DOCSLIB.ORG

Eastern Washington Small-Scale Sawmills

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Eastern Washington Small-Scale Sawmills Eastern Washington Small-Scale Sawmills The following is a partial list of small-scale sawmill operations in eastern Washington. This database is intended to benefit those family forest owners that do not harvest the quantity of wood necessary to access Washington's traditional forestry infrastructure, and are looking for sawmills who will accept small quantities of logs. The list should also assist forest owners who wish to utilize timber from their own property, homeowners who would like to find a creative use for a backyard hazard tree, or woodcrafters looking for a local source of custom milled wood. No endorsement is implied nor intended for any business listed here, nor is exclusion from this list intended to be a negative endorsement. The directory is simply a listing of sawmill operators who responded to a phone call and agreed to be listed. The list is arranged geographically from north to south (approximately). The details following each listing's contact information include whether the mill is mobile (portable), its capacity, and other services provided by the sawyer. If you are a sawmill operator and would like to be included in this list, please contact Andy Perleberg at (509) 667-6540 or [email protected]. (This list was updated April, 2014) Matt Hobbs Precision Rough Cut Lumber Pend Oreille County Thomas Klemmeck (509) 442‐3578 157 Newby Cr. Rd [email protected] (509) 997‐9335 Diameter Capacity: 24” Diameter Capacity: 30” Sells lumber, trades for lumber, specialty sawing upon request Buys logs, Sells Lumber, Trade for lumber, Custom cutting, lap siding, post, beams, peel logs, built sheds Manley Portable Milling RMC Sawmill & Beamshop Okanogan, Ferry, Benton, Franklin and surrounding Richard McCormick counties Diameter Capacity: 36"+ Newport Washington Mobile Saw, will travel to remote locations, custom sawing 509‐720‐4654 hrly rates or by bf depending on job. [email protected] 509‐764‐1788 (home office) Mobile sawing at your jobsite, [email protected] specialty lumber milling to your specifications. Custom cut beams and mantles. Timberframe joinery equipment Hamilton Repair and Equipment Russ Stringfellow John Hamilton Fruitland, WA 20 W. Old Curlew Lake Rd. (509) 722‐3009 Republic, WA 99166 [email protected] (509) 775‐0191 Mobile Saw will travel 30 miles, Buy Diameter Capacity: 24” logs, Sells lumber, Trade for lumber, Buy logs, Sells Lumber, Trade for lumber swing blade Larry Lehrbas Mike Forsyth (509) 722‐5074 Springdale, WA Mobile Saw, Sells lumber, also has band saw sharpening T‐set (509) 723‐6999 Diameter Capacity: 52” Sells Lumber, Trade for Lumber, Large diameter, beams, timbers, dimensional lumber Howard Lindbeck Randy and Jane Pratt (425) 870‐9143 Republic, WA Mobile Saw, Sells Lumber (509) 775‐3205 or (360) 417‐3951 [email protected] Mobile Saw, Sells Lumber George Reinhart Greg Saltsman 3689 Fairview Canyon Wauconda, WA Monitor, WA 98836 (509) 486‐4095 (509) 782‐1579 [email protected] Diameter Capacity: 52” Diameter Capacity: 30” Mobile Saw, Trade for lumber or charge per hour or by board Buy logs, Sells Lumber, Trade for foot, Lap siding, specialty cutting Lumber, Large diameter timbers and mantles BW Wood Milling White Logging Brian Williams Tom white 4280 State Hwy 97 Twisp, WA Peshastin, WA 98847 (509) 997‐0279 [email protected] [email protected] Diameter Capacity: 48” Diameter Capacity: No Maximum Mobile saw , will travel 25 miles, Trade for lumber, Custom Mobile Saw, Buy logs, trade for sawing lumber or charge per board foot Paul Negherbon Forest Management Conner Custom Lumber Paul Negherbon Cle Elem, WA PO Box 974 (509) 4674‐2046? Republic, WA 99166 [email protected] (509) 207‐9130 Diameter Capacity: 96” [email protected] Buy logs, Sells lumber, Trade for No Diameter Limit lumber, Large log sawing Mobile Saw, Will travel to site Wildfire Fuels Management Jason & Greta Ireland / Clover Construction Co. I, LLC PH: 509‐304‐6078 / Email: [email protected] Website: Cloverconstruction.info Mobile saw, will travel up to 150 miles from Cle Elum Logs up to 35" diameter and 21' long Dimensional or custom lumber, lap siding Bonded & Insured / Construction projects with your knew lumber! Hrly rates, board foot rates, trade for logs Mobile Phone: (509) 304‐6078 Fax: (509) 674‐1633 Website: www.cloverconstruction.info http://www.facebook.com/cloverconstructioncleelum .
Load more

Recommended publications
  • Coco Lumber Sawdust
    MushroomPart II. Oyster Growers Mushrooms’ Handbook 1 Chapter 5. Substrate 91 Oyster Mushroom Cultivation Part II. Oyster Mushrooms Chapter 5 Substrate COCO LUMBER SAWDUST J. Christopher D. Custodio Bataan State College, the Philippines Oyster Mushrooms (Pleurotus spp.) are saprophytic as they obtain there nutrients by decomposing various agricultural by-products. This mushroom has been cultivated worldwide because of its taste and low maintenance technology. There are different substrates that have already been identified that can be utilized for the cultivation of oyster mushroom. The possible substrates include rice straw, coffee pulps, sawdust, and even paper. Most of these are types of low-value lignocellulosic wastes that are primarily derived from agricultural practices or the agro-industry. (J.A. Buswell et. al., 1996) The bioconversion of these wastes is one reason why the cultivation of edible mushrooms is an appropriate practice for a society that depends on its agriculture. In the early 1990s, ‘coco lumber’ was given a great attention in the province as a substitute for hardwood. Sawmills producing lumber from coconut trees bloomed in reaction to the increasing demand for this low cost constructional material. Though beginners in mushroom cultivation are usually persuaded not to use sawdust from softwoods, sawdust from coco lumber (Fig. 1) is another possible substrate for P. ostreatus and has shown great results. Growers living near a coco lumber sawmill can make use of this waste product in order to start their own cultivation of oyster mushroom species. Figure 1. Coco lumber sawdust Coco Lumber Sawdust as a Substrate of Oyster Mushroom Oyster mushroom is one example of edible mushrooms that can utilize lignocellulosic materials as a substrate.
    [Show full text]
  • Section 061053 - Miscellaneous Rough Carpentry
    SECTION 061053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Wood framing, blocking, and nailers 2. Wood battens, shims, and furring (for wall panel attachment). 3. Plywood sheathing for miscellaneous structures and replacement of deteriorated roof sheathing. B. Related Sections include the following: 1. Section 075216 "SBS Modified Bituminous Membrane Roofing" for adhesively applied 2-ply, SBS bituminous membrane roofing, with self-adhered base ply sheet. 2. Section 076200 "Sheet Metal Flashing and Trim" for installing sheet metal flashing and trim integral with roofing. 1.3 DEFINITIONS A. Dimension Lumber: Lumber of 2-inches nominal or greater but less than 5-inches nominal in least dimension. B. Lumber grading agencies, and the abbreviations used to reference them, include the following: 1. NLGA: National Lumber Grades Authority. 2. WCLIB: West Coast Lumber Inspection Bureau. 3. WWPA: Western Wood Products Association. 1.4 QUALITY ASSURANCE A. Testing Agency Qualifications: For testing agency providing classification marking for fire- retardant treated material, an inspection agency acceptable to authorities having jurisdiction that periodically performs inspections to verify that the material bearing the classification marking is representative of the material tested. PRSD – Thompson Elementary School Roof Replacement 061053 – MISCELLANEOUS ROUGH CARPENTRY July, 2012 Page 1 of 7 B. Forest Certification: For the following wood products, provide materials produced from wood obtained from forests certified by an FSC-accredited certification body to comply with FSC 1.2, "Principles and Criteria": 1.
    [Show full text]
  • Environmental Considerations of Treated Wood National Park Service – Pacific West Region
    Environmental Considerations of Treated Wood National Park Service – Pacific West Region Overview In support of the mission of the National Park Service, making wise decisions about using wood treatments will help protect the natural areas and biodiversity of our parks, and the health of our employees. Preservative-treated wood’s most important benefit is its resistance to water, fungal, and insect damage. Extending the life of wood products reduces the demands on forests for replacement lumber and reduces maintenance and replacement costs. Historic wooden structures that must be repaired with compatible materials or replaced with in-kind materials make durability even more important. Treated woods are nearly impervious to rot and insects, making them good for outdoor use. Wood treated with chromated copper arsenate (CCA) poses certain environmental and health risks, including the leaching of chemicals such as arsenic and chromium into the environment and workers’ risk of exposure to hazardous chemicals. Disposal of treated wood also proves to be an issue, particularly disposal by incineration. Due to these concerns, manufacturers of treated wood and the EPA reached an agreement to end the sale of CCA-treated wood for most lumber products, effective January 1, 2004. The following offers less-toxic alternatives to CCA, handling and use precautions, and other recommendations when considering using treated wood. Due to the toxicity and potential effects on health and the environment, the Presidio Trust implemented a policy on the use of pressure treated lumber. Standard operating procedure now prohibits the use of CCA, ACZA, CZC, ACC, and Pentachlorophenol. All dimensional lumber is now treated with ACQ as an alternative.
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • UFGS 06 10 00 Rough Carpentry
    ************************************************************************** USACE / NAVFAC / AFCEC / NASA UFGS-06 10 00 (August 2016) Change 2 - 11/18 ------------------------------------ Preparing Activity: NAVFAC Superseding UFGS-06 10 00 (February 2012) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in agreement with UMRL dated July 2021 ************************************************************************** SECTION TABLE OF CONTENTS DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES SECTION 06 10 00 ROUGH CARPENTRY 08/16, CHG 2: 11/18 PART 1 GENERAL 1.1 REFERENCES 1.2 SUBMITTALS 1.3 DELIVERY AND STORAGE 1.4 GRADING AND MARKING 1.4.1 Lumber 1.4.2 Structural Glued Laminated Timber 1.4.3 Plywood 1.4.4 Structural-Use and OSB Panels 1.4.5 Preservative-Treated Lumber and Plywood 1.4.6 Fire-Retardant Treated Lumber 1.4.7 Hardboard, Gypsum Board, and Fiberboard 1.4.8 Plastic Lumber 1.5 SIZES AND SURFACING 1.6 MOISTURE CONTENT 1.7 PRESERVATIVE TREATMENT 1.7.1 Existing Structures 1.7.2 New Construction 1.8 FIRE-RETARDANT TREATMENT 1.9 QUALITY ASSURANCE 1.9.1 Drawing Requirements 1.9.2 Data Required 1.9.3 Humidity Requirements 1.9.4 Plastic Lumber Performance 1.10 ENVIRONMENTAL REQUIREMENTS 1.11 CERTIFICATIONS 1.11.1 Certified Wood Grades 1.11.2 Certified Sustainably Harvested Wood 1.11.3 Indoor Air Quality Certifications 1.11.3.1 Adhesives and Sealants 1.11.3.2 Composite Wood, Wood Structural Panel and Agrifiber Products SECTION 06 10 00 Page 1 PART 2 PRODUCTS 2.1 MATERIALS 2.1.1 Virgin Lumber 2.1.2 Salvaged Lumber 2.1.3 Recovered Lumber
    [Show full text]
  • Presentazione WE 2021
    Wood-Experience Veronafiere, 3-6 March 2021 Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience The reasons for a new Event Wood Experience represents the evolution and development of Legno & Edilizia, a trade exhibition that has represented the reference point for the wooden construction sector for 20 years. Faithful to Piemmeti's vocation of specialization in the wood supply chain, a material symbol of natural values, sustainability and savings, Wood-Experience is the only meeting platform for the sector. It represent an important business and international exchange opportunity, along with a great occasion to shine a light and to draw the Media’s attention on the sector. For this reason, “Wood-Experience” will propose both to exhibitors and visitors a focused trade fair format that will takle into consideration the new business needs, safety and internationality. Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience Tecnologies for the wood supply chain Wood Experience is the only Italian Event dedicated to the entire wood supply chain. A supply chain exhibition proposal that starts from the forest and the sawmill, has its core business in woodworking machines, both for construction / structural purposes and for furniture / furnishings, to arrive at finishing, treatment and processing complement. Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience The product chain • Machines and technologies for primary wood processing (forest) • Technology for sawmills • Woodworking machines: For construction
    [Show full text]
  • Wood from Midwestern Trees Purdue EXTENSION
    PURDUE EXTENSION FNR-270 Daniel L. Cassens Professor, Wood Products Eva Haviarova Assistant Professor, Wood Science Sally Weeks Dendrology Laboratory Manager Department of Forestry and Natural Resources Purdue University Indiana and the Midwestern land, but the remaining areas soon states are home to a diverse array reforested themselves with young of tree species. In total there are stands of trees, many of which have approximately 100 native tree been harvested and replaced by yet species and 150 shrub species. another generation of trees. This Indiana is a long state, and because continuous process testifies to the of that, species composition changes renewability of the wood resource significantly from north to south. and the ecosystem associated with it. A number of species such as bald Today, the wood manufacturing cypress (Taxodium distichum), cherry sector ranks first among all bark, and overcup oak (Quercus agricultural commodities in terms pagoda and Q. lyrata) respectively are of economic impact. Indiana forests native only to the Ohio Valley region provide jobs to nearly 50,000 and areas further south; whereas, individuals and add about $2.75 northern Indiana has several species billion dollars to the state’s economy. such as tamarack (Larix laricina), There are not as many lumber quaking aspen (Populus tremuloides), categories as there are species of and jack pine (Pinus banksiana) that trees. Once trees from the same are more commonly associated with genus, or taxon, such as ash, white the upper Great Lake states. oak, or red oak are processed into In urban environments, native lumber, there is no way to separate species provide shade and diversity the woods of individual species.
    [Show full text]
  • Portable Sawmill Operators List
    Portable Sawmill Operators N.C. Forest Service District 11 Alamance, Caswell, Durham, Granville, Orange, Person, Vance, and Wake Company Ansel Currin Company Steve Allred Name Name Business Phone 919-482-9119 Business Phone 336-260-1557 Mobile Phone Mobile Phone Fax Number Fax Number Address 1657 Elam Currin Rd Address 1867 Milesville Rd. City Oxford City Elon State NC State NC ZIP 27565 ZIP 27244 Email: Email: Special Special *will pick up logs 10 to 20 mile radius of Instructions: Instructions: mill site Company Lynch Co, LLC Company Carolina Custom Cut L.L.C. Name Roy Lynch Name Jay Minnich Business Phone 919-414-0565 Business Phone 919 548-2884 Mobile Phone Mobile Phone Fax Number Fax Number Address 9801 Adlie Dr Address City Wake Forest City State NC State ZIP 27588 ZIP Email: [email protected] Email: [email protected] Special Special Instructions: Instructions: Thursday, May 6, 2021 Page 1 of 4 Company Company The Sawmill Man Name Ricky Pope Name Jason Lowe Business Phone 919-638-0584 Business Phone 336 895-3098 Mobile Phone Mobile Phone Fax Number Fax Number Address 1407 John Jones Rd. Address 2021 Bell Rd City Bahama City Gibsonville State NC State NC ZIP 27503 ZIP 27249 Email: Email: [email protected] Special Special Instructions: Instructions: Company Shane’s Portable Sawmill Company Name Shane Clark Name Jim Dunbar Business Phone 336-516-8126 Business Phone 919-543-5923 Mobile Phone 336-586-0655 Mobile Phone 919-362-5731 Fax Number Fax Number Address Address 8016 Hollander Place City Burlington City Raleigh
    [Show full text]
  • Small Scale Teak Plantations in Luang Prabang Province, Lao
    Small scale teak plantations in Luang Prabang province, Lao PDR - Silviculture, ownership and market ii Foreword This minor field study (MFS) was carried out as part of the requirements and corresponds to 10 credits on C level. The Department of Silviculture at the Swedish University of Agriculture Sciences has planned the study in co-operation with the National Agriculture and Forestry Research Institute (NAFRI) in Lao PDR with the objective to describe the silviculture practise in teak plantations established by small-scale farmers. Besides bio- physical aspects, tenure and market prospects both for plantations as well as for the wood have been discussed. Acknowledgement This study was funded by Sida (Swedish International Development Agency) as an MFS (Minor Field study). The MFS was hosted by the Lao-Swedish Upland Agriculture and Forestry Research Programme (LSUAFRP) which is a programme financed by Sida and run by the National Agriculture and Forestry Research Institute of Lao PDR (NAFRI) and Scandia consult Natura (SCC). The MFS took in place in Lao PDR in August and September 2003 and was written in Sweden later that year. We, Niklas Fogdestam and Helena Gålnander, would like to thank the following persons for their support and assistance during the time we have been working with this project: Mr Houmchitsavath, our guide and interpreter during the field days in Pone Xay district. Mr Olle Forshed, our mentor in professional as well as social life in Lao PDR. Mr Robert Nygård, our manager and supporter in Sweden who encouraged us to study our data more thoroughly than we thought possible.
    [Show full text]
  • Lumber and Related Products; a Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond
    4-f,r ' DOCUMENT RESUME ED 031 558 VT 007 859 Lumber and Related Products; A Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond. Pub Date Aug 68 Note-108p.; From NDEA Inst. on Wood Technology (Eastern Kentucky UM, June 10-Aug. 2, 1968). EDRS Price MF-$0.50 HC-$5.50 Descriptors-*Building Materials, Curriculum Development, *Curriculum Guides, *Industrial Arts, Instructional Improvement, Lumber Industry, *Resource Materials, Summer Institutes, Teacher Developed Materials, Teacher Education, *Woodworking Identifiers-*National Defense Education Act Title XI Institute, NDEA Title XI Institute Prepared by participants in the 1%8 National Defense Education Act Institute on Wood Technology, this syllabus is one of a seriesof basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and .content of their programs. The primary objective of this course outhne is to point out the importance and the many uses of wood and wood products. Topics covered are: (1 )Lumber Grades and Sizes,(2)Plywood,(3)Veneer,(4)Fiberboard,(5) Particleboard,(6)Sheetboard,(7)InsulationBoard,(8)StructuralSandwich Construction,(9)Shingles,(10)Pulp and Paper,(11) Wood Flour,and (12) Cellulose-DerivedProducts.Mostunitscontain 'informationonmanufacturing processes, properties,types and grades, and uses of the products. Selected bibliographies are listed for each unit. The final section provides instructional aids, suggested projects and student activities, and materials and equipment needed for specific prolects. The document is &strafed with drawings, charts, and photographs. Related documents are available as VT 007 857, VT 007 858, and VT 007 861: (AW) ft; LUMBER BAS YLLABUS ON WOOD CHNOLOGY .:'Pre,pare4 by INSTITUTE.
    [Show full text]
  • Architectural Woodwork Standards, 2Nd Edition
    Architectural Woodwork Standards WALL/CEILING SURFACING & PARTITIONS 8S E C T I O N SECTION 8 Wall/Ceiling Surfacing and Partitions table of contents INTRODUCTORY INFORMATION COMPLIANCE REQUIREMENTS Guide Specifications ...........................................................................194 GENERAL Introduction .........................................................................................195 Basic Considerations ....................................................................212 Wall and Ceiling Surfacing ..................................................................195 Grades .....................................................................................212 Opaque .........................................................................................195 Economy ...........................................................................212 Transparent ..................................................................................195 Custom ..............................................................................212 Contract Documents ...........................................................................195 Premium ............................................................................212 Product Advisory .................................................................................195 Grade Limitations ..............................................................212 Panel Sequence ..................................................................................196 Contract Documents
    [Show full text]
  • The Rise of Pine
    building history The rise of pine Relative newcomer Pinus radiata quickly established itself as a worthy substitute for diminishing native timber resources, but not without first overcoming preservation issues. By Nigel Isaacs, BRANZ Principal Scientist and Teaching/Research Fellow, School of Architecture, Victoria University of Wellington nce New Zealand had started down was followed by an expansion of state exotic mill were built of pine produced by the nearby the path of timber buildings, the slow- afforestation in the decade to 1935. Waotu sawmill. An early resident remembers growing native timbers were rapidly From the late 1920s private commercial the weekly weighing of a floorboard to O consumed. By the 1950s, only nine interests actively sought finance to plant forests, determine how much moisture it had absorbed. native tree species were used to any extent: often through the issue of private company A preservation plant was also set up based on ❚ Softwoods – kauri, rimu, matai, totara, bonds – a practice that accelerated out of two pressure cylinders obtained from a defunct kahikatea and miro. control until the Bondholders Incorporation Act concrete block plant in South Auckland and a ❚ Hardwoods – tawa, red and silver beech. 1934 –5 brought order to the chaos. One of boiler from a sawmill in Tauranga. Although The dwindling supplies of native timber were the companies to emerge from this was New built to last only 10 years, the Pinedale sawmill replaced by a relative newcomer – the exotic Zealand Forest Products Ltd. continued to be used into the 1980s. Pinus radiata. By the late 1950s, it had become In 1939, Pinedale was established (about It soon became obvious that uses had to be ‘second only to rimu in commercial importance’.
    [Show full text]