User Guide | Guide De L'utilisateur | Guía Del Usuario
Total Page:16
File Type:pdf, Size:1020Kb
User Guide | Guide de l’utilisateur | Guía del Usuario LCD TV | Téléviseur ACL | Televisor con pantalla LCD NS-LCD37 Important safeguards Insignia NS-LCD37 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This LCD TV television has been engineered and manufactured with the highest priority on safety. But improper use can result in potential electrical Contents shock or fire hazard. In order to prevent potential danger, please observe the following instructions Introduction . .1 when installing, operating, and cleaning the Safety information . .1 television. To ensure your safety and prolong the Features. .3 service life of your television, read the following Setting up your television. .6 precautions carefully before using the product. Using your television . .10 1 Read these instructions—All operating Maintaining. .20 instructions must be read and understood Troubleshooting . .21 before the product is operated. Specifications. .22 Programming the remote control . .22 2 Keep these instructions—These safety and Legal notices . .28 operating instructions must be kept in a safe Warranty. .31 place for future reference. Français. 32 3 Heed all warnings—All warnings on the Español . 64 product and in the instructions must be observed closely. 4 Follow all instructions—All operating Introduction instructions must be followed. Congratulations on your purchase of a 5 Do not use this television near water—for high-quality Insignia product. Your NS-LCD37 example, near a bathtub, washbowl, kitchen represents the state of the art in television sink, or laundry tub, in a wet basement, or design, and is designed for reliable and near a swimming pool. trouble-free performance. Do not use this television immediately after moving from a low temperature to high Safety information temperature environment, as this causes condensation, which may result in fire, Warning electric shock, or other hazards. To reduce the risk of fire or electric shock, do not expose your 6 Clean only with dry cloth—Unplug this television to rain or moisture. product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol Warning cleaners. Use a dry cloth for cleaning. For continued safety, replace safety critical components only with manufacturer’s recommended parts (refer to service 7 Ventilation—Do not block any ventilation literature). openings. Install in accordance with the manufacturer instructions. The vents and Electric shock warning other openings in the cabinet are designed for ventilation. Do not cover or block these CAUTION Risk of Electric Shock vents and openings since insufficient Do Not Open ventilation can cause overheating and/or shorten the life of the television. Do not place the television on a bed, sofa, rug or other Warning similar surface, since they can block To reduce the risk of electric shock, do not remove the cover or ventilation openings. This television is not back. There are no user-serviceable parts inside. Refer designed for a built-in installation. Do not servicing to qualified service personnel. place the television in an enclosed place This lightning flash with the arrowhead symbol such as a bookcase or rack, unless proper within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous ventilation is provided or the manufacturer's voltage within the television’s enclosure that may instructions are followed. be of sufficient magnitude to constitute a risk of electric shock to persons. 8 Heat sources—Do not install near any heat The exclamation point within an equilateral triangle sources such as radiators, heat registers, is intended to alert the user to the presence of stoves, or other apparatus (including important operating and maintenance (servicing) amplifiers) that produce heat. instructions in the literature accompanying the television. 9 Grounding or Polarization—Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has Warning two blades with one wider than the other. A This product utilizes tin-lead solder, and fluorescent lamp grounding type plug has two blades and a containing a small amount of mercury. Disposal of these third grounding prong. The wide blade or the materials may be regulated due to environmental considerations. For disposal or recycling information, please third prong are provided for your safety. If the contact your local authorities or the Electronic Industries provided plug does not fit into your outlet, Alliance: www.eia.org consult an electrician for replacement of the obsolete outlet. www.insignia-products.com 1 Insignia NS-LCD37 LCD TV 10 Power cord protection—Protect the power Reference Grounding component cord from being walked on or pinched particularly at plugs, convenience 5 Antenna discharge unit (NEC receptacles, and the point where they exit Section 810-20) from the television. 6 Ground clamp 11 Attachments—Only use attachments/ 7 Antenna lead-in wire accessories specified by the manufacturer. Do not use attachments not recommended • Use No. 10AWG (5.3 mm2) copper, by the manufacturer. Use of improper No. 8AWG (8.4 mm2) aluminum, attachments can result in accidents. No. 17AWG (1.0 mm2) copper-clad steel 12 Stand—Use only with the cart, stand, tripod, or bronze wire, or larger, as a ground wire. bracket, or table specified by the • Secure the antenna lead-in and ground manufacturer, or sold with the television. Do wires to the house with stand-off not place the television on an unstable cart, stand, tripod, or table. Placing the television insulators spaced from 4-6 feet (1.22-1.83 meter) apart. on an unstable base can cause the television to fall, resulting in serious personal injuries as • Mount the antenna discharge unit as well as damage to the television. When close as possible to where the lead-in mounting the television on a wall, be sure to enters the house. follow the manufacturer's instructions. Use • Use a jumper wire not smaller than only the mounting hardware recommended No. 6AWG (13.3 mm2) copper, or the by the manufacturer. equivalent, when a separate 13 Move carefully—When a antenna-grounding electrode is used. See cart is used, use caution ANSI/NFPA70. when moving the cart/ 15 Lightning—Unplug this television during television combination to lightning storms or when unused for long avoid injury from periods of time. tip-over. Sudden stops, For added protection for this television excessive force and equipment during a lightning storm, or when uneven floor surfaces it is left unattended and unused for long can cause the television periods of time, unplug it from the wall outlet to fall from the cart. and disconnect the antenna. This will prevent Never attempt to move the television unless damage to the equipment due to lightning the AC power cord has been disconnected. and power-line surges. 14 If an outside antenna or cable system is 16 Servicing—Refer all servicing to qualified connected to your television, make sure that service personnel. Servicing is required the antenna or cable system is grounded to when the television has been damaged in provide some protection against voltage any way, such as power-supply cord or plug surges and built-up static charges. Article is damaged, liquid has been spilled or objects 810 of the National Electrical Code, have fallen into the television, the television ANSI/NFPA 70, provides information with has been exposed to rain or moisture, does regard to proper grounding of the mast and not operate normally, or has been dropped. supporting structure, grounding of the lead-in 17 Replacement parts—In case the television wire to an antenna discharge unit, size of needs replacement parts, make sure that the grounding conductors, location of service person uses replacement parts antenna-discharge unit, connection to specified by the manufacturer, or those with grounding electrodes, and requirements for the same characteristics and performance as the grounding electrode. the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 7 18 Overloading—Do not overload wall outlets, 6 extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock. 5 4 19 Entering of objects and liquids—Never insert an object into the television through vents or 3 openings. High voltage flows in the television, 1 and inserting an object can cause electric 2 shock and/or short internal parts. For the same reason, do not spill water or liquid on Reference Grounding component the television. 1 Electric service equipment 2 Power service grounding electrode system (NEC Art 250, Part H) 3 Ground clamp 4 Grounding conductors (NEC Section 810-21) 2 www.insignia-products.com Insignia NS-LCD37 LCD TV 20 Damage requiring service—If any of the 25 Pixel defect—The display panel is a very high following conditions occurs, unplug the power technology television, giving you finely cord from the AC outlet, and request a detailed pictures. Occasionally, a few qualified service person to perform repairs. non-active pixels may appear on the screen • When the power cord or plug is damaged. as a fixed point of blue, green, or red. Please note that this does not affect the performance • When a liquid is spilled on the television of your television. or when objects have fallen into the television. Note to cable television system installer • When the television has been exposed to This reminder is provided to call the cable rain or water. television system installer’s attention to Section • When the television does not operate 820 40 of the NEC which provides guidelines for properly as described in the operating proper grounding and, in particular, specifies instructions. that the cable ground shall be connected to the Do not touch the controls other than those grounding system of the building, as close to the described in the operating instructions.