444-00001 0.34 0.24 0.42 54 S with integral grilles PEL-N-30-13456-00001 0.34 0.24 0.42 54 S 11/16" SunDefense™ Low-E IG PEL-N-30-13241-00001 3 8 Argon 0.33 0.20 0.43 55 S with grilles-between-the-glass PEL-N-30-13445-00001 0.34 0.18 0.39 55 S with integral grilles PEL-N-30-13457-00001 0.34 0.18 0.39 55 S 1" Clear PEL-N-30-13377-00001 5 10 Air 0.43 0.48 0.53 45 with grilles-between-the-glass PEL-N-30-13673-00001 0.43 0.44 0.48 45 with integral grilles PEL-N-30-13697-00001 0.43 0.44 0.48 45 1" Advanced Low-E IG PEL-N-30-13369-00001 5 10 Argon 0.28 0.25 0.45 59 NC SC S with grilles-between-the-glass PEL-N-30-13665-00001 0.28 0.23 0.41 59 NC SC S with integral grilles PEL-N-30-13689-00001 0.28 0.23 0.41 59 NC SC S 1" SunDefense Low-E IG PEL-N-30-13370-00001 5 10 Argon 0.27 0.19 0.42 59 N NC SC S with grilles-between-the-glass PEL-N-30-13666-00001 0.28 0.18 0.38 59 NC SC S with integral grilles PEL-N-30-13690-00001 0.28 0.18 0.38 59 NC SC S Tinted Glazing Laminated Impact-Resistant 11/16" Bronze Advanced Low-E IG PEL-N-30-13242-00001 3 8 Argon 0.33 0.22 0.1 54 S with grilles-between-the-glass PEL-N-30-13446-00001 0.34 0.21 0.09 54 S with integral grilles PEL-N-30-13458-00001 0.34 0.21 0.09 54 S 1" Bronze IG PEL-N-30-13378-00001 5 10 Air 0.43 0.36 0.35 45 with grilles-between-the-glass PEL-N-30-13674-00001 0.43 0.32 0.31 45 with integral grilles PEL-N-30-13698-00001 0.43 0.32 0.31 45 11/16" Gray Advanced Low-E IG PEL-N-30-13243-00001 3 8 Argon 0.33 0.22 0.06 54 S with grilles-between-the-glass PEL-N-30-13447-00001 0.34 0.20 0.05 54 S with integral grilles PEL-N-30-13459-00001 0.34 0.20 0.05 54 S 1" Gray IG PEL-N-30-13379-00001 5 10 Air 0.43 0.34 0.3 45 with grilles-between-the-glass PEL-N-30-13675-00001 0.43 0.31 0.27 45 with integral grilles PEL-N-30-13699-00001 0.43 0.31 0.27 45 11/16" Green Advanced Low-E IG PEL-N-30-13244-00001 3 8 Argon 0.33 0.24 0.26 54 S with grilles-between-the-glass PEL-N-30-13448-00001 0.34 0.22 0.24 54 S with integral grilles PEL-N-30-13460-00001 0.34 0.22 0.24 54 S 1" Green IG PEL-N-30-13380-00001 5 10 Air 0.43 0.35 0.47 45 with grilles-between-the-glass PEL-N-30-13676-00001 0.43 0.32 0.43 45 with integral grilles PEL-N-30-13700-00001 0.43 0.32 0.43 45

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient Climate Zones VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating CA (1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-9 Architect Series® Traditional Awning Window

Products with Impact-Resistant Glass

Design Pressure Large Missile Rating D Hallmark Florida Product Product Certified Approval System Minimum Maximum

Vent 75 +75 / -85 411-H-1339 FL10026 Large Fixed +55 / -60 +60 / -75 411-H-1339 FL10022

All sizes and glass types are tested for air/water/structural and impact-resistance, and are certified for wind zone 4, large missile rating D. Florida Product Approval System number not needed if Miami-Dade County approved.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-10 Architect Series® Traditional Awning Window

Grille Profiles

Integral Light Technology ®

Putty and Ogee Glaze Grilles Putty and Ogee Glaze Grilles Clad Exterior - Wood Interior Wood Exterior - Wood Interior

5/8" 7/8" 1 1/4" 5/8" 7/8" 1 1/4"

5/8" ILT 7/8" ILT 1 1/4" ILT 5/8" ILT 7/8" ILT 1 1/4" ILT

Ogee Glaze Grilles Contoured Aluminum - Clad Exterior - Wood Interior Grilles-Between-the-Glass

2" 7/8" 1 1/4" 3/4" 3/4"

3/4" Contoured 3/4" Contoured GBG GBG

2" 7/8" 1 1/4"

7/8" ILT 1 1/4" ILT 2" ILT

Removable Interior Pine Grilles

2" 2" 3/4" 1 1/4" 1 1/4"

3/4" Traditional 1 1/4" Traditional 2" Traditional 1 1/4" Colonial 2" Colonial RMB RMB RMB RMB RMB

Interior wood ILT grilles available in Pine, Mahogany or Douglas Fir to match complete unit. Exterior wood ILT grilles available in Pine or Mahogany to match complete unit.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-11 Architect Series® Traditional Awning Window

Grille Patterns

Integral Light Technology® Grilles and Roomside Removable Grilles Prairie Lite Patterns

Size range availability is for 3/4", 7/8" and 1-1/4" grille width. Standard corner lite dimension for Prairie patterns = 2-1/2" VG. 9-Lite - Available in all standard and special sizes. 12-Lite 9-Lite 12-Lite 14-Lite - Available in units ≥ 1'9" and ≤ 2'11" in width, and ≥ 1'9" in height. 14-Lite - Available in units ≥ 1'9" in width and ≥ 2'11" in height .

Other Available Patterns

Cross - Standard visible glass to separator bar = one- quarter of total visible glass height. New England - Standard visible glass to separator bar = half of total visible glass height. Top Row - Standard visible glass to separator bar = 14" or half Cross New England Top Row Victorian of total visible glass height, whichever is smaller.

Grilles-Between-the-Glass Prairie Lite Patterns

9-Lite 12-Lite 14-Lite Other Available Patterns

Cross - Available for units with frame heights ≥35". Standard visible glass to separator bar = 1/4 of total visible glass height.

Top Row - Standard visible glass to separator bar = 14" for frame heights >35". Standard visible glass to Cross Top Row separator bar = 21" for 35" frame heights and optional for 41" frame height. Separator bar at 12" or 16" optional for frame heights >41".

For traditional patterns, see size tables.

VG = Visible Glass Lite dimensions noted can vary. Custom configurations are also available, for details contact your local Pella sales representative.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-12 Architect Series® Traditional Awning Window

Size Tables

Vent Units Vent and Fixed Units (451) (552) (603) (654) (756) (832) (908) (1 060) (1 213) (1 365) (1 518) (432) (533) (584) (635) (737) (813) (889) (1 041) (1 194) (1 346) (1 499)

Opening 1' 5 3 / 4" 1' 9 3 / 4" 1' 11 3 / 4" 2' 13 / 4" 2' 5 3 / 4" Opening 2' 8 3 / 4" 2' 11 3 / 4" 3' 5 3 / 4" 3' 11 3 / 4" 4' 5 3 / 4" 4' 11 3 / 4" Frame 1' 5" 1' 9" 1' 11" 2' 1" 2' 5" Frame 2' 8" 2' 11" 3' 5" 3' 11" 4' 5" 4' 11" " " 4 4 / / 3 3 F (451) (432) (451) (432) 1' 5" 1' 5" 1' 5 1' 5

" 1717 " 3217 3517 4117 4717 5317 5917 4 4 / / 3 3

(552) (533) (552) (533) F 1' 9" 1' 9" 1' 9 1' 9

" 2121 " 3221 3521 4121 4721 5321 5921 4 4 / / 3 3

(603) (584) (603) (584) F 1' 11 1' 11 1' 11" 1' 11" 5923

" 2323 " 3223 3523 4123 4723 5323 4 4 / / 3 3 (654) (635) (654) (635)

2' 1 2' 1 F 2' 1" 2' 1" 2525 3225 3525 4125 4725 5325 5925 " " 4 4 / / 3 3 (756) (737) (756) (737) 2' 5" 2' 5" 2' 5 2' 5 F 2929 3229 3529 4129 4729 5329 5929

Fixed Units " 4 / 3 (908) (889) 2' 11" 3235 3535 4135 4735 5335 5935 " 4 / 3 (1 060) (1 041) Standard Awning 3' 5" 3241 3541 4141 4741 5341 5941

Special Size Frame Dimensions* " 4 / 3 Minimum Maximum (1 213) (1 194) 3' 11 3' 5 2' 11 1' 1-3/4" W x 1' 1-3/4" H 4'5" W x 2'5" H 3247 3547 4147 4747 5347 5947 Vent (13.75" x 13.75") (53" x 29") " 4 /

(350 x 350) (1 346 x 737) 3 (1 365) (1 346) 4' 5" 3' 11" 12" W x 12" H 4' 5 10" W x 10" H Fixed (144" x 144") 3253 3553 4153 4753 5353 5953 (254 x 254) "

(3 658 x 3 658) 4 / 3 * Available within size range shown. Contact your local Pella representative for (1 518) (1 499) 4' 11 availability of Triple-Glazing on larger custom unit sizes. 4' 11" Keep frame dimensions to the nearest 1/4" increment. Frame height cannot exceed frame width on special size vent units. 3259 3559 4159 4759 5359 5959 " 4 / 3 (1 670) (1 651) 5' 5" Opening Dimensions 5' 5

CLAD EXTERIOR UNITS: Dimensions shown in tables are 3265 3565 4165 4765 5365 5965 rough opening dimensions. " 4 /

WOOD EXTERIOR UNITS: Use frame dimension plus 3 dimensions below. This dimension includes the use of (1 822) (1 803) 5' 11 standard 1-1/8" wood subsill. 5' 11" Frame Rough Masonry 3271 3571 4171 4771 5371 5971 Brickmould Width Height Width Height " 4 /

STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3 6' 1 (1 873) (1 854) 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" 6' 1"

For clad and wood units with impact-resistant glass, see the product 3273 3573 4173 4773 5373 5973 installation instructions or refer to local building code requirements.

Not to scale. F = Fixed Units only Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles. Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-13 Architect Series® Traditional Awning Window

Size Tables - Large Awning

Large Awning Special Size Frame Dimensions* Minimum Maximum 1'9" W x 1'5" H 6' 1" W x 6' 1" H Vent (21" x 17") (73" x 73") (889 x 889) (1 854 x 1 854)

* Available within size range shown. Keep frame dimensions to the nearest 1/4" increment.

Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in tables are rough opening dimensions.

WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. Frame Rough Masonry Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"

For clad and wood units with ® impact-resistant glass, see the product installation instructions or refer to local building code requirements.

Not to scale. Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles. All units are available as fixed in the Casement section. Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-14 Architect Series® Traditional Awning Window

Design Data

Vent and Fixed Fixed Only Standard Glass Thickness Standard Glass Thickness (mm) (mm) Dual-Pane Triple-Pane Dual-Pane Triple-Pane Vent Visible Glazing Glazing Performance Visible Glazing Glazing Performance Unit Area Glass Class & Unit Glass Class & Grade 1 Ft 2 Ft 2 Grade 1 Ft 2 or Annealed Annealed Annealed Annealed Tempered Tempered Tempered Tempered 1717V 0.8 0.9 2.5 3 3 CW50 3235 5.3 2.5 3 3 3 CW50 2121V 1.5 1.6 2.5 3 3 CW50 3241 6.4 2.5 3 3 3 CW50 2323V 2.0 2.1 2.5 3 3 CW50 3247 7.5 2.5 3 3 3 CW50 2525V 2.5 2.6 2.5 3 3 CW50 3253 8.6 2.5 3 3 3 CW50 2929V 3.6 3.8 2.5 3 3 CW50 3259 9.7 2.5 3 3 3 CW45/CW50 3217 1.8 2.1 2.5 3 3 CW50 3265 10.8 3 3 3 3 CW50 3221 2.6 2.8 2.5 3 3 CW50 3271 11.9 3 3 3 3 CW45/CW50 3223 3.0 3.1 2.5 3 3 CW50 3273 12.3 3 3 3 3 CW45/CW50 3225 3.3 3.5 2.5 3 3 CW50 3535 5.9 2.5 3 3 3 CW50 3229 4.1 4.2 2.5 3 3 CW50 3541 7.2 2.5 3 3 3 CW50 3517 2.0 2.3 2.5 3 3 CW50 3547 8.4 2.5 3 3 3 CW50 3521 2.9 3.1 2.5 3 3 CW50 3553 9.6 2.5 3 3 3 CW45/CW50 3523 3.3 3.5 2.5 3 3 CW50 3559 10.8 3 3 3 3 CW50 3525 3.7 3.9 2.5 3 3 CW50 3565 12.0 3 3 3 3 CW50 3529 4.5 4.7 2.5 3 3 CW50 3571 13.3 3 3 3 3 CW45/CW50 4117 2.4 2.8 2.5 3 3 CW50 3573 13.7 3 3 3 3 CW45/CW50 4121 3.4 3.7 2.5 3 3 CW50 4135 7.2 2.5 3 3 3 CW50 4123 3.9 4.2 2.5 3 3 CW50 4141 8.6 2.5 3 3 3 CW50 4125 4.4 4.7 2.5 3 3 CW50 4147 10.1 3 3 3 3 CW50 4129 5.4 5.7 2.5 3 3 CW50 4153 11.6 3 3 3 3 CW50 4717 2.8 3.2 2.5 3 3 CW50 4159 13.0 3 3 3 3 CW50 4721 4.0 4.4 2.5 3 3 CW50 4165 14.5 3 3 3 3 CW50 4723 4.6 4.9 2.5 3 3 CW50 4171 16.0 3 3 3 3 CW45/CW50 4725 5.2 5.5 2.5 3 3 CW50 4173 16.5 3 3 3 3 CW45/CW50 4729 6.3 6.7 2.5 3 3 CW50 4735 8.4 2.5 3 3 3 CW50 5317 3.3 3.7 2.5 3 3 CW50 4741 10.1 3 3 3 3 CW50 5321 4.6 5.0 2.5 3 3 CW50 4747 11.8 3 3 3 3 CW50 5323 5.3 5.7 2.5 3 3 CW50 4753 13.5 3 3 3 3 CW50 5325 5.9 6.3 2.5 3 3 CW50 4759 15.3 3 3 3 3 CW50 5329 7.3 7.6 2.5 3 3 CW50 4765 17.0 3 3 3 3 CW45/CW50 5917F -- 4.2 2.5 3 3 CW50 4771 18.7 4 4 4 4 CW50 5921F -- 5.6 2.5 3 3 CW50 4773 19.3 4 4 4 4 CW50 5923F -- 6.4 2.5 3 3 CW45/CW50 5335 9.6 2.5 3 3 3 CW45/CW50 5925F -- 7.1 2.5 3 3 CW45/CW50 5341 11.6 3 3 3 3 CW50 5929F -- 8.6 2.5 3 3 CW45/CW50 5347 13.5 3 3 3 3 CW50 5353 15.5 3 4 3 4 CW45/CW50 5359 17.5 3 4 3 4 CW40/CW50 5365 19.4 4 4 4 4 CW50 Standard Awning Miscellaneous Formulas 5371 21.4 4 4 4 4 CW50 5373 22.1 4 4 4 4 CW50 Width = Frame – 5-3/4" 5929 8.6 2.5 3 3 3 CW45/CW50 Visible Glass 5935 10.8 3 3 3 3 CW50 Height = Frame – 5-3/4" 5941 13.0 3 3 3 3 CW50 5947 15.3 3 3 3 3 CW50 Width = Frame – 4-3/8" 5953 17.5 3 4 3 4 CW40/CW50 Actual Glass Height = Frame – 4-3/8" 5959 19.7 4 4 4 4 CW50 5965 21.9 4 4 4 4 CW50 5971 24.1 4 4 4 4 CW45/CW50 5973 24.9 4 4 4 4 CW45/CW50

V = Vent Only F = Fixed Units only (—) = Not Applicable (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires tempered glass.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-15 Architect Series® Traditional Awning Window

Design Data - Large Awning

Large Awning Vent and Fixed Large Awning Vent and Fixed

Vent Visible Standard Glass Vent Visible Standard Glass Performance Performance Unit Area Glass Thickness (mm) Unit Area Glass Thickness (mm) Class & Grade 1 2 2 2 2 Class & Grade 1 Ft Ft Annealed Tempered Ft Ft Annealed Tempered 2121 1.2 1.6 2.5 3 LC40 3521 1.6 3.1 2.5 3 LC40 2123 1.2 1.8 2.5 3 LC40 3523 1.7 3.5 2.5 3 LC40 2125 1.3 2.0 2.5 3 LC40 3525 1.7 3.9 2.5 3 LC40 2129 1.4 2.5 2.5 3 LC40 3529 1.8 4.7 2.5 3 LC40 2135 1.6 3.1 2.5 3 LC40 3535 2.0 5.9 2.5 3 LC40 2141 1.8 3.7 2.5 3 LC40 3541 2.2 7.2 2.5 3 LC40 2147 2.0 4.4 2.5 3 LC40 3547 2.4 8.4 2.5 3 LC40 2153 2.2 5.0 2.5 3 LC40 3553 2.6 9.6 2.5 3 LC40 2159 2.3 5.6 2.5 3 LC40 3559 2.8 10.8 3 3 LC40 2321 1.2 1.8 2.5 3 LC40 4121 1.8 3.7 2.5 3 LC40 2323 1.3 2.1 2.5 3 LC40 4123 1.8 4.2 2.5 3 LC40 2325 1.3 2.3 2.5 3 LC40 4125 1.9 4.7 2.5 3 LC40 2329 1.5 2.8 2.5 3 LC40 4129 2.0 5.7 2.5 3 LC40 2335 1.7 3.5 2.5 3 LC40 4135 2.2 7.2 2.5 3 LC40 2341 1.8 4.2 2.5 3 LC40 4141 2.4 8.6 2.5 3 LC40 2347 2.0 4.9 2.5 3 LC40 4147 2.6 10.1 3 3 LC40 2353 2.2 5.7 2.5 3 LC40 4153 2.8 11.6 3 3 LC40 2359 2.4 6.4 2.5 3 LC40 4159 3.0 13.0 3 3 LC40 2521 1.3 2.0 2.5 3 LC40 4721 2.0 4.4 2.5 3 LC40 2523 1.3 2.3 2.5 3 LC40 4723 2.0 4.9 2.5 3 LC40 2525 1.4 2.6 2.5 3 LC40 4725 2.1 5.5 2.5 3 LC40 2529 1.5 3.1 2.5 3 LC40 4729 2.2 6.7 2.5 3 LC40 2535 1.7 3.9 2.5 3 LC40 4735 2.4 8.4 2.5 3 LC40 2541 1.9 4.7 2.5 3 LC40 4741 2.6 10.1 3 3 LC40 2547 2.1 5.5 2.5 3 LC40 4747 2.8 11.8 3 3 LC40 2553 2.3 6.3 2.5 3 LC40 4753 3.0 13.5 3 3 LC40 2559 2.5 7.1 2.5 3 LC40 4759 3.2 15.3 3 3 LC40 2921 1.4 2.5 2.5 3 LC40 5321 2.2 5.0 2.5 3 LC40 2923 1.5 2.8 2.5 3 LC40 5323 2.2 5.7 2.5 3 LC40 2925 1.5 3.1 2.5 3 LC40 5325 2.3 6.3 2.5 3 LC40 2929 1.7 3.8 2.5 3 LC40 5329 2.4 7.6 2.5 3 LC40 2935 1.8 4.7 2.5 3 LC40 5335 2.6 9.6 2.5 3 LC40 2941 2.0 5.7 2.5 3 LC40 5341 2.8 11.6 3 3 LC40 2947 2.2 6.7 2.5 3 LC40 5347 3.0 13.5 3 3 LC40 2953 2.4 7.6 2.5 3 LC40 5353 3.2 15.5 3 4 LC40 2959 2.6 8.6 2.5 3 LC40 3221 1.5 2.8 2.5 3 LC40 5359 3.3 17.5 3 4 LC40 3223 1.6 3.1 2.5 3 LC40 5921 2.3 5.6 2.5 3 LC40 3225 1.6 3.5 2.5 3 LC40 5923 2.4 6.4 2.5 3 LC40 3229 1.8 4.2 2.5 3 LC40 5925 2.5 7.1 2.5 3 LC40 3235 1.9 5.3 2.5 3 LC40 5929 2.6 8.6 2.5 3 LC40 3241 2.1 6.4 2.5 3 LC40 5935 2.8 10.8 3 3 LC40 3247 2.3 7.5 2.5 3 LC40 5941 3.0 13.0 3 3 LC40 3253 2.5 8.6 2.5 3 LC40 5947 3.2 15.3 3 3 LC40 3259 2.7 9.7 2.5 3 LC40 5953 3.3 17.5 3 4 LC40 5959 3.5 19.7 4 4 LC40 Large Awning Miscellaneous Formulas

Width = Frame – 5-3/4" Visible Glass Height = Frame – 5-3/4"

Width = Frame – 4-3/8" Actual Glass Height = Frame – 4-3/8"

(1) Maximum performance when glazed with appropriate glass thickness.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-16 Architect Series® Traditional Awning Window

Detailed Product Description - Aluminum-Clad Awning and Large Awning

Frame Hardware • Select softwood, immersion treated with Pella’s EnduraGuard® wood protection • Roto operator assembly formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes Steel worm gear sash operator with hardened gears. three active ingredients for protection against the effects of moisture, decay, Operator base is zinc die cast with painted finish. stains from mold and mildew. Plus, an additional ingredient adds protection Operator linkage is stainless steel. against termite damage. Exposed fasteners are stainless steel. • Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact- Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117. Resistant: [clear pine] [mahogany]]. Hinge slide and hinge arms are [Awning: Stainless steel] [Large Awning: wash • Exterior surfaces are clad with aluminum. hinge] [Impact-Resistant: wash hinge]. • Components are assembled with screws, staples and concealed corner locks. • All vent units are available with operator located on the [Awning: left or right side • Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm). as viewed from the exterior] [Large Awning or Impact-Resistant: bottom center of • Optional factory-applied jamb extensions available between 4-9/16" (116mm) the unit]. and 7-3/16" (183mm) wall depths. • SureLock® System—A single handle locking system operates positive-acting arms • Optional factory-installed fold-out installation fins with flexible fin corners. that reach out and pull the sash into a locked position: [Awning: one operating • Optional factory-applied EnduraClad® exterior trim. lock installed on units with frame widths 29" and less, two unison operating locks Sash installed on units with frame widths over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks • Select softwood, immersion treated with Pella’s EnduraGuard wood protection installed on units with frame height over 41"]. formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes • Style of hardware is [Standard integrated fold-away crank and standard lock three active ingredients for protection against the effects of moisture, decay, handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright stains from mold and mildew. Plus, an additional ingredient adds protection brass] [satin nickel] [oil-rubbed bronze] hardware finish] [Antiek fold-away crank against termite damage. and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] • Interior exposed surfaces are: [clear pine] [mahogany] [douglas fir]] [Impact- [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] Resistant: [clear pine] [mahogany]]. [Distressed Bronze] [Distressed Nickel] hardware finish]. • Exterior surfaces are clad with aluminum and sealed. • Corners mortised and tenoned, glued and secured with metal fasteners. Optional Products • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"] glazing. Grilles • Sash exterior and interior profile is ogee. • Integral Light Technology® grilles Weatherstripping Interior grilles are [5/8"] [7/8"] [1-1/4"] [2"] ogee profile that are solid [Pine] • Dual weatherstripping. [mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site Continuous, flexible santoprene material in dual durometer design with finishing] [factory primed] [pine: factory prefinished [paint] [stain]1]. welded corners, compressed between frame and sash for positive seal on all Exterior grilles are [5/8" putty glaze profile] [7/8" [putty glaze] [ogee] profile] four sides. [1-1/4" [putty glaze] [ogee] profile] [2" ogee profile] that are extruded Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between aluminum. edge of sash and frame. Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] [Simulated French (fixed units only)]. Glazing System 1 Insulating glass contains non-glare spacer between the panes of glass. • Quality float glass complying with ASTM C 1036. Grilles are adhered to both sides of the insulating glass with VHB acrylic • Custom and high altitude glazing available. adhesive tape and aligned with non-glare spacer. • Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]] [[clear] – or – [[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] [AdvancedComfort • Grilles-Between-the-Glass 3 Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]]. Insulating glass contains 3/4" contoured aluminum grilles permanently – or – installed between two panes of glass (exterior air-space on triple-pane • Silicone-glazed 1" triple-pane, dual-seal insulating glass [[annealed][tempered]] insulating glass). [[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided]. [krypton]] Interior color is [White] [Tan 4] [Brown 4] [Putty 4] [Black] [Morning Sky Gray] – or – [Ivory] [Sand Dune] [Harvest] [Cordovan] [Brickstone]. • Impact-Resistant Exterior color 5 is [Standard]2. Silicone-glazed 1" dual-seal impact-resistant insulating glass 1 [SGP]. – or – [[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear] [bronze] • Roomside Removable Grilles [gray] [green]]. Laminated clear interior light. [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with [Traditional] – or – [Prairie]] patterns that are removable solid pine wood bars steel-pinned at Silicone-glazed 11/16" dual-seal impact-resistant insulating glass 1 [PVB]. joints and fitted to sash with steel clips and tacks. [[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear]]. Laminated Interior [unfinished, ready for site finishing] [factory primed] [pine: factory [clear] interior light, or [[tempered] [annealed]] exterior light is [[multi-layer prefinished [paint] [stain]2]. Low-E]]. Laminated [[bronze] [gray] [green]] interior light. Exterior [unfinished, ready for site finishing] [factory primed] [factory Exterior prefinished, finish color matched to exterior cladding 5]. Screens • Aluminum-clad exteriors shall be finished with EnduraClad® protective finish, in a multi-step, baked-on finish. • InView™ screens Color is [Standard] [custom] 2. Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the – or – performance requirements of SMA 1201, set in aluminum frame fitted to • Aluminum-clad exteriors shall be finished with EnduraClad Plus protective finish inside of window, supplied complete with all necessary hardware. with 70% fluoropolymer resin in a multi-step, baked-on finish. Insect screen frame finish is [baked enamel [Champagne] [Artisan Greige] Color is [Standard] [custom] 2. [Skyline Gray] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish]. Interior – or – • [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] • Vivid View® screens [factory prefinished [paint] [stain] 1]. PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware. Insect screen frame finish is [baked enamel [Champagne] [Artisan Greige] [Skyline Gray] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish]. Hardware • Optional factory applied limited opening hardware available for vent units in (1) Insulating glass with argon is Low-E coated (except high altitude). All other insulating glass stainless steel; nominal 3" opening. (including high altitude Low-E) is air-filled. (2) Contact your local Pella sales representative for current color options. Sensors (3) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and • Optional factory installed integrated security sensors available in vent units. obscure insulated glass. (4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with tan or brown exterior. (5) Appearance of exterior grille color will vary depending on Low-E coating on glass. Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-17 Architect Series® Traditional Awning Window

Detailed Product Description - Wood Exterior Awning and Large Awning

Frame Optional Products ® • Select softwood, immersion treated with Pella’s EnduraGuard wood protection Grilles formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, • Integral Light Technology® grilles stains from mold and mildew. Plus, an additional ingredient adds protection Interior grilles are solid [5/8"] [7/8"] [1-1/4"] ogee profile that are solid [pine] against termite damage. [mahogany]. Interior surfaces are [unfinished, ready for site finishing] [factory • Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact- primed] [pine: factory prefinished [paint] [stain]3]. Resistant: [clear pine] [mahogany]]. Exterior grilles are solid [5/8"] [7/8"] [1-1/4"] putty glaze profile that are [pine] • Exterior surfaces are [pine: factory-primed] [mahogany: [factory-primed] [ready- [mahogany]. Exterior surfaces are water repellent, preservative-treated in to-stain]]. accordance with WDMA I.S.-4, and are [unfinished, ready for site finishing] • Overall frame depth is 4-3/8" (111mm) for a wall depth of 4-3/16" (106mm). [factory primed]. • Optional factory-applied jamb extensions available between 4-9/16" Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] (116mm) and 7-3/16" (183mm) wall depths, with Pella's standard [Simulated French (fixed units only)]. wood exterior. Insulating glass contains non-glare spacer between the panes of glass. Grilles are adhered to both sides of the insulating glass with VHB acrylic Sash adhesive tape and aligned with the non-glare spacer. • Select softwood, immersion treated with Pella’s EnduraGuard® wood protection – or – formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes • Grilles-Between-the-Glass 2 three active ingredients for protection against the effects of moisture, decay, Insulating glass contains 3/4" contoured aluminum grilles permanently stains from mold and mildew. Plus, an additional ingredient adds protection installed between two panes of glass (exterior air-space on triple-pane against termite damage. insulating glass). • Interior exposed surfaces are [clear pine] [mahogany] with no visible fastener Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided]. holes. Interior color is [White] [Tan 4] [Brown 4] [Putty 4] [Black] [Morning Sky Gray] • Exterior Surfaces are [pine: factory-primed] [mahogany [factory-primed] [ready- [Ivory] [Sand Dune] [Harvest] [Cordovan] [Brickstone]. to-stain]]. Exterior color 5 is [standard]3. • Corners mortised and tenoned, glued and secured with metal fasteners. – or – • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"] glazing. • Roomside Removable Grilles • Sash exterior profile is putty glaze, interior profile is ogee. [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with [Traditional] [Prairie] patterns that are removable solid pine wood bars steel-pinned at Weatherstripping joints and fitted to sash with steel clips and tacks. • Dual weatherstripping. Interior [unfinished, ready for site finishing] [factory primed] [pine: factory Continuous, flexible santoprene material in dual durometer design with prefinished [paint] [stain]3]. welded corners, compressed between frame and sash for positive seal on all Exterior [unfinished, ready for site finishing] [factory-primed] [finish color four sides. matched to exterior cladding]. Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between Screens edge of sash and frame. • InView™ Screens Glazing System Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the • Quality float glass complying with ASTM C 1036. performance requirements of SMA 1201, set in aluminum frame fitted to • Custom and high altitude [with argon] glazing available. inside of window, supplied complete with all necessary hardware. Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]] Insect screen frame finish is [baked enamel [Champagne] [Artisan Greige] [[clear] [[Advanced Low-E] [SunDefense™ Low-E] [AdvancedComfort Low-E] [Skyline Gray] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with match interior finish]. argon]]. – or – – or – • Vivid View® Screens Silicone-glazed 1" triple-pane insulating glass [[annealed][tempered]] PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in [[Advanced Low-E ] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] aluminum frame fitted to inside of window, supplied complete with all [krypton]] necessary hardware. Insect screen frame finish is [baked enamel [Champagne] [Artisan Greige] Interior [Skyline Gray] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to • [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] match interior finish]. [factory prefinished [paint] [stain]2]. Hardware Hardware Optional factory applied limited opening hardware available for vent units in • Roto operator assembly stainless steel; nominal 3" opening. Steel worm gear sash operator with hardened gears. Sensors Operator base to be zinc die cast with painted finish. Operator linkage, hinge slide, and hinge arms are stainless steel. • Optional factory installed integrated security sensors available in vent units. Exposed fasteners are stainless steel. Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117. • All vent units are available with operator located on the [Awning: left or right side as viewed from the exterior] [Large Awning: bottom center of the unit]. • SureLock® System—A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: [Awning: one operating lock installed on units with frame width 29" and less, two unison operating locks installed on units with frame width over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks installed on units with frame height over 41"]. • Style of hardware is [Standard integrated fold-away crank and standard lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright brass] [satin nickel] [oil-rubbed bronze] hardware finish][Antiek fold-away crank and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] [Distressed Bronze] [Distressed Nickel] hardware finish].

(1) Low-E coated insulating glass is argon-filled (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled. (2) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass. (3) Contact your local Pella sales representative for current designs and color options. (4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior. (5) Appearance of exterior grille color will vary depending on Low-E coating on glass.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-18 Architect Series® Traditional Awning Window

Unit Sections – Aluminum-Clad Exterior - Wood Collection

HEAD HEAD

SILL SILL

JAMBS JAMBS

Douglas Fir Solid Mahogany or Pine

Solid Pine

Scale 3" = 1' 0" All dimensions are approximate. See www.Pella.com for mullion limitations and reinforcing requirements. Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-19 Architect Series® Traditional Awning Window

Unit Sections – Aluminum-Clad Exterior, Ogee Exterior Profile

5" VENT [127] 3/4" [19] OJ OPERATOR JAMB J JAMB VH [73] 2 7/8" OJ J [94]

VH VENT HEAD 3 11/16" VS 1 13/16" [46]

[46] 1 13/16" [33] 1 5/16" FRAME HEIGHT VS VENT SILL

Optional Fold-out 2 15/16" 1 7/8" 3/4"

[48] [75] [47] [19]

1 7/8" Installation Fin

FRAME WIDTH [19] [19] 3/4" 3/4"

FIXED 3/4" [19] FH FJ FIXED JAMB [70] FJ 2 3/4" [94] 3 11/16"

FS FH FIXED HEAD [46]

1 13/16" 1 13/16"

[46] [33] 1 5/16" FRAME HEIGHT FS FIXED SILL Optional Fold-out 2 7/8" 1 7/8" 3/4" Installation Fin [73] [47] [19] [47] 1 7/8" FRAME WIDTH [19] 3/4"

Typical Joining Mullions

VERTICAL JOINING MULLION HORIZONTAL JOINING MULLION VERTICAL JOINING MULLION VENT / FIXED VENT / VENT VENT / VENT

Scale 3" = 1' 0" All dimensions are approximate. See Combinations Section for mullion limitations and reinforcing requirements. Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-20 Architect Series® Traditional Awning Window

Unit Sections – Wood Exterior, Putty Exterior Profile

4 3/8" VENT [111]

VH 3/4" LJ LOCK JAMB HJ HINGE JAMB [19] [73]

OJ VJ 2 7/8"

VH VENT HEAD LS [106]

1 13/16" 4 3/16" [46] [46] FRAME HEIGHT VS VENT SILL 1 13/16" [29] [47] 1 1/8" 1 7/8"

2 7/8" 1 7/8" 3/4" [19] 3/4" [73] [47] [19]

[46] 1 3/16" 1 3/16" FRAME WIDTH [28] 1 13/16" [30] [30] 1 1/16"

5 7/16" [138] 1-78" Brickmould #3443 1-1/8" Subsill #3544 Shown 4 3/8" FIXED [111]

FH FJ FIXED JAMB [73]

FJ 2 7/8"

FH FIXED HEAD [106]

FS 4 3/16" [46] 1 13/16" FRAME HEIGHT FS FIXED SILL [29] [47] 1 1/8" 1 7/8"

1 3/16" 2 7/8" 1 7/8" 3/4" 1 3/16" [19] 3/4" [30] [73] [47] [19] [30]

[46] FRAME WIDTH [28] 1 13/16" 1 1/16"

5 7/16" [138]

VERTICAL JOINING MULLION HORIZONTAL JOINING MULLION VERTICAL JOINING MULLION VENT / VENT FIXED / VENT VENT / FIXED

Unit Sections – Large Awning Aluminum-Clad Exterior, Ogee Exterior Profile

5" VENT [127] 3/4" [19] VH LJ LOCK JAMB [72] 2 7/8" LJ [94]

VH VENT HEAD 3 11/16" VS 1 13/16" [46]

[46] 1 13/16" [33] 1 5/16" FRAME HEIGHT VS VENT SILL

Optional Fold-out 2 7/8" 1 7/8" 3/4" [48]

1 7/8" Installation Fin [73] [47] [19]

FRAME WIDTH [19] [19] 3/4" 3/4"

Typical Joining Mullions

HORIZONTAL JOINING MULLION VERTICAL JOINING MULLION VERTICAL JOINING MULLION FIXED / VENT VENT / FIXED VENT / VENT Scale 3" = 1' 0" All dimensions are approximate. See Combinations Section for mullion limitations and reinforcing requirements. Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-22 Architect Series® Traditional Awning Window

Unit Sections – Large Awning Wood Exterior, Putty Exterior Profile

4 3/8" VENT [111]

VH 3/4" LJ LOCK JAMB [19] [73] 2 7/8"

LJ VH VENT HEAD [106]

1 13/16" 4 3/16" [46] [46] FRAME HEIGHT VS VENT SILL VS 1 13/16" [29] [47] 1 1/8" 1 7/8"

2 7/8" 1 7/8" 3/4" [19] 3/4" [73] [47] [19]

[46] 1 3/16" 1 3/16" FRAME WIDTH [28] 1 13/16" [30] [30] 1 1/16"

5 7/16" [138] 1-78" Brickmould #3443 1-1/8" Subsill #3544 Shown

Scale 3" = 1' 0" All dimensions are approximate. See www.Pella.com for mullion limitations and reinforcing requirements.

Pella 2021 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com AW-23