DOCSLIB.ORG

LUMBER PLYWOOD OSB (Oriented Strand Board)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
LUMBER PLYWOOD OSB (Oriented Strand Board) LUMBER PLYWOOD Mill Species Grade Size (in.) Length (ft.) Product Species Length & Width Thickness Grade Stamp Shorts (5, 6, 7)1 Canada (mm) US (ft.) Canada (mm) US (in.) Canada US (PS 1-09) Soda Creek SPF J-Grade, A-Grade, #2&Btr, Stud, Economy, Finger Joint Studs 2X3, 2x4 & 2x6 8, 9, 10 mill CSA O121 CC PTS (U/L) T-PLY Ultra T&G Subfloor DFP/Fir 1220 x 2440 4x8 15.5, 18.5, 25.5 19/32, 23/32, 31/32 SPF J-Grade, A-Grade, #2&Btr, Stud, Economy Custom Scant Face T&G CSP3 CSA O121 CD PTS (U/L) Shorts (5, 6, 7)* T-PLY and T-PLY Pro T&G Subfloor Armstrong 2X3, 2x4 & 2x6 1220 x 2440 4x8 15.5, 18.5, 25.5 19/32, 23/32, 31/32 Fir Larch #1&Btr, #2&Btr, Stud, Economy 8, 9 mill DFP/Fir Custom Scant & Full Face T&G STUD MILLS STUD T-PLY Ultra Square Edge DFP/Fir 1220 x 2440 4x8 12.5, 15.5 15/32, 19/32 CSA O121 CC PTS Hemlock A-Grade, #2&Btr, Stud, Economy With fastener grid SPF VG Clears, J-Grade, A-Grade, Premium, #2&Btr, #2 Kiln Wets, #3, Economy T-PLY Pro Select OES VG Clears, J-Grade, Select Structural, MSR 1800, MSR 2250, MSR 2400, #2&Btr, Edge sealed DFP/Fir 1220 x 2440 4x8 18.5 23/32 CSA O121 CC PTS Lavington D-fir Larch 2x3 to 2x12 6 to 20 One-side sanded & oiled #2 Kiln Wets, #3, Economy T-PLY and T-PLY Pro Sheathing & Select 9.5, 12.5, 15.5, CD DFP/Fir 1220 x 2440 4x8 3/8, 1/2, 5/8, 3/4, 1 CSA O121 Hemlock A-Grade, #2&Btr, #2 Kiln Wets, #3, Economy Square Edge 18.5, 25.5 CD PTS J-Grade, A-Grade, MSR 1650, MSR 1950, MSR 2100, Premium, #2&Btr, #2 Kiln T-PLY Pro Premium Select Sheathing DFP/Fir 1220 x 2440 4x8 9.5-25.5 11/32 - 31/32 CSA O121 CC PTS SPF Wets, #3, Economy ULAY Premium Underlayment 1220 x 2440 4x8 BCPTS4 Lakeview 2x3 to 2x10 6 to 20 DFP/Fir 7.8 actual 5/16 J-Grade, Select Structural, MSR 1800-1950, MSR 2400, #2&Btr, #2 Kiln Wets, #3, With fastener grid 1220 x 1220 4x4 PS1 Underlayments D-fir Economy T-PLY Pro Underlayment 1220 x 2440 4x8 7.8 act. DFP/Fir 5/16 CSA O121 CC PTS With fastener grid 1220 x 1220 4x4 Nom. thick = 9.5mm DIMENSION MILLS High Level SPF J-Grade, A-Grade, Premium, #2&Btr, #2 Kiln Wets, #3, Economy 2x3 to 2x10 6 to 20 Tolko PLV Industrials Fir/Larch/ 48”, 49” x 96”, 97” 1/2 to 1-3/4 - - LaSalle SYP NGS #3 & BTR HT stamped, #4, #3, #2 Prime, #1, #1 Prime 2x4, 2x6, 2x8 2 to 20 Tolko PLV-X Industrials Spruce 1x4, 2x4, 2x6, 2x8, 2x10, 3x4, 3Limited availability STP SYP Premium, Standard, 3-4 mix, #4, #3 & BTR, #3, #2, #1 8 to 20 3x6, 4x4, 4x6, 5/4 x 6, 4x5-1/2 4Natural B 1Available in #2 and Stud Grade OSB (Oriented Strand Board) LSL (Laminated Strand Lumber) Product Thickness (in.) Lengths (ft.) Widths Grading Standard Zinc Borate Product Application E-Rating Thickness (in.) Zinc Borate 3/8, 7/16, 15/32, 1/2, 19/32, 23/32, 6, 8, 9, 10, 12, 14, 1.35 E T-STRAND OSB Sheathing 4,’ 8’ PS2 Optional T-TEC LSL Beam, Header, Joist, Stud, Stair Stringer, Rim Board, Wall Frame 3-1/2, 1-3/4, 1-1/2, 1-1/4 Optional 7/8, 1-1/8 16, 24 1.55 E T-STRAND Pro OSB Str 1 6, 8, 9, 10, 12, 14, Concrete Edge Form, Box Springs, Upholstered Furniture, Packaging, 3/8, 15/32, 1/2, 19/32, 5/8, 23/32 4,’ 8’ PS2 Optional Tolko LSL Industrials 7/8 up to 1-3/4 Optional Sheathing 16, 24 Crating, Millwork, Doors & Windows, RV Slide-outs 4’ T-STRAND OSB T&G Subfloor 19/32, 23/32, 7/8, 1-1/8 8,, 10, 12 PS2 Optional Full & scant face available 4’ T-STRAND Pro OSB T&G Subfloor 19/32, 23/32, 7/8, 1-1/8 8, 10, 12 PS2 Optional Full & scant face available SPECIALTY US PS2-18 and CAN T-T EC OSB Premium Flooring 19/32, 23/32, 7/8, 1-1/8 8, 10, 12 4’ Optional CSA-O325 Certified Product Species: D-fir, Western larch, Engelmann Grades: NLGA paragraph T-STRAND Pro OSB Stair Tread 1 12, 14 11-1/2” PS2 Optional Sizes: 3”x3” - 12”x12” and larger Moisture Content: Green Timbers spruce, Lodgepole pine, Western 130/131, FOHC, Select Lengths: up to 20’ Surfacing: Rough T-STRAND OSB Utility Panels 1/4 8 4’ N/A Optional hemlock structural, Clear 24 4,’ 8’ T-STRAND Pro OSB RV Flooring 3/8, 15/32, 19/32, 23/32 PS2 Optional Core Sizes: 3.25” Diameter Packaging Round Cores: 149 and 500 piece packages Custom cuts Custom cuts Peeler Cores Species: D-fir and SPF Rounds: 102” - 103” Packaging 2x3: 255 piece packages 16, 24 T-STRAND Pro OSB SIP Facers 7/16 4,’ 8’ PS2, PR-N614 Optional Custom cuts T-STRAND Pro OSB Webstock 25/64, 29/64 Custom cuts 4,’ 8’ PS2 Optional 1x6 Fencing, 1x4 Dog Eared Fencing, Pallet Components, Furring Strips, Fruit Bins and Boxes, Grooved Dunnage, Certified Dunnage, Remanufacturing Lauzon Flooring, Custom Cut Plywood & OSB, Trimming and Ripping Capability Rim Board Plus, ANSI/ 9-1/2”, 11-7/8”, 14”, 16”, 18”, OSB RIM BOARD 1-1/8, 1-1/4 12, 24 APA PRR-410, PRR-401, N/A2 20”, 22”, 24” CCMC 13238-L All products are subject to availability 2020.12 2Zinc Borate treated Rim Board available in T-TEC LSL One mission across North America True and trusted products and service TOLKO OPERATIONS Tolko’s state-of-the-art lumber, plywood, OSBand LSL Tolko is a family-owned company differentiated by operations are located in the abundant forests of 10 Corporate quality wood products, customer commitment and Lumber Western Canada and extend into the Southern Yellow C ANADA Plywood Pine forests of the United States of America. unwavering integrity. We are a strong company with OSB/EWP BRITISH COLUMBIA ALBERTA SASKATCHEWAN a solid reputation and over 60 years of experience in Logistics excellence 11 the forest industry. 12 Tolko has a flexible and reliable logistical network to 16 15 provide high levels of service. We work closely with our Around the world, we are recognized for being 2 13 3 British Columbia Alberta Saskatchewan14 USAmills, reload facilities, trucking companies and shipping customer oriented and results focused. We pride ALABAMA MISSISSIPPIcarriers to ensure that our wood products are delivered ourselves on providing top customer service based USA 4 on time throughout North America and beyond. 5 LOUISIANA 6 on strong relationships and industry knowledge. We 1 7 8 9 Solutions that work deliver on our promises and continually search for We pride ourselves on being easy to do business with new opportunities to develop strong partnerships. PRODUCT OVERVIEW by searching for innovative solutions, identifying BritishBritish Columbia, Columbia, CA CA Saskatchewan, CA Tolko is based in Vernon, British Columbia and since 1. Vernon Corporate new opportunities, and investing in our customer 1. Vernon CORPORATE 13. Meadow Lake OSB/EWP 2. Soda Creek 10 Lumber Corporate relationships. its beginnings in 1956, Tolko has grown from a small 2. Soda Creek LUMBER Lumber 3. Lakeview Lumber sawmill to become a company with over 3,000 3. LakeviewC ANADLUMBER A Louisiana,Plywood USA Green building standards 4. 4. HeffleyHeffley Creek10 Creek PLYWOOD/VENEEPlywood/VeneerR Corporate OSB/EWP BRITISH COLUMBIA ALBERTA SASKATCHEWANLumber14. LaSalle Lumber LUMBER 5. 5. ArmstrongArmstrong LUMBERLumber & PLYWOOD/VENEER & Plywood/Veneer employees. We manufacture lumber, plywood, veneer, Plywood Company LLC We work to balance environmental, social and 6.C 6. EagleEagleANAD Rock Rock REFORESTATIONReforestationA CENTRE Centre A Hunt-Tolko Partnership 11 OSB/EWP economic performance through our policies, principles OSB, LSL, biomass power, co-products and a growing BRITISH COLUMBIA 7. 7. LavingtonLavingtonALBER TA LUMBER12 LumberSASKATCHEWAN 8. 8. WhiteWhite Valley Valley VENEERVeneer Mississippi, USA16 and actions. number of specialty wood products for world markets. 9. Lake Country11 REMANUFACTURING 15 9. Lake Country12 Remanufacturing 2 13 15. Southeastern Timber LUMBERTolko products earn the certified wood credit under 3 Products LLC 14 US16 A Alberta, CA An STP-Tolko PartnershipALABAMA Alberta, CA 15 these standards through our Sustainable Forest Sales and Marketing Contacts MISSISSIPPI 2 10. High Level Lumber13 3 10. High Level LUMBER 14 USA Management (SFM) certifications (CSA and SFI) that 4 11.11. HighHigh Prairie Prairie OSB/EWPOSB/EWP Alabama,USA USA LUMBER OSB 5 LOUISIANAALABAMA 6 12.12. AthabascaAthabasca OSB/EWPOSB/EWP 16.MISSISSIPPI Jasper Forest Products LLC LUMBERfully qualify under the LEED standard via the LEED 1 250-549-5300 250-549-5311 7 8 US A A Jasper-Tolko Partnership 4 Alternative Compliance Path process. In addition, our [email protected] [email protected] 5 9 Saskatchewan, CA LOUISIANA 6 13. Meadow Lake OSB/EWP panel products qualify for incremental LEED credits 1 7 8 9 Louisiana, USA under the low emitting materials requirements. PLYWOOD EWP British Columbia,14. LaSalle CA Lumber Company LLC SaskLumberatchewan, CA 250-545-4411 250-549-5311 A Hunt-Tolko Partnership [email protected] [email protected] 1. Vernon CORPORATE 13. Meadow Lake OSB/EWP British 2.C olumbia,Soda Creek Mississippi,CA LUMBER USA Saskatchewan, CA 3.
Load more

Recommended publications
  • Coco Lumber Sawdust
    MushroomPart II. Oyster Growers Mushrooms’ Handbook 1 Chapter 5. Substrate 91 Oyster Mushroom Cultivation Part II. Oyster Mushrooms Chapter 5 Substrate COCO LUMBER SAWDUST J. Christopher D. Custodio Bataan State College, the Philippines Oyster Mushrooms (Pleurotus spp.) are saprophytic as they obtain there nutrients by decomposing various agricultural by-products. This mushroom has been cultivated worldwide because of its taste and low maintenance technology. There are different substrates that have already been identified that can be utilized for the cultivation of oyster mushroom. The possible substrates include rice straw, coffee pulps, sawdust, and even paper. Most of these are types of low-value lignocellulosic wastes that are primarily derived from agricultural practices or the agro-industry. (J.A. Buswell et. al., 1996) The bioconversion of these wastes is one reason why the cultivation of edible mushrooms is an appropriate practice for a society that depends on its agriculture. In the early 1990s, ‘coco lumber’ was given a great attention in the province as a substitute for hardwood. Sawmills producing lumber from coconut trees bloomed in reaction to the increasing demand for this low cost constructional material. Though beginners in mushroom cultivation are usually persuaded not to use sawdust from softwoods, sawdust from coco lumber (Fig. 1) is another possible substrate for P. ostreatus and has shown great results. Growers living near a coco lumber sawmill can make use of this waste product in order to start their own cultivation of oyster mushroom species. Figure 1. Coco lumber sawdust Coco Lumber Sawdust as a Substrate of Oyster Mushroom Oyster mushroom is one example of edible mushrooms that can utilize lignocellulosic materials as a substrate.
    [Show full text]
  • Section 061053 - Miscellaneous Rough Carpentry
    SECTION 061053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Wood framing, blocking, and nailers 2. Wood battens, shims, and furring (for wall panel attachment). 3. Plywood sheathing for miscellaneous structures and replacement of deteriorated roof sheathing. B. Related Sections include the following: 1. Section 075216 "SBS Modified Bituminous Membrane Roofing" for adhesively applied 2-ply, SBS bituminous membrane roofing, with self-adhered base ply sheet. 2. Section 076200 "Sheet Metal Flashing and Trim" for installing sheet metal flashing and trim integral with roofing. 1.3 DEFINITIONS A. Dimension Lumber: Lumber of 2-inches nominal or greater but less than 5-inches nominal in least dimension. B. Lumber grading agencies, and the abbreviations used to reference them, include the following: 1. NLGA: National Lumber Grades Authority. 2. WCLIB: West Coast Lumber Inspection Bureau. 3. WWPA: Western Wood Products Association. 1.4 QUALITY ASSURANCE A. Testing Agency Qualifications: For testing agency providing classification marking for fire- retardant treated material, an inspection agency acceptable to authorities having jurisdiction that periodically performs inspections to verify that the material bearing the classification marking is representative of the material tested. PRSD – Thompson Elementary School Roof Replacement 061053 – MISCELLANEOUS ROUGH CARPENTRY July, 2012 Page 1 of 7 B. Forest Certification: For the following wood products, provide materials produced from wood obtained from forests certified by an FSC-accredited certification body to comply with FSC 1.2, "Principles and Criteria": 1.
    [Show full text]
  • Environmental Considerations of Treated Wood National Park Service – Pacific West Region
    Environmental Considerations of Treated Wood National Park Service – Pacific West Region Overview In support of the mission of the National Park Service, making wise decisions about using wood treatments will help protect the natural areas and biodiversity of our parks, and the health of our employees. Preservative-treated wood’s most important benefit is its resistance to water, fungal, and insect damage. Extending the life of wood products reduces the demands on forests for replacement lumber and reduces maintenance and replacement costs. Historic wooden structures that must be repaired with compatible materials or replaced with in-kind materials make durability even more important. Treated woods are nearly impervious to rot and insects, making them good for outdoor use. Wood treated with chromated copper arsenate (CCA) poses certain environmental and health risks, including the leaching of chemicals such as arsenic and chromium into the environment and workers’ risk of exposure to hazardous chemicals. Disposal of treated wood also proves to be an issue, particularly disposal by incineration. Due to these concerns, manufacturers of treated wood and the EPA reached an agreement to end the sale of CCA-treated wood for most lumber products, effective January 1, 2004. The following offers less-toxic alternatives to CCA, handling and use precautions, and other recommendations when considering using treated wood. Due to the toxicity and potential effects on health and the environment, the Presidio Trust implemented a policy on the use of pressure treated lumber. Standard operating procedure now prohibits the use of CCA, ACZA, CZC, ACC, and Pentachlorophenol. All dimensional lumber is now treated with ACQ as an alternative.
    [Show full text]
  • UFGS 06 10 00 Rough Carpentry
    ************************************************************************** USACE / NAVFAC / AFCEC / NASA UFGS-06 10 00 (August 2016) Change 2 - 11/18 ------------------------------------ Preparing Activity: NAVFAC Superseding UFGS-06 10 00 (February 2012) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in agreement with UMRL dated July 2021 ************************************************************************** SECTION TABLE OF CONTENTS DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES SECTION 06 10 00 ROUGH CARPENTRY 08/16, CHG 2: 11/18 PART 1 GENERAL 1.1 REFERENCES 1.2 SUBMITTALS 1.3 DELIVERY AND STORAGE 1.4 GRADING AND MARKING 1.4.1 Lumber 1.4.2 Structural Glued Laminated Timber 1.4.3 Plywood 1.4.4 Structural-Use and OSB Panels 1.4.5 Preservative-Treated Lumber and Plywood 1.4.6 Fire-Retardant Treated Lumber 1.4.7 Hardboard, Gypsum Board, and Fiberboard 1.4.8 Plastic Lumber 1.5 SIZES AND SURFACING 1.6 MOISTURE CONTENT 1.7 PRESERVATIVE TREATMENT 1.7.1 Existing Structures 1.7.2 New Construction 1.8 FIRE-RETARDANT TREATMENT 1.9 QUALITY ASSURANCE 1.9.1 Drawing Requirements 1.9.2 Data Required 1.9.3 Humidity Requirements 1.9.4 Plastic Lumber Performance 1.10 ENVIRONMENTAL REQUIREMENTS 1.11 CERTIFICATIONS 1.11.1 Certified Wood Grades 1.11.2 Certified Sustainably Harvested Wood 1.11.3 Indoor Air Quality Certifications 1.11.3.1 Adhesives and Sealants 1.11.3.2 Composite Wood, Wood Structural Panel and Agrifiber Products SECTION 06 10 00 Page 1 PART 2 PRODUCTS 2.1 MATERIALS 2.1.1 Virgin Lumber 2.1.2 Salvaged Lumber 2.1.3 Recovered Lumber
    [Show full text]
  • Wood from Midwestern Trees Purdue EXTENSION
    PURDUE EXTENSION FNR-270 Daniel L. Cassens Professor, Wood Products Eva Haviarova Assistant Professor, Wood Science Sally Weeks Dendrology Laboratory Manager Department of Forestry and Natural Resources Purdue University Indiana and the Midwestern land, but the remaining areas soon states are home to a diverse array reforested themselves with young of tree species. In total there are stands of trees, many of which have approximately 100 native tree been harvested and replaced by yet species and 150 shrub species. another generation of trees. This Indiana is a long state, and because continuous process testifies to the of that, species composition changes renewability of the wood resource significantly from north to south. and the ecosystem associated with it. A number of species such as bald Today, the wood manufacturing cypress (Taxodium distichum), cherry sector ranks first among all bark, and overcup oak (Quercus agricultural commodities in terms pagoda and Q. lyrata) respectively are of economic impact. Indiana forests native only to the Ohio Valley region provide jobs to nearly 50,000 and areas further south; whereas, individuals and add about $2.75 northern Indiana has several species billion dollars to the state’s economy. such as tamarack (Larix laricina), There are not as many lumber quaking aspen (Populus tremuloides), categories as there are species of and jack pine (Pinus banksiana) that trees. Once trees from the same are more commonly associated with genus, or taxon, such as ash, white the upper Great Lake states. oak, or red oak are processed into In urban environments, native lumber, there is no way to separate species provide shade and diversity the woods of individual species.
    [Show full text]
  • Lumber and Related Products; a Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond
    4-f,r ' DOCUMENT RESUME ED 031 558 VT 007 859 Lumber and Related Products; A Base Syllabus on Wood Technology. Eastern Kentucky Univ., Richmond. Pub Date Aug 68 Note-108p.; From NDEA Inst. on Wood Technology (Eastern Kentucky UM, June 10-Aug. 2, 1968). EDRS Price MF-$0.50 HC-$5.50 Descriptors-*Building Materials, Curriculum Development, *Curriculum Guides, *Industrial Arts, Instructional Improvement, Lumber Industry, *Resource Materials, Summer Institutes, Teacher Developed Materials, Teacher Education, *Woodworking Identifiers-*National Defense Education Act Title XI Institute, NDEA Title XI Institute Prepared by participants in the 1%8 National Defense Education Act Institute on Wood Technology, this syllabus is one of a seriesof basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and .content of their programs. The primary objective of this course outhne is to point out the importance and the many uses of wood and wood products. Topics covered are: (1 )Lumber Grades and Sizes,(2)Plywood,(3)Veneer,(4)Fiberboard,(5) Particleboard,(6)Sheetboard,(7)InsulationBoard,(8)StructuralSandwich Construction,(9)Shingles,(10)Pulp and Paper,(11) Wood Flour,and (12) Cellulose-DerivedProducts.Mostunitscontain 'informationonmanufacturing processes, properties,types and grades, and uses of the products. Selected bibliographies are listed for each unit. The final section provides instructional aids, suggested projects and student activities, and materials and equipment needed for specific prolects. The document is &strafed with drawings, charts, and photographs. Related documents are available as VT 007 857, VT 007 858, and VT 007 861: (AW) ft; LUMBER BAS YLLABUS ON WOOD CHNOLOGY .:'Pre,pare4 by INSTITUTE.
    [Show full text]
  • Architectural Woodwork Standards, 2Nd Edition
    Architectural Woodwork Standards WALL/CEILING SURFACING & PARTITIONS 8S E C T I O N SECTION 8 Wall/Ceiling Surfacing and Partitions table of contents INTRODUCTORY INFORMATION COMPLIANCE REQUIREMENTS Guide Specifications ...........................................................................194 GENERAL Introduction .........................................................................................195 Basic Considerations ....................................................................212 Wall and Ceiling Surfacing ..................................................................195 Grades .....................................................................................212 Opaque .........................................................................................195 Economy ...........................................................................212 Transparent ..................................................................................195 Custom ..............................................................................212 Contract Documents ...........................................................................195 Premium ............................................................................212 Product Advisory .................................................................................195 Grade Limitations ..............................................................212 Panel Sequence ..................................................................................196 Contract Documents
    [Show full text]
  • Chapter 5--Commercial Lumber
    Chapter 5 Commercial Lumber Kent A. McDonald and David E. Kretschmann n a broad sense, commercial lumber is any lumber Contents that is bought or sold in the normal channels of Hardwood Lumber 5–1 commerce. Commercial lumber may be found in a variety of forms, species, and types, and in various commer- Factory Lumber 5–2 cial establishments, both wholesale and retail. Most com- Dimension and Component Parts 5–2 mercial lumber is graded by standardized rules that make purchasing more or less uniform throughout the country. Finished Market Products 5–6 When sawn, a log yields lumber of varying quality. To Lumber Species 5–7 enable users to buy the quality that best suits their purposes, Softwood Lumber 5–7 lumber is graded into use categories, each having an appro- priate range in quality. Lumber Grades 5–7 Lumber Manufacture 5–10 Generally, the grade of a piece of lumber is based on the number, character, and location of features that may lower the Softwood Lumber Species 5–12 strength, durability, or utility value of the lumber. Among Softwood Lumber Grading 5–12 the more common visual features are knots, checks, pitch pockets, shake, and stain, some of which are a natural part of Purchase of Lumber 5–12 the tree. Some grades are free or practically free from these features. Other grades, which constitute the great bulk of Retail Yard Inventory 5–16 lumber, contain fairly numerous knots and other features. Important Purchase Considerations 5–17 With proper grading, lumber containing these features is entirely satisfactory for many uses.
    [Show full text]
  • Factors Determining Lumber Recovery in Sawmilling
    United States Department of Agriculture Factors Determining Forest Service Forest Products Lumber Recovery in Laboratory General Technical SawmiI ling Report FPL-39 Philip H. Steele Abstract Lumber volume recovery in sawmilling is determined by a confusing interaction of several factors. The more one knows about each individual factor, the more one can understand how the factors interact. The author identifies and discusses in detail seven factors influencing lumber recovery. Past and current research is cited, and examples are given to illustrate the points made. Keywords: Lumber recovery, sawmills, sawmilling. April 1984 Steele, Philip H. Factors determining lumber recovery in sawmilling. Gen. Tech. Rep. FPL-39. Madison, WI: U.S. Department of Agriculture, Forest Servrice, Forest Products Laboratory, 1984. 8 p. A limited number of free copies of this publication are available to the public from the Forest Products Laboratory, P.O. Box 5130, Madison, WI 63706. Laboratory publications are sent to over 1,000 libraries in the United States and elsewhere. The Laboratory is maintained in cooperation with the University of Wisconsin. Factors Determining Lumber Recovery in Sawmilling Philip H. Steele, Forest Products Technologist Forest Products Laboratory, Madison, Wis. Introduction The Factors Identified Lumber recovery in sawmilling is determined by a The following factors influence lumber recovery during the confusing interaction of several variables. Since no two sawmilling process and are examined in detail in this sawmills are alike, the variables that influence lumber report: recovery are seldom the same from one sawmill to (1) Log diameter, length, taper, and quality. another. This complexity confuses even those with a wide (2) Kerf width.
    [Show full text]
  • Basics of Pressure Treatment of Wood
    Oklahoma Cooperative Extension Service NREM-5047 Basics of Pressure Treatment of Wood Salim Hiziroglu Assistant Professor, Forestry Oklahoma Cooperative Extension Fact Sheets are also available on our website at: Wood is an excellent renewable building material. How- http://osufacts.okstate.edu ever, when a wood product is used in contact with the ground or exposed to high moisture conditions it may be subjected to biological and insecticidal deterioration. As a result of termite or fungi attack, wood from most species can be destroyed within five to eight years. To extend the service life of wood to 20-25 years in moist environmental conditions, it is important to use pressure treatment methods. The objective of this fact sheet is to summarize the most commonly used pressure treatment methods, the basic principles, and some of the chemicals used for such processes. Preparing Wood for Pressure Treatment The purpose of wood pressure treatment is to force preservative chemicals deep into the cellular structure of the wood. The chemical acts as a barrier between the wood and biological deterioration agents, so that the service life of Figure 2. Incised lumber to improve the penetration of the wood can be substantially increased. For most pressure the treatment chemical. treatment processes, moisture in wood is reduced before the application of the chemical. In the case of roundwood treat- Table 1. A comparison of retention values (lb/ft3) of incised ment, logs should be debarked using various equipment, such and non-incised eastern spruce treated by CCA and ACA as rosserhead or ring debarkers. Incising is another process using the full-cell method.
    [Show full text]
  • Murphy Paneling: How to Install
    Plywood Medium Density Fiberboard (MDF) Step by Step This instruction sheet describes the proper methods for installing Murphy decorative wall paneling. This paneling is If studs are over 16" on center, install horizontal butt panels tightly. A 3⁄16” space should be intended for dry interior use only and requires care in furring 16” on center following recommendations provided around windows and doors. handling. in section 8. If you’re paneling over a new wall, check your local building codes to see if you’re 5. Fitting Panels allowed to install paneling 1⁄4” and thicker There is nothing quite like the warmth and • PLYWOOD AND MDF directly to studs without a backing. Paneling beauty of Murphy wall paneling. Appropriate in Put the first panel in place and bring to adjacent thinner than 1⁄4” will require installation of a every setting and harmonious with either wall in the corner allowing 1⁄16” space. Make noncombustible backer over the studs. Exterior traditional or contemporary decor, prefinished sure it is plumb and both left and right panel walls must be insulated and have a 4 mil or paneling has an appeal no other wall covering edges fall on solid stud backing. The panel may greater vapor retarder installed on the living side can match. When you choose Murphy paneling, have to be trimmed to allow the outer edge to of the wall prior to panel installation. 1/8” you can be assured you’ve made a wise choice. fall on the center of a stud for nailing. Also, on Western Vista® and StyleLine® wall paneling Murphy prefinished paneling is suitable for rough walls, or adjoining a fireplace wall, use a should always be installed over a solid normal dry interior use environments.
    [Show full text]
  • Mechanical Properties of Laminated Veneer Lumber Beams Strengthened with Cfrp Sheets
    MECHANICAL PROPERTIES OF LAMINATED VENEER LUMBER BEAMS STRENGTHENED WITH CFRP SHEETS M. BAKALARZ1, P. G. KOSSAKOWSKI2 This paper presents the results of the static work analysis of laminated veneer lumber (LVL) beams strengthened with carbon fabric sheets (CFRP). Tested specimens were 45mm wide, 100 mm high, and 1700 mm long. Two types of strengthening arrangements were assumed as follows: 1. One layer of sheet bonded to the bottom face; 2. U-shape half-wrapped reinforcement; both sides wrapped to half of the height of the cross-section. The reinforcement ratios were 0.22% and 0.72%, respectively. In both cases, the FRP reinforcement was bonded along the entire span of the element by means of epoxy resin. The reinforcement of the elements resulted in an increase in the bending strength by 30% and 35%, respectively, as well as an increase in the global modulus of elasticity in bending greater than 20% for both configurations (in comparison to the reference elements). Keywords: carbon fibres, LVL, strengthening, timber structures, 1. INTRODUCTION The basic treatments aimed at rehabilitating or strengthening existing [3, 4] and new structural elements include the change of the static scheme, the addition of a cooperating structure, and the introduction of additional materials. Steel and composite materials are most often used as an additional material. With regard to wooden structures, composite materials are used both as: 1 MSc., Eng., Kielce University of Technology, Faculty of Civil Engineering and Architecture, Al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland, e-mail: [email protected] 2 DSc., PhD., Eng., Prof. KUT, Kielce University of Technology, Faculty of Civil Engineering and Architecture, Al.
    [Show full text]