DOCSLIB.ORG

Thermocouple Thermometer HH911T HH912T Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Thermocouple Thermometer HH911T HH912T Manual User’s Guide Shop online at omega.com SM e-mail: [email protected] For latest product manuals: www.omegamanual.info HH911T, HH912T Thermocouple Thermometer Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.comSM TEMPERATURE MU Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies MU Wire: Thermocouple, RTD & Thermistor MU Calibrators & Ice Point References MU Recorders, Controllers & Process Monitors MU Infrared Pyrometers PRESSURE, STRAIN AND FORCE MU Transducers & Strain Gages MU Load Cells & Pressure Gages MU Displacement Transducers MU Instrumentation & Accessories FLOW/LEVEL MU Rotameters, Gas Mass Flowmeters & Flow Computers MU Air Velocity Indicators MU Turbine/Paddlewheel Systems MU Totalizers & Batch Controllers pH/CONDUCTIVITY MU pH Electrodes, Testers & Accessories MU Benchtop/Laboratory Meters MU Controllers, Calibrators, Simulators & Pumps MU Industrial pH & Conductivity Equipment DATA ACQUISITION MU Communications-Based Acquisition Systems MU Data Logging Systems MU Wireless Sensors, Transmitters, & Receivers MU Signal Conditioners MU Data Acquisition Software HEATERS MU Heating Cable MU Cartridge & Strip Heaters MU Immersion & Band Heaters MU Flexible Heaters MU Laboratory Heaters ENVIRONMENTAL MONITORING AND CONTROL MU Metering & Control Instrumentation MU Refractometers MU Pumps & Tubing MU Air, Soil & Water Monitors MU Industrial Water & Wastewater Treatment MU pH, Conductivity & Dissolved Oxygen Instruments M0000/0016 Table of Contents TABLE OF CONTENTS 1 Instrument Description ......................................................................................... 1-1 1.1 Specifications ................................................................................................ 1-1 1.2 Optional Accessories and Ordering Information .................................... 1-2 1.3 Omega Family of Thermometers ............................................................... 1-2 2 Preparation for Use .............................................................................................. 2-1 2.1 General Information ..................................................................................... 2-1 2.2 Feature Overview ......................................................................................... 2-1 2.3 Safety Notices and Information ................................................................. 2-2 2.4 Unpacking and Inspection ......................................................................... 2-4 2.5 Battery Installation and Replacement ...................................................... 2-4 2.6 Making Your First Temperature Measurement ......................................... 2-5 3 Operating Instructions ......................................................................................... 3-1 3.1 Keypad Functions ......................................................................................... 3-1 3.2 LCD Display .................................................................................................... 3-1 3.3 Setup Menu ................................................................................................... 3-3 3.4 View Modes and Statistics .......................................................................... 3-4 3.5 Auto-Power Off ............................................................................................. 3-6 3.6 Backlight and Backlight Timeout ............................................................... 3-6 3.7 Hold Function ................................................................................................ 3-6 3.8 Trend Indicators ............................................................................................. 3-6 3.9 Battery Indicator ........................................................................................... 3-7 3.10 Probe Offset ................................................................................................... 3-7 3.11 Clear Function ............................................................................................... 3-9 3.12 Invalid Measurement Indications ............................................................... 3-9 4 Service Information .............................................................................................. 4-1 4.1 Inspection and Cleaning ............................................................................ 4-1 4.2 Calibration ..................................................................................................... 4-1 4.2.1 Verification Procedure ............................................................................. 4-1 4.2.2 Alignment Procedure ............................................................................... 4-4 4.3 Troubleshooting ............................................................................................. 4-8 4.4 Diagnostic Routines and Error Codes........................................................ 4-9 A. Expanded Instrument Uncertainties ...................................................................A-i B. Instrument Verification Data Sheet .................................................................... B-i iii Instrument Description 1 INSTRUMENT DESCRIPTION 1.1 Specifications GENERAL SPECIFICATIONS: Basic Accuracy ±(0.04% |rdg| + 0.3 °C)1 Conformity ITS-90 Temperature Ranges °C °F K K -200 to 1372 -328 to 2502 73 to 1645 J -210 to 1200 -346 to 2192 63 to 1473 T -250 to 400 -418 to 752 23 to 673 E -250 to 1000 -418 to 1832 23 to 1273 Connector Type One (1) Mini-TC (HH911T) Two (2) Mini-TC (HH912T) Probe Zero Function Resolution 0.1 °C/°F/K Four (4) digit LCD, with Temperature, Units, Function, Trend, Display Polarity, Battery, and Decimal Indicators Display Backlight Four (4) LED Backlight with 30 second timeout Display Resolution 0.1 (-99.9 to 999.9 °) 1 ° (< -99.9 °, > 999.9 °) Reading Rate 3 / Second for Readings and Trend Indicators Battery Type 3 AA (IEC LR6, ANSI 15) Alkaline Battery Life 2000 Hours Typical Battery Indicator Four (4) Stage Battery Charge Indicator Minimum Reading Reading Range Statistics Maximum Reading Standard Deviation Average Reading T1–T2 (HH912T only) Keypad Eight (8) momentary switches with audible and tactile feedback Clock Elapsed Statistics Run Time Instrument retains last selected: Power Cycle - Sensor Type Configuration Retention - Temperature Units - Offset Values Input Current ±50 nA Maximum Common 42 V peak to earth 1 V p-p between T1 and T2 Mode Voltage Compliance RoHS2 ESD IEC 61000-4 2:2009, Class B EN 55022:2010+A1:2015, Class A; EN 61000-4 EMC MIL-PRF-28800F, Class 2 3:2006+A2:2010, 10 V/m (80 MHz to 1 GHz) 1‐1 Instrument Description ENVIRONMENT: Standards MIL-PRF-28800F, Class 2 UL 60079-0 § 26.4.2 Operating Temp -20 to 55 °C -4 to 131 °F For specification variances due to ambient operating temperature, Temperature see the Expanded Instrument Uncertainty charts in Appendix A of Coefficient this manual. For ambient operating temperatures not shown in Appendix A, accuracies shall be interpolated linearly. <10 °C (50 °F): Non-condensing 10 to 30 °C (50 to 86 °F): 5 to 95% RH Humidity 30 to 40 °C (86 to 104 °F): 5 to 85% RH 40 to 55 °C (104 to 131 °F): 5 to 60% RH Altitude 0 to 4600 m 0 to 15,092 ft Vibration Random 10 – 500 Hz, 0.03 g2/Hz Shock 30g Half Sine Drop 4 Drops from 1 m to Concrete Storage Temp -51 to 71 °C -59 to 159 °F PHYSICAL CHARACTERISTICS: Dimensions 193 x 84 x 28 mm 7.6 x 3.3 x 1.1 in Weight 362.9 g 12.8 oz 1 For complete instrument accuracies, see the Expanded Instrument Uncertainty charts in Appendix A of this manual. 1.2 Optional Accessories and Ordering Information PRODUCT MODEL DESCRIPTION Thermocouple Visit omega.com for available thermocouple probes Probes Printed Manual HH911T-900 Operation Manual 1.3 Omega Family of Thermometers Thermocouple HH911T Thermocouple Thermometer, Single Input Thermometers HH912T Thermocouple Thermometer, Double Input Data HH931T Data Thermometer, Single Input Thermometers HH932T Data Thermometer, Dual Input 1‐2 Preparation for Use 2 PREPARATION FOR USE 2.1 General Information The Omega HH911T and HH912T Thermocouple Thermometers are high- accuracy handheld digital thermometers that provide accurate temperature readings in a wide range of manufacturing and service applications. These full-featured, durable, and versatile instruments simplify the process of temperature measurement through the intuitive user-interface. They are compatible with the four most popular thermocouple types, K, J, T, and E. 2.2 Feature Overview Keypad with audible and tactile feedback; 2000 hour battery life1; Four (4) digit dual LCD with LED Backlight; Four (4) thermocouple types: J, K, T, and E; Comprehensive real-time statistics: MIN, MAX, AVG, RNG, STDEV, and T1-T22; Easy to clean; Probe offset function to minimize probe error; 0.1° or 1 ° display resolution; °F, °C, and K temperature units; Reading HOLD mode; Conforms to ITS-90 thermocouple tables; Durable: Meets MIL-PRF-28800F, Class 2 requirements; Optional tilt stand/hanger; User-friendly operation; Retains measurement parameters, even when turned off; Self-diagnostic routine to identify fault conditions; Low battery and open sensor indications; 1 Typical battery life under normal use conditions in laboratory environment. Continuous or repeated use of features such as the backlight, or use or storage at high or low temperature extremes may reduce battery life. 2 T1-T2 is available on model HH912T only. 2‐1 Preparation
Load more

Recommended publications
  • Seebeck and Peltier Effects V
    Seebeck and Peltier Effects Introduction Thermal energy is usually a byproduct of other forms of energy such as chemical energy, mechanical energy, and electrical energy. The process in which electrical energy is transformed into thermal energy is called Joule heating. This is what causes wires to heat up when current runs through them, and is the basis for electric stoves, toasters, etc. Electron diffusion e e T2 e e e e e e T2<T1 e e e e e e e e cold hot I - + V Figure 1: Electrons diffuse from the hot to cold side of the metal (Thompson EMF) or semiconductor leaving holes on the cold side. I. Seebeck Effect (1821) When two ends of a conductor are held at different temperatures electrons at the hot junction at higher thermal velocities diffuse to the cold junction. Seebeck discovered that making one end of a metal bar hotter or colder than the other produced an EMF between the two ends. He experimented with junctions (simple mechanical connections) made between different conducting materials. He found that if he created a temperature difference between two electrically connected junctions (e.g., heating one of the junctions and cooling the other) the wire connecting the two junctions would cause a compass needle to deflect. He thought that he had discovered a way to transform thermal energy into a magnetic field. Later it was shown that a the electron diffusion current produced the magnetic field in the circuit a changing emf V ( Lenz’s Law). The magnitude of the emf V produced between the two junctions depends on the material and on the temperature ΔT12 through the linear relationship defining the Seebeck coefficient S for the material.
    [Show full text]
  • Practical Temperature Measurements
    Reference Temperatures We cannot build a temperature divider as we can a Metal A voltage divider, nor can we add temperatures as we + would add lengths to measure distance. We must rely eAB upon temperatures established by physical phenomena – which are easily observed and consistent in nature. The Metal B International Practical Temperature Scale (IPTS) is based on such phenomena. Revised in 1968, it eAB = SEEBECK VOLTAGE establishes eleven reference temperatures. Figure 3 eAB = Seebeck Voltage Since we have only these fixed temperatures to use All dissimilar metalFigures exhibit t3his effect. The most as a reference, we must use instruments to interpolate common combinations of two metals are listed in between them. But accurately interpolating between Appendix B of this application note, along with their these temperatures can require some fairly exotic important characteristics. For small changes in transducers, many of which are too complicated or temperature the Seebeck voltage is linearly proportional expensive to use in a practical situation. We shall limit to temperature: our discussion to the four most common temperature transducers: thermocouples, resistance-temperature ∆eAB = α∆T detector’s (RTD’s), thermistors, and integrated Where α, the Seebeck coefficient, is the constant of circuit sensors. proportionality. Measuring Thermocouple Voltage - We can’t measure the Seebeck voltage directly because we must IPTS-68 REFERENCE TEMPERATURES first connect a voltmeter to the thermocouple, and the 0 EQUILIBRIUM POINT K C voltmeter leads themselves create a new Triple Point of Hydrogen 13.81 -259.34 thermoelectric circuit. Liquid/Vapor Phase of Hydrogen 17.042 -256.108 at 25/76 Std.
    [Show full text]
  • Type T Thermocouple Copper-Constantan Temperature Vs Millivolt Table Degree C
    Technical Information Data Bulletin Type T Thermocouple Copper­Constantan T Extension Grade Temperature vs Millivolt Table Thermocouple Grade E + Copper Reference Junction 32°F + Copper M Temperature Range Maximum Thermocouple Grade Maximum Useful Temperature Range: Temperature Range P Thermocouple Grade: ­328 to 662°F –454 to 752°F ­ Consrantan ­200 to 350°C –270 to 400°C ­ Consrantan E Extension Grade: ­76 to 212°F Accuracy: Standard: 1.0°C or 0.75% ­60 to 100°C Special: 0.5°C or 0.4% R Recommended Applications: A Mild Oxidizing,Reducing Vacuum or Inert Environments. Good Where Moisture Is Present. Low Temperature Applications. T Temp0­1­2­3­4­5­6­7­8­9 U ­450 ­6.2544 ­6.2553 ­6.2562 ­6.2569 ­6.2575 ­440 ­6.2399 ­6.2417 ­6.2434 ­6.2451 ­6.2467 ­6.2482 ­6.2496 ­6.2509 ­6.2522 ­6.2533 R ­430 ­6.2174 ­6.2199 ­6.2225 ­6.2249 ­6.2273 ­6.2296 ­6.2318 ­6.2339 ­6.2360 ­6.2380 ­420 ­6.1873 ­6.1907 ­6.1939 ­6.1971 ­6.2002 ­6.2033 ­6.2062 ­6.2091 ­6.2119 ­6.2147 E ­410 ­6.1498 ­6.1539 ­6.1579 ­6.1619 ­6.1657 ­6.1695 ­6.1732 ­6.1769 ­6.1804 ­6.1839 ­400 ­6.1050 ­6.1098 ­6.1145 ­6.1192 ­6.1238 ­6.1283 ­6.1328 ­6.1372 ­6.1415 ­6.1457 ­390 ­6.0530 ­6.0585 ­6.0640 ­6.0693 ­6.0746 ­6.0799 ­6.0850 ­6.0901 ­6.0951 ­6.1001 & ­380 ­5.9945 ­6.0006 ­6.0067 ­6.0127 ­6.0187 ­6.0245 ­6.0304 ­6.0361 ­6.0418 ­6.0475 ­370 ­5.9299 ­5.9366 ­5.9433 ­5.9499 ­5.9564 ­5.9629 ­5.9694 ­5.9757 ­5.9820 ­5.9883 ­360 ­5.8598 ­5.8671 ­5.8743 ­5.8814 ­5.8885 ­5.8955 ­5.9025 ­5.9094 ­5.9163 ­5.9231 P ­350 ­5.7847 ­5.7924 ­5.8001 ­5.8077 ­5.8153 ­5.8228 ­5.8303 ­5.8378 ­5.8452
    [Show full text]
  • Introduction to Thermocouples and Thermocouple Assemblies
    Introduction to Thermocouples and Thermocouple Assemblies What is a thermocouple? relatively rugged, they are very often thermocouple junction is detached from A thermocouple is a sensor for used in industry. The following criteria the probe wall. Response time is measuring temperature. It consists of are used in selecting a thermocouple: slower than the grounded style, but the two dissimilar metals, joined together at • Temperature range ungrounded offers electrical isolation of one end, which produce a small unique • Chemical resistance of the 1 GΩ at 500 Vdc for diameters voltage at a given temperature. This thermocouple or sheath material ≥ 0.15 mm and 500 MΩ at 50 Vdc for voltage is measured and interpreted by • Abrasion and vibration resistance < 0.15 mm diameters. The a thermocouple thermometer. • Installation requirements (may thermocouple in the exposed junction need to be compatible with existing style protrudes out of the tip of the What are the different equipment; existing holes may sheath and is exposed to the thermocouple types? determine probe diameter). surrounding environment. This type Thermocouples are available in different offers the best response time, but is combinations of metals or ‘calibrations.’ How do I know which junction type limited in use to dry, noncorrosive and The four most common calibrations are to choose? (also see diagrams) nonpressurized applications. J, K, T and E. There are high temperature Sheathed thermocouple probes are calibrations R, S, C and GB. Each available with one of three junction What is ‘response time’? calibration has a different temperature types: grounded, ungrounded or A time constant has been defined range and environment, although the exposed.
    [Show full text]
  • Thermocouple Standards Platinum / Platinum Rhodium
    Thermocouple Standards 0 to 1600°C Platinum / Platinum Rhodium Type R & S Standard Thermocouple, Model 1600, Premium grade wire, gas tight assembly, g Type R and Type S No intermediate junctions. g Gas Tight Assembly g Premium Grade Wire The Isothermal range of Thermocouple Standards are the result of many years development. The type R and S standards will cover the range from 0°C to 1600°C. The measuring assembly comprises a 7mm x 300mm or 600mm gas tight 99.7% recrystallized alumina sheath inside which is a 2.5mm diameter twin bore tube holding the thermocouple. The inner 2.5mm assembly is removable since some calibration laboratories will only accept fine bore tubed thermocouples and some applications require fine bore tubing. The covered noble metal thermocouple wire connects the Also available without the physical cold junction - Specify No Cold Junction (NCJ). measuring sheath to the reference sheath which is a 4.5mm x 250mm stainless steel sheath suitable for Model 1600 referencing in a 0°C reference system. Two thermo electrically free multistrand copper wires (teflon coated) Hot Sheath connect the thermocouple to the voltage measuring device. Temperature Range 0°C to 1600°C (R or S) Emf Vs Temperature According to relevant document The thermocouple material is continuous from the hot or measuring junction to the cold, or referencing junction. Response Time 5 minutes Hot Junction see diagram Calibration Dimensions The 1600 is supplied with a certificate giving the error Connecting Cable see diagram between the ideal value and the actual emf of the thermo- couple at the gold point.
    [Show full text]
  • Specifications Overview Compatible Thermocouple Sensors Connecting
    HOBO® U12 J, K, S, T Thermocouple Data Logger (Part # U12-014) Inside this package: Thank you for purchasing a HOBO data logger. With proper care, it will give you years of accurate and reliable • HOBO U12 J, K, S, T measurements. Thermocouple Data Logger The HOBO U12 J, K, S, T Thermocouple data logger has a • Mounting kit with magnet, 12-bit resolution and can record up to 43,000 measurements hook-and-loop tape, tie- or events. The logger accepts J, K, S, and T type wrap mount, tie wrap, and thermocouple sensors, sold separately. The logger uses a two screws. direct USB interface for launching and data readout by a Doc # 13412-B, MAN-U12014 computer. Onset Computer Corporation An Onset software starter kit is required for logger operation. Visit www.onsetcomp.com for compatible software. Specifications Overview J type: 0 to 750 °C (32° to 1382°F) The U12 Thermocouple logger has two temperature channels. K type: 0 to 1250 °C (32° to 2282°F) Channel 1 is for a user-attached thermocouple. Channel 2 is the Measurement S type: -50 to 1760 °C (-58° to 3200°F) logger’s internal temperature, which is used for cold-junction range T type: -200 to 100 °C (-328° to 212°F) compensation of the thermocouple output. The logger can also Internal temperature: 0° to 50°C (32° to record the logger’s battery voltage (Channel 3) if selected. The 122°F) number of channels selected determines the maximum J type: ±2.5°C or 0.5% of reading, deployment time at a given sample interval.
    [Show full text]
  • In-Situ Measurement and Numerical Simulation of Linear
    IN-SITU MEASUREMENT AND NUMERICAL SIMULATION OF LINEAR FRICTION WELDING OF Ti-6Al-4V Dissertation Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in the Graduate School of The Ohio State University By Kaiwen Zhang Graduate Program in Welding Engineering The Ohio State University 2020 Dissertation Committee Dr. Wei Zhang, advisor Dr. David H. Phillips Dr. Avraham Benatar Dr. Vadim Utkin Copyrighted by Kaiwen Zhang 2020 1 Abstract Traditional fusion welding of advanced structural alloys typically involves several concerns associated with melting and solidification. For example, defects from molten metal solidification may act as crack initiation sites. Segregation of alloying elements during solidification may change weld metal’s local chemistry, making it prone to corrosion. Moreover, the high heat input required to generate the molten weld pool can introduce distortion on cooling. Linear friction welding (LFW) is a solid-state joining process which can produce high-integrity welds between either similar or dissimilar materials, while eliminating solidification defects and reducing distortion. Currently the linear friction welding process is most widely used in the aerospace industry for the fabrication of integrated compressor blades to disks (BLISKs) made of titanium alloys. In addition, there is an interest in applying LFW to manufacture low-cost titanium alloy hardware in other applications. In particular, LFW has been shown capable of producing net-shape titanium pre-forms, which could lead to significant cost reduction in machining and raw material usage. Applications of LFW beyond manufacturing of BLISKs are still limited as developing and quantifying robust processing parameters for high-quality joints can be costly and time consuming.
    [Show full text]
  • PFA Insulated Thermocouple Grade Wire
    Thermocouple Grade Wire Single Pair - PFA Insulated A range of PFA insulated single pair Thermocouple Grade Wire available from stock for immediate delivery TC for Temperature Sensing, Measurement and Control PFA Thermocouple Grade Wire PFA Insulated Twisted Pair / PFA Insulated Bonded ‘Bell Wire’ -100°F to +480°F PFA is ideal for higher temperature applications up to 480°F. It is also excellent for cryogenic temperatures down to -100°F Withstands attack from virtually all known chemicals, oils and fluids. All our PFA wire are made in extruded form and are therefore gas, steam and water tight which makes them most suitable for applications such as autoclaves or sterilizers Twisted pair construction with either solid PFA Twisted Pair PFA Twisted Pair PFA Bonded ‘Bell Wire’ or stranded conductors in a range of sizes. One pair of solid conductors One pair of stranded conductors One pair of solid conductors. Ideal for making simple thermocouples PFA insulated. Pair twisted. PFA insulated. Pair twisted. Pair laid flat and PFA sheathed. Oval, bonded construction. Bonded ‘bell wire’ for autoclave applications Stock Number B10 B11 B12 B53 B54 B16 Wire Type (number of strands x AWG) Solid Solid Solid 7x26 7x32 Solid Total Wire Size - AWG (S = Stranded) 32 28 24 26S 24S 24 Total Area (mm2 ) 0.03 0.07 0.2 0.124 0.22 0.2 Insulation PFA PFA PFA CONDUCTORS Number of Pairs 1 1 1 Conductor Configuration Twisted Twisted Parallel PAIRS Shielded No No No Insulation — — — Continuous Insulation -100 to +480 -100 to +480 -100 to +480 Rating (°F) Short Term +570 +570 +570 Color Coding Yes Yes Yes Abrasion Resistance Good Good Good Physical Moisture Resistance Properties Very Good Very Good Very Good OVERALL Typical Weight (lbs/1000ft) (excluding reel) 7 7 7 7 7 7 Diameter under Armor (inches) — — — Diameter over Armor (inches) — — — Overall Diameter† (inches) 0.08” 0.08” 0.08” 0.059” 0.12” 0.037”x0.077” Notes Rejects electromagnetic Rejects electromagnetic Gas, steam and water interference.
    [Show full text]
  • Room Temperature Seebeck Coefficient Measurement of Metals and Semiconductors
    Room Temperature Seebeck Coefficient Measurement of Metals and Semiconductors by Novela Auparay As part of requirement for the degree of Bachelor Science in Physics Oregon State University June 11, 2013 Abstract When two dissimilar metals are connected with different temperature in each end of the joints, an electrical potential is induced by the flow of excited electrons from the hot joint to the cold joint. The ratio of the induced potential to the difference in temperature of between both joints is called Seebeck coefficient. Semiconductors are known to have high Seebeck coefficient values(∼ 200-300 µV/K). Unlike semiconductors, metals have low Seebeck coefficient (∼ 0-3 µV/K). Seebeck coefficient of metals, such as aluminum and niobium, and semiconductor, such as tin sulfide is measured at room temperature. These measurements show that our system is capable to measure Seebeck coefficient in range of (∼ 0-300 µV/K). The error in the system is measured to be ±0:14 µV/K. Acknowledgements I would like to thank Dr. Janet Tate for giving me the opportunity to work in her lab. I would like to thank her for her endless support and patience in helping me complete this project. I would like to thank Jason Francis who made the samples and wrote the program used in this project. I would like to thank the department of human resources of Papua, Indonesia for giving me the opportunity to study at Oregon State University. I would like to thank Corinne Manogue and Mary Bridget Kustusch for all the support they gave me along the way.
    [Show full text]
  • Thermocouple Introduction and Theory
    Reference Temperatures We cannot build a temperature divider as we can a Metal A voltage divider, nor can we add temperatures as we + would add lengths to measure distance. We must rely eAB upon temperatures established by physical phenomena – which are easily observed and consistent in nature. The Metal B International Practical Temperature Scale (IPTS) is based on such phenomena. Revised in 1968, it eAB = SEEBECK VOLTAGE establishes eleven reference temperatures. Figure 3 Since we have only these fixed temperatures to use All dissimilar metals exhibit this effect. The most as a reference, we must use instruments to interpolate common combinations of two metals are listed in between them. But accurately interpolating between Appendix B of this application note, along with their these temperatures can require some fairly exotic important characteristics. For small changes in transducers, many of which are too complicated or temperature the Seebeck voltage is linearly proportional expensive to use in a practical situation. We shall limit to temperature: our discussion to the four most common temperature ∆ α∆ transducers: thermocouples, resistance-temperature eAB = T detector’s (RTD’s), thermistors, and integrated Where α, the Seebeck coefficient, is the constant of circuit sensors. proportionality. Measuring Thermocouple Voltage - We can’t measure the Seebeck voltage directly because we must IPTS-68 REFERENCE TEMPERATURES first connect a voltmeter to the thermocouple, and the 0 EQUILIBRIUM POINT K C voltmeter leads themselves create a
    [Show full text]
  • Thermocouple Temperature Measurement
    Acromag, Incorporated 30765 S Wixom Rd, PO Box 437, Wixom, MI 48393-7037 USA Tel: 248-295-0880 • Fax: 248-624-9234 • www.acromag.com CRITERIA FOR TEMPERATURE SENSOR SELECTION OF T/C AND RTD SENSOR TYPES The Basics of Temperature Measurement Using Thermocouples Part 1 of 3 Copyright © Acromag, Inc. April 2011 8500-911-A10M000 Trademarks are the property of their respective owners. CRITERIA FOR TEMPERATURE SENSOR SELECTION OF T/C AND RTD SENSOR TYPES Part 1 of 3: The Basics of Temperature Measurement Using Thermocouples Background Temperature reigns as the most often measured process parameter in industry. While temperature measurement utilizes sensors of many forms, the actual measurement of temperature is accomplished via only five basic sensor types: Thermocouple (T/C), Resistance Temperature Detector (RTD), Thermistor, Infrared Detector, and via semiconductor or integrated circuit (IC) temperature sensors. Of these five common types, the thermistor is perhaps the most commonly applied for general purpose applications. Semiconductor sensors dominate most printed circuit board or board level sensing applications. Infrared is used for non-contact line-of-sight measurement. But for industrial applications that typically employ remote sensing, thermocouples and RTD’s reign as the most popular sensor types. Most industrial applications require that a temperature be measured remotely, and that this signal be transmitted some distance. An industrial transmitter is commonly used to amplify, isolate, and convert the low-level sensor signal to a high level signal suitable for monitoring or retransmission. With respect to these transmitters, your choice of sensor type is generally limited to T/C, or RTD.
    [Show full text]
  • How to Maximize Temperature Measurement Accuracy
    technicalNOTE How to Maximize Temperature Measurement Accuracy INTRODUCTION Thermocouples are the most versatile and widely used devices for temperature measurements. They are inexpensive, reliable, rugged, and can be used over a wide temperature range. These sensors require cold junction compensation and complex linearization algorithms to achieve good accuracy. The output voltage of thermocouples is very small (tenths of mV) and hence require high gain amplifiers before being fed to the ADC. Any errors and non-linearity in these areas of signal conditioning and amplification will lead to inaccurate measurements. Most test engineers are careful about the measurement errors caused by thermocouples, but not always about the measurement system. Measurement systems are calibrated regularly (typically once per year) at ambient room temperatures and are expected to perform throughout the year with the same accuracies. What if the measurement system is placed where the temperature is not at ambient room temperature? Is the measured data accurate? This application note focuses on this lesser known and important aspect called “Self-Calibration”. Measurement instruments will be highly accurate only when they are compensated for conditions like gain drifting, aging and temperature variations. PRIMARY SOURCES OF ERRORS WITH THERMOCOUPLE MEASUREMENTS Let us look at the Primary Error Sources. They can be broadly categorized as: 1) Errors due to the measurement system 2) Errors due to the thermocouple CJC Errors: CJC error is one of the single largest contributors to overall accuracy. CJC is responsible for compensating the voltage difference as cold junction is not maintained at an ideal zero temperature. WWW.VTIINSTRUMENTS.COM RELIABLE DATA FIRST TIME EVERY TIME technicalNOTE The overall CJC error includes: DID YOU KNOW? The EX10xxA family 1.
    [Show full text]