DOCSLIB.ORG

Pipe Cutters

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pipe Cutters NEW PRODUCTS IMPROVED 4991 CLOSE QUARTERS TUBING CUTTER Page 31 Phone (440) 998-2788 8:00 a.m. to 4:30 p.m. Eastern Standard Time BOLT CUTTERS Page 58 Toll-Free 1-800-321-7950 Fax (440) 992-2925 STAINLESS STEEL TUBING CUTTERS Page 33 Web www.wheelerrex.com E-mail [email protected] Follow us on Facebook, Twitter & LinkedIn HYDRANT NUT Page 51 BENCH VISE To expedite telephone Page 42 orders, please have your customer number ready. We accept Visa, Mastercard & Discover. Wheeler manufacturing Division of Rex international U.S.A., inc. 3744 jefferson road 373080 GAS HYDROSTATIC TEST PUMP Ashtabula, oh 44004 Page 26 32450 PNEUMATIC HYDROSTATIC TEST PUMP Page 29 363060 GAS FIRE HOSE TESTER 701440 HOT TAP ARBOR ASSEMBLY Page 29 Page 46 j'7OƒOoƢźƢMȼÌ̤¼·y°ƢY¼¼°Ƣ yÒy°¼ƢźƢ*ÌÌØƢIJ TABLE OF CONTENTS Pipe Cutters Pages 4–9 Trash Pumps Page 30 Pipe Freezing Kit Page 45 sManual & Ratchet Pipe Cutters s2" and 3" Trash Pumps sPipe Freezing Kit sSoil Pipe Coupling Torque Wrenches s4" Trash Pump sReplacement Polar Spray sHydraulic Pipe Cutters & Fluid sMudsucker Pumps Drilling and Tapping Tools Pages 46–49 sReplacement Cutter Chains Tube Tools Pages 31–34 sInternal Cast Iron Pipe Cutter sHot Tap System & Accessories sSteel Pipe Cutters sAuto-C Cutters sDrill Taps sHinged Pipe Cutters sClose Quarters Cutter sTapping Fluid sPipe Cleaner/Scraper sTube Brushes sPortable Hole Cutters sPipeMaster and Accessories sRatch Cuts and Kits sHole Cutter Systems & Shells sTube Tools sEarthworm Hydro-Drill Grooving & Fabrication Pages 10–12 sStainless Steel Tube Cutters sPipe Slices & Accessories sManual Roll Groover sInner/Outer Reamer sMini Pipe Slice & Accessories sPortable Roll Groovers sDeburring Tool Valve Exercisers Pages 50–51 sHydraulic Roll Grooving Machines sHammerhead Flaring Tool sHydraulic Roll Grooving Accessories sRerounding Tools and Kit sValveMaster sOrbital Pipe Machine sPortable Valve Exercisers Replacement Cutter Wheels Page 35 sMantis™ Band Saws sRising Stem & Hand Wheel sReplacement Cutter Wheels sHydrant Nut 12R Style Replacement Dies sTelescoping Valve Keys and Die Heads Pages 13–14 Glass Tube Cutters Page 36 sManual Ratchet Threader Sets Wrenches, Pliers & sCutters for glass tubing sMini Power Drives Fastening Tools Pages 52–55 sHand Oiler Plastic Pipe Tools Pages 37–41 sPipe Wrenches s12R Style Dies and Die Heads sGripMaster sSnippers sSpud Wrench Pipe Threading Machines Pages 15–17 sBlade Sharpener sDouble-Up Wrenches sHand Saws sSidekick Pipe Threader sHeavy Duty Deep Sockets II sCable Saws sPower Threading Machines sTwinTite™ sBevelers – Hand and Powered sCutting and Beveling Machines sCoupling Torque Wrenches sPipe Hogs® and Kits sNo-Hub® Coupling Wrenches Threading Accessories sFitting Savers and Kits sBasin Wrench & Cutting Fluid Pages 18–23 sInternal Plastic Cutters sStrap Wrenches sChamfering Tools sThreader Carts sValve Wheel Wrenches sGuillotine Pipe Cutters sNipple Attachments sHydrant Wrenches s841 Threader Stand Pipe Working Tools Pages 42–43 sChain Wrench sThreading Fluid sUtility Pliers sDies and Die Heads sTripod Vise Stand sBench Vise Crimping Tools Pages 56–57 Universal Replacement Dies Page 24 sFolding Tripod Pipe Supports sPEX Crimping Tools sUniversal Die Head sYoke Vises sPipe Dies for Universal Heads sFloor Pipe Vises Miscellaneous Tools Page 58 sPipe Puller sBolt Cutters Hydrostatic Test Pumps Pages 25–29 sPlug Poppers sHack Saws sPipe Dollies sManual Pumps s6-in-1 Screwdrivers sGas Powered Pumps Shut Off Tools Page 44 sO.D. Tape sElectric Powered Pumps sPneumatic Powered Pumps sFor Soft Copper Water Lines Distributor Marketing Aids Page 59 sFire Hose Testers sFor Plastic, Water and Gas Lines sVacuum Test Assembly Product Index Pages 61–66 3 PIPE CUTTERS 590 AND 591 MANUAL PIPE CUTTER Wheeler Service (Std) Shipping # WT Soil Pipe XH Soil Pipe No-Hub® Tile / Clay Weight 1 1 1 590-6 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–6" (100mm–150mm) 23 lbs. (10.5kg) INVENTED BY: 1 1 1 590-8 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–8" (100mm–200mm) 25 lbs. (11.5kg) 1 1 1 590-10 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–10" (100mm–250mm) 28 lbs. (12.7kg) 1 1 1 590-12 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–12" (100mm–300mm) 28 lbs. (12.7kg) 1 1 1 590-15 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–15" (100mm–375mm) 29 lbs. (13kg) 1 1 1 591-6 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–6" (100mm–150mm) 24 lbs. (11kg) 1 1 1 591-8 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–8" (100mm–200mm) 25 lbs. (11.5kg) 38 Replacement Adjustment Screw Assembly Includes Ratchet 490 AND 491 RATCHET PIPE CUTTER INVENTED BY: Wheeler Service (Std) Shipping # WT Soil Pipe XH Soil Pipe No-Hub® Tile / Clay Weight 1 1 1 490-6 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–6" (100mm–150mm) 18 lbs. (8.5kg) 1 1 1 490-8 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–8" (38mm–200mm) 4"–8" (100mm–200mm) 19 lbs. (8.6kg) 1 1 1 490-10 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–8" (38mm–200mm) 4"–10" (100mm–250mm) 20 lbs. (9.5kg) 1 1 1 490-12 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–8" (38mm–200mm) 4"–12" (100mm–300mm) 22 lbs. (10kg) 1 1 1 490-15 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–8" (38mm–200mm) 4"–15" (100mm–375mm) 23 lbs. (10.5kg) 1 1 1 491-6 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–6" (38mm–150mm) 4"–6" (100mm–150mm) 18 lbs. (8.5kg) 1 1 1 491-8 1 /2"–6" (38mm–150mm) 1 /2"–5" (38mm–125mm) 1 /2"–8" (38mm–200mm) 4"–8" (100mm–200mm) 19 lbs. (9kg) 1 6519 /2" Square Male/Female Drive Ratchet .................................................... 2 lbs. (.9kg) 700669 Replacement Drive Screw Assembly Close-up view of “captured screw” 3990 XH RATCHET PIPE CUTTER INVENTED BY: Wheeler Service (Std) Cast Iron Shipping # WT Soil Pipe XH Soil Pipe Tile / Clay Water Class 22 Weight 3990-6 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) 21 lbs. (9.5kg) 3990-8 2"–8" (50mm–200mm) 2"–8" (50mm–200mm) 4"–8" (100mm–200mm) 2"–6" (50mm–150mm) 23 lbs. (10.5kg) 1 6520 /2" Square Female Drive Ratchet – U.S.A. Made ..................................... 2 lbs. (.9kg) 700919 Replacement Drive Screw Assembly SOIL PIPE COUPLING TORQUE WRENCH This durable “T-Handle” type torque tool with a contoured comfort-fit handle features a removable socket and a unique locking collar, which allows the tool to be used as an untorqued snug-up or back-off, as well as a conventional torque tool. With the locking collar retracted, the tool torques to the right (tightening), while ratcheting to the left. When proper torque value has been achieved, the mechanism slips internally and over- tightening is impossible. 5 1977 T-Torque for tightening /16" coupling nuts to 60 in. lbs. ............................. Weight 1 lb. (.5kg) 5 1980 T-Torque for tightening /16" coupling nuts to 80 in. lbs. ............................. Weight 1 lb. (.5kg) 3 1981 T-Torque for tightening /8" coupling nuts to 80 in. lbs. .............................. Weight 1 lb. (.5kg) 5 3 1982 T-Torque for tightening /16" & /8" coupling nuts to 80 in. lbs. ................... Weight 1 lb. (.5kg) 5 Replaceable Socket 275410 /16" Replacement Socket 3 275818 /8" Replacement Socket 4 More Torque Wrenches available… see page 54. j'7OƒOoƢźƢMȼÌ̤¼·y°ƢY¼¼°Ƣ yÒy°¼ƢźƢ*ÌÌØƢIJ WHEELER-REX HYDRAULIC PIPE CUTTERS Wheeler-Rex Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated “snap” cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2"–3" minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. INVENTED BY: 2990 HYDRAULIC PIPE CUTTER Service Cast Iron Cast Iron Wheeler (Std) WT Water Class Water Class Shipping # Soil Pipe XH Soil Pipe Tile / Clay 22 26 Weight 2990-6 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) 2"–6" (50mm–150mm) NA 85 lbs. (39kg) 2990-8 2"–8" (50mm–200mm) 2"–8" (50mm–200mm) 2"–8" (50mm–200mm) 2"–6" (50mm–150mm) NA 87 lbs. (40kg) 2990-10 2"–10" (50mm–250mm) 2"–8" (50mm–200mm) 2"–10" (50mm–250mm) 2"–6" (50mm–150mm) NA 89 lbs. (41kg) 2990-12 2"–10" (50mm–250mm) 2"–8" (50mm–200mm) 2"–12" (50mm–300mm) 2"–6" (50mm–150mm) NA 92 lbs. (42kg) 2990-15 2"–10" (50mm–250mm) 2"–8" (50mm–200mm) 2"–15" (50mm–375mm) 2"–6" (50mm–150mm) NA 94 lbs. (43kg) 1630 Replacement Hydraulic Pump ............................................................ 22 lbs. (48.5kg) INVENTED BY: 3890 HYDRAULIC PIPE CUTTER Service Cast Iron Cast Iron Wheeler (Std) WT Tile and Water Class Water Class Shipping # Soil Pipe XH Soil Pipe Concrete 22 26 Weight 3890-12 4"–12" (100mm–300mm) 4"–12" (100mm–300mm) 4"–12" (100mm–300mm) 4"–12" (100mm–300mm) 4"–10" (100mm–250mm) 152 lbs. (69kg) 3890-15 4"–15" (100mm–375mm) 4"–15" (100mm–375mm) 4"–15" (100mm–375mm) 4"–12" (100mm–300mm) 4"–10" (100mm–250mm) 163 lbs.
Load more

Recommended publications
  • UP-6178F Lab Tape Casting Machine
    UP-6178F Lab Tape Casting Machine Description: Laboratory tape casting machine is suitable for mixing, plasticizing and extruding of TPU, engineering plastics, modified plastics, masterbatch and other high polymer. It has the characteristics of uniform dispersion, plasticizing and coloring, filling and modification. It is mainly used in the fields of casting film product forming, casting material formulation development, casting material performance research, etc., such as transporting materials to casting machine to produce casting film products, etc. Suitable for laboratory test and quality control, teaching research and small-scale production. Introduction: This machine is single layer casting and sheet extrusion equipment. It is suitable for the testing and evaluation of the casting performance of polymer materials, the research and development of new product formula, etc. it is the first choice of equipment for major manufacturers and scientific research institutions. Application scope: 1. Test and evaluation of casting performance of polymer materials 2. R & D of new product formula 3. Optimization of production process parameters 4. Small scale production of thin film 5. Quality control Parameters: Single screw extruder: 1. Screw: ￠ 20mm PE, EVA, special screw 2. Screw speed: 0-95rpm frequency conversion speed regulation 3. Length diameter ratio: 1:28 4. Screw material: 38CrMoAl chrome molybdenum alloy, surface treated by tempering, nitriding, chrome plating, polishing and ultra precision grinding, hardness HRC 5. 55 ~ 60, roughness Ra ≤ 0.4 μ m, nitriding layer depth ≥ 0.6mm 6. Barrel material: 38CrMoAl chrome molybdenum alloy, surface treated by tempering, nitriding, chrome plating, polishing and ultra precision grinding, hardness HRC 7. 55 ~ 60, roughness Ra ≤ 0.4 μ m, nitriding layer depth ≥ 0.6mm 8.
    [Show full text]
  • Specialty Tools
    Specialty Tools www.ktoolinternational.com | 1.800.762.6002 57 Specialty Tools Tow Straps Heavy-duty nylon web construction with reinforced stitching Available with looped end or forged hooks. Abrasion and cut resistant. Strongest, longest-lasting webbing tow straps on the market. Meet or exceed all DOT specifications Styles and sizes available: KTI73801 - Forged hooks 7,000 lb. capacity 2” width 10’ length KTI73802 - Forged hooks 10,000 lb. capacity 2” width 15’ length KTI73803 - Forged hooks 10,000 lb. capacity 2” width 25’ length KTI73810 - Looped ends 15,000 lb. capacity 2” width 20’ length KTI73811 - Looped ends 30,000 lb. capacity 3” width 20’ length KTI73812 - Looped ends 30,000 lb. capacity 3” width 30’ length Heavy-duty Tow Straps Heavy duty nylon web construction with reinforced stitching and looped ends. Abrasion and cut resistant. Strongest, longest-lasting webbing tow straps on the market. Meet or exceed all DOT specifications. Sizes available: KTI73813 - Looped ends 40,000 lb. capacity 4” width 30’ length KTI73814 - Looped ends 60,000 lb. capacity 6” width 30’ length Stretch Cords Braided cover prevents abrasions and provides added durability. Vinyl covered hooks prevents scratches. Designed for professional use. Sizes available: KTI73830 - General purpose 3/8” diameter 18” length Yellow 10-pack KTI73831 - General purpose 3/8” diameter 24” length Yellow 10-pack KTI73832 - General purpose 3/8” diameter 30” length Yellow 10-pack KTI73833 - General purpose 13/32” diameter 40” length Yellow 10-pack KTI73834 - General purpose 13/32” diameter 48” length Yellow 10-pack Rubber Straps Sizes available: KTI73849 - EPDM Rubber Strap 3/8” wide 15” length 22” max stretch 10-pack KTI73850 - EPDM Rubber Strap 3/8” wide 21” length 31” max stretch 10-pack KTI73851 - EPDM Rubber Strap 3/8” wide 31” length 46” max stretch 10-pack Tie Downs & Straps Styles and sizes available: KTI73862 - Ratcheting Tie Down (endless loop) 900 lb.
    [Show full text]
  • Adjustable Glass Bottle Cutter by Sbanas on April 25, 2015
    technology workshop craft home food play outside costumes Adjustable Glass Bottle Cutter by sbanas on April 25, 2015 Table of Contents Adjustable Glass Bottle Cutter . 1 Intro: Adjustable Glass Bottle Cutter . 2 Step 1: Materials . 2 Step 2: Cutting And Sanding . 3 Step 3: Attach Corners . 3 Step 4: Cutting Holes And Slots . 4 Step 5: Glass Cutter . 5 Step 6: Finishing . 7 Step 7: First Try . 8 Step 8: Polyurethane . 9 Step 9: Finished . 9 Advertisements . 10 http://www.instructables.com/id/Adjustable-Glass-Bottle-Cutter/ Author:sbanas I'm 16 in Waco, Texas. I love being outside and building things, I can build anything with just a few ideas and tools. Intro: Adjustable Glass Bottle Cutter I have wanting to make a bottle cutter for a while now, just because I really like the idea of making glasses from bottles. I found a lot of designs online, but one thing they all had in common, is that none of them are adjustable. Now I want to be able to cut different types and sizes of bottles, so I came up with this design that can be adjusted for different bottles. Cutting glass bottles can be really fun, and drinking out of a glass you made is also satisfying. Plus you get to repurpose an ordinary glass bottle into something new and useful. Step 1: Materials For this project I used: - 1x4 Scraps - Glass Cutter - Polyurethane - 1/4"x2" Bolts - Wing Nuts - Epoxy - Wood Glue - Screws - Glass Bottles http://www.instructables.com/id/Adjustable-Glass-Bottle-Cutter/ Step 2: Cutting And Sanding After I decided how I was going to build it, I cut out the pieces and sanded them.
    [Show full text]
  • Portable Hand Power Threader 1/2” - 2”
    PORTABLE HAND POWER THREADER 1/2” - 2” Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. ITEM NUMBER: 3306601 Standard Equipment Specifications: PT ® Portable Hand Power Drive Threading Capacity: Pipe 1/2" through 2" •Six Die heads with Dies: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” Motor Type: Universal •Support Arm Power: 1000 Watts •Sturdy Plastic Carrying Case Volts: 110V / 60Hz. Switch: heavy load, with safety lock. Reduction Gearbox: Cast aluminum alloy. Body: Hardened fiberglass plastic shell. Length: 19.5” Weight: 14 lbs. FOR PRODUCT OR WARRANTY INFORMATION CONTACT ARGCO - PIPINGTOOLS DIVISION PHONE: 800-854-1015 • FAX: 760-727-3270 2610 COMMERCE WAY • VISTA, CA 92081 www.pipingtools.com PT ® POWER HAND THREADER General Safety Information • When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electrical shock. Read and understand all instructions. • Use only three-wire extension cords which have three-prong Failure to follow all instructions listed below may grounding plugs and three-pole receptacles which accept the tool’s result in electric shock, fire, and/or serious plug. Use of other extension cords will not ground the tool and personal injury. increase the risk of electrical shock. • Use proper extension cords. (See chart.) Insufficient conductor size Work Area Safety will cause excessive voltage drop and loss of power. • Keep your work area clean and well lit.
    [Show full text]
  • University Micrdfilms International 300 N
    INFORMATION TO USERS This reproduction was made from a copy of a document sent to us for microfilming. While the most advanced technology has been used to photograph and reproduce this document, the quality of the reproduction is heavily dependent upon the quality of the material submitted. The following explanation of techniques is provided to help clarify markings or notations which may appear on this reproduction. 1. The sign or “target” for pages apparently lacking from the document photographed is “Missing Page(s)” . If it was possible to obtain the missing page(s) or section, they are spliced into the film along with adjacent pages. This may have necessitated cutting through an image and duplicating adjacent pages to assure complete continuity. 2. When an image on the film is obliterated with a round black mark, it is an indication of either blurred copy because of movement during exposure, duplicate copy, or copyrighted materials that should not have been filmed. For blurred pages, a good image of the page can be found in the adjacent frame. If copyrighted materials were deleted, a target note will appear listing the pages in the adjacent frame. 3. When a map, drawing or chart, etc., is part of the material being photographed, a definite method of “sectioning” the material has been followed. It is customary to begin filming at the upper left hand corner of a large sheet and to continue from left to right in equal sections with small overlaps. If necessary, sectioning is continued again—beginning below the first row and continuing on until complete.
    [Show full text]
  • Small Tools, Office Supplies & Equipment And
    SMALL TOOLS, OFFICE SUPPLIES & EQUIPMENT AND CONSUMABLES & EXPENDABLES LIST This list is provided as a guide and is not deemed to be a full and complete list. Page 1 of 7 2107686.1 PART I SMALL TOOLS, OFFICE SUPPLIES & EQUIPMENT LIST The following schedule of small tools, office supplies and equipment is included as a guide in defining and/or classifying items as small tools, office supplies and equipment, and is not deemed to be a full and complete list. • Concrete Buddie - Hand A C • Consumables – paper (including letterhead), pens, pencils (wood & • Adapter – socket drive • Cabinet – File – all mechanical), erasers, white out, staples, • Adding Machine • Cable – Welding paper and bulldog clips, knives and • Adzes • Calculators blades, scissors, ruler and other straight • Agitators – paint – handheld, desk – all edges, scales, file folders and hangers, • Air Hoses • Calliper – Inside 6” white, chalk and peg boards, markers, • Aligner – metal door frame • Calliper – Outside 6” tape dispensers and tape, computer disks, push pins, binders, elastics • Aligner – pipe, lever type • Calliper – Vernier 12” • Cooler • Anvil • Cameras – video, Polaroid and still with • Augers lenses and tripods – all – Water, electric • • Axes Car mover – Construction • Carrier • Creeper – Auto mechanic B – Brick, timber • Cutter – Angle iron • Cutter – BX armor • Band-it-tool – Hand • Cutter – Bolt all • Banding Machine • Cart – Welding, cylinder trucks • Cutter – Cable • Bar – crow, wrecking, pitch point • Caulking gun • Cutter – Hydraulic with heavy duty • Belts – safety, pole climbing • Caulking irons cutter head • Bender – conduit pipe, rebar, sheet • Cement, masonry jointing tools • Cutter – gasket, machine, vise mount or metal, tubing • Chains – Log and cable hand • Binder/Cinch – load and • Chain – Measuring, complete with • Cutter – Pipe all chains/belts/cables reducer - 100 ft.
    [Show full text]
  • Safety and Operating Manual
    SAFETY AND OPERATING MANUAL PIPE THREADING MACHINE MODEL NO. 250 1” Capacity Please record your machine Model No. and Serial No. which are located on nameplate. Model No. Serial No. WARNING: For your own safety and effective operation, read this Safety and Operating Manual carefully and completely before assembling and operating this unit. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. Store this manual on your hand Save this manual for future reference CONTENTS Safety Information ・・・・・・・・・・・・・・・・・・・・・・・ 3 Parts Name ・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 Description, Specification and Standard Equipments・・・・・・・・ 7 Preparing for Operation ・・・・・・・・・・・・・・・・・・・・ 8 1. Machine Mounting ・・・・・・・・・・・・・・・・・・・・・・・ 8 2. Machine Inspection ・・・・・・・・・・・・・・・・・・・・・・・ 8 3. Machine and Work Area Set-Up ・・・・・・・・・・・・・・・・・ 9 4. Cutting Oil Lubrication ・・・・・・・・・・・・・・・・・・・・ 10 Machine Operation・・・・・・・・・・・・・・・・・・・・・・・ 11 1. Installing and Removing Pipe ・・・・・・・・・・・・・・・・・ 11 2. Cutting Pipe・・・・・・・・・・・・・・・・・・・・・・・・・・ 12 3. Reaming Pipe ・・・・・・・・・・・・・・・・・・・・・・・ 12 4. Threading Pipe ・・・・・・・・・・・・・・・・・・・・・・・ 13 Adjustment of Die Head ・・・・・・・・・・・・・・・・・・・・ 14 1. Replacement Dies ・・・・・・・・・・・・・・・・・・・・・・・ 14 2. Selection of Size ・・・・・・・・・・・・・・・・・・・・・・・ 14 3. Adjustment for Thread O.D. ・・・・・・・・・・・・・・・・・ 15 4. Adjustment for Thread Length ・・・・・・・・・・・・・・・・・ 15 Maintenance Instruction ・・・・・・・・・・・・・・・・・・・・ 16 1. Lubrication ・・・・・・・・・・・・・・・・・・・・・・・・・・ 16 2. Carbon Brush Replacement・・・・・・・・・・・・・・・・・・・・ 16
    [Show full text]
  • Essential Tools for Contractors
    2016 CONTRACTOR RESOURCE ESSENTIAL PRODUCTS FOR CONTRACTORS Insulated Tools Holemaking Test & Measurement Safety Equipment Cable & Bolt Cutters Wire Pulling & Conduit Tools Power Tool Accessories Work @ Height Pliers Torque Wrenches / Screwdrivers These days, it can be hard to find companies that make TABLE OF CONTENTS products you can count on. But that’s exactly what you’ll get from Pliers with Tether Ring 1 Klein Tools. We don’t just make great products, we make great products Fish Tapes, Lubricants & Accessories 2 that stand up to the demands of the Conduit Benders, Fish Rods & Accessories professionals who use them every day. 3 Because our standards are as high as Low Voltage Wire Pulling yours, we demand that every product we 4 offer delivers all the performance, Holemaking 5 durability and precision that you need to get the job done right. Test & Measurement and Accessories 6-7 And by using only the highest quality Electrical Testers materials, superior workmanship, and 8 keeping our manufacturing as close to Torque Tools 9 home as we can, we’re able uphold those rigorous standards. Power Tool Accessories 10-11 Klein isn’t just the name of our company, Personal Protective Safety Equipment / Gloves it’s also our family name, so we have to 12-14 be proud of everything we make. And Insulated Tools 15-16 since we’re an American company that’s been family-owned and family-run, since Cable Cutters 17 1857, you know you can count on us to be here tomorrow. Bolt Cutters 18 So buy a Klein tool and you’ll know what Reference Guide 19-20 all the professionals know…when you pick up a Klein, it’ll never let you down.
    [Show full text]
  • Download the Ripper ™ Owner's Manual
    Owner’s Manual Model #R1 Manufactured by: Rescue 42, Inc. PO Box 1242 Chico, CA 95927 Phone: (888) 42-RESCUE www.Rescue42.com © Copyright 2019 Rescue 42, Inc. Part # R1-INSTR-V1 Introduction Thank you for purchasing The Ripper™. The Ripper™ is designed to cut vehicle laminated glass (LG) windshields and side windows to access trapped or non-compliant subjects and injured or dying patients. Please read this manual in its entirety before using The Ripper™. Safe Operations and Warnings - Read Before Using WARNING: TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS OWNER’S MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH. Cutting LG generates glass chips and fine dust/powder. Users must wear their agency-specified PPE, which should include protective clothing, gloves, eye and possibly respiratory protection. LG dust (non-crystalline glass dust or Amorphous Silica Dioxide) is only an irritant dust and is not considered to be hazardous. While most glass fragments will remain on the outside of the glass pane, some will fall inside. While often not possible, attempt to protect occupants from fragments. Although the blades do not appear or feel sharp to the touch, please note that the shear blade oscillates like a scissor to cut LG. Do not place your fingers or any parts of your body in or on the blades while the battery is attached to the cordless Impact Driver used to power the tool. Do not use The Ripper™ for cutting materials other than Laminated Glass (LG); you may damage the tool and will void the warranty.
    [Show full text]
  • Experimental Study of the Subsystems in a Microscale Additive Manufacturing Process
    JOM, Vol. 71, No. 3, 2019 https://doi.org/10.1007/s11837-018-3223-3 Ó 2018 The Minerals, Metals & Materials Society SOLID FREEFORM FABRICATION Experimental Study of the Subsystems in a Microscale Additive Manufacturing Process NILABH K. ROY, 1 DIPANKAR BEHERA,1 OBEHI G. DIBUA, 1 CHEE S. FOONG, 2 and MICHAEL CULLINAN 1,3 1.—Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX, USA. 2.—NXP Semiconductors, Austin, TX, USA. 3.—e-mail: [email protected] High-throughput manufacturing of complex 3D architectures for microscale products such as microelectronics is limited by the resolution of existing additive manufacturing processes. This paper presents experimental testing and validation of the major subsystems in a microscale selective laser sin- tering (l-SLS) process that is capable of fabricating true-3D metallic micro- architectures with microscale feature size resolutions. In l-SLS, the part quality and throughput of the sintering process are largely determined by the precision, accuracy, and speed of the subsystems including: (1) the optical subsystem, (2) the global positioning mechanism, (3) the XY nanopositioning stage, and (4) the powder bed dispensing system. This paper shows that each of these subsystems can maintain the sub-micrometer precision and accuracy required to produce metal parts with microscale resolutions. Preliminary sintering results with optimized process parameters show the potential of the l-SLS process to fabricate complex metal parts with sub-10- lm resolution at high rates. INTRODUCTION vertical layer-by-layer integration of conducting and insulating layers. Conventional interconnect Additive manufacturing (AM) has been driving fabrication involves several steps including lithog- complex and innovative product design in the raphy (optical lithography/electron beam lithogra- electronics, biomedical, and aerospace industries phy), deposition, etching, and diffusion.
    [Show full text]
  • 8090 Operation Booklet
    50/60Hz PIPE THREADING MACHINE 8090 OPERATION MA取N扱U説A明L書 Be sure to read this Operation Manual before using the machine. - Note - - Be sure to hand this operation manual to the user. - To ensure safe and efficient use, read the manual thoroughly before using the machine. - Be sure to keep the manual where the operator can refer to it whenever necessary. Date of purchase: Year Month Distributor: Thank you for purchasing a WHEELER REX pipe threading machine. Precision-engineered for cutting, reaming, threading and, with our optional Portable Groovers, grooving steel and stainless steel (option) pipes, our product will give you years of reliable service if you simply follow the instructions in this manual carefully. Before using the machine, therefore, make sure you read the manual from start to finish, paying particular attention to the Safety Considerations on pages 1 & 2 and Precautions on pages 3 & 4. To avoid accident and injury, never use the machine for any purposes other than those described in this manual. Should you need further advice, contact your distributor or WHEELER REX. CONTENTS Safety Considerations .............................................................................. 1 Precautions .........................................................................................3 Main Parts, Specifications, Standard Accessories, Usage.....................................5 Getting Ready 1. Transportation ..............................................................................6 2. Machine set up .............................................................................6
    [Show full text]
  • Tools for Tile & Stone Catalog
    TOOLS FOR TILE & STONE CONTRACTORS CUTTING, PROFILING & POLISHING TH Since 1986 Celebrating 35 Years Providing Better Solutions to the Professional VERSION 6 CONTACT US WELCOME Alpha Professional Tools® was founded in 1986 and has become a leading manufacturer of quality tools for professionals in the natural/engineered stone, porcelain, ceramic, glass, construction, marine and automotive industries. Alpha® provides the best products for cutting, drilling, shaping and polishing all types of materials. In addition to providing the best products in the industry, Alpha Professional Tools® offers a variety of services to support their products. Company Contact Information: Headquarters & 16 Park Drive Training Center: Franklin, NJ 07416 Hours of Operation (EST): 8:30 a.m. - 5:00 p.m. Telephone No: 201-337-3343 Toll-Free No: 800-648-7229 Fax No: 201-337-2216 Toll Free Fax No: 800-286-0114 E-mail Orders to: Contact Us: [email protected] www.alpha-tools.com [email protected] [email protected] Follow Us: Sales Contacts by Territory – [email protected] Caribbean 201-337-3343 Ohio Valley 440-364-3759 Canada 519-546-9861 Pacific 800-648-7229 International 201-337-3343 South 480-848-6808 Midwest 630-849-7105 Southeast 678-977-1147 Northeast 973-830-7681 Southern CA 925-428-1292 Northern CA 925-428-1292 TABLE OF CONTENTS TOOLS STONE CUTTER • ESC-125, Wet Stone Cutter .......................................................................................2 • Countertop Trim Kit ....................................................................................................4
    [Show full text]