Mec Defoamer Wb 500 Safe Water Based Defoamer

Total Page：16

File Type：pdf, Size：1020Kb

MEC DEFOAMER WB 500 SAFE WATER BASED DEFOAMER EVIRONMENTELLY SAFE - NONPOLLUTING - NONFLAMMABLE - NONTOXIC - BIODEGRADABLE Provides excellent defoaming power in all applications including extreme acid’s and alkalizes. Controls all types of foam in sewage aerators, digesters, scum blankets, cooling towers, industrial cleaning operations, pulp and paper production, and other applications where foaming is a problem. DIRECTIONS: SEWAGE PLANTS: For long-term foam control in activated sludge plant, aeration tanks, digesters, sewage entry, or effluent lines. This low viscosity formulation that requires no pre-dilution to achieve complete and rapid foam control. Attach a small valve to the small bung of the defoamer drum and run a small tubing to the entry fume of the aeration tank or area where foaming of waste occurs. Drip 1 quart to 1 gallon of de-foamer per 10,000 gallons of waste (25-100ppm) to stop foaming and allow the aerators and digesters to function at maximum capacity and efficiency. For immediate foam relief, over spray the area with a diluted (1-10) of the anti-foam. INDUSTRIAL CLEANING & WASTE DEFOAMING: Spray or drip small amounts of de-foamer (100-200ppm) into the water-based system to control or eliminate foam. The defoamer does not affect paper processing, cleaning, cooling tower, or industrial processes. For quick foam knockdown, spray foam with a solution of the defoamer. FOR INDUSTRIAL USE ONLY CAUTION: Keep out of the reach of children. Mild eye irritant. Wash eyes with water until irritation stops. Prolonged contact can irritate the skin. Wash from skin with soap and water. Ingestion in quantity can cause severe diarrhea. Treat as soap ingestion. EMERGENCY PHONE: 800-424-9300 / Reference Code: MTEQ / Product Code: 037 379 Shoemaker St., Nanty Glo, PA 15943 814-749-9015 / 800-831-4963 / Fax 888-536-3795 www.mecchemicals.com .

Copy Link

Recommended publications

Defoamer Formulation Entschäumerzusammensetzung Composition Antimousse
(19) TZZ ¥ZZ_T (11) EP 2 430 095 B1 (12) EUROPEAN PATENT SPECIFICATION (45) Date of publication and mention (51) Int Cl.: of the grant of the patent: C08L 33/06 (2006.01) B01D 19/04 (2006.01) 07.03.2018 Bulletin 2018/10 (86) International application number: (21) Application number: 10720061.0 PCT/US2010/033827 (22) Date of filing: 06.05.2010 (87) International publication number: WO 2010/132262 (18.11.2010 Gazette 2010/46) (54) DEFOAMER FORMULATION ENTSCHÄUMERZUSAMMENSETZUNG COMPOSITION ANTIMOUSSE (84) Designated Contracting States: • WILSON, Robert AL AT BE BG CH CY CZ DE DK EE ES FI FR GB Marietta, GA 30060 (US) GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO • ROSENCRANCE, Scott PL PT RO SE SI SK SM TR Douglasville, GA 30135 (US) • PREVIS, David (30) Priority: 15.05.2009 US 466637 King William, VA 23086 (US) (43) Date of publication of application: (74) Representative: Potter Clarkson LLP 21.03.2012 Bulletin 2012/12 The Belgrave Centre Talbot Street (73) Proprietor: Kemira Chemicals Inc. Nottingham NG1 5GG (GB) Atlanta GA 30339 (US) (56) References cited: (72) Inventors: GB-A- 2 094 330 US-A- 5 152 925 • MARTIN, James Bonaire, GA 31005 (US) Note: Within nine months of the publication of the mention of the grant of the European patent in the European Patent Bulletin, any person may give notice to the European Patent Office of opposition to that patent, in accordance with the Implementing Regulations. Notice of opposition shall not be deemed to have been filed until the opposition fee has been paid.
[Show full text]
The Activated Sludge Process Part 1 Revised July 2014
Wastewater Treatment Plant Operator Certification Training Module 15: The Activated Sludge Process Part 1 Revised July 2014 This course includes content developed by the Pennsylvania Department of Environmental Protection (Pa. DEP) in cooperation with the following contractors, subcontractors, or grantees: The Pennsylvania State Association of Township Supervisors (PSATS) Gannett Fleming, Inc. Dering Consulting Group Penn State Harrisburg Environmental Training Center MODULE 15: THE ACTIVATED SLUDGE PROCESS - PART 1 Topical Outline Unit 1 – General Description of the Activated Sludge Process I. Definitions A. Activated Sludge B. Activated Sludge Process II. The Activated Sludge Process Description A. Organisms B. Secondary Clarification C. Activated Sludge Process Control III. Activated Sludge Plants A. Types of Plants B. Factors that Upset Plant Operation IV. Unit Review V. References Unit 2 – Aeration I. Purpose of Aeration II. Aeration Methods A. Mechanical B. Diffused III. Aeration Systems A. Mechanical Aeration Systems B. Diffused Aeration Systems Bureau of Safe Drinking Water, Department of Environmental Protection Wastewater Treatment Plant Operator Training i MODULE 15: THE ACTIVATED SLUDGE PROCESS - PART 1 IV. Safety Procedures A. Aeration Tanks and Clarifiers B. Surface Aerators C. Air Filters D. Blowers E. Air Distribution System F. Air Headers and Diffusers V. Review VI. References Unit 3 – New Plant Start-Up Procedures I. Purpose of Plant and Equipment Review A. Document Familiarization B. Equipment Familiarization II. Equipment and Structures Check A. Flow Control Gates and Valves B. Piping and Channels C. Weirs D. Froth Control System E. Air System F. Secondary Clarifier III. Process Start-Up A. Process Units B. Process Control IV. Unit Review V.
[Show full text]
Labels of Pesticides Used with This Product
Brandt® Organics Defoamer Antifoaming / Defoaming Agent KEEP OUT OF REACH OF CHILDREN Principal Functioning Agents: Silica filled polydimethylsiloxane .................10% WARNING Constituents ineffective as spray adjuvant ....... 90% Total........................................... 100% PRECAUTIONARY STATEMENTS CA Reg. No. 48813-50022-AA HAZARDS TO HUMANS AND DOMESTIC ANIMALS DIRECTIONS FOR USE WARNING: Causes serious eye irritation. Causes skin irritation. Wear protective eyewear, long sleeved shirt, long pants, shoes BRANDT ORGANICS DEFOAMER is a high quality silicone based plus socks and chemical resistant gloves made of any waterproof anti-foaming agent designed to prevent foam formation or defeat material when mixing or handling concentrate. Wash thoroughly existing foams in pesticide spray solutions. Excessive foaming with soap and water after handling and before eating, drinking, can promote inefficiency in spray activities. It may be used on chewing gum, using tobacco, or using the toilet. Remove and wash agricultural, forestry, turf and ornamental, industrial, structural contaminated clothing before reuse. and non-cropland sites. Not for aquatic use. Read and follow the precautions, restrictions and recommendations ENVIRONMENTAL HAZARDS on the labels of pesticides used with this product. Use according to Do not contaminate water when cleaning equipment or disposing the most restrictive label directions for each product in any tank mix. of equipment washwaters. COMPATIBILITY: BRANDT ORGANICS DEFOAMER is compatible FIRST AID with most pesticides. However, if the desired combination has Have the product container or label with you when calling a poison not been previously used, a compatibility test is recommended. control center or doctor or going for treatment. MIXING: Fill spray tank 1/2 full of water and begin agitation.
[Show full text]
Glossary: Wastewater Treatment and Collection System Terms
Glossary September 2011 Wastewater Treatment Collection System &Terms Minnesota Pollution Control Agency 520 Lafayette Road North St. Paul, Minnesota 55155-4194 wq-wwtp8-20 Contents Wastewater Treatment and Collection System Terms A ........... 3-6 G ...... 24-25 M ..... 29-31 S ........ 42-51 B ........... 7-9 H ....... 26-27 N ....... 32-33 T ........ 52-54 C ....... 10-15 I ......... 27-28 O ...... 33-35 U ............ 54 D ....... 15-19 J ............. 28 P ....... 35-40 V ....... 55-56 E ........ 19-21 K ............ 28 Q ............ 40 W ...... 56-57 F ........ 21-24 L ............. 29 R ....... 40-42 Z ............. 57 Acknowledgement Special thanks to Ken Kerri at California State University, Sacramento, for use of the glossary that appears in his self-study training courses, “Operation and Maintenance of Wastewater Collection Systems” and “Operation of Wastewater Treatment Plants.” A special acknowledgement to the Water Environment Federation for the use of their wastewater glossary for some of the definitions in this manual. Contributors Kay Curtin Steve Duerre Gene Erickson Editing and Graphic Design Nancy Ellefson This document was printed on 30 percent post-consumer recycled paper manufactured without the use of elemental chlorine. 2 Minnesota Pollution Control Agency | All rights reserved. Wastewater Treatment and Collection System Terms A absorption The taking up of one substance into the body of another by chemical or molecular action after the adsorbtion process. accuracy In physical measurements, it is the degree of agreement between the quantity measured and the actual quantity. It should not be confused with ‘precision,’ which denotes the reproducibility of the measurement. acid A substance that yields hydrogen ions when dissolved in water resulting in a pH of less than 7; it can react with bases and certain metals to form salts.
[Show full text]
Predicting Defoamer Performance in Coating Formulations
Predicting Defoamer Performance in Coating Formulations C. James Reader and K.T. Griffin Lai Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195-1501 C. James Reader, [email protected], 610-481-7380 K.T. Griffin Lai, [email protected], 610-481-7069 Introduction What is the usual procedure for finding a defoamer for a new waterborne coating formulation? For many companies, the procedure appears to be as follows: try the defoamers that you currently use and know; if these don’t work then try samples in the lab, ask a colleague or friend or, maybe, ask a supplier. This approach makes good sense when working with formulations that are similar, as defoamers will usually give consistent performance in similar formulations. However, when these tried and trusted defoamers don’t work, the Chemist has the frustrating task of trying to find a suitable product from a large selection of mysterious bottles on his or her lab bench. There is a truism in England that goes “if all else fails, read the instructions”; however, defoamers don’t usually come with instructions. Wouldn’t it be nice if they did? The difficulties in finding a suitable defoamer exist because the performance of each and every defoamer is affected by the formulation it is used in; change the formulation and the defoamer performance may often change as well. Defoamer selection is also one of the last steps in readying a formulation for final use, so the rest of the formulation is already mostly decided and the defoamer has to work with this.
[Show full text]
Industrial Fluids
INDUSTRIAL FLUIDS ADDITIVES For more than 180 years, MÜNZING has been Defoamer Technology helping its customers perfect their products by What is Foam? 1 creating specialty additives that are precisely right for them. Headquartered in Abstatt, Germany, Product Offerings our manufacturing plants in North America and Germany have broad synthesis and formulation Metalworking 2 capabilities to best serve our global customer base. Tankside Defoamers 3 MÜNZING has a presence in more than 40 countries Industrial Cleaners 4 and is a technology-driven organization with an extensive network of highly skilled R&D and Antifreeze, Engine Coolants and De-Icing 5 technical service professionals. Our additives have achieved worldwide recognition for their Non-Aqueous Lubricants 6 performance, quality and technical innovation. Energy – Oil Field 7 This first-class product line includes defoamers, dispersants, rheology modifiers, emulsifiers, Surface Finishing 8 wetting and leveling agents, micronized and coated waxes, and wax dispersions and emulsions. Test Methods of IFL Applications 9 If you have a specific challenge, we have the Evaluation of Compatibility 9 technical expertise and laboratory capabilities Foam Tests: Aqueous Applications 10 to craft a unique solution. As a highly regarded, privately owned company, MÜNZING is committed Foam Tests: Non-Aqueous Applications 11 to providing an unmatched level of technical service to all of our customers and to ensuring Additive Products, Theory and Application that our products deliver optimal performance.
[Show full text]
Z-90 Defoamer -Food Grade Defoamer
Z-90 Defoamer -Food Grade Defoamer- Technical Information Product Description Z-90 Defoamer food-grade antifoaming agent is a water-based silicone emulsion designed to control foam in aqueous food processing applications. The functional properties developed especially for these antifoams is to eliminate and prevent excessive foam, which include: quick dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system. The primary active ingredient, polydimethyl siloxane, is an FDA-approved liquid silicone polymer. It is USDA approved to be used in cleaning solutions and also as a direct additive to food products. Z-90 Defoamer functions both as an antifoam (prevents foam formation) and as a defoamer (collapses foam formation). Z-90 Defoamer utilizes only food-grade, nonionic emulsifiers; and contains only ingredients that are recognized by qualified experts as safe in food products according to the Code of Federal Regulations, Title 21, Part 173.340. It may therefore be used as direct food additives in most foods. As a processing aid, Z-90 Defoamer is considered a "secondary direct food additive" and imparts no flavor, odor, or functional attributes to the food. Anderson Chemical Company certifies that this product is acceptable for use as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices in all departments and as a foam control compound (former USDA A1, Q5 authorization). Properties Form.................................................................................. White viscous liquid Specific Gravity,Density.................................................. 1.00@68°F, 8.33 lb./gal. Viscosity........................................................................... 1,000-4,000 cP @20 rpm pH, (Neat - as is)............................................................... 7.5-8.25 Foaming Tendency.........................................................
[Show full text]
Oil Production in Libya Using an ISO 14001 Environmental Management System
Oil production in Libya using an ISO 14001 environmental management system To the Faculty of Geosciences, Geo-Engineering and Mining (3) Of the Technische Universität Bergakaemie Freiberg is submitted this THESIS To attain the academic degree of Doktor ingenieur (Dr.-ing.) submitted by BSc. petroleum engineer MSc. petroleum engineer Biltayib. M. Biltayib born on 17 February in 1974, Sirte, Libya Freiberg, 06. 01. 2006. Date of submission Dedication To my father and mother who supported me and lighted up my life since my birth to this date. To my brothers and sisters for their effort, moral support and endless encouragement. Biltayib. M. Biltayib 2 Acknowledgements First of all I wish to express my sincere thanks and gratitude to my supervisor Prof. Dr. Jan C. Bongaerts for their friendly assistance, guidance, discussion and criticism that made study interesting and successful. I am grateful to the staff of IMRE, TU Bergakademic Freiberg, Dipl.-Ing. Stefan Dirlich, Kristin Müller, who gave useful contributions at various times during the development of this thesis. I appreciate the support of the staff of AGOCO , Dipl.-Ing. Soliman Daihoum, Mr. Hassan Omar, Dipl.-Ing Ibrahim Masud during the data collection. Finally thanks to my special friends, Dr. Mohamed Abdel Elgalel, khalid kheiralla, Khaled raed, Dr. Aman Eiad , Dr. Saad Hamed, Mahmud Guader, Samuel Famiyeh, Abdallminam, Salem kadur, Abdalgader Kadau , Mohammed Mady, Abu yousf and his familly, Nizar and his son Rany, Mohammed Adous, Mohammed Almallah, Mustafah Wardah, Ali almagrabia, Samer, Ali almear, Ahamed Alkatieb, Mohammed Almasrea, salahedeen keshlaf , Radwan Ali Sead, Sadek Kamoka , Mohamed Arhuom, Dr. Abdalla Siddig, Mahmud Aref , Mohamed Nasim for their encouragement, advise and support during my stay in Germany.
[Show full text]
Defoamers & Antifoams
MUNICIPAL & INDUSTRIAL WASTEWATER TREATMENT Defoamers & Antifoams Effluent foaming or excessive foaming in a treatment process is not only a detriment to the discharge quality but also to treatment operations. Often, the application of a defoamer/anti- foam is all that is required to eliminate foaming issues. Foaming, often caused by excessive phosphorus, residual surfactants, or young/old biomass, are the most prevalent forms of foaming conditions seen in many treatment processes. Correctly addressing these foaming issues can rid the treatment process outfall of unsightly scum — improving the overall treatment process and ensuring that receiving stream quality standards are met. Coyne Environmental is uniquely positioned with the most comprehensive collection of treatment options available to assist the municipal and industrial water and wastewater treatment industries in meeting your specific treatment goals. www.coyneenvironmental.com MUNICIPAL & INDUSTRIAL WASTEWATER TREATMENT Defoamers & Antifoams Nocardia foaming is a tenacious, unsightly thick brown foam found in many biological processes which carries over into secondary clarifier and digester operations. Besides staining the surrounding surfaces, Nocardia reduces the transfer of oxygen in aeration onesz and hinders settling in the clarification stages leading to TSS carryover. It also infiltrates the digester operations reducing efficiencies and causes operational issues such as capacity limitations, overflowing, and gas production. Damage can also occur to various treat- ment processes due to entrained air. Reducing foaming due to Nocardia enhances treatment parameters but also benefits aesthetic and housekeeping issues allowing for a cleaner operation. Other wastewater treatment applications such as solids separation operations are also treated with defoamers. By dosing in drain lines from DAF’s, belt thickeners, and points of discharge from centrifuges, filtrate/centrate lines can be kept free of foam and flowing evenly without backups and overflows.
[Show full text]
Select the Right Brown Stock Defoamer for Your Washing Operations
Select the Right Brown Stock Defoamer for your Washing Operations Harold Petke, Senior Technical Adviser, Pulp ‐ Solenis LLC Michael Wang, Ph. D. Senior Application Manager, Solenis LLC Keywords: Brown stock washing (BSW), silicone defoamer, defoamer selection, washing aid, washing efficiency, operational cost reduction, silicone carryover, bleach chemical cost ABSTRACT: Brown Stock Washing is a critical step for optimizing production as well as controlling production costs. There are many different washing systems in use with a variety of configurations and characteristics influenced by fiber morphology, liquor parameters, etc., all with their own advantages and limitations. A common thread amongst all of the variations is that to operate beyond a very rudimentary level, they all use defoamer chemistry to function efficiently. With each process being unique in terms of configuration, equipment technology, capacity, process constraints, and control strategy, etc., how do you select the right defoamer for your washing operations? This paper reviews the selection criteria and methodology for determining the right product for any BSW system. The implications of product chemistry and characteristics are covered as well as the process characteristics and impacts of control strategies. By broadening the view beyond lab screening or what is being used at another location, selecting the optimal defoamer for a washer system is a comprehensive approach that rewards the operation with the best cost performance. INTRODUCTION: Pulp washing is crucial to the economics of chemical pulp manufacturing. The washing process separates fibers from the chemicals and dissolved wood components generated during the cooking process. Washed pulp quality is always weighed against production rate, bleaching costs, evaporator loading and make-up chemical costs.
[Show full text]
Defoamers for Paints and Coatings
Defoamers for paints and coatings Selecting the best defoamer for a given formulation requires finding a balance between the defoaming power or strength of the defoamer and the compatibility and solubility of the defoamer in the system. Defoamers that are highly incompatible may give very effective foam control but may also cause surface defects, whereas more compatible defoamers may not give effective foam control. Increasing the defoamer use level can improve foam control but may also increase surface defects. The selection of a defoamer for a given formulation must take into consideration many factors, including the coating raw materials, method of manufacture, means of application, and cure conditions. Air Products offers a full spectrum of defoamer chemistries and formulations, including organic oil-based, mineral oil-based, siloxane-based and our own unique molecular defoamers based on Gemini technology. When selecting a defoamer, it is important to consider how all factors affect defoamer performance as well as the defoamer compatibility in a given formulation; therefore, defoamers must always be screened for suitability. The selector guide suggests the appropriate starting defoamers to screen, based on the formulation type and application method. Very suitable Point of Suitable addition Pigmentation Interior paints Exterior paints Coating Defoamer Defoamer type Grinding stage stage Letdown Pigmented Unpigmented Flat/satin Semigloss High-gloss Flat/satin Semigloss Gloss 2K epoxy 2K PU Acrylic Alkyd Polyester PU PU/acrylic acrylic
[Show full text]
Evaluation of New Antifoaming Agents on Egyptian Lubricating Oil
10th International Conference on Advances in Science, Engineering and Technology (ICASET-18) June 20-21, 2018 Paris (France) Evaluation of New Antifoaming Agents on Egyptian Lubricating Oil M. Abd-Elfattah , H. Salah and R. Farouq foaming increases. Such conditions also degrade other Abstract— Antifoam agents is a common additive in many types properties of oil, like emulsion forming tendency and air of lubricating oils and hydraulic fluids. These additives can detect Entrainment. The best method to control these properties is to when the useful life of a lubricant is over, but fall short when eliminate contaminant as soon as these are generated or create trying to gain insight on how long a lubricant in current use could last. Foams pose serious problems which cause defect on surface conditions so that degradation does not take place. With a coatings and prevent the efficient filling of containers, so the proper lubricant system design and appropriate additive purpose of the defoamant is to retard the formation of stable foam selection, it is possible to avoid or control degradation to a large on the surface of the oil in the sump, gearbox, or reservoir.In the extent and prolong the life of the lubricant[3].The stability foam present work Poly dimethyl siloxane(PDMS) and Poly methyl is governed by the interface rigidity, elasticity and viscosity and methacrylate (PMMA )were investigated as antifoam agents. The not by the oil surface tension. Viscous oils produce more stable efficiency of the antifoaming was determined according to ASTM-D-892 by three sequences that differ only in measuring foam.
[Show full text]