DOCSLIB.ORG

Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) First Published: June 16, 2014 Last Modified: 0

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) First Published: June 16, 2014 Last Modified: 0 Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) First Published: June 16, 2014 Last Modified: 0, Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-32322-01 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) © 2014 Cisco Systems, Inc. All rights reserved. CONTENTS Preface Preface vii Obtaining Documentation and Submitting a Service Request vii Document Conventions vii Related Documentation ix CHAPTER 1 Using the Command-Line Interface 1 Information About Using the Command-Line Interface 1 Command Modes 1 Using the Help System 3 Understanding Abbreviated Commands 5 No and Default Forms of Commands 5 CLI Error Messages 5 Configuration Logging 6 How to Use the CLI to Configure Features 6 Configuring the Command History 6 Changing the Command History Buffer Size 6 Recalling Commands 7 Disabling the Command History Feature 7 Enabling and Disabling Editing Features 8 Editing Commands Through Keystrokes 8 Editing Command Lines That Wrap 10 Searching and Filtering Output of show and more Commands 11 Accessing the CLI Through a Console Connection or Through Telnet 11 CHAPTER 2 Configuring EtherChannels and Link-State Tracking 13 Finding Feature Information 13 Restrictions for EtherChannels 13 Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32322-01 iii Contents Information About EtherChannels 14 EtherChannel Overview 14 EtherChannel Modes 15 EtherChannel on Controllers 15 EtherChannel Link Failover 16 Channel Groups and Port-Channel Interfaces 16 Port Aggregation Protocol 18 PAgP Modes 18 Silent Mode 19 PAgP Learn Method and Priority 19 PAgP Interaction with Other Features 20 Link Aggregation Control Protocol 21 LACP Modes 21 LACP and Link Redundancy 22 LACP Interaction with Other Features 22 EtherChannel On Mode 22 Load-Balancing and Forwarding Methods 23 MAC Address Forwarding 23 IP Address Forwarding 24 Load-Balancing Advantages 24 EtherChannel and Controller Stacks 25 Controller Stack and PAgP 26 Controller Stacks and LACP 26 Default EtherChannel Configuration 26 EtherChannel Configuration Guidelines 27 Layer 2 EtherChannel Configuration Guidelines 29 Layer 3 EtherChannel Configuration Guidelines 30 How to Configure EtherChannels 30 Configuring Layer 2 EtherChannels (CLI) 30 Configuring Layer 3 EtherChannels (CLI) 32 Configuring EtherChannel Load-Balancing (CLI) 34 Configuring EtherChannel Extended Load-Balancing (CLI) 36 Configuring the PAgP Learn Method and Priority (CLI) 37 Configuring LACP Hot-Standby Ports 38 Configuring the LACP Max Bundle Feature (CLI) 39 Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) iv OL-32322-01 Contents Configuring the Port Channel Min-Links Feature (CLI) 40 Configuring the LACP System Priority (CLI) 41 Configuring the LACP Port Priority (CLI) 42 Monitoring EtherChannel, PAgP, and LACP Status 44 Configuration Examples for Configuring EtherChannels 45 Configuring Layer 2 EtherChannels: Examples 45 Configuring Layer 3 EtherChannels: Examples 45 Configuring LACP Hot-Standby Ports: Example 46 Additional References for EtherChannels 46 Feature Information for EtherChannels 48 CHAPTER 3 Configuring Flex Links and the MAC Address-Table Move Update Feature 49 Finding Feature Information 49 Restrictions for Configuring Flex Links and MAC Address-Table Move Update 49 Information About Flex Links and MAC Address-Table Move Update 50 Flex Links 50 Flex Links Configuration 51 VLAN Flex Links Load Balancing and Support 51 Multicast Fast Convergence with Flex Links Failover 52 Learning the Other Flex Links Port as the mrouter Port 52 Generating IGMP Reports 52 Leaking IGMP Reports 53 MAC Address-Table Move Update 53 Flex Links VLAN Load Balancing Configuration Guidelines 55 MAC Address-Table Move Update Configuration Guidelines 55 Default Flex Links and MAC Address-Table Move Update Configuration 55 How to Configure Flex Links and the MAC Address-Table Move Update Feature 56 Configuring Flex Links (CLI) 56 Configuring a Preemption Scheme for a Pair of Flex Links (CLI) 57 Configuring VLAN Load Balancing on Flex Links (CLI) 59 Configuring MAC Address-Table Move Update (CLI) 60 Configuring a Controller to Obtain and Process MAC Address-Table Move Update Messages (CLI) 61 Monitoring Flex Links, Multicast Fast Convergence, and MAC Address-Table Move Update 62 Configuration Examples for Flex Links 63 Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32322-01 v Contents Configuring Flex Links: Examples 63 Configuring VLAN Load Balancing on Flex Links: Examples 64 Configuring the MAC Address-Table Move Update: Examples 65 Configuring Multicast Fast Convergence with Flex Links Failover: Examples 66 Additional References for Flex Links and MAC Address-Table Move Update 68 Feature Information for Flex Links and MAC Address-Table Move Update 69 CHAPTER 4 Configuring UniDirectional Link Detection 71 Finding Feature Information 71 Restrictions for Configuring UDLD 71 Information About UDLD 72 Modes of Operation 72 Normal Mode 72 Aggressive Mode 72 Methods to Detect Unidirectional Links 73 Neighbor Database Maintenance 73 Event-Driven Detection and Echoing 73 UDLD Reset Options 74 Default UDLD Configuration 74 How to Configure UDLD 75 Enabling UDLD Globally (CLI) 75 Enabling UDLD on an Interface (CLI) 76 Monitoring and Maintaining UDLD 77 Additional References for UDLD 78 Feature Information for UDLD 79 Layer 2 (Link Aggregation) Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) vi OL-32322-01 Preface • Obtaining Documentation and Submitting a Service Request, page vii • Document Conventions, page vii • Related Documentation, page ix Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Document Conventions This document uses the following conventions: Convention Description ^ or Ctrl Both the ^ symbol and Ctrl represent the Control (Ctrl) key on a keyboard. For example, the key combination ^D or Ctrl-D means that you hold down the Control key while you press the D key. (Keys are indicated in capital letters but are not case sensitive.) bold font Commands and keywords and user-entered text appear in bold font. Italic font Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. Courier font Terminal sessions and information the system displays appear in courier font. Layer 2 (Link Aggregation) Configuration
Load more

Recommended publications
  • Ieee 802.1 for Homenet
    IEEE802.org/1 IEEE 802.1 FOR HOMENET March 14, 2013 IEEE 802.1 for Homenet 2 Authors IEEE 802.1 for Homenet 3 IEEE 802.1 Task Groups • Interworking (IWK, Stephen Haddock) • Internetworking among 802 LANs, MANs and other wide area networks • Time Sensitive Networks (TSN, Michael David Johas Teener) • Formerly called Audio Video Bridging (AVB) Task Group • Time-synchronized low latency streaming services through IEEE 802 networks • Data Center Bridging (DCB, Pat Thaler) • Enhancements to existing 802.1 bridge specifications to satisfy the requirements of protocols and applications in the data center, e.g. • Security (Mick Seaman) • Maintenance (Glenn Parsons) IEEE 802.1 for Homenet 4 Basic Principles • MAC addresses are “identifier” addresses, not “location” addresses • This is a major Layer 2 value, not a defect! • Bridge forwarding is based on • Destination MAC • VLAN ID (VID) • Frame filtering for only forwarding to proper outbound ports(s) • Frame is forwarded to every port (except for reception port) within the frame's VLAN if it is not known where to send it • Filter (unnecessary) ports if it is known where to send the frame (e.g. frame is only forwarded towards the destination) • Quality of Service (QoS) is implemented after the forwarding decision based on • Priority • Drop Eligibility • Time IEEE 802.1 for Homenet 5 Data Plane Today • 802.1Q today is 802.Q-2011 (Revision 2013 is ongoing) • Note that if the year is not given in the name of the standard, then it refers to the latest revision, e.g. today 802.1Q = 802.1Q-2011 and 802.1D
    [Show full text]
  • IEEE 802.11Be Multi-Link Operation: When the Best Could Be to Use Only a Single Interface
    IEEE 802.11be Multi-Link Operation: When the Best Could Be to Use Only a Single Interface Alvaro´ L´opez-Ravent´os Boris Bellalta Dept. Information and Communication Technologies Dept. Information and Communication Technologies Universitat Pompeu Fabra (UPF) Universitat Pompeu Fabra (UPF) Barcelona, Spain Barcelona, Spain [email protected] [email protected] Abstract—The multi-link operation (MLO) is a new feature can find the most disruptive updates. We refer to the adoption proposed to be part of the IEEE 802.11be Extremely High of multi-link communications, which represents a paradigm Throughput (EHT) amendment. Through MLO, access points shift towards concurrent transmissions. Although under the and stations will be provided with the capabilities to transmit and receive data from the same traffic flow over multiple radio multi-link label we find the multi-AP coordination and the interfaces. However, the question on how traffic flows should be multi-band/multi-channel operation features, this article is distributed over the different interfaces to maximize the WLAN focused on the analysis of the latter one. performance is still unresolved. To that end, we evaluate in this Upon its current version, the IEEE 802.11 standard already article different traffic allocation policies, under a wide variety defines two MAC architectures for supporting the multi- of scenarios and traffic loads, in order to shed some light on that question. The obtained results confirm that congestion-aware band/multi-channel operation. However, both designs present policies outperform static ones. However, and more importantly, a common limitation: MAC service data units (MSDUs) the results also reveal that traffic flows become highly vulnerable belonging to the same traffic flow can not be transmitted to the activity of neighboring networks when they are distributed across different bands [4].
    [Show full text]
  • MR52 Datasheet
    MR52 Datasheet MR52 Dual-band 802.11ac Wave 2 access point with separate radios dedicated to security, RF management, and Bluetooth High performance 802.11ac MR52 and Meraki cloud Wave 2 wireless management: A powerful The Cisco Meraki MR52 is a cloud-managed 4x4:4 802.11ac combo Wave 2 access point with MU-MIMO support. Designed for next- generation deployments in offices, schools, hospitals, shops, Management of the MR52 is through the Meraki cloud, with an and hotels, the MR52 offers high performance, enterprise-grade intuitive browser-based interface that enables rapid deployment security, and simple management. without time-consuming training or costly certifications. Since the MR52 is self-configuring and managed over the web, it can The MR52 provides a maximum of 2.5 Gbps* aggregate frame be deployed at a remote location in a matter of minutes, even rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated without on-site IT staff. third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth 24x7 monitoring via the Meraki cloud delivers real-time alerts Low Energy (BLE) scanning and Beaconing. if the network encounters problems. Remote diagnostic tools enable immediate troubleshooting over the web so that With the combination of cloud management, high performance distributed networks can be managed with a minimum of hassle. hardware, multiple radios, and advanced software features, the MR52 makes an outstanding platform for the most demanding The MR52’s firmware is automatically kept up to date via the of uses - including high-density deployments and bandwidth or cloud.
    [Show full text]
  • Ds-Ruckus-R710.Pdf
    R710 Indoor 802.11ac Wave 2 4x4:4 Wi-Fi Access Point DATA SHEET Bandwidth-hungry voice and video applications. Internet of Things (IoT) connections. An explosion of new devices and content. With these kinds of demands, organizations in every industry need more from their Wi-Fi. But with hundreds of devices and nonstop wireless noise and interference, busy indoor spaces can make challenging wireless environments. The Ruckus R710 is a premier indoor access point, delivering industry-leading performance and reliability in the most demanding high-density locations. With BENEFITS data rates up to 800Mbps (2.4GHz) and 1.733Gbps (5GHz), the R710 delivers the highest available throughput for Wi-Fi clients. STUNNING WI-FI PERFORMANCE Provide a great user experience no matter The R710 delivers reliable, high-performance connectivity in schools, universities, how challenging the environment with public venues, hotels, conference centers, and other busy indoor spaces. The BeamFlex+™ adaptive antenna technology perfect choice for data-intensive streaming multimedia applications, it delivers and a library of 4K+ directional antenna picture-perfect HD-quality IP video, while supporting voice and data applications patterns. with stringent quality-of-service requirements. SERVE MORE DEVICES Connect more devices simultaneously with The R710 802.11ac Wave 2 Wi-Fi AP incorporates patented technologies found only four MU-MIMO spatial streams and in the Ruckus Wi-Fi portfolio. concurrent dual-band 2.4/5GHz radios while enhancing non-Wave 2 device • Extended coverage with patented BeamFlex+ utilizing multi-directional performance. antenna patterns. AUTOMATE OPTIMAL THROUGHPUT • Improve throughput with ChannelFly, which dynamically finds less congested ChannelFly™ dynamic channel technology Wi-Fi channels to use.
    [Show full text]
  • A 24Port 10G Ethernet Switch
    A 24-port 10G Ethernet Switch (with asynchronous circuitry) Andrew Lines 1 Agenda Product Information Technical Details Photos 2 Tahoe: First FocalPoint Family Member The lowest-latency feature-rich 10GE switch chip Tahoe · 10G Ethernet switch - 24 Ports · Line rate performance - 240Gb/s bandwidth SPI CPU JTAG LED - 360M frames/s - Full-speed multicast Frame Processor · Fully-integrated single chip (Scheduler) - 1MB frame memory - 16K MAC addresses ® ® · Lowest latency Ethernet ) 4) s s - -4 X X - 200ns with copper cables u u (C (C x x I I ™ U U e e · Rich Feature Set RapidArray A X XA N N (packet storage) - Extensive layer 2 features · Flexible SERDES interfaces - 10G XAUI (CX-4) - 1G SGMII Asynchronous Blocks 3 Tahoe Hardware Architecture Modular architecture, centralized control SPI CPU JTAG LED Interface Interface Interface Interface Management Frame Control LCI Lookup Handler Stats RX Port Logic Scheduler TX Port Logic P M M P Ser Ser C A A C Des Des S C C S Switch Element Data Path ® ® s s ™ u u x RapidArray x e (1MB Shared Memory) e N N RX Port Logic TX Port Logic P M M P Ser Ser C A A C Des Des S C C S 4 Tahoe Chip Plot Fabricated in TSMC 0.13um Ethernet Port Logic - SerDes RapidArray Memory - PCS - 1MB shared - MAC Nexus Crossbars - 1.5Tb/s total - 3ns latency Scheduler - Highly optimized - High event rate MAC Table - 16K addresses Management Frame Control - CPU interface - Frame handler - JTAG - Lookup - EEPROM interface - Statistics - LEDs 5 Bridge Features Robust set of layer-2 features · General Bridge Features · Security - 16K MAC entries - 802.1x; MAC Address Security - STP: multiple, rapid, standard · Monitoring - Learning and Ageing - Rich monitoring terms - Multicast GMRP and IGMPv3 · logical combination of terms · VLAN Tag (IEEE 802.1Q-2003) · Src Port, Dst Port, VLAN, - Add / Remove tags Traffic Type, Priority, Src - Per port association default MA, Dst MA, etc.
    [Show full text]
  • Cisco Small Business 300 Series Managed Switches Administration
    ADMINISTRATION GUIDE Cisco Small Business 300 Series Managed Switch Administration Guide Release 1.3.5 Contents Table of Contents Chapter 1: Getting Started 1 Starting the Web-based Configuration Utility 1 Quick Start Device Configuration 4 Interface Naming Conventions 5 /Window Navigation 7 Chapter 2: Status and Statistics 11 System Summary 11 Viewing Ethernet Interfaces 11 Viewing Etherlike Statistics 13 Viewing 802.1X EAP Statistics 14 Health 15 Managing RMON 15 View Log 23 Chapter 3: Administration: System Log 24 Setting System Log Settings 24 Setting Remote Logging Settings 26 Viewing Memory Logs 28 Chapter 4: Administration: File Management 30 System Files 30 Upgrade/Backup Firmware/Language 33 Download/Backup Configuration/Log 37 Configuration Files Properties 42 Copy/Save Configuration 43 Auto Configuration via DHCP 44 Cisco Small Business 300 Series Managed Switch Administration Guide 1 Contents Chapter 5: Administration 51 Device Models 51 System Settings 53 Management Interface 55 User Accounts 55 Defining Idle Session Timeout 55 Time Settings 56 System Log 56 File Management 56 Rebooting the Device 56 Health 58 Diagnostics 59 Discovery - Bonjour 59 Discovery - LLDP 59 Discovery - CDP 60 Ping 60 Chapter 6: Administration: Time Settings 62 System Time Options 63 SNTP Modes 64 Configuring System Time 65 Chapter 7: Administration: Diagnostics 73 Testing Copper Ports 73 Displaying Optical Module Status 75 Configuring Port and VLAN Mirroring 77 Viewing CPU Utilization and Secure Core Technology 78 Chapter 8: Administration: Discovery
    [Show full text]
  • GS12 Standalone Fully Managed Gigabit Ethernet Switch
    GE Intelligent Platforms GS12 Standalone Fully Managed Gigabit Ethernet Switch Features The GS12 is a rugged, fully managed, stand- Onboard built-in test (BIT) ensures the GS12 • Fully, rugged standalone alone Gigabit Ethernet switch providing can be easily linked with other boards to Gigabit Ethernet Switch twelve 10/100/1000BaseT Ethernet ports. provide integrated system level health Aimed at out-of-the-chassis applications – monitoring and diagnostics. • 12-port fully managed 10/100/1000BaseT the networking of multiple subsystems, for (Gigabit) Ethernet switch. example – the GS12 has comprehensive The switch management may be accessed • 1x 10/100BaseT management port management capabilities that include via in-band management through the 1G • Layer 2/3 switching with advanced VLANs, Link Aggregation, Spanning Tree, ports, or via out-of-band management. support for VLANs, QoS and IPv6 IPv4, IPv6, Traffic Policing, Quality of Service Out-of-band management of the switch is • 24 Gbits/sec non-blocking switch fabric (QoS) functionality such as guaranteed accessible via 10/100 BaseT Ethernet port with full wirespeed performance Bandwidth allocation and prioritization. or a RS232 serial port, available on the front • Configuration through Web interface panel D38999 connectors. • Unmanaged version also available Connection to the light-weight, space- • Conduction cooled efficient, conduction-cooled GS12 is via the The GS12 has comprehensive network • Supports IPv6 switching/routing rugged front panel connectors, which meet management capabilities. MIL-STD-810F requirements for humidity, • Remote management support, salt spray and dust. Configuration of the switch is via a (Telnet, SSH and SNMP) comprehensive and intuitive web interface, • 2x RS232 communication ports Featuring non-blocking shared memory command line interface or SNMP.
    [Show full text]
  • Network Virtualization Using Shortest Path Bridging (802.1Aq) and IP/SPB
    avaya.com Network Virtualization using Shortest Path Bridging and IP/SPB Abstract This White Paper discusses the benefits and applicability of the IEEE 802.1aq Shortest Path Bridging (SPB) protocol which is augmented with sophisticated Layer 3 routing capabilities. The use of SPB and the value to solve virtualization of today’s network connectivity in the enterprise campus as well as the data center are covered. This document is intended for any technically savvy network manager as well as network architect who are faced with: • Reducing time to service requirements • Less tolerance for network down time • Network Virtualization requirements for Layer 2 (VLAN-extensions) and Layer 3 (VRF-extensions) • Server Virtualization needs in data center deployments requiring a large set of Layer 2 connections (VLANs) • Traffic separation requirements in campus deployments for security purposes as well as robustness considerations (i.e. contractors for maintenance reasons needing access to their equipment or guest access needs) • Multi-tenant applications such as airports, governments or any other network with multiple discrete (legal) entities that require traffic separation WHITE PAPER 1 avaya.com Table of Contents 1. Introduction ........................................................................................................................ 3 2. Benefits of SPB ................................................................................................................... 4 2.1 Network Service Enablement ............................................................................................................
    [Show full text]
  • Bandwidth Aggregation Across Multiple Smartphone Devices
    BANDWIDTH AGGREGATION ACROSS MULTIPLE SMARTPHONE DEVICES A Thesis Presented to the Faculty of California Polytechnic State University San Luis Obispo In Partial Fulfillment of the Requirements for the Degree Master of Science in Computer Science by Bradley Raymond Zeller January 2014 c 2014 Bradley Raymond Zeller ALL RIGHTS RESERVED ii COMMITTEE MEMBERSHIP TITLE: Bandwidth Aggregation Across Multiple Smartphone Devices AUTHOR: Bradley Raymond Zeller DATE SUBMITTED: January 2014 COMMITTEE CHAIR: Phillip Nico, Ph.D. Professor of Computer Science COMMITTEE MEMBER: John Bellardo, Ph.D. Professor of Computer Science COMMITTEE MEMBER: Foaad Khosmood, Ph.D. Professor of Computer Science iii ABSTRACT Bandwidth Aggregation Across Multiple Smartphone Devices Bradley Raymond Zeller Smartphones now account for the majority of all cell phones in use today [23]. Ubiquitous Internet access is a valuable feature offered by these devices and the vast majority of smartphone applications make use of the Internet in one way or another. However, the bandwidth offered by these cellular networks is often much lower than we typically experience on our standard home networks, leading to a less-than-optimal user experience. This makes it very challenging and frustrating to access certain types of web content such as video streaming, large file downloads, loading large webpages, etc. Given that most modern smartphones are multi-homed and are capable of ac- cessing multiple networks simultaneously, this thesis attempts to utilize all available network interfaces in order to achieve the aggregated bandwidth of each to improve the overall network performance of the phone. To do so, I implement a bandwidth aggregation system for iOS that combines the bandwidths of multiple devices located within close proximity of each other.
    [Show full text]
  • LAN Aggregation
    CHAPTER 3 LAN Aggregation Objectives Upon completion of this chapter, you will be able to answer the following questions: n What is link aggregation? n What are the commands to configure EtherChannel? n What is EtherChannel technology? n What are the methods to troubleshoot link aggregation with EtherChannel? Key Terms This chapter uses the following key terms. You can find the definitions in the Glossary. Port Aggregation Protocol (PAgP) page 122 PAgP auto page 127 Link Aggregation Control Protocol LACP active page 129 (LACP) page 122 LACP passive page 129 PAgP desirable page 127 03_SNCG_3282_r2a.indd 121 2/12/14 3:19 PM 122 Scaling Networks Companion Guide Introduction (3.0.1.1) Link aggregation is the ability to create one logical link using multiple physical links between two devices. This allows load sharing among the physical links, rather than having STP block one or more of the links. EtherChannel is a form of link aggrega­ tion used in switched networks. This chapter describes EtherChannel and the methods used to create an Ether­ Channel. An EtherChannel can be manually configured or can be negotiated by using the Cisco­proprietary protocol Port Aggregation Protocol (PAgP) or the IEEE 802.3ad–defined protocol Link Aggregation Control Protocol (LACP). The configuration, verification, and troubleshooting of EtherChannel are discussed. Class Activity 3.0.1.2: Imagine This It is the end of the work day. In your small­ to medium­sized business, you are try­ ing to explain to the network engineers about EtherChannel and how it looks when it is physically set up.
    [Show full text]
  • MIF Vs Other IETF Efforts
    MIF vs Other IETF Efforts MIF BoF 74th IETF, San Francisco 26‐Mar‐2009 Gabriel Montenegro How is MIF different from other efforts • MIF: how to cope with multiple different interfaces • Address Selection and RFC3484 Design Team efforts • Handling multiple interfaces via one address or identifier – SHIM6 – SCTP – Mobile IP – HIP – RRG and LISP • Handling multiple interfaces via aggregation at Transport or above – Trilogy and Resource Pooling • Proxy MIP and address sharing across interfaces • Link Aggregation, Load‐balancing and failover (LBFO) Default Address Selection and RFC3484 • RFC3484 (and bis) only provide Default address selection. Specific scenarios or protocols beyond this may depart from the default • RFC3484 is currently being revised via a 6MAN design team – Their focus is more on the site/enterprise perspective. • MIF focuses on the node with multiple interfaces case. • Revision to RFC3484 should reflect both of these (and perhaps other) perspectives. • RFC3484 revision is in scope of proposed MIF WG – Including policy injection from multiple interfaces – MIF would work with 6man towards this • But MIF also deals with other issues (e.g., DNS, default gateway) Handling multiple addresses or interfaces • Many efforts to better handle multiple interfaces, addresses, RLOCs (“routing locators”), etc • Two main approaches – via one address or identifier: SHIM6, SCTP, Mobile IP, HIP, RRG and LISP – as aggregated paths at the Transport Layer or above: Trilogy and Resource Pooling at Transport layer • They all share with MIF: – how to choose src/dst pair to talk with peer, so all can benefit from RFC3484 discussions (including better policy injection) – But in doing so, each of the above efforts may depart from the RFC3484 default.
    [Show full text]
  • BATCP: Bandwidth-Aggregation Transmission Control Protocol
    S S symmetry Article BATCP: Bandwidth-Aggregation Transmission Control Protocol Ismael Amezcua Valdovinos 1,†, Jesus Arturo Perez Diaz 2,†, Luis Javier Garcia Villalba 3,*,† and Tai-hoon Kim 4,† 1 Facultad de Telemática, Universidad de Colima, Av. Universidad No 333-Colonia Las Víboras, Colima 28040, Mexico; [email protected] 2 Computer Science Department, Faculty of Engineering, Tecnológico de Monterrey, Autopista del Sol km 104 + 060, Xochitepec, Morelos 62790, Mexico; [email protected] 3 Group of Analysis, Security and Systems (GASS), Department of Software Engineering and Artificial Intelligence (DISIA), Faculty of Computer Science and Engineering, Office 431, Universidad Complutense de Madrid (UCM), Calle Profesor José García Santesmases, 9, Ciudad Universitaria, 28040 Madrid, Spain 4 Department of Convergence Security, Sungshin Womens University, 249-1 Dongseon-dong 3-ga, Seoul 136-742, Korea; [email protected] * Correspondence: [email protected]; Tel.: +34-91-394-7638 † These authors contributed equally to this work. Received: 21 July 2017; Accepted: 17 August 2017; Published: 21 August 2017 Abstract: The Transmission Control Protocol (TCP) is the most used transport protocol to exchange reliable data between network devices. A considerable number of extensions have been implemented into TCP to achieve better performance. In this paper, we will present, describe, implement, and analyze a new protocol extension called Bandwidth-Aggregation TCP (BATCP), which enables the concurrent use of network interfaces, to improve network performance on multi-homed nodes. BATCP allows the use of multiple TCP connections to accept multiple IP addresses from a multi-homed node, scheduling segments among them based on a scheduling algorithm. Our results show that BATCP achieves full exploitation of each network interface, achieving up to 100% network utilization using two ADSL connections in real-world scenarios.
    [Show full text]