Waxing Guide 2020–2021 Table of Content

Total Page:16

File Type:pdf, Size:1020Kb

Waxing Guide 2020–2021 Table of Content WAXING GUIDE 2020–2021 TABLE OF CONTENT World’s leading wax technology for over one hundred years . 3 Wax safely . 3 FC Speed powders . 4 Instructions for powders . 5 FC Speed Blocks . 6 Instructions for blocks . 7 Ultra high fluorocarbon glide waxes (UF) . 8 High fluorocarbon glide waxes (HF) . 9 Low flourocarbon race glide waxes race (LFR) . 10 Low fluorocarbon glide waxes (LF) . 11 Special glide waxes . 12 Glide waxes (GW) . 13 Instructions for glide waxes . 14 Liquid glide waxes . 16 Instructions . 21 Liquid grip waxes . 22 Crown- and zero maintenance agents . 23 Skin ski products . 24 Synthetic grip waxes (GS) . 25 Tar grip waxes (GT) . 25 Fluorinated grip waxes (GF) . 26 Grip wax recommendations for race and active skiers . 27 Grip wax recommendations for active and amateur skiers . 28 Fluorinated klisters (KF) . 29 Synthetic klisters (KS) . 30 Cleaning agents . 31 Tools . 32 Alpine tools . 35 Pure Race powders . 38 Instructions for powders . 39 Pure Pro glide waxes . 40 Pure Up glide waxes . 41 Pure One glide waxes . 42 Liquid Pure glide waxes . 44 Pure Cleaning agents . 50 Pure Skin ski products . 51 Ski performance has already been improved for hun- We want waxing to be easy and that does not necessar- dreds of years, at the beginning with natural materials ily need separate waxing facilities . Vauhti’s Liquid prod- for example by using tar . In the 1910s, the Vauhti brand ucts are developed with the same accuracy as the wax was established and its Salaisuus wax was revolutionary combinations used by the world’s top skiers . Waxing is at the time, and a technological innovation that signifi- no longer a barrier to skiing, and you can enjoy cross- cantly improved ski’s glide . The development work that country skiing, downhill skiing, in forests, on mountains begun from Salaisuus wax laid the foundation for the and fells . Finnish culture, will to win, passion, persever- World’s leading wax technology for over one hundred years . 3 world’s oldest ski wax company that continues to oper- ance, integrity, and the newest technology in the indus- ate, and which has always been a pioneer in its industry . try - these are the values and starting points from which Wax safely . 3 the Vauhti products that are used by the world’s top ski- Our products and the technology behind them are FC Speed powders . 4 ers, are created . based on rigorous and long term testing in both lab- Instructions for powders . 5 oratory as well as field conditions . We utilize Finnish FC Speed Blocks . 6 university excellence and laboratories in our research Instructions for blocks . 7 work . Our product development team have a passion to achieve complete knowledge and understanding of Ultra high fluorocarbon glide waxes (UF) . 8 that thin layer between the ski and the snow, where the High fluorocarbon glide waxes (HF) . 9 ski’s performance is optimized in all possible weath- er conditions . Low flourocarbon race glide waxes race (LFR) . 10 Low fluorocarbon glide waxes (LF) . 11 Special glide waxes . 12 Glide waxes (GW) . 13 Instructions for glide waxes . 14 FOR OVER ONE HUNDRED YEARS ONE HUNDRED FOR OVER Liquid glide waxes . 16 Instructions . 21 Liquid grip waxes . 22 Crown- and zero maintenance agents . 23 WORLD’S TECHNOLOGY LEADING WAX Skin ski products . 24 Synthetic grip waxes (GS) . 25 Tar grip waxes (GT) . 25 Fluorinated grip waxes (GF) . 26 Grip wax recommendations for race and active skiers . 27 Grip wax recommendations for active and amateur skiers . 28 Fluorinated klisters (KF) . 29 Synthetic klisters (KS) . 30 Cleaning agents . 31 • Avoid breathing dust / fume / gas / mist / vapors /spray from the waxes . Tools . 32 o Use waxes only in a well-ventilated area . Alpine tools . 35 o Wear appropriate respiratory protection equipped with correct filters: WAX SAFELY WAX Pure Race powders . 38 - P3 type mask should be used when waxed with solid paraffins or top coatings . Instructions for powders . 39 - A2 type mask should be used when waxed with liquid waxes and cleaners . Pure Pro glide waxes . 40 • Must not be exposed to open flame or temperature above 200 °C / 400 °F . Pure Up glide waxes . 41 • Protect hands with category V (standard EN420 and EN374) work gloves, such as nitrile rubber . Pure One glide waxes . 42 Liquid Pure glide waxes . 44 o Wash your hands after waxing . If there are example klister stains on your hands, use ordinary hand cream or grease, which will conveniently remove the klister . Pure Cleaning agents . 50 • Dispose of contents and container in accordance with local and national regulations . Pure Skin ski products . 51 Vauhti Products and Air Travel Bringing the following products on board an airplane is not allowed due to their flammable solvent content . • Wax removers • Cleaning and base preparation fluids • Liquid products 3 Package size: 30G FC SPEED – 100% Fluorocarbon Products and RC SPEED high performance liquid glide waxes . When the SPEED has no limits . Vauhti FC SPEED and RC SPEED products have superb characteristics . They minimize the surface energy of the ski base, making it super-hydrophobic and dirt-repelling . At the same time, they are excellent in cold conditions to reduce dry friction . The speed, glide sensitivity, and durability of these glide waxes are excellent in all weather conditions . With versatile application methods every skier will benefit, even the lightweight skiers . Same products with purified raw materials to comply with ECHA regulations on fluorocarbon substances . FC SPEED POWDERS RCPW FC SPEED WET +10/-3°C | 50/30°F RCPM FC SPEED MID 0/-6°C | 50/30°F For all snow types from wet snow to damp snow . For all snow types, especially on new snow and damp snow . RCPC FC SPEED COLD -6/-20°C | 21/-4°F RCPLDR FC SPEED LDR +5/-20°C | 41/14°F For all snow types on cold conditions . For all snow types, especially in old and man-ma- de snow . Note: • Three powders will cover all weather conditions . • Vauhti LDR is an excellent all-purpose powder and high-end product on old and man-made snow . • FC powders have superior glide as compared to mere fluorinated waxes . The wetter or dirtier is the snow, the bigger is the difference • Remember to use respiratory mask with filter P3 . 4 4 Base preparation for Vauhti FC powders: 1 .Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent . 2 .Use an UF, HF, LFrace or liquid product suitable for the snow type and humidity as a base wax . 3 .Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush . FC SPEED POWDERS Preparation for Powders: • Spread the powder for entire lenght of the glide surface . • Iron the powder approx . 170–180 °C tem- perature . • Move the iron against the base of the ski with speed that melts the powder perfectly . • Cool the skis thoroughly and carefully scrape away excess powder . • Brush by horsehair brush . Continue with ny- lon brush until the surface is even and glossy . • You can also use an analogous roto brushes . NOTE: Open the base structure of the ski with metal brush if needed . 5 Package size: 20G FC Speed blocks are based on the corresponding fluorocarbon powders . FC blocks can be used on top of the liquid glides, base waxes, fluorinated waxes or fluorocarbon powders . Apply into the base with eit- her an iron or cork . FC SPEED BLOCKS FCBW FC SPEED WET +10/-3°C | 50/30°F FCBM FC SPEED MID 0/-6°C | 50/30°F For all snow types from wet snow to damp snow . For all snow types, especially on new snow and damp snow . FCBC FC SPEED COLD -6/-20°C | 21/-4°F FCBLDR FC SPEED LDR +5/-20°C | 41/14°F For all snow types on cold conditions . For all snow types, especially on old and man-made snow . Note: • Blocks fine-tunes the skis; as compared to mere waxing, the difference is considerable . • Suitable for coating liquid quick glides, base waxes, fluorine waxes and powders . • A reasonable alternative for junior competitive skiers . • Affordable – one block can be used to prepare up to 50 pairs of skis . • Cold rubbing is the quickest way to excellent glide after a busy working day . 6 Base preparation for blocks: 1 .Clean the ski base thoroughly with Vauhti Clean & Glide cleaning and maintenance agent . 2 .Use an UF, HF, LFrace or liquid product suitable for the snow type and humidity as a base wax . 3 .Scrape and brush the base wax layer carefully, start with roster or brass brush and polish with nylon brush . FC SPEED BLOCKS Preparation for block: • Apply some product onto the glide surfaces; adhere by roto cork or by natural cork . • Adhere by roto cork or by natural cork . • Let the skis cool down and scrape lightly . • Start brushing with a few roster brush strokes and brush thoroughly with a nylon brush . • When using roto brushes, brush thorough- ly with roto nylon . If required use horsehair roto brush first . Note: In case of longer distances, iron the bottom layer slightly, cool down the skis, scrape carefully, brush the glide surfaces, add another layer, adhere it by cold rubbing, and brush as above . 7 Package size: 45G In UF-series the composition and the content of fluorinated additives are optimized . The composition of wax raw materials have been selected by precise laboratory analysis and numerous field tests . A special pro- duct for different snow types can be found from this series . Especially for artificial snow . UF WET +10/-6°C | 50/-21°F UF WET is a special product for wet snow, works in all snow types .
Recommended publications
  • United States Ski and Snowboard Association
    INTRODUCTION TO SKI RACING: COMPETITION OFFICIAL - ALPINE SEASON 2021 Welcome! This online course has been designed to provide as an introduction to ski racing for parents and new officials and will serve as a foundation for your entry into officiating at an alpine event. Completion of this course, together with current U.S. Ski & Snowboard Alpine Coach/Official or Official membership, is required in order to be certified as a Competition Official (CO). Competition Official certification is one of the prerequisites for certification in the following specialty areas: Chief of Course Chief of Race Jury Advisor – Start and Finish Referee Race Administration Referee Timing & Calculations Technical Delegate New officials should work 1-2 days in each area: Gate Judge, course maintenance under direction of the Chief of Course, assisting the Chief of Race, assisting the Race Secretary, and assisting the Chief of Timing and Calculations. This will provide a good idea of what an individual does or does NOT want to do as an official. Assisting these officials and/or serving in the capacity of a Gate Judge, Jury Secretary, Assistant Starter, Starter, manual timekeeper, course crew, etc., may be recognized for advancement in the Competition Official (CO) category. U.S. Ski & Snowboard Official membership is required for advancement. To complete this course, carefully read each unit and instructions for completing/submitting the required quiz. After completing the quiz, follow instructions email it to your designated Clinic Instructor or your Alpine Officials’ Education Chair; DO NOT email to [email protected]. This will serve as verification of your completion of the clinic requirement for certification as an Alpine Competition Official (CO).
    [Show full text]
  • Basic Technique for Kick Waxing
    Basic Technique for Kick Waxing Both kick and glide waxing are considered art forms in cross-country skiing primarily because of all the subtle additions and variations that can be involved. With volumes of literature and sales pitches available, a beginner can easily get intimidated by all the information and choices. Waxing can be an easy and enjoyable part of the XC skiing experience if you have a few pointers and practice a few times. Here a beginner will find some useful tips for getting started in waxing and a familiarization with the waxing process. This discussion covers only kick waxing, not glide waxing. Why? The Classic motion fundamentally differs from Skating primarily in the way in which we transfer drive from one side of the body to the other. Skating uses an edge to obtain "purchase" in the snow for the weight transfer without any kick wax. In Classic skiing, to obtain "purchase" you must have something underneath the middle third of the ski that will "grab" or "stick" to the snow crystals just enough to provide a launchpad to drive onto the other side. This "something" is either a synthetic "waxless" pattern permanently imbedded in the ski base OR it is some form of "kick wax". In our generally dry snow conditions in the Bulkley Valley, waxable skis are the best choice. Kick wax is only applied to the middle third of a waxable ski known as the "wax pocket" or "kick zone". Kick wax behind the kick zone will only slow down a ski and will not aid in getting kick.
    [Show full text]
  • SKI & SNOWBOARD TOOLS & WAX Tögnar Toolworks 2012-2013 SKI
    SKISKI && SNOWBOARDSNOWBOARD TOOLSTOOLS && WAXWAX TögnarTögnar ToolworksToolworks 2012-20132012-2013 WHY TUNE? Your equipment, like a sportscar, needs to be tuned regularly. Oth- erwise you’ll enjoy only a fraction of the performance you paid so dearly for...sorta like driving a Porsche with bald tires! Basic tuning and waxing isn’t rocket science. It doesn’t take much time to learn. It can save bucks and make your day on the slopes a lot more enjoyable. Armed with some basic tools and information, you can learn to tune and wax achieving the same results that you’d expect from a shop...and enjoy yourself in the process too. Here at Tognar we don’t try to be all things to all skiers and riders...we simply stock all the tuning and waxing stuff you’ll ever need, and provide the helpful info you’ll need as well. See you on the slopes! SKIVISIONS SKI SHARP One of our most popular tools. The SkiSharp files, bevels and pol- ishes both base and side edges simultaneously...instead of one at a time like other bevel tools. It features separate adjustments so you can choose different bevel angles for each edge surface in precise 1/4 degree increments from 0° to 3°. It includes a pair of replaceable mill file inserts for basic filing or beveling needs. Optional inserts include - Carbide Skiver blade (for rapidly “roughing-in” side bevel angles), Green Stones (for new skis/firm snow), Ceramic to sharpen & polish edges.The Stone grit can be refreshed almost indefinately with the proprietary diamond file.
    [Show full text]
  • The Dangers of Fluorinated Ski Waxes
    ECO-JOURNAL January 2021 Julien Lanouette-Babin The Dangers of Fluorinated Ski Waxes Winter is often associated with skiing. To practice this sport, many people apply wax under their skis (or their snowboard) to slide better on slopes and to have a better skiing experience. Last year, a ban on fluorinated waxes was announced by the International Ski Federation council for implementation in the summer of 2021. Many questions have arisen with this new regulation: why was fluoride added to natural wax, what are the main issues caused due to this addition and what are the impacts of the ban on the end user. In this article, I will answer these questions and suggest an ecological replacement for waxing skis. Glide wax (or fast wax) is used to minimize the friction with the snow for both alpine and cross-country skiing. Traditionally, waxes are composed of solid hydrocarbons (such as paraffin). In the case of high-performance waxes, they also contain fluorine to achieve lower friction and high-water repellency than that which is achieved by pure wax alone. Waxes enriched with fluorocarbons or polyfluoroalkyl substances (PFAS) have the Teflon effect. It makes the surface coated with this wax barely stick to the snow, thus increasing the desired sliding effect. On the other hand, the addition of PFAS have negative effects on the environment and on humans. In 2010, after the world’s biggest Nordic ski contest, scientist tested the snow and soil and found them tainted with fluorocarbons, which have been also linked to cancers and liver damage. The Stockholm restrictions on the production and use of PFAS (see article in ASEQ- EHAQ newsletters, August 2020 for more details), bans their use in international competitions.
    [Show full text]
  • Towards Faster Skis: the Development of New Surface Modifications and Treatments to Reduce Overall Friction in Alpine
    Towards faster skis: The development of new surface modifications and treatments to reduce overall friction in alpine skiing. A dissertation submitted to The University of Sheffield Department of Chemical and Biological Engineering For the degree of Doctor of Philosophy in Snowsports Engineering Presented by Richard C Coupe October 2013 Abstract Developments in sport technology have been driven by competition and skiing is no exception. Skiing has evolved over many years making use of new materials and post-treatments methods, but in recent years progress has been limited. The low friction exhibited when sliding over snow and ice is governed by the tribological interaction between ski base and snow and the subsequent accumulation of a thin melt water film. The properties of new, innovative, blended ski base materials and post-treatment methods have been investigated using a range of methodologies. The incorporation of fluorinated hydrophobic silica nanoparticles into current ski waxes has been achieved. These nanoparticles have also been used as nano-abrasives to modify the physical surface structure of a ski base composed of ultra-high-molecular-weight polyethylene (UHMW-PE). Such polyethylene samples were also subjected to other physical treatment methods including abrasion with 120 grit, 800 grit sandpapers and 10-15µm silica particles combined with surface planing. The resultant surfaces were examined under a scanning electron microscope, contact angle tested and friction tested. The surface treatments which tended to be both physically and chemically hydrophobic were found to be beneficial at reducing friction in warm and wet snow conditions (snow temperature above -2°C). The addition of carbon black to UHMW-PE was also found to be beneficial in reducing static friction on snow.
    [Show full text]
  • Advice Wax Accessories Equipment
    WAX FLY TO SUCCESS 85 YEARS OF STORIES & PODIUMS Depuis 1935 nous concevons des farts pour apporter de meilleurs sensations et de meilleurs performances à chacun. Chaque fart est conçu, fabriqué et emballé en France, au pied du Mont-Blanc à Passy. La passion du ski et l’innovation sont des valeurs motrices, transmisent de générations en générations dans l’entreprise. Since 1935 we have been created farts to bring better sensations and better performances to everyone. Each wax is designed, cast and packed in France, at the foot of the Mont Blanc in Passy. The passion of skiing and the innovation are our values that we are transfering from generation to generation in the company. ADVICE Pages 04-13 WA X Pages 14-41 ACCESSORIES Pages 42-61 Other side EQUIPMENT of the catalogue #volaracing 2 3 © AGENCE ZOOM ADVICE WAXING SELECTOR & VIDEOS TUTORIALS Easy To Use Helpfull 100% Fun Download the App ! 4 5 © AGENCE ZOOM CHOOSE YOUR WAX GLIDE WAX ADVICE Kick Wax Fresh Snow Old & Transformed Snow E-Wax MyEcoWax Universal Wax Bases Wax Race Wax Top Finish Wax & Klisters Wax All Snows Dry Wet Dry Wet E-Wax Base VRB Universal Wax Bases Wax : Touring Graphite All T° LF Graphite MX901 X-Hard Hard Medium Soft MX Bleu LF Bleu HF Bleu LF Bleu Moly HF Bleu Moly Cold MyEcoWax Ocean FREE FLUOR RANGES MX Violet LF Violet HF Violet LF Violet Moly HF Violet Moly Moderate MyEcoWax Lavender MX Rouge LF Rouge HF Rouge LF Rouge Moly HF Rouge Moly Race Wax - MX MyEcoWax Intermediate MyEcoWax Ruby MX Jaune LF Jaune HF Jaune LF Jaune Moly HF Jaune Moly Universal Wax Warm
    [Show full text]
  • Ski Wax & Accessories [ 2019-2020 ]
    SKI WAX & ACCESSORIES [ 2019-2020 ] Presentation Since our establishment in 1982, our brand has become a world wide leader, with production strictly Made in Italy, of waxes and acces- sories for the preparation of skis. With our attentive management and marketing organization, we are able to offer a wide range of products suitable for all and any need. We constantly invest in research and innovation, aimed at improving the quality of products, with a quick response to market demands and with respect for the environment. Our collaboration with many national teams is fondamental; supporting them and their special requests , as we are convinced that the best way to test and approve our products is through professional athletes and ski men. Each new product is an opportunity for us to demonstrate a solid background of expertise and put to good use the experience and resources acquired through these years. We are proud to present a new and complete range of products in liquid form which are able to satisfy the needs of world cup athletes for glide and durability, but at the same time they are easy to use even for people who go skiing just for fun . These products can reduce waste to almost zero and prepare skis in record time! All the products in the new “Racing Liquid Wax” range already comply with the new regulations on the use of fluoro which will come into force in June 2020. We are also adapting all our historical products according to these new rules. The already compliant products can be recognized as they bear the “New Fluor Chemestry” logo on the label.
    [Show full text]
  • 2001 Steamboat Pilot Index
    Steamboat Pilot Index 2001 Indexed by Peggy Dorr at Colorado Mountain College Alpine Campus Library 970 970-4451 Summary Headline Comments Date Page Acker, Ann graduates with BA in anthropology from Metro State College in Denver Local students awarded degrees 08/19/01 A6 Acker, Lynn Dale earns master's degree in engineering telecommunications from CU Honors, accolades: University of Colorado at Boulder 07/15/01 A6 Advocates Against Battering and Abuse benefit from Pam Albrecht's bakery desserts Decadent Desserts photo 07/08/01 D2 Advocates Against Battering and Abuse host walk and candlelight vigil Domestic violence awareness vigil planned for Oct. 25 10/14/01 A2 Advocates Against Battering and Abuse receive funds from event at Sheraton, June 17 Group serves up 'Decadent Desserts' 06/10/01 D1 Advocates Against Battering and Abuse vigil flies kids' kites honoring victims Look to the sky 10/21/01 A1 Affordable housing project land has yet to be purchased from ACM Investments West End delays 12/09/01 A1 Ager, Wade studies rangeland science at Rocky Mountain Mennonite Camp near Divide Camping and...Conservation photo 08/12/01 D2 Agricultural Alliance promotes natural resource stewardship, land management goals Alliance links landowners, ag producers 10/28/01 B3 Agricultural Alliance sponsors fence fixing day June 2 to improve farm/city relationship Group urges area residents to mend fences--literally 05/13/01 A2 AgriCultural photography contest awards 4 categories: livestock, people, crops, humor Shutterbug alert 09/02/01 C8 Agricultural Processing Feasibility Grant distributes funds for locally raised products Ag product assistance offered 01/03/01 A3 Agricultural production workshops offer crop experiments and animal management Ag workshops set for Feb.
    [Show full text]
  • WAXROOM SAFETY by Dr
    WAXROOM SAFETY By Dr. Thanos Karydas Technical Director, DOMINATOR Wax “Precaution is better than cure.” - Sir Edward Coke, English judge and politician (1552-1634) During the test phase of the first DOMINATOR waxes in 1993, I visited many World Cup waxrooms and worked closely with the technicians. As a Ph.D. chemist I was surprised by the lack of safety awareness: Air quality was poor, respiratory and eye protection were rarely used, and technicians were waxing for long periods of time without exposure to fresh air. I felt that the technicians must be made aware of the risks so they could effectively protect themselves. On that basis, our company has provided risk-awareness information and advocated safe waxroom practices for the past twenty years. To illustrate our position on waxroom safety, we will take an analytical look at the available scientific literature. The original articles, written mainly by medical and biochemical researchers, are very technical, but we have paraphrased the information so it can be understood by the people that really need to know how to protect themselves. Exposure to Hydrocarbon Waxes During a study which took place in northern Sweden during February 1989, five ski technicians were monitored medically over a five-day period. Study results were reported in a 1992 article, ’’Exposure to Ski-Wax Smoke and Health Effects in Ski Waxers.”1 The authors of the study first looked at hydrocarbon wax vapor concentration in the waxroom. Their findings are shown in Figure 1, in which the green areas indicate what the US government considers safe levels and the red area indicate the levels where respiratory protection is mandated.
    [Show full text]
  • Waxing Guide Contents
    WAXING GUIDE CONTENTS FC POWDERS .................................................................. 4 FC BLOCKS ...................................................................... 6 FC LIQUIDS ...................................................................... 7 FOX GELS ........................................................................ 8 ULTRA FLUOROCARBON GLIDE WAXES (UF) ............ 8 HIGH FLUOROCARBON GLIDE WAXES (HF).............. 9 LF RACE FLUORINATED GLIDE WAXES (LFR) ..........10 LF FLUORINATED GLIDE WAXES (LF) ........................11 GLIDE WAXES (GW) .....................................................12 HARDENING POWDERS ..............................................13 INSTRUCTIONS FOR PARAFFIN WAXES ...................13 LIQUID PRODUCTS ......................................................14 MAINTENANCE AGENTS FOR WAXLESS SKIS .........17 SKIN SKI PRODUCTS.....................................................18 SYNTHETIC GRIP WAXES (GS) ....................................19 TAR GRIP WAXES (GT) ..................................................19 FLUORINATED GRIP WAXES (GF) .............................20 WAXING INSTRUCTIONS TO GF GRIP WAXES ........21 FLUORINATED KLISTERS (KF) .....................................22 SYNTHETIC KLISTERS (KS) ...........................................22 GRIP POWDER ..............................................................23 CLEANING AGENTS .....................................................23 TOOLS ............................................................................24
    [Show full text]
  • Toko Snowboard Tech Manual
    Board Tech Manual 2003/2004 INTRODUCTION When Jakob Tobler founded Toko in 1916, he had no way of imagining what a rapid development lay ahead in ski sport. The tricks and secrets of waxing – together with expert knowledge – over a period of many years of research and development permitted the creation of a wide range of Toko products. For decades, the users of the Toko line could depend on the latest experiences from professional racing continuously being applied in the development of Toko products. What happens in the fringe range between snow and ski today is a research subject for entire scientific institutions. The conversation of this knowledge to speed, gliding comfort, and the care for ski bases is Toko’s very special expertise. Toko has been setting the Ski Wax and Tool world on fire for the past 5-10 years. Toko has quietly pioneered virtually all of the wax technology breakthroughs that have occurred in recent history. Some examples of this include the following: Toko was the first to develop a hand structure tool that allows the waxer to apply an offset structure which channels the water off the side of the ski - Toko Structurite. Toko was the first company to develop and offer a fluorocarbon in block form (Streamline). This product line is carried on by JetStream New and Old Snow Bloc. Toko is still the only company to offer a Copper Brush. The Toko Copper Brush is far softer than any other metal brush on the market yielding fewer (or no) hairs raised as a result of brushing, but is still aggressive enough to get the job requiring a metal brush done properly.
    [Show full text]
  • Holmenkol Waxing Guide
    ® TO THE WAXY WORLD OFHOLMENKOL MEWELCO TO THE WAXY WORLD OFHOLMENKOL 5 the waxmyth The ardent ski jumper, Max Fischer, was once again unsatisfied. As he jumped for the mists from HOLMENKOL today still con- umpteenth time from his favourite hill, the „HOLMENKOLLEN“ near Oslo in Norway, he duct research to find even better raw was convinced that it had to be possible to jump even further. Driven by his boundless material combinations for optimum ambition, Max Fischer (a doctor of chemistry) withdrew to his laboratory and tested for glide properties. But a real HOLMENKOL more than three years until he found the right formula. Skiwax was born. expert is only satisfied with the best. In Fischer named it after his favourite hill: HOLMENKOL. 1999, HOLMENKOL introduced the In 1922, he founded the „Vereinigte Wachswarenfabriken AG“ in Ditzingen, Germany. The pioneering new HYBRID technology to product range at that time included skiwaxes, shoe creams, leather fats, household the wax sector. candles, floor strippers and floor cleansers. The first skiwax product, „HOLMENKOL-MIX“, was manufactured in the same year. LHC (LOBA-HOLMENKOL-CHEMIE) is thus today the By HYBRID technology we mean a spe- oldest existing skiwax manufacturer in the world. cial laboratory process which allows The main demand made on a skiwax at that time was to provide a suitable protective concentrated active ingredients to be coating for the wooden surfaces of the skis, to make them more durable and impermea- filtered out from a wide range of raw ble. For optimum ski preparation, a „ski sole“ was therefore applied which generally materials and to be blended in new for- lasted for one season.
    [Show full text]