Opalite/Golden Beryl Karmic Resolution Therapy 1

Using Opalite/Golden Beryl to Support Karmic Resolution of an Issue or Condition ______

OVERVIEW You place an Opalite/Golden Beryl necklace on the body, using principles of geometry, to help the placement area connect with and resolve its karma.

THERAPY TOOLS • One Opalite/Golden Beryl necklace or Mother Opal Necklace. (Bracelets/therapy strands are not long enough for this therapy.) • GEMFormulas’ Energy Clearing Spray. • GEMFormulas’ Memory Support Spray. • Paper tape.

EFFECTS The causal body, where records of karma reside, has an affinity with geometry. When you lay a gemstone necklace on the body in a geometric shape, its energies will be naturally drawn to the causal aspect—especially if those gemstones have an affinity with the causal body.

When placed on the body, necklaces can be easily shaped into a variety of geometries, both symmetrical and asymmetrical. You will need some paper tape to keep the necklace in place.

When the intelligence centers in the area are aware of the reasons for its underlying health, healing is more likely to take place. The intelligence centers are able to more accurately draw the nutrients and resources required for that healing to occur.

DISCUSSION Locating a Target Point This procedure involves finding a target point. This is the point on the body most clearly associated with the area you want to treat. You can find it by holding your Opalite/Golden Beryl necklace bunched in your hand with its symbiotic Golden Beryl in your fingertips. With the intention to find the target point, circle

Gemstone Therapy Institute Isabelle Morton

2 Module 4 :: Gemandala Protocol

the general area with the gemstones. Soon the circles will begin to get smaller and smaller until they stop at a single point. This is the target point.

If you want to work on an issue or condition that does not have a physical location, think about this issue while you circle the necklace over your body. Your energy field will organize itself so that a physical target point can be identified. This point will serve to connect your body with your issue only for the duration of the session. If you want to work on the same issue or condition another time, repeat the target point location procedure. The target point may have changed.

Working with Symmetry When you arrange the necklace into a certain geometry, you follow the body’s energies so that the body gets the geometry it asks for. Note the shape made. In general, asymmetrical geometries suggest underlying disharmony is present. Symmetrical ones suggest harmony. In Step 7 of the following procedure, you’ll have an opportunity to rearrange the symmetry to a new one. Likely the shape will change. This reflects the shifts that occurred during the application of sprays, Gemstone Therapy, or whatever other application you supplied.

PROCEDURE SYNOPSIS 1. Place the necklace into a geometry based on a target point. 2. Apply sprays, Gemstone Therapy procedures, or other modalities. 3. Rearrange the necklace into a new geometry.

TIME GUIDELINES After about an hour or less, check the necklace to see if it wants to lay in a new orientation. Allow the gems to remain in place for another two to ten minutes.

ADDITIONAL INFORMATION If you substitute a Mother Opal Necklace for Opalite/Golden Beryl, place the Mother Opal sphere on the target point. The Golden Beryl on either side of the Mother Opal sphere will flank it.

You could perform this as a self-therapy. After applying the sprays, contemplate the issue or condition you are treating. Open yourself to receive insights and awareness about the underlying causes and lessons involved. Ultimately, this is the key to karmic resolution.

Gemstone Therapy Institute Isabelle Morton

Opalite/Golden Beryl Karmic Resolution Therapy 3

PROCEDURE: OPALITE/GOLDEN BERYL KARMIC RESOLUTION THERAPY ______

1. Locate the target point of the issue or condition you want to treat. (See Discussion above for how to do this.) 2. Tape the necklace to the body with one of the Golden Beryls on the target point. 3. Lift the short end of the necklace and turn it until you find the geometric orientation in which the body’s energy wants it to lay. It may be a straight line, curved, or angled in some way. Tape the necklace so it stays in the desired position. 4. Repeat Step 3 with the longer end of the necklace. 5. As soon as the necklace is in place, unwanted energies in the area are likely to arise. Apply some Energy Clearing Spray to the area to dissipate them. Spray across the area and the aura above it as needed. 6. To coax additional release, nourish the area with the Memory Support Spray. In this case, hold the Memory Support spray at arm’s length away from the target point and spray toward the area. Then hold the bottle at the target point and directing the nozzle directly up, spraying outward into the aura. This will nourish the energetic counterparts of the target area.

Note for Practitioners on Step 6:

Gemstone Therapy practitioners and students: Apply other Gemstone Therapy procedures, such as the Condition Collection Procedure, Chakra Evaluation and Correction Protocol, or Color Ray Protocol.

Practitioners of other modalities: Apply what you know using the gemstone placement for support.

7. Before the end of the treatment time, remove all the tape except that which secures the original Golden Beryl. Rearrange the rest of the necklace into a new geometry.

Gemstone Therapy Institute Isabelle Morton