TELEPORT ™ Z-Wave® Enabled Universal A/V Remote Control User Manual for Model WDHC-20 TABLE of CONTENTS

TELEPORT ™ Z-Wave® enabled Universal A/V Remote Control User Manual For Model WDHC-20 TABLE OF CONTENTS

Introduction ...... 4 Features and Functions ...... 5 Key Charts ...... 6 Device Mode Table ...... 8 Installing Batteries...... 8 Programming Device Mode Control ...... 9 Setting Up a Combo Unit ...... 11 Searching for Your Code ...... 12 Revealing Device Codes...... 13 Learning Feature...... 13 Learning Precautions ...... 13 Programming a Learned Key...... 14 Deleting a Single Learned Key...... 15 Deleting All Learned Keys in a Speciﬁc Mode. . . 15 Changing Volume Lock ...... 16 Locking Volume Control To One Mode (Global Volume Lock) ...... 16 Unlocking Volume Control for a Single Device (Individual Volume Unlock) ...... 17 Unlocking All Volume Control (Global Volume Unlock) ...... 17 Macro Key Basics ...... 18 Programming a Macro Key ...... 18 Clearing a Macro Key ...... 18 Re-Assigning Device Mode Keys...... 19 Creating a Z-wave Network ...... 20 Adding a Node to your Network...... 21 Deleting a Node from your Network...... 21 Setting Up Z-wave Scenes ...... 22 Adding a Node to a Scene...... 22 Removing a Node from a Scene ...... 22 Deleting a Scene ...... 23 Activating Z-Wave Scenes...... 23 Transferring Network and Scene Information to a Secondary remote ...... 24 Transferring Network Information Only to a Secondary remote ...... 25 Primary Controller Shift ...... 25 Receive Controller Copy...... 26 Z-Wave Network Reset ...... 27 Z-Wave Network Re-Discovery ...... 27 Removing a Failed Node from the Network ...... 28

2 Clearing Custom Programming ...... 28 Troubleshooting ...... 29 FCC Notice ...... 30 Additional Information...... 30 Manufacturer’s Code ...... 31 Setup Codes for Audio Ampliﬁers...... 31 Setup Codes for Audio Receivers...... 32 Setup Codes for Audio Accessories ...... 35 Setup Codes for Cable Boxes/Converters . . . . . 35 Setup Codes for CD Players ...... 36 Setup Codes for DBS...... 37 Setup Codes for DVD Players ...... 38 Setup Codes for DVD/PVR Combos ...... 42 Setup Codes for Home Automation ...... 43 Setup Codes for Satellite Receivers ...... 43 Setup Codes for DVR/PVR Systems ...... 46 Setup Codes for TVs ...... 47 Setup Codes for TVs (DLP) ...... 55 Setup Codes for TVs (LCD)...... 55 Setup Codes for TVs (Plasma) ...... 57 Setup Codes for TV/DVD Combos ...... 59 Setup Codes for TV/VCR Combos ...... 61 Setup Codes for VCRs ...... 63 Setup Codes for Video Accessories ...... 67

3 INTRODUCTION

The Teleport™ Remote Control has sophisticated technology which allows you to consolidate up to four of your original home entertainment remote controls into one easy-to-use product.

Teleport™ lets you control individual Z-Wave® devices or groups of devices by using scenes. For example, you can turn on and off your lights or you can set-back your thermostat and lower your window shades at the same time. Teleport™ will also give you the capability to do macro commands such as when you press play for your DVD player, your lights dim down and the window shades lower or, as another example, if you pause the DVD player the lights could dim up half-way; stop the DVD player and the lights turn on fully. Use your imagination to meet your needs.

Teleport™ is packed with many other advanced features such as:

• Capability to fully control your cable or satellite set-top • Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) • Programmable Macro Keys to allow you to activate certain keys in a speciﬁc order • Volume Lock to lock volume controls to one mode or individual modes • Code Search to help program control of older or discontinued components • Code library for popular video and audio devices

Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the speciﬁc home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new Teleport™ remote control.

4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the Teleport™ Universal A/V Remote Control and then study the KEY CHARTS (on the next 3 pages) to learn how they function. To ﬁnd out what type of devices can be controlled by each device mode key after programming, see DEVICE TABLE on page 8.

5 Key Charts Key Function Use SETUP for all programming sequences. Also use to turn backlighting ON/OFF, if applicable. Press POWER once to turn ON or OFF a home entertainment device. Press TV, DVD/VCR, SAT or AMP once to select a home entertainment device to control. Also see DEVICE MODE TABLE on page 8. Each device mode key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Use ALL to control all lighting nodes in the network. Use INFO to display the current channel and program information. Use the CURSOR keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use OK to choose options, PPV events, and to tune to programs from the program guide. Use EXIT to exit out of your cable converters menu and guide. Use VOL+ (or VOL -) to raise (or lower) the audio volume. Use BRIGHT or DIM to control the brightness level of your lights. Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For ampliﬁers/receivers, use these keys to select the next higher (or lower) preset station. Use ON or OFF to turn your Z-Wave® compatible devices on or off.

Continued next page... 6 Key Function Press MUTE once to turn the sound OFF or ON. Press CANCEL to stop the transfer of info from a lighting node to your remote.

Press LAST once to recall the last channel.

Use to command your PVR/DVR to instantly skip forward in the program you are watching. Use to command your PVR/DVR to instantly skip backward in the program you are watching. Press LIVE to command your PVR.DVR cable box to return to watching live TV.

In all modes except SAT, use REW, PLAY, FFWD, STOP and PAUSE to control a VCR, DVD player, or a PVR (after selecting a desired device.) To record in the VCR mode, press REC twice. In the SAT mode, use these keys to control the DVR.PVR functions of the set-top box. Use the keypad numbers 1 - 9 and 0, to directly tune channels (e.g., 09.) For ampliﬁers/receivers, use the keypad numbers to select inputs 1 through 10.

Use TV/VID to select an input source.

Use ADD, REMOVE, DELETE, or SCENE to control your Z-Wave® compatible devices.

7 Device Mode Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 9 or “Setting Up a Combo Unit” on page 11. After programming, the Teleport™ Remote Control will able to control the following types of devices: Device Mode Controls these types of devices Audio Ampliﬁer, Tuner, Receiver, CD Player, Home Automation, or Miscellaneous Audio

Television

DVD Player, VCR, PVR

Satellite Receiver, Cable Box (Converter), or Video Accessory

Dedicated to Z-Wave® controls

INSTALLING BATTERIES

3 1. On the back of the remote control, push the tab and lift off the battery cover. 2. Locate the four (4) enclosed AAA batteries. Match the + and - marks with those in the battery case, then

insert them. Continued next page... 8 3. Align the keys in the cover with the keys in the case and press the cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g. TV.) If the batteries are inserted correctly, the LED (red light) will blink once.

NOTE: When batteries need replacement, the mode LED blinks 5 times with each key press. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings. PROGRAMMING DEVICE MODE CONTROL The Teleport™ Remote Control is pre-programmed to operate an RCA satellite receiver, TV, DVD player, and VCR. It can also control Z-Wave® certiﬁed devices, regardless of manufacturer. To control devices other than the default brands, perform the following steps; otherwise skip this section. NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and perform the instructions on “Setting Up a Combo Unit” on page 11. Also, refer to “Device Table” on page 8 to determine which devices can be programmed onto each device key. 1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disk.)

NOTE: Please read Steps 2 - 4 completely before proceeding. Highlight or write down the codes and device you wish to program before proceeding to Step 3. 2. On the remote control, press a mode key once (i.e., TV, DVD/VCR, SAT or AMP); it will blink once. Then press and hold SET UP until the selected mode key blinks twice. 3. Use the “Manufacturer’s Codes” (starting on page 31) to locate the type of device and brand name, then enter the ﬁrst ﬁve-digit code for your device. If performed correctly, the selected mode key will blink twice.

NOTE: If the selected mode LED emits one long, steady blink, the operation was not successful; repeat the sequence.

Continued next page... 9 4. Aim Teleport™ at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 -3, trying each code for your brand unit until you ﬁnd one that works. If it still does not respond, try searching for the code (see “Searching for Your Code” on page 12.)

NOTE: If the device does not have a PWR key, press the PLAY key ( .) 5. Repeat Steps 1 -4 for each device you want Teleport™ to operate. For future reference, record the codes which work in the boxes below.

VCR Code

Device Type:______DVD Code

Device Type:______AMP Code

Device Type:______SAT Code

Device Type:______TV Code

Device Type:______

10 SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/DVD Combo or a TV/VCR Combo, follow the Steps below: 1. Turn on your TV/DVD Combo and insert a DVD, or if TV/VCR Combo, insert a video cassette.

2. On Teleport™ press DVD/VCR once; it will blink once. Then press and hold SETUP until the DVD/VCR mode key blinks twice.

3. Use the “Manufacturer’s Codes” starting on page 28 to locate the brand name and enter the ﬁrst ﬁve-digit code for your combo device(for example, TV/VCR.) If you perform this procedure correctly, the DVD/VCR key will blink twice.

Note: If the DVD/VCR mode key did not blink twice after entering the last digit of the code, repeat steps 2 and 3 entering the same code again.

If the setup code that works for your combo device (for example, TV/DVD combo) also has a separate TV code listed, programming the separate TV code into Teleport™ is necessary for TV volume and channel control. See “Programming Device Control” on page 9.

4. Aim Teleport™ at your combo device (for example TV/DVD combo) and press PWR once. The device should turn off. If it does not respond, repeat steps 2 and 3, trying each code listed for your brand until one works. If it still does not PWR respond, try searching for the code. See “Searching for Your Code” starting on page 12.

5. For future reference, write down each working device code in the boxes below: TV/VCR or TV/DVD Code

TV Code (if used)

11 SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to the Teleport™ remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code using the following procedure:

NOTE: The example shown below is for a TV, to search for codes of other devices, substitute the appropriate mode key (e.g. DVD/VCR, AMP or SAT) for the device you are searching for. 1. Turn on your TV.

2. On Teleport™, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice.

3. Enter 991. The TV key will blink twice.

4. Aim Teleport™ at the TV and press PWR once.

5. Press and release the CH+ key continuously until the TV turns off.

NOTE: In the search mode, Teleport™ will send IR codes from its library to the selected device, starting with the most popular code ﬁrst.

6. Press PWR. The TV should turn on, then press SETUP to lock in the code.

NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to back through the codes. When the TV turns on press SETUP to lock in the code.

12 REVEALING DEVICE CODES If you have set up the Teleport™ remote control by searching for your device code (on the previous page), you may need to determine what the code is. The example below is for a TV, to reveal the codes of other devices, substitute the appropriate key (e.g. DVD/VCR, AMP or SAT) for the device you are searching for. 1. On Teleport™ press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice.

2. Enter 990 on the numeric keypad; the TV key will blink twice.

3. For the ﬁrst digit, press 1 once. Count the number of times the TV key blinks and write down the number in the leftmost TV Code box on page 10 (e.g., 3 blinks = 3.)

NOTE: If a code digit is 0, the selected mode key will not blink.

4. Repeat step 3 four more times for the remaining digits, except press 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit. Write each code in the box provided for TV codes on page 10. LEARNING FEATURE Teleport™ has many pre-programmed codes, but you may find there are one or more keys on the original remote which are not defined on Teleport™. As a convenience, Teleport™ includes a Learning feature so you can add functions that are unique to your original home entertainment remote (e.g., VCR tracking up or down.) Please note the following considerations: • Your original remote controls must be in working order for Learning to work properly. • Learned keys are mode-specific, so each one can store a unique function for each mode. • Do not use the following keys for learning: Device keys, SETUP, RECORD (•), Numeric keypad keys •Learning capacity is approximately 16 to 25 keys depending on the code being learned. • Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. • For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning.

Continued next page... 13 Programming a Learned Key NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 975 on the numeric keypad.

NOTE: If the LED emits one long, steady blink, the operation was not successful; repeat the sequence.

3. Press a mode key once (e.g.,TV, DVD/VCR, SAT, AMP) to assign a mode for learning.

4. Press the key on Teleport™ that is to learn the new code.

5. Place the Teleport™ remote control head-to-head (about 2 inches apart) from your original remote control. Locate the key on your original remote control that you want the Teleport™ remote control to learn.

6. On the original remote, press and hold the key you want Teleport™ to learn. The Teleport™ remote control LED will blink rapidly, then turn off. Continue holding the key on the original remote until the Teleport™ remote control LED blinks twice.

NOTE: If the LED on Teleport™ emits one long, steady blink, the operation was not successful; repeat the sequence. If the function is still not captured, press and hold SETUP to exit programming and review the “Learning Precautions” on the previous page. If needed, also see “Troubleshooting” on page 28. After review, start programming again at Step 1.

7. Repeat Steps 2 through 5 for another mode and/or key. To exit programming, press and hold SETUP.

Continued next page... 14 Deleting a Single Learned Key This process returns the LEARNED Teleport™ key to its original programming for the mode you select. You can also delete LEARNED programming by teaching a different function to the key. See “Programming a Learned Key” on page 14.

NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. On Teleport™ select the mode, containing the key to be deleted.

2. Press and hold SETUP until the last-selected mode key blinks twice.

3. Enter 976 on the numeric keypad.

4. Press a mode key once (e.g., TV, DVD/VCR, SAT, AMP.)

5. Press the key on Teleport™ containing the learned function to be deleted, twice. The remote will blink twice. 6. Repeat Steps 2 through 4 for another key. To exit programming, press and hold SETUP.

Deleting All Learned Keys in a Speciﬁc Mode

NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. On Teleport™ select the mode to be deleted.

2. Press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 976 on the numeric keypad.

3. Press a mode key twice (e.g. TV, DVD/VCR, SAT, AMP) to clear all the learned keys for that mode. The LED will blink twice.

4. Repeat Step 2 to delete another mode. To exit programming, press and hold SETUP.

15 CHANGING VOLUME LOCK Volume Lock allows you to control the volume through the device identiﬁed as having your primary speaker(s), regardless of which mode (device) you are using. For example: If you are watching a DVD and want to adjust the volume, which is a TV function, you can simply press the volume key up or down without pressing the TV mode key.

You can also perform Individual Volume Unlock on a selected device to set its volume control for independent operation.

NOTE: The audio mode’s (AMP) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AMP mode, you will have control of the audio device’s volume in all other modes (i.e, VCR/ DVD, TV, SAT.) This can be advantageous if, for example, you always listen to home entertainment devices through your receiver’s speakers.

Locking Volume Control To One Mode (Global VolumeLock) 1. On Teleport™ press and hold SETUP until the last-selected device mode key blinks twice.

2. Enter 993. The last-selected device mode key will blink twice.

3. Select a mode (TV, DVD/VCR, SAT, AMP) which you want to use to control the volume. The selected device mode key will blink twice. Now, when you press VOL+, VOL-, or MUTE, the volume of the selected device (e.g. TV) is controlled regardless of mode.

Continued next page... 16 Unlocking Volume Control for a Single Device (Individual Volume Unlock)

1. Assuming Global Volume Lock is active, select a mode on the Teleport™ remote control that you want to unlock (e.g., SAT) and press it once.

2. Next, press and hold SETUP until the device key blinks twice.

3. Enter 993 on the numeric keypad. The last-selected device key will blink twice.

3. Press VOL- once. The last-selected device key will blink twice.

5. Repeat Steps 1 - 3 for each device you want volume to be unlocked.

Now, after you select a device that has volume unlocked (e.g. SAT) pressing VOL+, VOL-, or MUTE will control only that device’s volume

Unlocking All Volume Control (Global Volume Unlock) NOTE: Performing these instructions will set independent volume control for all programmed devices.

1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 993 on the numeric keypad. The last-selected device key will blink twice

3. Press VOL+ once. The last-selected device key will blink four times.

Continued next page... 17 MACRO KEY BASICS The Teleport™ remote control includes a macro key feature. Macro keys allow you to create small programs which activate a series of key presses in a speciﬁc order(sequence of commands.) For example, you can set up a macro to do the following set of actions with a single key press: change the channel on your TV, start playing a DVD and dim the lights. NOTE: Any previously-programmed macro key must be cleared before it can be changed, see “Clearing a Macro Key” below. Programming a Macro Key

1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 995 on the numeric keypad. The last-selected mode key blinks twice.

3. Select a macro key, for example, the number 1 on the numeric key pad, and press it once.

4. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV followed by VOL+.

NOTE: You can program up to 15 key presses into one macro.

5. Press and hold SETUP until the last-selected mode key blinks twice.

6. To add another macro, repeat Steps 1 - 5, substituting the new key sequence to be added in Step 4. NOTE: Programming more than 5 macros on the same macro key overwrites previous settings. Clearing a Macro Key 1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 995 on the numeric keypad. The last-selected mode key blinks twice.

3. Press the macro key you want to clear once.

4. Press and hold SETUP until The last-selected mode key blinks twice. This macro key is now clear and ready for re-programming. To re-program, see “Programming a Macro Key” above. 18 RE-ASSIGNING DEVICE MODE KEYS The Teleport™ remote control can be set up to control a second device of an already-assigned mode. For example, to have Teleport™ control a TV, cable converter box and two audio receivers, re-assign the unused DVD/VCR mode key to operate the second audio receiver as follows:

NOTE: DVD/VCR is preset at the factory to control an RCA DVD. Performing the steps below will overwrite those settings.

1. On Teleport™ press DVD/VCR once: it will blink once. Press and hold SETUP until the DVD/VCR key blinks twice.

2. Enter 992 on the numeric keypad.

3. Press AMP once, then press DVD/VCR once. The DVD/VCR mode key will blink twice.

The DVD/VCR key is now ready to be programmed for your second audio receiver. See “Programming Device Control” on page 9. To re-assign other mode keys, repeat these steps and substitute the key sequence using the following chart:

NOTE: Only one mode can be assigned to an unused mode key at a time. To Re-Assign Perform Key Sequence DVD/VCR as VCRSETUP992 DVD/2nd AMP AMPDVD/VCR

DVD/VCR as VCRSETUP992 DVD/2nd TV TVDVD/VCR

DVD/VCR as VCRSETUP992 2nd SAT TVDVD/VCR

DVD/VCR VCRSETUP992 back to VCR DVD/VCR DVD/VCR

19 CREATING A Z-WAVE® NETWORK The Teleport™ Universal A/V remote control allows you to control lights, thermostats and many other devices around your home using additional Z-Wave® certiﬁed products from Wayne-Dalton Corporation.

Teleport™ communicates with your Z-Wave® nodes (devices) using radio signals. Large metal objects, house wiring, walls, furniture, refrigerators, microwaves and similar items, may interfere and reduce the range of your unit. A Z-Wave® network is a collection of Z-Wave® nodes in a mesh type of network. Each Z-Wave® node, regardless of manufacturer, communicates with all the other nodes within its range to route and repeat the signals from one device to the next, thus creating a highly robust network transmission throughout the home.

A Z-Wave® network can have only one primary controller. The primary controller establishes the network security to ensure your network will not operate your neighbors network and vice-versa. It is a good practice to label and protect your primary controller since it is the only Z-Wave® controller that can add more nodes to your network or delete nodes from your network. It is easy to add secondary controllers as your network grows. For more tips and great ideas on how to use and expand Teleport™ with Z-Wave® please visit our website, www.wayne-dalton.com/access.

Information on the following pages provide details on speciﬁc commands and features available on the Teleport™ remote control for use with your Z-Wave® network.

The following tips may be useful in setting up Z-Wave® control on your Teleport™ Universal A/V remote control. Page numbers indicate the page in this manual where you can ﬁnd speciﬁc instructions for performing that step.

If you do NOT have an existing network:

1. Install your Z-Wave® nodes that are to be controlled. 2. Delete the Z-Wave® nodes to be controlled from any existing network they may be in. (page 21) 3. Add the nodes to be controlled to Teleport™. (page 21)

NOTE: Your Teleport™ is now the primary controller of your Z-Wave® network.

4. Add the nodes to be controlled to a scene. (page 22) 5. Test your scene by activating the scene. (page 23) If your scene is not correct, repeat step 4. 6. Repeat steps 4 and 5 for each additional scene you wish to create. 7. If you have additional Z-Wave® controllers, they can be made secondary controllers in the network by copying network and scene information as desired. (page 24)

20 If you do have an existing Z-Wave® network:

1. Using your existing network’s primary controller, transfer the network information to Teleport™. (page 26) Your Teleport™ is now a secondary controller in your Z-Wave® network.

NOTE: As a secondary controller, some Z-Wave® commands will not be available such as the ability to add nodes to the network or create additional secondary controllers.

2. Add the nodes to be controlled to a Teleport™ scene. (page 22) 3. Test your scene by activating the scene. (page 23) If your scene is not correct, repeat step 2. 4. Repeat steps 2 and 3 for each additional scene you wish to create.

Adding a Node to your Z-Wave® Network

® ® To add a Z-Wave node to your Z-Wave network(or start creating a network,) perform the following steps: 1. On Teleport™ press the HOME key once. 2. Press and release ADD twice. The HOME key red LED blinks rapidly. ® 3. Press the program button on the Z-Wave node. 4. The HOME LED blinks green twice to indicate a successful operation.. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. Be certain Teleport™ is within 3 ft. of the the node.

Deleting a Node from a Z-Wave® Network To remove a Z-Wave® node from a Z-Wave® network, perform the following steps: 1. On Teleport™ press HOME once. 2. Press and release DEL twice. The HOME red LED blinks rapidly. 3. Press the program button on the node. 4. The HOME LED blinks green twice to indicate a successful operation. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

21 SETTING UP Z-WAVE® SCENES

A Z-Wave® SCENE is a one or more Z-Wave® nodes that can be pre-set to turn to a previously speciﬁed setting (ON, OFF, DIM brightness level, etc...). The Teleport™ remote control allows you to set up a maximum of 20 scenes, containing up to 64 nodes per scene. ® Adding a Z-Wave Node to a SCENE 1. On Teleport™ press and release HOME once. 2. Press and release ADD once. 3. Press and release SCENE once. 4. Press and release a scene number for the scene you wish to add the node to. For scenes 0 - 9 press and release the number for the scene (e.g. 2 for scene 2,) for scenes 10 -19, press SETUP then the second digit of the scene number (e.g. SETUP + 4 = scene 14.) The HOME red LED blinks rapidly. 5. Press the program button on the node. 6. The HOME green LED blinks twice, then the HOME red ® LED blinks rapidly. Adjust the brightness on the Z-Wave node within 30 seconds. To conﬁgure the node to turn on/off to max/min levels, simply press OK without adjusting brightness. 7. Press OK to save the node in the scene. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. Be certain Teleport™ is within 3 ft. of the the node. Removing a Node from a SCENE 1. On Teleport™ press HOME once. 2. Press and release REMOVE once. 3. Press and release SCENE once. 4. Press and release a scene number for the scene you wish to remove the node from. For scenes 0 - 9 press and release the number for the scene (e.g. 2 for scene 2,) for scenes 10 -19, press SETUP then the second digit of the scene number (e.g. SETUP + 4 = scene 14.) The HOME red LED blinks rapidly. 5. Press the program button on the node. 6. The HOME green LED blinks twice, then the HOME red LED blinks rapidly. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 22 Deleting a Z-WAVE® SCENE 1. On Teleport™ press HOME once. 2. Press and release DELETE once. 3. Press SCENE once. 4. Press and release a scene number for the scene you wish to remove. For scenes 0 - 9 press and release the number for the scene (e.g. 2 for scene 2,) for scenes 10 thru 19, press SETUP then the second digit of the scene number (e.g. SETUP + 4 = scene 14.) The HOME red LED blinks rapidly. 5. Press the program button on the node. 6. The HOME green LED blinks twice, then the HOME red LED blinks rapidly. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. ACTIVATING Z-WAVE® SCENES 1. On Teleport™ press HOME once. 2. Press and release a scene number for the scene you wish to control. For scenes 0 - 9 press and release the number for the scene (e.g. 2 for scene 2,) for scenes 10 thru 19, press SETUP then the second digit of the scene number (e.g. SETUP + 4 = scene 14.) The HOME red LED blinks rapidly. 3. On Teleport™ press the ON, OFF, DIM, or BRIGHT KEY. The HOME green LED blinks once. If ON or OFF is pressed, all nodes associated to the scene will turn on or off. If DIM or BRIGHT is pressed, all nodes associated with a scene dim or brighten with each key press. NOTE: If the HOME red LED emits one long, steady blink, the operation was not fully successful and indicates one or more Z-Wave® nodes failed to respond in the activated scene. The cause will need to be investigated to determine if it is un-responsive for a temporary condition such as the light bulb is burned out or the node has become unplugged or if the failure is is due to a catastrophic condition with the Z-Wave® node or the node is missing entirely. Activating ALL ON/ALL OFF 1. On Teleport™ press HOME once. 2. Press and release ALL once. 3. Press either ON or OFF. The HOME green LED blinks once. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 23 Adding Nodes to ALL CONTROL 1. On Teleport™ press HOME once. 2. Press and release ADD once. 3. Press ALL once. The HOME red LED blinks rapidly. 4. Press the program button on the Z-Wave® node. The HOME green LED will blink twice to indicate the operation was successful.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

Deleting Nodes from ALL CONTROL 1. On Teleport™ press HOME once. 2. Press and release REMOVE once. 3. Press ALL once. The HOME red LED blinks rapidly. 4. Press the program button on the Z-Wave® node. The HOME green LED will blink twice to indicate the operation was successful.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

TRANSFERRING NODE AND NETWORK INFORMATION TO A SECONDARY REMOTE

If Teleport™ is your primary controller in your Z-Wave® network, you can add a secondary remote and transfer Teleport™’s node and network information to it. Teleport™ will remain your primary controller and is the only controller that can add or delete Z-Wave® nodes to your network.

1. Place the two controller’s near each other. 2. Press the HOME mode key on Teleport™. 3. Press and hold SETUP until the HOME red LED blinks twice. 4. Enter 966 on the numeric keypad. The HOME red LED blinks twice. 5, Press CH+; the HOME red LED blinks rapdily. 6. Put the target (secondary) controller into receive mode. Refer to the target controller’s user manual for speciﬁc instructions. The HOME green LED blinks twice to indicate a successful operation.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

7. Add nodes, groups, and scenes to the new secondary remote as needed.

24 TRANSFERRING NETWORK INFORMATION ONLY TO A SECONDARY REMOTE

If Teleport™ is the primary controller in your Z-Wave® network, you can add a secondary controller to your network, transferring only your Z-Wave® network information to it. Groups, Scenes and other Z-Wave® commands will then need to be created on the secondary controller.

1. Place the two controllers near each other. 2. On Teleport™, press the HOME mode key. 3. Press and hold SETUP until the HOME red LED blinks twice. 4. Enter 966 on the numeric keypad. The HOME red LED blinks twice. 5, Press CH - ; the HOME red LED blinks rapidly. 6. Put the target (secondary) controller into receive mode. Refer to the target controller’s user manual for specific instructions. The Teleport™ HOME key green LED blinks twice to indicate a successful operation. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 7. Add nodes, groups, and scenes to the new secondary remote as needed. PRIMARY CONTROLLER SHIFT You can transfer the Z-Wave® primary controller role from Teleport™ remote to another controller. This can be done in two ways: a) transferring all network and scene information or b) transferring network information only. Transferring Primary Controller Role with all Network and Scene Information: 1. Place the two controllers near each other. 2. On Teleport™, press the HOME mode key. 3. Press and hold SETUP until the HOME red LED blinks twice. 4. Enter 968 on the numeric keypad. The HOME red LED blinks twice. 5. Press CH+; the HOME red LED blinks rapidly. 6. Put the target (secondary) controller into receive mode. Refer to the target controller’s user manual for specific instructions. The Teleport™ HOME key green LED blinks twice to indicate a successful operation. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 7. Add nodes, groups, and scenes to the new primary controller as needed. 25 Transferring Primary Controller Role with Network Information Only: 1. Place the two controller’s near each other. 2. On Teleport™, press the HOME mode key. 3. Press and hold SETUP until the HOME red LED blinks twice. 4. Enter 966 on the numeric keypad. The HOME red LED blinks twice. 5. Press CH-; the HOME red LED blinks rapidly. 6. Put the target (secondary) controller into receive mode. Refer to the target controller’s user manual for specific instructions. The Teleport™ HOME key green LED blinks twice to indicate a successful operation. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 7. Add nodes, groups, and scenes to the new secondary controller as needed.

RECEIVE CONTROLLER COPY

You can transfer the Z-Wave® network information from another Z-Wave® controller to Teleport™. This would then allow Teleport™ to become a new secondary controller or a primary controller if the existing primary controller is programmed to transfer the primary role.

Receiving Z-Wave® Network Information from another Controller:

1. Place the two controllers near each other. 2. On Teleport™, press the HOME mode key. 3. Press and hold SETUP until the HOME red LED blinks twice. 4. Enter 967 on the numeric keypad. The HOME red LED blinks twice. 5. Put the primary controller into copy send mode. Refer to the primary controller’s user manual for speciﬁc instructions. The Teleport™ HOME key green LED blinks twice to indicate a successful operation. NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence. 6. Add nodes, groups, and scenes to the Teleport™ remote as needed.

26 ® Z-WAVE NETWORK RESET

® ® Z-Wave Network Reset clears all Z-Wave node and network information from Teleport™.

1. Press the HOME key on Teleport™. 2. Press and hold SETUP until the HOME red LED blinks twice. 3. Enter 969 on the numeric keypad. The HOME red LED blinks continuously. The HOME green LED blinks twice to indicate a successful operation.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

® Z-WAVE NETWORK RE-DISCOVERY Network re-discovery is used to make your Z-Wave® network more efﬁcient and improve performance if, for ® example, a Z-Wave plug-in module was moved across the room.

NOTE: This operation requires Teleport™ to be the primary controller.

CAUTION: This operation may take several minutes depending on the size of your network.

1. On Teleport™, press the HOME key. 2. Press and hold SETUP until the HOME red LED blinks twice. 3. Enter 961 on the numeric keypad. The HOME red LED blinks continuously. The HOME green LED blinks twice to indicate a successful operation.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

27 ® REMOVING A FAILED Z-WAVE NODE FROM THE NETWORK NOTE: This operation requires Teleport™ to be the ® primary controller in your Z-Wave network.

CAUTION: This operation will PERMANENTLY remove an ® un-responsive Z-Wave node from your network even if it is un-responsive for a temporary condition such as the light bulb is burned out or the module has become unplugged. Before performing this operation, thoroughly investigate the cause to conﬁrm it is due to a catastrophic ® condition with the Z-Wave node.

If a Z-Wave® node fails to respond in the network, the HOME key LED on Teleport™ will emit a long red blink when trying to access the failed node.

1. Press and hold SETUP until the red LED blinks twice. 2. Enter 972 on the numeric keypad. The HOME green LED will blink continuously.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

CLEARING CUSTOM PROGRAMMING The Teleport™ remote control contains a Custom Programming Reset program which will remove all custom programming, except your setup codes.

CAUTION: This operation will PERMANENTLY remove all custom settings for Volume Lock, Learned Keys, Channel Lock and numeric keypad keys.

1. On Teleport™ press a mode key (TV, DVD/VCR, SAT, AMP) then press and hold SETUP until the last-selected mode key blinks twice.

NOTE: This does not work on the HOME key for home controls.

2. Enter 980 on the numeric keypad. The last-selected device key blinks twice, pauses and blinks twice again to conﬁrm that all custom programming is cleared.

28 TROUBLESHOOTING PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with four(4) new AAA batteries. See “Installing Batteries” on page 8.

PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.

PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly. SOLUTION: Try all listed codes for the device brand being set-up. Make sure all devices can be operated with an infrared remote control.

PROBLEM: No volume on a second TV. SOLUTION: Follow instructions under “Changing Volume Lock”on page 14.

PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter. SOLUTION: Re-program the SAT key for cable code 0476. See “Programming Device Control” on page 9.

PROBLEM: Tried SEARCH METHOD and still could not ﬁnd a working code. SOLUTION: Try SEARCH METHOD again after clearing out the device key using the following procedure: a) Press and hold SETUP until device key blinks twice. b) Enter 992. c) Press and release the device key to be cleared, twice.

PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 032. For Sharp, use TV code 0093 and VCR code 0048.

29 FCC NOTICE

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment has been veriﬁed to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modiﬁcations made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. FCC ID: MG35300 ADDITIONAL INFORMATION

This product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Teleport™ Remote Control. • For help via the Internet, visit us at: www.wayne-dalton.com/access

©Copyright 2008 by Wayne-Dalton Corp. No part of this publication may be reproduced, transmitted, transcribed, s tored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of Wayne-Dalton Corp.

30 MANUFACTURER’S CODES

Setup Codes for Audio Ampliﬁers Adcom 30577, 31100 Aiwa 30406 Bose 30674 Carver 30269 Denon 30160 Durabrand 31561 Elan 30647 GE 30078 Harman/Kardon 30892 JVC 30331 Left Coast 30892 Lenoxx 31561 Linn 30269 Luxman 30165 Magnavox 30269 Marantz 30892, 30321, 30269 McIntosh 30251 Nakamichi 30321 NEC 30264 Optimus 30395, 30823 Panasonic 30308, 30521 Parasound 30246 Philips 30892, 30269 Pioneer 30823 Polk Audio 30892, 30269 RCA 30823 Realistic 30395 Sansui 30321 Shure 30264 Sony 30689, 30220, 30815, 31126 Soundesign 30078, 30211 Technics 30308, 30521 Victor 30331 Wards 30078, 30211 Yamaha 30354, 30133, 30143

31 Setup Codes for Audio Receivers ADC 30531 Aiwa 31405, 30158, 30189, 30121, 30405, 31243, 31388, 31641 Akai 31512 Alco 31390 Amphion Media Works 31563, 31615 AMW 31563, 31615 Anam 31609, 31074 Apex Digital 31257, 31430, 31774 Arcam 31120 Audiotronic 31189 Audiovox 31390, 31627 B & K 30701, 30820, 30840 BK 30702 Bose 31229, 30639, 31253, 31629, 31841, 31933 Brix 31602 Cambridge Soundworks 31370 Capetronic 30531 Carver 31189, 30189, 30042 Classic 31352 Coby 31263, 31389 Criterion 31420 Curtis Mathes 30080 Daewoo 31250 Dell 31383 Delphi 31414 Denon 31360, 30004, 31142 Fisher 30042, 31801 Garrard 30463 Gateway 31517 Glory Horse 31263 Go Video 31532 Harman/Kardon 30110, 30189, 30891, 31304, 31306 Hewlett Packard 31181 Hitachi 31273, 31801 Initial 31426 Insignia 31030

32 Integra 30135, 31298, 31320 JBL 30110, 31306 JVC 30074, 31263, 31374, 31495, 31811, 31871 Kenwood 31313, 31570, 31569, 30027, 31916, 31670, 31262, 31261, 31052, 31032, 30569, 30337, 30314, 30313, 30239, 30186, 30077, 30042 KLH 31390, 31412, 31428 Koss 31366, 31497 Lasonic 31798 Lenoxx 31437 LG 31293 Linn 30189 Liquid Video 31497 LXI 30181 Magnavox 31189, 31269, 30189, 30391, 30531, 31514 Marantz 31189, 31269, 30039, 30189, 31289 MCS 30039, 30346 Mitsubishi 31393 NAD 30320, 30845 Nakamichi 30097, 30876, 31555 Norcent 31389 Nova 31389 Onkyo 30135, 30380, 30842, 31298, 31320, 31531 Optimus 31023, 30042, 30080, 30181, 30186, 30531, 30670, 30738, 30801, 31074 Oritron 31366, 31497 Panasonic 31308, 31518, 30039, 30309, 30367, 31288, 31316, 31548, 31633, 31763, 31764 Philips 31189, 31269, 30189, 30391, 31120, 31266 Pioneer 31023, 30014, 30080, 30150, 30244, 30531, 30630, 31384 Polaroid 31508 Polk Audio 30189, 31289, 31414

33 Proscan 31254 Quasar 30039 RadioShack 31263 RCA 31023, 31609, 31254, 30054, 30080, 30346, 30530, 30531, 31074, 31154, 31390, 31511 Realistic 30181 Regent 31437 Rio 31383, 31869 Saba 31519 Samsung 31295, 31500 Sansui 30189, 30346 Sanyo 30801, 31251, 31469, 31801 Sharp 30186, 31286 Sharper Image 31263, 31556 Sherwood 30491, 30502, 31077, 31423, 31517, 31653, 31905 Shinsonic 31426 Sirius 31602, 31627, 31811, 31987 Sonic Blue 31383, 31532, 31869 Sony 31058, 31441, 31258, 31759, 31622, 30158, 30168, 31349, 31406, 31442, 31558, 31658, 31758, 31858, 31958 Soundesign 30670 Stereophonics 31023 Sunﬁre 31313, 30313, 30314, 31052 Teac 30463, 31074, 31390, 31528 Technics 31308, 31518, 30039, 30309 Thorens 31189 Toshiba 31788 Venturer 31390 Victor 30074 Wards 30158, 30189, 30014, 30054, 30080 XM 31406, 31414 Yamaha 30176, 30186, 31176, 31276, 31331, 31375, 31476 Zenith 30857, 31293

34 Setup Codes for Audio Accessories Accurian 31106 Aiwa 30159 Altec Lansing 31056, 31485 Apple 31115, 31644 Cambridge Soundworks 31530 Creative 30872 iDeck 31106 Marantz 31491 Monitor Audio 31106 Motorola 31464 NaviPod 31644 Netgear 31785 Omniﬁ31605 Roku 31828 Russound 31302 Slim Devices 31844 Sony 30159 Yamaha 31809, 31810

Setup Codes for Cable Boxes/Converters ABC 00003, 00008 Americast 00899 Bell South 00899 Digeo 01187 Director 00476 General Instrument 00476, 00810, 00276, 00003 GoldStar 00144 Hamlin 00273 Jerrold 00476, 00810, 00276, 00003 Memorex 00000 Motorola 01376, 00476, 00810, 00276, 01187 Pace 01877, 00237, 00008 Panasonic 00000, 00107 Paragon 00000 Philips 01305, 00317 Pioneer 01877, 00877, 00144, 00533 Pulsar 00000 Quasar 00000 RCA 01256

35 Regal 00273 Runco 00000 Samsung 00144 Scientiﬁc Atlanta 01877, 00877, 00477, 00008 Sony 01006 Starcom 00003 Supercable 00276 Thomson 01256 Torx 00003 Toshiba 00000 Zenith 00000, 00525, 00899

Setup Codes for CD Players Aiwa 30157 Burmester 30420 California Audio Labs 30029, 30303 Carver 30157, 30179 Denon 30873, 30003, 30034 DKK 30000 DMX Electronics 30157 Fisher 30179 Garrard 30420 Genexxa 30032 Harman/Kardon 30157, 30173 Hitachi 30032 Integra 30101 JVC 30072 Kenwood 30681, 30626, 30028, 30037, 30190 KLH 31318, 31372, 31373, 31711 Krell 30157 Linn 30157 Magnavox 30157 Marantz 30626, 30029, 30157 MCS 30029 Miro 30000 Mission 30157 MTC 30420 NSM 30157 Onkyo 30868, 30101

36 Optimus 31063, 30000, 30032, 30037, 30087, 30145, 30179, 30420, 30468, 31075 Panasonic 30029, 30303, 30388, 30752 Parasound 30420 Philips 30626, 30157 Pioneer 31063, 31062, 30032, 31087, 30468 Polk Audio 30157 Proton 30157 QED 30157 Quad 30157 Quasar 30029 RadioShack 31075 RCA 31062, 30032, 30053, 30179, 30420, 30468 Realistic 30179, 30420 Rotel 30157, 30420 SAE 30157 Sansui 30157 Sanyo 30087, 30179 Sharp 30861, 30037 Sherwood 31067 Sonic Frontiers 30157 Sony 30490, 30000, 30100, 31364, 30185 Soundesign 30145 TAG McLaren 30157 Tascam 30420 Teac 30420 Technics 30029, 30303 Victor 30072 Wards 30157, 30053 Yamaha 30490, 30888, 30036, 31292

Setup Codes for DBS AlphaStar 00772 Coolsat 01806 DirecTV 01377, 00392 Dishpro 01505, 01005, 00775, 01775 Echostar 01505, 01005 Hitachi 00819

37 HTS 00775, 01775 Hughes Network Systems 00749, 01749 JVC 00775, 01775 LG 01414 Magnavox 00724, 00722 Memorex 00724 Motorola 00869 Panasonic 00247, 00701 Philips 00724, 01076, 00722, 00099 RCA 00566, 00855, 00143, 01392 Samsung 01276, 01109 Sony 01639 Star Choice 00869 Toshiba 00749, 00790, 01285 Uniden 00724, 00722 Zenith 01856

Setup Codes for DVD Players Accurian 21072, 21416 Adcom 21094 Advent 21016 Aiwa 20641 Akai 20695, 20770, 20899, 21089 Alco 20790 Allegro 20869 Amphion Media Works 20872 AMW 20872 Apex Digital 20672, 20717, 20755, 20794, 20796, 20797, 20830, 21004, 21020, 21056, 21061, 21100 Arrgo 21023 Aspire Digital 21168, 21407 Audiovox 20790, 21071, 21072, 21121, 21122 Axion 21071, 21072 Bel Canto Design 21571 Blaupunkt 20717 Blue Parade 20571 Broksonic 20695, 20868 Cinea 20831

38 CineVision 20876, 20833, 20869 Citizen 20695, 21277 Coby 20778, 21086, 21107, 21177 Craig 20831 Curtis Mathes 21087 CyberHome 20816, 20874, 21023, 21024, 21117, 21129, 21502 Daewoo 20784, 20705, 20833, 20869, 21169, 21172, 21234, 21242 Denon 20490, 20634 Desay 21407 DigitalMax 21738 Disney 20675, 21270 Dual 21068, 21085 Durabrand 21127 DVD2000 20521 Emerson 20591, 20675, 20821, 21268 Enterprise 20591 ESA 20821, 21268 Fisher 20670 Funai 20675, 21268, 21334 Gateway 21073, 21077, 21158, 21194 GE 20522, 20815, 20717 Go Video 20744, 20715, 20741, 20783, 20833, 20869, 21044, 21075, 21099, 21158, 21304, 21730 Go Vision 21071, 21072 GoldStar 20741 Greenhill 20717 Harman/Kardon 20582, 20702 Hitachi 20573, 20664, 21247 Hiteker 20672 Humax 21588 iLo 21348 Initial 20717 Insignia 21268 Integra 20627 JBL 20702 Jensen 21016

39 JVC 20558, 20623, 20867, 21164, 21275, 21602, 21863 Kawasaki 20790 Kenwood 20490, 20534 KLH 20717, 20790, 21020, 21149 Koss 20651 Lasonic 20798 Lenoxx 21127 LG 20591, 20741, 20801, 20869 LiteOn 21058, 21158, 21416, 21440, 21738 Loewe 20511 Magnavox 20503, 20539, 20646, 20675, 20821, 21268, 21506 Malata 20782 Marantz 20539 McIntosh 21273 Memorex 20695, 20831, 21270 Microsoft 20522, 21708 Mintek 20839, 20717 Mitsubishi 21521, 20521 NAD 20741 Nakamichi 21222 NEC 20785 Nesa 20717 NexxTech 21402 Norcent 21003, 20872, 21107, 21265 Onkyo 20503, 20627, 20792 Oritron 20651 Panasonic 20490, 20632, 20703, 21362, 21462, 21490, 21762 Philips 20503, 20539, 20646, 20675, 20854, 21260, 21267, 21354 Pioneer 20525, 20571, 20631, 20632 Polaroid 21020, 21061, 21086 Polk Audio 20539 Portland 20770 Presidian 20675, 21072, 21738 Prima 21016 Proscan 20522 ProVision 20778

40 Qwestar 20651 RCA 20522, 20571, 20717, 20790, 20822, 21022, 21132, 21769 Rio 20869 Rotel 20623, 21178 Rowa 20823 Sampo 20698, 20752 Samsung 20490, 20573, 20199, 20820, 20899, 21044, 21075 Sansui 20695 Sanyo 20670, 20695, 20873 Sensory Science 21158 Sharp 20630, 20675, 20752, 21256 Sharper Image 21117 Sherwood 20633, 20770, 21043, 21077 Shinsonic 20533, 20839 Sonic Blue 20869, 21099 Sony 20533, 21533, 20864, 21033, 21070, 21431, 21892 Sova 21122 Superscan 20821 Sylvania 20675, 20821, 21268 Symphonic 20675, 20821 TAG McLaren 20894 Teac 20790 Technics 20490, 20703 Theta Digital 20571 Tivo 21503 Toshiba 20503, 20695, 21045, 21154, 21503, 21588, 21769 Tredex 20800 Urban Concepts 20503 US Logic 20839 Venturer 20790 Vizio 21064, 21226 Xbox 20522, 21708 Yamaha 20490, 20539, 20545 Zenith 20503, 20591, 20741, 20869 Zoece 21265

41 Setup Codes for DVD/PVR Combos

Controlled by the DVD Go Video 21730 Humax 21588 Panasonic 20490 Pioneer 20631 RCA 20522 Sharp 21256 Sylvania 20675 Toshiba 21503, 21588

Controlled by the VCR RCA 20880 Sylvania 20000 Toshiba 21008, 21996

42 Setup Codes for Home Automation Accutek 31215 Amana 31716 Audio Access 30154 Bionaire 30846, 31215 Comfortex 30400 Da-Lite 30780 Frigidaire 31333, 31845 GE 30240 GoldStar 31537 Holmes 31215 Hunter Douglas 30433 Kenmore 31537 Lasko 30846 LG 31537 Lightolier 30184 LiteTouch 30084 Lutron 30597, 30318, 31239, 31597 One For All 30167 PCS 30184 RadioShack 30240 Royal Sovereign 31651 Russound 31232, 31233 Security System 30167 Sharper Image 30846 SmartLinc 30184 Somfy 30780 Universal X10 30167 Whirlpool 31332 Windmere 31215 X10 30167

Setup Codes for Satellite Receivers AlphaStar 00772 Bell ExpressVu 00775, 01170 Chaparral 00216 Coolsat 01806 Crossdigital 01109

43 DirecTV 01377, 00392, 00566, 00639, 01639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076, 01108, 00099, 01109, 01392, 01414, 01442, 01443, 01444, 01609, 01640 Dish Network System 01505, 01005, 00775, 01170, 01775 Dishpro 01505, 01005, 00775, 01775 Echostar 01505, 01005, 00775, 01170, 01775 Expressvu 00775, 01775 GE 00566 General Instrument 00869 GOI 00775, 01775 Hisense 01535 Hitachi 00819, 01250 HTS 00775, 01775 Hughes Network Systems 01142, 00749, 01749, 01442, 01443, 01444 Humax 01790 iLo 01535 JVC 00775, 01170, 01775 LG 01226, 01414 Magnavox 00724, 00722 Memorex 00724 Mitsubishi 00749 Motorola 00869 Next Level 00869 Panasonic 00247, 00701 Pansat 01807 Paysat 00724 Philips 01142, 00749, 01749, 00724, 01076, 00722, 00099, 01442, 00856 Proscan 00392, 00566 Proton 01535 RadioShack 00869 RCA 00566, 00855, 00143, 01392 Samsung 01377, 01276, 01108, 01109, 01442, 01609 Sony 00639, 01639, 01640

44 Star Choice 00869 Tivo 01142, 01442, 01443, 01444 Toshiba 00749, 01749, 00790, 01285 UltimateTV 01392, 01640 Ultrasat 01806 Uniden 00724, 00722 US Digital 01535 USDTV 01535 Voom 00869 Zenith 01856, 00856

45 Setup Codes for DVR/PVR Systems ABS 21972 Alienware 21972 CyberPower 21972 Dell 21972 DirecTV 20739 Gateway 21972 Go Video 20614 Hewlett Packard 21972 Howard Computers 21972 HP 21972 Hughes Network Systems 20739 Humax 20739 Hush 21972 iBUYPOWER 21972 Linksys 21972 Media Center PC 21972 Microsoft 21972 Mind 21972 Niveus Media 21972 Northgate 21972 Panasonic 20614, 20616 Philips 20618, 20739 RCA 20880 ReplayTV 20614, 20616 Samsung 20739 Sonic Blue 20614, 20616 Sony 20636, 21972 Stack 9 21972 Systemax 21972 Tagar Systems 21972 Tivo 20618, 20636, 20739 Toshiba 21008, 21972, 21996 Touch 21972 Viewsonic 21972 Voodoo 21972 ZT Group 21972

46 Setup Codes for TVs A-Mark 10003 Abex 10032 Accurian 11803 Action 10873 Admiral 10093, 10463 Advent 10761, 10783, 10815, 10817, 10842, 11933 Adventura 10046 Aiko 10092 Akai 10812, 10702, 10030, 10672, 11207, 11675, 11676, 11903, 11935 Alaron 10179 Albatron 10700, 10843 Ambassador 10177 America Action 10180 Ampro 10751 Anam 10180 AOC 10030, 10003, 10052, 11365 Apex Digital 10748, 10879, 10765, 10767, 10890, 11217, 11943 Archer 10003 Astar 11531, 11548 Audiovox 10451, 10180, 10092, 10003, 10623, 10710, 10802, 10846, 10875, 11284, 11937, 11951, 11952 Aventura 10171 Axion 11937 Bell & Howell 10154, 10016 BenQ 11032, 11315 Bradford 10180 Broksonic 10236, 10463, 10003, 11911, 11929, 11935, 11938 Byd:sign 11309, 11311 Cadia 11283 Candle 10030, 10046, 10056 Carnivale 10030 Carver 10054 Celebrity 10000 Celera 10765 Champion 11362 Changhong 10765 47 Cinego 11986 Citizen 10060, 10030, 10092, 10039, 10046, 10056, 10280, 11928, 11935 Clarion 10180 Commercial Solutions 11447, 10047 Concerto 10056 Contec 10180 Craig 10180 Crosley 10054 Crown 10180, 10039 Curtis Mathes 10047, 10054, 10154, 10451, 10093, 10060, 10702, 10030, 10145, 10166, 11919, 11347, 11147, 10466, 10056, 10039, 10016 CXC 10180 CyberHome 10794 Cytron 11326 Daewoo 10451, 10092, 11661, 10039, 10623, 10661, 10672, 11928 Dell 11080, 11178, 11264, 11403 Denon 10145, 10511 Denstar 10628 Diamond Vision 11996, 11997 Dumont 10017 Durabrand 10463, 10180, 10178, 10171, 11034, 10003 Dwin 10720, 10774 Electroband 10000 Electrograph 11623, 11755 Electrohome 10463 Emerson 10154, 10236, 10463, 10180, 10178, 10171, 11963, 11944, 11929, 11928, 11911, 11394, 10623, 10280, 10179, 10177, 10039, 10038 Emprex 11422, 11546 Envision 10030, 10813, 11365 Epson 10833, 10840, 11290 ESA 10812, 10171, 11944, 11963

48 Fisher 10154 FlexVision 10710 Fujitsu 10179, 10683, 10809, 10853 Funai 10180, 10171, 10179, 11271, 11904, 11963 Futuretech 10180 Gateway 11001, 11002, 11003, 11004, 11755, 11756 GE 11447, 10047, 10051, 10451, 10178, 10021, 10027, 11347, 11917, 11919, 11922 Gibralter 10017, 10030 Go Video 10886 GoldStar 10178, 10030, 10032, 11926 Grunpy 10180, 10179 Haier 11034, 10768 Hallmark 10178 Hannspree 11348, 11351, 11352 Harley Davidson 10179, 11904 Harman/Kardon 10054 Harvard 10180 Havermy 10093 Helios 10865 Hello Kitty 10451 Hewlett Packard 11088, 11089, 11101, 11494, 11502, 11642 Hisense 10748 Hitachi 11145, 10145, 10016, 10032, 10038, 10056, 10797, 11904, 11960 HP 11088, 11089, 11101, 11494, 11502, 11642 Hyundai 10849, 11219, 11294 iLo 11286, 11603, 11990 Inﬁnity 10054 Initial 11603, 11990 Insignia 10171, 11204, 11326, 11517, 11564, 11963, 12002 Inteq 10017 Janeil 10046 JBL 10054 JCB 10000

49 Jensen 10761, 10815, 10817, 11299, 11933 JVC 10053, 10731, 11253, 11923 Kaypani 10052 KDS 11498 KEC 10180 Kenwood 10030 KLH 10765, 10767, 11962 Kloss 10024, 10046 Konka 10628, 10632, 10638, 10703, 10707 Kost 11262, 11483 KTV 10180, 10030, 10039, 10280 LG 11265, 10178, 10700, 10823, 10829, 10856, 11178, 11325, 11423, 11758, 11993 Lloyd's 11904 Logik 10016 Luxman 10056 LXI 10047, 10054, 10154, 10156, 10178 MAG 11498 Magnasonic 11928 Magnavox 11454, 10054, 10030, 10706, 11990, 11963, 11944, 11931, 11904, 11525, 11365, 11254, 11198, 10802, 10386, 10187, 10179, 10096, 10024, 10020 Majestic 10016 Marantz 10054, 10030, 10704, 10854, 10855, 11154, 11398 Matsushita 10250, 10650 Maxent 10762, 11211, 11755 Megapower 10700 Megatron 10178, 10145, 10003 Memorex 10154, 10463, 10150, 10178, 10016, 10179, 11911, 11926 MGA 10150, 10178, 10030 Midland 10047, 10017, 10051, 10032, 10039

50 Mintek 11603, 11990 Minutz 10021 Mitsubishi 10093, 11250, 10150, 10178, 10836, 10868, 11550, 11917 Monivision 10700, 10843 Motorola 10093, 10835 Moxell 10835 MTC 10060, 10030, 10056 Multitech 10180 NAD 10156, 10178, 10056, 10866, 11156 NEC 10030, 10056, 10497, 10882, 11398, 11704 NetTV 10762, 11755 Nikko 10178, 10030, 10092 Norcent 10748, 10824, 11089, 11365, 11589, 11590, 11591 Norwood Micro 11286, 11296, 11303 Noshi 10018 NTC 10092 Olevia 11144, 11240, 11331, 11610 Olympus 11342 Onwa 10180 Optimus 10154, 10250, 10166, 10650 Optoma 10887 Optonica 10093 Orion 10236, 10463, 11463, 10179, 11911, 11929 Panasonic 10250, 10051, 10650, 11291, 11410, 11480, 11919, 11941, 11946, 11947 Penney 10047, 10156, 10051, 10060, 10178, 10030, 10003, 10018, 10021, 10027, 10032, 10039, 11347, 11919, 11926 Petters 11523 Philco 10054, 10030, 10020, 10096 Philips 11454, 10054, 10690, 11154, 11483, 11961 Pilot 10030, 10039 Pioneer 10166, 10038, 10679, 10866, 11260, 11398

51 Polaroid 10765, 10865, 11262, 11276, 11314, 11316, 11326, 11327, 11328, 11341, 11498, 11523, 11962, 11991, 11992 Portland 10092, 10039 Prima 10761, 10783, 10815, 10817, 11933 Princeton 10700, 10717 Prism 10051 Proscan 11447, 10047, 11347, 11922 Proton 10178, 10003, 10052, 10466 Protron 11320, 11323 Proview 10835, 11401, 11498 Pulsar 10017 Quasar 10250, 10051, 10650, 11919 RadioShack 10047, 10154, 10180, 10178, 10030, 10032, 10039, 10056, 11904 RCA 11447, 10047, 12002, 11958, 11953, 11948, 11922, 11919, 11917, 11547, 11347, 11247, 11147, 11047, 10679, 10090, 10038, 10018 Realistic 10154, 10180, 10178, 10030, 10032, 10039, 10056 Runco 10017, 10030, 10497, 10603, 11398 Sampo 10030, 10032, 10039, 10052, 10762, 11755 Samsung 10060, 10812, 10702, 10178, 10030, 10032, 10056, 10766, 10814, 11060, 11312, 11395, 11575, 11903, 11959 Samsux 10039 Sansui 10463, 11409, 11904, 11911, 11929, 11935 Sanyo 10154, 10088, 10146, 10799, 10893, 11142 Sceptre 10878, 11217, 11360, 11599 Scotch 10178 Scott 10236, 10180, 10178, 10179

52 Sears 10047, 10054, 10154, 10156, 10178, 10171, 10056, 10146, 10179, 11904, 11926 Sharp 10093, 10039, 10386, 10491, 10688, 10689, 10818, 10851, 11602, 11917, 11393 Sheng Chia 10093 Sherwood 11399 Signature 10016 Signet 11262 SIM2 Multimedia 11297 Simpson 10187 Sony 11100, 10000, 10834, 11317, 11685, 11904, 11925 Soundesign 10180, 10178, 10179 Sova 11320, 11952 Soyo 11520 Spectricon 10003 Spectroniq 11498 Squareview 10171 SSS 10180 Starlite 10180 Studio Experience 10843 Superscan 10093, 10864 Supre-Macy 10046 Supreme 10000 SVA 10748, 10587, 10768, 10865, 10870, 10871, 10872 Sylvania 10054, 10030, 10171, 10020, 10096, 11271, 11314, 11394, 11931, 11944, 11963 Symphonic 10180, 10171, 11904, 11944 Syntax 11144, 11240, 11331 Tandy 10093 Tatung 10003, 11101, 11285, 11286, 11287, 11288, 11361, 11756 Technics 10250, 10051 Technol Ace 10179 Techview 10847 Techwood 10051, 10003, 10056

53 Teknika 10054, 10180, 10150, 10060, 10092, 10016, 10039, 10056, 10179 Telefunken 10702, 10056 Thomas 11904 TMK 10178, 10056, 10177 TNCi 10017 Toshiba 10154, 11256, 10156, 11265, 10060, 11945, 11936, 11935, 11918, 11704, 11656, 11635, 11524, 11356, 11343, 11325, 11306, 11156, 10845, 10832, 10650, 11971 Totevision 10039 TVS 10463 Ultra 11323 Universal 10027 US Logic 11286, 11303 Vector Research 10030 Victor 10053 Vidikron 10054, 11398 Vidtech 10178 Viewsonic 10797, 10857, 10864, 10885, 11330, 11342, 11578, 11627, 11640, 11755 Viking 10046 Viore 11207 Visart 11336 Vizio 10864, 10885, 11499, 11756, 11758 Wards 10054, 10178, 10030, 10016, 10020, 10021, 10027, 10056, 10096, 10179, 10866, 11156 Waycon 10156 Westinghouse 10885, 10889, 10890, 11282, 11577 White Westinghouse 10463, 10623 Wyse 11365 Yamaha 10030, 10769, 10797, 10833, 10839 Zenith 10017, 10463, 11265, 10178, 10092, 10016, 11904, 11911, 11929 Zonda 10003

54 Setup Codes for TVs (DLP) Hewlett Packard 11494 HP 11494 LG 11265 Magnavox 11525 Mitsubishi 11250 Optoma 10887 Panasonic 11291 RCA 11447 Samsung 10812, 11060, 11312 SVA 10872 Toshiba 11265, 11306 Vizio 11499

Setup Codes for TVs (LCD) Accurian 11803 Action 10873 Akai 11675, 11676, 11935 AOC 11365 Apex Digital 10890, 11217 Astar 11531, 11548 Audiovox 10180, 10710, 10802, 10846, 10875, 11284, 11937, 11951, 11952 BenQ 11315 Byd:sign 11309, 11311 Cadia 11283 Citizen 11935 CyberHome 10794 Dell 11080, 11178, 11264 Emprex 11422, 11546 Envision 10813, 11365 FlexVision 10710 Funai 10171 Go Video 10886 Hannspree 11348, 11351 Hewlett Packard 11088, 11642

55 HP 11088, 11642 Hyundai 10849, 11219, 11294 iLo 11286, 11603, 11990 Initial 11603, 11990 Insignia 11204, 11517, 11564, 12002 Jensen 11299 Kost 11262 LG 10856, 11178, 11993 Magnavox 10802, 11198, 11365, 11990 Marantz 10855 Maxent 10762, 11211, 11755 Mintek 11603, 11990 Mitsubishi 11250 NetTV 10762 Norcent 11365, 11589, 11591 Norwood Micro 11286, 11296 Olevia 11144, 11240, 11331, 11610 Panasonic 10650, 11941 Petters 11523 Philips 11454, 11483 Polaroid 11262, 11276, 11316, 11341, 11498, 11523 Protron 11320, 11323 Proview 11401 RCA 10047, 11958 Sampo 10762, 11755 Samsung 10812, 10766, 10814, 11395, 11575 Sansui 11409 Sanyo 11142 Sceptre 10878, 11217, 11360, 11599 Sharp 10093, 10818, 11602 Sherwood 11399 Signet 11262 Sony 11685 Sova 11320 Soyo 11520 Superscan 10864 SVA 10587, 10870, 10871 Sylvania 10171, 11271, 11314, 11394 Symphonic 10171

56 Syntax 11144, 11240, 11331 Tatung 11286 Techview 10847 Toshiba 10845, 11343, 11524, 11635, 11656 Ultra 11323 US Logic 11286 Vidikron 11398 Viewsonic 10857, 10864, 10885, 11330, 11578, 11627, 11640 Visart 11336 Vizio 10864, 10885, 11756, 11758 Westinghouse 10885, 10889, 10890, 11282, 11577 Wyse 11365 Zenith 11265

Setup Codes for TVs (Plasma) Akai 10812, 11207, 11675 Albatron 10843 BenQ 11032 Byd:sign 11311 Daewoo 10661 Dell 11264 Electrograph 11623, 11755 ESA 10812 Fujitsu 10683, 10809, 10853 Funai 11271 Gateway 11001, 11002, 11003, 11004, 11755, 11756 Helios 10865 Hewlett Packard 11089, 11502 Hitachi 10797 HP 11089, 11502 Insignia 11564 JVC 10731 LG 10178, 10829, 10856, 11423, 11758 Marantz 10704, 11398 Maxent 11755 Mitsubishi 10836

57 Monivision 10843 Motorola 10835 Moxell 10835 NEC 11398, 11704 NetTV 11755 Norcent 10824, 11089, 11590 Norwood Micro 11303 Panasonic 10250, 10650, 11480 Philips 10690 Pioneer 10679, 11260, 11398 Polaroid 10865, 11276, 11327, 11328 Proview 10835 Runco 11398 Sampo 11755 Samsung 10812, 11312 Sony 10000, 11317 Studio Experience 10843 SV A 10865 Sylvania 11271, 11394 Tatung 11101, 11285, 11287, 11288, 11756 Toshiba 10650, 11704 US Logic 11303 Viewsonic 10797, 11755 Viore 11207 Vizio 11756, 11758 Yamaha 10797 Zenith 10178

58 Setup Codes for TV/DVD Combos Controlled by the TV Accurian 11803 Advent 11933 Akai 11675, 11935 Apex Digital 11943 Audiovox 11937, 11951, 11952 Axion 11937 Broksonic 11935 Cinego 11986 Citizen 11935 Diamond Vision 11997 Emerson 11394, 11963 ESA 11963 Funai 11963 Hitachi 11960 iLo 11990 Initial 11990 Insignia 11963, 12002 Jensen 11933 KLH 11962 LG 11993 Magnavox 11963, 11990 Mintek 11990 Panasonic 11941 Philips 11961 Polaroid 11962, 11991 Prima 11933 RCA 11948, 11958, 12002 Samsung 11903 Sansui 11935 Sova 11952 Sylvania 11394, 11963 Toshiba 11635, 11935

Controlled by the DVD Advent 21016 Akai 20695 Apex Digital 20830 Audiovox 21071, 21121, 21122

59 Axion 21071 Broksonic 20695 Citizen 20695 Emerson 20675, 21268 ESA 21268 Funai 21268 Go Vision 21071 Hitachi 21247 Insignia 21268 Jensen 21016 Magnavox 21268 Panasonic 21490 Philips 20854, 21260 Prima 21016 RCA 21022 Samsung 20899 Sansui 20695 Sova 21122 Sylvania 20675, 21268 Toshiba 20695

60 Setup Codes for TV/VCR Combos Controlled by the TV America Action 10180 Audiovox 10180 Broksonic 11911, 11929 Citizen 11928 Curtis Mathes 11919 Daewoo 11928 Emerson 10236, 11911, 11928, 11929 Funai 11904 GE 11917, 11919, 11922 GoldStar 11926 Harley Davidson 11904 Hitachi 11904 JVC 11923 Lloyd's 11904 Magnasonic 11928 Magnavox 11904, 11931 Memorex 11926 Mitsubishi 11917 Orion 11911, 11929 Panasonic 11919 Penney 11919, 11926 Quasar 11919 RadioShack 11904 RCA 11917, 11919, 11922 Samsung 11959 Sansui 11904, 11911, 11929 Sears 11904, 11926 Sony 11904, 11925 Sylvania 11931 Symphonic 11904 Thomas 11904 Toshiba 11918, 11936 Zenith 11904, 11911, 11929

Controlled by the VCR America Action 20278 Audiovox 20278 Broksonic 20002, 20479, 21479

61 Citizen 21278 Colt 20072 Curtis Mathes 21035 Daewoo 21278 Emerson 20002, 20479, 20593, 21278, 21479 Funai 20000 GE 20240, 20807, 21035, 21060 GoldStar 21237 Harley Davidson 20000 Hitachi 20000 LG 21037 Lloyd's 20000 Magnasonic 20593, 21278 Magnavox 20000, 20593, 21781 Magnin 20240 Memorex 20162, 21037, 21162, 21237, 21262 MGA 20240 Mitsubishi 20807 Optimus 20162, 20593, 21162, 21262 Orion 20002, 20479, 21479 Panasonic 20162, 21035, 21162, 21262 Penney 20240, 21035, 21237 Quasar 20162, 21035, 21162 RadioShack 20000, 21037 RCA 20240, 20807, 21035, 21060 Samsung 21014 Sansui 20000, 20479, 21479 Sanyo 20240 Sears 20000, 21237 Sony 20000, 21232 Sylvania 21781 Symphonic 20000, 20593 Thomas 20000 Toshiba 20845, 21145 Zenith 20000, 20479, 21479

62 Setup Codes for VCRs ABS 21972 Admiral 20048, 20209 Adventura 20000 Aiko 20278 Aiwa 20037, 20000, 20124 Alienware 21972 America Action 20278 American High 20035 Asha 20240 Audiovox 20037, 20278 Beaumark 20240 Bell & Howell 20104 Broksonic 20184, 20121, 20209, 20002, 20479, 21479 Calix 20037 Canon 20035 Carver 20081 CCE 20072, 20278 Citizen 20037, 20278, 21278 Colt 20072 Craig 20037, 20047, 20240, 20072 Curtis Mathes 20060, 20035, 20162, 21035 Cybernex 20240 CyberPower 21972 Daewoo 20045, 20278, 21278 Dell 21972 Denon 20042 DirecTV 20739 Durabrand 20039, 20038 Dynatech 20000 Electrohome 20037 Electrophonic 20037 Emerex 20032 Emerson 20037, 20184, 20000, 20121, 20043, 20209, 20002, 20278, 20479, 20593, 21278, 21479, 21593 Fisher 20047, 20104 Fuji 20035, 20033 Funai 20000, 20593, 21593

63 Garrard 20000 Gateway 21972 GE 20060, 20035, 20240, 20807, 21035, 21060 Go Video 20432, 20614 GoldStar 20037, 20038, 21237 Gradiente 20000 Harley Davidson 20000 Harman/Kardon 20081, 20038 Harwood 20072 Hewlett Packard 21972 HI-Q 20047 Hitachi 20000, 20042, 20089 Howard Computers 21972 HP 21972 Hughes Network Systems 20042, 20739 Humax 20739 Hush 21972 iBUYPOWER 21972 JVC 20067 KEC 20037, 20278 Kenwood 20067, 20038 KLH 20072 Kodak 20035, 20037 LG 21037 Linksys 21972 Lloyd's 20000 Logik 20072 LXI 20037 Magnasonic 20593, 21278 Magnavox 20035, 20039, 20081, 20000, 20149, 20563, 20593, 21593, 21781 Magnin 20240 Marantz 20035, 20081 Marta 20037 Matsushita 20035, 20162, 21162 Media Center PC 21972 MEI 20035

64 Memorex 20035, 20162, 20037, 20048, 20039, 20047, 20240, 20000, 20104, 20209, 20479, 21037, 21162, 21237, 21262 MGA 20240, 20043 MGN Technology 20240 Microsoft 21972 Mind 21972 Minolta 20042 Mitsubishi 20067, 20043, 20807 Motorola 20035, 20048 MTC 20240, 20000 Multitech 20000, 20072 NEC 20104, 20067, 20038 Nikko 20037 Niveus Media 21972 Noblex 20240 Northgate 21972 Olympus 20035 Optimus 21062, 20162, 20037, 20048, 20104, 20432, 20593, 21162, 21262 Orion 20184, 20209, 20002, 20479, 21479 Panasonic 21062, 20035, 20162, 20225, 20614, 20616, 21035, 21162, 21262 Penney 20035, 20037, 20240, 20042, 20038, 21035, 21237 Pentax 20042 Philco 20035 Philips 20035, 20081, 20618, 20739, 21081, 21181 Pilot 20037 Pioneer 20067 Polk Audio 20081 Presidian 21593 Proﬁtronic 20240 Proscan 20060, 21060 Protec 20072 Pulsar 20039 Quasar 20035, 20162, 21035, 21162

65 RadioShack 20000, 21037 Radix 20037 Randex 20037 RCA 20060, 20240, 20042, 20149, 20807, 20880, 21035, 21060 Realistic 20035, 20037, 20048, 20047, 20000, 20104 ReplayTV 20614, 20616 Ricavision 21972 Runco 20039 Samsung 20240, 20045, 20739, 21014 Sanky 20048, 20039 Sansui 20000, 20067, 20209, 20479, 21479 Sanyo 20047, 20240, 20104 Scott 20184, 20045, 20121, 20043 Sears 20035, 20037, 20047, 20000, 20042, 20104, 21237 Sharp 20048, 20807, 20848 Shintom 20072 Shogun 20240 Singer 20072 Sonic Blue 20614, 20616 Sony 20035, 20032, 20033, 20000, 20636, 21032, 21232, 21972 Stack 9 21972 STS 20042 Sylvania 20035, 20081, 20000, 20043, 20593, 21593, 21781 Symphonic 20000, 20593, 21593 Systemax 21972 Tagar Systems 21972 Teac 20000 Technics 20035, 20162 Teknika 20035, 20037, 20000 Thomas 20000 Tivo 20618, 20636, 20739, 21996 TMK 20240 Toshiba 20045, 20043, 20845, 21008, 21145, 21972, 21996 Totevision 20037, 20240

66 Touch 21972 Unitech 20240 Vector 20045 Vector Research 20038 Video Concepts 20045 Videomagic 20037 Videosonic 20240 Viewsonic 21972 Villain 20000 Voodoo 21972 Wards 20060, 20035, 20048, 20047, 20081, 20240, 20000, 20042, 20072, 20149 White Westinghouse 20209, 20072 XR-1000 20035, 20000, 20072 Yamaha 20038 Zenith 20039, 20033, 20000, 20209, 20479, 21479 ZT Group 21972

Setup Codes for Video Accessories ABS 01272 Accurian 01653 Alienware 01272 CyberPower 01272 D-Link 01554, 01731 Epson 01563 Escient 01151, 01370, 01371 Gateway 01272 Hewlett Packard 01272, 01267 Howard Computers 01272 HP 01272 Hush 01272 iBUYPOWER 01272 JVC 01384 LG 01415 Linksys 01272, 01365 Media Center PC 01272 Microsoft 01272 Mind 01272 Motorola 01363

67 Niveus Media 01272 Northgate 01272 Panasonic 01120 Pioneer 01010 Ricavision 01272 Roku 01486 Samsung 01190, 01490 Sensory Science 01126 Sharp 01010 Sony 01272, 01324, 01364 Stack 9 01272 Sylvania 01563 Systemax 01272 Tagar Systems 01272 Toshiba 01272 Touch 01272 Viewsonic 01272, 01329 Vizio 01126 Voodoo 01272 ZT Group 01272

68 69 Printed in China

0002992 Rev A