DOCSLIB.ORG

Solid Ink Colours: True, Vibrant…And Environmentally Responsible

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Solid Ink Colours: True, Vibrant…And Environmentally Responsible X_17297_SLDFS-01EB LANGUAGE: ENGLISH FREEDMAN INT. NO: 17297 PROOF NO: 01 PLATES: CMYK DATE: 27-10-2010 PAGE 1 Solid ink colours: true, vibrant…and environmentally Solid Ink printers and responsible. Multifunction Systems. Solid ink’s cartridge-free design and minimal packaging, its nearly waste-free printing process and its safe, toxin-free solid ink sticks make it a very environmentally-conscious way to print. Less consumables means less to throw away. When a laser printer runs out of toner, you are left with big, bulky print cartridges that need to be disposed of. Not to mention other replaceables such as fusers and imaging units. Solid ink printers use compact solid ink sticks with no cartridges. So when you run out of ink, there’s nothing left to throw away. And because the ink sticks are so small, there’s also less packaging to recycle. The only other replaceable unit is a maintenance roller. This lasts for tens of thousands of Consumables pages, so it only needs to be replaced a few times in the life of the printer. Solid ink Laser Over the four year life of a typical cartridge-based toner toner 1 1cartridges printer, the waste generated amounts to 111 kgs. A Xerox solid ink printer produces only 8 kgs. of waste! 2 maintenance kit 2 imaging units 3 fuser Safe and clean. Resin-based solid ink sticks are completely safe and clean, and contain no solvents. Unlike laser print cartridges, they cannot spill, leak or smudge on your clothes. Waste from 1 printer X_17297_SLDFS-01EB LANGUAGE: ENGLISH FREEDMAN INT. NO: 17297 PROOF NO: 01 PLATES: CMYK DATE: 27-10-2010 PAGE 2 Laser More ways Solid ink to save with solid ink Save valuable Effi cient use of paper offi ce space. Standard features like automatic two-sided printing and copying and N-up printing Besides drastically fi t more output onto reduced landfi ll a single sheet, saving waste, Solid ink’s time, trees and money. cartridge-free design and minimal packaging also means less energy used during manufacturing and less storage space for better transportation effi ciency and fewer delivery trucks on the road – saving you shipping costs while benefi ting the environment. Solid ink Save more with free software packages are small enough to fi t in your desk drawer, saving your work With every Xerox solid ink printer or MFP environment too. There’s no need to take up an entire cabinet with printer you buy, you can download GreenPrint™ supplies. software for free. It automatically highlights and removes unwanted pages – like that last page with just a URL, banner ad, logo or legal jargon – prior to printing. A reporting feature keeps track of the pages and money you’ve saved. Multiple functions = copier use less power. printer fax When you choose a solid ink VS multifunction system, it does the work of several stand-alone offi ce products (printer, copier, scanner and = fax) while consuming less electricity. Solid ink Scan to save paper multifunction system The email and scan-to-fi le capabilities on solid ink multifunction systems replace the need to mail hard copy documents, reducing paper inventories and minimising the energy required to deliver Recycled paper welcome documents by air or ground Because solid ink prints the transportation. same vivid colour on any paper, you can use recycled paper for all your printing. You don’t need expensive, super-white paper to get superb image quality. Plus, you can recycle solid ink printouts. © 2010 XEROX CORPORATION. All rights reserved. XEROX ®, XEROX and Design ® and Phaser ® are registered trademarks of XEROX CORPORATION in the U.S. and/or other countries. 10/10 SLDFS-01EB.
Load more

Recommended publications
  • The Effects of Ink and Media Parameters on Offset Solid Ink and Xerographic Halftoned Image View Quality
    IS&T's 1998 PICS Conference IS&T's 1998 PICS Conference Copyright 1998, IS&T The Effects of Ink and Media Parameters on Offset Solid Ink and Xerographic Halftoned Image View Quality Steve Korol Tektronix Color Printing and Imaging Division Wilsonville, Oregon Abstract meet these goals, the successful device must have the ability to print acceptable quality images on a wide variety of Xerographic and offset solid ink technologies are currently substrates reliably. Although both technologies under study dominant in the networked office color printer market. Here, generally render text acceptably, each possesses a set of speed, reliability, ease-of-use, cost-per-copy, and image limitations when grayscale images are considered. quality are all important factors to the office customer who In the case of offset solid ink technology, material is often on a tight budget. Both xerography and solid ink properties of the ink and the print processing steps within have been able to deliver acceptable text output on a wide the printer do indeed afford great media flexibility; however, variety of inexpensive papers; however, such is not always in current implementations of the technology, images may the case for halftoned images. Interestingly, when halftoned appear grainy to the customer, especially in areas of light image quality fails, it is often for widely different reasons optical density (in the range 0.1 to 0.3). The primary reason depending on the technology employed. for this perceived granularity is the minimum diameter and While offset solid ink exhibits excellent receiver media optical density of the smallest achievable mark.
    [Show full text]
  • Introduction to Printing Technologies
    Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping Introduction to Printing Technologies Study Material for Students : Introduction to Printing Technologies CAREER OPPORTUNITIES IN MEDIA WORLD Mass communication and Journalism is institutionalized and source specific. Itfunctions through well-organized professionals and has an ever increasing interlace. Mass media has a global availability and it has converted the whole world in to a global village. A qualified journalism professional can take up a job of educating, entertaining, informing, persuading, interpreting, and guiding. Working in print media offers the opportunities to be a news reporter, news presenter, an editor, a feature writer, a photojournalist, etc. Electronic media offers great opportunities of being a news reporter, news editor, newsreader, programme host, interviewer, cameraman,Edited with theproducer, trial version of Foxit Advanced PDF Editor director, etc. To remove this notice, visit: www.foxitsoftware.com/shopping Other titles of Mass Communication and Journalism professionals are script writer, production assistant, technical director, floor manager, lighting director, scenic director, coordinator, creative director, advertiser, media planner, media consultant, public relation officer, counselor, front office executive, event manager and others. 2 : Introduction to Printing Technologies INTRODUCTION The book introduces the students to fundamentals of printing. Today printing technology is a part of our everyday life. It is all around us. T h e history and origin of printing technology are also discussed in the book. Students of mass communication will also learn about t h e different types of printing and typography in this book. The book will also make a comparison between Traditional Printing Vs Modern Typography.
    [Show full text]
  • Relationship of Solid Ink Density and Dot Gain in Digital Printing
    International Journal of Engineering and Technical Research (IJETR) ISSN: 2321-0869, Volume-2, Issue-7, July 2014 Relationship of Solid Ink Density and Dot Gain in Digital Printing Vikas Jangra, Abhishek Saini, Anil Kundu gain while meeting density requirements. As discussed Abstract— Ours is the generation which is living in the age of above Dot gain is the measurement of the increase in tone science and technology. The latest scientific inventions have value from original file to the printed sheet. given rise to various technologies in every aspect of our life. Newer technologies have entered the field of printing also. II. MATERIALS AND METHODS Digital printing is one of these latest technologies which have further revolutionized entire modern printing industry in many Densitometer is used for measuring density of ink ways. It also facilitates working on large variety of surfaces, on the paper. Densitometer can be classified according to besides these factors digital printing have grown widely and type of materials they are designed to measure i.e. opaque made a special impact in print market. The presented analysis and transparent. Density of opaque materials is measured by system is used for study of print quality in Digital Printing. reflected light with a device called reflection type densitometer. Density of transparent materials is measured Index Terms— Digital Printing, Dot Gain, Solid ink density, by transmitted light with a device called transmission type Coated Paper and Uncoated Paper. densitometer. In order to measure the print quality i.e. solid ink density (SID) and dot gain (DG) on coated and uncoated I.
    [Show full text]
  • Infotrends Emerging Technologies White Paper
    January 17, 2008 Strategic Assessment Emerging Marking Technologies: A Review and Comparison of Xerographic and Ink- Based Imaging Authors Abstract Robert Palmer Several ink-based marking technologies have recently surfaced, and these technologies are causing quite a stir in the market. The potential for inkjet technology is based on some basic principles: ink costs less than toner; ink print heads have relatively few parts; and the quality that can be delivered is high. This white paper provides an overview and history of marking technologies and explains the potential benefits that ink-based systems could deliver to the office printing market. Published by Digital Peripherals Solutions Consulting Service For More Information © 2008 InfoTrends, Inc. If you would like to order extra copies of this report, receive permission to use any part of the www.infotrends.com report, or be informed of upcoming market updates, reports, and related projects, please e-mail us at [email protected]. Headquarters: Europe: Asia: 97 Libbey Industrial Parkway 3rd Floor, Sceptre House Hiroo Office Building Suite 300 7-9 Castle Street 1-3-18 Hiroo, Shibuya-ku Weymouth, MA 02189 Luton, Bedfordshire Tokyo 150-0012 United States United Kingdom, LU1 3AJ Japan +1 781 616 2100 +44 1582 400120 +81 3 5475 2663 [email protected] [email protected] [email protected] Emerging Marking Technologies January 2008 Table of Contents Introduction ................................................................................................................................
    [Show full text]
  • FFTA FIRST 5.0 Design Guide (Pdf)
    Complimentary Design Guide 5.0 Flexographic Image Reproduction Specifications & Tolerances Complimentary Design Guide An FTA Strategic Planning Initiative Project The Flexographic Technical Association has made this FIRST 5.0 supplement of the design guide available to you, and your design partners, as an enhancement to your creative process. To purchase the book in it’s entirety visit: www.flexography.org/first Copyright, © 1997, ©1999, ©2003, ©2009, ©2013, ©2014 by the Flexographic Technical Association, Inc. All rights reserved, including the right to reproduce this book or portions thereof in any form. Library of Congress Control Number: 2014953462 Edition 5.0 Published by the Flexographic Technical Association, Inc. Printed in the United States of America Inquires should be addressed to: FTA 3920 Veterans Memorial Hwy Ste 9 Bohemia NY 11716-1074 www.flexography.org International Standard Book Number ISBN-13: 978-0-9894374-4-8 Content Notes: 1. This reference guide is designed and formatted to facilitate ease of use. As such, pertinent information (including text, charts, and graphics) are repeated in the Communication and Implementation, Design, Prepress and Print sections. 2. Registered trademark products are identified for information purposes only. All products mentioned in this book are trademarks of their respective owner. The author and publisher assume no responsibility for the efficacy or performance. While every attempt has been made to ensure the details described in this book are accurate, the author and publisher assume no responsibility for any errors that may exist, or for any loss of data which may occur as a result of such errors. .1 ii Flexographic Image Reproduction Specifications & Tolerances 5.0 INTRODUCTION The Mission of FIRST FIRST seeks to understand customers’ graphic requirements for reproduction and translate those aesthetic requirements into specifications for each phase of the flexographic printing process including: customers, designers, prepress providers, raw material & equipment suppliers, and printers.
    [Show full text]
  • Correlation of Ink Viscosity and Printability in Offset Lithography Process on Paperboard Used in Packaging
    Original scientific paper Madhura P. Mahajan, Swati Bandyopadhyay Correlation of ink viscosity and printability in offset lithography process on paperboard used in packaging Correlation of ink viscosity and printability in offset lithography process on paperboard used in packaging Madhura P. Mahajan1, Swati Bandyopadhyay2 1 Department of Printing Engineering, Pune Vidyarthi Griha’s College of Engineering and Technology Parvati, Pune Maharashtra, India 2 Department of Printing Engineering, Jadavpur University, Kolkata, India Corresponding author: Madhura P. Mahajan, [email protected] Abstract In the recent years, the demands for offset inks with better flow ability and viscosity have risen higher with the improvements of printing techniques. To ensure uniformity in printability sheet after sheet it is very important to maintain certain print conditions for that print job as approved by customers and use this data for future reference of printing. The quality of offset printing process depends on many chemical and physical specifi- cations of the ma terials and components involved in the process. Most important being printing inks and its rheology. In this work, three process color cyan inks have been formulated with varying levels of viscosity with use of certain rheology modifiers. Trials on the printing machine were conducted using a systematic layout of test elements on a fully automatic offset lithography printing machine using a Solid Bleached Sulphite Board (SBS) and the print results were correlated to rheological parameters such as viscosity and thixotropy. The tone value increase (TVI) was measured and was correlated to viscosity and index of thixotropy. Higher viscosity yields lower dot gain and better color reproducibility.
    [Show full text]
  • Colorqube 8570 Solid Ink Color Printer
    Xerox® ColorQube® 8570 Color Printer More color performance • Fast print speed. Get your jobs out quickly – as quick as 40 ppm color and black-and-white. • Incredible detail and halftones. 2400 FinePoint™ print resolution ensures exceptional print quality. • Always superior color. Solid ink gives your documents rich, vibrant colors on all media, including recycled paper, with no degradation over time. • Wide media range. Print on everything from plain paper to labels, enve- lopes, card stock, business cards and glossy media. • The colors you expect. PANTONE® approved solid-color simulations and Xerox color correction technology deliver results that always match your expectations. • More printing for longer. A high monthly duty cycle of up to 85,000 Continuing the Xerox-exclusive tradition images means you’ll have a reliable color printer for many years to come. of advanced cartridge-free solid ink, the • Accurate results, every time. True Adobe® PostScript® 3™ and PCL 5c ColorQube 8570 color printer is a powerful, emulation print languages ensure your jobs are consistently accurate. no-fuss and waste-conscious printing solution • Print when you’re ready. A first-page-out-time as fast as 5 seconds that’s simple and highly productive with the means in most cases your print job’s ready by the time you walk to advantage of superior color output. the printer. • No time lost for color. The ColorQube 8570 prints black-and-white and color at the same fast speed. Your office, greener • Intuitive color correction. The Color By Words feature lets you select • Less waste, less impact. Packaging for the printer and solid ink sticks desired color modifications from a simple drop-down list.
    [Show full text]
  • UKUT 0631 (TCC) Appeal Number: FTC/69/2014 CUSTOMS DUTY
    [2015] UKUT 0631 (TCC) Appeal number: FTC/69/2014 CUSTOMS DUTY – engineered solid ‘ink sticks’ – whether classifiable as ‘printing ink ... other inks, whether or not concentrated or solid’ under CN heading 3215 or as ‘parts’ of printers under CN heading 8443 – General Rules of Interpretation considered – held, applying GRI 3(a) that CN heading 3215 provides the more specific description – appeal dismissed UPPER TRIBUNAL (TAX AND CHANCERY CHAMBER) XEROX LIMITED Appellant - and - THE COMMISSIONERS FOR HER MAJESTY’S REVENUE AND CUSTOMS Respondents TRIBUNAL: MR JUSTICE NUGEE Sitting in public at the Rolls Building, London EC4A 1NL on 9 November 2015 John M Peterson and Richard F O’Neill, Neville Peterson LLP, New York, NY, USA for the Appellant Hui Ling McCarthy, instructed by the General Counsel and Solicitor for HM Revenue and Customs, for the Respondents © CROWN COPYRIGHT 2015 DECISION Mr Justice Nugee: Introduction 1. This is an appeal by Xerox Ltd (“Xerox”) from a decision (“the Decision”) of 5 the First-tier Tribunal (Judge John Walters QC and Mr Julian Stafford) (“the FTT”) dated 16 January 2014. The Decision is reported as Xerox Ltd v HMRC [2014] UKFTT 083 (TC), and references below to numbers in square brackets are, unless otherwise apparent, references to paragraphs of the Decision. 10 2. The appeal is brought with the permission of the FTT (Judge Walters) granted on 25 March 2014. It concerns the correct classification for customs purposes of what are colloquially called ‘ink sticks’ (“the Goods”) which are imported for use exclusively with Xerox solid ink printers. 3. As explained in one of the many US patents included in the bundle before me: 15 “Solid ink or phase change ink printers conventionally receive ink in a solid form, either as pellets or as ink sticks.
    [Show full text]
  • Greenprint Xerox® Solid Ink Edition User Guide
    GreenPrint Xerox® Solid Ink Edition User Guide GreenPrint Xerox Solid Ink Edition User Guide Page 1 Proprietary Notice The information disclosed in this document, including all designs and related materials, is the valuable property of GreenPrint Technologies and/or its licensors. GreenPrint Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice. Reproduction of this document or portions thereof without prior written approval of GreenPrint Technologies is prohibited. GreenPrint Xerox Solid Ink Edition User Guide Page 2 Table of Contents About This Document…………………………………………………………………………………….….….…6 System Requirements………………………………………………………………………………………….…..7 Operating System and Hardware Compatibility………………………………………………………7 Application Compatibility………………………………………………………………………………………..7 Printer Compatibility………………………………………………………………………………………..……..7 Installation………………..………………………………………………………………………………..…………..8 Pre-Installation Requirements…………………………………………………………….……….………….8 Microsoft .NET Framework 3.5 SP1……………………………………………………………….…………8 Administrator Account………………………………………………………………………….……….………..8 Enterprise Users………………………………………………………………………………….………….……....9 License Key…………………………………………………………………………………………………..………….9
    [Show full text]
  • An Experimental Investigation Into the Effect of Density of Ink Film Thickness on Dot Area Changes on an Offset Press Jon Ralph Braswell
    South Dakota State University Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange Electronic Theses and Dissertations 1968 An Experimental Investigation into the Effect of Density of Ink Film Thickness on Dot Area Changes on an Offset Press Jon Ralph Braswell Follow this and additional works at: https://openprairie.sdstate.edu/etd Recommended Citation Braswell, Jon Ralph, "An Experimental Investigation into the Effect of Density of Ink Film Thickness on Dot Area Changes on an Offset Press" (1968). Electronic Theses and Dissertations. 3418. https://openprairie.sdstate.edu/etd/3418 This Thesis - Open Access is brought to you for free and open access by Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. It has been accepted for inclusion in Electronic Theses and Dissertations by an authorized administrator of Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. For more information, please contact [email protected]. AN EXPERIMENTAL INVESTIGATION INTO THE EFFECT OF .. ,_ I DENSITY OF INK FILM THICKNESS ON Detr AREA CHAt-nES ON AN OFFSET PRESS BY JON RALPH BRASWELL A thesis subm i..tted.. in partial fulfillment of the require;nents for the degree Master of Science, Department of Printing and Journalism, South Dakota State University 1968 LlBR""A""RY -�OUTH DAKOTA STATE UNIVERSITY AN EXPERIMENTAL INVESTIGA 'l1 ION INTO THE EFFECT OF DENSITY OF INK FILM THICKNESS ON Dar AREA CHAM}ES ON AN OFFSET PRESS This thesis is approved as a creditable, independent investigation by a candidate for the degree, Master of Science, and acceptable as meeting the requirements for this degree; but ·without implying that the conclusions reached by the candidate are necessarily the conclusions reached by the major department.
    [Show full text]
  • Analysis of Effect of Primer Coat on Solid Ink Density Of
    [Kumar* et al., 5(7): July, 2016] ISSN: 2277-9655 IC™ Value: 3.00 Impact Factor: 4.116 IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY ANALYSIS OF EFFECT OF PRIMER COAT ON SOLID INK DENSITY OF METALIZED SHEETS PRINTED WITH DRY TONER BASED DIGITAL PRINTING Mohit Kumar*, Aman Bhardwaj * Assitant Professor, Dept. of Printing Tech., GJUS&T Scholar M.Tech , Dept. of Printing Tech DOI: 10.5281/zenodo.57993 ABSTRACT The purpose of this analysis is to determine the relationship between primer coat and the solid ink density by printing the primer coated metalized board and non primer coated metalized board with a dry toner based digital printing process. The results showed that there is some effect of primer coat on solid ink density of metalized sheets printed with dry toner based Digital Printing process. The solid ink density of primer coated metalized boards printed was found higher in primer coated boards then the non primer coated boards. INTRODUCTION Print providers raise their profiles either by broadening the spectrum of materials they can process or by specialising in selected materials and/or formats. However, substrates are often the cause of vociferous complaints from customers. This study report provides an overview of working on Digital printing machines with metalized materials, particularly the effect of primer coat on solid ink density. Metalized boards Metalized boards have a foil covering on the base paper board. It can be accomplished by a common glue lamination technique, which utilizes heat, pressure and hot glue to bond foil to the base. Glue lamination is performed by several paper companies.
    [Show full text]
  • Print-And-Peel Fabrication for Microfluidics
    Annals of Biomedical Engineering, Vol. 38, No. 1, January 2010 (Ó 2009) pp. 21–32 DOI: 10.1007/s10439-009-9831-x Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications? MARLON S. THOMAS,BRENT MILLARE,JOSEPH M. CLIFT,DUODUO BAO,CONNIE HONG, and VALENTINE I. VULLEV Department of Bioengineering, University of California, Riverside, CA 92521, USA (Received 30 May 2009; accepted 23 October 2009; published online 7 November 2009) Abstract—This article reviews the development and the important areas such as biosensing, diagnostics and advances of print-and-peel (PAP) microfabrication. PAP drug discovery.10,22,29,56,62,83,87 The huge attraction techniques provide means for facile and expedient prototyp- toward microfluidics results from its capabilities to ing of microfluidic devices. Therefore, PAP has the potential for broadening the microfluidics technology by bringing it to achieve significant reduction in reagent volumes, in researchers who lack regular or any accesses to specialized performance time and in power consumption while fabrication facilities and equipment. Microfluidics have, allowing massive parallelism.62,67,69,70 Over the last indeed, proven to be an indispensable toolkit for biological two decades, microfluidic systems have been developed and biomedical research and development. Through acces- for a broad range of application in biology, chemistry sibility to such methodologies for relatively fast and easy 2,5,8,15,40,51,55,59,61,65,68,73,77,81 prototyping, PAP has the potential to considerably accelerate and physics. the impacts of microfluidics on the biological sciences and Due to its availability and to the relative simplicity of engineering.
    [Show full text]