Rain Gutter Wedges

Total Page：16

File Type：pdf, Size：1020Kb

Rain Gutter Wedges End Caps Right or Left 5" & 6" Gutter Wedges For 5" & 6" gutter Left to Right; 5" 45 degree, 5" 35 degree Variable & 20 degree Standard 5" 45 Degree For 10/12 to 12/12 pitch roof 20 Degree Standard 5" Gutter Wedge--For 3/12 to 4/12 pitch roof. Standard wedge available in White & brown only. 6" 35 Degree Variable For 4/12 to 8/12 pitch roof 5" 45 degree & Variable 5" & 6" wedges available in 14 colors Musket Brown & Grecian Green colored wedges. 35 Degree Variable 5" gutter wedge, For 4/12 to 8/12 pitch roof. Not show: 6" 20 degree Standard wedges also available for 3/12 to 4/12 pitch roof. Standard wedge available in White & Brown only. Click here for pricing Copper Wedges 5" variable only. Our Variable 5" & 6" gutter wedge comes with locator dots so you can trim the wedge to roof pitch. Available in 14 Colors as well as Copper Click Here to View Color Chart NEW The "T" Gutter WedgeTM Patent Pending No.5,740,733 Everything you need in a Gutter Wedge and more!!!! This new concept in gutter wedges sets it Two Sizes- 5" & 6" apart from any other wedge marketed Two Styles K Style & Fascia Style 5" T-Wedge Made of extruded Aluminum 1 1/8" wide and 3.6" tall. (Mill Finish) Works on angles ranging from 7 degrees to 45 degree. Works with 5" gutter. 6" T-Wedge (Jumbo) Mill finish or white Made of extruded Aluminum today. 1 3/8" wide and 4.7" tall. (mill finish) Works on angles ranging from 7 degrees to 45 degree. Works with 6" gutter. Half Round T-Wedge Made of extruded Aluminum 1 5/16" wide and 2 3/4" tall. Works on angles ranging from 7 degrees to 45 degree. Colors Almond & Musket (Dark) Brown From the drawings below you can see that it handles even the toughest Half round T-Wedge obstacle. Go to shopping cart. You no longer will have a problem installing gutter on Fascia that has drip molding on it!! This NEW "T" WedgeTM solves the problem and does it with ease, regardless of the fascia slope. More Gutter Products >> • Gutter Screws • End Caps • Gutter Cleaner • Hidden Hangers • Gutter Wedges [BACK TO HOME PAGE] Front Street Manufacturing Gutter Works P. O. Box 38 - Barnes City, Iowa 50027-0038 1-888-376-6871 Toll-Free Tech Questions E-mail: [email protected] Order E-mail: [email protected] NEW!! UNIVERSAL DOWNSPOUT TILE ADAPTERS THEY WILL FIT ANY SIZE PIPE AND ARE THE LOWEST PRICED!! CLICK HERE TO VIEW!! GutterWorks.com Catalog • Ordering Info • GutterWorks Home Page Gutter Products • Gutter Guards • Copper and Wood Gutters Gutter Problems & Solutions • Downspout Products Ladder Products • Seamless Gutter Machines .

Copy Link

Recommended publications

Rain Gutters
RAIN GUTTERS COMPLETE RANGE OF PLASTIC RAIN GUTTERS PLASTMO.DK ABOUT PLASTMO We are a Danish company that was founded in 1958. Today our headquarters and manufacturing facility is in Ringsted. We are the market leader in Denmark for solutions to handle rain water, such as rain gutters, drainage, gabions and lightweight roofing solutions. The company is part of the Plastmo Nordic division that operates in Denmark, Norway, Sweden, Finland and Poland with an annual turnover of approxi- mately DKK 250 million and 100 employees. Plastmo A/S is owned by the international ACO group, which has an annual turnover of DKK 5,3 billion, and is the world leader in line drainage. 2 Scandinavian design and quality QUALITY TIGHT JOINS AND SIMPLE Plastmo has produced rain gutters for the Nordic ASSEMBLY WITH GLUE climate for more than 50 years. The result is a All parts in our rain gutter system are bonded to- complete range of durable and simple solutions gether to get unobtrusive and tight joins. After five that provide you with some unique benefits. decades spent with home owners in the Nordic Regardless of whether you are building new con- countries, the glue has demonstrated its strength, struction or renovating. and is still holding up. You can use glue for all ma- terials. At the same time it is simple and quick to install the rain gutters and it provides you with extra security that you will achieve a good result. 3 PLASTMO PLASTIC RAIN GUTTERS Plastmo Plastic Rain Gutters have proven their strength for more than half a century.
[Show full text]
Gutter System Installation Standards Product Specification
Gutter System Installation Standards Product Specification Property of: Spectra Metal Sales Gutters and Leaf Protection Introduction A Rain Gutter System starts with a trough, called a gutter, which collects rainwater from the roofline of a house and diverts it away from the structure, using elbows and downspouts. • The purpose of this diversion is to prevent water flow off the roof edge which can cause structural damage over time to the walls and/or foundation of a house. • The gutter system is more important to the exterior of your home than the actual paint, siding, or even windows, because it protects your home from rot, mold, mildew, and flooding. • This water damage, without a gutter system, occurs slowly, spreads quickly, and is unnoticeable until the damage repair is substantial. • For your gutter system to work properly, it must be able to empty out the water faster than it fills up. In order to ensure the proper flow of water, a few are vital to the success of the overall gutter system: 1) Seamless gutters 2) Gutter and downspout sizing 3) Slope or pitch of gutter 4) Downspout placement 5) Keeping the gutters debris free 6) Using quality parts and accessories 2 Gutter Specifications Scope of Guide A) The Rain-carrying system consists of all necessary components to complete installation with products manufactured or endorsed for use by Spectra Metal Sales. System Components A) Gutters shall be made of 3105-H24 aluminum and shall be continuous and seamless with a minimum thickness gauge of .032” or .027” (+/- .002” nominal). B) All pre-painted components will have an approved SMS Finish and Color.
[Show full text]
The Classic Rain-Gutter Loop Antenna – Is It Any Good?
The Classic Rain-Gutter Loop Antenna – Is it any Good? A simple technical look at an HF horizontal loop of wire strung around your house at rain-gutter height, plus. some novel loop disguise techniques. By John Portune W6NBC Compromise disguise antennas are no strangers to hams, especially on HF. But which ones are worth the effort? We often just put them up and hope for the best. But when I moved to a CC&R restrictive mobile home park recently, I wanted better answers, particularly for the classic rain-gutter loop, Figure 1. I couldn’t put up more of an HF antenna without the neighbors noticing. But was it any good, or only little more than a dummy load? Figure 1: Classic rain-gutter-height loop, elevated on standoffs (stylized for emphasis) To find out, I challenged the rain-gutter loop with EZNEC antenna modeling software. This required best-case and worst-caswe models to encompass most house variables: (1) two loop heights, (2) two house types and (3) several bands. These would place most houses somewhere within these limits. Loop heights were: 10 ft. (rain-gutter height) and 25 ft. (a more conventional loop height). House types were: all wood (best case) and stucco/chicken wire (worst case). Bands were: 40M, 20M and 10M. Why didn’t I include 80M and 160M? Well, I did at first, but right up front, EZNEC revealed something very important about horizontal loops – Rule of Thumb 1. RULE OF THUMB 1 To be efficient, a closed loop must have a perimeter greater than one wavelength (1λ) on the lowest band in use.
[Show full text]
Design Guidelines September, 1999 Table of Contents
Design Guidelines September, 1999 Table of Contents I: Introduction ............................................................................................................................................................................................. 1 A. Preserving the Architectural Heritage............................................................................................................................................. 1 B. History of the Historic District Area............................................................................................................................................... 1 C. Other Areas of Historical Significance........................................................................................................................................... 2 D. Historic Preservation Commission................................................................................................................................................. 3 E. Purpose............................................................................................................................................................................................ 3 F. Scope and Jurisdiction .................................................................................................................................................................... 4 G. Certificate of Appropriateness .......................................................................................................................................................
[Show full text]
Rain Gutters Are Attached to Your Home and Run Along the Roof Line
Rain gutters are attached to your home and run along the roof line. They collect the rain water that falls on the roof, and lead it into downspouts, which carry it away from the house or to rainwater collection barrels. Rain gutters help protect the foundation from wearing down and the roof and siding from water leaks that can cause the buildup of mold and mildew. They also help keep moisture out of the crawl space under the house. However, rain gutters also collect plant debris, such as pine needles and leaves, putting your home at risk from burning embers. If debris in the gutters catches fire, the house and everything inside is in danger. Cleaning rain gutters often removes debris buildup, keeps rainwater Rain flowing into the downspout and away from the house, improving the gutters are safety of your home. Plastic gutters are easy to install, but can melt traps for and ignite your home. Metal gutters however, won’t burn or crack, burning making them the best choice in fire hazard areas. embers, which can ignite your You can also increase your home’s safety by putting in gutter home long flashing, which will protect the roof’s edge and help stop fire from before the spreading to the attic. Gutter flashing is a thin layer of waterproof actual wildfire material that’s bent at a right angle and attached under the roof arrives. covering, inside the gutter. Rain gutter covers or guards can be added to block debris and reduce the number of times you need to clean them, but they must be kept up regularly to lower the wildfire risk.
[Show full text]
Superior Gutter Guard Installation Procedure Overview to Get the Best
Superior Gutter Guard Installation Procedure Overview To get the best performance from your Superior Gutter Guards, there are several factors and installation techniques to consider before installing. These Procedures will cover all that is required to get the best performance from your Superior Gutter Guards. The better the DIY installer does in getting the installation factors correct, the better the performance your Superior gutter guards will be. Safety When installing Superior, always make Safety your top priority, use your ladder, tools and equipment correctly. Tools 1. Rechargeable Drill (1/2’ Self Tapping Hex Screws and Magnetic Nut Setter). Metal cutting snips (Tinner & Aviation types 2. Silicone Caulking, Clear, 100% (GE brand, 4 oz tube) 3. Ladders with a Ladder Stabilizer (highly recommended) 4. Clean work area Worktable or Bench. Optional Tools: 2” putty knives, work gloves, 2” paint brushes and a gutter scoop. Preparing Gutters Begin by cleaning out all debris from your gutters including your downspouts. Make any required repairs to your gutters including making sure to seal all gutter seams. Products like Geocell 2320 or Seamer Mate 85148 are recommended for sealing gutters. We recommend using a cleaner like Windex or 409 to clean the outsides of your gutters. Make sure that your gutters are completely dry before applying any sealant. Installation Under the Shingle Under the Shingle is where the rear Rail of the gutter guard slides under the roof shingle and on top of the moisture barrier (or tar paper). The rear rail guard is supported by the roof deck, the front rail guard is attached to the front lip of the gutter, use the Magnetic Nut Setter to fasten the Self-tapping Hex screw to fasten the guard.
[Show full text]
Preventing Ice Dams
{Property} Preventing Ice Dams waterWhat CAU Recommends: Introduction > Clean rain gutters annually to Ice dams represent a costly (and potentially remove obstructions that can dangerous) hazard for property owners and block the flow of water from community associations. Even worse, once a the roof building has shown itself to be susceptible to ice > Inspect attic insulation and dams, it is more likely to keep developing them ventilation during future cold weather. > Install ice shields or other waterproof membranes The majority of ice dams form as a ridge of ice beneath the roof covering along a rain gutter and roof eave. As ice builds during roof replacement up, it creates an unintended dam that prevents projects melting snow from draining off of the roof. Some > Locate a contractor that can can be very easy to see, but others form around clear ice dams from your skylights, chimneys, and other features that make buildings them harder to detect from the ground. Need More Information? Whether they are visible or not, ice dams can Additional information relating cause significant damage to a building or unit. to ice dam prevention is That’s because water that pools up behind it can available from The Institute find its way under the roof and into the structure for Business and Home Safety and the interior of a home. It isn’t unusual for (www.disastersafety.org) or by ice dams to cause damage to insulation, wall contacting CAU’s Loss Control interiors, ceiling finishes, and trim. Exterior Department. damage to roofs, gutters, and spaces below an ice dam (like windows and landscaping) is also common.
[Show full text]
Gutta® Terrace Roof Building Kit
gutta ® Terrace roof building kit NEW ! • available with 4 m roof depth • Expansion module gutta® Terrace roof building kit Their advantages ü Complete kit with assembly material ü Simple and adaptable installation ü Aluminium profiles powder coated white or anthracite ü Rain gutter with water drain integrated on both sides ü highly resistant polycarbonate twin-wall sheets ü UV resistant und hail proof ü Snow load: Model with 3 m roof depth: 150 kg/m² Model with 4 m roof depth: 100 kg/m² ü 10 Year guarantee Cross-beams and posts adjustable up to 60 cm 60 cm Also suitable as a carport 60 cm white anthracite www.gutta.com Simple and adaptable installation 10 mm strong polycarbonate Twin-wall sheets are clicked into the rafters. Rafter: (middle/edge) width: 5 cm hight: 7/8 cm 7/8 cm wallsupport: hight: 10 cm 5 cm depth 5,5 cm Model with 3 m roof depth: Adaptable installation through variable ridge height and adjustable support posts. 13° 17° Posts: width: 8 cm deep: 4 cm 300 cm 300 cm - - hight: 220 cm 280 280 Cross-beams and posts adjustable up to 60 cm 220 cm 220 cm The passage height at the eaves changes depending on max. 285 cm mind. 225 cm roof pitch. Model with 4 m roof depth: 13° 17° 350 cm 350 cm - - 310 310 220 cm 220 cm max. 385 cm mind. 325 cm highly resistant Tecnical Data polycarbonate twin-wall sheets Sheet width 600 mm Sheet length 3000 / 4000 mm Sheet thickness 10 mm Weight 2,0 kg/m² Profile structure 5 Walls Light transmission 62 % (±5%) Clear (structured) Heat transmission K value 2,3 W/m² K Coefficient of linear extension 0,065 mm/m °C Cold flexural radius 2000 mm/min.
[Show full text]
Catalog by Rutland (HR)
NEW 2010 RutlandCatalog5_2009.qxd:RutlandCatalog2002.qxd 5/26/09 2:19 PM Page 1 RutlandCatalog5_2009.qxd:RutlandCatalog2002.qxd 5/26/09 2:19 PM Page 2 ROOFING RUTLAND GUTTER SUPPLY is family owned and operated. Our manufacturing facility is based in Orlando Florida. We have over 40 years experience in the construction and sheet metal fabrication business. We own and operate some of the most modern CNC machinery available, from computerized roll forming machines to our latest acquisition a 4” round seamless pipe machine, which produces fully, welded seamless pipe. Fully automated, this machine is the only one of its kind in the USA. Our products can be fabricated in Mill Finish Aluminum, Zinc, Lead Coated Copper, Stainless Steel, Copper, Galvanized and Galvalume. We stock the largest selection of custom gutter components from hangers to pipe and leader heads. Our latest line of products are custom hand made 48oz fully welded kitchen hoods with hand finished designs from the unique Billiard light with the great wall of China meandering around all sides, to the Rocky Mountains scene with horses and log cabin. We are able to hand craft any view or scene of your choice on to the hoods, as these are custom pieces.They are 8 to 10 weeks lead time, all other products are from stock. Installed Copper Chimney Caps - CC001 Standing seam panels Handmade copper tiles Patina standing copper seam roofs with 6” half round copper gutter Standing seam tower 2 © RUTLAND RutlandCatalog5_2009.qxd:RutlandCatalog2002.qxd 5/26/09 2:19 PM Page 3 ROOFING Step 1 Step 2 The construction of a dome roof as shown in three stages.
[Show full text]
Cat Tec Gronde Ing 1-18
PVC RAIN GUTTERS Technical Catalogue Technical INDEX Pag. THE COMPANY 5 QUALITY 6 CONFORMITY WITH “EN 607:2005” STANDARDS 7 QUALITY REQUIREMENTS 8 CHARACTERISTICS OF RAW MATERIALS - PVC CHEMICAL RESISTANCE 9/10 GUTTER PROFILE SECTIONS 11 GUTTER SYSTEM COMPONENTS 12/14 GUTTER SYSTEM APPLICATION EXAMPLES 15 HYDRAULIC CALCULATIONS 16 RECOMMENDED USE OF ACCESSORIES 17 ASSEMBLY WITH GLUE 18 ASSEMBLY WITH GASKET 19 INSTALLATION INSTRUCTIONS 20/21 ASSEMBLING GUTTER 22 GUTTER CHANNEL Mod. 116 23 GUTTER CHANNEL Mod. 100 24 GUTTER CHANNEL Mod. 125 25 GUTTER CHANNEL Mod. 133 26 GUTTER CHANNEL Mod. 145 27 SQUARE GUTTER CHANNEL Mod. 100x110 28 GUTTER CHANNEL Mod. 29 GUTTER CHANNEL Mod. 30 GUTTER CHANNEL Mod. 125 31 GUTTER CHANNEL Mod. 133 32 DOUBLE-WALL GUTTER CHANNEL Mod. G86 ® 33 DOUBLE-WALL GUTTER CHANNEL Mod. G2 ® 34 GALVANISED METAL BRACKETS FOR GUTTERS 35 PVC DOWNPIPES 36 PVC FITTINGS AND ACCESSORIES 37 RAIN COLLECTOR 38/39 SIDE HOPPER HEAD 39 DOWNPIPES AND FITTINGS 40 ACCESSORIES 41/42 ® 4 THE COMPANY First Plast, founded in 1966 is a company which specializes in the production of articles of plastic material for the building industry, and more precisely in rain gutter systems, PVC fittings and ground accessories. PLANNING First Plast has achieved world-wide recognition, for its continuous development, of new and inovative products. QUALITY First Plast has obtained since 1995 Quality System Certificate ISO 9002 and it supplies the customer with all the technical support in dealing with consumer’s demands. In order to supply the customers with products in conformity with the obtained national and international certifications, in First Plast’s laboratories there is a continuous control of productive quality utilizing the most sophisticated equipement.
[Show full text]
Ice Dams on Roof
ICE DAMS ON ROOF Snow blanket Melted snow (water) Ice dam Stained and Wet (ineffective) insulation Overloaded cracked plaster rain gutter Void due to sagging Icicle insulation; damp rotting walls Frozen sidewall Wet (ineffective) ice formations insulation Stained, blistered, Stained, blistered, and and peeling siding peeling wall paint Ice dams form when heat enters an attic and melts snow on the roof. The melted snow (water) runs down the roof, under the blanket of snow, to the edge of the roof where colder conditions cause it to freeze, forming ice dams. If ice dams are not removed, water may be caught behind them, forced under shingles or spill over to form icicles. This can result in costly damage to your Each year, ice dams cause millions home: wet (ineffective) insulation; stained or cracked plaster or sheetrock; damp, rotting walls; of dollars in damage to homes. and stained, blistered or peeling paint. However, if you take the right steps, you can minimize or avoid this problem. Preventing ice dams Since the basic cause of ice dams are air leaks creating warm spots on the roof, the solution is usually to maintain a cold roof. You can take three steps to achieve a cold roof: seal bypasses, insulate and ventilate. Seal bypasses Any hole, crack or crevice that allows heated air to leak through and past insulation is known as a bypass. If bypasses are not sealed before insulating, the insulation only “filters” the warm air on its way to the attic and your roof will still have warm spots. Bypasses are found: • Around light switches, outlets and light fixtures • Around chimneys and plumbing stack pipes • At the rim joist and foundation • Around bathroom and kitchen ceiling vents and any other warm exhaust equipment • Through dropped soffits (ceilings) NOTE: Recessed lights also are bypasses but, because of possible heat buildup, they should not be covered with insulation.
[Show full text]
Rheinzink Rain Gutter Brochure
GUTTER SYSTEMS System Technology for Rainwater Goods DESIGN AND APPLICATION GUTTER SYSTEMS, DESIGN AND APPLICATION RHEINZINK Leaf Guard Fig. 33: Private Residence - USA RHEINZINK Snap-Lock Bracket RHEINZINK Gutter Systems 1. RHEINZINK gutters are available in 6. Water diversion and collection parts 13. Refer to the RHEINZINK baseline the PATINA PRODUCT LINE only. available. details for design options. Consult the RHEINZINK technical department for 7. ProRoofi ng recommended on all gutter customized applications as well as sol- fl ashings. dering and complete installation instruc- tions. 8. Available thicknesses: 2. RHEINZINK Gutter Systems may be 0.8 mm 14. RHEINZINK Gutter Systems can adapt used with asphalt shingle roofi ng appli- 0.7 mm to new or retrofi t construction. cations as well as many other roofi ng materials (Please refer to Chapter 9. Available Gutter lengths: 1 - “Infl uences from other Building 10’ Materials” for the complete list of com- 20’ patible roofi ng products) 10. Available Gutter Sizes: 3. Easy to install 5” (0.7 mm) 6” (0.7 mm) 4. Water diversion and collection parts 7-1/2” (0.8 mm) available. 11. Precision-fi tted pieces 5. Economical and Environmentally Friendly 12. Requires little or no maintenance Photo on page prior: Fig. 32 VOLUME 5 GUTTER SYSTEMS Gutter Components: A. A. RHEINZINK Flashing B. B. Leaf Guard O. C. Expansion Joint C. D. Endcap (L&R) P. E. Snap-Lock Bracket Rail D. F. Gutter Bracket Q. G. Snap-Lock Bracket E. R. H. Elbow F. I. Downspout Adapter J. Hidden Downspout Hanger G. S. K. Solid Zinc Downspout Bracket H.
[Show full text]