In This Issue We Would Talk About Fiber Glass Cutters. Cutting of Reinforecement Is the Foremost Activity Before the Production Starts

Total Page：16

File Type：pdf, Size：1020Kb

In this issue we would talk about Fiber Glass Cutters. Cutting of reinforecement is the foremost activity before the production starts. Often it is considered not so important. However, prciously cut reinforcement will surely reflect on the final part. Also, time saved in cutting would result is higher production. Electric fiberglasss cutter is suitable to all needs. These tools are cost eective to cut and kind of fiberglass material such as woven roving, knitted fabrics/mat and other fiberglass textiles.Tools for cutting can be catogrised as follows: A. Electric Cutters Heavy Duty Fiberglass Cutter – This cutter is with powerful 180W motor for extreme cutting work. Can cut multiple layers of tough fabric (upto 25mm thick) at a time. Blade cuts with fast scissor like action and can cut fiberglass with ease. Medium Duty Fiberglass Cutter – Has same functions as heavy duty fiberglass cutter but is slightly less powerful. Handy Fiber Glass Cutter – This is designed for precision and intricate cutting. This is very light weight (1.10 kg) and has a push button design for easy operation. This is small in size but has high torque motor for swift results. B. Shears Scissors – Blades of these scissors are made with special high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting eciency. Its full-length "blade-to-grip" design help maintain optimum cutting balance. Interlock screw are engineered to provide long lasting blade tension. Elastomeric padded grip on the handle takes care of comfort and ease in long operations for user. Wheel Cutter - Wheel cutter is a handy tool and easier to use than scissors. Free hand movement allows it to cut in any direction. Good for veils, light weight cloth and fabrics. Soft padded handle with automatic guard allows complete comfort and safety. Standard 45 mm diameter tungsten steel blade provides clean cutting. There can be many more in this category but above are the most ecient and perticularly designed for reinforcement plastic industry. Contact: 4812/24, Ansari Road, Darya Ganj New Delhi - 110 002, India T: +91 11 23250093, +91 11 23250094 F: +91 11 2328 2881 E: [email protected], W: www.tools4frp.com.

Copy Link

Recommended publications

Adjustable Glass Bottle Cutter by Sbanas on April 25, 2015
technology workshop craft home food play outside costumes Adjustable Glass Bottle Cutter by sbanas on April 25, 2015 Table of Contents Adjustable Glass Bottle Cutter . 1 Intro: Adjustable Glass Bottle Cutter . 2 Step 1: Materials . 2 Step 2: Cutting And Sanding . 3 Step 3: Attach Corners . 3 Step 4: Cutting Holes And Slots . 4 Step 5: Glass Cutter . 5 Step 6: Finishing . 7 Step 7: First Try . 8 Step 8: Polyurethane . 9 Step 9: Finished . 9 Advertisements . 10 http://www.instructables.com/id/Adjustable-Glass-Bottle-Cutter/ Author:sbanas I'm 16 in Waco, Texas. I love being outside and building things, I can build anything with just a few ideas and tools. Intro: Adjustable Glass Bottle Cutter I have wanting to make a bottle cutter for a while now, just because I really like the idea of making glasses from bottles. I found a lot of designs online, but one thing they all had in common, is that none of them are adjustable. Now I want to be able to cut different types and sizes of bottles, so I came up with this design that can be adjusted for different bottles. Cutting glass bottles can be really fun, and drinking out of a glass you made is also satisfying. Plus you get to repurpose an ordinary glass bottle into something new and useful. Step 1: Materials For this project I used: - 1x4 Scraps - Glass Cutter - Polyurethane - 1/4"x2" Bolts - Wing Nuts - Epoxy - Wood Glue - Screws - Glass Bottles http://www.instructables.com/id/Adjustable-Glass-Bottle-Cutter/ Step 2: Cutting And Sanding After I decided how I was going to build it, I cut out the pieces and sanded them.
[Show full text]
Download the Ripper ™ Owner's Manual
Owner’s Manual Model #R1 Manufactured by: Rescue 42, Inc. PO Box 1242 Chico, CA 95927 Phone: (888) 42-RESCUE www.Rescue42.com © Copyright 2019 Rescue 42, Inc. Part # R1-INSTR-V1 Introduction Thank you for purchasing The Ripper™. The Ripper™ is designed to cut vehicle laminated glass (LG) windshields and side windows to access trapped or non-compliant subjects and injured or dying patients. Please read this manual in its entirety before using The Ripper™. Safe Operations and Warnings - Read Before Using WARNING: TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS OWNER’S MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH. Cutting LG generates glass chips and fine dust/powder. Users must wear their agency-specified PPE, which should include protective clothing, gloves, eye and possibly respiratory protection. LG dust (non-crystalline glass dust or Amorphous Silica Dioxide) is only an irritant dust and is not considered to be hazardous. While most glass fragments will remain on the outside of the glass pane, some will fall inside. While often not possible, attempt to protect occupants from fragments. Although the blades do not appear or feel sharp to the touch, please note that the shear blade oscillates like a scissor to cut LG. Do not place your fingers or any parts of your body in or on the blades while the battery is attached to the cordless Impact Driver used to power the tool. Do not use The Ripper™ for cutting materials other than Laminated Glass (LG); you may damage the tool and will void the warranty.
[Show full text]
Tools for Tile & Stone Catalog
TOOLS FOR TILE & STONE CONTRACTORS CUTTING, PROFILING & POLISHING TH Since 1986 Celebrating 35 Years Providing Better Solutions to the Professional VERSION 6 CONTACT US WELCOME Alpha Professional Tools® was founded in 1986 and has become a leading manufacturer of quality tools for professionals in the natural/engineered stone, porcelain, ceramic, glass, construction, marine and automotive industries. Alpha® provides the best products for cutting, drilling, shaping and polishing all types of materials. In addition to providing the best products in the industry, Alpha Professional Tools® offers a variety of services to support their products. Company Contact Information: Headquarters & 16 Park Drive Training Center: Franklin, NJ 07416 Hours of Operation (EST): 8:30 a.m. - 5:00 p.m. Telephone No: 201-337-3343 Toll-Free No: 800-648-7229 Fax No: 201-337-2216 Toll Free Fax No: 800-286-0114 E-mail Orders to: Contact Us: [email protected] www.alpha-tools.com [email protected] [email protected] Follow Us: Sales Contacts by Territory – [email protected] Caribbean 201-337-3343 Ohio Valley 440-364-3759 Canada 519-546-9861 Pacific 800-648-7229 International 201-337-3343 South 480-848-6808 Midwest 630-849-7105 Southeast 678-977-1147 Northeast 973-830-7681 Southern CA 925-428-1292 Northern CA 925-428-1292 TABLE OF CONTENTS TOOLS STONE CUTTER • ESC-125, Wet Stone Cutter .......................................................................................2 • Countertop Trim Kit ....................................................................................................4
[Show full text]
Technical Guide for Glass Cutting Section 2 - Three Basic Categories of Cutting
Technical Guide for Glass Cutting Section 2 - Three Basic Categories of Cutting Three basic categories of glass cutting represent the majority of cutting applications – straight-line machine cutting, machine pattern cutting and hand cutting. In this section each category has a brief description of the various cutting functions. There are also listings of process considerations when setting up the cutters, cutting wheel selection guides for the various glass thickness and, some typical in-plant problems associated with the cutting process. Part 3 – Hand Cutting Description of Hand Cutting Hand cutting of the various glass covers a wide range of thickness, products, and degree of difficulty. Without a doubt, the finest quality of cutting can be done by hand. Hand cutting can most often be done by one person or by several people each doing the same job or by a crew of cutters doing one single operation. The chief tool is the cutter in which the cutting wheel is mounted and rotates on an axle. Cutters have many names: handles, hand stems, quills, etc. Some are inexpensive throw away tools. Most are precision tools using tungsten carbide cutting wheels and axles mounted in hardened steel wheel slots. The handles are weighted and fitted to the hand for comfort of repetitive use. The hand cutting operation is centered around the cutting table. The table is usually at least as large or larger than the largest piece of glass to be processed. It is also flat, firm, felt covered and equipped with everything the hand cutter may need to cut the product: vacuum frame load/unload, tilt table, air float, activated breaker bars, straight edges, squares, measuring bars, etc.
[Show full text]
69012 (For Material 1/4" Thru 3/4" OD) 79014
79022 Wheeler-Rex Glass Tube Cutters are small enough to carry in your pocket and almost as simple to use as a pair of pliers. Just wrap the chain around 79014 the tube and hook the nearest chain pin in the jaw. Then, a quick twist of the wrist, a slight squeeze of the handles and pop! It’s that simple to cleanly cut glass 1 tubing up to 1- /2" O.D. Broken tubing may also be trimmed close to the break. Cuts can be made 1 as close as /2" from the end of any tubing, and in some cases even closer! Unique cutting 69012 action based on the original Wheeler “Squeeze and Pop” cutting principle. 69012 (for material 1/4" thru 3/4" O.D.) 79014 (for material 1/4" thru 1" O.D.) 79022 (for material 1/4" thru 1-1/2" O.D.) Wheeler Manufacturing, Division of Rex International U.S.A., Inc. P.O. Box 688, 3744 Jefferson Road, Ashtabula, Ohio 44005 Phone: 440-998-2788 Fax: 440-992-2925 Toll-Free: 1-800-321-7950 www.wheelerrex.com E-mail: [email protected] Glass Tube VERSATILE The same tool may be used on a variety of brittle tubular materials CUTTERS including gauge glass (all types), Recommended laboratory glass, neon sign glass, oil Cutting Procedures: burner electrodes, porcelain insulators, 90° thermocouple protection tubes and more. 90° ACCURATE Cutter chain is wrapped Model 69012 90° around the tubing right at the point where cut is to be made. Any length 1. Grasp the tubing as shown.
[Show full text]
Tools and Their Uses NAVEDTRA 14256
NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
[Show full text]
Lazy Man's Guide to Stained Glass
A Lazy Man’s Guide to Stained Glass Professional tips, tricks, and shortcuts 3rd Edition by Dennis Brady Published by: DeBrady Glass Studios 566 David St. Victoria, B.C. V8T 2C8 Canada Tele: (250) 382-9554 Email: [email protected] Website: www.glasscampus.com All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage system, without permission in writing from the author, except by a reviewer who may quote brief passages in a critical article or review. Copyright 2002 by Dennis Brady Printed in Canada This book is dedicated to my son Brant. He introduced me to stained glass and helped me start DeBrady Glass Studios. It’s unfortunate he couldn’t stay long enough to see what it became. Recognition Covers and Illustrations by: Lar de Souza 4 Division Street Acton, Ontario L7J 1C3 CANADA Tele: (519) 853-5819 Fax: (519) 853-1624 Email: [email protected] Website: http://www.lartist.com/ Swag lamp and transom: Inspired by designs from Somers-Tiffany Inc 920 West Jericho Turnpike Smithtown, NY 11787 Tele: (631) 543-6660 Email: [email protected] Website: http://www.somerstiffany.com Prairie table lamp: Inspired by a design by Dale Grundon 305 Lancaster Ave Mt. Gretna, PA 17064 Tele: (717) 964-2086 Email: [email protected] Website: http://www.DaleGrundon.com Acknowledgement So many people helped me over the years that there wouldn’t be space here to say thank you to all those it was due.
[Show full text]
Pipe Cutters
NEW PRODUCTS IMPROVED 4991 CLOSE QUARTERS TUBING CUTTER Page 31 Phone (440) 998-2788 8:00 a.m. to 4:30 p.m. Eastern Standard Time BOLT CUTTERS Page 58 Toll-Free 1-800-321-7950 Fax (440) 992-2925 STAINLESS STEEL TUBING CUTTERS Page 33 Web www.wheelerrex.com E-mail [email protected] Follow us on Facebook, Twitter & LinkedIn HYDRANT NUT Page 51 BENCH VISE To expedite telephone Page 42 orders, please have your customer number ready. We accept Visa, Mastercard & Discover. Wheeler manufacturing Division of Rex international U.S.A., inc. 3744 jefferson road 373080 GAS HYDROSTATIC TEST PUMP Ashtabula, oh 44004 Page 26 32450 PNEUMATIC HYDROSTATIC TEST PUMP Page 29 363060 GAS FIRE HOSE TESTER 701440 HOT TAP ARBOR ASSEMBLY Page 29 Page 46 j'7OƒOoƢźƢMÈ¼ÌÌ¤¼·y°ƢY¼¼°Ƣ yÒy°¼ƢźƢ*ÌÌØƢĲ TABLE OF CONTENTS Pipe Cutters Pages 4–9 Trash Pumps Page 30 Pipe Freezing Kit Page 45 sManual & Ratchet Pipe Cutters s2" and 3" Trash Pumps sPipe Freezing Kit sSoil Pipe Coupling Torque Wrenches s4" Trash Pump sReplacement Polar Spray sHydraulic Pipe Cutters & Fluid sMudsucker Pumps Drilling and Tapping Tools Pages 46–49 sReplacement Cutter Chains Tube Tools Pages 31–34 sInternal Cast Iron Pipe Cutter sHot Tap System & Accessories sSteel Pipe Cutters sAuto-C Cutters sDrill Taps sHinged Pipe Cutters sClose Quarters Cutter sTapping Fluid sPipe Cleaner/Scraper sTube Brushes sPortable Hole Cutters sPipeMaster and Accessories sRatch Cuts and Kits sHole Cutter Systems & Shells sTube Tools sEarthworm Hydro-Drill Grooving & Fabrication Pages 10–12 sStainless Steel Tube Cutters
[Show full text]
Rhyno2 Operator's Manual
RHYNO2 OPERATOR’S MANUAL - USA Catalog No. RWC – 2 NOTICE: This tool is specially designed to cut 0.240 inch (7 mm) laminated glass only. Use of this product to cut materials other than laminated glass may damage the tool and voids the warranty. TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR’S MANUAL. [1] Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. SYMBOLOGY WARNING: USERS MUST READ ALL INSTRUCTIONS V Volts WARNING: To reduce the risk of Properly Recycled Batteries injury, read the instruction manual before Hertz use. Read all warnings, safety Hz instructions, and maintenance AC Alternating Current instructions before use and/or before DC Direct Current performing any maintenance. Ampere Supervision is required when A inexperienced or underage (<18 years) AWG American Wire Gage operators use this tool. LED Light Emitting Diode C Celcius United States and International Patent WARNING – to reduce the risk Pending. of injury, user must read instruction
[Show full text]
Keencut 63" Excalibur 5000 Substrate Cutter - EXC5160
Keencut 63" Excalibur 5000 Substrate Cutter - EXC5160 Instruction Manual EXCALIBUR 1000X EXCALIBUR╞ INSTRUCTION MANUAL 1000XE ࡅ BEDIENUNGSANLEITUNG EXCALIBUR╘ MANUEL D’INSTRUCTIONS 5000 ╗ MANUAL DE INSTRUCCIONES ╙ MANUAL DE INSTRUCCIONES Single language version and parts diagrams can be down loaded from www.keencut.co.uk Versionen in den einzelnen Sprachen und Schaubilder der Teile sind als Download auf www.keencut.co.uk erhältlich. La version et les schémas des pièces en une seule langue peuvent être téléchargés depuis www.keencut.co.uk MyBinding.com En www.keencut.co.uk puede descargar versiones en idiomas 5500 NE Moore Court individuales y diagramas de piezas. Hillsboro, OR 97124 È possibile scaricare le versioni nelle singole lingue e i disegni delle Toll Free: 1-800-944-4573 parti su www.keencut.co.uk Local: 503-640-5920 KC-EX FEB09 1 Contents 1 2 Packing list 2.1 Unpacking your machine 3 Assembly 3.1 Adjusting the Legs 3.2 Preparing to fit the Squaring arm 3.3 Fitting the Squaring arm 3.4 Fitting the Wall mounting bracket 3.5 Fitting the Free standing kit 3.6 Fitting the Backing panels 4 Squaring 4.1 Checking your machine for squareness 4.2 Adjusting the squareness 5 Calibration 5.1 Calibrating the vertical square 5.2 Calibrating the Squaring arm scale 5.3 Fitting the Sight-line strip 6 Operation 6.1 Using the Clamp 6.2 The Multi-tool cutter and the Counterbalance – 5000 6.2.1 The Cutting blade 6.2.2 The Scoring blade 6.2.3 The Glass cutter 6.3 The Twin wheel cutter – 5000 7 Maintenance 7.1 General maintenance MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920 2.1 Unpacking your Machine 2.1 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920 ቫ ቮ ቭ ቯ ᕊ ተ ቱ NOTE: When lifting the main body from the box, DO NOT lift using the black handles on the cutters.
[Show full text]
4 Tweezers 0510:Layout 1 17/6/10 16:32 Page 85
4_Tweezers_0510:Layout 1 17/6/10 16:32 Page 85 4 - Tweezers and small tools We offer a comprehensive range of high quality tweezers and small tools, many of which are from well known and highly respected manufacturers. Tweezers Among the wide selection of tweezers offered are those manufactured Medical grade tweezers are manufactured from a special stainless steel by Dumont® in Switzerland. This well-established company manufactures alloy composed of C, Mn, Cr, Mo and V that provides an excellent tweezers of the very highest quality. resistance to corrosion and a good resistance to salt. Although not as hard as carbon steel, this alloy supports temperatures of approximately In order to assist in the selection of suitable tweezers for any particular 400 °C and is suitable for autoclave sterilisation at 180 °C. application, we have included information about the materials used and the tip profile and dimensions. Medical mirror polished tweezers are manufactured from the above alloy and the main part of the tweezer is mirror polished which gives We offer three grades of tweezers: increased resistance to corrosion during sterilisation in an autoclave. The tips are given a micro-matt finish to minimise reflections which • High precision grade is suitable for most laboratory and fine might hinder visibility. engineering use. ® • Biology grade has the thinnest tips, and is used for the most Dumoxel is the trade name for an anti-magnetic grade of stainless demanding laboratory applications including microscopic work. steel. This alloy is composed of C, Cr, Ni, Mo and Cu which makes the tweezers marginally softer than other stainless steels.
[Show full text]
Working on Site
VETRITE – WORKING ON SITE Thanks to how easy Vetrite is to work, it is possible to work and cut Vetrite not only in the factory using the designated machines but also directly on the construction site, so to easily obtain Vetrite slabs ready to lay and having the desired dimensions and features. On-site treatment of Vetrite must be performed using adequate equipment that complies with the regulations that apply where the treatment takes place. Follow the instructions included in the installation manual for Vetrite (available on Vetrite’s website: https://www.sicisvetrite.com/ ). This document provides the guidelines to follow when performing some of the most common on-site treatments that can be performed onto Vetrite. This document must be necessarily read alongside the above-mentioned installation manual for Vetrite, the indispensable tool for whomever wishes to work, move, stock or lay Vetrite. MANUAL CUTTING The simplest way to manually cut Vetrite is to use a glass cutter. Being Vetrite made of two glass slabs, the manual cut must be performed on one side of the slab and then on the other. Perform the cut by dragging the glass cutter along the desired trajectory of the cut. Use a geometric square for glass in order to obtain a straight cut. In case of a particularly long cut, lubricate the trajectory of the cut by covering it in oil for glass (like that contained inside the glass cutter) so that performing the cut will result more fluid and overall easier. 1 The manual cut must be performed in one single firm movement.
[Show full text]