PREVENTION, PROTECTION AND SECURING

Adhesive Tape Solutions for the Food Industry Contents

Category Page

Inner packaging 4

Resealable bag closure single-sided solutions 5

Resealable bag closure double-sided solutions 6

Bag sealer 8

Sealing of candy cups 9

Handylift 10

Outer packaging 11

YOUR PARTNER FOR Carton sealing 12 FOOD PACKAGING Frozen food 14

Knifeless opening 16 Choosing the right food packaging is the key to protecting The innovative solutions of our inner packaging prevent and maintaining food. This is also the most reliable way to food from spoiling, making consumption easy, and pleasant. control and protect food against biological and physical Our robust solutions also enable designs that help increase Palletizing of cartons 17 factors. From solutions for single- and double-sided bag consumer brand engagement by allowing consumers to reclosure, to bag and candy cup sealing, innovative carton use the original packaging after opening the product. Just box closures,­ and palletizing, we provide a full assortment as critical as the inner packaging is the outer packaging. Dispenser 18 for the global packaged consumer goods industry. Our outer packaging solutions provide a full assortment of packaging tapes to protect products when exposed to critical As a global partner to various food industry enterprises, we environmental conditions during storage and transportation. Dispenser for bag sealing 19 offer a wide range of food packaging assortments to match Convenient packaging solutions have been identified as a the needs of individual customers for both inner and outer­ key factor in the consumer’s product selection process; do packaging. not leave the packaging to chance. Dispenser for carton sealing 20

2 Introduction Contents 3 RESEALABLE BAG CLOSURE SINGLE-SIDED SOLUTIONS Solution for Convenient Reclosure

tesa® Lift & Reseal

Our tesa® Lift & Reseal single-sided resealable bag closure system off ers approximately 20 eff ective reclosure actions, giving consumers the ability to reseal the pack for the lifetime of its contents. Alongside the possibility of adding value to your end product, tesa® Lift & Reseal is developed to be easily integrated into the packaging process. Whether you are packing nuts, snacks, fruits, or vegetables, tesa® Lift & Reseal is a convenient reclosure solution to keep them fresh.

Features of tesa® Lift & Reseal • High-tack tape with good shear strength, enabling eff ective reclosure that will not pop open • Robust and stable – no residues, good aging resistance • Custom printed fi ngerlift strip for easy peel back • Supplied spool wound, for rapid integration on the production line • A full and complete solution including the tape and a tesa® 6081 dispenser, with no impact on your INNER PACKAGING running speed Our Products for Inner Packaging Applications tesa® 6081

Technical Spool dispenser with brake and buff er system tesa® 6081 properties • Unwind tape from spools in a controlled way. Guide the Core tape precisely and without damage to the lamination unit 6 inch Inner packaging applications require the most attention, as requirements, we are looking forward to providing you with diameter • The brake and buff er system allows a high lamination your end customers are in direct contact with them. There- distinguishable inner packaging solutions. For example, Length 900 mm speed and compensates for variations in line speed fore, they need products that provide secure packaging, with our single- and double-sided bag reclosure solutions, due to cutting processes, etc. while off ering attractive and convenient handling or resea- your product packaging will be safe and convenient for end Width 450 mm • Easy operation and little set-up time translates into ling of your product‘s packaging. Whether they require a customers. effi cient processes food safe approval for indirect food contact or other special Height 700 mm Main applications Weight 22000 g Many customers worldwide have proven the reliable taping Type of Machine process. Commonly used by producers of aluminium profi les, applicator MDF trims, and magnetic strips.

4 Inner Packaging Inner Packaging 5 RESEALABLE BAG CLOSURE DOUBLE-SIDED SOLUTIONS Find the right resealable double-sided bag closure option Solution for Convenient Reclosure Technical properties tesa® 4917 tesa® 6917 tesa® 64621 PV0 tesa® 64621 PV6

Depending on your production requirements, we off er you a full assortment of diff erent double-sided resealable bag closure solutions. The main advantage of our reclosure tapes Tape is the long-lasting freshness achieved by its tight clo sure. All products are available with and without a liner with over- hanging fi ngerlift, which off ers convenient liner removal. Our product alternatives enable that we can off er a suitable solution for all kinds of bags. Backing material PP fi lm PP fi lm PP fi lm PP fi lm

Features of our double-sided resealable bag closures Total thickness 90 µm 90 µm 90 µm 90 µm • Strong and stable acrylic or synthetic rubber adhesive

• No residues, excellent aging resistance Type of adhesive Tackifi ed acrylic Tackifi ed acrylic Synthetic rubber Synthetic rubber • Extended fi ngerlift liner available for easy liner removal • Supplied spool wound, for rapid integration on the to steel (after 14 days) 11.4 N/cm 11.4 N/cm 15.0 N/cm 15.0 N/cm production line Adhesion to PE (after 14 days) 4.1 N/cm 4.1 N/cm 6.5 N/cm 6.5 N/cm

Temperature resistance 120°C 120°C 80°C 80°C tesa® 4917 tesa® 6917 tesa® 64621 PV0 tesa® 64621 PV6 (short term)

Temperature resistance 80°C 80°C 40°C 40°C Double-sided fi lmic tape Double-sided fi lmic tape Double-sided fi lmic Double-sided fi lmic tape (long term) with diff erential adhesive with diff erential adhesive tape with and without with fi ngerlift system, without fi ngerlift system and fi ngerlift fi ngerlift Stable red fi lmic liner of tesa® Diff erential adhesive Yes Yes No No tesa® 4917 consists of a trans - tesa® 6917 has been de- tesa® 64621 PV0 is a trans- 64621 PV6 leads to an easy parent double-sided PP fi lm si gned for resealable fi lmic parent double-sided self- automatic application pro- Tack ••• ••• •••• •••• with a diff erential adhe sive bags. It consists of a trans- adhesive tape consisting of cess. A long spool length of system. The product can parent double-sided PP fi lm a PP backing and a syn- 8000 m leads to fewer ma- Aging resistance (UV) •••• •••• •• •• easily be cut with the hot with a diff erential adhesive thetic rubber adhesive (SIS). chine stops and contributes wire systems of common system. The product can tesa® 64621 PV0 is solvent- to an effi cient production Humidity resistance •••• •••• ••• ••• bag machine producers. easily be cut with the hot free and off ers a very high process. The translucent wire systems of common tack. tesa® 64621 PV6 liner can Static sheer resistance at 23°C ••• ••• •• •• Main applications bag machine producers. show written instructions on Static sheer resistance at 40°C • Reopenable closure tesa® 6917 comes with Main applications food packaging. ••• ••• • • system for fi lmic bags fi ngerlift (extended liner) for • Reopenable closure Color Transparent Transparent Transparent Transparent • Removable emblems or convenient liner removal. system for fi lmic bags Main applications profi les • General purpose fi xing • Reopenable closure Type of liner PP PP Glassine PP Main applications tape system for fi lmic bags

• Reopenable closure • Self-adhesive mounting • General purpose fi xing Color of liner Red Red Yellow Red system for fi lmic bags of decorative and tape

• Removable emblems or packaging materials • Self-adhesive mounting of Fingerlift No Yes Yes/No Yes profi les • Bonding of foils, fabrics, decorative and packaging paper, and materials Thickness of liner 80 µm 80 µm 70 µm 80 µm materials • Bonding of foils, fabrics, paper, and plastic materials Evaluation across relevant tesa® assortment: •••• Very good ••• Good •• Medium • Low

6 Inner Packaging Inner Packaging 7 BAG SEALER SEALING OF CANDY CUPS Secure Closure with Bag Sealing Tapes Colorful Solutions for Sealing Candy Cups

Bakery products, candies, and other consumables that are Classic candy tins must be sealed with a layer of adhesive packed in bags require a reliable closure. With our bag tape. We off er reliable solutions for their closure during sealing tapes we off er suitable solutions here. Furthermore, trans portation until they reach the end customer. Our trans- we provide supplementary dispensers for effi cient operations. parent versions are most commonly used in this application, but we also off er a wide range of colors. Features of our bag sealer • For sealing small boxes and cans Features of candy cup sealing • Use at bakery and fl ower shop counters • Sealing small boxes (cardboard or plastic) • Available in transparent and diff erent colors • Sealing tins and bags • A full and complete solution including • Available in transparent and diff erent colors the tape and a tesa® 6094 dispenser • tesa® 4104 red enables sharp-edge masking for multicolor painting

Total Backing Adhesion thickness [µm] Tensile Elongation Product description Tape Main application to steel strength at break Color and application [N/cm] Backing [N/cm] [%] Adhesive thickness [µm]

tesa® 4104 colored • Sealing small Brilliant colored filmic boxes (card- Black packaging tape PVC fi lm 67 board or plastic) White tesa® 4104 is a premium • Sealing tins and Red packaging tape based on a bags 3.6 60 60 Orange PVC-film backing and a natural Total • Variety of colors Yellow Backing Adhesion Tensile Elongation rubber adhesive. It shows thickness [µm] available make Natural Blue Product description to steel strength at break Color excellent performance on 40 Tape Main application tesa® 4104 ideal rubber Green and application [N/cm] Backing [N/cm] [%] all kinds of cardboards and Adhesive thickness [µm] secures a safe closure. for marking

• Sealing small • Sealing small tesa® 4204 PV0 boxes and cans White* tesa® 4204 PV0 boxes and cans White* Colored filmic packaging tape PVC fi lm 59 Red Colored filmic packaging tape PVC fi lm 59 Red • Use at bakery • Use at bakery tesa® 4204 PV0 is based on Yellow tesa® 4204 PV0 is based on Yellow and flower shop and flower shop a stable PVC backing coated Blue a stable PVC backing coated Blue counters 2.0 50 75 counters 2.0 50 75 with a natural rubber adhesive. Green with a natural rubber adhesive. Green • Suitable for This product can generally Havana* This product can generally • Suitable for Havana* marking based Natural marking based Natural be used on all common desk 32 Trans- be used on all common desk 32 Trans- on the variety of dispensers. rubber parent* dispensers. on the variety of rubber parent* colors colors

tesa® 4205 tesa® 4205 Transparent small item Transparent small item packaging tape PP fi lm 45 packaging tape PP fi lm 45 tesa® 4205 is based on a • Sealing of small tesa® 4205 is based on a • Sealing small 28 µm PP backing coated with 28 µm PP backing coated with boxes or cans Trans- boxes and cans Trans- a natural rubber adhesive. 2.5 43 145 a natural rubber adhesive. 2.5 43 145 • Bundling of small parent • Bundling of small parent This product design provides This product design provides items items good properties for sealing good properties for sealing Natural Natural applications of small items. 28 applications of small items. 28 rubber rubber tesa® 4205 can be used on all tesa® 4205 can be used on all common desk dispensers. common desk dispensers.

* tesa® 4204 white, havana, and transparent have other technical data. * tesa® 4204 white, havana, and transparent have other technical data.

8 Inner Packaging Inner Packaging 9 HANDYLIFT Carrying Handle for Convenience

While carrying water bottles or other products with a high weight, a strong and comfortable handle tape is required. Our tesa® handylift off ers you an effi cient solution that allows you to run a fast production process while reducing downtime. This high-quality product is suitable on almost all kinds of wrapping material, ensuring a reliable bond.

Our tesa® handylift product consists of a strong MOPP tape (Mono-axially Oriented Polypropylene) with an laminated, non-sticky, and printable foam, foil, or paper.

Features of handylift • Pre-material for carry handles • Applicable for weights up to 18 kg • High-quality natural rubber adhesive • Handle can be custom printed

Adhesion Total Tensile Elongation Main Backing Tape Product description and application to steel thickness strength at break application Adhesive [N/cm] [µm] [N/cm] [%]

tesa® 64285 Tensilized polypropylene tape • Pre-material MOPP tesa® 64285 is a tensilized polypropylene tape for handylift OUTER PACKAGING with a natural rubber adhesive. It exhibits good • Palletizing, 4.0 72 180 35 tensile strength with low elongation at the same adhering, or Our Products for Outer Packaging Applications time. The product is especially recommended for bundling are Natural handylift applications. It provides residue-free also possible rubber removal and no discoloration.

• Pre-material tesa® 64286 for handylift Strapping tape for basic applications MOPP • Palletizing After all the eff orts you spend on designing and producing carton box sealing up to knifeless opening innovations allow tesa® 64286 is a tensilized polypropylene • Reinforcing strapping tape with a hot melt adhesive system. 7.5 73 175 35 quality products, they should be secured by an effi cient and you to fi nd the right packaging tape within our assortment. It has good tensile strength with low elongation • Closing of reliable shipping case. Our solutions for outer packaging We also have solutions for securely closing cardboard at the same time. The product shows a high shipping Synthetic peel adhesion. cartons is rubber applications allow you to do both, while off ering state-of- boxes to be stored in cold temperatures. Especially also possible the-art packaging features. We provide various solutions for ben efi cial is our newest sealing tape, which allows you to diff erent shipping and storage environments. Solutions for open carton boxes without a knife, thus removing the risk of the transportation of shelf-ready packages over standard damaging the contents of the box.

10 Inner Packaging Outer Packaging 11 CARTON SEALING Safe Journey, Safe Arrival – Our Assortment Allows Release layer on backing That Your Products Reach Their Destination Intact The unwinding properties are dependent on this layer.

Secure packaging is the primary requirement for ensuring that a product reaches its destination intact. Whether the carton Backing is light or heavy, traveling a short distance by rail, or taking a long journey by ship, we have developed our current packaging Provides tear and elongation characteristics. tape range to meet every requirement for the sealing of carton boxes. We provide a wide assortment for carton sealing • Polypropylene (BOPP) including tape dispensers that make your packaging effi cient and reliable. • Polyvinylchloride (PVC) • Paper Features of carton sealing • Manual and automatic sealing of light and medium-range weight cartons • Easy to unwind and suitable for use in hand dispensers or packaging machines Primer • A full and complete solution including the tape and a tesa® 6400 dispenser Responsible for anchorage of adhesive to backing material.

Adhesive Its shear and adhesion properties are essential for carton closure performance. • Synthetic rubber (hot-melt) • Natural rubber • Water-based acrylic

Which is the right carton?

Corrugated quality – the diff erences

Adhesion Total Tensile Elongation Different weights require different Main Backing Tape Product description and application to steel thickness strength at break boxes made of different kinds of application Adhesive [N/cm] [µm] [N/cm] [%] cardboard. Certainly lightweight

• tesa® 4120 is and mid to heavy goods are better tesa® 4120 used for PVC fi lm General purpose carton sealing tape protected in a double fl ute or triple manual tesa® 4120 is a packaging tape based on a fl ute box, but hazardous goods should sealing of 2.0 49 43 75 PVC film backing and a natural rubber adhesive. cartons of be packed in triple fl ute boxes. (Note: tesa® 4120 can be used in manual and automatic medium- Natural sealing equipment. Certain provisions are mandated by < 20 kg single fl ute < 40 kg double fl ute < 100 kg triple fl ute range weight rubber regional law!) The following illustrations for normal light weights for mid to heavy loads for extremely heavy loads show the difference between the • Manual and tesa® 4280 corrugated qualities: automatic PP fi lm Carton sealing tape sealing of tesa® 4280 is a self-adhesive tape based on light and 4.8 42 40 145 25 µm PP-film and a synthetic rubber adhesive. medium- The product is available in 2 colors and is noisy range weight Synthetic Diff erent qualities, diff erent fl ap Paper quality testliner to unwind. cartons rubber pressures Testliner is always made entirely from recycled materials. This rough paper has Different cardboard qualities have only short fi bers, thus making this box less stable when compared to kraftliner. tesa® 4313 PV0 • Manual and diff erent fl ap pressures. The pictures Paper High performance paper carton sealing tape automatic show, from left to right, single fl ute to Kraftliner It can be used for a wide variety of different sealing of cardboard qualities. Seals can resist short-term light and 7.5 107 50 8 triple fl ute cartons with a 2.0 kg weight Kraftliner is produced not only from recycled materials, but also from new materials, shocks as the elongation of the paper is very high. medium- on them. The higher the fl ap pressure, which contain long fi bers. These provide optimal stability, but the cardboard is The product is easy to unwind and suitable for use range weight Synthetic in hand dispensers or packaging machines. cartons rubber the greater the requirements of the more expensive. You can easily identify the kind of liner by checking the color. tape. Paper made from wood is normally browner.

12 Outer Packaging Outer Packaging 13 FROZEN FOOD BOXES Find the right carton sealing tape for frozen food Securing Carton Box Closure in Cold Environment Technical properties tesa® 4089 PV6 tesa® 4100 tesa® 4120 tesa® 4122 tesa® 4124

Tape

To ensure a strong bond while storing or transporting Backing material PP film PVC film PVC film PVC film PVC film refrigerated food Total thickness 46 µm 65 µm 49 µm 88 µm 65 µm Features of frozen food boxes Backing thickness 28 µm 48 µm 30 µm 60 µm 38 µm • Excellent performance on all kinds of cardboard

• Safe closure of medium- and heavy-weight cartons Type of adhesive Natural rubber Natural rubber Natural rubber Natural rubber Natural rubber • Smooth and easy unwinding • Ideal for use in hand dispensers and Adhesion to steel 2.2 N/cm 2.2 N/cm 2.0 N/cm 2.0 N/cm 3.2 / 2.3 N/cm* automatic sealing equipment Elongation at break 145% 75% 75% 100% 60%

Tensile strength 43 N/cm 47 N/cm 43 N/cm 65 N/cm 60 N/cm

Automatic application Yes Yes Yes Yes Yes

Printability No •••• •••• •••• ••••

Low noise unwinding No Yes Yes Yes Yes

White, havana, White, havana, White, havana, Havana/Chamois, White, havana, Color transparent transparent transparent transparent transparent* Suitable for dangerous Suitable for dangerous Specials – – – goods < 45 kg goods < 15 kg

Evaluation across relevant tesa® assortment: •••• Very good ••• Good •• Medium • Low * tesa® 4124 transparent tesa® 4089 PV6 tesa® 4100 tesa® 4120 tesa® 4122 tesa® 4124

General purpose carton sealing tape General purpose carton sealing tape General purpose carton sealing tape Heavy duty carton sealing tape Premium general purpose tesa® 4089 PV6 is based on a 28 µm tesa® 4100 is based on a PVC backing tesa® 4120 is a packaging tape based tesa® 4122 is a premium packaging carton sealing tape PP backing with a natural rubber coated with a natural rubber adhesive. on a PVC-film backing and a natural tape based on a very strong PVC back­ tesa® 4124 is a premium packaging adhesive. Due to its embossed film texture, even rubber adhesive. tesa® 4120 can be ing and a natural rubber adhesive. Even tape based on a PVC-film backing and and smooth unwinding is guaranteed. used on manual and automatic sealing heavy boxes or boxes with multiflute­ a natural rubber adhesive. It shows Main application The embossed surface also prevents­ equipment. cardboard with high flap tension can excellent performance on all kind of Manual and automatic sealing of light reflection during e.g. barcode­­ reading, be closed safely. External tests have cardboards and secures a safe closure­ and medium-range weight cartons. for example; therefore, the product is Main application proven that the process of cardboard of medium and also heavy-weight perfectly suited to label protection. tesa® 4120 is used for manual sealing waste recycling will not be disrupted. car­tons. tesa® 4124 unwinds smoothly of cartons of medium-range weight. and noiselessly, which makes it ideal Main application Main application for use in hand dispensers and auto- tesa® 4100 is used for manual and tesa® 4122 is designed to close very matic sealing equip­ment. automatic sealing of cartons of medium heavy cartons or boxes with hazardous range weight. content. Main application tesa® 4124 is used for manual and automatic sealing of cartons of medium range weight.

14 Outer Packaging Outer Packaging 15 KNIFELESS BOX PALLETIZING OF OPENING CARTONSSEALING OF CANDY CUPS Opening Cartons Without a Knife Palletizing Tapes for Shelf-Ready Packaging

Premium products often come with premium packaging. Before loose or packaged goods can be transported, they Those being bundled in carton boxes are exposed to a need to be bundled or palletized. To prevent consignments severe danger – the carton box being opened with knives or from slipping, moving, and shifting, especially strong tapes blades. The premium packaging or even the top layer of the with sturdy backings, allowing only minimal elongation while product itself is often damaged by the knives. Our knifeless under pressure from mechanical and environmental stress, box opening solution off ers reliable and tamper-evident are needed. In addition, excellent adhesion is required in sealing, while being openable by hand. We can provide this order to make sure the tape stays in place on a variety of solution in diff erent designs and qualities such as easy substrates, ranging from cardboard, metal, and , to unwinding long rolls for automatic application units as well as diffi cult surfaces such as shrink-wraps and protective fi lms. short rolls for smooth manual application in a hand dispenser. Features of palletizing Also use our new knifeless box closing solution in production • Securing of pallets with printed or labeled processes of candies or other consumables to guarantee carton boxes that residue from the carton box or plastic bag material • Does not damage the surface after its removal being cut does not fi nd its way into the process. • Barcode readable during picking and packing due to translucent backing Features of knifeless box closure • Easy opening without any tools • Avoids cutting into your valuable goods • No contamination or damage of the inner packaging • Tamper-evident sealing • Easy application with our tesa® 6075 hand dispenser

Total Adhesion Tensile Elongation Backing Adhesion Total Tensile Elongation thickness [µm] Additional to steel strength at break to steel thickness strength at break Color Tape Product description and application Adhesive information Tape Product description and application [N/cm] Backing [N/cm] [%] [N/cm] [µm] [N/cm] [%] thickness [µm] Adhesive

tesa® 51128 45 Soft tensilized polypropylene MOPP tesa® 4190 Fingerlift tesa® 51128 is a tensilized polypropylene strapping Knifeless box opening, with fingerlift Synthetic for Trans- 4.8 43 145 tape with a special solvent-free natural rubber 1.0 60 106 30 This solution offers reliable and tamper-evident rubber knifeless parent adhesive system. tesa® 51128 does not damage the sealing, while being openable by hand. opening Natural 28 surfaces of typical printed or labeled carton boxes after its removal. rubber

16 Outer Packaging Outer Packaging 17 DISPENSER FOR BAG SEALING Bag Sealing Tapes That Close Paper and Plastic Bags Securely

tesa® 6094

Bag sealing dispenser Technical properties tesa® 6094 Any plastic or paper bag with a twisted Core diameter 3 inch neck diameter of up to 11 mm can be sealed eff ectively using the tesa® 6094 Type of tape Single-sided bag sealer. Recommended tesa® prod- Length 210 mm ucts: fi lmic tape, tesa® 4104 or paper Width 85 mm tape, tesa® 4328. Height 205 mm

Mode of drive Manual

Weight 1350 g

Max. roll diameter 170 mm

Type of applicator Table

Max. roll width 19 mm

tesa® 6256

Bag sealing dispenser Technical properties tesa® 6256 Any plastic or paper bag with a twisted Core diameter 3 inch DISPENSER neck diameter of up 6 mm can be sealed With tesa® Dispensers Your Production Processes eff ectively using the tesa® 6256 bag Type of tape Single-sided Will Be Optimized sealer. Recommended tesa® prod ucts: Length 185 mm fi lmic tapes, tesa® 4104 or 4205; paper Width 70 mm tape, tesa® 4328. Height 270 mm

Mode of drive Manual As a world leading supplier of self-adhesive products and place friendly and suitable for perfect working ergonomics. Weight 610 g solutions, we off er you a large variety of tapes and at the Our Application Solution Center’s dedicated experts are same time assist your working processes with professional always ready to help you with any application-related question Max. roll diameter 130 mm dispensers that match tesa® tapes perfectly. These were or problem. Type of applicator Table developed by collaborating with users, making them work- Max. roll width 12 mm

18 Dispenser Dispenser 19 DISPENSER tesa® 6300 Professional packaging Technical properties tesa® 6300 hand dispenser Core diameter 3 inch The tesa® 6300 hand dispenser is a FOR CARTON SEALING Length 150 mm robust industrial device that takes Safe Journey, Safe Arrival – Our Assortment Allows tesa® packaging tapes up to 50 mm Width 65 mm That Your Products Reach Their Destination Intact wide. Its system of 2 application rollers Height 240 mm off ers easy handling and special blade Weight 350 g

protection for safety. The tape is cut by Max. roll diameter 120 mm pressing the trigger on the handle. The Type of applicator Hand continuously adjustable tension con trol allows correct dispensing, even of Max. roll width 50 mm easy to unwind tesa® tapes. The soft tesa® 6005 gummed handle ensures a secure and comfortable grip. Professional packaging Technical properties tesa® 6005 hand dispenser Core diameter 3 inch The tesa® 6005‘s system of 2 applica- tesa® 6400 Length 220 mm tion rollers off ers easy handling and Width 45 mm special blade protection for safety. The Dispenser COMFORT for Technical properties tesa® 6400 tape is cut by pressing the trigger on Height 210 mm packaging tapes Core diameter 3 inch the handle. The dispenser is equipped Weight 530 g The tesa® 6400 hand dispenser is a Length 220 mm with a continuously adjustable tension Max. roll diameter 170 mm robust industrial device that applies control. The brake can be tightened tesa® tapes up to 50 mm wide. Its sys- Width 60 mm Type of applicator Hand when tight “strapping” of the tape tem of a covered blade provides spe- Height 220 mm Max. roll width 25 mm around a package is desired. cial injury protection (blade protection). Weight 500 g The tape is cut by pressing the fl ap on Max. roll diameter 140 mm the tape while the serrated cutting Type of applicator Hand tesa® 6075 blade will “pop out” to cut the tape. The continuously adjustable tension Max. roll width 50 mm Professional packaging Technical properties tesa® 6075 control allows correct dispensing, even hand dispenser of easy unwinding tesa® tapes. tesa® Core diameter 3 inch The tesa® 6075 hand dispenser is a 6400 has a soft gummed handle, which Length 210 mm robust industrial device that takes ensures a comfortable and secure grip. tesa® packaging tapes up to 75 mm Width 90 mm wide. Its system of 2 application rollers Height 210 mm off ers easy handling and special blade Weight 690 g tesa® 56402 protection for safety. The tape is cut by Max. roll diameter 170 mm pressing the trigger on the handle. The Packaging hand dispenser superior Technical properties tesa® 56402 Type of applicator Hand continuously adjustable tension con trol snapshot 50 Core diameter 3 inch allows correct dispensing, even of Max. roll width 75 mm The tesa® 56402 hand dispenser is a Length 205 mm easy to unwind tesa® tapes. The soft robust industrial device that takes gummed handle ensures a secure and tesa® tapes up to 50 mm wide. Its Width 65 mm comfortable grip. system of 2 application rollers off ers easy Height 205 mm handling and special injury protection Weight 665 g (blade protection). The tape is cut by Max. roll diameter 170 mm pressing the trigger on the handle. The Type of applicator Hand continuously adjustable tension con trol allows correct dispensing, even of Max. roll width 50 mm easy to unwind tesa® tapes. The soft gummed handle ensures a secure and comfortable grip.

20 Dispenser Dispenser 21 WORLDWIDE PRESENCE

APPLICATION SOLUTION CENTER Technical Customer Service Is Our Top Priority

We offer you a wide range of products supporting you in all of Not only do we recommend the suitable products, we also your business fields. Many options often require a closer look support the implementation stage of our solutions into your into the specific application. Here we can support you by customers’ process with application tools and equipment. taking into account the customers’ materials, their application Headquarters process, and the operating conditions for the product in use. Based on our modular training program, we individually teach you and your customers about the adhesive tape Plants From a range of several hundred adhesive tape solutions, technology, along with our products, their applications, and O ces we select the right product for your customers’ application corresponding tools. This can either be done at our techni- while considering their specific requirements. cal training facilities or even as on-site training on your premises. In our Application Solution Centers we analyze customers’ materials, in combination with our adhesive tape products, Our global network of application engineers collaborate depending on the application-specific demands, such as closely to provide short response times and close customer bonding power, shock absorption, resistance to environmental contact, offering you many years of experience and expertise impacts, removability, and much more. in adhesive tape products and applications. tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered During on-site visits, we assist you in detecting such require- Our Sales team will assist you in directing your inquiries to as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, express or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit ments and translate those into appropriate test programs. our Application Solution Centers. for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be glad to support you.

22 Service tesa Group 23 03/2018

Our management system is certified according to the standards ISO 9001, ISO/TS 16949, and ISO 14001.

tesa SE Phone: +49 40 88899 0 tesa.com/company/locations tesa.com